add example usage

* add regmap Device8I2C/SPI types and their methods
* add endianess hint

.github/FUNDING.yml

@@ -0,0 +1,2 @@
+# These are supported funding model platforms
+open_collective: tinygo

.github/workflows/build.yml

@@ -11,10 +11,13 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: tinygo/tinygo-dev
+    container: ghcr.io/tinygo-org/tinygo-dev:latest
     steps:
+      - name: Work around CVE-2022-24765
+        # We're not on a multi-user machine, so this is safe.
+        run: git config --global --add safe.directory "$GITHUB_WORKSPACE"
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
       - name: TinyGo version check
         run: tinygo version
       - name: Enforce Go Formatted Code

CHANGELOG.md

@@ -1,3 +1,439 @@
+0.33.0
+---
+- **new devices**
+    - **ens160**
+        - Add ens160 i2c driver
+    - **lsm303dlhc**
+        - added support for LSM303DLHC e-Compass; (#783)
+    - **seesaw**
+        - add support for Adafruit Seesaw encoders
+
+- **enhancements**
+    - **ws2812**
+        - add RP2350 support
+    - **ssd1306**
+        - avoid unnecessary heap allocations (#767)
+    - **gps**
+        - allow gps init with address
+    - **lsm6ds3tr**
+        - avoid unnecessary heap allocations (#766)
+
+- **bugfixes**
+    - **gps**
+        - Fix gps time calculation (#785)
+
+
+0.32.0
+---
+- **enhancements**
+    - **bmp280**
+        - remove alloc on read sensor data
+    - **ws2812**
+        - add 200MHz support for the Cortex-M0/rp2040
+
+- **bugfixes**
+    - **ssd1306**
+        - remove time.Sleep from SSD1306 SPI transfer code
+    - **tmc2209**
+        - tmc2209 bug fixes (#755)
+
+- **docs**
+    - **contributing**
+        - add driver design pointer to CONTRIBUTING.md
+
+
+0.31.0
+---
+---
+- **enhancements**
+    - **spi**
+        - update all SPI usage to use either *machine.SPI or drivers.SPI
+
+
+0.30.0
+---
+- **new devices**
+    - **comboat**
+        - Add wifi driver comboat for Elecrow W5 rp2040 and rp2350 devices (#741)
+    - **max6675**
+        - Add MAX6675 device
+    - **TMC2209**
+        - Added TMC2209 support (#727)
+    - **TMC5160**
+        - Added TMC5160 support (#725)
+    - **sharpmem**
+        - Add sharpmem (#724)
+
+- **enhancements**
+    - **net**
+        - move to latest golang.org/x/net v0.33.0 (#732)
+    - **microphone**
+        - update microphone driver to use latest i2s interface
+
+- **bugfixes**
+    - **net**
+        - fix typo in DHCP error message
+    - **aht20**
+        - Fixed bug in aht20 driver
+    - **hub75**
+        - fix data buffering
+
+
+0.29.0
+---
+- **new devices**
+    - **epd1in54**
+        - Waveshare 1.54inch B/W e-Paper display (#704)
+    - **touch**
+        - add capacitive touch sensing on normal GPIO pins
+    - **INA219**
+        - I2C INA219 driver (#705)
+    - **pcf8591**
+        - add ADC only implementation for I2C ADC/DAC (#690)
+
+- **enhancements**
+    - **pixel**
+        - add NewImageFromBytes() function to allow creating image from existing slice
+    - **servo**
+        - Add function `SetAngleWithMicroseconds` (#695)
+    - **onewire**
+        - onewire improvements
+    - **ssd1306**
+        - Add function `SetFlip` and `GetFlip` (#702)
+    - **uc8151**
+        - add FillRectangle() and SetScroll() functions to satisfy tinyterm.Displayer interface
+    - **ssd1306**
+        - add FillRectangle() and SetScroll() functions to satisfy tinyterm.Displayer interface
+
+- **bugfixes**
+    - **pixel**
+        - fix Monochrome setPixel
+
+- **docs**
+    - **readme**
+        - discuss need to change variables in examples
+    - **sponsor**
+        - Add sponsor button to key repositories
+
+
+0.28.0
+---
+- **new devices**
+    - **epd2in66b**
+        - Waveshare 2.66inch E-Paper Display Module (B) for Raspberry Pi Pico (#673)
+    - **mcp9808**
+        - Add driver for MCP9808 i2c temperature sensor (#676)
+
+- **enhancements**
+    - **encoders**
+        - add atsamd21, atsamd51, atsame5x
+    - **pixel**
+        - add support for Monochrome types such as the SSD1306 display
+    - **rtl8720dn**
+        - implement ConnectModeAP
+    - **servo**
+        - add function SetAngle() to simplify API for most common use case
+    - **ssd1306**
+        - add DrawBitmap() function to complete Displayer interface
+        - add rotation functions for Displayer interface
+        - add Sleep() function for Displayer interface
+    - **uc8151**
+        - improvements to speed and also add flicker-free mode based on @antirez code example
+        - update to support all functions needed by tinygl and board package Displayer interface
+    - **wifinina**
+        - implement ConnectModeAP
+
+- **bugfixes**
+    - **ft6336**
+        - ignore bogus touch events
+    - **pixel**
+        - fix Image[Monochrome].Set for larger images
+    - **uc8151**
+        - correct DrawBitmap() also refactor SendCommand() and SendData() for clarity
+    - **ws2812**
+        - Fix typo and move initialization of neo to init()
+
+- **examples**
+    - **ws2812**
+        - Simplify examples/ws2812
+
+
+0.27.0
+---
+- **core**
+    - prepare for CGo changes in TinyGo
+
+- **new devices**
+    - **adafruit4650**
+        - support for Adafruit 4650 feather OLED
+    - **net**
+        - new networking support based on tinygo net package
+    - **pixel**
+        - add package for efficiently working with raw pixel buffers
+    - **rotary**
+        - Adding driver for rotary encoder support
+    - **seesaw**
+        - Adding support for Adafruit Seesaw platform
+    - **sgp30**
+        - add SGP30 air quality sensor
+    - **sk6812**
+        - added support for SK6812 to WS2812 device (#610)
+
+- **enhancements**
+    - **epd2in13**
+        - add Sleep method like other displays
+        - unify rotation configuration with other displays
+        - use better black/white approximation
+    - **ili9341**
+        - add DrawBitmap method
+    - **lora/lorawan**
+        - LoRa WAN US915 Support
+        - LoRa WAN add setter functions
+        - refactor shared functionality for channels/regions
+    - **mcp2515**
+        - Add more line speeds to mcp2515.go (#626)
+    - **rtl8720dn**
+        - use drivers package version as the driver version
+    - **ssd1306**
+        - improvements needed for Thumby SPI display
+    - **st7735**
+        - make the display generic over RGB565 and RGB444
+    - **st7789**
+        - add DrawBitmap method
+        - make the display generic over RGB565 and RGB444
+    - **wifinina**
+        - add ResetIsHigh cfg switch for MKR 1010 (copied from #561)
+        - maintenence. Also see PR #4085 in the main TinyGo repo
+        - use drivers package version as the driver version
+
+- **bugfixes**
+    - **adxl345**
+        - Use int16 for ADXL345 readings (#656)
+    - **at24cx**
+        - fixed the description of the device struct
+    - **rtl8720dn**
+        - allow connecting to open wifi access points
+        - fix check for bad Wifi connect
+    - **sh1106**
+        - fix I2C interface and add smoketest
+        - fixed the description of the device struct
+    - **wifinina**
+        - add 'unknown failure' reason code for AP connect
+        - fix concurrency issues with multiple sockets
+        - fix wifinina UDP send
+ 
+- **examples**
+    - **ds3231**
+        - fix the description in the example
+    - **lorawan**
+        - add missing functions for simulated interface
+        - modify atcmd and basic demo to support choosing any one of the supported regions at compile time by using ldflags
+    - **net**
+        - all networking examples now using netdev and netlink.
+
+- **build**
+    - **all**
+        - fix broken testrunner
+        - migrated legacy I2C
+        - add natiu package for tests
+    - **smoketest**
+        - add stack-size param for net tests.
+        - allow stack-size flag as it is needed for net examples
+
+
+0.26.0
+---
+- **core**
+    - i2c iface refactor: Resolve #559
+    - fix uses of legacy i2c WriteRegister calls
+    - add correct Tx implementation for mock I2C interfaces
+    - bump golang.org/x/net version
+
+- **new devices**
+    - **bma42x**
+        - add new BMA421/BMA425 driver
+    - **ndir**
+        - add Sandbox Electronics NDIR CO2 sensor driver (#580)
+    - **mpu9150**
+        - implement driver for Mpu9150 (#596)
+    - **sht4x**
+        - implement driver for sht4x (#597)
+    - **pcf8523**
+        - implement driver for pcf8523 (#599)
+
+- **enhancements**
+    - **ssd1306**
+        - improve bus error handling
+
+- **bugfixes**
+    - **st7789**
+        - fix scrolling when rotated by 180°
+    - **st7789**
+        - fix incorrect Rotation configuration
+        - fix SetScrollArea
+    - **ili9341**
+        - fix SetScrollArea
+
+- **build**
+    - use latest tag of tinygo-dev container for running tests
+
+
+0.25.0
+---
+
+- **core**
+    - add Sensor interface and Measurement type
+    - **delay**
+        - add new package for cycle-accurate delays
+
+- **new devices**
+    - **AS560x**
+        - Add support for ams AS560x on-axis magnetic rotary position sensors
+    - **onewire**
+        - first implementation of 1-wire protocol (#505)
+    - **mpu6886**
+        - initial implementation
+    - **ttp229**
+        - initial support for ttp229 (BSF)
+
+- **enhancements**
+    - **gps**
+        - make the date available in addition to the time (#532)
+    - **i2csoft**
+        - use cycle counting for delays
+    - **ili9341**
+        - add EnableTEOutput to be able to sync drawing with VSYNC
+        - add sleep mode
+        - unify rotation support
+    - **st7735**
+        - add DrawRGBBitmap8 method to draw raw RGB565 buffers
+        - add sleep mode
+        - unify rotation support
+    - **st7789**
+        - added DrawRGBBitmap8 (same as ili9341 & st7735)
+        - allow changing the color format using COLMOD
+        - make it possible to configure gamma
+        - support the chip select pin
+        - update saved rotation in SetRotation
+        - add sleep mode
+        - unify rotation support
+    - **sx126x/sx127x**
+        - Reduce spi buffer size, add missing select when using channels
+        - Remove heap alloc in interrupt, add non blocking channel send/receive, and other cleanups
+    - **wifinina**
+        - add generated strings, improved debugging system and messages
+        - add ResetIsHigh to control the behavior of the RESET pin for boards like the Arduino MKR 1010
+        - only add generated strings when using wifidebug tag
+
+- **bugfixes**
+    - **ds3231**
+        - Document incorrect leap year 2100
+        - Fix negative temperature conversion
+    - **ili9341**
+        - fix Size() for mirrored rotation
+    - **st7789**
+        - avoid heap allocations after the driver is created
+    - **net**
+        - Revert "(#501) make IP.String() method return something sensible"
+    - **wifinina**
+        - small timing adjustments in Configure() to better ensure device reset
+
+- **examples**
+    - **sdcard**
+        - remove tinyfs example and replace with link to tinyfs repo in docs
+    - **wifinina**
+        - improve connectToAP() and other needed minor corrections
+
+- **build**
+    - switch to ghcr.io for docker container
+    - run smoke tests in parallel
+    - **Makefile**
+        - add XTENSA=0 flag to skip Xtensa tests
+        - remove AVR=0 flag
+
+- **docs**
+    - remove full list of devices from README, better to keep it on the tinygo.org site
+    - update LICENSE year
+
+
+0.24.0
+---
+- **new devices**
+    - **lora**
+        - created shared RadioEvent
+        - move shared config for sx126x/sx127x to single package
+    - **lorawan**
+        - add initial LoRaWAN stack support
+        - Basic implementation of Lorawan Regional Settings and EU868/AU915 regions
+    - **qmi8658c**
+        - Add support for the QMI8658C sensor (#467)
+    - **sh1106**
+        - add support for SH1106 display driver
+    - **sx127x**
+        - Driver for Semtech sx127x radio modules
+
+- **enhancements**
+    - **bme280**
+        - improve config support
+        - add ReadAltitude() function copied from BMP280 driver
+    - **buzzer**
+        - make all note durations float64
+        - no tone during rest
+    - **dht22**
+        - update DHT22 receive to use runtime/interrupt
+    - **gps**
+        - add support for GLL sentence type, add original sentence to gps errors
+        - improve error handling
+        - improve parsing and add tests to verify
+    - **microbitmatrix**
+        - add link to schema for microbit V2
+        - add smoke test for microbitmatrix with microbit-v2
+        - add support for brightness of led pixels
+        - harmonize v1 and v2 implementation
+        - move Size() to version agnostic part
+    - **mpu6050**
+        - add functions to configure clock, and scaling for accelerometer and gyroscope
+    - **net/http**
+        - add PostForm()
+    - **sx126x**
+        - add Reset() and needed pin
+        - move RadioController into separate file for clarity
+        - pre-define all errors to avoid heap allocations
+        - refactor to RadioController interface to more easily handle non-STM32WL boards and remove duplicated code
+
+    - **vl53l1x**
+        - Add getter for the effective SPAD count
+    - **wifinina**
+        - add support for http server (#480)
+
+- **bugfixes**
+    - **lsm303agr**
+        - fix I2C address auto increment for multi data read
+    - **net**
+        - (#501) make IP.String() method return something sensible
+    - **mpu6050**
+        - return I2C error when configuring fails
+    - **sx126x**
+        - fix in SetBandwidth function
+        - actually set the frequency when calling SetFrequency()
+        - correct RX/TX pin mapping for TheThingsIndustries GNSE board
+
+- **examples**
+    - **LoRaWAN**
+        - example with LoRaWAN AT command set implementation
+        - basic example
+        - update all remaining examples for refactored API
+    - **sx126x**
+        - fix bandwidth,tx power in lora//lora_continuous example
+    - **sx127x**
+        - rx/tx example
+
+- **build**
+    - remove older format build tags
+    - update to actions/checkout@v3
+    - work around for CVE-2022-24765
+
+
 0.23.0
 ---
 - **new devices**

CONTRIBUTING.md

@@ -8,6 +8,9 @@ We would like your help to make this project better, so we appreciate any contri
 
 We'd love to get your feedback on getting started with TinyGo. Run into any difficulty, confusion, or anything else? You are not alone. We want to know about your experience, so we can help the next people. Please open a Github issue with your questions, or you can also get in touch directly with us on our Slack channel at [https://gophers.slack.com/messages/CDJD3SUP6](https://gophers.slack.com/messages/CDJD3SUP6).
 
+### Driver design
+Before porting or writing a driver from scratch please read **[Driver Design for TinyGo](https://tinygo.org/docs/guides/driver-design)**.
+
 ### One of the TinyGo drivers is not working as you expect
 
 Please open a Github issue with your problem, and we will be happy to assist.

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2018-2022 The TinyGo Authors. All rights reserved.
+Copyright (c) 2018-2025 The TinyGo Authors. All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are

Makefile

@@ -7,244 +7,11 @@ FMT_PATHS = ./
 fmt-check:
 	@unformatted=$$(gofmt -l $(FMT_PATHS)); [ -z "$$unformatted" ] && exit 0; echo "Unformatted:"; for fn in $$unformatted; do echo "  $$fn"; done; exit 1
 
+XTENSA ?= 1
 smoke-test:
 	@mkdir -p build
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adt7410/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adxl345/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/amg88xx
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/apds9960/proximity/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/itsybitsy-m0/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/at24cx/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bh1750/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/blinkm/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmi160/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp180/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp280/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bmp388/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/sram/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/time/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/ds3231/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/easystepper/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espconsole/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/esphub/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espstation/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/flash/console/spi
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/flash/console/qspi
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/gc9a01/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/i2c/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/uart/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/hcsr04/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/customchar/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/text/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/hd44780i2c/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/hts221/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hub75/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/basic
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/basic
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/pyportal_boing
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/scroll
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/scroll
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/slideshow
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis3dh/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/lps22hb/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/lsm303agr/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/lsm6ds3/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mag3110/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017-multiple/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp3008/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp2515/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/microbitmatrix/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mma8653/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mpu6050/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=p1am-100 ./examples/p1am/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pico ./examples/pca9685/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setbuffer/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setpixel/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino ./examples/servo
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/shifter/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht3x/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/shtc3/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/i2c_128x32/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/spi_128x64/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1331/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7735/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7789/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/thermistor/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-bluefruit ./examples/tone
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/tm1637/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/fourwire/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/pyportal_touchpaint/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl53l1x/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl6180x/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd4in2/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/ntpclient/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/udpstation/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/tcpclient/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/webclient/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/ws2812
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.bin -target=m5stamp-c3          ./examples/ws2812
-	@md5sum ./build/test.bin
-	tinygo build -size short -o ./build/test.hex -target=feather-nrf52840 ./examples/is31fl3731/main.go
-	@md5sum ./build/test.hex
-ifneq ($(AVR), 0)
-	tinygo build -size short -o ./build/test.hex -target=arduino   ./examples/ws2812
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=digispark ./examples/ws2812
-	@md5sum ./build/test.hex
-endif
-	tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bme280/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/microphone/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/buzzer/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/veml6070/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/simple/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/speed/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/simple/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/speed/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=nucleo-f103rb ./examples/shiftregister/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=hifive1b ./examples/ssd1351/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis2mdl/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/max72xx/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/dht/main.go
-	@md5sum ./build/test.hex
-	# tinygo build -size short -o ./build/test.hex -target=arduino ./examples/keypad4x4/main.go
-	# @md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/alarm/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/clkout/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/time/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/timer/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/ina260/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=nucleo-l432kc ./examples/aht20/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/sdcard/console/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/sdcard/tinyfs/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/webclient/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/webserver/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/mqttsub/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/i2csoft/adt7410/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.elf -target=wioterminal ./examples/axp192/m5stack-core2-blinky/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/xpt2046/main.go
-	@md5sum ./build/test.uf2
-	tinygo build -size short -o ./build/test.elf -target=m5stack-core2 ./examples/ft6336/basic/
-	@md5sum ./build/test.elf
-	tinygo build -size short -o ./build/test.elf -target=m5stack-core2 ./examples/ft6336/touchpaint/
-	@md5sum ./build/test.elf
-	tinygo build -size short -o ./build/test.hex -target=nucleo-wl55jc ./examples/sx126x/lora_rxtx/
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/ssd1289/main.go
-	@md5sum ./build/test.uf2
-	tinygo build -size short -o ./build/test.hex -target=pico ./examples/irremote/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=badger2040 ./examples/uc8151/main.go
-	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/scd4x/main.go
-	@md5sum ./build/test.uf2
-	tinygo build -size short -o ./build/test.uf2 -target=circuitplay-express ./examples/makeybutton/main.go
-	@md5sum ./build/test.uf2
+	@go run ./smoketest.go -xtensa=$(XTENSA) smoketest.sh
+
 
 # rwildcard is a recursive version of $(wildcard) 
 # https://blog.jgc.org/2011/07/gnu-make-recursive-wildcard-function.html
@@ -252,7 +19,7 @@ rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst
 # Recursively find all *_test.go files from cwd & reduce to unique dir names
 HAS_TESTS = $(sort $(dir $(call rwildcard,,*_test.go)))
 # Exclude anything we explicitly don't want to test for whatever reason
-EXCLUDE_TESTS = image
+EXCLUDE_TESTS = image waveshare-epd/epd2in66b
 TESTS = $(filter-out $(addsuffix /%,$(EXCLUDE_TESTS)),$(HAS_TESTS))
 
 unit-test:

README-net.md

@@ -0,0 +1,233 @@
+### Table of Contents
+
+- ["net" Package](#net-package)
+- [Using "net" Package](#using-net-package)
+- [Using "net/http" Package](#using-nethttp-package)
+- [Using "crypto/tls" Package](#using-cryptotls-package)
+- [Using Sockets](#using-sockets)
+
+## "net" Package
+
+TinyGo's "net" package is ported from Go.  The port offers a subset of Go's
+"net" package.  The subset maintains Go 1 compatiblity guarantee.  A Go
+application that uses "net" will most-likey just work on TinyGo if the usage is
+within the subset offered.  (There may be external constraints such as limited
+SRAM on some targets that may limit full "net" functionality).
+
+Continue below for details on using "net" and "net/http" packages.
+
+See src/net/READMD.md in the TinyGo repo for more details on maintaining
+TinyGo's "net" package.
+
+## Using "net" Package
+
+Ideally, TinyGo's "net" package would be Go's "net" package and applications
+using "net" would just work, as-is.  TinyGo's net package is a partial port of
+Go's net package, so some things may not work because they have not been
+ported.
+
+There are a few features excluded during the porting process, in particular:
+
+- No IPv6 support
+- No DualStack support
+
+Run ```go doc -all ./src/net``` in TinyGo repo to see full listing of what has
+been ported.  Here is a list of things known to work.  You can find examples
+of these at [examples/net](examples/net/).
+
+### What is Known to Work
+
+(These are all IPv4 only).
+
+- TCP client and server
+- UDP client
+- TLS client
+- HTTP client and server
+- HTTPS client
+- NTP client (UDP)
+- MQTT client (paho & natiu)
+- WebSocket client and server
+
+Multiple sockets can be opened in a single app.  For example, the app could run
+as an http server listen on port :80 and also use NTP to get the current time
+or send something over MQTT.  There is a practical limit to the number of
+active sockets per app, around 8 or 10, so don't go crazy.
+
+Applications using Go's net package will need a few setup steps to work with
+TinyGo's net package.  The steps are required before using "net".
+
+### Step 1: Probe to Load Network Driver
+
+Call Probe() to load the correct network driver for your target.  Probe()
+allows the app to work on multiple targets.
+
+```go
+package main
+
+import (
+	"tinygo.org/x/drivers/netlink/probe"
+)
+
+func main() {
+
+	// load network driver for target
+	link, dev := probe.Probe()
+
+	...	
+}
+```
+
+Probe() will load the driver with default configuration for the target.  For
+custom configuration, the app can open code Probe() for the target
+requirements.
+
+Probe() returns a [Netlinker](netlink/README.md) and a
+[Netdever](netdev/README.md), interfaces implemented by the network driver.
+Next, we'll use the Netlinker interface to connect the target to an IP network.
+
+### Step 2: Connect to an IP Network
+
+Before the net package is fully functional, we need to connect the target to an
+IP network.
+
+```go
+package main
+
+import (
+	"tinygo.org/x/drivers/netlink"
+	"tinygo.org/x/drivers/netlink/probe"
+)
+
+func main() {
+
+	// load network driver for target
+	link, _ := probe.Probe()
+
+	// Connect target to IP network
+	link.NetConnect(&netlink.ConnectParams{
+		Ssid:       "my SSID",
+		Passphrase: "my passphrase",
+	})
+
+	// OK to use "net" from here on
+	...	
+}
+```
+
+Optionally, get notified of IP network connects and disconnects:
+
+```go
+	link.Notify(func(e netlink.Event) {
+		switch e {
+		case netlink.EventNetUp:   println("Network UP")
+		case netlink.EventNetDown: println("Network DOWN")
+	})
+```
+
+Here is an example of an http server listening on port :8080:
+
+```go
+package main
+
+import (
+	"fmt"
+	"net/http"
+
+	"tinygo.org/x/drivers/netlink"
+	"tinygo.org/x/drivers/netlink/probe"
+)
+
+func HelloServer(w http.ResponseWriter, r *http.Request) {
+	fmt.Fprintf(w, "Hello, %s!", r.URL.Path[1:])
+}
+
+func main() {
+
+	// load network driver for target
+	link, _ := probe.Probe()
+
+	// Connect target to IP network
+	link.NetConnect(&netlink.ConnectParams{
+		Ssid:       "my SSID",
+		Passphrase: "my passphrase",
+	})
+
+	// Serve it up
+	http.HandleFunc("/", HelloServer)
+	http.ListenAndServe(":8080", nil)
+}
+```
+
+## Using "net/http" Package
+
+TinyGo's net/http package is a partial port of Go's net/http package, providing
+a subset of the full net/http package.  There are a few features excluded
+during the porting process, in particular:
+
+- No HTTP/2 support
+- No TLS support for HTTP servers (no https servers)
+- HTTP client request can't be reused
+
+HTTP client methods (http.Get, http.Head, http.Post, and http.PostForm) are
+functional.  Dial clients support both HTTP and HTTPS URLs.
+
+HTTP server methods and objects are mostly ported, but for HTTP only; HTTPS
+servers are not supported.
+
+HTTP request and response handling code is mostly ported, so most the intricacy
+of parsing and writing headers is handled as in the full net/http package.
+
+Run ```go doc -all ./src/net/http``` in TinyGo repo to see full listing.
+
+## Using "crypto/tls" Package
+
+TinyGo's TLS support (crypto/tls) relies on hardware offload of the TLS
+protocol.  This is different from Go's crypto/tls package which handles the TLS
+protocol in software.
+
+TinyGo's TLS support is only available for client applications.  You can
+http.Get() to an https:// address, but you cannot http.ListenAndServeTLS() an
+https server.
+
+The offloading hardware has pre-defined TLS certificates built-in.
+
+## Using Sockets
+
+The Netdever interface is a BSD socket-like interface so an application can make direct
+socket calls, bypassing the "net" package for the lowest overhead.
+
+Here is a simple TCP client application using direct sockets:
+
+```go
+package main
+
+import (
+	"net"  // only need to parse IP address
+
+	"tinygo.org/x/drivers/netdev"
+	"tinygo.org/x/drivers/netlink"
+	"tinygo.org/x/drivers/netlink/probe"
+)
+
+func main() {
+
+	// load network driver for target
+	link, dev := probe.Probe()
+
+	// Connect target to IP network
+	link.NetConnect(&netlink.ConnectParams{
+		Ssid:       "my SSID",
+		Passphrase: "my passphrase",
+	})
+
+	// omit error handling
+
+	sock, _ := dev.Socket(netdev.AF_INET, netdev.SOCK_STREAM, netdev.IPPROTO_TCP)
+
+        dev.Connect(sock, "", net.ParseIP("10.0.0.100"), 8080)
+	dev.Send(sock, []bytes("hello"), 0, 0)
+
+	dev.Close(sock)
+	link.NetDisconnect()
+}
+```

README.md

@@ -3,7 +3,10 @@
 [![PkgGoDev](https://pkg.go.dev/badge/tinygo.org/x/drivers)](https://pkg.go.dev/tinygo.org/x/drivers) [![Build](https://github.com/tinygo-org/drivers/actions/workflows/build.yml/badge.svg?branch=dev)](https://github.com/tinygo-org/drivers/actions/workflows/build.yml)
 
 
-This package provides a collection of hardware drivers for devices such as sensors and displays that can be used together with [TinyGo](https://tinygo.org).
+This package provides a collection of over 100 different hardware drivers for devices such as sensors, displays, wireless adaptors, and actuators, that can be used together with [TinyGo](https://tinygo.org).
+
+For the complete list, please see:
+https://tinygo.org/docs/reference/devices/
 
 ## Installing
 
@@ -13,7 +16,7 @@ go get tinygo.org/x/drivers
 
 ## How to use
 
-Here is an example in TinyGo that uses the BMP180 digital barometer:
+Here is an example in TinyGo that uses the BMP180 digital barometer.  This example should work on any board that supports I2C:
 
 ```go
 package main
@@ -50,101 +53,27 @@ func main() {
 }
 ```
 
-## Currently supported devices
+## Examples Using GPIO or SPI 
 
-The following 83 devices are supported.
+If compiling these examples directly you are likely to need to make minor changes to the defined variables to map the pins for the board you are using.  For example, this block in main.go:
 
-| Device Name                                                                                                                                                                                         | Interface Type |
-|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------|
-| [ADT7410 I2C Temperature Sensor](https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf)                                                                                   | I2C |
-| [ADXL345 accelerometer](http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf)                                                                                             | I2C |
-| [AHT20 I2C Temperature and Humidity Sensor](http://www.aosong.com/userfiles/files/media/AHT20%20%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%B4%E6%98%8E%E4%B9%A6%20A0%2020201222.pdf)                         | I2C |
-| [AMG88xx 8x8 Thermal camera sensor](https://cdn-learn.adafruit.com/assets/assets/000/043/261/original/Grid-EYE_SPECIFICATIONS%28Reference%29.pdf)                                                   | I2C |
-| [APA102 RGB LED](https://cdn-shop.adafruit.com/product-files/2343/APA102C.pdf)                                                                                                                      | SPI |
-| [APDS9960 Digital proximity, ambient light, RGB and gesture sensor](https://cdn.sparkfun.com/assets/learn_tutorials/3/2/1/Avago-APDS-9960-datasheet.pdf)                                            | I2C |
-| [AT24CX 2-wire serial EEPROM](https://www.openimpulse.com/blog/wp-content/uploads/wpsc/downloadables/24C32-Datasheet.pdf)                                                                           | I2C |
-| [AXP192 single Cell Li-Battery and Power System Management](https://github.com/m5stack/M5-Schematic/blob/master/Core/AXP192%20Datasheet_v1.1_en_draft_2211.pdf)                                     | I2C |
-| [BBC micro:bit LED matrix](https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf)                                                                                          | GPIO |
-| [BH1750 ambient light sensor](https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf)                                                                                                               | I2C |
-| [BlinkM RGB LED](http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf)                                                                                                                 | I2C |
-| [BME280 humidity/pressure sensor](https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf)                                                                                                 | I2C |
-| [BMI160 accelerometer/gyroscope](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi160-ds000.pdf)                                                                    | SPI |
-| [BMP180 barometer](https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf)                                                                                                                | I2C |
-| [BMP280 temperature/barometer](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf)                                                                      | I2C |
-| [BMP388 pressure sensor](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf)                                                                            | I2C |
-| [Buzzer](https://en.wikipedia.org/wiki/Buzzer#Piezoelectric)                                                                                                                                        | GPIO |
-| [DHTXX thermometer and humidity sensor](https://cdn-shop.adafruit.com/datasheets/Digital+humidity+and+temperature+sensor+AM2302.pdf)                                                                | GPIO |
-| [DS1307 real time clock](https://datasheets.maximintegrated.com/en/ds/DS1307.pdf)                                                                                                                   | I2C |
-| [DS3231 real time clock](https://datasheets.maximintegrated.com/en/ds/DS3231.pdf)                                                                                                                   | I2C |
-| [ESP32 as WiFi Coprocessor with Arduino nina-fw](https://github.com/arduino/nina-fw)                                                                                                                | SPI |
-| [ESP8266/ESP32 AT Command set for WiFi/TCP/UDP](https://github.com/espressif/esp32-at)                                                                                                              | UART |
-| [FT6336 touch controller](https://focuslcds.com/content/FT6236.pdf)                                                                                                                                 | I2C |
-| [GPS module](https://www.u-blox.com/en/product/neo-6-series)                                                                                                                                        | I2C/UART |
-| [HC-SR04 Ultrasonic distance sensor](https://cdn.sparkfun.com/datasheets/Sensors/Proximity/HCSR04.pdf)                                                                                              | GPIO |
-| [HD44780 LCD controller](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf)                                                                                                                       | GPIO/I2C |
-| [HTS221 digital humidity and temperature sensor](https://www.st.com/resource/en/datasheet/hts221.pdf)                                                                                               | I2C |
-| [HUB75 RGB led matrix](https://cdn-learn.adafruit.com/downloads/pdf/32x16-32x32-rgb-led-matrix.pdf)                                                                                                 | SPI |
-| [software I2C driver](https://www.ti.com/lit/an/slva704/slva704.pdf)                                                                                                                                | GPIO |
-| [ILI9341 TFT color display](https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf)                                                                                                                   | SPI |
-| [INA260 Volt/Amp/Power meter](https://www.ti.com/lit/ds/symlink/ina260.pdf)                                                                                                                         | I2C |
-| [Infrared remote control](https://en.wikipedia.org/wiki/Consumer_IR)                                                                                                                                | GPIO |
-| [IS31FL3731 matrix LED driver](https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf)                                                                                                          | I2C |
-| [4x4 Membrane Keypad](https://cdn.sparkfun.com/assets/f/f/a/5/0/DS-16038.pdf)                                                                                                                       | GPIO |
-| [L293x motor driver](https://www.ti.com/lit/ds/symlink/l293d.pdf)                                                                                                                                   | GPIO/PWM |
-| [L9110x motor driver](https://www.elecrow.com/download/datasheet-l9110.pdf)                                                                                                                         | GPIO/PWM |
-| [LIS2MDL magnetometer](https://www.st.com/resource/en/datasheet/lis2mdl.pdf)                                                                                                                        | I2C |
-| [LIS3DH accelerometer](https://www.st.com/resource/en/datasheet/lis3dh.pdf)                                                                                                                         | I2C |
-| [LPS22HB MEMS nano pressure sensor](https://www.st.com/resource/en/datasheet/dm00140895.pdf)                                                                                                        | I2C |
-| [LSM6DS3 accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3.pdf)                                                                                                                       | I2C |
-| [LSM6DSOX accelerometer](https://www.st.com/resource/en/datasheet/lsm6dsox.pdf)                                                                                                                     | I2C |
-| [LSM6DS3TR accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3tr.pdf)                                                                                                                   | I2C |
-| [LSM303AGR accelerometer](https://www.st.com/resource/en/datasheet/lsm303agr.pdf)                                                                                                                   | I2C |
-| [LSM9DS1 accelerometer](https://www.st.com/resource/en/datasheet/lsm9ds1.pdf)                                                                                                                       | I2C |
-| [Makey Button](https://makeymakey.com/)                                                                                                                                                             | GPIO |
-| [MAG3110 magnetometer](https://www.nxp.com/docs/en/data-sheet/MAG3110.pdf)                                                                                                                          | I2C |
-| [MAX7219 & MAX7221 display driver](https://datasheets.maximintegrated.com/en/ds/MAX7219-MAX7221.pdf)                                                                                                | SPI |
-| [MCP2515 Stand-Alone CAN Controller with SPI Interface](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Family-Data-Sheet-DS20001801K.pdf)                                                 | SPI |
-| [MCP3008 analog to digital converter (ADC)](http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf)                                                                                             | SPI |
-| [MCP23017 port expander](https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf)                                                                                                            | I2C |
-| [Microphone - PDM](https://cdn-learn.adafruit.com/assets/assets/000/049/977/original/MP34DT01-M.pdf)                                                                                                | I2S/PDM |
-| [MMA8653 accelerometer](https://www.nxp.com/docs/en/data-sheet/MMA8653FC.pdf)                                                                                                                       | I2C |
-| [MPU6050 accelerometer/gyroscope](https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf)                                                                                 | I2C |
-| [P1AM-100 Base Controller](https://facts-engineering.github.io/modules/P1AM-100/P1AM-100.html)                                                                                                      | SPI |
-| [PCD8544 display](http://eia.udg.edu/~forest/PCD8544_1.pdf)                                                                                                                                         | SPI |
-| [PCF8563 real time clock](https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf)                                                                                                                       | I2C |
-| [Resistive Touchscreen (4-wire)](http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf)                                                                                                        | GPIO |
-| [RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0](https://www.seeedstudio.com/Realtek8720DN-2-4G-5G-Dual-Bands-Wireless-and-BLE5-0-Combo-Module-p-4442.html)                                       | UART |
-| [SCD4x CO2 Sensor](https://sensirion.com/media/documents/C4B87CE6/627C2DCD/CD_DS_SCD40_SCD41_Datasheet_D1.pdf)                                                                                      | I2C |
-| [Semihosting](https://wiki.segger.com/Semihosting)                                                                                                                                                  | Debug |
-| [Servo](https://learn.sparkfun.com/tutorials/hobby-servo-tutorial/all)                                                                                                                              | PWM |
-| [Shift register (PISO)](https://en.wikipedia.org/wiki/Shift_register#Parallel-in_serial-out_\(PISO\))                                                                                               | GPIO |
-| [Shift registers (SIPO)](https://en.wikipedia.org/wiki/Shift_register#Serial-in_parallel-out_(SIPO))                                                                                                | GPIO |
-| [SHT3x Digital Humidity Sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf) | I2C |
-| [SHTC3 Digital Humidity Sensor (RH/T)](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf)  | I2C |
-| [SPI NOR Flash Memory](https://en.wikipedia.org/wiki/Flash_memory#NOR_flash)                                                                                                                        | SPI/QSPI |
-| [SPI SDCARD/MMC](https://en.wikipedia.org/wiki/SD_card)                                                                                                                                             | SPI |
-| [SSD1306 OLED display](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf)                                                                                                                        | I2C / SPI |
-| [SSD1331 TFT color display](https://www.crystalfontz.com/controllers/SolomonSystech/SSD1331/381/)                                                                                                   | SPI |
-| [SSD1351 OLED display](https://download.mikroe.com/documents/datasheets/ssd1351-revision-1.3.pdf)                                                                                                   | SPI |
-| [ST7735 TFT color display](https://www.crystalfontz.com/controllers/Sitronix/ST7735R/319/)                                                                                                          | SPI |
-| [ST7789 TFT color display](https://cdn-shop.adafruit.com/product-files/3787/3787_tft_QT154H2201__________20190228182902.pdf)                                                                        | SPI |
-| [Stepper motor "Easystepper" controller](https://en.wikipedia.org/wiki/Stepper_motor)                                                                                                               | GPIO |
-| [Thermistor](https://www.farnell.com/datasheets/33552.pdf)                                                                                                                                          | ADC |
-| [TM1637 7-segment LED display](https://www.mcielectronics.cl/website_MCI/static/documents/Datasheet_TM1637.pdf)                                                                                     | I2C |
-| [TMP102 I2C Temperature Sensor](https://download.mikroe.com/documents/datasheets/tmp102-data-sheet.pdf)                                                                                             | I2C |
-| [UC8151 All-in-one driver IC for ESL](https://www.buydisplay.com/download/ic/UC8151C.pdf)                                                                                                           | I2C |
-| [VEML6070 UV light sensor](https://www.vishay.com/docs/84277/veml6070.pdf)                                                                                                                          | I2C |
-| [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf)                                                                                                      | I2C |
-| [VL6180X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl6180x.pdf)                                                                                                      | I2C |
-| [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf)                                                                             | SPI |
-| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf)                                                                                           | SPI |
-| [Waveshare 2.9" e-paper display (V1)](https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf)                                                                                        | SPI |
-| [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf)                                                                                     | SPI |
-| [Waveshare GC9A01 TFT round display](https://www.waveshare.com/w/upload/5/5e/GC9A01A.pdf)                                                                             | SPI |
-| [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf)                                                                                                                               | GPIO |
-| [XPT2046 touch controller](http://grobotronics.com/images/datasheets/xpt2046-datasheet.pdf)                                                                                                         | GPIO |
-| [Semtech SX126x Lora](https://www.semtech.com/products/wireless-rf/lora-transceiv-ers/sx1261)                                                                                                       | SPI |
-| [SSD1289 TFT color display](http://aitendo3.sakura.ne.jp/aitendo_data/product_img/lcd/tft2/M032C1289TP/3.2-SSD1289.pdf)                                                                             | GPIO |
+```golang
+var (
+        spi   = machine.SPI0
+        csPin = machine.D5
+)
+```
+
+It might not be obvious, but you need to change these to match how you wired your specific board.  Constants are [defined for each supported microcontroller](https://tinygo.org/docs/reference/microcontrollers/).  
+
+For example, to change the definitions for use on a Raspberry Pi Pico using typical wiring, you might need to do this:
+
+```golang
+var (
+        spi   = machine.SPI0
+        csPin = machine.GP17
+)
+```
 
 ## Contributing
 

adafruit4650/device.go

@@ -0,0 +1,196 @@
+// Package adafruit4650 implements a driver for the Adafruit FeatherWing OLED - 128x64 OLED display.
+// The display is backed itself by a SH1107 driver chip.
+//
+// Store: https://www.adafruit.com/product/4650
+//
+// Documentation: https://learn.adafruit.com/adafruit-128x64-oled-featherwing
+package adafruit4650
+
+import (
+	"image/color"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+const DefaultAddress = 0x3c
+
+const (
+	commandSetLowColumn  = 0x00
+	commandSetHighColumn = 0x10
+	commandSetPage       = 0xb0
+)
+
+const (
+	width  = 128
+	height = 64
+)
+
+// Device represents an Adafruit 4650 device
+type Device struct {
+	bus     drivers.I2C
+	Address uint8
+	buffer  []byte
+	width   int16
+	height  int16
+}
+
+// New creates a new device, not configuring anything yet.
+func New(bus drivers.I2C) Device {
+	return Device{
+		bus:     bus,
+		Address: DefaultAddress,
+		width:   width,
+		height:  height,
+	}
+}
+
+// Configure initializes the display with default configuration
+func (d *Device) Configure() error {
+
+	bufferSize := d.width * d.height / 8
+	d.buffer = make([]byte, bufferSize)
+
+	// This sequence is an amalgamation of the datasheet, official Arduino driver, CircuitPython driver and other drivers
+	initSequence := []byte{
+		0xae, // display off, sleep mode
+		//0xd5, 0x41, // set display clock divider (from original datasheet)
+		0xd5, 0x51, // set display clock divider (from Adafruit driver)
+		0xd9, 0x22, // pre-charge/dis-charge period mode: 2 DCLKs/2 DCLKs (POR)
+		0x20,       // memory mode
+		0x81, 0x4f, // contrast setting = 0x4f
+		0xad, 0x8a, // set dc/dc pump
+		0xa0,       // segment remap, flip-x
+		0xc0,       // common output scan direction
+		0xdc, 0x00, // set display start line 0 (POR=0)
+		0xa8, 0x3f, // multiplex ratio, height - 1 = 0x3f
+		0xd3, 0x60, // set display offset mode = 0x60
+		0xdb, 0x35, // VCOM deselect level = 0.770 (POR)
+		0xa4, // entire display off, retain RAM, normal status (POR)
+		0xa6, // normal (not reversed) display
+		0xaf, // display on
+	}
+
+	err := d.writeCommands(initSequence)
+	if err != nil {
+		return err
+	}
+
+	// recommended in the datasheet, same in other drivers
+	time.Sleep(100 * time.Millisecond)
+
+	return nil
+}
+
+// ClearDisplay clears the image buffer as well as the actual display
+func (d *Device) ClearDisplay() error {
+	d.ClearBuffer()
+	return d.Display()
+}
+
+// ClearBuffer clears the buffer
+func (d *Device) ClearBuffer() {
+	bzero(d.buffer)
+}
+
+// SetPixel modifies the internal buffer. Since this display has a bit-depth of 1 bit any non-zero
+// color component will be treated as 'on',  otherwise 'off'.
+func (d *Device) SetPixel(x int16, y int16, c color.RGBA) {
+	if x < 0 || x >= d.width || y < 0 || y >= d.height {
+		return
+	}
+
+	// RAM layout
+	//    *-----> y
+	//    |
+	//   x|     col0  col1  ... col63
+	//    v  p0  a0    b0         ..
+	//           a1    b1         ..
+	//           ..    ..         ..
+	//           a7    b7         ..
+	//       p1  a0    b0
+	//           a1    b1
+	//
+
+	//flip y - so the display orientation matches the silk screen labeling etc.
+	y = d.height - y - 1
+
+	page := x / 8
+	bytesPerPage := d.height
+	byteIndex := y + bytesPerPage*page
+	bit := x % 8
+	if (c.R | c.G | c.B) != 0 {
+		d.buffer[byteIndex] |= 1 << uint8(bit)
+	} else {
+		d.buffer[byteIndex] &^= 1 << uint8(bit)
+	}
+}
+
+// Display sends the whole buffer to the screen
+func (d *Device) Display() error {
+
+	bytesPerPage := d.height
+
+	pages := (d.width + 7) / 8
+	for page := int16(0); page < pages; page++ {
+
+		err := d.setRAMPosition(uint8(page), 0)
+		if err != nil {
+			return err
+		}
+
+		offset := page * bytesPerPage
+		err = d.writeRAM(d.buffer[offset : offset+bytesPerPage])
+		if err != nil {
+			return err
+		}
+	}
+
+	return nil
+}
+
+// setRAMPosition updates the device's current page and column position
+func (d *Device) setRAMPosition(page uint8, column uint8) error {
+	if page > 15 {
+		panic("page out of bounds")
+	}
+	if column > 127 {
+		panic("column out of bounds")
+	}
+	setPage := commandSetPage | (page & 0xF)
+
+	lo := column & 0xF
+	setLowColumn := commandSetLowColumn | lo
+
+	hi := (column >> 4) & 0x7
+	setHighColumn := commandSetHighColumn | hi
+
+	cmds := []byte{
+		setPage,
+		setLowColumn,
+		setHighColumn,
+	}
+
+	return d.writeCommands(cmds)
+}
+
+// Size returns the current size of the display.
+func (d *Device) Size() (w, h int16) {
+	return d.width, d.height
+}
+
+func (d *Device) writeCommands(commands []byte) error {
+	onlyCommandsFollowing := byte(0x00)
+	return d.bus.Tx(uint16(d.Address), append([]byte{onlyCommandsFollowing}, commands...), nil)
+}
+
+func (d *Device) writeRAM(data []byte) error {
+	onlyRAMFollowing := byte(0x40)
+	return d.bus.Tx(uint16(d.Address), append([]byte{onlyRAMFollowing}, data...), nil)
+}
+
+func bzero(buf []byte) {
+	for i := range buf {
+		buf[i] = 0
+	}
+}

adafruit4650/device_test.go

@@ -0,0 +1,176 @@
+package adafruit4650
+
+import (
+	"bytes"
+	_ "embed"
+	"encoding/hex"
+	"fmt"
+	"image"
+	"image/color"
+	"image/draw"
+	"image/png"
+	"os"
+	"testing"
+	"time"
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/freemono"
+)
+
+//go:embed expected_hello_world.png
+var expectedHelloWorld []byte
+
+// mockBus mocks a fake i2c device adafruit4650 display.
+// The memory layout assumes that clients set up the device in a particular way and always send complete
+// pages to the device buffer.
+type mockBus struct {
+	img           draw.Image
+	line          int
+	addr          uint8
+	currentPage   int
+	currentColumn int
+}
+
+func (m *mockBus) Tx(addr uint16, w, r []byte) error {
+	if addr != uint16(m.addr) {
+		panic("unexpected address")
+	}
+	if r != nil {
+		panic("mock does not support reads")
+	}
+
+	if w[0] == 0x00 {
+		if w[1]&0xf0 == 0xb0 {
+			m.currentPage = int(w[1] & 0x0f)
+
+			lo := w[2] & 0x0f
+			hi := w[2] & 0x07
+			m.currentColumn = int(hi<<4 | lo)
+		}
+		return nil
+	}
+	if w[0] != 0x40 {
+		panic("unexpected first byte: " + hex.EncodeToString(w[0:1]))
+	}
+
+	return m.writeRAM(w[1:])
+}
+
+func newMock() *mockBus {
+
+	m := image.NewRGBA(image.Rect(0, 0, width, height))
+	return &mockBus{img: m, addr: DefaultAddress, currentPage: -1, currentColumn: -1}
+}
+
+func (m *mockBus) writeRAM(data []byte) error {
+
+	// RAM layout
+	//    *-----> y
+	//    |
+	//   x|     col0  col1  ... col63
+	//    v  p0  a0    b0         ..
+	//           a1    b1         ..
+	//           ..    ..         ..
+	//           a7    b7         ..
+	//       p1  a0    b0
+	//           a1    b1
+	//
+
+	fmt.Printf("writing page %d\n", m.currentPage)
+	// assuming entire pages will be written
+	for x := 0; x < 8; x++ {
+		for y := 0; y < height; y++ {
+
+			col := data[y]
+
+			c := color.Black
+			if col&(1<<x) != 0 {
+				c = color.White
+			}
+
+			m.img.Set(x+m.currentPage*8, height-y-1, c)
+		}
+	}
+
+	return nil
+}
+
+func (m *mockBus) toImage() *image.RGBA {
+
+	container := image.NewRGBA(m.img.Bounds().Inset(-1))
+	draw.Draw(container, container.Bounds(), image.NewUniform(color.RGBA{G: 255, A: 255}), image.Point{}, draw.Over)
+	draw.Draw(container, m.img.Bounds(), m.img, image.Point{}, draw.Over)
+	return container
+}
+
+func TestDevice_Display(t *testing.T) {
+
+	bus := newMock()
+	dev := New(bus)
+
+	dev.Configure()
+
+	drawPlus(&dev)
+	drawHellowWorld(&dev)
+
+	//when
+	dev.Display()
+
+	//then
+	actual := bus.toImage()
+
+	expected, err := png.Decode(bytes.NewReader(expectedHelloWorld))
+	if err != nil {
+		panic(err)
+	}
+
+	assertEqualImages(t, actual, expected)
+}
+
+func drawPlus(d drivers.Displayer) {
+	for i := int16(0); i < 128; i++ {
+		d.SetPixel(i, 32, color.RGBA{R: 1})
+	}
+	for i := int16(0); i < 64; i++ {
+		d.SetPixel(64, i, color.RGBA{R: 1})
+	}
+}
+
+func drawHellowWorld(d drivers.Displayer) {
+	tinyfont.WriteLine(d, &freemono.Regular9pt7b, 0, 32, "Hello World!", color.RGBA{R: 0xff, G: 0xff, B: 0xff, A: 0xff})
+}
+
+func assertEqualImages(t testing.TB, actual, expected image.Image) {
+
+	if actual.Bounds().Dx() != expected.Bounds().Dx() || actual.Bounds().Dy() != expected.Bounds().Dy() {
+		f := writeImage(actual)
+		t.Fatalf("differing size: was %v, expected %v, saved actual to %s", actual.Bounds(), expected.Bounds(), f)
+	}
+
+	bb := expected.Bounds()
+	for x := bb.Min.X; x < bb.Max.X; x++ {
+		for y := bb.Min.Y; y < bb.Max.Y; y++ {
+			actualBB := actual.Bounds()
+			if actual.At(x+actualBB.Min.X, y+actualBB.Min.Y) != expected.At(x, y) {
+				f := writeImage(actual)
+				t.Fatalf("different pixel at %d/%d: %v != %v, saved actual at %s", x, y, actual.At(x, y), expected.At(x, y), f)
+			}
+		}
+	}
+}
+
+func writeImage(img image.Image) string {
+
+	fn := fmt.Sprintf("%d.png", time.Now().Unix())
+	f, err := os.OpenFile(fn, os.O_RDWR|os.O_CREATE, 0644)
+	if err != nil {
+		panic(err)
+	}
+	defer f.Close()
+
+	err = png.Encode(f, img)
+	if err != nil {
+		panic(err)
+	}
+	return fn
+}

adt7410/adt7410.go

@@ -7,6 +7,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 type Error uint8
@@ -54,7 +55,7 @@ func (d *Device) Configure() (err error) {
 // Connected returns whether sensor has been found.
 func (d *Device) Connected() bool {
 	data := []byte{0}
-	d.bus.ReadRegister(uint8(d.Address), RegID, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), RegID, data)
 	return data[0]&0xF8 == 0xC8
 }
 
@@ -81,11 +82,11 @@ func (d *Device) writeByte(reg uint8, data byte) {
 }
 
 func (d *Device) readByte(reg uint8) byte {
-	d.bus.ReadRegister(d.Address, reg, d.buf)
+	legacy.ReadRegister(d.bus, d.Address, reg, d.buf)
 	return d.buf[0]
 }
 
 func (d *Device) readUint16(reg uint8) uint16 {
-	d.bus.ReadRegister(d.Address, reg, d.buf)
+	legacy.ReadRegister(d.bus, d.Address, reg, d.buf)
 	return uint16(d.buf[0])<<8 | uint16(d.buf[1])
 }

adxl345/adxl345.go

@@ -5,7 +5,10 @@
 // Datasheet JP: http://www.analog.com/media/jp/technical-documentation/data-sheets/ADXL345_jp.pdf
 package adxl345 // import "tinygo.org/x/drivers/adxl345"
 
-import "tinygo.org/x/drivers"
+import (
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
 
 type Range uint8
 type Rate uint8
@@ -68,21 +71,21 @@ func New(bus drivers.I2C) Device {
 
 // Configure sets up the device for communication
 func (d *Device) Configure() {
-	d.bus.WriteRegister(uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
-	d.bus.WriteRegister(uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
-	d.bus.WriteRegister(uint8(d.Address), REG_DATA_FORMAT, []byte{d.dataFormat.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_DATA_FORMAT, []byte{d.dataFormat.toByte()})
 }
 
 // Halt stops the sensor, values will not updated
 func (d *Device) Halt() {
 	d.powerCtl.measure = 0
-	d.bus.WriteRegister(uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
 }
 
 // Restart makes reading the sensor working again after a halt
 func (d *Device) Restart() {
 	d.powerCtl.measure = 1
-	d.bus.WriteRegister(uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_POWER_CTL, []byte{d.powerCtl.toByte()})
 }
 
 // ReadAcceleration reads the current acceleration from the device and returns
@@ -92,18 +95,18 @@ func (d *Device) Restart() {
 func (d *Device) ReadAcceleration() (x int32, y int32, z int32, err error) {
 	rx, ry, rz := d.ReadRawAcceleration()
 
-	x = d.dataFormat.convertToIS(rx)
-	y = d.dataFormat.convertToIS(ry)
-	z = d.dataFormat.convertToIS(rz)
+	x = int32(d.dataFormat.convertToIS(rx))
+	y = int32(d.dataFormat.convertToIS(ry))
+	z = int32(d.dataFormat.convertToIS(rz))
 
 	return
 }
 
 // ReadRawAcceleration reads the sensor values and returns the raw x, y and z axis
 // from the adxl345.
-func (d *Device) ReadRawAcceleration() (x int32, y int32, z int32) {
+func (d *Device) ReadRawAcceleration() (x int16, y int16, z int16) {
 	data := []byte{0, 0, 0, 0, 0, 0}
-	d.bus.ReadRegister(uint8(d.Address), REG_DATAX0, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), REG_DATAX0, data)
 
 	x = readIntLE(data[0], data[1])
 	y = readIntLE(data[2], data[3])
@@ -119,25 +122,25 @@ func (d *Device) UseLowPower(power bool) {
 	} else {
 		d.bwRate.lowPower = 0
 	}
-	d.bus.WriteRegister(uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
 }
 
 // SetRate change the current rate of the sensor
 func (d *Device) SetRate(rate Rate) bool {
 	d.bwRate.rate = rate & 0x0F
-	d.bus.WriteRegister(uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_BW_RATE, []byte{d.bwRate.toByte()})
 	return true
 }
 
 // SetRange change the current range of the sensor
 func (d *Device) SetRange(sensorRange Range) bool {
 	d.dataFormat.sensorRange = sensorRange & 0x03
-	d.bus.WriteRegister(uint8(d.Address), REG_DATA_FORMAT, []byte{d.dataFormat.toByte()})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_DATA_FORMAT, []byte{d.dataFormat.toByte()})
 	return true
 }
 
 // convertToIS adjusts the raw values from the adxl345 with the range configuration
-func (d *dataFormat) convertToIS(rawValue int32) int32 {
+func (d *dataFormat) convertToIS(rawValue int16) int16 {
 	switch d.sensorRange {
 	case RANGE_2G:
 		return rawValue * 4 // rawValue * 2 * 1000 / 512
@@ -187,6 +190,6 @@ func (b *bwRate) toByte() (bits uint8) {
 }
 
 // readInt converts two bytes to int16
-func readIntLE(msb byte, lsb byte) int32 {
-	return int32(uint16(msb) | uint16(lsb)<<8)
+func readIntLE(msb byte, lsb byte) int16 {
+	return int16(uint16(msb) | uint16(lsb)<<8)
 }

aht20/aht20.go

@@ -29,7 +29,7 @@ func New(bus drivers.I2C) Device {
 func (d *Device) Configure() {
 	// Check initialization state
 	status := d.Status()
-	if status&0x08 == 1 {
+	if status&STATUS_CALIBRATED == 1 {
 		// Device is initialized
 		return
 	}
@@ -69,7 +69,7 @@ func (d *Device) Read() error {
 		}
 
 		// If measurement complete, store values
-		if data[0]&0x04 != 0 && data[0]&0x80 == 0 {
+		if data[0]&STATUS_CALIBRATED != 0 && data[0]&STATUS_BUSY == 0 {
 			d.humidity = uint32(data[1])<<12 | uint32(data[2])<<4 | uint32(data[3])>>4
 			d.temp = (uint32(data[3])&0xF)<<16 | uint32(data[4])<<8 | uint32(data[5])
 			return nil

amg88xx/amg88xx.go

@@ -8,6 +8,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // Device wraps an I2C connection to a AMG88xx device.
@@ -48,7 +49,7 @@ func (d *Device) Configure(cfg Config) {
 
 // ReadPixels returns the 64 values (8x8 grid) of the sensor converted to  millicelsius
 func (d *Device) ReadPixels(buffer *[64]int16) {
-	d.bus.ReadRegister(uint8(d.Address), PIXEL_OFFSET, d.data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), PIXEL_OFFSET, d.data)
 	for i := 0; i < 64; i++ {
 		buffer[i] = int16((uint16(d.data[2*i+1]) << 8) | uint16(d.data[2*i]))
 		if (buffer[i] & (1 << 11)) > 0 { // temperature negative
@@ -61,17 +62,17 @@ func (d *Device) ReadPixels(buffer *[64]int16) {
 
 // SetPCTL sets the PCTL
 func (d *Device) SetPCTL(pctl uint8) {
-	d.bus.WriteRegister(uint8(d.Address), PCTL, []byte{pctl})
+	legacy.WriteRegister(d.bus, uint8(d.Address), PCTL, []byte{pctl})
 }
 
 // SetReset sets the reset value
 func (d *Device) SetReset(rst uint8) {
-	d.bus.WriteRegister(uint8(d.Address), RST, []byte{rst})
+	legacy.WriteRegister(d.bus, uint8(d.Address), RST, []byte{rst})
 }
 
 // SetFrameRate configures the frame rate
 func (d *Device) SetFrameRate(framerate uint8) {
-	d.bus.WriteRegister(uint8(d.Address), FPSC, []byte{framerate & 0x01})
+	legacy.WriteRegister(d.bus, uint8(d.Address), FPSC, []byte{framerate & 0x01})
 }
 
 // SetMovingAverageMode sets the moving average mode
@@ -80,7 +81,7 @@ func (d *Device) SetMovingAverageMode(mode bool) {
 	if mode {
 		value = 1
 	}
-	d.bus.WriteRegister(uint8(d.Address), AVE, []byte{value << 5})
+	legacy.WriteRegister(d.bus, uint8(d.Address), AVE, []byte{value << 5})
 }
 
 // SetInterruptLevels sets the interrupt levels
@@ -97,8 +98,8 @@ func (d *Device) SetInterruptLevelsHysteresis(high int16, low int16, hysteresis
 	if high > 4095 {
 		high = 4095
 	}
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(high & 0xFF)})
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((high & 0xFF) >> 4)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8(high & 0xFF)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8((high & 0xFF) >> 4)})
 
 	low = low / PIXEL_TEMP_CONVERSION
 	if low < -4095 {
@@ -107,8 +108,8 @@ func (d *Device) SetInterruptLevelsHysteresis(high int16, low int16, hysteresis
 	if low > 4095 {
 		low = 4095
 	}
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(low & 0xFF)})
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((low & 0xFF) >> 4)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8(low & 0xFF)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8((low & 0xFF) >> 4)})
 
 	hysteresis = hysteresis / PIXEL_TEMP_CONVERSION
 	if hysteresis < -4095 {
@@ -117,32 +118,32 @@ func (d *Device) SetInterruptLevelsHysteresis(high int16, low int16, hysteresis
 	if hysteresis > 4095 {
 		hysteresis = 4095
 	}
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(hysteresis & 0xFF)})
-	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((hysteresis & 0xFF) >> 4)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8(hysteresis & 0xFF)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTHL, []byte{uint8((hysteresis & 0xFF) >> 4)})
 }
 
 // EnableInterrupt enables the interrupt pin on the device
 func (d *Device) EnableInterrupt() {
 	d.interruptEnable = 1
-	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
 }
 
 // DisableInterrupt disables the interrupt pin on the device
 func (d *Device) DisableInterrupt() {
 	d.interruptEnable = 0
-	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
 }
 
 // SetInterruptMode sets the interrupt mode
 func (d *Device) SetInterruptMode(mode InterruptMode) {
 	d.interruptMode = mode
-	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+	legacy.WriteRegister(d.bus, uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
 }
 
 // GetInterrupt reads the state of the triggered interrupts
 func (d *Device) GetInterrupt() []uint8 {
 	data := make([]uint8, 8)
-	d.bus.ReadRegister(uint8(d.Address), INT_OFFSET, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), INT_OFFSET, data)
 	return data
 }
 
@@ -154,6 +155,6 @@ func (d *Device) ClearInterrupt() {
 // ReadThermistor reads the onboard thermistor
 func (d *Device) ReadThermistor() int16 {
 	data := make([]uint8, 2)
-	d.bus.ReadRegister(uint8(d.Address), TTHL, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), TTHL, data)
 	return (int16((uint16(data[1])<<8)|uint16(data[0])) * THERMISTOR_CONVERSION) / 10
 }

apds9960/apds9960.go

@@ -8,6 +8,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // Device wraps an I2C connection to a APDS-9960 device.
@@ -68,7 +69,7 @@ func New(bus drivers.I2C) Device {
 // It does a "who am I" request and checks the response.
 func (d *Device) Connected() bool {
 	data := []byte{0}
-	d.bus.ReadRegister(d.Address, APDS9960_ID_REG, data)
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_ID_REG, data)
 	return data[0] == 0xAB
 }
 
@@ -80,7 +81,7 @@ func (d *Device) GetMode() uint8 {
 // DisableAll turns off the device and all functions
 func (d *Device) DisableAll() {
 	d.enable(enableConfig{})
-	d.bus.WriteRegister(d.Address, APDS9960_GCONF4_REG, []byte{0x00})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_GCONF4_REG, []byte{0x00})
 	d.mode = MODE_NONE
 	d.gesture.detected = GESTURE_NONE
 }
@@ -88,13 +89,13 @@ func (d *Device) DisableAll() {
 // SetProximityPulse sets proximity pulse length (4, 8, 16, 32) and count (1~64)
 // default: 16, 64
 func (d *Device) SetProximityPulse(length, count uint8) {
-	d.bus.WriteRegister(d.Address, APDS9960_PPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_PPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
 }
 
 // SetGesturePulse sets gesture pulse length (4, 8, 16, 32) and count (1~64)
 // default: 16, 64
 func (d *Device) SetGesturePulse(length, count uint8) {
-	d.bus.WriteRegister(d.Address, APDS9960_GPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_GPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
 }
 
 // SetADCIntegrationCycles sets ALS/color ADC internal integration cycles (1~256, 1 cycle = 2.78 ms)
@@ -103,14 +104,14 @@ func (d *Device) SetADCIntegrationCycles(cycles uint16) {
 	if cycles > 256 {
 		cycles = 256
 	}
-	d.bus.WriteRegister(d.Address, APDS9960_ATIME_REG, []byte{uint8(256 - cycles)})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_ATIME_REG, []byte{uint8(256 - cycles)})
 }
 
 // SetGains sets proximity/gesture gain (1, 2, 4, 8x) and ALS/color gain (1, 4, 16, 64x)
 // default: 1, 1, 4
 func (d *Device) SetGains(proximityGain, gestureGain, colorGain uint8) {
-	d.bus.WriteRegister(d.Address, APDS9960_CONTROL_REG, []byte{getProximityGain(proximityGain)<<2 | getALSGain(colorGain)})
-	d.bus.WriteRegister(d.Address, APDS9960_GCONF2_REG, []byte{getProximityGain(gestureGain) << 5})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_CONTROL_REG, []byte{getProximityGain(proximityGain)<<2 | getALSGain(colorGain)})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_GCONF2_REG, []byte{getProximityGain(gestureGain) << 5})
 }
 
 // LEDBoost sets proximity and gesture LED current level (100, 150, 200, 300 (%))
@@ -127,7 +128,7 @@ func (d *Device) LEDBoost(percent uint16) {
 	case 300:
 		v = 3
 	}
-	d.bus.WriteRegister(d.Address, APDS9960_CONFIG2_REG, []byte{0x01 | v<<4})
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_CONFIG2_REG, []byte{0x01 | v<<4})
 }
 
 // Setthreshold sets threshold (0~255) for detecting gestures
@@ -168,7 +169,7 @@ func (d *Device) ReadProximity() (proximity int32) {
 		return 0
 	}
 	data := []byte{0}
-	d.bus.ReadRegister(d.Address, APDS9960_PDATA_REG, data)
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_PDATA_REG, data)
 	return 255 - int32(data[0])
 }
 
@@ -195,14 +196,14 @@ func (d *Device) ReadColor() (r int32, g int32, b int32, clear int32) {
 		return
 	}
 	data := []byte{0, 0, 0, 0, 0, 0, 0, 0}
-	d.bus.ReadRegister(d.Address, APDS9960_CDATAL_REG, data[:1])
-	d.bus.ReadRegister(d.Address, APDS9960_CDATAH_REG, data[1:2])
-	d.bus.ReadRegister(d.Address, APDS9960_RDATAL_REG, data[2:3])
-	d.bus.ReadRegister(d.Address, APDS9960_RDATAH_REG, data[3:4])
-	d.bus.ReadRegister(d.Address, APDS9960_GDATAL_REG, data[4:5])
-	d.bus.ReadRegister(d.Address, APDS9960_GDATAH_REG, data[5:6])
-	d.bus.ReadRegister(d.Address, APDS9960_BDATAL_REG, data[6:7])
-	d.bus.ReadRegister(d.Address, APDS9960_BDATAH_REG, data[7:])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_CDATAL_REG, data[:1])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_CDATAH_REG, data[1:2])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_RDATAL_REG, data[2:3])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_RDATAH_REG, data[3:4])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_GDATAL_REG, data[4:5])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_GDATAH_REG, data[5:6])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_BDATAL_REG, data[6:7])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_BDATAH_REG, data[7:])
 	clear = int32(uint16(data[1])<<8 | uint16(data[0]))
 	r = int32(uint16(data[3])<<8 | uint16(data[2]))
 	g = int32(uint16(data[5])<<8 | uint16(data[4]))
@@ -234,13 +235,13 @@ func (d *Device) GestureAvailable() bool {
 	data := []byte{0, 0, 0, 0}
 
 	// check GVALID
-	d.bus.ReadRegister(d.Address, APDS9960_GSTATUS_REG, data[:1])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_GSTATUS_REG, data[:1])
 	if data[0]&0x01 == 0 {
 		return false
 	}
 
 	// get number of data sets available in FIFO
-	d.bus.ReadRegister(d.Address, APDS9960_GFLVL_REG, data[:1])
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_GFLVL_REG, data[:1])
 	availableDataSets := data[0]
 	if availableDataSets == 0 {
 		return false
@@ -249,10 +250,10 @@ func (d *Device) GestureAvailable() bool {
 	// read up, down, left and right proximity data from FIFO
 	var dataSets [32][4]uint8
 	for i := uint8(0); i < availableDataSets; i++ {
-		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_U_REG, data[:1])
-		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_D_REG, data[1:2])
-		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_L_REG, data[2:3])
-		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_R_REG, data[3:4])
+		legacy.ReadRegister(d.bus, d.Address, APDS9960_GFIFO_U_REG, data[:1])
+		legacy.ReadRegister(d.bus, d.Address, APDS9960_GFIFO_D_REG, data[1:2])
+		legacy.ReadRegister(d.bus, d.Address, APDS9960_GFIFO_L_REG, data[2:3])
+		legacy.ReadRegister(d.bus, d.Address, APDS9960_GFIFO_R_REG, data[3:4])
 		for j := uint8(0); j < 4; j++ {
 			dataSets[i][j] = data[j]
 		}
@@ -385,7 +386,7 @@ func (d *Device) enable(cfg enableConfig) {
 	}
 
 	data := []byte{gen<<6 | pien<<5 | aien<<4 | wen<<3 | pen<<2 | aen<<1 | pon}
-	d.bus.WriteRegister(d.Address, APDS9960_ENABLE_REG, data)
+	legacy.WriteRegister(d.bus, d.Address, APDS9960_ENABLE_REG, data)
 
 	if cfg.PON {
 		time.Sleep(time.Millisecond * 10)
@@ -394,7 +395,7 @@ func (d *Device) enable(cfg enableConfig) {
 
 func (d *Device) readStatus(param string) bool {
 	data := []byte{0}
-	d.bus.ReadRegister(d.Address, APDS9960_STATUS_REG, data)
+	legacy.ReadRegister(d.bus, d.Address, APDS9960_STATUS_REG, data)
 
 	switch param {
 	case "CPSAT":

apds9960/apds9960_generic.go

@@ -1,10 +1,7 @@
 //go:build !nano_33_ble
-// +build !nano_33_ble
 
 package apds9960
 
-import "tinygo.org/x/drivers"
-
 // Configure sets up the APDS-9960 device.
 func (d *Device) Configure(cfg Configuration) {
 	// configure device

apds9960/apds9960_nano_33_ble.go

@@ -1,5 +1,4 @@
 //go:build nano_33_ble
-// +build nano_33_ble
 
 package apds9960
 

as560x/as5600.go

@@ -0,0 +1,172 @@
+//	Product: https://ams.com/as5600
+//	Datasheet: https://ams.com/documents/20143/36005/AS5600_DS000365_5-00.pdf
+
+package as560x // import tinygo.org/x/drivers/ams560x
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+// AS5600 includes MPOS & MANG in addition to ZPOS to set a 'narrower angle range'
+// ZPOS enables setting the 'zero position' of the device to any RAW_ANGLE value.
+// MPOS ('max position') & MANG 'max angle' enable a 'partial range' on the AS5600.
+// The value in ANGLE is scaled & adjusted by the device according to ZPOS and MPOS/MANG.
+// The entire 12-bit range is 'compressed' into the RAW_ANGLE range of ZPOS->MPOS
+// (or ZPOS->ZPOS+MANG) thus enabling a higher resolution for a partial range.
+// if ZPOS > MPOS (or ZPOS + MANG > 4095) i.e. the incremental range 'crosses zero'
+// then the device will automatically compensate for the correct range.
+// For RAW_ANGLE values outside of the partial range, ANGLE will be 'capped' at either
+// 0 or 4095, depending on 'which end of the partial range is closer.'
+
+// AS5600Device represents an ams AS5600 device driver accessed over I2C
+type AS5600Device struct {
+	// promote BaseDevice
+	BaseDevice
+}
+
+// NewAS5600 creates a new AS5600Device given an I2C bus
+func NewAS5600(bus drivers.I2C) AS5600Device {
+	// Create base device
+	baseDev := newBaseDevice(bus)
+	// Add AS5600 specific registers
+	baseDev.registers[MPOS] = newI2CRegister(MPOS, 0, 0xfff, 2, reg_read|reg_write|reg_program)
+	baseDev.registers[MANG] = newI2CRegister(MANG, 0, 0xfff, 2, reg_read|reg_write|reg_program)
+	// Add AS5600 specific 'virtual registers'
+	conf, ok := baseDev.registers[CONF]
+	if ok {
+		baseDev.registers[PWMF] = newVirtualRegister(conf, 6, 0b11)
+		baseDev.registers[OUTS] = newVirtualRegister(conf, 4, 0b11)
+	}
+	// Return the device
+	return AS5600Device{baseDev}
+}
+
+// Configure sets up the AMS AS5600 sensor device with the given configuration.
+func (d *AS5600Device) Configure(cfg Config) error {
+	// Call the BaseDevice method to do the actual Configure
+	d.BaseDevice.Configure(cfg)
+	// For AS5600 devices we need to calculate the maxAngle on startup from ZPOS/MPOS/MANG
+	// These could have been permanently BURN'ed (by writing BURN register with BURN_ANGLE/BURN_SETTING)
+	// or may have already been written in previous runs without a power cycle since.
+	mpos, err := d.ReadRegister(MPOS)
+	if nil != err {
+		return err
+	}
+	mang, err := d.ReadRegister(MANG)
+	if nil != err {
+		return err
+	}
+	// Read ZPOS for side effect of caching only so that next calculateEffectiveMaxAngle() can't fail
+	if _, err = d.ReadRegister(ZPOS); nil != err {
+		return err
+	}
+	if mpos != 0 {
+		// If MPOS is set, use MPOS regardless of MANG
+		err = d.calculateEffectiveMaxAngle(MPOS, mpos)
+	} else if mang != 0 {
+		// If MANG is set and MPOS == 0, use MANG
+		err = d.calculateEffectiveMaxAngle(MANG, mang)
+	} else {
+		// if neither is set, we have no narrow range
+		d.maxAngle = NATIVE_ANGLE_RANGE
+	}
+	return err
+}
+
+// calculateEffectiveMaxAngle calculates d.maxAngle after one of ZPOS/MPOS/MANG have been written
+func (d *AS5600Device) calculateEffectiveMaxAngle(register uint8, value uint16) error {
+
+	var zpos, mpos uint16 = 0, 0
+	var err error = nil
+
+	switch register {
+	case MANG:
+		d.maxAngle = value // The easy case
+		return nil
+	case ZPOS:
+		zpos = value
+		mpos, err = d.ReadRegister(MPOS)
+	case MPOS:
+		mpos = value
+		zpos, err = d.ReadRegister(ZPOS)
+	default:
+		panic("calculateEffectiveMaxAngle() can only work from ZPOS, MPOS or MANG")
+	}
+
+	if nil != err {
+		return err
+	}
+	// MANG is effectively MPOS-ZPOS
+	mang := int(mpos) - int(zpos)
+	// correct for mpos < zpos
+	if mang < 0 {
+		mang += NATIVE_ANGLE_RANGE
+	}
+	d.maxAngle = uint16(mang)
+	return nil
+}
+
+// WriteRegister writes the given value for the given register to the AS560x device via I2C
+func (d *AS5600Device) WriteRegister(address uint8, value uint16) error {
+	// Call the BaseDevice method to do the actual write
+	if err := d.BaseDevice.WriteRegister(address, value); err != nil {
+		return err
+	}
+	// When either ZPOS/MANG/MPOS are set we need to recalculate maxAngle
+	// We also may need to invalidate some cached values for the other two registers
+	recalc := false
+	switch address {
+	case ZPOS:
+		// Setting a new ZPOS invalidates MPOS but not MANG
+		d.registers[MPOS].invalidate()
+		recalc = true
+	case MPOS:
+		// Setting a new MPOS invalidates MANG but not ZPOS
+		d.registers[MANG].invalidate()
+		recalc = true
+	case MANG:
+		// Setting a new MANG invalidates MPOS but not ZPOS
+		d.registers[MPOS].invalidate()
+		recalc = true
+	}
+	if recalc {
+		// Datasheet tells us to wait at least 1ms before reading back
+		time.Sleep(time.Millisecond * 10) // conservative wait
+		return d.calculateEffectiveMaxAngle(address, value)
+	}
+	return nil
+}
+
+// GetMaxPosition returns the 'max position' (MPOS) in different units
+func (d *AS5600Device) GetMaxPosition(units AngleUnit) (uint16, float32, error) {
+	mpos, err := d.ReadRegister(MPOS)
+	if nil != err {
+		return 0, 0.0, err
+	}
+	// Convert to requested units
+	i, f := convertFromNativeAngle(mpos, NATIVE_ANGLE_RANGE, units)
+	return i, f, nil
+}
+
+// SetMaxPosition sets the 'max position' (MPOS) in different units
+func (d *AS5600Device) SetMaxPosition(mpos float32, units AngleUnit) error {
+	return d.WriteRegister(MPOS, convertToNativeAngle(mpos, units))
+}
+
+// GetMaxAngle returns the 'max position' (MANG) in different units
+func (d *AS5600Device) GetMaxAngle(units AngleUnit) (uint16, float32, error) {
+	mang, err := d.ReadRegister(MANG)
+	if nil != err {
+		return 0, 0.0, err
+	}
+	// Convert to requested units
+	i, f := convertFromNativeAngle(mang, NATIVE_ANGLE_RANGE, units)
+	return i, f, nil
+}
+
+// SetMaxAngle sets the 'max angle' (MANG) in different units
+func (d *AS5600Device) SetMaxAngle(mang float32, units AngleUnit) error {
+	return d.WriteRegister(MANG, convertToNativeAngle(mang, units))
+}

as560x/as5601.go

@@ -0,0 +1,22 @@
+//	Product: https://ams.com/as5601
+//	Datasheet: https://ams.com/documents/20143/36005/AS5601_DS000395_3-00.pdf
+
+package as560x // import tinygo.org/x/drivers/ams560x
+
+import "tinygo.org/x/drivers"
+
+// AS5601Device represents an ams AS5601 device driver accessed over I2C
+type AS5601Device struct {
+	BaseDevice // promote base device
+}
+
+// NewAS5601 creates a new AS5601Device given an I2C bus
+func NewAS5601(bus drivers.I2C) AS5601Device {
+	// Create base device
+	baseDev := newBaseDevice(bus)
+	// Add AS5601 specific registers
+	baseDev.registers[ABN] = newI2CRegister(ABN, 0, 0b1111, 1, reg_read|reg_write|reg_program)
+	baseDev.registers[PUSHTHR] = newI2CRegister(PUSHTHR, 0, 0xff, 1, reg_read|reg_write|reg_program)
+	// Return the device
+	return AS5601Device{baseDev}
+}

as560x/as560x.go

@@ -0,0 +1,198 @@
+// Package as560x implements drivers for the ams AS5600/AS5601 on-axis magnetic rotary position sensors
+//
+// Product Pages:
+//	AS5600: https://ams.com/as5600
+//	AS5601: https://ams.com/as5601
+//
+// Datasheets:
+//	AS5600: https://ams.com/documents/20143/36005/AS5600_DS000365_5-00.pdf
+//	AS5601: https://ams.com/documents/20143/36005/AS5601_DS000395_3-00.pdf
+//
+
+package as560x // import tinygo.org/x/drivers/ams560x
+
+import (
+	"errors"
+
+	"tinygo.org/x/drivers"
+)
+
+// Config holds the configuration for the AMS AS560x sensor devices.
+type Config struct {
+	// Address is the I2C address of the AS560x device. If left zero this will default to 0x36
+	Address uint8
+}
+
+// MagnetStrength is an enum to indicate the magnetic field strength detected by the AS560x sensors.
+type MagnetStrength int
+
+const (
+	// MagnetTooWeak indicates that the magnet strength is too weak (AGC maximum gain overflow) - move it closer
+	MagnetTooWeak MagnetStrength = iota - 1
+	// MagnetOk indicates that the magnet strength is about right.
+	MagnetOk
+	// MagnetTooStrong indicates that the magnet strength is too strong (AGC minimum gain overflow) - move it further away
+	MagnetTooStrong
+)
+
+// AngleUnit is an enum to allow the use of different units when reading/writing angles from the AS560x sensors.
+type AngleUnit int
+
+const (
+	// ANGLE_NATIVE uses the device's native angle measurement. i.e. 12-bit integer, 0 <= angle <= 0xfff (4095)
+	ANGLE_NATIVE AngleUnit = iota
+	// ANGLE_DEGREES_INT measures angles in degrees using integer arithmetic for speed. i.e. 0 <= angle < 360
+	ANGLE_DEGREES_INT
+	// ANGLE_DEGREES_FLOAT measures angles in degrees using floating point (slower). i.e. 0.0 <= angle < 360.0
+	ANGLE_DEGREES_FLOAT
+	// ANGLE_RADIANS measures angles in radians using floating point (slower). i.e. 0.0 <= angle < 2 * PI
+	ANGLE_RADIANS
+)
+
+const (
+	// NATIVE_ANGLE_MAX is the maximum valid value for a native angle for a AS560x device
+	NATIVE_ANGLE_MAX = (1 << 12) - 1 + iota
+	// NATIVE_ANGLE_RANGE is the number of unique values for native angles for a AS560x device
+	NATIVE_ANGLE_RANGE
+)
+
+var (
+	errRegisterNotFound = errors.New("Register not found")
+	errMaxBurnAngle     = errors.New("Max BURN_ANGLE limit reached")
+)
+
+// BaseDevice handles the common behaviour between AS5600 & AS5601 devices
+type BaseDevice struct {
+	bus       drivers.I2C
+	address   uint8
+	registers map[uint8]*i2cRegister
+	maxAngle  uint16
+}
+
+// newBaseDevice creates a new base device given an I2C bus.
+func newBaseDevice(bus drivers.I2C) BaseDevice {
+	// Add all 'base' registers, common to both AS5600 & AS5601
+	conf := newI2CRegister(CONF, 0, 0x3fff, 2, reg_read|reg_write|reg_program)
+	status := newI2CRegister(STATUS, 0, 0xff, 1, reg_read)
+	regs := map[uint8]*i2cRegister{
+		ZPOS:      newI2CRegister(ZPOS, 0, 0xfff, 2, reg_read|reg_write|reg_program),
+		CONF:      conf,
+		RAW_ANGLE: newI2CRegister(RAW_ANGLE, 0, 0xfff, 2, reg_read),
+		ANGLE:     newI2CRegister(ANGLE, 0, 0xfff, 2, reg_read),
+		STATUS:    status,
+		AGC:       newI2CRegister(AGC, 0, 0xff, 1, reg_read),
+		MAGNITUDE: newI2CRegister(MAGNITUDE, 0, 0xfff, 2, reg_read),
+		BURN:      newI2CRegister(BURN, 0, 0xff, 1, reg_write),
+		// Add common 'virtual registers' These are bitfields within the common registers above
+		// A virtual register provides a convenient way to access the fields of a registers
+		// by handling all of the necessary bitfield shifting and masking operations
+		WD:   newVirtualRegister(conf, 13, 0b1),
+		FTH:  newVirtualRegister(conf, 10, 0b111),
+		SF:   newVirtualRegister(conf, 8, 0b11),
+		HYST: newVirtualRegister(conf, 2, 0b11),
+		PM:   newVirtualRegister(conf, 0, 0b11),
+		MD:   newVirtualRegister(status, 5, 0b1),
+		ML:   newVirtualRegister(status, 4, 0b1),
+		MH:   newVirtualRegister(status, 3, 0b1),
+	}
+	return BaseDevice{bus, DefaultAddress, regs, NATIVE_ANGLE_RANGE}
+}
+
+// Configure sets up the AMS AS560x sensor device with the given configuration.
+func (d *BaseDevice) Configure(cfg Config) {
+	if cfg.Address == 0 {
+		cfg.Address = DefaultAddress
+	}
+	d.address = cfg.Address
+}
+
+// ReadRegister reads the value for the given register from the AS560x device via I2C
+func (d *BaseDevice) ReadRegister(address uint8) (uint16, error) {
+	reg, ok := d.registers[address]
+	if !ok {
+		return 0, errRegisterNotFound
+	}
+	return reg.read(d.bus, d.address)
+}
+
+// WriteRegister writes the given value for the given register to the AS560x device via I2C
+func (d *BaseDevice) WriteRegister(address uint8, value uint16) error {
+	reg, ok := d.registers[address]
+	if !ok {
+		return errRegisterNotFound
+	}
+	return reg.write(d.bus, d.address, value)
+}
+
+// GetZeroPosition returns the 'zero position' (ZPOS) in various units
+func (d *BaseDevice) GetZeroPosition(units AngleUnit) (uint16, float32, error) {
+	zpos, err := d.ReadRegister(ZPOS)
+	if nil != err {
+		return 0, 0.0, err
+	}
+	// Convert to requested units
+	i, f := convertFromNativeAngle(zpos, NATIVE_ANGLE_RANGE, units)
+	return i, f, nil
+}
+
+// SetZeroPosition sets the 'zero position' (ZPOS) in various units
+func (d *BaseDevice) SetZeroPosition(zpos float32, units AngleUnit) error {
+	return d.WriteRegister(ZPOS, convertToNativeAngle(zpos, units))
+}
+
+// RawAngle reads the (unscaled & unadjusted) RAW_ANGLE register in various units
+func (d *BaseDevice) RawAngle(units AngleUnit) (uint16, float32, error) {
+	angle, err := d.ReadRegister(RAW_ANGLE)
+	if nil != err {
+		return 0, 0.0, err
+	}
+	// Convert to requested units
+	i, f := convertFromNativeAngle(angle, NATIVE_ANGLE_RANGE, units)
+	return i, f, nil
+}
+
+// Angle reads the (scaled & adjusted) ANGLE register in various units
+func (d *BaseDevice) Angle(units AngleUnit) (uint16, float32, error) {
+	// ZPOS enables setting the 'zero position' of the device to any RAW_ANGLE value
+	// ANGLE is RAW_ANGLE adjusted relative to ZPOS.
+	angle, err := d.ReadRegister(ANGLE)
+	if nil != err {
+		return 0, 0.0, err
+	}
+	// Convert to requested units
+	i, f := convertFromNativeAngle(angle, d.maxAngle, units)
+	return i, f, nil
+}
+
+// MagnetStatus reads the STATUS register and reports magnet position characteristics
+func (d *BaseDevice) MagnetStatus() (detected bool, strength MagnetStrength, err error) {
+	status, err := d.ReadRegister(STATUS)
+	if nil != err {
+		return false, MagnetOk, err
+	}
+	detected = (status & STATUS_MD) != 0
+	strength = MagnetOk
+	if (status & STATUS_ML) != 0 {
+		strength = MagnetTooWeak
+	} else if (status & STATUS_MH) != 0 {
+		strength = MagnetTooStrong
+	}
+	return
+}
+
+// Burn is a convenience method to program the device permanently by writing to the BURN register (limited number of times use!)
+func (d *BaseDevice) Burn(burnCmd BURN_CMD) error {
+	if BURN_ANGLE == burnCmd {
+		// BURN_ANGLE can only be executed up to 3 times.
+		// We can check this in advance by reading ZMCO before writing to the BURN register.
+		numBurns, err := d.ReadRegister(ZMCO)
+		if nil != err {
+			return err
+		}
+		if numBurns >= BURN_ANGLE_COUNT_MAX {
+			// We're outta BURNs :(
+			return errMaxBurnAngle
+		}
+	}
+	return d.WriteRegister(BURN, uint16(burnCmd))
+}

as560x/helpers.go

@@ -0,0 +1,95 @@
+package as560x // import tinygo.org/x/drivers/ams560x
+
+import "math"
+
+// convertFromNativeAngle converts and scales an angle from the device's native 12-bit range to the requested units
+func convertFromNativeAngle(angle uint16, maxAngle uint16, units AngleUnit) (uint16, float32) {
+	// MANG == 0 & MANG == NATIVE_ANGLE_RANGE (1 << 12) mean the same thing: use full circle range
+	// but the latter makes the maths/code simpler
+	if 0 == maxAngle {
+		maxAngle = NATIVE_ANGLE_RANGE
+	}
+	switch units {
+	case ANGLE_NATIVE:
+		// For native angles, scaling has already been done by the device
+		return angle, float32(angle)
+	case ANGLE_DEGREES_INT:
+		// Convert to degrees using integer arithmetic. Less accuracy but faster
+		var deg int = 0
+		if NATIVE_ANGLE_RANGE == maxAngle {
+			// Simplify the conversion when using the full range
+			deg = int(angle) * 360 >> 12
+		} else {
+			// Using an integer degrees scale with a narrower native range is pointless since we don't
+			// benefit at all from the increase in native resolution, in fact we LOSE precision.
+			// Alas, we have to return something
+			// First get maxAngle on the degrees scale
+			degMang, _ := convertFromNativeAngle(maxAngle, NATIVE_ANGLE_RANGE, units)
+			// Now scale angle
+			deg = int(angle) * int(degMang) / NATIVE_ANGLE_RANGE
+		}
+		return uint16(deg), float32(deg)
+	case ANGLE_DEGREES_FLOAT:
+		// Convert to degrees using floating point. More accuracy at expense of speed
+		var degF float32 = 0.0
+		if NATIVE_ANGLE_RANGE == maxAngle {
+			// Simplify the conversion when using the full range
+			degF = float32(angle) * 360.0 / NATIVE_ANGLE_RANGE
+		} else {
+			// Scale to degrees using a narrower native range
+			// First get maxAngle on the degrees scale
+			_, degMangF := convertFromNativeAngle(maxAngle, NATIVE_ANGLE_RANGE, units)
+			// Now scale angle
+			degF = float32(angle) * degMangF / NATIVE_ANGLE_RANGE
+		}
+		return uint16(degF), degF
+	case ANGLE_RADIANS:
+		// Convert to radians. Can only be done using floating point.
+		var rad float32 = 0.0
+		if NATIVE_ANGLE_RANGE == maxAngle {
+			// Simplify the conversion when using the full range
+			rad = float32(angle) * 2 * math.Pi / NATIVE_ANGLE_RANGE
+		} else {
+			// Scale to radians using a narrower native range
+			// First get maxAngle on the radians scale
+			_, radMang := convertFromNativeAngle(maxAngle, NATIVE_ANGLE_RANGE, units)
+			// Now scale angle
+			rad = float32(angle) * radMang / NATIVE_ANGLE_RANGE
+		}
+		return uint16(rad), rad
+	default:
+		panic("Unknown angle measurement unit")
+	}
+}
+
+// convertToNativeAngle converts an angle from the requested units to the device's native 12-bit range.
+func convertToNativeAngle(angle float32, units AngleUnit) uint16 {
+	var pos uint16 = 0
+	switch units {
+	case ANGLE_NATIVE:
+		pos = uint16(angle)
+	case ANGLE_DEGREES_INT:
+		fallthrough
+	case ANGLE_DEGREES_FLOAT:
+		// Convert from degrees
+		angle = float32(math.Mod(float64(angle), 360.0))
+		if angle < 0.0 {
+			angle += 360.0
+		}
+		pos = uint16(math.Round(float64(angle) * NATIVE_ANGLE_RANGE / 360.0))
+	case ANGLE_RADIANS:
+		// Convert from radians
+		const circRad = 2.0 * math.Pi
+		angle = float32(math.Mod(float64(angle), circRad))
+		if angle < 0.0 {
+			angle += circRad
+		}
+		pos = uint16(math.Round(float64(angle) * NATIVE_ANGLE_RANGE / circRad))
+	default:
+		panic("Unknown angle measurement unit")
+	}
+	if pos > NATIVE_ANGLE_MAX {
+		pos = NATIVE_ANGLE_MAX
+	}
+	return pos
+}

as560x/i2c_register.go

@@ -0,0 +1,170 @@
+package as560x // import tinygo.org/x/drivers/ams560x
+
+import (
+	"encoding/binary"
+	"errors"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
+
+// registerAttributes is a bitfield of attributes for a register
+type registerAttributes uint8
+
+const (
+	// reg_read indicates that the register is readable
+	reg_read registerAttributes = 1 << iota
+	// reg_write indicates that the register is writeable
+	reg_write
+	// reg_program indicates that the register can be permanently programmed ('BURNed')
+	reg_program
+)
+
+var (
+	errRegisterNotReadable  = errors.New("Register is not readable")
+	errRegisterNotWriteable = errors.New("Register is not writeable")
+)
+
+// i2cRegister encapsulates the address, structure and read/write logic for a register on a AS560x device
+type i2cRegister struct {
+	// host is the 'host register' for virtual registers. Physical/root registers have this set to self
+	host *i2cRegister
+	// address is the i2c address of the register. For 2-byte (word) addresses it's the low byte which holds the MSBs
+	address uint8
+	// shift is the number of bits the value is 'left shifted' into the register byte/word (0-15)
+	shift uint16
+	// mask is a bitwise mask applied to the register AFTER 'right shifting' to mask the register value
+	mask uint16
+	// num_bytes is the width of the register in bytes, 1 or 2.
+	num_bytes uint8
+	// attributes holds the register attributes. A bitfield of REG_xyz constants
+	attributes registerAttributes
+	// cached indicates whether we are holding a cached value of the register in value
+	cached bool
+	// value can be used as a 'cache' of the register's value for writeable registers.
+	value uint16
+}
+
+// newI2CRegister returns a pointer to a new i2cRegister with no cached value
+func newI2CRegister(address uint8, shift uint16, mask uint16, num_bytes uint8, attributes registerAttributes) *i2cRegister {
+	reg := &i2cRegister{
+		address:    address,
+		shift:      shift,
+		mask:       mask,
+		num_bytes:  num_bytes,
+		attributes: attributes,
+	}
+	// root registers host themselves
+	reg.host = reg
+	return reg
+}
+
+// newVirtualRegister returns a pointer to a new i2cRegister with the given host register and shift/mask.
+func newVirtualRegister(host *i2cRegister, shift uint16, mask uint16) *i2cRegister {
+	return &i2cRegister{
+		host:       host,
+		address:    host.address,
+		shift:      shift,
+		mask:       mask,
+		num_bytes:  host.num_bytes,
+		attributes: host.attributes,
+	}
+}
+
+// invalidate invalidates any cached value for the register and forces an I2C read on the next read()
+func (r *i2cRegister) invalidate() {
+	r.host.cached = false
+	r.host.value = 0
+}
+
+// readShiftAndMask is an internal method to read a value for the register over the given I2C bus from the device with the given address applying the given shift and mask
+func (r *i2cRegister) readShiftAndMask(bus drivers.I2C, deviceAddress uint8, shift uint16, mask uint16) (uint16, error) {
+	if r.host.attributes&reg_read == 0 {
+		return 0, errRegisterNotReadable
+	}
+
+	// Only read over I2C if we don't have the host register value cached
+	var val uint16 = r.host.value
+	if !r.host.cached {
+		// To avoid an alloc we always use an array of 2 bytes
+		var buffer [2]byte
+		var buf []byte
+		if r.host.num_bytes < 2 {
+			buf = buffer[:1]
+		} else {
+			buf = buffer[:]
+		}
+		// Read the host register over I2C
+		err := legacy.ReadRegister(bus, deviceAddress, r.host.address, buf)
+		if nil != err {
+			return 0, err
+		}
+		// Unpack data from I2C
+		if r.host.num_bytes > 1 {
+			val = binary.BigEndian.Uint16(buf)
+		} else {
+			val = uint16(buf[0])
+		}
+		// cache this value if the host register is writeable. Note we cache the entire buffer without applying shift/mask
+		if r.host.attributes&reg_write != 0 {
+			r.host.value = val
+			r.host.cached = true
+		}
+	}
+	// Shift and mask the value before returning
+	val >>= shift
+	val &= mask
+	return val, nil
+}
+
+// read reads a value for the register over the given I2C bus from the device with the given address.
+func (r *i2cRegister) read(bus drivers.I2C, deviceAddress uint8) (uint16, error) {
+	return r.readShiftAndMask(bus, deviceAddress, r.shift, r.mask)
+}
+
+// write writes a value for the register over the given I2C bus to the device with the given address.
+func (r *i2cRegister) write(bus drivers.I2C, deviceAddress uint8, value uint16) error {
+	if r.host.attributes&reg_write == 0 {
+		return errRegisterNotWriteable
+	}
+	var newValue uint16 = 0
+	// Data sheet tells us to do a read first, modify only the desired bits and then write back
+	// since (quote:) 'Blank fields may contain factory settings'
+	// We will also need to do this anyway to support virtualRegister mappings on some registers
+	// (e.g. CONF/STATUS)
+	if (r.host.attributes & reg_read) > 0 { // not all registers are readable, e.g. BURN
+		// read the host register's entire host byte/word, regardless of shift & mask
+		readValue, error := r.readShiftAndMask(bus, deviceAddress, 0, 0xffff)
+		if error != nil {
+			return error
+		}
+		// Zero-out ONLY the relevant bits in newValue we just read
+		readValue &= (0xffff ^ (r.mask << r.shift))
+		newValue = readValue
+	}
+	// Mask the new value and shift it into place
+	value &= r.mask
+	value <<= r.shift
+	// OR the masked & shifted value back into newValue to be written
+	newValue |= value
+	// Pack newValue into a byte buffer to write. To avoid an alloc we always use an array of 2 bytes
+	var buffer [2]byte
+	var buf []byte
+	if r.host.num_bytes < 2 {
+		buf = buffer[:1]
+		buf[0] = uint8(newValue & 0xff)
+	} else {
+		buf = buffer[:]
+		binary.BigEndian.PutUint16(buf, newValue)
+	}
+
+	// Write the register from the buffer over I2C
+	err := legacy.WriteRegister(bus, deviceAddress, r.host.address, buf)
+	// after successful I2C write, cache this value if the host register (if also readable)
+	// Note we cache the entire buffer without applying shift/mask
+	if nil == err && r.host.attributes&reg_read != 0 {
+		r.host.value = newValue
+		r.host.cached = true
+	}
+	return err
+}

as560x/registers.go

@@ -0,0 +1,208 @@
+package as560x // import tinygo.org/x/drivers/ams560x
+
+// DefaultAddress is the default I2C address of the AMS AS560x sensors (0x36).
+const DefaultAddress uint8 = 0x36
+
+// AS560x common device registers
+const (
+	// ZMCO contains the number of times a BURN_ANGLE command has been executed (max 3 burns)
+	ZMCO = 0x00
+	// ZPOS is the zero (start) position in RAW_ANGLE terms.
+	ZPOS = 0x01
+	// CONF supports custom config. Raw 14-bit register. See datasheet for mapping or use 'virtual registers' below.
+	CONF = 0x07
+	// STATUS indicates magnet position. Encapsulates MD, ML & MH. See also 'virtual registers' below.
+	STATUS = 0x0b
+	// RAW_ANGLE is the raw unscaled & unadjusted angle (12 bit: 0-4095/0xfff)
+	RAW_ANGLE = 0x0c
+	// ANGLE is RAW_ANGLE scaled & adjusted according to ZPOS (and MPOS/MANG on AS5600). (12 bit: 0-4095/0xfff)
+	ANGLE = 0x0e
+	// AGC is the Automatic Gain Control based on temp, airgap etc. 0-255 @ 5V, 0-128 @ 3.3V.
+	AGC = 0x1a
+	// MAGNITUDE indicates the magnitude value of the internal CORDIC output. See datasheet for more info.
+	MAGNITUDE = 0x1b
+	// BURN performs permanent programming of some registers. See BURN_XYZ cmd constants below for commands.
+	BURN = 0xff
+)
+
+// AS5600 specific registers
+const (
+	// MPOS is the maximum position in RAW_ANGLE terms. With ZPOS, defines a 'narrower angle' for higher resolution.
+	MPOS = 0x03
+	// MANG is the maximum angle. With ZPOS, defines a 'narrower angle' for higher resolution.
+	MANG = 0x05
+)
+
+// AS5601 specific registers
+const (
+	// ABN. See datasheet for mapping
+	ABN = 0x09
+	// PUSHTHR. Configures push-button function. See datasheet and AGC
+	PUSHTHR = 0x0a
+)
+
+// 'Virtual Registers' (VRs) are bitfields within the registers above.
+// These are not real register addresses recognized by the chip,
+// but they are recognized by the driver for convenience.
+
+// virtualRegisterStartAddress defines the start of the virtual register address range.
+const virtualRegisterStartAddress = 0xa0
+
+const (
+	// VRs for CONF
+
+	// WD is a Virtual Register for the Watchdog timer. See WATCHDOG_TIMER consts.
+	WD = iota + virtualRegisterStartAddress
+	// FTH is a Virtual Register for the Fast Filter Threshold. See FAST_FILTER_THRESHOLD consts.
+	FTH
+	// SF is a Virtual Register for the Slow Filter. See SLOW_FILTER_RESPONSE consts.
+	SF
+	// PWMF is a Virtual Register for PWM Frequency (AS5600 ONLY). See PWM_FREQUENCY consts.
+	PWMF
+	// OUTS is a Virtual Register for the Output Stage (AS5600 ONLY). See OUTPUT_STAGE consts.
+	OUTS
+	// HYST is a Virtual Register for Hysteresis. See HYSTERESIS consts.
+	HYST
+	// PM is a Virtual Register for the Power Mode. See POWER_MODE consts.
+	PM
+
+	// VRs for STATUS (0 = unset, 1 = set)
+
+	// MD is a Virtual Register for the 'Magnet was detected' flag.
+	MD
+	// ML is a Virtual Register for the 'AGC maximum gain overflow' a.k.a 'magnet too weak' flag.
+	ML
+	// MH is a Virtual Register for the 'AGC minimum gain overflow' a.k.a 'magnet too strong' flag.
+	MH
+)
+
+// POWER_MODE values for the PM component of CONF (and the PM VR)
+const (
+	// PM_NOM is the normal 'always on' power mode. No polling, max 6.5mA current
+	PM_NOM = iota
+	// PM_LPM1 is Low Power Mode 1. 5ms polling, max 3.4mA current
+	PM_LPM1
+	// PM_LPM2 is Low Power Mode 2. 20ms polling, max 1.8mA current
+	PM_LPM2
+	// PM_LPM3 is Low Power Mode 3. 100ms polling, max 1.5mA current
+	PM_LPM3
+)
+
+// HYSTERESIS values for the HYST component of CONF (and the HYST VR)
+const (
+	// HYST_OFF disables any hysteresis of the output
+	HYST_OFF = iota
+	// HYST_1LSB enables output hysteresis using 1 LSB
+	HYST_1LSB
+	// HYST_2LSB enables output hysteresis using 2 LSBs
+	HYST_2LSB
+	// HYST_3LSB enables output hysteresis using 3 LSBs
+	HYST_3LSB
+)
+
+// OUTPUT_STAGE values for the OUTS component of CONF (and the OUTS VR - AS5600 ONLY)
+const (
+	// OS_ANALOG_FULL_RANGE enables analog output with full range (0%-100% VDD)
+	OS_ANALOG_FULL_RANGE = iota
+	// OS_ANALOG_REDUCED_RANGE enables analog output with reduced range (10%-90% VDD)
+	OS_ANALOG_REDUCED_RANGE
+	// OS_DIGITAL_PWM enables digital PWM output. Frequency determined by PWMF
+	OS_DIGITAL_PWM
+)
+
+// PWM_FREQUENCY values for the PWMF component of CONF (and the PWMF VR - ASS5600 ONLY)
+const (
+	// PWMF_115_HZ enables PWM at 115 Hz
+	PWMF_115_HZ = iota
+	// PWMF_230_HZ enables PWM at 230 Hz
+	PWMF_230_HZ
+	// PWMF_460_HZ enables PWM at 460 Hz
+	PWMF_460_HZ
+	// PWMF_920_HZ enables PWM at 920 Hz
+	PWMF_920_HZ
+)
+
+// SLOW_FILTER_RESPONSE values for the SF (slow filter) component of CONF (and the SF VR)
+const (
+	// SF_16X enables a 16x Slow Filter step response
+	SF_16X = iota
+	// SF_8X enables a 8x Slow Filter step response
+	SF_8X
+	// SF_4X enables a 4x Slow Filter step response
+	SF_4X
+	// SF_2X enables a 2x Slow Filter step response
+	SF_2X
+)
+
+// FAST_FILTER_THRESHOLD values for the FTH (fast filter threshold) component of CONF (and the FTH VR)
+const (
+	// FTH_NONE disables the fast filter (slow filter only)
+	FTH_NONE = iota
+	// FTH_6LSB enables a fast filter threshold with 6 LSBs
+	FTH_6LSB
+	// FTH_7LSB enables a fast filter threshold with 7 LSBs
+	FTH_7LSB
+	// FTH_9LSB enables a fast filter threshold with 9 LSBs
+	FTH_9LSB
+	// FTH_18LSB enables a fast filter threshold with 18 LSBs
+	FTH_18LSB
+	// FTH_21LSB enables a fast filter threshold with 21 LSBs
+	FTH_21LSB
+	// FTH_24LSB enables a fast filter threshold with 24 LSBs
+	FTH_24SB
+	// FTH_10LSB enables a fast filter threshold with 10 LSBs
+	FTH_10LSB
+)
+
+// WATCHDOG_TIMER values for the WD component of CONF (and the WD VR)
+const (
+	// WD_OFF disables the Watchdog Timer
+	WD_OFF = iota
+	// WD_ON enables the Watchdog Timer (automatic entry into LPM3 low-power mode enabled)
+	WD_ON
+)
+
+// constants for the raw STATUS register bitfield value.
+const (
+	// STATUS_MH is set in STATUS when the magnet field is too strong (AGC minimum gain overflow)
+	STATUS_MH = 1 << (iota + 3)
+	// STATUS_ML is set in STATUS when the magnet field is too weak (AGC maximum gain overflow)
+	STATUS_ML
+	// STATUS_MD is set n STATUS when the magnet is detected. Doesn't seem to work with some units.
+	STATUS_MD
+)
+
+// ABN_MAPPING values for the ABN register (AS5601 ONLY)
+const (
+	// ABN_8 configures 8 output positions (61 Hz)
+	ABN_8 = iota
+	// ABN_16 configures 16 output positions (122 Hz)
+	ABN_16
+	// ABN_32 configures 32 output positions (244 Hz)
+	ABN_32
+	// ABN_64 configures 64 output positions (488 Hz)
+	ABN_64
+	// ABN_128 configures 128 output positions (976 Hz)
+	ABN_128
+	// ABN_256 configures 256 output positions (1.95 KHz)
+	ABN_256
+	// ABN_512 configures 512 output positions (3.9 KHz)
+	ABN_512
+	// ABN_1024 configures 1024 output positions (7.8 KHz)
+	ABN_1024
+	// ABN_2048 configures 2048 output positions (15.6 KHz)
+	ABN_2048
+)
+
+// BURN_CMD is a command to write to the BURN register.
+type BURN_CMD uint16
+
+const (
+	// BURN_ANGLE is the value to write to BURN to permanently program ZPOS & MPOS (Max 3 times!)
+	BURN_ANGLE BURN_CMD = 0x80
+	// BURN_SETTING is the value to write to BURN to permanently program MANG & CONF (ONCE ONLY!)
+	BURN_SETTING BURN_CMD = 0x40
+)
+
+// BURN_ANGLE_COUNT_MAX is a constant for the maximum number of times a BURN_ANGLE command can be executed. Compare this with ZMCO
+const BURN_ANGLE_COUNT_MAX uint16 = 3

at24cx/at24cx.go

@@ -11,7 +11,7 @@ import (
 	"tinygo.org/x/drivers"
 )
 
-// Device wraps an I2C connection to a DS3231 device.
+// Device wraps an I2C connection to an AT24CX device.
 type Device struct {
 	bus               drivers.I2C
 	Address           uint16

axp192/axp192.go

@@ -7,6 +7,7 @@ package axp192 // import "tinygo.org/x/drivers/axp192"
 
 import (
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 type Error uint8
@@ -248,10 +249,10 @@ func (d *Device) SetLDOEnable(number uint8, state bool) {
 }
 
 func (d *Device) write1Byte(reg, data uint8) {
-	d.bus.WriteRegister(d.Address, reg, []byte{data})
+	legacy.WriteRegister(d.bus, d.Address, reg, []byte{data})
 }
 
 func (d *Device) read8bit(reg uint8) uint8 {
-	d.bus.ReadRegister(d.Address, reg, d.buf[:1])
+	legacy.ReadRegister(d.bus, d.Address, reg, d.buf[:1])
 	return d.buf[0]
 }

bma42x/bma42x.go

@@ -0,0 +1,352 @@
+// Package bma42x provides a driver for the BMA421 and BMA425 accelerometer
+// chips.
+//
+// Here is a reasonably good datasheet:
+// https://datasheet.lcsc.com/lcsc/1912111437_Bosch-Sensortec-BMA425_C437656.pdf
+//
+// This driver was originally written for the PineTime, using the datasheet as a
+// guide. There is an open source C driver provided by Bosch, but unfortunately
+// it needs some small modifications to work with other chips (most importantly,
+// the "config file").
+// The InfiniTime and Wasp-OS drivers for this accelerometer have also been used
+// to figure out some driver details (especially step counting).
+package bma42x
+
+import (
+	_ "embed"
+	"errors"
+	"reflect"
+	"time"
+	"unsafe"
+
+	"tinygo.org/x/drivers"
+)
+
+// Driver for BMA421 and BMA425:
+// BMA421: https://files.pine64.org/doc/datasheet/pinetime/BST-BMA421-FL000.pdf
+// BMA425: https://datasheet.lcsc.com/lcsc/1912111437_Bosch-Sensortec-BMA425_C437656.pdf
+
+// This is the BMA421 firmware from the Wasp-OS project.
+// It is identical to the so-called BMA423 firmware in InfiniTime, which I
+// suspect to be actually a BMA421 firmware. I don't know where this firmware
+// comes from or what the licensing status is.
+// It has the FEATURES_IN command prepended, so that it can be written directly
+// using I2C.Tx.
+// Source: https://github.com/wasp-os/bma42x-upy/blob/master/BMA42X-Sensor-API/bma421.h
+//
+//go:embed bma421-config-waspos.bin
+var bma421Firmware string
+
+// Same as the BMA421 firmware, but for the BMA425.
+// Source: https://github.com/wasp-os/bma42x-upy/blob/master/BMA42X-Sensor-API/bma425.h
+//
+//go:embed bma425-config-waspos.bin
+var bma425Firmware string
+
+var (
+	errUnknownDevice     = errors.New("bma42x: unknown device")
+	errUnsupportedDevice = errors.New("bma42x: device not part of config")
+	errConfigMismatch    = errors.New("bma42x: config mismatch")
+	errTimeout           = errors.New("bma42x: timeout")
+	errInitFailed        = errors.New("bma42x: failed to initialize")
+)
+
+const Address = 0x18 // BMA421/BMA425 address
+
+type DeviceType uint8
+
+const (
+	DeviceBMA421 DeviceType = 1 << iota
+	DeviceBMA425
+
+	AnyDevice            = DeviceBMA421 | DeviceBMA425
+	noDevice  DeviceType = 0
+)
+
+// Features to enable while configuring the accelerometer.
+type Features uint8
+
+const (
+	FeatureStepCounting = 1 << iota
+)
+
+type Config struct {
+	// Which devices to support (OR the device types together as needed).
+	Device DeviceType
+
+	// Which features to enable. With Features == 0, only the accelerometer will
+	// be enabled.
+	Features Features
+}
+
+type Device struct {
+	bus               drivers.I2C
+	address           uint8
+	accelData         [6]byte
+	combinedTempSteps [5]uint8 // [0:3] steps, [4] temperature
+	dataBuf           [2]byte
+}
+
+func NewI2C(i2c drivers.I2C, address uint8) *Device {
+	return &Device{
+		bus:     i2c,
+		address: address,
+	}
+}
+
+func (d *Device) Connected() bool {
+	val, err := d.read1(_CHIP_ID)
+	return err == nil && identifyChip(val) != noDevice
+}
+
+func (d *Device) Configure(config Config) error {
+	if config.Device == 0 {
+		config.Device = AnyDevice
+	}
+
+	// Check chip ID, to check the connection and to determine which BMA42x
+	// device we're dealing with.
+	chipID, err := d.read1(_CHIP_ID)
+	if err != nil {
+		return err
+	}
+
+	// Determine which firmware (config file?) we'll be using.
+	// There is an extra check for the device before using the given firmware.
+	// This check will typically be optimized away if the given device is not
+	// configured, so that the firmware (which is 6kB in size!) won't be linked
+	// into the binary.
+	var firmware string
+	switch identifyChip(chipID) {
+	case DeviceBMA421:
+		if config.Device&DeviceBMA421 == 0 {
+			return errUnsupportedDevice
+		}
+		firmware = bma421Firmware
+	case DeviceBMA425:
+		if config.Device&DeviceBMA425 == 0 {
+			return errUnsupportedDevice
+		}
+		firmware = bma425Firmware
+	default:
+		return errUnknownDevice
+	}
+
+	// Reset the chip, to be able to initialize it properly.
+	// The datasheet says a delay is needed after a SoftReset, but it doesn't
+	// say how long this delay should be. The bma423 driver however uses a 200ms
+	// delay, so that's what we'll be using.
+	err = d.write1(_CMD, cmdSoftReset)
+	if err != nil {
+		return err
+	}
+	time.Sleep(200 * time.Millisecond)
+
+	// Disable power saving.
+	err = d.write1(_PWR_CONF, 0x00)
+	if err != nil {
+		return err
+	}
+	time.Sleep(450 * time.Microsecond)
+
+	// Start initialization (because the datasheet says so).
+	err = d.write1(_INIT_CTRL, 0x00)
+	if err != nil {
+		return err
+	}
+
+	// Write "config file" (actually a firmware, I think) to the chip.
+	// To do this, unsafely cast the string to a byte slice to avoid putting it
+	// in RAM. This is safe in this case because Tx won't write to the 'w'
+	// slice.
+	err = d.bus.Tx(uint16(d.address), unsafeStringToSlice(firmware), nil)
+	if err != nil {
+		return err
+	}
+
+	// Read the config data back.
+	// We don't do that, as it slows down configuration and it probably isn't
+	// _really_ necessary with a reasonably stable I2C bus.
+	if false {
+		data := make([]byte, len(firmware)-1)
+		err = d.readn(_FEATURES_IN, data)
+		if err != nil {
+			return err
+		}
+		for i, c := range data {
+			if firmware[i+1] != c {
+				return errConfigMismatch
+			}
+		}
+	}
+
+	// Enable sensors.
+	err = d.write1(_INIT_CTRL, 0x01)
+	if err != nil {
+		return err
+	}
+
+	// Wait until the device is initialized.
+	start := time.Now()
+	status := uint8(0) // busy
+	for status == 0 {
+		status, err = d.read1(_INTERNAL_STATUS)
+		if err != nil {
+			return err // I2C bus error.
+		}
+		if status > 1 {
+			// Expected either 0 ("not_init") or 1 ("init_ok").
+			return errInitFailed
+		}
+		if time.Since(start) >= 150*time.Millisecond {
+			// The datasheet says initialization should not take longer than
+			return errTimeout
+		}
+		// Don't bother the chip all the time while it's initializing.
+		time.Sleep(50 * time.Microsecond)
+	}
+
+	if config.Features&FeatureStepCounting != 0 {
+		// Enable step counter.
+		// TODO: support step counter parameters.
+		var buf [71]byte
+		buf[0] = _FEATURES_IN // prefix buf with the command
+		data := buf[1:]
+		err = d.readn(_FEATURES_IN, data)
+		if err != nil {
+			return err
+		}
+		data[0x3A+1] |= 0x10 // enable step counting by setting a magical bit
+		err = d.bus.Tx(uint16(d.address), buf[:], nil)
+		if err != nil {
+			return err
+		}
+	}
+
+	// Enable the accelerometer.
+	err = d.write1(_PWR_CTRL, 0x04)
+	if err != nil {
+		return err
+	}
+
+	// Configure accelerometer for low power usage:
+	//   acc_perf_mode=0   (power saving enabled)
+	//   acc_bwp=osr4_avg1 (no averaging)
+	//   acc_odr=50Hz      (50Hz sampling interval, enough for the step counter)
+	const accelConf = 0x00<<7 | 0x00<<4 | 0x07<<0
+	err = d.write1(_ACC_CONF, accelConf)
+	if err != nil {
+		return err
+	}
+
+	// Reduce current consumption.
+	// With power saving enabled (and the above ACC_CONF) the chip consumes only
+	// 14µA.
+	err = d.write1(_PWR_CONF, 0x03)
+	if err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (d *Device) Update(which drivers.Measurement) error {
+	// TODO: combine temperature and step counter into a single read.
+	if which&drivers.Temperature != 0 {
+		val, err := d.read1(_TEMPERATURE)
+		if err != nil {
+			return err
+		}
+		d.combinedTempSteps[4] = val
+	}
+	if which&drivers.Acceleration != 0 {
+		// The acceleration data is stored in DATA8 through DATA13 as 3 12-bit
+		// values.
+		err := d.readn(_DATA_8, d.accelData[:]) // ACC_X(LSB)
+		if err != nil {
+			return err
+		}
+		err = d.readn(_STEP_COUNTER_0, d.combinedTempSteps[:4])
+		if err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// Temperature returns the last read temperature in celsius milli degrees (1°C
+// is 1000).
+func (d *Device) Temperature() int32 {
+	// The temperature value is a two's complement number (meaning: signed) in
+	// units of 1 kelvin, with 0 being 23°C.
+	return (int32(int8(d.combinedTempSteps[4])) + 23) * 1000
+}
+
+// Acceleration returns the last read acceleration in µg (micro-gravity).
+// When one of the axes is pointing straight to Earth and the sensor is not
+// moving the returned value will be around 1000000 or -1000000.
+func (d *Device) Acceleration() (x, y, z int32) {
+	// Combine raw data from d.accelData (stored as 12-bit signed values) into a
+	// number (0..4095):
+	x = int32(d.accelData[0])>>4 | int32(d.accelData[1])<<4
+	y = int32(d.accelData[2])>>4 | int32(d.accelData[3])<<4
+	z = int32(d.accelData[4])>>4 | int32(d.accelData[5])<<4
+	// Sign extend this number to -2048..2047:
+	x = (x << 20) >> 20
+	y = (y << 20) >> 20
+	z = (z << 20) >> 20
+	// Scale from -512..511 to -1000_000..998_046.
+	// Or, at the maximum range (4g), from -2048..2047 to -2000_000..3998_046.
+	// The formula derived as follows (where 512 is the expected value at 1g):
+	//   x = x * 1000_000      / 512
+	//   x = x * (1000_000/64) / (512/64)
+	//   x = x * 15625         / 8
+	x = x * 15625 / 8
+	y = y * 15625 / 8
+	z = z * 15625 / 8
+	return
+}
+
+// Steps returns the number of steps counted since the BMA42x sensor was
+// initialized.
+func (d *Device) Steps() (steps uint32) {
+	steps |= uint32(d.combinedTempSteps[0]) << 0
+	steps |= uint32(d.combinedTempSteps[1]) << 8
+	steps |= uint32(d.combinedTempSteps[2]) << 16
+	steps |= uint32(d.combinedTempSteps[3]) << 24
+	return
+}
+
+func (d *Device) read1(register uint8) (uint8, error) {
+	d.dataBuf[0] = register
+	err := d.bus.Tx(uint16(d.address), d.dataBuf[:1], d.dataBuf[1:2])
+	return d.dataBuf[1], err
+}
+
+func (d *Device) readn(register uint8, data []byte) error {
+	d.dataBuf[0] = register
+	return d.bus.Tx(uint16(d.address), d.dataBuf[:1], data)
+}
+
+func (d *Device) write1(register uint8, data uint8) error {
+	d.dataBuf[0] = register
+	d.dataBuf[1] = data
+	return d.bus.Tx(uint16(d.address), d.dataBuf[:2], nil)
+}
+
+func unsafeStringToSlice(s string) []byte {
+	// TODO: use unsafe.Slice(unsafe.StringData(...)) once we require Go 1.20.
+	sh := (*reflect.StringHeader)(unsafe.Pointer(&s))
+	return unsafe.Slice((*byte)(unsafe.Pointer(sh.Data)), len(s))
+}
+
+func identifyChip(chipID uint8) DeviceType {
+	switch chipID {
+	case 0x11:
+		return DeviceBMA421
+	case 0x13:
+		return DeviceBMA425
+	default:
+		return noDevice
+	}
+}

bma42x/registers.go

@@ -0,0 +1,73 @@
+package bma42x
+
+const (
+	// I2C registers
+	_CHIP_ID         = 0x00
+	_ERR_REG         = 0x02
+	_STATUS          = 0x03
+	_DATA_0          = 0x0A
+	_DATA_1          = 0x0B
+	_DATA_2          = 0x0C
+	_DATA_3          = 0x0D
+	_DATA_4          = 0x0E
+	_DATA_5          = 0x0F
+	_DATA_6          = 0x10
+	_DATA_7          = 0x11
+	_DATA_8          = 0x12
+	_DATA_9          = 0x13
+	_DATA_10         = 0x14
+	_DATA_11         = 0x15
+	_DATA_12         = 0x16
+	_DATA_13         = 0x17
+	_SENSORTIME_0    = 0x18
+	_SENSORTIME_1    = 0x19
+	_SENSORTIME_2    = 0x1A
+	_EVENT           = 0x1B
+	_INT_STATUS_0    = 0x1C
+	_INT_STATUS_1    = 0x1D
+	_STEP_COUNTER_0  = 0x1E
+	_STEP_COUNTER_1  = 0x1F
+	_STEP_COUNTER_2  = 0x20
+	_STEP_COUNTER_3  = 0x21
+	_TEMPERATURE     = 0x22
+	_FIFO_LENGTH_0   = 0x24
+	_FIFO_LENGTH_1   = 0x25
+	_FIFO_DATA       = 0x26
+	_ACTIVITY_TYPE   = 0x27
+	_INTERNAL_STATUS = 0x2A
+	_ACC_CONF        = 0x40
+	_ACC_RANGE       = 0x41
+	_AUX_CONF        = 0x44
+	_FIFO_DOWNS      = 0x45
+	_FIFO_WTM_0      = 0x46
+	_FIFO_WTM_1      = 0x47
+	_FIFO_CONFIG_0   = 0x48
+	_FIFO_CONFIG_1   = 0x49
+	_AUX_DEV_ID      = 0x4B
+	_AUX_IF_CONF     = 0x4C
+	_AUX_RD_ADDR     = 0x4D
+	_AUX_WR_ADDR     = 0x4E
+	_AUX_WR_DATA     = 0x4F
+	_INT1_IO_CTRL    = 0x53
+	_INT2_IO_CTRL    = 0x54
+	_INT_LATCH       = 0x55
+	_INT1_MAP        = 0x56
+	_INT2_MAP        = 0x57
+	_INT_MAP_DATA    = 0x58
+	_INIT_CTRL       = 0x59
+	_FEATURES_IN     = 0x5E
+	_INTERNAL_ERROR  = 0x5F
+	_NVM_CONF        = 0x6A
+	_IF_CONF         = 0x6B
+	_ACC_SELF_TEST   = 0x6D
+	_NV_CONF         = 0x70
+	_OFFSET_0        = 0x71
+	_OFFSET_1        = 0x72
+	_OFFSET_2        = 0x73
+	_PWR_CONF        = 0x7C
+	_PWR_CTRL        = 0x7D
+	_CMD             = 0x7E
+
+	// Commands send to regCommand.
+	cmdSoftReset = 0xB6
+)

bme280/bme280.go

@@ -7,8 +7,10 @@ package bme280
 
 import (
 	"math"
+	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // calibrationCoefficients reads at startup and stores the calibration coefficients
@@ -33,11 +35,27 @@ type calibrationCoefficients struct {
 	h6 int8
 }
 
+type Oversampling byte
+type Mode byte
+type FilterCoefficient byte
+type Period byte
+
+// Config contains settings for filtering, sampling, and modes of operation
+type Config struct {
+	Pressure    Oversampling
+	Temperature Oversampling
+	Humidity    Oversampling
+	Period      Period
+	Mode        Mode
+	IIR         FilterCoefficient
+}
+
 // Device wraps an I2C connection to a BME280 device.
 type Device struct {
 	bus                     drivers.I2C
 	Address                 uint16
 	calibrationCoefficients calibrationCoefficients
+	Config                  Config
 }
 
 // New creates a new BME280 connection. The I2C bus must already be
@@ -51,24 +69,49 @@ func New(bus drivers.I2C) Device {
 	}
 }
 
-// Configure sets up the device for communication and
-// read the calibration coefficientes.
+// ConfigureWithSettings sets up the device for communication and
+// read the calibration coefficients.
+//
+// The default configuration is the Indoor Navigation settings
+// from the BME280 datasheet.
 func (d *Device) Configure() {
+	d.ConfigureWithSettings(Config{})
+}
+
+// ConfigureWithSettings sets up the device for communication and
+// read the calibration coefficients.
+//
+// The default configuration if config is left at defaults is
+// the Indoor Navigation settings from the BME280 datasheet.
+func (d *Device) ConfigureWithSettings(config Config) {
+	d.Config = config
+
+	// If config is not initialized, use Indoor Navigation defaults.
+	if d.Config == (Config{}) {
+		d.Config = Config{
+			Mode:        ModeNormal,
+			Period:      Period0_5ms,
+			Temperature: Sampling2X,
+			Humidity:    Sampling1X,
+			Pressure:    Sampling16X,
+			IIR:         Coeff16,
+		}
+	}
 
 	var data [24]byte
-	err := d.bus.ReadRegister(uint8(d.Address), REG_CALIBRATION, data[:])
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_CALIBRATION, data[:])
 	if err != nil {
 		return
 	}
 
 	var h1 [1]byte
-	err = d.bus.ReadRegister(uint8(d.Address), REG_CALIBRATION_H1, h1[:])
+	err = legacy.ReadRegister(d.bus, uint8(d.Address), REG_CALIBRATION_H1, h1[:])
 	if err != nil {
 		return
 	}
 
 	var h2lsb [7]byte
-	err = d.bus.ReadRegister(uint8(d.Address), REG_CALIBRATION_H2LSB, h2lsb[:])
+	err = legacy.ReadRegister(d.bus, uint8(d.Address), REG_CALIBRATION_H2LSB, h2lsb[:])
 	if err != nil {
 		return
 	}
@@ -93,23 +136,45 @@ func (d *Device) Configure() {
 	d.calibrationCoefficients.h4 = 0 + (int16(h2lsb[3]) << 4) | (int16(h2lsb[4] & 0x0F))
 	d.calibrationCoefficients.h5 = 0 + (int16(h2lsb[5]) << 4) | (int16(h2lsb[4]) >> 4)
 
-	d.bus.WriteRegister(uint8(d.Address), CTRL_HUMIDITY_ADDR, []byte{0x3f})
-	d.bus.WriteRegister(uint8(d.Address), CTRL_MEAS_ADDR, []byte{0xB7})
-	d.bus.WriteRegister(uint8(d.Address), CTRL_CONFIG, []byte{0x00})
+	d.Reset()
 
+	legacy.WriteRegister(d.bus, uint8(d.Address), CTRL_CONFIG, []byte{byte(d.Config.Period<<5) | byte(d.Config.IIR<<2)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), CTRL_HUMIDITY_ADDR, []byte{byte(d.Config.Humidity)})
+
+	// Normal mode, start measuring now
+	if d.Config.Mode == ModeNormal {
+		legacy.WriteRegister(d.bus, uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+			byte(d.Config.Temperature<<5) |
+				byte(d.Config.Pressure<<2) |
+				byte(d.Config.Mode)})
+	}
 }
 
 // Connected returns whether a BME280 has been found.
 // It does a "who am I" request and checks the response.
 func (d *Device) Connected() bool {
 	data := []byte{0}
-	d.bus.ReadRegister(uint8(d.Address), WHO_AM_I, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), WHO_AM_I, data)
 	return data[0] == CHIP_ID
 }
 
 // Reset the device
 func (d *Device) Reset() {
-	d.bus.WriteRegister(uint8(d.Address), CMD_RESET, []byte{0xB6})
+	legacy.WriteRegister(d.bus, uint8(d.Address), CMD_RESET, []byte{0xB6})
+}
+
+// SetMode can set the device to Sleep, Normal or Forced mode
+//
+// Calling this method is optional, Configure can be used to set the
+// initial mode if no mode change is desired.  This method is most
+// useful to switch between Sleep and Normal modes.
+func (d *Device) SetMode(mode Mode) {
+	d.Config.Mode = mode
+
+	legacy.WriteRegister(d.bus, uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+		byte(d.Config.Temperature<<5) |
+			byte(d.Config.Pressure<<2) |
+			byte(d.Config.Mode)})
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
@@ -186,7 +251,17 @@ func readIntLE(msb byte, lsb byte) int16 {
 // readData does a burst read from 0xF7 to 0xF0 according to the datasheet
 // resulting in an slice with 8 bytes 0-2 = pressure / 3-5 = temperature / 6-7 = humidity
 func (d *Device) readData() (data [8]byte, err error) {
-	err = d.bus.ReadRegister(uint8(d.Address), REG_PRESSURE, data[:])
+	if d.Config.Mode == ModeForced {
+		// Write the CTRL_MEAS register to trigger a measurement
+		legacy.WriteRegister(d.bus, uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+			byte(d.Config.Temperature<<5) |
+				byte(d.Config.Pressure<<2) |
+				byte(d.Config.Mode)})
+
+		time.Sleep(d.measurementDelay())
+	}
+
+	err = legacy.ReadRegister(d.bus, uint8(d.Address), REG_PRESSURE, data[:])
 	if err != nil {
 		println(err)
 		return
@@ -256,3 +331,39 @@ func (d *Device) calculateHumidity(data [8]byte, tFine int32) int32 {
 	return int32(100 * h)
 
 }
+
+// measurementDelay returns how much time each measurement will take
+// on the device.
+//
+// This is used in forced mode to wait until a measurement is complete.
+func (d *Device) measurementDelay() time.Duration {
+	const MeasOffset = 1250
+	const MeasDur = 2300
+	const HumMeasOffset = 575
+	const MeasScalingFactor = 1000
+
+	// delay is based on over-sampling rate - this table converts from
+	// setting to number samples
+	sampleRateConv := []int{0, 1, 2, 4, 8, 16}
+
+	tempOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		tempOsr = sampleRateConv[d.Config.Temperature]
+	}
+
+	presOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		presOsr = sampleRateConv[d.Config.Pressure]
+	}
+
+	humOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		humOsr = sampleRateConv[d.Config.Humidity]
+	}
+
+	max_delay := ((MeasOffset + (MeasDur * tempOsr) +
+		((MeasDur * presOsr) + HumMeasOffset) +
+		((MeasDur * humOsr) + HumMeasOffset)) / MeasScalingFactor)
+
+	return time.Duration(max_delay) * time.Millisecond
+}

bme280/registers.go

@@ -20,6 +20,50 @@ const (
 	CHIP_ID  = 0x60
 )
 
+// Increasing sampling rate increases precision but also the wait time for measurements. The datasheet has a table of
+// suggested values for oversampling, output data rates, and iir filter coefficients by use case.
+const (
+	SamplingOff Oversampling = iota
+	Sampling1X
+	Sampling2X
+	Sampling4X
+	Sampling8X
+	Sampling16X
+)
+
+// In normal mode (the default) the sensor takes masurements periodically.  In forced
+// mode, the sensor takes a measurement only when requested.
+//
+// For use-cases with infrequent sampling, forced mode is more power efficient.
+const (
+	ModeNormal Mode = 0x03
+	ModeForced Mode = 0x01
+	ModeSleep  Mode = 0x00
+)
+
+// IIR filter coefficients, higher values means steadier measurements but slower reaction times
+const (
+	Coeff0 FilterCoefficient = iota
+	Coeff2
+	Coeff4
+	Coeff8
+	Coeff16
+)
+
+// Period of standby in normal mode which controls how often measurements are taken
+//
+// Note Period10ms and Period20ms are out of sequence, but are per the datasheet
+const (
+	Period0_5ms  Period = 0b000
+	Period62_5ms        = 0b001
+	Period125ms         = 0b010
+	Period250ms         = 0b011
+	Period500ms         = 0b100
+	Period1000ms        = 0b101
+	Period10ms          = 0b110
+	Period20ms          = 0b111
+)
+
 const (
 	SEALEVEL_PRESSURE float32 = 1013.25 // in hPa
 )

bmp180/bmp180.go

@@ -6,9 +6,11 @@
 package bmp180 // import "tinygo.org/x/drivers/bmp180"
 
 import (
+	"math"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // OversamplingMode is the oversampling ratio of the pressure measurement.
@@ -54,7 +56,7 @@ func New(bus drivers.I2C) Device {
 // It does a "who am I" request and checks the response.
 func (d *Device) Connected() bool {
 	data := []byte{0}
-	d.bus.ReadRegister(uint8(d.Address), WHO_AM_I, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), WHO_AM_I, data)
 	return data[0] == CHIP_ID
 }
 
@@ -62,7 +64,7 @@ func (d *Device) Connected() bool {
 // read the calibration coefficients.
 func (d *Device) Configure() {
 	data := make([]byte, 22)
-	err := d.bus.ReadRegister(uint8(d.Address), AC1_MSB, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), AC1_MSB, data)
 	if err != nil {
 		return
 	}
@@ -123,12 +125,27 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 	return 1000 * (p + ((x1 + x2 + 3791) >> 4)), nil
 }
 
+// ReadAltitude returns the current altitude in meters based on the
+// current barometric pressure and estimated pressure at sea level.
+// Calculation is based on code from Adafruit BME280 library
+//
+// https://github.com/adafruit/Adafruit_BME280_Library
+func (d *Device) ReadAltitude() (int32, error) {
+	mPa, err := d.ReadPressure()
+	if err != nil {
+		return 0, err
+	}
+	atmP := float32(mPa) / 100000
+
+	return int32(44330.0 * (1.0 - math.Pow(float64(atmP/SEALEVEL_PRESSURE), 0.1903))), nil
+}
+
 // rawTemp returns the sensor's raw values of the temperature
 func (d *Device) rawTemp() (int32, error) {
-	d.bus.WriteRegister(uint8(d.Address), REG_CTRL, []byte{CMD_TEMP})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_CTRL, []byte{CMD_TEMP})
 	time.Sleep(5 * time.Millisecond)
 	data := make([]byte, 2)
-	err := d.bus.ReadRegister(uint8(d.Address), REG_TEMP_MSB, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_TEMP_MSB, data)
 	if err != nil {
 		return 0, err
 	}
@@ -144,10 +161,10 @@ func (d *Device) calculateB5(rawTemp int32) int32 {
 
 // rawPressure returns the sensor's raw values of the pressure
 func (d *Device) rawPressure(mode OversamplingMode) (int32, error) {
-	d.bus.WriteRegister(uint8(d.Address), REG_CTRL, []byte{CMD_PRESSURE + byte(mode<<6)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_CTRL, []byte{CMD_PRESSURE + byte(mode<<6)})
 	time.Sleep(pauseForReading(mode))
 	data := make([]byte, 3)
-	err := d.bus.ReadRegister(uint8(d.Address), REG_PRESSURE_MSB, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_PRESSURE_MSB, data)
 	if err != nil {
 		return 0, err
 	}

bmp180/registers.go

@@ -28,3 +28,7 @@ const (
 	// ULTRAHIGHRESOLUTION is the highest oversampling mode of the pressure measurement.
 	ULTRAHIGHRESOLUTION
 )
+
+const (
+	SEALEVEL_PRESSURE float32 = 1013.25 // in hPa
+)

bmp280/bmp280.go

@@ -4,6 +4,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // OversamplingMode is the oversampling ratio of the temperature or pressure measurement.
@@ -22,6 +23,7 @@ type Filter uint
 type Device struct {
 	bus         drivers.I2C
 	Address     uint16
+	buf         [6]byte
 	cali        calibrationCoefficients
 	Temperature Oversampling
 	Pressure    Oversampling
@@ -64,14 +66,14 @@ func New(bus drivers.I2C) Device {
 // It does a "who am I" request and checks the response.
 func (d *Device) Connected() bool {
 	data := make([]byte, 1)
-	d.bus.ReadRegister(uint8(d.Address), REG_ID, data)
+	legacy.ReadRegister(d.bus, uint8(d.Address), REG_ID, data)
 	return data[0] == CHIP_ID
 }
 
 // Reset preforms complete power-on-reset procedure.
 // It is required to call Configure afterwards.
 func (d *Device) Reset() {
-	d.bus.WriteRegister(uint8(d.Address), REG_RESET, []byte{CMD_RESET})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_RESET, []byte{CMD_RESET})
 }
 
 // Configure sets up the device for communication and
@@ -85,15 +87,15 @@ func (d *Device) Configure(standby Standby, filter Filter, temp Oversampling, pr
 
 	//  Write the configuration (standby, filter, spi 3 wire)
 	config := uint(d.Standby<<5) | uint(d.Filter<<2) | 0x00
-	d.bus.WriteRegister(uint8(d.Address), REG_CONFIG, []byte{byte(config)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_CONFIG, []byte{byte(config)})
 
 	// Write the control (temperature oversampling, pressure oversampling,
 	config = uint(d.Temperature<<5) | uint(d.Pressure<<2) | uint(d.Mode)
-	d.bus.WriteRegister(uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
+	legacy.WriteRegister(d.bus, uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
 
 	// Read Calibration data
 	data := make([]byte, 24)
-	err := d.bus.ReadRegister(uint8(d.Address), REG_CALI, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_CALI, data)
 	if err != nil {
 		return
 	}
@@ -133,8 +135,8 @@ func (d *Device) PrintCali() {
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
 func (d *Device) ReadTemperature() (temperature int32, err error) {
-	data, err := d.readData(REG_TEMP, 3)
-	if err != nil {
+	data := d.buf[:3]
+	if err = d.readData(REG_TEMP, data); err != nil {
 		return
 	}
 
@@ -157,8 +159,8 @@ func (d *Device) ReadTemperature() (temperature int32, err error) {
 // ReadPressure returns the pressure in milli pascals (mPa).
 func (d *Device) ReadPressure() (pressure int32, err error) {
 	// First 3 bytes are Pressure, last 3 bytes are Temperature
-	data, err := d.readData(REG_PRES, 6)
-	if err != nil {
+	data := d.buf[:6]
+	if err = d.readData(REG_PRES, data); err != nil {
 		return
 	}
 
@@ -202,24 +204,22 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 }
 
 // readData reads n number of bytes of the specified register
-func (d *Device) readData(register int, n int) ([]byte, error) {
+func (d *Device) readData(register int, data []byte) error {
 	// If not in normal mode, set the mode to FORCED mode, to prevent incorrect measurements
 	// After the measurement in FORCED mode, the sensor will return to SLEEP mode
 	if d.Mode != MODE_NORMAL {
 		config := uint(d.Temperature<<5) | uint(d.Pressure<<2) | uint(MODE_FORCED)
-		d.bus.WriteRegister(uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
+		legacy.WriteRegister(d.bus, uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
 	}
 
 	// Check STATUS register, wait if data is not available yet
 	status := make([]byte, 1)
-	for d.bus.ReadRegister(uint8(d.Address), uint8(REG_STATUS), status[0:]); status[0] != 4 && status[0] != 0; d.bus.ReadRegister(uint8(d.Address), uint8(REG_STATUS), status[0:]) {
+	for legacy.ReadRegister(d.bus, uint8(d.Address), uint8(REG_STATUS), status[0:]); status[0] != 4 && status[0] != 0; legacy.ReadRegister(d.bus, uint8(d.Address), uint8(REG_STATUS), status[0:]) {
 		time.Sleep(time.Millisecond)
 	}
 
 	// Read the requested register
-	data := make([]byte, n)
-	err := d.bus.ReadRegister(uint8(d.Address), uint8(register), data[:])
-	return data, err
+	return legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
 }
 
 // convert3Bytes converts three bytes to int32

bmp388/bmp388.go

@@ -4,6 +4,7 @@ import (
 	"errors"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 var (
@@ -240,10 +241,10 @@ func (d *Device) configurationError() bool {
 
 func (d *Device) readRegister(register byte, len int) (data []byte, err error) {
 	data = make([]byte, len)
-	err = d.bus.ReadRegister(d.Address, register, data)
+	err = legacy.ReadRegister(d.bus, d.Address, register, data)
 	return
 }
 
 func (d *Device) writeRegister(register byte, data byte) error {
-	return d.bus.WriteRegister(d.Address, register, []byte{data})
+	return legacy.WriteRegister(d.bus, d.Address, register, []byte{data})
 }

buzzer/buzzer.go

@@ -54,6 +54,12 @@ func (l *Device) Tone(hz, duration float64) (err error) {
 
 	tempo := ((60 / l.BPM) * (duration * 1000))
 
+	// no tone during rest, just let the duration pass.
+	if hz == Rest {
+		time.Sleep(time.Duration(tempo) * time.Millisecond)
+		return
+	}
+
 	for i := 0.0; i < tempo*1000; i += tone * 2.0 {
 		if err = l.On(); err != nil {
 			return

buzzer/notes.go

@@ -1,9 +1,9 @@
 package buzzer
 
 const (
-	Whole   = 4
-	Half    = 2
-	Quarter = 1
+	Whole   = 4.0
+	Half    = 2.0
+	Quarter = 1.0
 	Eighth  = 0.500
 )
 

comboat/comboat.go

@@ -0,0 +1,711 @@
+// Package comboat implements WiFi driver for the Aithinker-Combo-AT WiFi
+// device found on the Elecrow W5 rp2040 and rp2350 devices.  Ths WiFi device
+// is a RTL8720d variant.  The driver interface is via AT command set over UART
+// (see reference docs below).
+//
+// NOTE: the driver doesn't support UDP/TCP server connections in STA mode,
+// currently.  UDP/TCP/TLS client connections are supported in STA mode.
+//
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/instruction/index.html
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/command-set/index.html
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/command-examples/index.html
+
+package comboat // import "tinygo.org/x/drivers/comboat"
+
+import (
+	"bytes"
+	"errors"
+	"fmt"
+	"io"
+	"machine"
+	"net"
+	"net/netip"
+	"strconv"
+	"sync"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/netdev"
+	"tinygo.org/x/drivers/netlink"
+)
+
+type Config struct {
+	BaudRate uint32
+	Uart     *machine.UART
+	Tx       machine.Pin
+	Rx       machine.Pin
+}
+
+type socket struct {
+	protocol  int
+	id        string
+	rx        chan []byte
+	remainder []byte
+	laddr     netip.AddrPort // Set in Bind()
+}
+
+type device struct {
+	cfg     *Config
+	uart    *machine.UART
+	uartMu  sync.Mutex
+	mac     net.HardwareAddr
+	ip      netip.Addr
+	gateway netip.Addr
+	buf     [1500]byte
+	pos     int
+	last    []byte
+	ok      chan bool
+	txReady chan bool
+	accept  chan string
+	err     chan error
+	sockets [8]*socket
+	sync.Mutex
+}
+
+func NewDevice(cfg *Config) *device {
+	return &device{
+		cfg:     cfg,
+		ok:      make(chan bool),
+		txReady: make(chan bool),
+		accept:  make(chan string),
+		err:     make(chan error),
+	}
+}
+
+func logDebug(msg string) {
+	//println("[DEBUG] " + msg)
+}
+
+func logError(msg string) {
+	println("[ERROR] " + msg)
+}
+
+func split(resp []byte, part int, del, on string) string {
+	parts := bytes.Split(resp, []byte(del))
+	if part >= len(parts) {
+		return "Split parts error getting " + on
+	}
+	return string(parts[part])
+}
+
+func (d *device) getFWVersion() string {
+	return split(d.last, 1, ":", "FW version")
+}
+
+func (d *device) saveMAC() {
+	raw := split(d.last, 1, ":", "MAC")
+	if len(raw) > 11 {
+		macStr := fmt.Sprintf("%s:%s:%s:%s:%s:%s",
+			raw[0:2], raw[2:4], raw[4:6],
+			raw[6:8], raw[8:10], raw[10:12])
+		d.mac, _ = net.ParseMAC(macStr)
+	}
+}
+
+var countryCodes = map[int]string{
+	1:  "JP Japan",
+	2:  "American Samoa",
+	3:  "CA Canada",
+	4:  "US",
+	5:  "CN China",
+	6:  "Hong Kong, China",
+	7:  "Taiwan, China",
+	8:  "MO Macau, China",
+	9:  "IL Israel",
+	10: "Singapore",
+	11: "KR South Korea",
+	12: "TR Türkiye",
+	13: "AU Australia",
+	14: "ZA South Africa",
+	15: "BR Brazil",
+}
+
+func (d *device) getCountry() (code string) {
+	code = split(d.last, 1, ":", "county code")
+	codeNum, err := strconv.Atoi(code)
+	if err != nil {
+		return
+	}
+	if val, ok := countryCodes[codeNum]; ok {
+		code = val
+	}
+	return
+}
+
+func (d *device) saveIP() {
+	ipStr := split(d.last, 7, ",", "IP address")
+	gwStr := split(d.last, 8, ",", "gateway address")
+	d.ip, _ = netip.ParseAddr(ipStr)
+	d.gateway, _ = netip.ParseAddr(gwStr)
+}
+
+func (d *device) execute(cmd string, timeout int) (err error) {
+	logDebug("EXECUTE " + cmd)
+
+	d.uartMu.Lock()
+	_, err = d.uart.Write([]byte(cmd + "\r\n"))
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return
+	}
+
+	t := time.NewTicker(time.Duration(timeout) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return errors.New("Timed out")
+	case <-d.ok:
+		return
+	case err = <-d.err:
+		return
+	}
+}
+
+func (d *device) send(cmd string, timeout int) (err error) {
+	logDebug("EXECUTE " + cmd)
+
+	d.uartMu.Lock()
+	_, err = d.uart.Write([]byte(cmd + "\r\n"))
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return
+	}
+
+	t := time.NewTicker(time.Duration(timeout) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return errors.New("Timed out")
+	case <-d.txReady:
+		return
+	case err = <-d.err:
+		return
+	}
+}
+
+func (d *device) findSocket(id string) (*socket, error) {
+	for _, s := range d.sockets {
+		if s.id == id {
+			return s, nil
+		}
+	}
+	return nil, errors.New("Socket not found with id: " + id)
+}
+
+func (d *device) getSocket(sockfd int) (*socket, error) {
+	if sockfd < 0 || sockfd+1 > len(d.sockets) {
+		return nil, netdev.ErrInvalidSocketFd
+	}
+	if d.sockets[sockfd] == nil {
+		return nil, netdev.ErrInvalidSocketFd
+	}
+	return d.sockets[sockfd], nil
+}
+
+func (d *device) handle(event []byte) {
+	logDebug("GOT EVENT " + string(event))
+	switch {
+
+	// SocketDisconnect,<id>
+	case bytes.HasPrefix(event, []byte("SocketDisconnect")):
+		id := split(event, 1, ",", "SocketDisconnect")
+		s, err := d.findSocket(id)
+		if err == nil {
+			close(s.rx) // Sends io.EOF
+		}
+
+	// SocketSeed,<id>,<server id>
+	case bytes.HasPrefix(event, []byte("SocketSeed,2,1")):
+		//d.uart.Write([]byte("AT+SOCKET?" + "\r\n"))
+	}
+}
+
+func (d *device) processUART() {
+
+	if d.pos == 1 && d.buf[0] == '>' {
+		d.pos = 0
+		logDebug("GOT >")
+		d.txReady <- true
+	}
+
+	sofar := d.buf[:d.pos]
+
+	if !bytes.HasSuffix(sofar, []byte("\r\n")) {
+		return
+	}
+
+	// Strip CR/LF off end
+	sofar = sofar[:len(sofar)-2]
+
+	switch {
+
+	case bytes.HasPrefix(sofar, []byte("+EVENT:SocketDown")):
+		// +EVENT:SocketDown,<id>,<length>,<data>
+		parts := bytes.SplitN(sofar, []byte(","), 4)
+		if len(parts) != 4 {
+			logError("Error parsing +EVENT:SocketDown: " + string(sofar))
+			d.pos = 0
+			return
+		}
+		id := string(parts[1])
+		length, err := strconv.Atoi(string(parts[2]))
+		if err != nil {
+			logError("Error parsing length from: " + string(parts[2]))
+			d.pos = 0
+			return
+		}
+		if length != len(parts[3]) {
+			// This can happen if <data> actually contains a CR/LF.
+			// Return without resetting d.pos to continue reading
+			// in the full <data>.
+			return
+		}
+		s, err := d.findSocket(id)
+		if err != nil {
+			logError(err.Error())
+			d.pos = 0
+			return
+		}
+		logDebug("GOT +EVENT:SocketDown," + id + "," + string(parts[2]))
+		d.pos = 0
+		data := make([]byte, len(parts[3]))
+		copy(data, parts[3])
+		s.rx <- data
+
+	case bytes.HasPrefix(sofar, []byte("OK")):
+		d.pos = 0
+		logDebug("GOT OK")
+		d.ok <- true
+
+	case bytes.HasPrefix(sofar, []byte("ERROR")):
+		d.pos = 0
+		logDebug("GOT ERROR")
+		errStr := getErrStr(d.last)
+		d.err <- errors.New(errStr)
+
+	case bytes.HasPrefix(sofar, []byte("+EVENT:")):
+		d.pos = 0
+		event := sofar[len("+EVENT:"):]
+		d.handle(event)
+
+	default:
+		// Catch everything else and store in d.last
+		d.pos = 0
+		size := len(sofar)
+		if size > 0 {
+			d.last = make([]byte, size)
+			copy(d.last, sofar[:size])
+			logDebug("GOT LINE " + string(d.last))
+		}
+	}
+}
+
+func (d *device) serviceUART() {
+	for {
+		d.uartMu.Lock()
+		for d.uart.Buffered() > 0 {
+			if d.pos >= len(d.buf) {
+				println("Trying to write past buffer")
+				d.pos = 0
+				break
+			}
+			var err error
+			d.buf[d.pos], err = d.uart.ReadByte()
+			if err == nil {
+				d.pos++
+				d.processUART()
+			}
+		}
+		d.uartMu.Unlock()
+		time.Sleep(10 * time.Millisecond)
+	}
+}
+
+func (d *device) NetConnect(params *netlink.ConnectParams) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	d.uart = d.cfg.Uart
+	d.uart.Configure(machine.UARTConfig{
+		BaudRate: d.cfg.BaudRate,
+		TX:       d.cfg.Tx,
+		RX:       d.cfg.Rx,
+	})
+
+	go d.serviceUART()
+
+	fmt.Printf("\r\n")
+	fmt.Printf("TinyGo Combo-AT WiFi network device driver\r\n")
+
+	fmt.Printf("\r\n")
+	fmt.Printf("Driver version            : %s\r\n", drivers.Version)
+
+	if len(params.Ssid) == 0 {
+		return netlink.ErrMissingSSID
+	}
+
+	// AT Test to see if device is alive
+	if err := d.execute("AT", 1000); err != nil {
+		return err
+	}
+
+	// Disable echo
+	if err := d.execute("ATE0", 1000); err != nil {
+		return err
+	}
+
+	// Get FW version
+	if err := d.execute("AT+GMR", 1000); err != nil {
+		return err
+	}
+	fmt.Printf("Combo-AT firmware version : %s\r\n", d.getFWVersion())
+
+	// Get/save MAC addresses
+	if err := d.execute("AT+CIPSTAMAC_DEF?", 1000); err != nil {
+		return err
+	}
+	d.saveMAC()
+	fmt.Printf("MAC address               : %s\r\n", d.mac.String())
+
+	// Set country code US
+	if err := d.execute("AT+WCOUNTRY=4", 1000); err != nil {
+		return err
+	}
+
+	// Get country code
+	if err := d.execute("AT+WCOUNTRY?", 1000); err != nil {
+		return err
+	}
+	fmt.Printf("WiFi country code         : %s\r\n", d.getCountry())
+
+	// Set Wi-Fi working mode to STA and save to flash
+	if err := d.execute("AT+WMODE=1,1", 1000); err != nil {
+		return err
+	}
+
+	// Connect to Wifi AP (keep trying until connected)
+	fmt.Printf("\r\n")
+	cmd := "AT+WJAP=" + params.Ssid + "," + params.Passphrase
+
+	for {
+		fmt.Printf("Connecting to WiFi SSID '%s'...", params.Ssid)
+		if err := d.execute(cmd, 20000); err != nil {
+			fmt.Printf("FAILED (%s)\r\n", err.Error())
+			continue
+		}
+		break
+	}
+
+	fmt.Printf("CONNECTED\r\n")
+
+	// Automatically reconnect to Wi-Fi after power on
+	if err := d.execute("AT+WAUTOCONN=1", 1000); err != nil {
+		return err
+	}
+
+	// Get/save IP/gateway addresses
+	if err := d.execute("AT+WJAP?", 1000); err != nil {
+		return err
+	}
+	d.saveIP()
+
+	fmt.Printf("\r\n")
+	fmt.Printf("DHCP-assigned IP          : %s\r\n", d.ip)
+	fmt.Printf("DHCP-assigned gateway     : %s\r\n", d.gateway)
+	fmt.Printf("\r\n")
+
+	// Set socket receiving mode to active
+	if err := d.execute("AT+SOCKETRECVCFG=1", 1000); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (d *device) NetDisconnect() {
+	d.Lock()
+	defer d.Unlock()
+	// Disconnect from WiFi AP
+	d.execute("AT+WDISCONNECT", 1000)
+}
+
+func (d *device) NetNotify(cb func(netlink.Event)) {
+	fmt.Printf("\r\n%s\r\n", netlink.ErrNotSupported)
+}
+
+func (d *device) GetHardwareAddr() (net.HardwareAddr, error) {
+	return d.mac, nil
+}
+
+func (d *device) _getHostByName(name string) (ip netip.Addr, err error) {
+	if err = d.execute("AT+WDOMAIN="+name, 1000); err != nil {
+		return
+	}
+	ipStr := split(d.last, 1, ":", "host by name")
+	return netip.ParseAddr(ipStr)
+}
+
+func (d *device) GetHostByName(name string) (ip netip.Addr, err error) {
+
+	// If it's already a dotted-network address, and not a host name,
+	// return it
+	ip, err = netip.ParseAddr(name)
+	if err == nil {
+		return
+	}
+
+	d.Lock()
+	defer d.Unlock()
+
+	return d._getHostByName(name)
+}
+
+func (d *device) Addr() (netip.Addr, error) {
+	return d.ip, nil
+}
+
+func (d *device) Socket(domain, stype, protocol int) (int, error) {
+
+	switch domain {
+	case netdev.AF_INET:
+	default:
+		return -1, netdev.ErrFamilyNotSupported
+	}
+
+	switch {
+	case protocol == netdev.IPPROTO_TCP && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_TLS && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_UDP && stype == netdev.SOCK_DGRAM:
+	default:
+		return -1, netdev.ErrProtocolNotSupported
+	}
+
+	d.Lock()
+	defer d.Unlock()
+
+	// Search for empty slot in sockets array
+	for fd, s := range d.sockets {
+		if s == nil {
+			// Found one
+			d.sockets[fd] = &socket{
+				protocol: protocol,
+				rx:       make(chan []byte, 10),
+			}
+			return fd, nil
+		}
+	}
+
+	return -1, netdev.ErrNoMoreSockets
+}
+
+func (d *device) Bind(sockfd int, ip netip.AddrPort) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	s.laddr = ip
+	return nil
+}
+
+func (d *device) Connect(sockfd int, host string, ip netip.AddrPort) error {
+
+	var addr string
+	var cmd string
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	if host == "" {
+		addr = ip.Addr().String()
+	} else {
+		ip, err := d._getHostByName(host)
+		if err != nil {
+			return err
+		}
+		addr = ip.String()
+	}
+	port := strconv.Itoa(int(ip.Port()))
+
+	switch s.protocol {
+	case netdev.IPPROTO_UDP:
+		cmd = "AT+SOCKET=2," + addr + "," + port
+	case netdev.IPPROTO_TCP:
+		cmd = "AT+SOCKET=4," + addr + "," + port
+	case netdev.IPPROTO_TLS:
+		cmd = "AT+SOCKET=7," + addr + "," + port
+	}
+
+	if cmd == "" {
+		return netdev.ErrProtocolNotSupported
+	}
+
+	if err := d.execute(cmd, 20000); err != nil {
+		return err
+	}
+
+	s.id = split(d.last, 1, "=", "connection ID")
+
+	return nil
+}
+
+func (d *device) Listen(sockfd, backlog int) error {
+
+	// TODO Creating a TCP server socket isn't working when in STA mode,
+	// TODO returning error "Socket bind error".
+	// TODO The reference example shows a TCP server example in AP mode.
+
+	/*
+		var cmd string
+
+		d.Lock()
+		defer d.Unlock()
+
+		s, err := d.getSocket(sockfd)
+		if err != nil {
+			return err
+		}
+
+		port := strconv.Itoa(int(s.laddr.Port()))
+
+		switch s.protocol {
+		case netdev.IPPROTO_UDP:
+			cmd = "AT+SOCKET=1," + port
+		case netdev.IPPROTO_TCP:
+			cmd = "AT+SOCKET=3," + port
+		}
+
+		if cmd == "" {
+			return netdev.ErrProtocolNotSupported
+		}
+
+		if err := d.execute(cmd, 20000); err != nil {
+			return err
+		}
+
+		s.id = split(d.last, 1, "=", "connection ID")
+	*/
+
+	return netdev.ErrNotSupported
+}
+
+func (d *device) Accept(sockfd int) (int, netip.AddrPort, error) {
+	return 0, netip.AddrPort{}, netdev.ErrNotSupported
+}
+
+func (d *device) Send(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return 0, err
+	}
+
+	cmd := fmt.Sprintf("AT+SOCKETSEND=%s,%d", s.id, len(buf))
+
+	if err := d.send(cmd, 1000); err != nil {
+		return 0, err
+	}
+
+	// AT+SOCKETSEND will sub-packet send data into 1024-byte chunks,
+	// automatically, so send the full buffer in one shot, even if it's
+	// bigger than 1024 bytes.
+
+	d.uartMu.Lock()
+	n, err := d.uart.Write(buf)
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return 0, err
+	}
+
+	// Expecting "OK" after good send, or "ERROR"
+
+	t := time.NewTicker(time.Duration(1000) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return 0, errors.New("Timed out")
+	case <-d.ok:
+		return n, nil
+	case err = <-d.err:
+		return 0, err
+	}
+}
+
+func (d *device) Recv(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return 0, err
+	}
+
+	// 1. Use leftover data first
+	if len(s.remainder) > 0 {
+		n := copy(buf, s.remainder)
+		s.remainder = s.remainder[n:]
+		return n, nil
+	}
+
+	// 2. Get new data from the channel
+	data, ok := <-s.rx
+	if !ok {
+		// Socket closed, return EOF
+		return 0, io.EOF
+	}
+
+	// 3. Copy data, handle leftovers
+	n := copy(buf, data)
+	if n < len(data) {
+		s.remainder = data[n:]
+	}
+
+	return n, nil
+}
+
+func (d *device) Close(sockfd int) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	// Delete socket only if connection was successful (s.id is set)
+	if s.id != "" {
+		cmd := fmt.Sprintf("AT+SOCKETDEL=%s", s.id)
+		if err = d.execute(cmd, 1000); err != nil {
+			return err
+		}
+	}
+
+	d.sockets[sockfd] = nil
+
+	return nil
+}
+
+func (d *device) SetSockOpt(sockfd, level, opt int, value interface{}) error {
+	return netdev.ErrNotSupported
+}

comboat/errors.go

@@ -0,0 +1,86 @@
+package comboat
+
+import (
+	"bytes"
+	"strconv"
+)
+
+var errStrings = map[int]string{
+
+	// System framework related error codes
+
+	0:  "success",
+	1:  "The command is not supported (the combo framework contains the command but the current platform has not transplanted or adapted to support it)",
+	2:  "The command parameters contain unsupported operations (the current platform only supports some operations for this command)",
+	3:  "The instruction format is incorrect (this refers to the wrong number of parameters, for example, two parameters are required, but only one parameter is entered)",
+	4:  "Parameter error (the content of the parameter is wrong, for example, a number between 0 and 9 is required, but 10 or xyz is passed in, which is a parameter error)",
+	5:  "Parameter length error (command length exceeds the maximum supported length)",
+	31: "The current command has not ended and needs to report the status asynchronously. This value is used by the state machine to determine the use of the command and no message is returned.",
+	32: "Unknown error (or unhandled error type)",
+
+	// Common error codes
+
+	33: "malloc error",
+	34: "Failed to read buf",
+	35: "Failed to write buf",
+	36: "Configuration error (configuration error loaded from memory, for example, we set port -1 for OTA upgrade, and check port error when executing AT+OTA, then configuration error will be reported)",
+	37: "Failed to create task",
+	38: "Flash read and write failure",
+	39: "Serial port configuration error, unsupported baud rate",
+	40: "Serial port configuration error, unsupported data bits",
+	41: "Serial port configuration error, unsupported stop bit",
+	42: "Serial port configuration error, unsupported parity bit",
+	43: "Serial port configuration error, unsupported flow control",
+	44: "Serial port configuration failed",
+	45: "Wrong username/password",
+	46: "Low power mode error or unsupported low power mode",
+	47: "Uninitialized configuration data error (including io mapping data)",
+	63: "General error code (without other information)",
+
+	// Wi-Fi related error codes
+
+	64: "Wi-Fi not initialized or initialization failed",
+	65: "Wi-Fi mode error (unable to connect to Wi-Fi in single AP mode)",
+	66: "Wi-Fi connection failed",
+	67: "Wi-Fi connection successful, error in obtaining IP (DHCP)",
+	68: "Failed to obtain encryption method",
+	69: "The specified AP was not found.",
+	70: "Wi-Fi scan start failed",
+	71: "Wi-Fi scan timeout",
+	72: "Failed to enable AP hotspot",
+	73: "Failed to obtain the Wi-Fi information of the router or the AP information that you enabled yourself",
+	74: "The network card (STA/AP) is not running",
+	75: "Wi-Fi country code error (unsupported Wi-Fi country code)",
+	76: "The current network configuration mode is wrong.",
+	95: "Wi-Fi connection unknown error",
+
+	// Socket related error codes
+
+	96:  "Failed to create socket",
+	97:  "Socket connection failed",
+	98:  "DNS Failure",
+	99:  "The socket status is wrong (for example, TCP is not connected yet)",
+	100: "Socket type error",
+	101: "Socket send failed",
+	102: "Socket receive failed",
+	103: "Socket monitoring thread creation failed",
+	104: "Socket bind error",
+	105: "The current connection cannot be transparently linked (wrong socket type or number)",
+	106: "PING test failed (all packets lost)",
+	107: "Wi-Fi country code error (unsupported Wi-Fi country code)",
+	108: "SSL Config Error",
+	109: "SSL verification error (usually caused by unsupported SSL encryption type or certificate error)",
+	127: "Unknown socket error",
+}
+
+func getErrStr(errLine []byte) (errStr string) {
+	errStr = "Can't parse ERROR response"
+	tokens := bytes.Split(errLine, []byte(":"))
+	if len(tokens) > 1 {
+		errCode, err := strconv.Atoi(string(tokens[1]))
+		if err == nil {
+			errStr = errStrings[errCode]
+		}
+	}
+	return
+}

delay/sleep.c

@@ -0,0 +1,54 @@
+#include <stdint.h>
+#include <stdbool.h>
+
+// Loop the given times, where one loop takes four CPU cycles.
+bool tinygo_drivers_sleep(uint32_t cycles) {
+    // In this function, a [n] comment indicates the number of cycles an
+    // instruction or a set of instructions take. This is typically 1 for most
+    // arithmetic instructions, and a bit more for branches.
+#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__
+    // Inline assembly for Cortex-M0/M0+/M3/M4/M7.
+    // The Cortex-M0 (but not M0+) takes one more cycle, so is off by 12.5%.
+    // Others should be basically cycle-accurate (with a slight overhead to
+    // calculate the number of cycles). Unfortunately, there doesn't appear to
+    // be a preprocessor macro to detect the Cortex-M0 specifically (although we
+    // could rely on macros like NRF51).
+
+    // Each loop takes 8 cycles (5 nops, 1 sub, and 2 for the branch).
+    uint32_t loops = (cycles + 7) / 8;
+    __asm__ __volatile__(
+        "1:\n\t"
+        "nop\n\t"               // [5] nops
+        "nop\n\t"
+        "nop\n\t"
+        "nop\n\t"
+        "nop\n\t"
+        "subs %[loops], #1\n\t" // [1]
+        "bne 1b"                // [1-4], at least 2 cycles if taken
+        : [loops]"+r"(loops)
+    );
+    return true;
+#elif __XTENSA__
+    // Inline assembly for Xtensa.
+    // I don't know exactly how many cycles a branch takes, so I've taken a
+    // conservative guess and assume it takes only one cycle. In practice, it's
+    // probably more than that.
+    uint32_t loops = (cycles + 7) / 8;
+    __asm__ __volatile__(
+        "1:\n\t"
+        "nop\n\t"                         // [6] nops
+        "nop\n\t"
+        "nop\n\t"
+        "nop\n\t"
+        "nop\n\t"
+        "nop\n\t"
+        "addi %[loops], %[loops], -1\n\t" // [1]
+        "bnez %[loops], 1b"               // [1?]
+        : [loops]"+r"(loops)
+    );
+    return true;
+#else
+    // Unknown architecture, so fall back to time.Sleep.
+    return false;
+#endif
+}

delay/sleep.go

@@ -0,0 +1,57 @@
+package delay
+
+import (
+	"machine"
+	"time"
+)
+
+/*
+#include <stdint.h>
+#include <stdbool.h>
+bool tinygo_drivers_sleep(uint32_t ticks);
+*/
+import "C"
+
+// Sleep for a very precise short duration by busy-waiting for the given time.
+// This is not an efficient way to sleep: it will needlessly burn cycles while
+// sleeping. But it is useful for sleeping for a very short duration, for
+// example for bit-banged protocols.
+//
+// Longer durations (longer than a few milliseconds) will be handled by calling
+// time.Sleep instead.
+//
+// This function should be called with a constant duration value, in which case
+// the call will typically be fully inlined and only take up around nine
+// instructions for the entire loop.
+//
+//go:inline
+func Sleep(duration time.Duration) {
+	if time.Duration(uint32(duration)&0xff_ffff) != duration {
+		// This is a long duration (more than 16ms) which shouldn't be done by
+		// busy-waiting.
+		time.Sleep(duration)
+		return
+	}
+
+	// Calculate the number of cycles we should sleep:
+	//   cycles = duration * freq / 1e9
+	// Avoiding a 64-bit division:
+	//   cycles = duration * (freq/1000_000) / 1000
+	//
+	// This assumes:
+	//   * The CPU frequency is a constant and can trivially be
+	//     const-propagated, therefore the divide by 1000_000 is done at compile
+	//     time.
+	//   * The CPU frequency is a multiple of 1000_000, which is true for most
+	//     chips (examples: 16MHz, 48MHz, 120MHz, etc).
+	//   * The division by 1000 can be done efficiently (Cortex-M3 and up), or
+	//     can be fully const-propagated.
+	//   * The CPU frequency is lower than 256MHz. If it is higher, long sleep
+	//     times (1-16ms) may not work correctly.
+	cycles := uint32(duration) * (machine.CPUFrequency() / 1000_000) / 1000
+	slept := C.tinygo_drivers_sleep(C.uint32_t(cycles))
+	if !slept {
+		// Fallback for platforms without inline assembly support.
+		time.Sleep(duration)
+	}
+}

dht/constants.go

@@ -1,5 +1,4 @@
 //go:build tinygo
-// +build tinygo
 
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //

dht/highfreq.go

@@ -1,5 +1,4 @@
 //go:build mimxrt1062 || stm32f405 || atsamd51 || stm32f103xx || k210 || stm32f407
-// +build mimxrt1062 stm32f405 atsamd51 stm32f103xx k210 stm32f407
 
 package dht // import "tinygo.org/x/drivers/dht"
 

dht/lowfreq.go

@@ -1,5 +1,4 @@
 //go:build !mimxrt1062 && !stm32f405 && !atsamd51 && !stm32f103xx && !k210 && !stm32f407
-// +build !mimxrt1062,!stm32f405,!atsamd51,!stm32f103xx,!k210,!stm32f407
 
 package dht // import "tinygo.org/x/drivers/dht"
 

dht/thermometer.go

@@ -1,5 +1,4 @@
 //go:build tinygo
-// +build tinygo
 
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //
@@ -11,6 +10,7 @@ package dht // import "tinygo.org/x/drivers/dht"
 
 import (
 	"machine"
+	"runtime/interrupt"
 	"time"
 )
 
@@ -160,8 +160,8 @@ func (t *device) read() error {
 // interrupts
 func receiveSignals(pin machine.Pin, result []counter) {
 	i := uint8(0)
-	machine.UART1.Interrupt.Disable()
-	defer machine.UART1.Interrupt.Enable()
+	mask := interrupt.Disable()
+	defer interrupt.Restore(mask)
 	for ; i < 40; i++ {
 		result[i*2] = expectChange(pin, false)
 		result[i*2+1] = expectChange(pin, true)

dht/timesafethermometer.go

@@ -1,5 +1,4 @@
 //go:build tinygo
-// +build tinygo
 
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //

dht/util.go

@@ -1,5 +1,4 @@
 //go:build tinygo
-// +build tinygo
 
 package dht // import "tinygo.org/x/drivers/dht"
 

displayer.go

@@ -12,3 +12,19 @@ type Displayer interface {
 	// Display sends the buffer (if any) to the screen.
 	Display() error
 }
+
+// Rotation is how much a display has been rotated. Displays can be rotated, and
+// sometimes also mirrored.
+type Rotation uint8
+
+// Clockwise rotation of the screen.
+const (
+	Rotation0 = iota
+	Rotation90
+	Rotation180
+	Rotation270
+	Rotation0Mirror
+	Rotation90Mirror
+	Rotation180Mirror
+	Rotation270Mirror
+)

ds1307/ds1307.go

@@ -9,6 +9,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // Device wraps an I2C connection to a DS1307 device.
@@ -44,7 +45,7 @@ func (d *Device) SetTime(t time.Time) error {
 // ReadTime returns the date and time
 func (d *Device) ReadTime() (time.Time, error) {
 	data := make([]byte, 8)
-	err := d.bus.ReadRegister(d.Address, uint8(TimeDate), data)
+	err := legacy.ReadRegister(d.bus, d.Address, uint8(TimeDate), data)
 	if err != nil {
 		return time.Time{}, err
 	}
@@ -105,7 +106,7 @@ func (d *Device) Read(data []uint8) (n int, err error) {
 	if int(d.AddressSRAM)+len(data)-1 > SRAMEndAddress {
 		return 0, errors.New("EOF")
 	}
-	err = d.bus.ReadRegister(d.Address, d.AddressSRAM, data)
+	err = legacy.ReadRegister(d.bus, d.Address, d.AddressSRAM, data)
 	if err != nil {
 		return 0, err
 	}
@@ -124,7 +125,7 @@ func (d *Device) SetOscillatorFrequency(sqw uint8) error {
 // IsOscillatorRunning returns if the oscillator is running
 func (d *Device) IsOscillatorRunning() bool {
 	data := []byte{0}
-	err := d.bus.ReadRegister(d.Address, uint8(TimeDate), data)
+	err := legacy.ReadRegister(d.bus, d.Address, uint8(TimeDate), data)
 	if err != nil {
 		return false
 	}
@@ -134,7 +135,7 @@ func (d *Device) IsOscillatorRunning() bool {
 // SetOscillatorRunning starts/stops internal oscillator by toggling halt bit
 func (d *Device) SetOscillatorRunning(running bool) error {
 	data := make([]byte, 3)
-	err := d.bus.ReadRegister(d.Address, uint8(TimeDate), data)
+	err := legacy.ReadRegister(d.bus, d.Address, uint8(TimeDate), data)
 	if err != nil {
 		return err
 	}

ds18b20/ds18b20.go

@@ -0,0 +1,89 @@
+// Package ds18b20 provides a driver for the DS18B20 digital thermometer
+//
+// Datasheet:
+// https://www.analog.com/media/en/technical-documentation/data-sheets/DS18B20.pdf
+package ds18b20 // import "tinygo.org/x/drivers/ds18b20"
+
+import (
+	"errors"
+)
+
+// Device ROM commands
+const (
+	CONVERT_TEMPERATURE uint8 = 0x44
+	READ_SCRATCHPAD     uint8 = 0xBE
+	WRITE_SCRATCHPAD    uint8 = 0x4E
+)
+
+type OneWireDevice interface {
+	Write(uint8)
+	Read() uint8
+	Select([]uint8) error
+	Сrc8([]uint8) uint8
+}
+
+// Device wraps a connection to an 1-Wire devices.
+type Device struct {
+	owd OneWireDevice
+}
+
+// Errors list
+var (
+	errReadTemperature = errors.New("Error: DS18B20. Read temperature error: CRC mismatch.")
+)
+
+func New(owd OneWireDevice) Device {
+	return Device{
+		owd: owd,
+	}
+}
+
+// Configure. Initializes the device, left for compatibility reasons.
+func (d Device) Configure() {}
+
+// ThermometerResolution sets thermometer resolution from 9 to 12 bits
+func (d Device) ThermometerResolution(romid []uint8, resolution uint8) {
+	if 9 <= resolution && resolution <= 12 {
+		d.owd.Select(romid)
+		d.owd.Write(WRITE_SCRATCHPAD)               // send three data bytes to scratchpad (TH, TL, and config)
+		d.owd.Write(0xFF)                           // to TH
+		d.owd.Write(0x00)                           // to TL
+		d.owd.Write(((resolution - 9) << 5) | 0x1F) // to resolution config
+	}
+}
+
+// RequestTemperature sends request to device
+func (d Device) RequestTemperature(romid []uint8) {
+	d.owd.Select(romid)
+	d.owd.Write(CONVERT_TEMPERATURE)
+}
+
+// ReadTemperatureRaw returns the raw temperature.
+// ScratchPad memory map:
+// byte 0: Temperature LSB
+// byte 1: Temperature MSB
+func (d Device) ReadTemperatureRaw(romid []uint8) ([]uint8, error) {
+	spb := make([]uint8, 9) // ScratchPad buffer
+	d.owd.Select(romid)
+	d.owd.Write(READ_SCRATCHPAD)
+	for i := 0; i < 9; i++ {
+		spb[i] = d.owd.Read()
+	}
+	if d.owd.Сrc8(spb) != 0 {
+		return nil, errReadTemperature
+	}
+	return spb[:2:2], nil
+}
+
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
+func (d Device) ReadTemperature(romid []uint8) (int32, error) {
+	raw, err := d.ReadTemperatureRaw(romid)
+	if err != nil {
+		return 0, err
+	}
+	t := int32(uint16(raw[0]) | uint16(raw[1])<<8)
+	if t&0x8000 == 0x8000 {
+		t -= 0x10000
+	}
+	return (t * 625 / 10), nil
+}

ds3231/ds3231.go

@@ -8,6 +8,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 type Mode uint8
@@ -37,7 +38,7 @@ func (d *Device) Configure() bool {
 // IsTimeValid return true/false is the time in the device is valid
 func (d *Device) IsTimeValid() bool {
 	data := []byte{0}
-	err := d.bus.ReadRegister(uint8(d.Address), REG_STATUS, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_STATUS, data)
 	if err != nil {
 		return false
 	}
@@ -47,7 +48,7 @@ func (d *Device) IsTimeValid() bool {
 // IsRunning returns if the oscillator is running
 func (d *Device) IsRunning() bool {
 	data := []uint8{0}
-	err := d.bus.ReadRegister(uint8(d.Address), REG_CONTROL, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_CONTROL, data)
 	if err != nil {
 		return false
 	}
@@ -57,7 +58,7 @@ func (d *Device) IsRunning() bool {
 // SetRunning starts the internal oscillator
 func (d *Device) SetRunning(isRunning bool) error {
 	data := []uint8{0}
-	err := d.bus.ReadRegister(uint8(d.Address), REG_CONTROL, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_CONTROL, data)
 	if err != nil {
 		return err
 	}
@@ -66,22 +67,32 @@ func (d *Device) SetRunning(isRunning bool) error {
 	} else {
 		data[0] |= 1 << EOSC
 	}
-	err = d.bus.WriteRegister(uint8(d.Address), REG_CONTROL, data)
+	err = legacy.WriteRegister(d.bus, uint8(d.Address), REG_CONTROL, data)
 	if err != nil {
 		return err
 	}
 	return nil
 }
 
-// SetTime sets the date and time in the DS3231
+// SetTime sets the date and time in the DS3231. The DS3231 hardware supports
+// only a 2-digit year field, so the current year will be stored as an offset
+// from the year 2000, which supports the year 2000 until 2100.
+//
+// The DS3231 also supports a one-bit 'century' flag which is set by the chip
+// when the year field rolls over from 99 to 00. The current code interprets
+// this flag to be the year 2100, which appears to extend the range of years
+// until the year 2200. However the DS3231 does not incorporate the 'century'
+// flag in its leap year calculation, so it will incorrectly identify the year
+// 2100 as a leap year, causing it to increment from 2100-02-28 to 2100-02-29
+// instead of 2100-03-01.
 func (d *Device) SetTime(dt time.Time) error {
 	data := []byte{0}
-	err := d.bus.ReadRegister(uint8(d.Address), REG_STATUS, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_STATUS, data)
 	if err != nil {
 		return err
 	}
 	data[0] &^= 1 << OSF
-	err = d.bus.WriteRegister(uint8(d.Address), REG_STATUS, data)
+	err = legacy.WriteRegister(d.bus, uint8(d.Address), REG_STATUS, data)
 	if err != nil {
 		return err
 	}
@@ -92,6 +103,10 @@ func (d *Device) SetTime(dt time.Time) error {
 	data[2] = uint8ToBCD(uint8(dt.Hour()))
 
 	year := uint8(dt.Year() - 2000)
+	// This code interprets the centuryFlag to be the year 2100. Warning: The
+	// DS3231 does not incorporate the centuryFlag in its leap year calculation.
+	// It will increment from 2100-02-28 to 2100-02-29, which is incorrect because
+	// the year 2100 is not a leap year in the Gregorian calendar.
 	centuryFlag := uint8(0)
 	if year >= 100 {
 		year -= 100
@@ -103,7 +118,7 @@ func (d *Device) SetTime(dt time.Time) error {
 	data[5] = uint8ToBCD(uint8(dt.Month()) | centuryFlag)
 	data[6] = uint8ToBCD(year)
 
-	err = d.bus.WriteRegister(uint8(d.Address), REG_TIMEDATE, data)
+	err = legacy.WriteRegister(d.bus, uint8(d.Address), REG_TIMEDATE, data)
 	if err != nil {
 		return err
 	}
@@ -114,7 +129,7 @@ func (d *Device) SetTime(dt time.Time) error {
 // ReadTime returns the date and time
 func (d *Device) ReadTime() (dt time.Time, err error) {
 	data := make([]uint8, 7)
-	err = d.bus.ReadRegister(uint8(d.Address), REG_TIMEDATE, data)
+	err = legacy.ReadRegister(d.bus, uint8(d.Address), REG_TIMEDATE, data)
 	if err != nil {
 		return
 	}
@@ -136,11 +151,31 @@ func (d *Device) ReadTime() (dt time.Time, err error) {
 // ReadTemperature returns the temperature in millicelsius (mC)
 func (d *Device) ReadTemperature() (int32, error) {
 	data := make([]uint8, 2)
-	err := d.bus.ReadRegister(uint8(d.Address), REG_TEMP, data)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), REG_TEMP, data)
 	if err != nil {
 		return 0, err
 	}
-	return int32(data[0])*1000 + int32((data[1]>>6)*25)*10, nil
+	return milliCelsius(data[0], data[1]), nil
+}
+
+// milliCelsius converts the raw temperature bytes (msb and lsb) from the DS3231
+// into a 32-bit signed integer in units of milli Celsius (1/1000 deg C).
+//
+// According to the DS3231 datasheet: "Temperature is represented as a 10-bit
+// code with a resolution of 0.25 deg C and is accessible at location 11h and
+// 12h. The temperature is encoded in two's complement format. The upper 8 bits,
+// the integer portion, are at location 11h and the lower 2 bits, the fractional
+// portion, are in the upper nibble at location 12h."
+//
+// In other words, the msb and lsb bytes should be treated as a signed 16-bit
+// integer in units of (1/256 deg C). It is possible to convert this into a
+// 16-bit signed integer in units of centi Celsius (1/100 deg C) with no loss of
+// precision or dynamic range. But for backwards compatibility, let's instead
+// convert this into a 32-bit signed integer in units of milli Celsius.
+func milliCelsius(msb uint8, lsb uint8) int32 {
+	t256 := int16(uint16(msb)<<8 | uint16(lsb))
+	t1000 := int32(t256) / 64 * 250
+	return t1000
 }
 
 // uint8ToBCD converts a byte to BCD for the DS3231

ds3231/ds3231_test.go

@@ -0,0 +1,76 @@
+package ds3231
+
+import (
+	"testing"
+)
+
+func TestPositiveMilliCelsius(t *testing.T) {
+	t1000 := milliCelsius(0, 0)
+	if t1000 != 0 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0, 0b01000000)
+	if t1000 != 250 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0, 0b10000000)
+	if t1000 != 500 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0, 0b11000000)
+	if t1000 != 750 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(1, 0b00000000)
+	if t1000 != 1000 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(2, 0b00000000)
+	if t1000 != 2000 {
+		t.Fatal(t1000)
+	}
+
+	// highest temperature is 127.750C
+	t1000 = milliCelsius(0x7f, 0b11000000)
+	if t1000 != 127750 {
+		t.Fatal(t1000)
+	}
+}
+
+func TestNegativeMilliCelsius(t *testing.T) {
+	t1000 := milliCelsius(0xff, 0b11000000)
+	if t1000 != -250 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0xff, 0b10000000)
+	if t1000 != -500 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0xff, 0b01000000)
+	if t1000 != -750 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0xff, 0b00000000)
+	if t1000 != -1000 {
+		t.Fatal(t1000)
+	}
+
+	t1000 = milliCelsius(0xfe, 0b00000000)
+	if t1000 != -2000 {
+		t.Fatal(t1000)
+	}
+
+	// lowest temperature is -128.000C
+	t1000 = milliCelsius(0x80, 0b00000000)
+	if t1000 != -128000 {
+		t.Fatal(t1000)
+	}
+}

encoders/quadrature_device.go

@@ -0,0 +1,34 @@
+package encoders
+
+type QuadratureDevice struct {
+	cfg  QuadratureConfig
+	impl quadratureImpl
+}
+
+type QuadratureConfig struct {
+	Precision int
+}
+
+type quadratureImpl interface {
+	configure(cfg QuadratureConfig) error
+	readValue() int
+	writeValue(int)
+}
+
+func (enc *QuadratureDevice) Configure(cfg QuadratureConfig) error {
+	if cfg.Precision < 1 {
+		cfg.Precision = 4
+	}
+	enc.cfg = cfg
+	return enc.impl.configure(cfg)
+}
+
+// Position returns the stored int value for the encoder
+func (enc *QuadratureDevice) Position() int {
+	return enc.impl.readValue() / enc.cfg.Precision
+}
+
+// SetPosition overwrites the currently stored value with the specified int value
+func (enc *QuadratureDevice) SetPosition(v int) {
+	enc.impl.writeValue(v * enc.cfg.Precision)
+}

encoders/quadrature_interrupt.go

@@ -0,0 +1,69 @@
+//go:build tinygo && (rp2040 || rp2350 || stm32 || k210 || esp32c3 || nrf || sam || (avr && (atmega328p || atmega328pb)))
+
+// Implementation based on:
+// https://gist.github.com/aykevl/3fc1683ed77bb0a9c07559dfe857304a
+
+// Note: build constraints in this file list targets that define machine.PinToggle.
+// If this is supported for additional targets in the future, they can be added above.
+
+package encoders
+
+import (
+	"machine"
+	"runtime/volatile"
+)
+
+var (
+	states = []int8{0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0}
+)
+
+// NewQuadratureViaInterrupt returns a rotary encoder device that uses GPIO
+// interrupts and a lookup table to keep track of quadrature state changes.
+//
+// This constructur is only available for TinyGo targets for which machine.PinToggle
+// is defined as a valid interrupt type.
+func NewQuadratureViaInterrupt(pinA, pinB machine.Pin) *QuadratureDevice {
+	return &QuadratureDevice{impl: &quadInterruptImpl{pinA: pinA, pinB: pinB, oldAB: 0b00000011}}
+}
+
+type quadInterruptImpl struct {
+	pinA machine.Pin
+	pinB machine.Pin
+
+	// precision int
+
+	oldAB int
+	value volatile.Register32
+}
+
+func (enc *quadInterruptImpl) configure(cfg QuadratureConfig) error {
+	enc.pinA.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	enc.pinA.SetInterrupt(machine.PinToggle, enc.interrupt)
+
+	enc.pinB.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	enc.pinB.SetInterrupt(machine.PinToggle, enc.interrupt)
+
+	return nil
+}
+
+func (enc *quadInterruptImpl) interrupt(pin machine.Pin) {
+	aHigh, bHigh := enc.pinA.Get(), enc.pinB.Get()
+	enc.oldAB <<= 2
+	if aHigh {
+		enc.oldAB |= 1 << 1
+	}
+	if bHigh {
+		enc.oldAB |= 1
+	}
+	enc.writeValue(enc.readValue() + int(states[enc.oldAB&0x0f]))
+}
+
+// readValue gets the value using volatile operations and returns it as an int
+func (enc *quadInterruptImpl) readValue() int {
+	return int(enc.value.Get())
+}
+
+// writeValue set the value to the specified int using volatile operations
+func (enc *quadInterruptImpl) writeValue(v int) {
+	enc.value.Set(uint32(v))
+}

ens160/ens160.go

@@ -0,0 +1,225 @@
+// Package ens160 provides a driver for the ScioSense ENS160 digital gas sensor.
+//
+// Datasheet: https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
+package ens160
+
+import (
+	"encoding/binary"
+	"errors"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+const (
+	defaultTimeout = 30 * time.Millisecond
+	shortTimeout   = 1 * time.Millisecond
+)
+
+// Conversion constants for environment data compensation.
+const (
+	kelvinOffsetMilli = 273150          // 273.15 K in milli-units
+	tempRawFactor     = 64              // As per datasheet for TEMP_IN
+	humRawFactor      = 512             // As per datasheet for RH_IN
+	milliFactor       = 1000            // For converting from milli-units
+	roundingTerm      = milliFactor / 2 // For rounding before integer division
+)
+
+// validityStrings provides human-readable descriptions for validity flags.
+var validityStrings = [...]string{
+	ValidityNormalOperation:     "normal operation",
+	ValidityWarmUpPhase:         "warm-up phase, wait ~3 minutes for valid data",
+	ValidityInitialStartUpPhase: "initial start-up phase, wait ~1 hour for valid data",
+	ValidityInvalidOutput:       "invalid output",
+}
+
+// Device wraps an I2C connection to an ENS160 device.
+type Device struct {
+	bus  drivers.I2C // I²C implementation
+	addr uint16      // 7‑bit bus address, promoted to uint16 per drivers.I2C
+
+	// shadow registers / last measurements
+	lastTvocPPB  uint16
+	lastEco2PPM  uint16
+	lastAqiUBA   uint8
+	lastValidity uint8 // Store the latest validity status
+
+	// pre‑allocated buffers
+	wbuf [5]byte // longest write: reg + 4 bytes (TEMP+RH)
+	rbuf [5]byte // longest read: DATA burst (5 bytes)
+}
+
+// New returns a new ENS160 driver.
+func New(bus drivers.I2C, addr uint16) *Device {
+	if addr == 0 {
+		addr = DefaultAddress
+	}
+	return &Device{
+		bus:          bus,
+		addr:         addr,
+		lastValidity: ValidityInvalidOutput,
+	}
+}
+
+// Connected returns whether a ENS160 has been found.
+func (d *Device) Connected() bool {
+	d.wbuf[0] = regPartID
+	err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:2])
+	return err == nil && d.rbuf[0] == LowPartID && d.rbuf[1] == HighPartID
+}
+
+// Configure sets up the device for reading.
+func (d *Device) Configure() error {
+	// 1. Soft-reset. The device will automatically enter IDLE mode.
+	if err := d.write1(regOpMode, ModeReset); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	// 2. Clear GPR registers, then go to STANDARD mode.
+	if err := d.write1(regCommand, cmdClrGPR); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	if err := d.write1(regOpMode, ModeStandard); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	return nil
+}
+
+// calculateTempRaw converts temperature from milli-degrees Celsius to the sensor's raw format.
+func calculateTempRaw(tempMilliC int32) uint16 {
+	// Clip temperature
+	const (
+		minC = -40 * 1000
+		maxC = 85 * 1000
+	)
+	if tempMilliC < minC {
+		tempMilliC = minC
+	} else if tempMilliC > maxC {
+		tempMilliC = maxC
+	}
+
+	// Integer fixed-point conversion to format required by the sensor.
+	// Formula from datasheet: T_IN = (T_ambient_C + 273.15) * 64
+	return uint16((((tempMilliC + kelvinOffsetMilli) * tempRawFactor) + roundingTerm) / milliFactor)
+}
+
+// calculateHumRaw converts relative humidity from milli-percent to the sensor's raw format.
+func calculateHumRaw(rhMilliPct int32) uint16 {
+	// Clip humidity
+	if rhMilliPct < 0 {
+		rhMilliPct = 0
+	} else if rhMilliPct > 100*1000 {
+		rhMilliPct = 100 * 1000
+	}
+
+	// Integer fixed-point conversion to format required by the sensor.
+	// Formula from datasheet: RH_IN = (RH_ambient_% * 512)
+	return uint16(((rhMilliPct * humRawFactor) + roundingTerm) / milliFactor)
+}
+
+// SetEnvDataMilli sets the ambient temperature and humidity for compensation.
+//
+// tempMilliC is the temperature in milli-degrees Celsius.
+// rhMilliPct is the relative humidity in milli-percent.
+func (d *Device) SetEnvDataMilli(tempMilliC, rhMilliPct int32) error {
+	tempRaw := calculateTempRaw(tempMilliC)
+	humRaw := calculateHumRaw(rhMilliPct)
+
+	d.wbuf[0] = regTempIn // start address (auto‑increment)
+	binary.LittleEndian.PutUint16(d.wbuf[1:3], tempRaw)
+	binary.LittleEndian.PutUint16(d.wbuf[3:5], humRaw)
+
+	return d.bus.Tx(d.addr, d.wbuf[:5], nil)
+}
+
+// Update refreshes the concentration measurements.
+func (d *Device) Update(which drivers.Measurement) error {
+	if which&drivers.Concentration == 0 {
+		return nil // nothing requested
+	}
+
+	const maxTries = 1000
+	var (
+		status   uint8
+		validity uint8
+	)
+	var gotData bool
+
+	// Poll DEVICE_STATUS until NEWDAT or timeout
+	for range maxTries {
+		var err error
+		status, err = d.read1(regStatus)
+		if err != nil {
+			return err
+		}
+		if status&statusSTATER != 0 {
+			return errors.New("ENS160: error (STATER set)")
+		}
+		validity = (status & statusValidityMask) >> statusValidityShift
+
+		if status&statusNEWDAT != 0 {
+			gotData = true
+			break // Always break when data available
+		}
+		time.Sleep(shortTimeout)
+	}
+	if !gotData {
+		return errors.New("ENS160: timeout waiting for NEWDAT")
+	}
+
+	// Burst-read data regardless of validity state
+	d.wbuf[0] = regAQI
+	if err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:5]); err != nil {
+		return errors.New("ENS160: burst read failed")
+	}
+
+	d.lastAqiUBA = d.rbuf[0]
+	d.lastTvocPPB = binary.LittleEndian.Uint16(d.rbuf[1:3])
+	d.lastEco2PPM = binary.LittleEndian.Uint16(d.rbuf[3:5])
+	d.lastValidity = validity // Store the validity status
+
+	return nil
+}
+
+// TVOC returns the last total‑VOC concentration in parts‑per‑billion.
+func (d *Device) TVOC() uint16 { return d.lastTvocPPB }
+
+// ECO2 returns the last equivalent CO₂ concentration in parts‑per‑million.
+func (d *Device) ECO2() uint16 { return d.lastEco2PPM }
+
+// AQI returns the last Air‑Quality Index according to UBA (1–5).
+func (d *Device) AQI() uint8 { return d.lastAqiUBA }
+
+// Validity returns the current operating state of the sensor.
+func (d *Device) Validity() uint8 {
+	return d.lastValidity
+}
+
+// ValidityString returns a human-readable string describing the current validity status.
+func (d *Device) ValidityString() string {
+	if int(d.lastValidity) < len(validityStrings) {
+		return validityStrings[d.lastValidity]
+	}
+	return "unknown"
+}
+
+// write1 writes a single byte to a register.
+func (d *Device) write1(reg, val uint8) error {
+	d.wbuf[0] = reg
+	d.wbuf[1] = val
+	return d.bus.Tx(d.addr, d.wbuf[:2], nil)
+}
+
+// read1 reads a single byte from a register.
+func (d *Device) read1(reg uint8) (uint8, error) {
+	d.wbuf[0] = reg
+	if err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:1]); err != nil {
+		return 0, err
+	}
+	return d.rbuf[0], nil
+}

ens160/ens160_test.go

@@ -0,0 +1,54 @@
+package ens160
+
+import (
+	"testing"
+)
+
+func TestCalculateTempRaw(t *testing.T) {
+	testCases := []struct {
+		name        string
+		tempMilliC  int32
+		expectedRaw uint16
+	}{
+		{"25°C", 25000, 19082},
+		{"-10.5°C", -10500, 16810},
+		{"Min temp", -40000, 14922},
+		{"Below min", -50000, 14922},
+		{"Max temp", 85000, 22922},
+		{"Above max", 90000, 22922},
+		{"Zero", 0, 17482},
+	}
+
+	for _, tc := range testCases {
+		t.Run(tc.name, func(t *testing.T) {
+			raw := calculateTempRaw(tc.tempMilliC)
+			if raw != tc.expectedRaw {
+				t.Errorf("expected %d, got %d", tc.expectedRaw, raw)
+			}
+		})
+	}
+}
+
+func TestCalculateHumRaw(t *testing.T) {
+	testCases := []struct {
+		name        string
+		rhMilliPct  int32
+		expectedRaw uint16
+	}{
+		{"50%", 50000, 25600},
+		{"0%", 0, 0},
+		{"100%", 100000, 51200},
+		{"Below 0%", -10000, 0},
+		{"Above 100%", 110000, 51200},
+		{"33.3%", 33300, 17050},
+	}
+
+	for _, tc := range testCases {
+		t.Run(tc.name, func(t *testing.T) {
+			raw := calculateHumRaw(tc.rhMilliPct)
+			if raw != tc.expectedRaw {
+				t.Errorf("expected %d, got %d", tc.expectedRaw, raw)
+			}
+		})
+	}
+}

ens160/registers.go

@@ -0,0 +1,65 @@
+package ens160
+
+// DefaultAddress is the default I2C address for the ENS160 when the ADDR pin is
+// connected to high (3.3V). When connected to low (GND), the address is 0x52.
+const DefaultAddress = 0x53
+
+// Registers
+const (
+	regPartID   = 0x00
+	regOpMode   = 0x10
+	regConfig   = 0x11
+	regCommand  = 0x12
+	regTempIn   = 0x13
+	regRhIn     = 0x15
+	regStatus   = 0x20
+	regAQI      = 0x21
+	regTVOC     = 0x22
+	regECO2     = 0x24
+	regDataT    = 0x30
+	regDataRH   = 0x32
+	regMISR     = 0x38
+	regGPRWrite = 0x40
+	regGPRRead  = 0x48
+)
+
+// Operating modes
+const (
+	ModeDeepSleep = 0x00
+	ModeIdle      = 0x01
+	ModeStandard  = 0x02
+	ModeReset     = 0xF0
+)
+
+// Status register bits
+const (
+	statusSTATAS = 1 << 7
+	statusSTATER = 1 << 6
+
+	statusValidityMask  = 0x0C
+	statusValidityShift = 2
+
+	statusNEWDAT = 1 << 1
+	statusNEWGPR = 1 << 0
+)
+
+// Validity flags
+const (
+	ValidityNormalOperation     = 0x00
+	ValidityWarmUpPhase         = 0x01 // need ~3 minutes until valid data
+	ValidityInitialStartUpPhase = 0x02 // need ~1 hour until valid data
+	ValidityInvalidOutput       = 0x03
+)
+
+// Commands
+const (
+	cmdNOP       = 0x00
+	cmdGetAppVer = 0x0E
+	cmdClrGPR    = 0xCC
+)
+
+// Part IDs
+const (
+	LowPartID  = 0x60
+	HighPartID = 0x01
+)

espat/adapter.go

@@ -1,20 +0,0 @@
-package espat
-
-import (
-	"time"
-
-	"tinygo.org/x/drivers/net"
-)
-
-func (d *Device) ConnectToAccessPoint(ssid, pass string, timeout time.Duration) error {
-	if len(ssid) == 0 {
-		return net.ErrWiFiMissingSSID
-	}
-
-	d.SetWifiMode(WifiModeClient)
-	return d.ConnectToAP(ssid, pass, int(timeout.Seconds()))
-}
-
-func (d *Device) Disconnect() error {
-	return d.DisconnectFromAP()
-}

espat/espat.go

@@ -15,41 +15,302 @@
 //
 // AT command set:
 // https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
+//
+// 02/2023    sfeldma@gmail.com    Heavily modified to use netdev interface
+
 package espat // import "tinygo.org/x/drivers/espat"
 
 import (
 	"errors"
+	"fmt"
+	"machine"
+	"net"
+	"net/netip"
 	"strconv"
 	"strings"
+	"sync"
 	"time"
 
-	"tinygo.org/x/drivers"
-	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/netdev"
+	"tinygo.org/x/drivers/netlink"
 )
 
-// Device wraps UART connection to the ESP8266/ESP32.
-type Device struct {
-	bus drivers.UART
+type Config struct {
+	// UART config
+	Uart *machine.UART
+	Tx   machine.Pin
+	Rx   machine.Pin
+}
 
+type socket struct {
+	inUse    bool
+	protocol int
+	laddr    netip.AddrPort
+}
+
+type Device struct {
+	cfg  *Config
+	uart *machine.UART
 	// command responses that come back from the ESP8266/ESP32
 	response []byte
-
 	// data received from a TCP/UDP connection forwarded by the ESP8266/ESP32
-	socketdata []byte
+	data   []byte
+	socket socket
+	mu     sync.Mutex
 }
 
-// ActiveDevice is the currently configured Device in use. There can only be one.
-var ActiveDevice *Device
-
-// New returns a new espat driver. Pass in a fully configured UART bus.
-func New(b drivers.UART) *Device {
-	return &Device{bus: b, response: make([]byte, 512), socketdata: make([]byte, 0, 1024)}
+func NewDevice(cfg *Config) *Device {
+	return &Device{
+		cfg:      cfg,
+		response: make([]byte, 1500),
+		data:     make([]byte, 0, 1500),
+	}
 }
 
-// Configure sets up the device for communication.
-func (d Device) Configure() {
-	ActiveDevice = &d
-	net.ActiveDevice = ActiveDevice
+func (d *Device) NetConnect(params *netlink.ConnectParams) error {
+
+	if len(params.Ssid) == 0 {
+		return netlink.ErrMissingSSID
+	}
+
+	d.uart = d.cfg.Uart
+	d.uart.Configure(machine.UARTConfig{TX: d.cfg.Tx, RX: d.cfg.Rx})
+
+	// Connect to ESP8266/ESP32
+	fmt.Printf("Connecting to device...")
+
+	for i := 0; i < 5; i++ {
+		if d.Connected() {
+			break
+		}
+		time.Sleep(1 * time.Second)
+	}
+
+	if !d.Connected() {
+		fmt.Printf("FAILED\r\n")
+		return netlink.ErrConnectFailed
+	}
+
+	fmt.Printf("CONNECTED\r\n")
+
+	// Connect to Wifi AP
+	fmt.Printf("Connecting to Wifi SSID '%s'...", params.Ssid)
+
+	d.SetWifiMode(WifiModeClient)
+
+	err := d.ConnectToAP(params.Ssid, params.Passphrase, 10 /* secs */)
+	if err != nil {
+		fmt.Printf("FAILED\r\n")
+		return err
+	}
+
+	fmt.Printf("CONNECTED\r\n")
+
+	ip, err := d.Addr()
+	if err != nil {
+		return err
+	}
+	fmt.Printf("DHCP-assigned IP: %s\r\n", ip)
+	fmt.Printf("\r\n")
+
+	return nil
+}
+
+func (d *Device) NetDisconnect() {
+	d.DisconnectFromAP()
+	fmt.Printf("\r\nDisconnected from Wifi\r\n\r\n")
+}
+
+func (d *Device) NetNotify(cb func(netlink.Event)) {
+	fmt.Printf("\r\n%s\r\n", netlink.ErrNotSupported)
+}
+
+func (d *Device) GetHostByName(name string) (netip.Addr, error) {
+	ip, err := d.GetDNS(name)
+	if err != nil {
+		return netip.Addr{}, err
+	}
+	return netip.ParseAddr(ip)
+}
+
+func (d *Device) GetHardwareAddr() (net.HardwareAddr, error) {
+	return net.HardwareAddr{}, netlink.ErrNotSupported
+}
+
+func (d *Device) Addr() (netip.Addr, error) {
+	resp, err := d.GetClientIP()
+	if err != nil {
+		return netip.Addr{}, err
+	}
+	prefix := "+CIPSTA:ip:"
+	for _, line := range strings.Split(resp, "\n") {
+		if ok := strings.HasPrefix(line, prefix); ok {
+			ip := line[len(prefix)+1 : len(line)-2]
+			return netip.ParseAddr(ip)
+		}
+	}
+	return netip.Addr{}, fmt.Errorf("Error getting IP address")
+}
+
+func (d *Device) Socket(domain int, stype int, protocol int) (int, error) {
+
+	switch domain {
+	case netdev.AF_INET:
+	default:
+		return -1, netdev.ErrFamilyNotSupported
+	}
+
+	switch {
+	case protocol == netdev.IPPROTO_TCP && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_TLS && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_UDP && stype == netdev.SOCK_DGRAM:
+	default:
+		return -1, netdev.ErrProtocolNotSupported
+	}
+
+	// Only supporting single connection mode, so only one socket at a time
+	if d.socket.inUse {
+		return -1, netdev.ErrNoMoreSockets
+	}
+	d.socket.inUse = true
+	d.socket.protocol = protocol
+
+	return 0, nil
+}
+
+func (d *Device) Bind(sockfd int, ip netip.AddrPort) error {
+	d.socket.laddr = ip
+	return nil
+}
+
+func (d *Device) Connect(sockfd int, host string, ip netip.AddrPort) error {
+	var err error
+	var addr = ip.Addr().String()
+	var rport = strconv.Itoa(int(ip.Port()))
+	var lport = strconv.Itoa(int(d.socket.laddr.Port()))
+
+	switch d.socket.protocol {
+	case netdev.IPPROTO_TCP:
+		err = d.ConnectTCPSocket(addr, rport)
+	case netdev.IPPROTO_UDP:
+		err = d.ConnectUDPSocket(addr, rport, lport)
+	case netdev.IPPROTO_TLS:
+		err = d.ConnectSSLSocket(host, rport)
+	}
+
+	if err != nil {
+		if host == "" {
+			return fmt.Errorf("Connect to %s timed out", ip)
+		} else {
+			return fmt.Errorf("Connect to %s:%d timed out", host, ip.Port())
+		}
+	}
+
+	return nil
+}
+
+func (d *Device) Listen(sockfd int, backlog int) error {
+	switch d.socket.protocol {
+	case netdev.IPPROTO_UDP:
+	default:
+		return netdev.ErrProtocolNotSupported
+	}
+	return nil
+}
+
+func (d *Device) Accept(sockfd int) (int, netip.AddrPort, error) {
+	return -1, netip.AddrPort{}, netdev.ErrNotSupported
+}
+
+func (d *Device) sendChunk(sockfd int, buf []byte, deadline time.Time) (int, error) {
+	// Check if we've timed out
+	if !deadline.IsZero() {
+		if time.Now().After(deadline) {
+			return -1, netdev.ErrTimeout
+		}
+	}
+	err := d.StartSocketSend(len(buf))
+	if err != nil {
+		return -1, err
+	}
+	n, err := d.Write(buf)
+	if err != nil {
+		return -1, err
+	}
+	_, err = d.Response(1000)
+	if err != nil {
+		return -1, err
+	}
+	return n, err
+}
+
+func (d *Device) Send(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.mu.Lock()
+	defer d.mu.Unlock()
+
+	// Break large bufs into chunks so we don't overrun the hw queue
+
+	chunkSize := 1436
+	for i := 0; i < len(buf); i += chunkSize {
+		end := i + chunkSize
+		if end > len(buf) {
+			end = len(buf)
+		}
+		_, err := d.sendChunk(sockfd, buf[i:end], deadline)
+		if err != nil {
+			return -1, err
+		}
+	}
+
+	return len(buf), nil
+}
+
+func (d *Device) Recv(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.mu.Lock()
+	defer d.mu.Unlock()
+
+	var length = len(buf)
+
+	// Limit length read size to chunk large read requests
+	if length > 1436 {
+		length = 1436
+	}
+
+	for {
+		// Check if we've timed out
+		if !deadline.IsZero() {
+			if time.Now().After(deadline) {
+				return -1, netdev.ErrTimeout
+			}
+		}
+
+		n, err := d.ReadSocket(buf[:length])
+		if err != nil {
+			return -1, err
+		}
+		if n == 0 {
+			d.mu.Unlock()
+			time.Sleep(100 * time.Millisecond)
+			d.mu.Lock()
+			continue
+		}
+
+		return n, nil
+	}
+}
+
+func (d *Device) Close(sockfd int) error {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+
+	d.socket.inUse = false
+	return d.DisconnectSocket()
+}
+
+func (d *Device) SetSockOpt(sockfd int, level int, opt int, value interface{}) error {
+	return netdev.ErrNotSupported
 }
 
 // Connected checks if there is communication with the ESP8266/ESP32.
@@ -57,7 +318,7 @@ func (d *Device) Connected() bool {
 	d.Execute(Test)
 
 	// handle response here, should include "OK"
-	_, err := d.Response(100)
+	_, err := d.Response(1000)
 	if err != nil {
 		return false
 	}
@@ -66,12 +327,12 @@ func (d *Device) Connected() bool {
 
 // Write raw bytes to the UART.
 func (d *Device) Write(b []byte) (n int, err error) {
-	return d.bus.Write(b)
+	return d.uart.Write(b)
 }
 
 // Read raw bytes from the UART.
 func (d *Device) Read(b []byte) (n int, err error) {
-	return d.bus.Read(b)
+	return d.uart.Read(b)
 }
 
 // how long in milliseconds to pause after sending AT commands
@@ -100,9 +361,10 @@ func (d Device) Set(cmd, params string) error {
 // Version returns the ESP8266/ESP32 firmware version info.
 func (d Device) Version() []byte {
 	d.Execute(Version)
-	r, err := d.Response(100)
+	r, err := d.Response(2000)
 	if err != nil {
-		return []byte("unknown")
+		//return []byte("unknown")
+		return []byte(err.Error())
 	}
 	return r
 }
@@ -132,16 +394,16 @@ func (d *Device) ReadSocket(b []byte) (n int, err error) {
 	d.Response(300)
 
 	count := len(b)
-	if len(b) >= len(d.socketdata) {
+	if len(b) >= len(d.data) {
 		// copy it all, then clear socket data
-		count = len(d.socketdata)
-		copy(b, d.socketdata[:count])
-		d.socketdata = d.socketdata[:0]
+		count = len(d.data)
+		copy(b, d.data[:count])
+		d.data = d.data[:0]
 	} else {
 		// copy all we can, then keep the remaining socket data around
-		copy(b, d.socketdata[:count])
-		copy(d.socketdata, d.socketdata[count:])
-		d.socketdata = d.socketdata[:len(d.socketdata)-count]
+		copy(b, d.data[:count])
+		copy(d.data, d.data[count:])
+		d.data = d.data[:len(d.data)-count]
 	}
 
 	return count, nil
@@ -157,11 +419,11 @@ func (d *Device) Response(timeout int) ([]byte, error) {
 	retries := timeout / pause
 
 	for {
-		size = d.bus.Buffered()
+		size = d.uart.Buffered()
 
 		if size > 0 {
 			end += size
-			d.bus.Read(d.response[start:end])
+			d.uart.Read(d.response[start:end])
 
 			// if "+IPD" then read socket data
 			if strings.Contains(string(d.response[:end]), "+IPD") {
@@ -204,18 +466,18 @@ func (d *Device) parseIPD(end int) error {
 	val := string(d.response[s+5 : e])
 
 	// TODO: verify count
-	_, err := strconv.Atoi(val)
+	v, err := strconv.Atoi(val)
 	if err != nil {
 		// not expected data here. what to do?
 		return err
 	}
 
 	// load up the socket data
-	d.socketdata = append(d.socketdata, d.response[e+1:end]...)
+	d.data = append(d.data, d.response[e+1:e+1+v]...)
 	return nil
 }
 
 // IsSocketDataAvailable returns of there is socket data available
 func (d *Device) IsSocketDataAvailable() bool {
-	return len(d.socketdata) > 0 || d.bus.Buffered() > 0
+	return len(d.data) > 0 || d.uart.Buffered() > 0
 }

espat/tcp.go

@@ -51,7 +51,7 @@ func (d *Device) ConnectTCPSocket(addr, port string) error {
 // ConnectUDPSocket creates a new UDP connection for the ESP8266/ESP32.
 func (d *Device) ConnectUDPSocket(addr, sendport, listenport string) error {
 	protocol := "UDP"
-	val := "\"" + protocol + "\",\"" + addr + "\"," + sendport + "," + listenport + ",2"
+	val := "\"" + protocol + "\",\"" + addr + "\"," + sendport + "," + listenport + ",0"
 	err := d.Set(TCPConnect, val)
 	if err != nil {
 		return err

espat/wifi.go

@@ -44,10 +44,7 @@ func (d *Device) ConnectToAP(ssid, pwd string, ws int) error {
 	d.Set(ConnectAP, val)
 
 	_, err := d.Response(ws * 1000)
-	if err != nil {
-		return err
-	}
-	return nil
+	return err
 }
 
 // DisconnectFromAP disconnects the ESP8266/ESP32 from the current access point.

examples/adafruit4650/main.go

@@ -0,0 +1,42 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/adafruit4650"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/freemono"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	dev := adafruit4650.New(machine.I2C0)
+
+	err := dev.Configure()
+	if err != nil {
+		panic(err)
+	}
+
+	drawPlus(&dev)
+	drawHelloWorld(&dev)
+
+	err = dev.Display()
+	if err != nil {
+		panic(err)
+	}
+}
+
+func drawPlus(d drivers.Displayer) {
+	for i := int16(0); i < 128; i++ {
+		d.SetPixel(i, 32, color.RGBA{R: 1})
+	}
+	for i := int16(0); i < 64; i++ {
+		d.SetPixel(64, i, color.RGBA{R: 1})
+	}
+}
+
+func drawHelloWorld(d drivers.Displayer) {
+	tinyfont.WriteLine(d, &freemono.Regular9pt7b, 0, 32, "Hello World!", color.RGBA{R: 0xff, G: 0xff, B: 0xff, A: 0xff})
+}

examples/as560x/main.go

@@ -0,0 +1,66 @@
+package main
+
+import (
+	"machine"
+	"machine/usb/hid/mouse"
+	"math"
+	"time"
+
+	"tinygo.org/x/drivers/as560x"
+)
+
+func main() {
+	// Let's use the AS5600 to make the world's most useless mouse with just a single X-axis & no buttons (!)
+	machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: machine.TWI_FREQ_400KHZ,
+		SDA:       machine.GPIO4,
+		SCL:       machine.GPIO5,
+	})
+	as5600 := as560x.NewAS5600(machine.I2C0)
+	as5600.Configure(as560x.Config{})
+	mouse := mouse.New()
+
+	lastAngle := -1
+	for {
+		time.Sleep(time.Millisecond * 10)
+		// Get the magnet status of the AS5600
+		magnetDetected, magnetStrength, err := as5600.MagnetStatus()
+		if err != nil {
+			continue
+		}
+		// Get the raw angle from the AS5600
+		angle, _, err := as5600.RawAngle(as560x.ANGLE_NATIVE)
+		if err != nil {
+			continue
+		}
+		str := ""
+		if !magnetDetected {
+			str += "NOT "
+		}
+		str += "detected. Strength is "
+		switch magnetStrength {
+		case as560x.MagnetTooWeak:
+			str += "too weak"
+		case as560x.MagnetTooStrong:
+			str += "too strong"
+		default:
+			str += "ok"
+		}
+		println("Raw angle:", angle, "Magnet was", str)
+		if lastAngle != -1 {
+			diff := int(angle) - lastAngle
+			// correct the zero crossover glitch
+			if diff < -0xc00 {
+				diff += 0xfff
+			} else if diff > 0xc00 {
+				diff -= 0xfff
+			}
+			// debounce the noise (could use the sensor's filters/hysteresis instead?)
+			if math.Abs(float64(diff)) > 2 {
+				// move the mouse x-axis in response to the AS5600
+				mouse.Move(diff, 0)
+			}
+		}
+		lastAngle = int(angle)
+	}
+}

examples/bma42x/main.go

@@ -0,0 +1,54 @@
+package main
+
+// Smoke test for the BMA421/BMA425 sensors.
+// Warning: this code has _not been tested_. It's only here as a smoke test.
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/bma42x"
+)
+
+func main() {
+	time.Sleep(5 * time.Second)
+
+	i2cBus := machine.I2C1
+	i2cBus.Configure(machine.I2CConfig{
+		Frequency: 400 * machine.KHz,
+		SDA:       machine.SDA_PIN,
+		SCL:       machine.SCL_PIN,
+	})
+
+	sensor := bma42x.NewI2C(i2cBus, bma42x.Address)
+	err := sensor.Configure(bma42x.Config{
+		Device:   bma42x.DeviceBMA421 | bma42x.DeviceBMA425,
+		Features: bma42x.FeatureStepCounting,
+	})
+	if err != nil {
+		println("could not configure BMA421/BMA425:", err)
+		return
+	}
+
+	if !sensor.Connected() {
+		println("BMA42x not connected")
+		return
+	}
+
+	for {
+		time.Sleep(time.Second)
+
+		err := sensor.Update(drivers.Acceleration | drivers.Temperature)
+		if err != nil {
+			println("Error reading sensor", err)
+			continue
+		}
+
+		fmt.Printf("Temperature: %.2f °C\n", float32(sensor.Temperature())/1000)
+
+		accelX, accelY, accelZ := sensor.Acceleration()
+		fmt.Printf("Acceleration: %.2fg %.2fg %.2fg\n", float32(accelX)/1e6, float32(accelY)/1e6, float32(accelZ)/1e6)
+	}
+}

examples/bmp180/main.go

@@ -27,6 +27,9 @@ func main() {
 		pressure, _ := sensor.ReadPressure()
 		println("Pressure", float32(pressure)/100000, "hPa")
 
+		altitude, _ := sensor.ReadAltitude()
+		println("Altitude", altitude, "meters")
+
 		time.Sleep(2 * time.Second)
 	}
 }

examples/delay/delay.go

@@ -0,0 +1,17 @@
+package main
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers/delay"
+)
+
+func main() {
+	time.Sleep(time.Second) // wait for a serial console
+	start := time.Now()
+	for i := 0; i < 2000; i++ {
+		delay.Sleep(50 * time.Microsecond)
+	}
+	duration := time.Since(start)
+	println("sleep of 2000*50µs (100ms) took:", duration.String())
+}

examples/ds18b20/main.go

@@ -0,0 +1,58 @@
+package main
+
+import (
+	"encoding/hex"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/onewire"
+
+	"tinygo.org/x/drivers/ds18b20"
+)
+
+func main() {
+	// Define pin for DS18B20
+	pin := machine.D2
+
+	ow := onewire.New(pin)
+	romIDs, err := ow.Search(onewire.SEARCH_ROM)
+	if err != nil {
+		println(err)
+	}
+	sensor := ds18b20.New(ow)
+
+	for {
+		time.Sleep(3 * time.Second)
+
+		println()
+		println("Device:", machine.Device)
+
+		println()
+		println("Request Temperature.")
+		for _, romid := range romIDs {
+			println("Sensor RomID: ", hex.EncodeToString(romid))
+			sensor.RequestTemperature(romid)
+		}
+
+		// wait 750ms or more for DS18B20 convert T
+		time.Sleep(1 * time.Second)
+
+		println()
+		println("Read Temperature")
+		for _, romid := range romIDs {
+			raw, err := sensor.ReadTemperatureRaw(romid)
+			if err != nil {
+				println(err)
+			}
+			println()
+			println("Sensor RomID: ", hex.EncodeToString(romid))
+			println("Temperature Raw value: ", hex.EncodeToString(raw))
+
+			t, err := sensor.ReadTemperature(romid)
+			if err != nil {
+				println(err)
+			}
+			println("Temperature in celsius milli degrees (°C/1000): ", t)
+		}
+	}
+}

examples/ds3231/main.go

@@ -1,4 +1,4 @@
-// Connects to an MAG3110 I2C magnetometer.
+// Connects to an DS3231 I2C Real Time Clock (RTC).
 package main
 
 import (

examples/encoders/quadrature-interrupt/main.go

@@ -0,0 +1,28 @@
+//go:build macropad_rp2040
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/encoders"
+)
+
+var (
+	enc = encoders.NewQuadratureViaInterrupt(machine.ROT_A, machine.ROT_B)
+)
+
+func main() {
+
+	enc.Configure(encoders.QuadratureConfig{
+		Precision: 4,
+	})
+
+	for oldValue := 0; ; {
+		if newValue := enc.Position(); newValue != oldValue {
+			println("value: ", newValue)
+			oldValue = newValue
+		}
+	}
+
+}

examples/ens160/main.go

@@ -0,0 +1,56 @@
+// This example demonstrates ENS160 usage.
+//
+// Wiring:
+// - VCC to 3.3V, GND to ground
+// - SDA to board SDA, SCL to board SCL
+
+package main
+
+import (
+	"time"
+
+	"machine"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/ens160"
+)
+
+func main() {
+	err := machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: 400 * machine.KHz,
+	})
+	if err != nil {
+		println("Failed to configure I2C:", err)
+	}
+
+	dev := ens160.New(machine.I2C0, ens160.DefaultAddress)
+
+	connected := dev.Connected()
+	if !connected {
+		println("ENS160 not detected")
+		return
+	}
+	println("ENS160 detected")
+
+	if err := dev.Configure(); err != nil {
+		println("Failed to configure ENS160:", err)
+	}
+
+	for {
+		err := dev.Update(drivers.Concentration)
+		if err != nil {
+			println("Error reading ENS160: %v\n", err)
+			time.Sleep(5 * time.Second)
+			continue
+		}
+
+		println(
+			"AQI:", dev.AQI(),
+			"TVOC:", dev.TVOC(),
+			"eCO2:", dev.ECO2(),
+			"Validity:", dev.ValidityString(),
+		)
+
+		time.Sleep(2 * time.Second)
+	}
+}

examples/espat/espconsole/main.go

@@ -1,145 +0,0 @@
-// This is a console to a ESP8266/ESP32 running on the device UART1.
-// Allows you to type AT commands from your computer via the microcontroller.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> INTERNET
-//
-// More information on the Espressif AT command set at:
-// https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
-package main
-
-import (
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-)
-
-// change actAsAP to true to act as an access point instead of connecting to one.
-const actAsAP = false
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// these are the default pins for the Arduino Nano33 IoT.
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	uart = machine.UART1
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	console = machine.Serial
-
-	adaptor *espat.Device
-)
-
-func main() {
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-
-	// Init esp8266
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	println("Type an AT command then press enter:")
-	prompt()
-
-	input := make([]byte, 64)
-	i := 0
-	for {
-		if console.Buffered() > 0 {
-			data, _ := console.ReadByte()
-
-			switch data {
-			case 13:
-				// return key
-				console.Write([]byte("\r\n"))
-
-				// send command to ESP8266
-				input[i] = byte('\r')
-				input[i+1] = byte('\n')
-				adaptor.Write(input[:i+2])
-
-				// display response
-				r, _ := adaptor.Response(500)
-				console.Write(r)
-
-				// prompt
-				prompt()
-
-				i = 0
-				continue
-			default:
-				// just echo the character
-				console.WriteByte(data)
-				input[i] = data
-				i++
-			}
-		}
-		time.Sleep(10 * time.Millisecond)
-	}
-}
-
-func prompt() {
-	print("ESPAT>")
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-// provide access point
-func provideAP() {
-	println("Starting wifi network as access point '" + ssid + "'...")
-	adaptor.SetWifiMode(espat.WifiModeAP)
-	adaptor.SetAPConfig(ssid, pass, 7, espat.WifiAPSecurityWPA2_PSK)
-	println("Ready.")
-	ip, _ := adaptor.GetAPIP()
-	println(ip)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/espat/esphub/main.go

@@ -1,131 +0,0 @@
-// This is a sensor hub that uses a ESP8266/ESP32 running on the device UART1.
-// It creates a UDP "server" you can use to get info to/from your computer via the microcontroller.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> INTERNET
-package main
-
-import (
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/net"
-)
-
-// change actAsAP to true to act as an access point instead of connecting to one.
-const actAsAP = false
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// these are the default pins for the Arduino Nano33 IoT.
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	uart = machine.UART1
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	adaptor *espat.Device
-)
-
-func main() {
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-
-	// Init esp8266
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	readyled := machine.LED
-	readyled.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	readyled.High()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	// now make UDP connection
-	laddr := &net.UDPAddr{Port: 2222}
-	println("Loading UDP listener...")
-	conn, _ := net.ListenUDP("UDP", laddr)
-
-	println("Waiting for data...")
-	data := make([]byte, 50)
-	blink := true
-	for {
-		n, _ := conn.Read(data)
-		if n > 0 {
-			println(string(data[:n]))
-			conn.Write([]byte("hello back\r\n"))
-		}
-		blink = !blink
-		if blink {
-			readyled.High()
-		} else {
-			readyled.Low()
-		}
-		time.Sleep(500 * time.Millisecond)
-	}
-
-	// Right now this code is never reached. Need a way to trigger it...
-	println("Disconnecting UDP...")
-	conn.Close()
-	println("Done.")
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-// provide access point
-func provideAP() {
-	println("Starting wifi network as access point '" + ssid + "'...")
-	adaptor.SetWifiMode(espat.WifiModeAP)
-	adaptor.SetAPConfig(ssid, pass, 7, espat.WifiAPSecurityWPA2_PSK)
-	println("Ready.")
-	ip, _ := adaptor.GetAPIP()
-	println(ip)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/espat/espstation/main.go

@@ -1,110 +0,0 @@
-// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
-// It creates a UDP connection you can use to get info to/from your computer via the microcontroller.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266
-package main
-
-import (
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/net"
-)
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// IP address of the listener aka "hub". Replace with your own info.
-const hubIP = "0.0.0.0"
-
-// these are the default pins for the Arduino Nano33 IoT.
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	uart = machine.UART1
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	adaptor *espat.Device
-)
-
-func main() {
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-
-	// Init esp8266/esp32
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	// now make UDP connection
-	ip := net.ParseIP(hubIP)
-	raddr := &net.UDPAddr{IP: ip, Port: 2222}
-	laddr := &net.UDPAddr{Port: 2222}
-
-	println("Dialing UDP connection...")
-	conn, _ := net.DialUDP("udp", laddr, raddr)
-
-	for {
-		// send data
-		println("Sending data...")
-		conn.Write([]byte("hello\r\n"))
-
-		time.Sleep(1000 * time.Millisecond)
-	}
-
-	// Right now this code is never reached. Need a way to trigger it...
-	println("Disconnecting UDP...")
-	conn.Close()
-	println("Done.")
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/espat/mqttclient/main.go

@@ -1,144 +0,0 @@
-// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
-// It creates an MQTT connection that publishes a message every second
-// to an MQTT broker.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> Internet <--> MQTT broker.
-//
-// You must install the Paho MQTT package to build this program:
-//
-//	go get -u github.com/eclipse/paho.mqtt.golang
-package main
-
-import (
-	"machine"
-	"math/rand"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/net/mqtt"
-)
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// IP address of the MQTT broker to use. Replace with your own info.
-const server = "tcp://test.mosquitto.org:1883"
-
-//const server = "ssl://test.mosquitto.org:8883"
-
-// these are the default pins for the Arduino Nano33 IoT.
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	uart = machine.UART2
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	console = machine.Serial
-
-	adaptor *espat.Device
-	topic   = "tinygo"
-)
-
-func main() {
-	time.Sleep(3000 * time.Millisecond)
-
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-	rand.Seed(time.Now().UnixNano())
-
-	// Init esp8266/esp32
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	opts := mqtt.NewClientOptions()
-	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
-
-	println("Connecting to MQTT broker at", server)
-	cl := mqtt.NewClient(opts)
-	if token := cl.Connect(); token.Wait() && token.Error() != nil {
-		failMessage(token.Error().Error())
-	}
-
-	for {
-		println("Publishing MQTT message...")
-		data := []byte("{\"e\":[{ \"n\":\"hello\", \"v\":101 }]}")
-		token := cl.Publish(topic, 0, false, data)
-		token.Wait()
-		if token.Error() != nil {
-			println(token.Error().Error())
-		}
-
-		time.Sleep(1000 * time.Millisecond)
-	}
-
-	// Right now this code is never reached. Need a way to trigger it...
-	println("Disconnecting MQTT...")
-	cl.Disconnect(100)
-
-	println("Done.")
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-// Returns an int >= min, < max
-func randomInt(min, max int) int {
-	return min + rand.Intn(max-min)
-}
-
-// Generate a random string of A-Z chars with len = l
-func randomString(len int) string {
-	bytes := make([]byte, len)
-	for i := 0; i < len; i++ {
-		bytes[i] = byte(randomInt(65, 90))
-	}
-	return string(bytes)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/espat/mqttsub/main.go

@@ -1,165 +0,0 @@
-// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
-// It creates an MQTT connection that publishes a message every second
-// to an MQTT broker.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> Internet <--> MQTT broker.
-//
-// You must also install the Paho MQTT package to build this program:
-//
-//	go get -u github.com/eclipse/paho.mqtt.golang
-package main
-
-import (
-	"fmt"
-	"machine"
-	"math/rand"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/net/mqtt"
-)
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// IP address of the MQTT broker to use. Replace with your own info.
-//const server = "tcp://test.mosquitto.org:1883"
-
-const server = "ssl://test.mosquitto.org:8883"
-
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	// these are defaults for the Arduino Nano33 IoT.
-	uart = machine.UART1
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	console = machine.Serial
-
-	adaptor *espat.Device
-	cl      mqtt.Client
-	topicTx = "tinygo/tx"
-	topicRx = "tinygo/rx"
-)
-
-func subHandler(client mqtt.Client, msg mqtt.Message) {
-	fmt.Printf("[%s]  ", msg.Topic())
-	fmt.Printf("%s\r\n", msg.Payload())
-}
-
-func main() {
-	time.Sleep(3000 * time.Millisecond)
-
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-	rand.Seed(time.Now().UnixNano())
-
-	// Init esp8266/esp32
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	opts := mqtt.NewClientOptions()
-	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
-
-	println("Connecting to MQTT broker at", server)
-	cl = mqtt.NewClient(opts)
-	if token := cl.Connect(); token.Wait() && token.Error() != nil {
-		failMessage(token.Error().Error())
-	}
-
-	// subscribe
-	token := cl.Subscribe(topicRx, 0, subHandler)
-	token.Wait()
-	if token.Error() != nil {
-		failMessage(token.Error().Error())
-	}
-
-	go publishing()
-
-	select {}
-
-	// Right now this code is never reached. Need a way to trigger it...
-	println("Disconnecting MQTT...")
-	cl.Disconnect(100)
-
-	println("Done.")
-}
-
-func publishing() {
-	for {
-		println("Publishing MQTT message...")
-		data := []byte("{\"e\":[{ \"n\":\"hello\", \"v\":101 }]}")
-		token := cl.Publish(topicTx, 0, false, data)
-		token.Wait()
-		if token.Error() != nil {
-			println(token.Error().Error())
-		}
-
-		time.Sleep(1000 * time.Millisecond)
-	}
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-// Returns an int >= min, < max
-func randomInt(min, max int) int {
-	return min + rand.Intn(max-min)
-}
-
-// Generate a random string of A-Z chars with len = l
-func randomString(len int) string {
-	bytes := make([]byte, len)
-	for i := 0; i < len; i++ {
-		bytes[i] = byte(randomInt(65, 90))
-	}
-	return string(bytes)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/espat/tcpclient/main.go

@@ -1,113 +0,0 @@
-// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
-// It creates a UDP connection you can use to get info to/from your computer via the microcontroller.
-//
-// In other words:
-// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266
-package main
-
-import (
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/net"
-)
-
-var (
-	// access point info
-	ssid string
-	pass string
-)
-
-// IP address of the server aka "hub". Replace with your own info.
-const serverIP = "0.0.0.0"
-
-// these are the default pins for the Arduino Nano33 IoT.
-// change these to connect to a different UART or pins for the ESP8266/ESP32
-var (
-	uart = machine.UART1
-	tx   = machine.PA22
-	rx   = machine.PA23
-
-	adaptor *espat.Device
-)
-
-func main() {
-	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
-
-	// Init esp8266/esp32
-	adaptor = espat.New(uart)
-	adaptor.Configure()
-
-	// first check if connected
-	if connectToESP() {
-		println("Connected to wifi adaptor.")
-		adaptor.Echo(false)
-
-		connectToAP()
-	} else {
-		println("")
-		failMessage("Unable to connect to wifi adaptor.")
-		return
-	}
-
-	// now make TCP connection
-	ip := net.ParseIP(serverIP)
-	raddr := &net.TCPAddr{IP: ip, Port: 8080}
-	laddr := &net.TCPAddr{Port: 8080}
-
-	println("Dialing TCP connection...")
-	conn, err := net.DialTCP("tcp", laddr, raddr)
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	for {
-		// send data
-		println("Sending data...")
-		conn.Write([]byte("hello\r\n"))
-
-		time.Sleep(1000 * time.Millisecond)
-	}
-
-	// Right now this code is never reached. Need a way to trigger it...
-	println("Disconnecting TCP...")
-	conn.Close()
-	println("Done.")
-}
-
-// connect to ESP8266/ESP32
-func connectToESP() bool {
-	for i := 0; i < 5; i++ {
-		println("Connecting to wifi adaptor...")
-		if adaptor.Connected() {
-			return true
-		}
-		time.Sleep(1 * time.Second)
-	}
-	return false
-}
-
-// connect to access point
-func connectToAP() {
-	println("Connecting to wifi network '" + ssid + "'")
-
-	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
-		failMessage(err.Error())
-	}
-
-	println("Connected.")
-	ip, err := adaptor.GetClientIP()
-	if err != nil {
-		failMessage(err.Error())
-	}
-
-	println(ip)
-}
-
-func failMessage(msg string) {
-	for {
-		println(msg)
-		time.Sleep(1 * time.Second)
-	}
-}

examples/flash/console/spi/main.go

@@ -10,7 +10,7 @@ import (
 func main() {
 	console_example.RunFor(
 		flash.NewSPI(
-			&machine.SPI1,
+			machine.SPI1,
 			machine.SPI1_SDO_PIN,
 			machine.SPI1_SDI_PIN,
 			machine.SPI1_SCK_PIN,

examples/ft6336/basic/m5stack_core2.go

@@ -1,5 +1,4 @@
 //go:build m5stack_core2
-// +build m5stack_core2
 
 package main
 

examples/ft6336/touchpaint/m5stack_core2.go

@@ -1,5 +1,4 @@
 //go:build m5stack_core2
-// +build m5stack_core2
 
 package main
 

examples/gps/i2c/main.go

@@ -10,7 +10,7 @@ import (
 func main() {
 	println("GPS I2C Example")
 	machine.I2C0.Configure(machine.I2CConfig{})
-	ublox := gps.NewI2C(machine.I2C0)
+	ublox := gps.NewI2CWithAddress(machine.I2C0, gps.UBLOX_I2C_ADDRESS)
 	parser := gps.NewParser()
 	var fix gps.Fix
 	for {

examples/honeyhsc/example.go

@@ -0,0 +1,49 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/honeyhsc"
+)
+
+// Data taken from https://github.com/rodan/honeywell_hsc_ssc_i2c/blob/master/hsc_ssc_i2c.cpp
+// these defaults are valid for the HSCMRNN030PA2A3 chip
+const (
+	i2cAddress = 0x28
+	// 10%
+	outputMinimum = 0x666
+	// 90% of 2^14 - 1
+	outputMax = 0x399A
+	// min is 0 for sensors that give absolute values
+	pressureMin = 0
+	// 30psi (and we want results in millipascals)
+	// pressureMax = 206842.7
+	pressureMax = 206843 * 1000
+)
+
+func main() {
+	bus := machine.I2C0
+	err := bus.Configure(machine.I2CConfig{
+		Frequency: 400_000, // 100kHz minimum and 400kHz I2C maximum clock. 50 to 800 for SPI.
+		SDA:       machine.I2C0_SDA_PIN,
+		SCL:       machine.I2C0_SCL_PIN,
+	})
+	if err != nil {
+		panic(err.Error())
+	}
+	sensor := honeyhsc.NewDevI2C(bus, i2cAddress, outputMinimum, outputMax, pressureMin, pressureMax)
+	for {
+		time.Sleep(time.Second)
+		const measuremask = drivers.Pressure | drivers.Temperature
+		err := sensor.Update(measuremask)
+		if err != nil {
+			println("error updating measurements:", err.Error())
+			continue
+		}
+		P := sensor.Pressure()
+		T := sensor.Temperature()
+		println("pressure:", P, "temperature:", T)
+	}
+}

examples/ili9341/initdisplay/atsamd21.go

@@ -1,5 +1,4 @@
 //go:build atsamd21
-// +build atsamd21
 
 package initdisplay
 

examples/ili9341/initdisplay/feather.go

@@ -1,5 +1,4 @@
 //go:build feather_m0 || feather_m4 || feather_m4_can || feather_nrf52840 || feather_nrf52840_sense || feather_stm32f405 || feather_rp2040
-// +build feather_m0 feather_m4 feather_m4_can feather_nrf52840 feather_nrf52840_sense feather_stm32f405 feather_rp2040
 
 package initdisplay
 

examples/ili9341/initdisplay/m5stack.go

@@ -1,5 +1,4 @@
 //go:build m5stack
-// +build m5stack
 
 package initdisplay
 

examples/ili9341/initdisplay/m5stack_core2.go

@@ -1,5 +1,4 @@
 //go:build m5stack_core2
-// +build m5stack_core2
 
 package initdisplay
 

examples/ili9341/initdisplay/pyportal.go

@@ -1,5 +1,4 @@
 //go:build pyportal
-// +build pyportal
 
 package initdisplay
 

examples/ili9341/initdisplay/wioterminal.go

@@ -1,5 +1,4 @@
 //go:build wioterminal
-// +build wioterminal
 
 package initdisplay
 

examples/ili9341/pyportal_boing/main.go

@@ -8,15 +8,16 @@ import (
 	"tinygo.org/x/drivers/examples/ili9341/initdisplay"
 	"tinygo.org/x/drivers/examples/ili9341/pyportal_boing/graphics"
 	"tinygo.org/x/drivers/ili9341"
+	"tinygo.org/x/drivers/pixel"
 )
 
 const (
-	BGCOLOR    = 0xAD75
-	GRIDCOLOR  = 0xA815
-	BGSHADOW   = 0x5285
-	GRIDSHADOW = 0x600C
-	RED        = 0xF800
-	WHITE      = 0xFFFF
+	BGCOLOR    = pixel.RGB565BE(0x75AD)
+	GRIDCOLOR  = pixel.RGB565BE(0x15A8)
+	BGSHADOW   = pixel.RGB565BE(0x8552)
+	GRIDSHADOW = pixel.RGB565BE(0x0C60)
+	RED        = pixel.RGB565BE(0x00F8)
+	WHITE      = pixel.RGB565BE(0xFFFF)
 
 	YBOTTOM = 123  // Ball Y coord at bottom
 	YBOUNCE = -3.5 // Upward velocity on ball bounce
@@ -25,7 +26,7 @@ const (
 )
 
 var (
-	frameBuffer = [(graphics.BALLHEIGHT + 8) * (graphics.BALLWIDTH + 8) * 2]uint8{}
+	frameBuffer = pixel.NewImage[pixel.RGB565BE](graphics.BALLWIDTH+8, graphics.BALLHEIGHT+8)
 
 	startTime int64
 	frame     int64
@@ -41,7 +42,7 @@ var (
 	balloldy  float32
 
 	// Color table for ball rotation effect
-	palette [16]uint16
+	palette [16]pixel.RGB565BE
 )
 
 var (
@@ -108,6 +109,7 @@ func main() {
 
 		width = maxx - minx + 1
 		height = maxy - miny + 1
+		buffer := frameBuffer.Rescale(int(width), int(height))
 
 		// Ball animation frame # is incremented opposite the ball's X velocity
 		ballframe -= ballvx * 0.5
@@ -128,7 +130,7 @@ func main() {
 		}
 
 		// Only the changed rectangle is drawn into the 'renderbuf' array...
-		var c uint16              //, *destPtr;
+		var c pixel.RGB565BE      //, *destPtr;
 		bx := minx - int16(ballx) // X relative to ball bitmap (can be negative)
 		by := miny - int16(bally) // Y relative to ball bitmap (can be negative)
 		bgx := minx               // X relative to background bitmap (>= 0)
@@ -149,19 +151,20 @@ func main() {
 					(by >= 0) && (by < graphics.BALLHEIGHT) { // inside the ball bitmap area?
 					// Yes, do ball compositing math...
 					p = graphics.Ball[int(by*(graphics.BALLWIDTH/2))+int(bx1/2)] // Get packed value (2 pixels)
+					var nibble uint8
 					if (bx1 & 1) != 0 {
-						c = uint16(p & 0xF)
+						nibble = p & 0xF
 					} else {
-						c = uint16(p >> 4)
+						nibble = p >> 4
 					} // Unpack high or low nybble
-					if c == 0 { // Outside ball - just draw grid
+					if nibble == 0 { // Outside ball - just draw grid
 						if graphics.Background[bgidx]&(0x80>>(bgx1&7)) != 0 {
 							c = GRIDCOLOR
 						} else {
 							c = BGCOLOR
 						}
-					} else if c > 1 { // In ball area...
-						c = palette[c]
+					} else if nibble > 1 { // In ball area...
+						c = palette[nibble]
 					} else { // In shadow area...
 						if graphics.Background[bgidx]&(0x80>>(bgx1&7)) != 0 {
 							c = GRIDSHADOW
@@ -176,8 +179,7 @@ func main() {
 						c = BGCOLOR
 					}
 				}
-				frameBuffer[(y*int(width)+x)*2] = byte(c >> 8)
-				frameBuffer[(y*int(width)+x)*2+1] = byte(c)
+				buffer.Set(x, y, c)
 				bx1++ // Increment bitmap position counters (X axis)
 				bgx1++
 			}
@@ -188,7 +190,7 @@ func main() {
 			bgy++
 		}
 
-		display.DrawRGBBitmap8(minx, miny, frameBuffer[:width*height*2], width, height)
+		display.DrawBitmap(minx, miny, buffer)
 
 		// Show approximate frame rate
 		frame++
@@ -205,6 +207,7 @@ func DrawBackground() {
 	w, h := display.Size()
 	byteWidth := (w + 7) / 8 // Bitmap scanline pad = whole byte
 	var b uint8
+	buffer := frameBuffer.Rescale(int(w), 1)
 	for j := int16(0); j < h; j++ {
 		for k := int16(0); k < w; k++ {
 			if k&7 > 0 {
@@ -213,13 +216,11 @@ func DrawBackground() {
 				b = graphics.Background[j*byteWidth+k/8]
 			}
 			if b&0x80 == 0 {
-				frameBuffer[2*k] = byte(BGCOLOR >> 8)
-				frameBuffer[2*k+1] = byte(BGCOLOR & 0xFF)
+				buffer.Set(int(k), 0, BGCOLOR)
 			} else {
-				frameBuffer[2*k] = byte(GRIDCOLOR >> 8)
-				frameBuffer[2*k+1] = byte(GRIDCOLOR & 0xFF)
+				buffer.Set(int(k), 0, GRIDCOLOR)
 			}
 		}
-		display.DrawRGBBitmap8(0, j, frameBuffer[0:w*2], w, 1)
+		display.DrawBitmap(0, j, buffer)
 	}
 }

examples/ina219/main.go

@@ -0,0 +1,29 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/ina219"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	dev := ina219.New(machine.I2C0)
+	dev.Configure()
+
+	for {
+		busVoltage, shuntVoltage, current, power, err := dev.Measurements()
+		if err != nil {
+			println("Error reading measurements", err)
+		}
+
+		println("Bus Voltage:", busVoltage, "V")
+		println("Shunt Voltage:", shuntVoltage/100, "mV")
+		println("Current:", current, "mA")
+		println("Power:", power, "mW")
+
+		time.Sleep(10 * time.Millisecond)
+	}
+}

examples/lis3dh/main.go

@@ -14,9 +14,18 @@ func main() {
 	i2c.Configure(machine.I2CConfig{SCL: machine.SCL1_PIN, SDA: machine.SDA1_PIN})
 
 	accel := lis3dh.New(i2c)
-	accel.Address = lis3dh.Address1 // address on the Circuit Playground Express
-	accel.Configure()
-	accel.SetRange(lis3dh.RANGE_2_G)
+	err := accel.Configure(lis3dh.Config{
+		Address: lis3dh.Address1, // address on the Circuit Playground Express
+	})
+	for err != nil {
+		println("could not configure LIS3DH:", err)
+		time.Sleep(time.Second)
+	}
+	err = accel.SetRange(lis3dh.RANGE_2_G)
+	for err != nil {
+		println("could not set acceleration range:", err)
+		time.Sleep(time.Second)
+	}
 
 	println(accel.Connected())
 

examples/lora/lorawan/atcmd/README.md

@@ -0,0 +1,52 @@
+# AT-CMD implementation of at-lora command set
+
+This example implements the AT command set as used by Seeed in the LoRa-E5 series of boards, but in the form of a TinyGo program that provides a serial interface. 
+
+See https://files.seeedstudio.com/products/317990687/res/LoRa-E5%20AT%20Command%20Specification_V1.0%20.pdf for more information.
+
+```
+$ tinygo monitor
+Connected to /dev/ttyACM0. Press Ctrl-C to exit.
++AT: OK
++VER: 0.0.1 (sx127x v18)
+```
+
+# Building
+
+Run the following commands from the main `drivers` directory.
+
+## Simulator
+
+Builds/flashes atcmd console application with simulator instead of actual LoRa radio.
+
+```
+tinygo flash -target pico ./examples/lora/lorawan/atcmd/
+```
+
+## PyBadge with LoRa Featherwing for EU868 region
+
+Builds/flashes atcmd console application on PyBadge using LoRa Featherwing (RFM95/SX1276).
+
+```
+tinygo flash -target pybadge -tags featherwing -ldflags="-X main.reg=EU868" ./examples/lora/lorawan/atcmd/
+```
+
+## LoRa-E5 for US915 region
+
+Builds/flashes atcmd console application on Lora-E5 using onboard SX126x.
+
+```
+tinygo flash -target lorae5 -ldflags="-X main.reg=US915" ./examples/lora/lorawan/atcmd/
+```
+
+## Joining a Public Lorawan Network
+
+```
+AT+ID=DevEui,0101010101010101
+AT+ID=AppEui,0123012301230213
+AT+KEY=APPKEY,AEAEAEAEAEAEAEAAEAEAEAEAEAEAAEAE
+AT+LW=NET,ON  
+AT+JOIN
+```
+
+AT+LW=NET,(ON|OFF) command changes Lora Sync Word to connect on public network(ON) or private networks(OFF)

examples/lora/lorawan/atcmd/commands.go

@@ -0,0 +1,496 @@
+package main
+
+import (
+	"encoding/hex"
+	"strings"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora/lorawan"
+)
+
+// Use to test if connection to module is OK.
+func quicktest() {
+	writeCommandOutput("AT", "OK")
+}
+
+// Check firmware version.
+func version() {
+	writeCommandOutput("VER", common.CurrentVersion()+" ("+common.FirmwareVersion()+")")
+}
+
+// Use to check the ID of the LoRaWAN module, or change the ID.
+func id(args string) error {
+	cmd := "ID"
+
+	// look for comma in args
+	param, val, hasComma := strings.Cut(args, ",")
+	if hasComma {
+		// set
+		data := strings.Trim(val, "\"'")
+
+		// convert data from hex formatted string
+		data = strings.ReplaceAll(data, " ", "")
+		hexdata, err := hex.DecodeString(data)
+		if err != nil {
+			writeCommandOutput(cmd, err.Error())
+
+			return err
+		}
+
+		switch param {
+		case "DevAddr":
+			if err := session.SetDevAddr(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+		case "DevEui":
+			if err := otaa.SetDevEUI(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+		case "AppEui":
+			if err := otaa.SetAppEUI(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+		default:
+			return errInvalidCommand
+		}
+
+		return nil
+	}
+
+	// get
+	switch param {
+	case "DevAddr":
+		writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+	case "DevEui":
+		writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+	case "AppEui":
+		writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	default:
+		writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+		writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+		writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	}
+
+	return nil
+}
+
+// Use to reset the module. If module returns error, then reset function is invalid.
+func reset() error {
+	radio.Reset()
+
+	writeCommandOutput("RESET", "OK")
+	return nil
+}
+
+// Use to send string format frame which is no need to be confirmed by the server.
+func msg(data string) error {
+	cmd := "MSG"
+	writeCommandOutput(cmd, "Start")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send string format frame which must be confirmed by the server
+func cmsg(data string) error {
+	cmd := "CMSG"
+	writeCommandOutput(cmd, "Start")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	// TODO: confirmation
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format frame which is no need to be confirmed by the server
+func msghex(data string) error {
+	cmd := "MSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format frame which must be confirmed by the server.
+func cmsghex(data string) error {
+	cmd := "CMSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send string format LoRaWAN proprietary frames
+func pmsg(data string) error {
+	cmd := "PMSG"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format LoRaWAN proprietary frames.
+func pmsghex(data string) error {
+	cmd := "PMSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+// Set PORT number which will be used by MSG/CMSG/MSGHEX/CMSGHEX command to send
+// message, port number should range from 1 to 255. User should refer to LoRaWAN
+// specification to choose port.
+func port(p string) error {
+	cmd := "PMSG"
+	writeCommandOutput(cmd, p)
+
+	return nil
+}
+
+// Set ADR function of LoRaWAN module
+func adr(state string) error {
+	cmd := "ADR"
+	writeCommandOutput(cmd, state)
+
+	return nil
+}
+
+// Use LoRaWAN defined DRx to set datarate of LoRaWAN AT modem.
+func dr(rate string) error {
+	cmd := "DR"
+	writeCommandOutput(cmd, rate)
+
+	return nil
+}
+
+// Channel Configuration
+func ch(channel string) error {
+	cmd := "CH"
+	writeCommandOutput(cmd, channel)
+
+	return nil
+}
+
+// Set and Check Power
+func power(setting string) error {
+	cmd := "POWER"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+// Unconfirmed message repeats times.
+func rept(setting string) error {
+	cmd := "REPT"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+// Confirmed message retry times. Valid range 0~254,
+// if retry times is less than 2, only one message will
+// be sent. Random delay 3 - 10s between each retry
+// (band duty cycle limitation has the priority)
+func retry(setting string) error {
+	cmd := "RETRY"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func rxwin2(setting string) error {
+	cmd := "RXWIN2"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func rxwin1(setting string) error {
+	cmd := "RXWIN1"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func key(setting string) error {
+	cmd := "KEY"
+
+	// look for comma in args
+	param, val, hasComma := strings.Cut(setting, ",")
+	if hasComma {
+		// set
+		data := strings.Trim(val, "\"'")
+
+		// convert data from hex formatted string
+		data = strings.ReplaceAll(data, " ", "")
+		hexdata, err := hex.DecodeString(data)
+		if err != nil {
+			writeCommandOutput(cmd, err.Error())
+
+			return err
+		}
+
+		switch param {
+		case "APPKEY":
+			if err := otaa.SetAppKey(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "APPKEY, "+otaa.GetAppKey())
+		default:
+			return errInvalidCommand
+		}
+	}
+
+	// cannot get keys
+	return errInvalidCommand
+}
+
+func fdefault(setting string) error {
+	cmd := "FDEFAULT"
+	writeCommandOutput(cmd, "OK")
+
+	return nil
+}
+
+func mode(setting string) error {
+	cmd := "MODE"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func join(setting string) error {
+	// TODO: check that DevEUI, AppEUI, and AppKey have values
+
+	cmd := "JOIN"
+	writeCommandOutput(cmd, "Starting")
+	if err := lorawan.Join(otaa, session); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Network joined")
+	writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+	writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+	writeCommandOutput(cmd, "NetID, "+otaa.GetNetID())
+	writeCommandOutput(cmd, "NwkSKey, "+session.GetNwkSKey())
+	writeCommandOutput(cmd, "AppSKey, "+session.GetAppSKey())
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func beacon(setting string) error {
+	cmd := "BEACON"
+	writeCommandOutput(cmd, "Starting")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+func class(setting string) error {
+	cmd := "CLASS"
+	writeCommandOutput(cmd, "Starting")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+func delay(setting string) error {
+	cmd := "DELAY"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func lw(setting string) error {
+	cmd := "LW"
+
+	param, val, hasComma := strings.Cut(setting, ",")
+	if hasComma {
+		if param == "NET" {
+			if val == "ON" {
+				lorawan.SetPublicNetwork(true)
+			} else {
+				lorawan.SetPublicNetwork(false)
+			}
+		}
+	}
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func wdt(setting string) error {
+	cmd := "WDT"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func lowpower(setting string) error {
+	cmd := "LOWPOWER"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func vdd(setting string) error {
+	cmd := "VDD"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func temp(setting string) error {
+	cmd := "TEMP"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func rtc(setting string) error {
+	cmd := "RTC"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func eeprom(setting string) error {
+	cmd := "EEPROM"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func uartcmd(setting string) error {
+	cmd := "UART"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func test(setting string) error {
+	cmd := "TEST"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func log(setting string) error {
+	cmd := "LOG"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func send(data string) error {
+	cmd := "SEND"
+	writeCommandOutput(cmd, "Start")
+
+	// remove leading/trailing quotes
+	data = strings.Trim(data, "\"'")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func sendhex(data string) error {
+	cmd := "SENDHEX"
+	writeCommandOutput(cmd, "Start")
+
+	// remove leading/trailing quotes
+	data = strings.Trim(data, "\"'")
+
+	// convert data from hex formatted string
+	data = strings.ReplaceAll(data, " ", "")
+	payload, err := hex.DecodeString(data)
+	if err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	if err := radio.Tx(payload, defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func recv(setting string) error {
+	cmd := "RECV"
+
+	data, err := common.Lorarx()
+	if err != nil {
+		writeCommandOutput(cmd, "ERROR "+err.Error())
+		return err
+	}
+	writeCommandOutput(cmd, string(data))
+
+	return nil
+}
+
+func recvhex(setting string) error {
+	cmd := "RECVHEX"
+
+	data, err := common.Lorarx()
+	if err != nil {
+		writeCommandOutput(cmd, "ERROR "+err.Error())
+		return err
+	}
+	writeCommandOutput(cmd, string(data))
+
+	return nil
+}
+
+func crlf() {
+	uart.Write([]byte("\r\n"))
+}
+
+func writeCommandOutput(cmd, data string) {
+	uart.Write([]byte("+" + cmd + ": "))
+	uart.Write([]byte(data))
+	crlf()
+}

examples/lora/lorawan/atcmd/main.go

@@ -0,0 +1,90 @@
+// AT command set console running on the device UART to communicate with
+// an attached LoRa device.
+//
+// Computer <-> UART <-> MCU <-> SPI <-> SX126x/SX127x
+//
+// Connect using default baudrate for this hardware, 8-N-1 with your terminal program.
+// For details on the AT command set, see:
+// https://files.seeedstudio.com/products/317990687/res/LoRa-E5%20AT%20Command%20Specification_V1.0%20.pdf
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/lora/lorawan"
+	"tinygo.org/x/drivers/lora/lorawan/region"
+)
+
+// change these to test a different UART or pins if available
+var (
+	uart  = machine.Serial
+	tx    = machine.UART_TX_PIN
+	rx    = machine.UART_RX_PIN
+	input = make([]byte, 0, 64)
+
+	radio   lora.Radio
+	session *lorawan.Session
+	otaa    *lorawan.Otaa
+
+	defaultTimeout uint32 = 1000
+)
+
+var reg string
+
+func main() {
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	var err error
+	radio, err = common.SetupLora()
+	if err != nil {
+		fail(err.Error())
+	}
+
+	session = &lorawan.Session{}
+	otaa = &lorawan.Otaa{}
+	lorawan.UseRadio(radio)
+
+	switch reg {
+	case "AU915":
+		lorawan.UseRegionSettings(region.AU915())
+	case "EU868":
+		lorawan.UseRegionSettings(region.EU868())
+	case "US915":
+		lorawan.UseRegionSettings(region.US915())
+	default:
+		lorawan.UseRegionSettings(region.EU868())
+	}
+
+	for {
+		if uart.Buffered() > 0 {
+			data, _ := uart.ReadByte()
+
+			switch data {
+			case 13:
+				// return key
+				if err := parse(input); err != nil {
+					uart.Write([]byte("ERROR: "))
+					uart.Write([]byte(err.Error()))
+					crlf()
+				}
+				input = input[:0]
+			default:
+				// just capture the character
+				input = append(input, data)
+			}
+		}
+		time.Sleep(10 * time.Millisecond)
+	}
+}
+
+func fail(msg string) {
+	for {
+		uart.Write([]byte(msg))
+		crlf()
+
+		time.Sleep(time.Minute)
+	}
+}

examples/lora/lorawan/atcmd/parser.go

@@ -0,0 +1,115 @@
+package main
+
+import (
+	"errors"
+	"strings"
+)
+
+var (
+	errInvalidCommand = errors.New("Invalid command")
+)
+
+func parse(data []byte) error {
+	switch {
+	case len(data) < 2, string(data[0:2]) != "AT":
+		return errInvalidCommand
+	case len(data) == 2:
+		// just the AT command by itself
+		quicktest()
+	case len(data) < 6 || data[2] != '+':
+		return errInvalidCommand
+	default:
+		// parse the rest of the command
+		cmd, args, _ := strings.Cut(string(data[3:]), "=")
+		return parseCommand(cmd, args)
+	}
+
+	return nil
+}
+
+func parseCommand(cmd, args string) error {
+	switch cmd {
+	case "VER":
+		version()
+	case "ID":
+		id(args)
+	case "RESET":
+		reset()
+	case "MSG":
+		msg(args)
+	case "CMSG":
+		cmsg(args)
+	case "MSGHEX":
+		msghex(args)
+	case "CMSGHEX":
+		cmsghex(args)
+	case "PMSG":
+		pmsg(args)
+	case "PMSGHEX":
+		pmsg(args)
+	case "PORT":
+		port(args)
+	case "ADR":
+		adr(args)
+	case "DR":
+		dr(args)
+	case "CH":
+		ch(args)
+	case "POWER":
+		power(args)
+	case "REPT":
+		rept(args)
+	case "RETRY":
+		retry(args)
+	case "RXWIN2":
+		rxwin2(args)
+	case "RXWIN1":
+		rxwin1(args)
+	case "KEY":
+		key(args)
+	case "FDEFAULT":
+		fdefault(args)
+	case "MODE":
+		mode(args)
+	case "JOIN":
+		join(args)
+	case "BEACON":
+		join(args)
+	case "CLASS":
+		class(args)
+	case "DELAY":
+		delay(args)
+	case "LW":
+		lw(args)
+	case "WDT":
+		wdt(args)
+	case "LOWPOWER":
+		lowpower(args)
+	case "VDD":
+		vdd(args)
+	case "TEMP":
+		temp(args)
+	case "RTC":
+		rtc(args)
+	case "EEPROM":
+		eeprom(args)
+	case "UART":
+		uartcmd(args)
+	case "TEST":
+		test(args)
+	case "LOG":
+		log(args)
+	case "RECV":
+		recv(args)
+	case "RECVHEX":
+		recvhex(args)
+	case "SEND":
+		send(args)
+	case "SENDHEX":
+		sendhex(args)
+	default:
+		return errInvalidCommand
+	}
+
+	return nil
+}

examples/lora/lorawan/basic-demo/README.md

@@ -0,0 +1,44 @@
+# Simple Lorawan example
+
+This demo code will connect Lorawan network and send sample uplink message
+
+You may change your Lorawan keys (AppEUI, DevEUI, AppKEY) in key-default.go
+
+
+```
+$ tinygo monitor
+Connected to /dev/ttyACM0. Press Ctrl-C to exit.
+Lorawan Simple Demo
+Start Lorawan Join sequence
+loraConnect: Connected !
+```
+
+# Building
+
+## Simulator
+
+```
+tinygo flash -target pico ./examples/lora/lorawan/basic-demo
+```
+
+## PyBadge with LoRa Featherwing for EU868 region
+
+```
+tinygo flash -target pybadge -tags featherwing -ldflags="-X main.reg=EU868" ./examples/lora/lorawan/basic-demo
+```
+
+## LoRa-E5 for US915 region
+
+```
+tinygo flash -target lorae5 -ldflags="-X main.reg=US915" ./examples/lora/lorawan/basic-demo
+```
+
+
+## Enable debugging
+
+You can also enable some debug logs with ldflags :
+
+```
+$ tinygo build -ldflags="-X 'main.debug=true'" -target=lorae5
+```
+

examples/lora/lorawan/basic-demo/keys-default.go

@@ -0,0 +1,17 @@
+//go:build !customkeys
+
+package main
+
+import (
+	"tinygo.org/x/drivers/lora/lorawan"
+)
+
+// These are sample keys, so the example builds
+// Either change here, or create a new go file and use customkeys build tag
+func setLorawanKeys() {
+	otaa.SetAppEUI([]uint8{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00})
+	otaa.SetDevEUI([]uint8{0xB3, 0xD5, 0x41, 0x00, 0x0A, 0xF1, 0xA4, 0x45})
+	otaa.SetAppKey([]uint8{0x12, 0x22, 0xA3, 0xFF, 0x0C, 0x7B, 0x76, 0x7B, 0x8F, 0xD3, 0x12, 0x4F, 0xCE, 0x7A, 0x32, 0x16})
+	lorawan.SetPublicNetwork(true)
+
+}

examples/lora/lorawan/basic-demo/main.go

@@ -0,0 +1,120 @@
+// Simple code for connecting to Lorawan network and uploading sample payload
+package main
+
+import (
+	"errors"
+	"strconv"
+	"time"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/lora/lorawan"
+	"tinygo.org/x/drivers/lora/lorawan/region"
+)
+
+var (
+	reg   string
+	debug string
+)
+
+const (
+	LORAWAN_JOIN_TIMEOUT_SEC    = 180
+	LORAWAN_RECONNECT_DELAY_SEC = 15
+	LORAWAN_UPLINK_DELAY_SEC    = 60
+)
+
+var (
+	radio   lora.Radio
+	session *lorawan.Session
+	otaa    *lorawan.Otaa
+)
+
+func loraConnect() error {
+	start := time.Now()
+	var err error
+	for time.Since(start) < LORAWAN_JOIN_TIMEOUT_SEC*time.Second {
+		println("Trying to join network")
+		err = lorawan.Join(otaa, session)
+		if err == nil {
+			println("Connected to network !")
+			return nil
+		}
+		println("Join error:", err, "retrying in", LORAWAN_RECONNECT_DELAY_SEC, "sec")
+		time.Sleep(time.Second * LORAWAN_RECONNECT_DELAY_SEC)
+	}
+
+	err = errors.New("Unable to join Lorawan network")
+	println(err.Error())
+	return err
+}
+
+func failMessage(err error) {
+	println("FATAL:", err)
+	for {
+	}
+}
+
+func main() {
+	println("*** Lorawan basic join and uplink demo ***")
+
+	// Board specific Lorawan initialization
+	var err error
+	radio, err = common.SetupLora()
+	if err != nil {
+		failMessage(err)
+	}
+
+	// Required for LoraWan operations
+	session = &lorawan.Session{}
+	otaa = &lorawan.Otaa{}
+
+	// Connect the lorawan with the Lora Radio device.
+	lorawan.UseRadio(radio)
+	switch reg {
+	case "AU915":
+		lorawan.UseRegionSettings(region.AU915())
+	case "EU868":
+		lorawan.UseRegionSettings(region.EU868())
+	case "US915":
+		lorawan.UseRegionSettings(region.US915())
+	default:
+		lorawan.UseRegionSettings(region.EU868())
+	}
+
+	// Configure AppEUI, DevEUI, APPKey, and public/private Lorawan Network
+	setLorawanKeys()
+
+	if debug != "" {
+		println("main: Network joined")
+		println("main: DevEui, " + otaa.GetDevEUI())
+		println("main: AppEui, " + otaa.GetAppEUI())
+		println("main: DevAddr, " + otaa.GetAppKey())
+	}
+
+	// Try to connect Lorawan network
+	if err := loraConnect(); err != nil {
+		failMessage(err)
+	}
+
+	if debug != "" {
+		println("main: NetID, " + otaa.GetNetID())
+		println("main: NwkSKey, " + session.GetNwkSKey())
+		println("main: AppSKey, " + session.GetAppSKey())
+		println("main: Done")
+	}
+	// Try to periodicaly send an uplink sample message
+	upCount := 1
+	for {
+		payload := "Hello TinyGo #" + strconv.Itoa(upCount)
+
+		if err := lorawan.SendUplink([]byte(payload), session); err != nil {
+			println("Uplink error:", err)
+		} else {
+			println("Uplink success, msg=", payload)
+		}
+
+		println("Sleeping for", LORAWAN_UPLINK_DELAY_SEC, "sec")
+		time.Sleep(time.Second * LORAWAN_UPLINK_DELAY_SEC)
+		upCount++
+	}
+}

examples/lora/lorawan/common/featherwing.go

@@ -0,0 +1,14 @@
+//go:build featherwing
+
+package common
+
+import "machine"
+
+var (
+	// We assume LoRa Featherwing module with sx127x is connected to PyBadge
+	rstPin  = machine.D11
+	csPin   = machine.D10
+	dio0Pin = machine.D6
+	dio1Pin = machine.D9
+	spi     = machine.SPI0
+)

examples/lora/lorawan/common/lgt92.go

@@ -0,0 +1,13 @@
+//go:build lgt92
+
+package common
+
+import "machine"
+
+var (
+	rstPin  = machine.PB0
+	csPin   = machine.PA15
+	dio0Pin = machine.PC13
+	dio1Pin = machine.PB10
+	spi     = machine.SPI0
+)