Running tests against an installed TinyGoRoot fails with:
```
=== CONT TestBuild/WebAssembly/gc.go-boehm
main_test.go:441: wasi-libc: did not find any files for pattern builder.filePattern{glob:"dlmalloc/src/dlmalloc.c", exclude:[]string(nil)}
```
because these files are not there, and are required with Boehm GC.
The previous versions calculated at init() prevented `interp` from running
in many cases, increasing compile times due to the increased need to revert
the partially interpreted results and also increasing binary runtime because
fewer optimizations had happened during interp.
Similar to PWM, I2C can only be used on some pins. To automatically
generate this information per board, we need to add extra comments that
can then be interpreted by doc-gen for the tinygo.org website.
This fixes/improves a few issues with I2C support:
* Validate I2C pins, so only pins that are supported by the hardware
can be used (similar to how it's done with PWM).
* Add address to Tx API (without it, the simulator can't really
simulate I2C).
* Add frequency when configuring. Not currently used, but might be
useful in the future and adding it now avoids possibly breaking
changes.
This is a breaking change, but since the simulator doesn't support I2C
yet that seems fine to me. (It does in my local changes, but those need
to be cleaned up before I can push them).
* Use diskutil on macOS to extract volume name and path for FAT mounts
* Improve FAT mount detection on macOS by parsing diskutil output into a map
* Simplify conditional check
This should avoid a deadlock when trying to print inside an interrupt,
if the interrupted code is also printing (and therefore has the print
lock taken).
The GC shouldn't try to interrupt other cores before they are started.
For example, it would be possible for the GC to run in a package
initializer (which is currently run on a single core). That would
suggest questionable program design, but it is something that should
work. So this commit makes sure the GC only tries to scan the stack of
other cores when those other cores have in fact started.
This adds support for `-gc=boehm` on `-target=wasip1` and `-target=wasm`
(in a browser or NodeJS). Notably it does *not* add Boehm GC support for
`-target=wasip2`, since that target doesn't have a real libc.
This commit adds support for a scheduler that runs a scheduler on all
available cores. It is meant to be used on baremetal systems with a
fixed number of cores, such as the RP2040.
The initial implementation adds support for multicore scheduling to the
riscv-qemu target as a convenient testing target. This means that this
new multicore scheduler is tested in CI, including a bunch of standard
library tests (`make tinygo-test-baremetal`). This should ensure the new
scheduler is reasonably well tested before trying to use it on
harder-to-debug targets like the RP2040.
The system stack is only needed when we're not on it. So we can directly
call task.SystemStack() without problems.
This also saves a tiny bit of binary size.
This type can be used to jump back to a previous position in a program
from inside an interrupt. This is useful for baremetal systems that
implement wfi but not wfe, and therefore have no easy (race-free) way to
wait until a flag gets changed inside an interrupt. This is an issue on
RISC-V, where this is racy (the interrupt might happen after the check
but before the wfi instruction):
configureInterrupt()
for flag.Load() != 0 {
riscv.Asm("wfi")
}
Accessing the same variable from multiple goroutines is unsafe, and will
fail with parallelism. A lightweight way to avoid issues is by using
atomic variables.
* machine: add support for BTT SKR Pico
Adds support for the BigTreeTech SKR Pico 3D-printer mainboard.
This board uses the RP2040.
* Fix build tag
* Add I2C defaults
* Run UART test instead of blinky1
* Use NoPin for I2C and SPI on BTT SKR Pico
* Cleanup comments
* Don't use ADC pin names
* Fix DMA to SPI transfers on RP2350
DMA DREQ line numbers for "flow control" between SPI bus and DMA channels on RP2350 differ from RP2040.
Tested with st7789 driver for Pico-1.14-LCD from Waveshare on Pico 2W. Without this fix func st7789.tx() blocks indefinitely while attempting to use DMA to SPI transfers.
* Add definitions for DMA DREQ "handshake" lines
Specific for RP2350, missing in generated src/device/rp/rp2350.go
* Add definitions for DMA DREQ "handshake" lines
Specific for RP2040, missing in generated src/device/rp/rp2040.go
* Complete table
* Complete table
* Remove redundant DMA_ prefix
* Correct name of Datasheet
* Correct name of Datasheet
* Refactor
Move global definitions to device/rp/
* Refactor
* Refactor
* Refacture
* Refacture
* Fix comments
* go fmt
* rename new non-generated files
Ayke van Laethem
Dmitrii Sharshakov
Elliott Sales de Andrade
Damian Gryski
Elias Naur
diwamoto
张之阳
deadprogram
emricks
micchie
Piotr Bocheński
Ömer Faruk IRMAK
Michael Smith
Ella Fox
Mateusz Nowak
Rolf Sommerhalder