Add Honeywell HSC TruStability SPI+I2C pressure sensor driver (#799)

* add honeywell pressure sensor * apply @aykevl suggestions
2026-07-26 02:28:41 +00:00 · 2025-11-08 06:45:18 -03:00
parent 51b604ce97
commit 5cb360a4bf
2 changed files with 240 additions and 0 deletions
@@ -0,0 +1,49 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/honeyhsc"
+)
+
+// Data taken from https://github.com/rodan/honeywell_hsc_ssc_i2c/blob/master/hsc_ssc_i2c.cpp
+// these defaults are valid for the HSCMRNN030PA2A3 chip
+const (
+	i2cAddress = 0x28
+	// 10%
+	outputMinimum = 0x666
+	// 90% of 2^14 - 1
+	outputMax = 0x399A
+	// min is 0 for sensors that give absolute values
+	pressureMin = 0
+	// 30psi (and we want results in millipascals)
+	// pressureMax = 206842.7
+	pressureMax = 206843 * 1000
+)
+
+func main() {
+	bus := machine.I2C0
+	err := bus.Configure(machine.I2CConfig{
+		Frequency: 400_000, // 100kHz minimum and 400kHz I2C maximum clock. 50 to 800 for SPI.
+		SDA:       machine.I2C0_SDA_PIN,
+		SCL:       machine.I2C0_SCL_PIN,
+	})
+	if err != nil {
+		panic(err.Error())
+	}
+	sensor := honeyhsc.NewDevI2C(bus, i2cAddress, outputMinimum, outputMax, pressureMin, pressureMax)
+	for {
+		time.Sleep(time.Second)
+		const measuremask = drivers.Pressure | drivers.Temperature
+		err := sensor.Update(measuremask)
+		if err != nil {
+			println("error updating measurements:", err.Error())
+			continue
+		}
+		P := sensor.Pressure()
+		T := sensor.Temperature()
+		println("pressure:", P, "temperature:", T)
+	}
+}
@@ -0,0 +1,191 @@
+package honeyhsc
+
+import (
+	"errors"
+	"math"
+
+	"tinygo.org/x/drivers"
+)
+
+var (
+	errSensorMissing = errors.New("hsc: not connected")
+	errDiagnostic    = errors.New("hsc: diagnostic error")
+)
+
+const (
+	measuremask  = drivers.Pressure | drivers.Temperature
+	statusMask   = 0b1100_0000
+	statusOffset = 6
+)
+
+// DevI2C is the TruStability® High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric
+// analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
+type DevI2C struct {
+	bus drivers.I2C
+	dev
+	addr uint8
+	buf  [6]byte
+}
+
+// NewDevI2C creates and returns a new DevI2C that communicates with an HSC device over the provided I2C bus.
+// Parameters:
+//   - bus: the I2C bus to use.
+//   - addr: the 7-bit I2C address of the sensor.
+//   - outMin, outMax: raw output code range (counts) corresponding to the pressure span. Depends on sensor model.
+//   - pMin, pMax: pressure range endpoints in millipascals (mPa). Depends on sensor model.
+//
+// The returned DevI2C will use these calibration parameters to convert raw bridge counts to pressure.
+func NewDevI2C(bus drivers.I2C, addr, outMin, outMax uint16, pMin, pMax int32) *DevI2C {
+	h := &DevI2C{
+		bus:  bus,
+		addr: uint8(addr),
+		dev: dev{
+			cmin: outMin,
+			cmax: outMax,
+			pmin: pMin,
+			pmax: pMax,
+		},
+	}
+	return h
+}
+
+// ReadTemperature reads and returns the temperature in milliKelvin (mC) from the I2C-attached HSC device.
+// It performs an Update internally to get the latest temperature value.
+func (h *DevI2C) ReadTemperature() (int32, error) {
+	err := h.Update(drivers.Temperature)
+	if err != nil {
+		return 0, err
+	}
+	return h.Temperature(), nil
+}
+
+// Update reads both temperature and pressure data from the I2C-attached HSC device when
+// the requested measurement mask includes pressure or temperature.
+// If neither pressure nor temperature is requested, Update is a no-op.
+func (d *DevI2C) Update(which drivers.Measurement) error {
+	// Update performs an I2C transaction to read 4 bytes, parses the status bits, 14-bit bridge data and
+	// temperature bits, and forwards them to the internal update routine. Any I2C transport error is returned,
+	// as well as errors produced by the internal update (e.g. errSensorMissing, errDiagnostic).
+	if which&measuremask == 0 {
+		return nil
+	}
+	rbuf := d.buf[:4]
+	wbuf := d.buf[4:6]
+	const reg = 0
+	value := (d.addr << 1) | 1
+	wbuf[0] = reg
+	wbuf[1] = value
+	err := d.bus.Tx(uint16(d.addr), wbuf, rbuf)
+	if err != nil {
+		return err
+	}
+	status := (rbuf[0] & statusMask) >> statusOffset
+	bridgeData := (uint16(rbuf[0]&^statusMask) << 8) | uint16(rbuf[1])
+	tempData := uint16(rbuf[2])<<8 | uint16(rbuf[3]&0xe0)>>5
+	return d.dev.update(status, bridgeData, tempData)
+}
+
+type pinout func(level bool)
+
+// DevI2C is the TruStability® High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric
+// analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
+type DevSPI struct {
+	spi drivers.SPI
+	cs  pinout
+	dev
+	buf [4]byte
+}
+
+// NewDevSPI creates and returns a new DevSPI that communicates with an HSC device over SPI.
+// Parameters:
+//   - conn: the SPI connection to use.
+//   - cs: a chip-select function that drives the device select line low/high.
+//   - outMin, outMax: raw output code range (counts) corresponding to the pressure span. Depends on sensor model.
+//   - pMin, pMax: pressure range endpoints in millipascals (mPa). Depends on sensor model.
+//
+// The function returns the constructed DevSPI and an error value (currently always nil).
+func NewDevSPI(conn drivers.SPI, cs pinout, outMin, outMax uint16, pMin, pMax int32) (*DevSPI, error) {
+	h := &DevSPI{
+		spi: conn,
+		cs:  cs,
+		dev: dev{
+			cmin: outMin,
+			cmax: outMax,
+			pmin: pMin,
+			pmax: pMax,
+		},
+	}
+	return h, nil
+}
+
+// ReadTemperature reads and returns the temperature in milliKelvin (mC) from the SPI-attached HSC device.
+// It performs an Update internally to get the latest temperature value.
+func (h *DevSPI) ReadTemperature() (int32, error) {
+	err := h.Update(drivers.Temperature)
+	if err != nil {
+		return 0, err
+	}
+	return h.Temperature(), nil
+}
+
+// Update reads pressure and temperature data from the SPI-attached HSC device when the requested measurement mask includes
+// pressure or temperature. If neither pressure nor temperature is requested, Update is a no-op.
+func (h *DevSPI) Update(which drivers.Measurement) error {
+	// It toggles the provided chip-select, performs an SPI transfer to read 4 bytes, parses the status bits,
+	// 14-bit bridge data and temperature bits, and forwards them to the internal update routine. Any SPI
+	// transport error is returned, as well as errors produced by the internal update (e.g. errSensorMissing, errDiagnostic).
+	if which&measuremask == 0 {
+		return nil
+	}
+	buf := &h.buf
+	h.cs(false)
+	err := h.spi.Tx(nil, buf[:4])
+	h.cs(true)
+	if err != nil {
+		return err
+	}
+	// First two bits are status bits.
+	status := (buf[0] & statusMask) >> statusOffset
+	bridgeData := (uint16(buf[0]&^statusMask) << 8) | uint16(buf[1])
+
+	tempData := uint16(buf[2])<<8 | uint16(buf[3]&0xe0)>>5
+	return h.dev.update(status, bridgeData, tempData)
+}
+
+type dev struct {
+	pressure   int32
+	temp       int32
+	cmin, cmax uint16
+	pmin, pmax int32
+}
+
+// Pressure returns the most recently computed pressure value in millipascals (mPa).
+// The value is taken from the last successful Update.
+func (d *dev) Pressure() int32 {
+	return d.pressure
+}
+
+// Temperature returns the most recently read temperature value in milliKelvin (mC).
+// The value is taken from the last successful Update.
+func (d *dev) Temperature() int32 {
+	return d.temp + 273_150
+}
+
+// update interprets raw sensor fields (status, bridgeData, tempData) and updates the dev's stored
+// pressure and temperature. It returns errSensorMissing when the temperature raw value indicates no sensor
+// (tempData == math.MaxUint16), errDiagnostic when the status indicates a device diagnostic condition
+// (status == 3), or nil on success. Pressure is computed with integer arithmetic using the configured
+// cmin/cmax -> pmin/pmax linear mapping in order to avoid overflows.
+func (d *dev) update(status uint8, bridgeData, tempData uint16) error {
+	if tempData == math.MaxUint16 {
+		return errSensorMissing
+	} else if status == 3 {
+		return errDiagnostic
+	}
+
+	// Take care not to overflow here.
+	p := (int32(bridgeData)-int32(d.cmin))*(d.pmax-d.pmin)/int32(d.cmax-d.cmin) + d.pmin
+	d.temp = int32(tempData)
+	d.pressure = p
+	return nil
+}