Prepare for Drivers release 0.14.0

Signed-off-by: deadprogram <ron@hybridgroup.com>

.circleci/config.yml

@@ -6,7 +6,6 @@ jobs:
   build:
     docker:
       - image: tinygo/tinygo-dev
-    working_directory: /usr/local/go/src/tinygo.org/x/drivers
     steps:
       - checkout
       - run: tinygo version

CHANGELOG.md

@@ -1,3 +1,164 @@
+0.14.0
+---
+- **new devices**
+    - lis2mdl: add LIS2MDL magnetometer (#187)
+    - waveshare: add Waveshare 4.2in B/W e-paper driver (#183)
+- **enhancements**
+    - adt7410: add connection test and for that matter connection method
+    - gps
+        - add speed and heading to fix, as parsed from RMC NMEA sentence
+        - improvements and bugfixes (#186)
+    - ili9341
+        - add support for setting framerate, vsync pause, and reading scanline data.
+        - renamed NewSpi() to NewSPI() in accordance with Go naming conventions
+    - ws2812
+        - add support for ESP8266
+        - add support for ESP32
+- **bugfixes**
+    - ili9341
+        - rix setWindow bug, add CS pin for Clue compatibility. (#180)
+        - bugfix for RAMWR bug
+    - lis2mdl: turn on read mode on every read, to ensure that magnetometer data is updated
+- **core**
+    - i2c
+        - switch all i2c drivers definitions to use i2c bus interface type instead of machine package concrete type
+        - correct interface definition for I2C Tx function
+- **testing**
+    - fix smoke-test unless avr-gcc installed
+    - add very basic mock structs for testing i2c devices, based on work done by @rogpeppe
+    - improve API surface and implement one more test function in lis2mdl driver
+- **docs**
+    - replace README badge for godocs with pkgdocs
+
+0.13.0
+---
+- **new devices**
+    - bmi160: add initial support
+    - bmp280: added support for the Bosch BMP280 temperature and pressure sensor. (#158)
+    - lsm303agr: add lsm303agr (#162)
+    - ssd1351: add SSD1351 OLED display driver (#146)
+- **enhancements**
+    - hd44780: add Hd44780i2c driver (#173)
+    - ili9341
+        - add ILI9341 TFT driver (SPI) for ATSAMD2x (#174)
+        - cache address window to prevent sending unnecessary commands (#171)
+        - ILI9341 TFT driver (SPI) (#153)
+        - improve performance of ILI9341 on ATSAMD5X
+    - ST77xx: fix DrawFastHLine for ST77xx, SSD1331 and SSD1351 DrawFastHLine uses FillRectangle(x,y,width,height,c), so height must be 1 to draw a horizontal line
+    - tmp102: add Connected func to check for device
+    - wifinina: added UDP support
+    - ws2812: update ws2812_avr_16m.go
+- **bugfixes**
+    - apa102: avoid creating garbage
+    - bmp180: fix temperature type conversion
+- **core**
+    - all
+        - added custom import path (#161)
+        - changeover to eliminate all direct use of master/slave terminology
+    - build: try vendor in working directory to match expected module path
+    - ci: support Go modules
+    - modules: update go version and dependency
+- **docs**
+    - docs: reorder to correct alpha and adjust count of supported drivers
+
+0.12.0
+---
+- **new devices**
+    - hcsr04: Added HC-SR04 ultrasonic distance sensor. (#143)
+    - spi/qspi: Low-level IO driver for serial flash memory via SPI and QSPI (#124)
+    - tmp102: TMP102 low-power digital temperature sensor (#141)
+    - amg88xx: AMG88xx thermal camera module
+- **bugfixes**
+    - mqtt: reduce use of goroutines in router to not start a new goroutine for each invocation of each callback
+
+0.11.0
+---
+- **new devices**
+    - shiftregister: Support for various shift register chips (#135)
+- **enhancements**
+    - shifter: simplify API surface for PyBadge (#137)
+    - shifter: new API for shifter driver
+    - mqtt: use buffered channels for incoming messages to handle bursts
+    - ili9341: Adding scroll functionality (#121)
+- **bugfixes**
+    - wifinina: fix typo on StartScanNetworks
+    - ili9341: various bugfixes for display
+- **examples**
+    - semihosting: add example
+- **docs**
+    - readme: Use degree sign instead of ordinal
+    - all: fix celsius symbol in all code comments
+
+0.10.0
+---
+- **new devices**
+    - adt7410: Support for ADT7410 temperature sensor (#109)
+    - ili9341: ILI9341 TFT driver (#115)
+    - l293x: added support for h-bridge motor controller
+    - l9110x: add support for L9110x h-bridge motor driver
+    - resistive: Adding driver for four-wire resistive touchscreen (#118)
+- **enhancements**
+    - st7735: added scroll functionality to st7735
+    - st7735: remove default offsets
+    - st7789: remove default offsets
+    - ws2812: Added nrf52840 tag to ws2812
+    - ws2812: work-arounds to allow Digispark to control WS2812 LEDs
+- **docs**
+    - readme: update README to include list of all 44 drivers
+    - wifinina: update docs and add Dockerfile to build firmware
+    - wifinina: update docs and info on how to install WiFiNINA driver
+
+0.9.0
+---
+- **new devices**
+    - net: shared implementation of net package for serial wifi devices
+    - shifter: add support for bit Parallel In Serial Out (PISO) shifter
+    - stepper: add support for dual stepper motor
+    - wifinina: add implementation for WiFiNINA firmware
+- **enhancements**
+    - st7735: improvements in st7735 driver
+    - st7789: improvements in st7789 driver
+    - ws2812: add support for 120Mhz Cortex-M4
+    - ws2812: added Feather M0 and Trinket M0 to build tags for WS2812
+    - ws2812: add support for simulation
+- **bugfixes**
+    - ws2812: fix "invalid symbol redefinition" error
+- **examples**
+    - Add examples for wifinina drivers
+
+0.8.0
+---
+- **new devices**
+    - mcp3008: add implementation for MCP3008 ADC with SPI interface
+    - semihosting: initial implementation of ARM semihosting
+- **enhancements**
+    - espat: refactor response processing for greater speed and efficiency
+    - espat: implement mqtt subscribe functionality via blocking select/channels (experiemental)
+- **bugfixes**
+    - st7789: fix index out of bounds error
+- **examples**
+    - Add espat driver example for mqtt subscribe
+
+0.7.0
+---
+- **new devices**
+    - veml6070: add Vishay UV light sensor
+- **enhancements**
+    - lis3dh: example uses I2C1 so requires config to specify pins since they are not default
+    - ssd1331: make SPI TX faster
+    - st7735: make SPI Tx faster
+- **docs**
+    - complete missing GoDocs for main and sub-packages
+- **core**
+    - add Version string for support purposes
+- **examples**
+    - Change all espat driver examples to use Arduino Nano33 IoT by default
+
+0.6.0
+---
+- **new devices**
+    - Support software SPI for APA102 (Itsy Bitsy M0 on-board "Dotstar" LED as example)
+
 0.5.0
 ---
 - **new devices**

CONTRIBUTING.md

@@ -20,7 +20,7 @@ Please first open a Github issue. We want to help, and also make sure that there
 
 ## How to use our Github repository
 
-The `master` branch of this repo will always have the latest released version of the TinyGo drivers. All of the active development work for the next release will take place in the `dev` branch. The TinyGo drivers will use semantic versioning and will create a tag/release for each release.
+The `release` branch of this repo will always have the latest released version of the TinyGo drivers. All of the active development work for the next release will take place in the `dev` branch. The TinyGo drivers will use semantic versioning and will create a tag/release for each release.
 
 Here is how to contribute back some code or documentation:
 

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2018-2019 The TinyGo Authors. All rights reserved.
+Copyright (c) 2018-2020 The TinyGo Authors. All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are

Makefile

@@ -9,45 +9,153 @@ fmt-check:
 
 smoke-test:
 	@mkdir -p build
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/adxl345/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/apa102/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/at24cx/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/bh1750/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/blinkm/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/bmp180/main.go
-	tinygo build -size short -o ./build/test.elf -target=bluepill ./examples/ds1307/sram/main.go
-	tinygo build -size short -o ./build/test.elf -target=bluepill ./examples/ds1307/time/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/ds3231/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/easystepper/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/espat/espconsole/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/espat/esphub/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/espat/espstation/main.go
-	tinygo build -size short -o ./build/test.elf -target=feather-m0 ./examples/gps/i2c/main.go
-	tinygo build -size short -o ./build/test.elf -target=feather-m0 ./examples/gps/uart/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/hd44780/customchar/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/hd44780/text/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/hub75/main.go
-	tinygo build -size short -o ./build/test.elf -target=circuitplay-express ./examples/lis3dh/main.go
-	tinygo build -size short -o ./build/test.elf -target=arduino-nano33 ./examples/lsm6ds3/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/mag3110/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/microbitmatrix/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/mma8653/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/mpu6050/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/pcd8544/setbuffer/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/pcd8544/setpixel/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/sht3x/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/ssd1306/i2c_128x32/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/ssd1306/spi_128x64/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/ssd1331/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/st7735/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/st7789/main.go
-	tinygo build -size short -o ./build/test.elf -target=circuitplay-express ./examples/thermistor/main.go
-	tinygo build -size short -o ./build/test.elf -target=itsybitsy-m0 ./examples/vl53l1x/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/waveshare-epd/epd2in13/main.go
-	tinygo build -size short -o ./build/test.elf -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
-	tinygo build -size short -o ./build/test.elf -target=circuitplay-express ./examples/ws2812/main.go
-	tinygo build -size short -o ./build/test.elf -target=trinket-m0 ./examples/bme280/main.go
-	tinygo build -size short -o ./build/test.elf -target=circuitplay-express ./examples/microphone/main.go
-	tinygo build -size short -o ./build/test.elf -target=circuitplay-express ./examples/buzzer/main.go
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adt7410/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adxl345/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/amg88xx
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/itsybitsy-m0/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/at24cx/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bh1750/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/blinkm/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmi160/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp180/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp280/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/sram/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/time/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/ds3231/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/easystepper/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espconsole/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/esphub/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espstation/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/flash/console/spi
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/flash/console/qspi
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/i2c/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/uart/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/hcsr04/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/customchar/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/text/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/hd44780i2c/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hub75/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/basic
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/basic
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/pyportal_boing
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/scroll
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/scroll
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis3dh/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/lsm303agr/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/lsm6ds3/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mag3110/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp3008/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/microbitmatrix/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mma8653/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mpu6050/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setbuffer/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setpixel/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/shifter/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht3x/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/i2c_128x32/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/spi_128x64/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1331/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7735/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7789/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/thermistor/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/fourwire/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/pyportal_touchpaint/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl53l1x/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd4in2/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/ntpclient/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/udpstation/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/tcpclient/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/webclient/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/ws2812
+	@md5sum ./build/test.hex
+ifneq ($(AVR), 0)
+	tinygo build -size short -o ./build/test.hex -target=digispark ./examples/ws2812
+	@md5sum ./build/test.hex
+endif
+	tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bme280/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/microphone/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/buzzer/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/veml6070/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/simple/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/speed/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/simple/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/speed/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=nucleo-f103rb ./examples/shiftregister/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=hifive1b ./examples/ssd1351/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis2mdl/main.go
+	@md5sum ./build/test.hex
 
 test: clean fmt-check smoke-test

README.md

@@ -1,6 +1,6 @@
 # TinyGo Drivers
 
-[![GoDoc](https://godoc.org/tinygo.org/x/drivers?status.svg)](https://godoc.org/tinygo.org/x/drivers) [![CircleCI](https://circleci.com/gh/tinygo-org/drivers/tree/dev.svg?style=svg)](https://circleci.com/gh/tinygo-org/drivers/tree/dev)
+[![PkgGoDev](https://pkg.go.dev/badge/tinygo.org/x/drivers)](https://pkg.go.dev/tinygo.org/x/drivers) [![CircleCI](https://circleci.com/gh/tinygo-org/drivers/tree/dev.svg?style=svg)](https://circleci.com/gh/tinygo-org/drivers/tree/dev)
 
 
 This package provides a collection of hardware drivers for devices that can be used together with [TinyGo](https://tinygo.org).
@@ -40,7 +40,7 @@ func main() {
 
     for {
         temp, _ := sensor.ReadTemperature()
-        println("Temperature:", float32(temp)/1000, "ºC")
+        println("Temperature:", float32(temp)/1000, "°C")
 
         pressure, _ := sensor.ReadPressure()
         println("Pressure", float32(pressure)/100000, "hPa")
@@ -52,39 +52,62 @@ func main() {
 
 ## Currently supported devices
 
+The following 53 devices are supported.
+
 | Device Name | Interface Type |
 |----------|-------------|
+| [ADT7410 I2C Temperature Sensor](https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf) | I2C |
 | [ADXL345 accelerometer](http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf) | I2C |
+| [AMG88xx 8x8 Thermal camera sensor](https://cdn-learn.adafruit.com/assets/assets/000/043/261/original/Grid-EYE_SPECIFICATIONS%28Reference%29.pdf) | I2C |
 | [APA102 RGB LED](https://cdn-shop.adafruit.com/product-files/2343/APA102C.pdf) | SPI |
 | [AT24CX 2-wire serial EEPROM](https://www.openimpulse.com/blog/wp-content/uploads/wpsc/downloadables/24C32-Datasheet.pdf) | I2C |
+| [BBC micro:bit LED matrix](https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf) | GPIO |
 | [BH1750 ambient light sensor](https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf) | I2C |
 | [BlinkM RGB LED](http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf) | I2C |
 | [BME280 humidity/pressure sensor](https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf) | I2C |
+| [BMI160 accelerometer/gyroscope](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi160-ds000.pdf) | SPI |
 | [BMP180 barometer](https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf) | I2C |
+| [BMP280 temperature/barometer](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf) | I2C |
 | [Buzzer](https://en.wikipedia.org/wiki/Buzzer#Piezoelectric) | GPIO |
 | [DS1307 real time clock](https://datasheets.maximintegrated.com/en/ds/DS1307.pdf) | I2C |
 | [DS3231 real time clock](https://datasheets.maximintegrated.com/en/ds/DS3231.pdf) | I2C |
-| ["Easystepper" stepper motor controller](https://en.wikipedia.org/wiki/Stepper_motor) | GPIO |
+| [ESP32 as WiFi Coprocessor with Arduino nina-fw](https://github.com/arduino/nina-fw) | SPI |
 | [ESP8266/ESP32 AT Command set for WiFi/TCP/UDP](https://github.com/espressif/esp32-at) | UART |
 | [GPS module](https://www.u-blox.com/en/product/neo-6-series) | I2C/UART |
+| [HC-SR04 Ultrasonic distance sensor](https://cdn.sparkfun.com/datasheets/Sensors/Proximity/HCSR04.pdf) | GPIO |
+| [HD44780 LCD controller](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf) | GPIO/I2C |
 | [HUB75 RGB led matrix](https://cdn-learn.adafruit.com/downloads/pdf/32x16-32x32-rgb-led-matrix.pdf) | SPI |
+| [ILI9341 TFT color display](https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf) | SPI |
+| [L293x motor driver](https://www.ti.com/lit/ds/symlink/l293d.pdf) | GPIO/PWM |
+| [L9110x motor driver](https://www.elecrow.com/download/datasheet-l9110.pdf) | GPIO/PWM |
+| [LIS2MDL magnetometer](https://www.st.com/resource/en/datasheet/lis2mdl.pdf) | I2C |
 | [LIS3DH accelerometer](https://www.st.com/resource/en/datasheet/lis3dh.pdf) | I2C |
 | [LSM6DS3 accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3.pdf) | I2C |
 | [MAG3110 magnetometer](https://www.nxp.com/docs/en/data-sheet/MAG3110.pdf) | I2C |
-| [BBC micro:bit LED matrix](https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf) | GPIO |
+| [MCP3008 analog to digital converter (ADC)](http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf) | SPI |
 | [Microphone - PDM](https://cdn-learn.adafruit.com/assets/assets/000/049/977/original/MP34DT01-M.pdf) | I2S/PDM |
 | [MMA8653 accelerometer](https://www.nxp.com/docs/en/data-sheet/MMA8653FC.pdf) | I2C |
 | [MPU6050 accelerometer/gyroscope](https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf) | I2C |
 | [PCD8544 display](http://eia.udg.edu/~forest/PCD8544_1.pdf) | SPI |
+| [Resistive Touchscreen (4-wire)](http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf) | GPIO |
+| [Semihosting](https://wiki.segger.com/Semihosting) | Debug |
+| [Shift register (PISO)](https://en.wikipedia.org/wiki/Shift_register#Parallel-in_serial-out_\(PISO\)) | GPIO |
+| [Shift registers (SIPO)](https://en.wikipedia.org/wiki/Shift_register#Serial-in_parallel-out_(SIPO)) | GPIO |
 | [SHT3x Digital Humidity Sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf) | I2C |
+| [SPI NOR Flash Memory](https://en.wikipedia.org/wiki/Flash_memory#NOR_flash) | SPI/QSPI |
 | [SSD1306 OLED display](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf) | I2C / SPI |
 | [SSD1331 TFT color display](https://www.crystalfontz.com/controllers/SolomonSystech/SSD1331/381/) | SPI |
+| [SSD1351 OLED display](https://download.mikroe.com/documents/datasheets/ssd1351-revision-1.3.pdf) | SPI |
 | [ST7735 TFT color display](https://www.crystalfontz.com/controllers/Sitronix/ST7735R/319/) | SPI |
 | [ST7789 TFT color display](https://cdn-shop.adafruit.com/product-files/3787/3787_tft_QT154H2201__________20190228182902.pdf) | SPI |
+| [Stepper motor "Easystepper" controller](https://en.wikipedia.org/wiki/Stepper_motor) | GPIO |
 | [Thermistor](https://www.farnell.com/datasheets/33552.pdf) | ADC |
+| [TMP102 I2C Temperature Sensor](https://download.mikroe.com/documents/datasheets/tmp102-data-sheet.pdf) | I2C |
+| [VEML6070 UV light sensor](https://www.vishay.com/docs/84277/veml6070.pdf) | I2C |
 | [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf) | I2C |
-| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf) | SPI |
 | [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf) | SPI |
+| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf) | SPI |
+| [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf) | SPI |
 | [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf) | GPIO |
 
 ## Contributing

adt7410/adt7410.go

@@ -0,0 +1,92 @@
+// Package adt7410 provides a driver for the adt7410 I2C Temperature Sensor.
+//
+// Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf
+//
+package adt7410 // import "tinygo.org/x/drivers/adt7410"
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+type Error uint8
+
+const (
+	ErrInvalidID Error = 0x1
+)
+
+func (e Error) Error() string {
+	switch e {
+	case ErrInvalidID:
+		return "Invalid chip ID"
+	default:
+		return "Unknown error"
+	}
+}
+
+type Device struct {
+	bus     drivers.I2C
+	buf     []byte
+	Address uint8
+}
+
+// New returns ADT7410 device for the provided I2C bus using default address.
+// of 0x48 (1001000).  To use multiple ADT7410 devices, the last 2 bits of the address
+// can be set using by connecting to the A1 and A0 pins to VDD or GND (for a
+// total of up to 4 devices on a I2C bus).  Also note that 10k pullups are
+// recommended for the SDA and SCL lines.
+func New(i2c drivers.I2C) *Device {
+	return &Device{
+		bus:     i2c,
+		buf:     make([]byte, 2),
+		Address: Address,
+	}
+}
+
+// Configure the ADT7410 device.
+func (d *Device) Configure() (err error) {
+	// reset the chip
+	d.writeByte(RegReset, 0xFF)
+	time.Sleep(10 * time.Millisecond)
+	return
+}
+
+// Connected returns whether sensor has been found.
+func (d *Device) Connected() bool {
+	data := []byte{0}
+	d.bus.ReadRegister(uint8(d.Address), RegID, data)
+	return data[0]&0xF8 == 0xC8
+}
+
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
+func (d *Device) ReadTemperature() (temperature int32, err error) {
+	return (int32(d.readUint16(RegTempValueMSB)) * 1000) / 128, nil
+}
+
+// ReadTempC returns the value in the temperature value register, in Celsius.
+func (d *Device) ReadTempC() float32 {
+	t := d.readUint16(RegTempValueMSB)
+	return float32(int(t)) / 128.0
+}
+
+// ReadTempF returns the value in the temperature value register, in Fahrenheit.
+func (d *Device) ReadTempF() float32 {
+	return d.ReadTempC()*1.8 + 32.0
+}
+
+func (d *Device) writeByte(reg uint8, data byte) {
+	d.buf[0] = reg
+	d.buf[1] = data
+	d.bus.Tx(uint16(d.Address), d.buf, nil)
+}
+
+func (d *Device) readByte(reg uint8) byte {
+	d.bus.ReadRegister(d.Address, reg, d.buf)
+	return d.buf[0]
+}
+
+func (d *Device) readUint16(reg uint8) uint16 {
+	d.bus.ReadRegister(d.Address, reg, d.buf)
+	return uint16(d.buf[0])<<8 | uint16(d.buf[1])
+}

adt7410/adt7410_test.go

@@ -0,0 +1,49 @@
+package adt7410
+
+import (
+	"testing"
+
+	qt "github.com/frankban/quicktest"
+	"tinygo.org/x/drivers/tester"
+)
+
+func TestDefaultI2CAddress(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	dev := New(bus)
+	c.Assert(dev.Address, qt.Equals, uint8(Address))
+}
+
+func TestWhoAmI(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice(c, Address)
+	fake.SetupRegisters(defaultRegisters())
+	bus.AddDevice(fake)
+
+	dev := New(bus)
+	c.Assert(dev.Connected(), qt.Equals, true)
+
+	fake.SetupRegister(RegID, 0x99)
+	c.Assert(dev.Connected(), qt.Equals, false)
+}
+
+// defaultRegisters returns the default values for all of the device's registers.
+// see table 22 on page 27 of the datasheet.
+func defaultRegisters() []uint8 {
+	return []uint8{
+		RegTempValueMSB: 0,
+		RegTempValueLSB: 0,
+		RegStatus:       0,
+		RegConfig:       0,
+		RegTHIGHMsbReg:  0x20,
+		RegTHIGHLsbReg:  0,
+		RegTLOWMsbReg:   0x05,
+		RegTLOWLsbReg:   0,
+		RegTCRITMsbReg:  0x49,
+		RegTCRITLsbReg:  0x80,
+		RegTHYSTReg:     0x05,
+		RegID:           0xC8,
+		RegReset:        0,
+	}
+}

adt7410/registers.go

@@ -0,0 +1,70 @@
+package adt7410
+
+// 0x00 Temperature value most significant byte 0x00
+// 0x01 Temperature value least significant byte 0x00
+// 0x02 Status 0x00
+// 0x03 Configuration 0x00
+// 0x04 THIGH setpoint most significant byte 0x20 (64°C)
+// 0x05 THIGH setpoint least significant byte 0x00 (64°C)
+// 0x06 TLOW setpoint most significant byte 0x05 (10°C)
+// 0x07 TLOW setpoint least significant byte 0x00 (10°C)
+// 0x08 TCRIT setpoint most significant byte 0x49 (147°C)
+// 0x09 TCRIT setpoint least significant byte 0x80 (147°C)
+// 0x0A THYST setpoint 0x05 (5°C)
+// 0x0B ID 0xCX
+// 0x0C Reserved 0xXX
+// 0x0D Reserved 0xXX
+// 0x2E Reserved 0xXX
+// 0x2F Software reset 0xXX
+
+const (
+	// Address is default I2C address.
+	Address = 0x48
+	// Address1 is for first device, aka the default.
+	Address1 = Address
+	// Address2 is for second device.
+	Address2 = 0x49
+	// Address3 is for third device.
+	Address3 = 0x4A
+	// Address4 is for fourth device.
+	Address4 = 0x4B
+
+	// Temperature Value MSB Register
+	RegTempValueMSB = 0x0
+
+	// Temperature Value LSB Register
+	RegTempValueLSB = 0x1
+
+	// Status Register
+	RegStatus = 0x2
+
+	// Config Register
+	RegConfig = 0x3
+
+	// THIGH setpoint most significant byte 0x20 (64°C)
+	RegTHIGHMsbReg = 0x4
+
+	// THIGH setpoint least significant byte 0x00 (64°C)
+	RegTHIGHLsbReg = 0x5
+
+	// TLOW setpoint most significant byte 0x05 (10°C)
+	RegTLOWMsbReg = 0x6
+
+	// TLOW setpoint least significant byte 0x00 (10°C)
+	RegTLOWLsbReg = 0x7
+
+	// TCRIT setpoint most significant byte 0x49 (147°C)
+	RegTCRITMsbReg = 0x8
+
+	// TCRIT setpoint least significant byte 0x80 (147°C)
+	RegTCRITLsbReg = 0x9
+
+	// THYST setpoint 0x05 (5°C)
+	RegTHYSTReg = 0xA
+
+	// ID Register (0xCx)
+	RegID = 0x0B
+
+	// Software Reset Register
+	RegReset = 0x2F
+)

adxl345/adxl345.go

@@ -6,9 +6,7 @@
 //
 package adxl345 // import "tinygo.org/x/drivers/adxl345"
 
-import (
-	"machine"
-)
+import "tinygo.org/x/drivers"
 
 type Range uint8
 type Rate uint8
@@ -40,7 +38,7 @@ type bwRate struct {
 
 // Device wraps an I2C connection to a ADXL345 device.
 type Device struct {
-	bus        machine.I2C
+	bus        drivers.I2C
 	Address    uint16
 	powerCtl   powerCtl
 	dataFormat dataFormat
@@ -52,7 +50,7 @@ type Device struct {
 //
 // This function only creates the Device object, it does not init the device.
 // To do that you must call the Configure() method on the Device before using it.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus: bus,
 		powerCtl: powerCtl{

amg88xx/amg88xx.go

@@ -0,0 +1,159 @@
+// Package amg88xx provides a driver for the AMG88XX Thermal Camera
+//
+// Datasheet:
+// https://cdn-learn.adafruit.com/assets/assets/000/043/261/original/Grid-EYE_SPECIFICATIONS%28Reference%29.pdf
+package amg88xx // import "tinygo.org/x/drivers/amg88xx"
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+// Device wraps an I2C connection to a AMG88xx device.
+type Device struct {
+	bus             drivers.I2C
+	Address         uint16
+	data            []uint8
+	interruptMode   InterruptMode
+	interruptEnable uint8
+}
+
+type InterruptMode uint8
+
+type Config struct {
+}
+
+// New creates a new AMG88xx connection. The I2C bus must already be
+// configured.
+//
+// This function only creates the Device object, it does not touch the device.
+func New(bus drivers.I2C) Device {
+	return Device{
+		bus:     bus,
+		Address: AddressHigh,
+	}
+}
+
+// Configure sets up the device for communication
+func (d *Device) Configure(cfg Config) {
+	d.data = make([]uint8, 128)
+
+	d.SetPCTL(NORMAL_MODE)
+	d.SetReset(INITIAL_RESET)
+	d.SetFrameRate(FPS_10)
+
+	time.Sleep(100 * time.Millisecond)
+}
+
+// ReadPixels returns the 64 values (8x8 grid) of the sensor converted to  millicelsius
+func (d *Device) ReadPixels(buffer *[64]int16) {
+	d.bus.ReadRegister(uint8(d.Address), PIXEL_OFFSET, d.data)
+	for i := 0; i < 64; i++ {
+		buffer[i] = int16((uint16(d.data[2*i+1]) << 8) | uint16(d.data[2*i]))
+		if (buffer[i] & (1 << 11)) > 0 { // temperature negative
+			buffer[i] &= ^(1 << 11)
+			buffer[i] = -buffer[i]
+		}
+		buffer[i] *= PIXEL_TEMP_CONVERSION
+	}
+}
+
+// SetPCTL sets the PCTL
+func (d *Device) SetPCTL(pctl uint8) {
+	d.bus.WriteRegister(uint8(d.Address), PCTL, []byte{pctl})
+}
+
+// SetReset sets the reset value
+func (d *Device) SetReset(rst uint8) {
+	d.bus.WriteRegister(uint8(d.Address), RST, []byte{rst})
+}
+
+// SetFrameRate configures the frame rate
+func (d *Device) SetFrameRate(framerate uint8) {
+	d.bus.WriteRegister(uint8(d.Address), FPSC, []byte{framerate & 0x01})
+}
+
+// SetMovingAverageMode sets the moving average mode
+func (d *Device) SetMovingAverageMode(mode bool) {
+	var value uint8
+	if mode {
+		value = 1
+	}
+	d.bus.WriteRegister(uint8(d.Address), AVE, []byte{value << 5})
+}
+
+// SetInterruptLevels sets the interrupt levels
+func (d *Device) SetInterruptLevels(high int16, low int16) {
+	d.SetInterruptLevelsHysteresis(high, low, (high*95)/100)
+}
+
+// SetInterruptLevelsHysteresis sets the interrupt levels with hysteresis
+func (d *Device) SetInterruptLevelsHysteresis(high int16, low int16, hysteresis int16) {
+	high = high / PIXEL_TEMP_CONVERSION
+	if high < -4095 {
+		high = -4095
+	}
+	if high > 4095 {
+		high = 4095
+	}
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(high & 0xFF)})
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((high & 0xFF) >> 4)})
+
+	low = low / PIXEL_TEMP_CONVERSION
+	if low < -4095 {
+		low = -4095
+	}
+	if low > 4095 {
+		low = 4095
+	}
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(low & 0xFF)})
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((low & 0xFF) >> 4)})
+
+	hysteresis = hysteresis / PIXEL_TEMP_CONVERSION
+	if hysteresis < -4095 {
+		hysteresis = -4095
+	}
+	if hysteresis > 4095 {
+		hysteresis = 4095
+	}
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8(hysteresis & 0xFF)})
+	d.bus.WriteRegister(uint8(d.Address), INTHL, []byte{uint8((hysteresis & 0xFF) >> 4)})
+}
+
+// EnableInterrupt enables the interrupt pin on the device
+func (d *Device) EnableInterrupt() {
+	d.interruptEnable = 1
+	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+}
+
+// DisableInterrupt disables the interrupt pin on the device
+func (d *Device) DisableInterrupt() {
+	d.interruptEnable = 0
+	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+}
+
+// SetInterruptMode sets the interrupt mode
+func (d *Device) SetInterruptMode(mode InterruptMode) {
+	d.interruptMode = mode
+	d.bus.WriteRegister(uint8(d.Address), INTC, []byte{((uint8(d.interruptMode) << 1) | d.interruptEnable) & 0x03})
+}
+
+// GetInterrupt reads the state of the triggered interrupts
+func (d *Device) GetInterrupt() []uint8 {
+	data := make([]uint8, 8)
+	d.bus.ReadRegister(uint8(d.Address), INT_OFFSET, data)
+	return data
+}
+
+// ClearInterrupt clears any triggered interrupts
+func (d *Device) ClearInterrupt() {
+	d.SetReset(FLAG_RESET)
+}
+
+// ReadThermistor reads the onboard thermistor
+func (d *Device) ReadThermistor() int16 {
+	data := make([]uint8, 2)
+	d.bus.ReadRegister(uint8(d.Address), TTHL, data)
+	return (int16((uint16(data[1])<<8)|uint16(data[0])) * THERMISTOR_CONVERSION) / 10
+}

amg88xx/registers.go

@@ -0,0 +1,46 @@
+package amg88xx
+
+// The I2C address which this device listens to.
+const AddressHigh = 0x69
+const AddressLow = 0x68
+
+const (
+	PCTL         = 0x00
+	RST          = 0x01
+	FPSC         = 0x02
+	INTC         = 0x03
+	STAT         = 0x04
+	SCLR         = 0x05
+	AVE          = 0x07
+	INTHL        = 0x08
+	INTHH        = 0x09
+	INTLL        = 0x0A
+	INTLH        = 0x0B
+	IHYSL        = 0x0C
+	IHYSH        = 0x0D
+	TTHL         = 0x0E
+	TTHH         = 0x0F
+	INT_OFFSET   = 0x010
+	PIXEL_OFFSET = 0x80
+
+	// power modes
+	NORMAL_MODE = 0x00
+	SLEEP_MODE  = 0x01
+	STAND_BY_60 = 0x20
+	STAND_BY_10 = 0x21
+
+	// resets
+	FLAG_RESET    = 0x30
+	INITIAL_RESET = 0x3F
+
+	// frame rates
+	FPS_10 = 0x00
+	FPS_1  = 0x01
+
+	// interrupt modes
+	DIFFERENCE     InterruptMode = 0x00
+	ABSOLUTE_VALUE InterruptMode = 0x01
+
+	PIXEL_TEMP_CONVERSION = 250
+	THERMISTOR_CONVERSION = 625
+)

apa102/apa102.go

@@ -19,17 +19,33 @@ const (
 	GRB
 )
 
+var startFrame = []byte{0x00, 0x00, 0x00, 0x00}
+
 // Device wraps APA102 SPI LEDs.
 type Device struct {
-	bus   machine.SPI
+	bus   SPI
 	Order int
 }
 
+// The SPI interface specifies the minimum functionality that a bus
+// implementation needs to provide for use by the APA102 driver.  Hardware
+// SPI from the TinyGo "machine" package implements this already.
+type SPI interface {
+	Tx(w, r []byte) error
+	Transfer(b byte) (byte, error)
+}
+
 // New returns a new APA102 driver. Pass in a fully configured SPI bus.
-func New(b machine.SPI) Device {
+func New(b SPI) Device {
 	return Device{bus: b, Order: BGR}
 }
 
+// NewSoftwareSPI returns a new APA102 driver that will use a software based
+// implementation of the SPI protocol.
+func NewSoftwareSPI(sckPin, sdoPin machine.Pin, delay uint32) Device {
+	return New(&bbSPI{SCK: sckPin, SDO: sdoPin, Delay: delay})
+}
+
 // WriteColors writes the given RGBA color slice out using the APA102 protocol.
 // The A value (Alpha channel) is used for brightness, set to 0xff (255) for maximum.
 func (d Device) WriteColors(cs []color.RGBA) (n int, err error) {
@@ -38,22 +54,22 @@ func (d Device) WriteColors(cs []color.RGBA) (n int, err error) {
 	// write data
 	for _, c := range cs {
 		// brightness is scaled to 5 bit value
-		d.bus.Tx([]byte{0xe0 | (c.A >> 3)}, nil)
+		d.bus.Transfer(0xe0 | (c.A >> 3))
 
 		// set the colors
 		switch d.Order {
 		case BRG:
-			d.bus.Tx([]byte{c.B}, nil)
-			d.bus.Tx([]byte{c.R}, nil)
-			d.bus.Tx([]byte{c.G}, nil)
+			d.bus.Transfer(c.B)
+			d.bus.Transfer(c.R)
+			d.bus.Transfer(c.G)
 		case GRB:
-			d.bus.Tx([]byte{c.G}, nil)
-			d.bus.Tx([]byte{c.R}, nil)
-			d.bus.Tx([]byte{c.B}, nil)
+			d.bus.Transfer(c.G)
+			d.bus.Transfer(c.R)
+			d.bus.Transfer(c.B)
 		case BGR:
-			d.bus.Tx([]byte{c.B}, nil)
-			d.bus.Tx([]byte{c.G}, nil)
-			d.bus.Tx([]byte{c.R}, nil)
+			d.bus.Transfer(c.B)
+			d.bus.Transfer(c.G)
+			d.bus.Transfer(c.R)
 		}
 	}
 
@@ -73,7 +89,7 @@ func (d Device) Write(buf []byte) (n int, err error) {
 
 // startFrame sends the start bytes for a strand of LEDs.
 func (d Device) startFrame() {
-	d.bus.Tx([]byte{0x00, 0x00, 0x00, 0x00}, nil)
+	d.bus.Tx(startFrame, nil)
 }
 
 // endFrame sends the end frame marker with one extra bit per LED so
@@ -81,6 +97,6 @@ func (d Device) startFrame() {
 // See https://cpldcpu.wordpress.com/2014/11/30/understanding-the-apa102-superled/
 func (d Device) endFrame(count int) {
 	for i := 0; i < count/16; i++ {
-		d.bus.Tx([]byte{0xff}, nil)
+		d.bus.Transfer(0xff)
 	}
 }

apa102/softspi.go

@@ -0,0 +1,70 @@
+package apa102
+
+import "machine"
+
+// bbSPI is a dumb bit-bang implementation of SPI protocol that is hardcoded
+// to mode 0 and ignores trying to receive data. Just enough for the APA102.
+// Note: making this unexported for now because it is probable not suitable
+// most purposes other than the APA102 package. It might be desirable to make
+// this more generic and include it in the TinyGo "machine" package instead.
+type bbSPI struct {
+	SCK   machine.Pin
+	SDO   machine.Pin
+	Delay uint32
+}
+
+// Configure sets up the SCK and SDO pins as outputs and sets them low
+func (s *bbSPI) Configure() {
+	s.SCK.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	s.SDO.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	s.SCK.Low()
+	s.SDO.Low()
+	if s.Delay == 0 {
+		s.Delay = 1
+	}
+}
+
+// Tx matches signature of machine.SPI.Tx() and is used to send multiple bytes.
+// The r slice is ignored and no error will ever be returned.
+func (s *bbSPI) Tx(w []byte, r []byte) error {
+	s.Configure()
+	for _, b := range w {
+		s.Transfer(b)
+	}
+	return nil
+}
+
+// delay represents a quarter of the clock cycle
+func (s *bbSPI) delay() {
+	for i := uint32(0); i < s.Delay; {
+		i++
+	}
+}
+
+// Transfer matches signature of machine.SPI.Transfer() and is used to send a
+// single byte. The received data is ignored and no error will ever be returned.
+func (s *bbSPI) Transfer(b byte) (byte, error) {
+	for i := uint8(0); i < 8; i++ {
+
+		// half clock cycle high to start
+		s.SCK.High()
+		s.delay()
+
+		// write the value to SDO (MSB first)
+		if b&(1<<(7-i)) == 0 {
+			s.SDO.Low()
+		} else {
+			s.SDO.High()
+		}
+		s.delay()
+
+		// half clock cycle low
+		s.SCK.Low()
+		s.delay()
+
+		// for actual SPI would try to read the SDI value here
+		s.delay()
+	}
+
+	return 0, nil
+}

at24cx/at24cx.go

@@ -6,13 +6,14 @@ package at24cx // import "tinygo.org/x/drivers/at24cx"
 
 import (
 	"errors"
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 // Device wraps an I2C connection to a DS3231 device.
 type Device struct {
-	bus               machine.I2C
+	bus               drivers.I2C
 	Address           uint16
 	pageSize          uint16
 	currentRAMAddress uint16
@@ -30,7 +31,7 @@ type Config struct {
 // configured.
 //
 // This function only creates the Device object, it does not touch the device.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus:     bus,
 		Address: Address,

bh1750/bh1750.go

@@ -8,7 +8,7 @@ package bh1750 // import "tinygo.org/x/drivers/bh1750"
 import (
 	"time"
 
-	"machine"
+	"tinygo.org/x/drivers"
 )
 
 // SamplingMode is the sampling's resolution of the measurement
@@ -16,7 +16,7 @@ type SamplingMode byte
 
 // Device wraps an I2C connection to a bh1750 device.
 type Device struct {
-	bus     machine.I2C
+	bus     drivers.I2C
 	Address uint16
 	mode    SamplingMode
 }
@@ -25,7 +25,7 @@ type Device struct {
 // configured.
 //
 // This function only creates the Device object, it does not touch the device.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus:     bus,
 		Address: Address,

blinkm/blinkm.go

@@ -1,15 +1,14 @@
 // Package blinkm implements a driver for the BlinkM I2C RGB LED.
 //
 // Datasheet: http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf
+//
 package blinkm // import "tinygo.org/x/drivers/blinkm"
 
-import (
-	"machine"
-)
+import "tinygo.org/x/drivers"
 
 // Device wraps an I2C connection to a BlinkM device.
 type Device struct {
-	bus     machine.I2C
+	bus     drivers.I2C
 	Address uint16
 }
 
@@ -17,7 +16,7 @@ type Device struct {
 // configured.
 //
 // This function only creates the Device object, it does not touch the device.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{bus, Address}
 }
 

bme280/bme280.go

@@ -7,8 +7,9 @@
 package bme280
 
 import (
-	"machine"
 	"math"
+
+	"tinygo.org/x/drivers"
 )
 
 // calibrationCoefficients reads at startup and stores the calibration coefficients
@@ -35,7 +36,7 @@ type calibrationCoefficients struct {
 
 // Device wraps an I2C connection to a BME280 device.
 type Device struct {
-	bus                     machine.I2C
+	bus                     drivers.I2C
 	Address                 uint16
 	calibrationCoefficients calibrationCoefficients
 }
@@ -44,7 +45,7 @@ type Device struct {
 // configured.
 //
 // This function only creates the Device object, it does not touch the device.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus:     bus,
 		Address: Address,
@@ -112,7 +113,7 @@ func (d *Device) Reset() {
 	d.bus.WriteRegister(uint8(d.Address), CMD_RESET, []byte{0xB6})
 }
 
-// ReadTemperature returns the temperature in celsius milli degrees (ºC/1000)
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
 func (d *Device) ReadTemperature() (int32, error) {
 	data, err := d.readData()
 	if err != nil {

bmi160/bmi160.go

@@ -0,0 +1,201 @@
+package bmi160
+
+import "machine"
+
+import "time"
+
+// DeviceSPI is the SPI interface to a BMI160 accelerometer/gyroscope. There is
+// also an I2C interface, but it is not yet supported.
+type DeviceSPI struct {
+	// Chip select pin
+	CSB machine.Pin
+
+	// SPI bus (requires chip select to be usable).
+	Bus machine.SPI
+}
+
+// NewSPI returns a new device driver. The pin and SPI interface are not
+// touched, provide a fully configured SPI object and call Configure to start
+// using this device.
+func NewSPI(csb machine.Pin, spi machine.SPI) *DeviceSPI {
+	return &DeviceSPI{
+		CSB: csb, // chip select
+		Bus: spi,
+	}
+}
+
+// Configure configures the BMI160 for use. It configures the CSB pin and
+// configures the BMI160, but it does not configure the SPI interface (it is
+// assumed to be up and running).
+func (d *DeviceSPI) Configure() error {
+	d.CSB.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	d.CSB.High()
+
+	// The datasheet recommends doing a register read from address 0x7F to get
+	// SPI communication going:
+	// > If CSB sees a rising edge after power-up, the BMI160 interface switches
+	// > to SPI until a reset or the next power-up occurs. Therefore, a CSB
+	// > rising edge is needed before starting the SPI communication. Hence, it
+	// > is recommended to perform a SPI single read access to the ADDRESS 0x7F
+	// > before the actual communication in order to use the SPI interface.
+	d.readRegister(0x7F)
+
+	// Power up the accelerometer. 0b0001_00nn is the command format, with 0b01
+	// indicating normal mode.
+	d.runCommand(0b0001_0001)
+
+	// Power up the gyroscope. 0b0001_01nn is the command format, with 0b01
+	// indicating normal mode.
+	d.runCommand(0b0001_0101)
+
+	// Wait until the device is fully initialized. Even after the command has
+	// finished, the gyroscope may not be fully powered on. Therefore, wait
+	// until we get an expected value.
+	// This takes 30ms or so.
+	for {
+		// Wait for the acc_pmu_status and gyr_pmu_status to both be 0b01.
+		if d.readRegister(reg_PMU_STATUS) == 0b0001_0100 {
+			break
+		}
+	}
+
+	return nil
+}
+
+// Connected check whether the device appears to be properly connected. It reads
+// the CHIPID, which must be 0xD1 for the BMI160.
+func (d *DeviceSPI) Connected() bool {
+	return d.readRegister(reg_CHIPID) == 0xD1
+}
+
+// Reset restores the device to the state after power up. This can be useful to
+// easily disable the accelerometer and gyroscope to reduce current consumption.
+func (d *DeviceSPI) Reset() error {
+	d.runCommand(0xB6) // softreset
+	return nil
+}
+
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
+func (d *DeviceSPI) ReadTemperature() (temperature int32, err error) {
+	data := []byte{0x80 | reg_TEMPERATURE_0, 0, 0}
+	d.CSB.Low()
+	err = d.Bus.Tx(data, data)
+	d.CSB.High()
+	if err != nil {
+		return
+	}
+	rawTemperature := int16(uint16(data[1]) | uint16(data[2])<<8)
+	// 0x0000 is 23°C
+	// 0x7fff is ~87°C
+	// We use 0x8000 instead of 0x7fff to make the formula easier. The result
+	// should be near identical and shouldn't affect the result too much (the
+	// temperature sensor has an offset of around 2°C so isn't very reliable).
+	// So the formula is as follows:
+	// 1. Scale from 0x0000..0x8000 to 0..(87-23).
+	//    rawTemperature * (87-23) / 0x8000
+	// 2. Convert to centidegrees.
+	//    rawTemperature * 1000 * (87-23) / 0x8000
+	// 3. Add 23°C offset.
+	//    rawTemperature * 1000 * (87-23) / 0x8000 + 23000
+	// 4. Simplify.
+	//    rawTemperature * 1000 * 64 / 0x8000 + 23000
+	//    rawTemperature * 64000 / 0x8000 + 23000
+	//    rawTemperature * 125 / 64 + 23000
+	temperature = int32(rawTemperature)*125/64 + 23000
+	return
+}
+
+// ReadAcceleration reads the current acceleration from the device and returns
+// it in µg (micro-gravity). When one of the axes is pointing straight to Earth
+// and the sensor is not moving the returned value will be around 1000000 or
+// -1000000.
+func (d *DeviceSPI) ReadAcceleration() (x int32, y int32, z int32, err error) {
+	data := []byte{0x80 | reg_ACC_XL, 0, 0, 0, 0, 0, 0}
+	d.CSB.Low()
+	err = d.Bus.Tx(data, data)
+	d.CSB.High()
+	if err != nil {
+		return
+	}
+	// Now do two things:
+	// 1. merge the two values to a 16-bit number (and cast to a 32-bit integer)
+	// 2. scale the value to bring it in the -1000000..1000000 range.
+	//    This is done with a trick. What we do here is essentially multiply by
+	//    1000000 and divide by 16384 to get the original scale, but to avoid
+	//    overflow we do it at 1/64 of the value:
+	//      1000000 / 64 = 15625
+	//      16384   / 64 = 256
+	x = int32(int16(uint16(data[1])|uint16(data[2])<<8)) * 15625 / 256
+	y = int32(int16(uint16(data[3])|uint16(data[4])<<8)) * 15625 / 256
+	z = int32(int16(uint16(data[5])|uint16(data[6])<<8)) * 15625 / 256
+	return
+}
+
+// ReadRotation reads the current rotation from the device and returns it in
+// µ°/s (micro-degrees/sec). This means that if you were to do a complete
+// rotation along one axis and while doing so integrate all values over time,
+// you would get a value close to 360000000.
+func (d *DeviceSPI) ReadRotation() (x int32, y int32, z int32, err error) {
+	data := []byte{0x80 | reg_GYR_XL, 0, 0, 0, 0, 0, 0}
+	d.CSB.Low()
+	err = d.Bus.Tx(data, data)
+	d.CSB.High()
+	if err != nil {
+		return
+	}
+	// First the value is converted from a pair of bytes to a signed 16-bit
+	// value and then to a signed 32-bit value to avoid integer overflow.
+	// Then the value is scaled to µ°/s (micro-degrees per second).
+	// The default is 2000°/s full scale range for -32768..32767.
+	// The formula works as follows (taking X as an example):
+	// 1. Scale from 32768 to 2000. This means that it is in °/s units.
+	//    rawX * 2000 / 32768
+	// 2. Scale to µ°/s by multiplying by 1e6.
+	//    rawX * 1e6 * 2000 / 32768
+	// 3. Simplify.
+	//    rawX * 2e9 / 32768
+	//    rawX * 1953125 / 32
+	rawX := int32(int16(uint16(data[1]) | uint16(data[2])<<8))
+	rawY := int32(int16(uint16(data[3]) | uint16(data[4])<<8))
+	rawZ := int32(int16(uint16(data[5]) | uint16(data[6])<<8))
+	x = int32(int64(rawX) * 1953125 / 32)
+	y = int32(int64(rawY) * 1953125 / 32)
+	z = int32(int64(rawZ) * 1953125 / 32)
+	return
+}
+
+// runCommand runs a BMI160 command through the CMD register. It waits for the
+// command to complete before returning.
+func (d *DeviceSPI) runCommand(command uint8) {
+	d.writeRegister(reg_CMD, command)
+	for {
+		response := d.readRegister(reg_CMD)
+		if response == 0 {
+			return // command was completed
+		}
+	}
+}
+
+// readRegister reads from a single BMI160 register. It should only be used for
+// single register reads, not for reading multiple registers at once.
+func (d *DeviceSPI) readRegister(address uint8) uint8 {
+	// I don't know why but it appears necessary to sleep for a bit here.
+	time.Sleep(time.Millisecond)
+
+	data := []byte{0x80 | address, 0}
+	d.CSB.Low()
+	d.Bus.Tx(data, data)
+	d.CSB.High()
+	return data[1]
+}
+
+// writeRegister writes a single byte BMI160 register. It should only be used
+// for writing to a single register.
+func (d *DeviceSPI) writeRegister(address, data uint8) {
+	// I don't know why but it appears necessary to sleep for a bit here.
+	time.Sleep(time.Millisecond)
+
+	d.CSB.Low()
+	d.Bus.Tx([]byte{address, data}, []byte{0, 0})
+	d.CSB.High()
+}

bmi160/registers.go

@@ -0,0 +1,44 @@
+package bmi160
+
+const (
+	reg_CHIPID        = 0x00
+	reg_ERR_REG       = 0x02
+	reg_PMU_STATUS    = 0x03
+	reg_MAG_XL        = 0x04
+	reg_MAG_XH        = 0x05
+	reg_MAG_YL        = 0x06
+	reg_MAG_YH        = 0x07
+	reg_MAG_ZL        = 0x08
+	reg_MAG_ZH        = 0x09
+	reg_RHALL_L       = 0x0A
+	reg_RHALL_H       = 0x0B
+	reg_GYR_XL        = 0x0C
+	reg_GYR_XH        = 0x0D
+	reg_GYR_YL        = 0x0E
+	reg_GYR_YH        = 0x0F
+	reg_GYR_ZL        = 0x10
+	reg_GYR_ZH        = 0x11
+	reg_ACC_XL        = 0x12
+	reg_ACC_XH        = 0x13
+	reg_ACC_YL        = 0x14
+	reg_ACC_YH        = 0x15
+	reg_ACC_ZL        = 0x16
+	reg_ACC_ZH        = 0x17
+	reg_SENSORTIME_0  = 0x18
+	reg_SENSORTIME_1  = 0x19
+	reg_SENSORTIME_2  = 0x1A
+	reg_STATUS        = 0x1B
+	reg_INT_STATUS_0  = 0x1C
+	reg_INT_STATUS_1  = 0x1D
+	reg_INT_STATUS_2  = 0x1E
+	reg_INT_STATUS_3  = 0x1F
+	reg_TEMPERATURE_0 = 0x20
+	reg_TEMPERATURE_1 = 0x21
+	reg_FIFO_LENGTH_0 = 0x22
+	reg_FIFO_LENGTH_1 = 0x23
+	reg_FIFO_DATA     = 0x24
+
+	// ...
+
+	reg_CMD = 0x7E
+)

bmp180/bmp180.go

@@ -9,7 +9,7 @@ package bmp180 // import "tinygo.org/x/drivers/bmp180"
 import (
 	"time"
 
-	"machine"
+	"tinygo.org/x/drivers"
 )
 
 // OversamplingMode is the oversampling ratio of the pressure measurement.
@@ -32,7 +32,7 @@ type calibrationCoefficients struct {
 
 // Device wraps an I2C connection to a BMP180 device.
 type Device struct {
-	bus                     machine.I2C
+	bus                     drivers.I2C
 	Address                 uint16
 	mode                    OversamplingMode
 	calibrationCoefficients calibrationCoefficients
@@ -43,7 +43,7 @@ type Device struct {
 //
 // This function only creates the Device object, it does not initialize the device.
 // You must call Configure() first in order to use the device itself.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus:     bus,
 		Address: Address,
@@ -80,7 +80,7 @@ func (d *Device) Configure() {
 	d.calibrationCoefficients.md = readInt(data[20], data[21])
 }
 
-// ReadTemperature returns the temperature in celsius milli degrees (ºC/1000).
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
 func (d *Device) ReadTemperature() (temperature int32, err error) {
 	rawTemp, err := d.rawTemp()
 	if err != nil {
@@ -125,7 +125,7 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 }
 
 // rawTemp returns the sensor's raw values of the temperature
-func (d *Device) rawTemp() (int16, error) {
+func (d *Device) rawTemp() (int32, error) {
 	d.bus.WriteRegister(uint8(d.Address), REG_CTRL, []byte{CMD_TEMP})
 	time.Sleep(5 * time.Millisecond)
 	data := make([]byte, 2)
@@ -133,12 +133,12 @@ func (d *Device) rawTemp() (int16, error) {
 	if err != nil {
 		return 0, err
 	}
-	return readInt(data[0], data[1]), nil
+	return int32(uint16(data[0])<<8 | uint16(data[1])), nil
 }
 
 // calculateB5 calculates intermediate value B5 as per page 15 of datasheet
-func (d *Device) calculateB5(rawTemp int16) int32 {
-	x1 := (int32(rawTemp) - int32(d.calibrationCoefficients.ac6)) * int32(d.calibrationCoefficients.ac5) >> 15
+func (d *Device) calculateB5(rawTemp int32) int32 {
+	x1 := (rawTemp - int32(d.calibrationCoefficients.ac6)) * int32(d.calibrationCoefficients.ac5) >> 15
 	x2 := int32(d.calibrationCoefficients.mc) << 11 / (x1 + int32(d.calibrationCoefficients.md))
 	return x1 + x2
 }

bmp280/bmp280.go

@@ -0,0 +1,244 @@
+package bmp280
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+// OversamplingMode is the oversampling ratio of the temperature or pressure measurement.
+type Oversampling uint
+
+// Mode is the Power Mode.
+type Mode uint
+
+// Standby is the inactive period between the reads when the sensor is in normal power mode.
+type Standby uint
+
+// Filter unwanted changes in measurement caused by external (environmental) or internal changes (IC).
+type Filter uint
+
+// Device wraps an I2C connection to a BMP280 device.
+type Device struct {
+	bus         drivers.I2C
+	Address     uint16
+	cali        calibrationCoefficients
+	Temperature Oversampling
+	Pressure    Oversampling
+	Mode        Mode
+	Standby     Standby
+	Filter      Filter
+}
+
+type calibrationCoefficients struct {
+	// Temperature compensation
+	t1 uint16
+	t2 int16
+	t3 int16
+
+	// Pressure compensation
+	p1 uint16
+	p2 int16
+	p3 int16
+	p4 int16
+	p5 int16
+	p6 int16
+	p7 int16
+	p8 int16
+	p9 int16
+}
+
+// New creates a new BMP280 connection. The I2C bus must already be
+// configured.
+//
+// This function only creates the Device object, it does not initialize the device.
+// You must call Configure() first in order to use the device itself.
+func New(bus drivers.I2C) Device {
+	return Device{
+		bus:     bus,
+		Address: Address,
+	}
+}
+
+// Connected returns whether a BMP280 has been found.
+// It does a "who am I" request and checks the response.
+func (d *Device) Connected() bool {
+	data := make([]byte, 1)
+	d.bus.ReadRegister(uint8(d.Address), REG_ID, data)
+	return data[0] == CHIP_ID
+}
+
+// Reset preforms complete power-on-reset procedure.
+// It is required to call Configure afterwards.
+func (d *Device) Reset() {
+	d.bus.WriteRegister(uint8(d.Address), REG_RESET, []byte{CMD_RESET})
+}
+
+// Configure sets up the device for communication and
+// read the calibration coefficients.
+func (d *Device) Configure(standby Standby, filter Filter, temp Oversampling, pres Oversampling, mode Mode) {
+	d.Standby = standby
+	d.Filter = filter
+	d.Temperature = temp
+	d.Pressure = pres
+	d.Mode = mode
+
+	//  Write the configuration (standby, filter, spi 3 wire)
+	config := uint(d.Standby<<5) | uint(d.Filter<<2) | 0x00
+	d.bus.WriteRegister(uint8(d.Address), REG_CONFIG, []byte{byte(config)})
+
+	// Write the control (temperature oversampling, pressure oversampling,
+	config = uint(d.Temperature<<5) | uint(d.Pressure<<2) | uint(d.Mode)
+	d.bus.WriteRegister(uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
+
+	// Read Calibration data
+	data := make([]byte, 24)
+	err := d.bus.ReadRegister(uint8(d.Address), REG_CALI, data)
+	if err != nil {
+		return
+	}
+
+	// Datasheet: 3.11.2 Trimming parameter readout
+	d.cali.t1 = readUintLE(data[0], data[1])
+	d.cali.t2 = readIntLE(data[2], data[3])
+	d.cali.t3 = readIntLE(data[4], data[5])
+
+	d.cali.p1 = readUintLE(data[6], data[7])
+	d.cali.p2 = readIntLE(data[8], data[9])
+	d.cali.p3 = readIntLE(data[10], data[11])
+	d.cali.p4 = readIntLE(data[12], data[13])
+	d.cali.p5 = readIntLE(data[14], data[15])
+	d.cali.p6 = readIntLE(data[16], data[17])
+	d.cali.p7 = readIntLE(data[18], data[19])
+	d.cali.p8 = readIntLE(data[20], data[21])
+	d.cali.p9 = readIntLE(data[22], data[23])
+}
+
+// PrintCali prints the Calibration information.
+func (d *Device) PrintCali() {
+	println("T1:", d.cali.t1)
+	println("T2:", d.cali.t2)
+	println("T3:", d.cali.t3)
+
+	println("P1:", d.cali.p1)
+	println("P2:", d.cali.p2)
+	println("P3:", d.cali.p3)
+	println("P4:", d.cali.p4)
+	println("P5:", d.cali.p5)
+	println("P6:", d.cali.p6)
+	println("P7:", d.cali.p7)
+	println("P8:", d.cali.p8)
+	println("P9:", d.cali.p9, "\n")
+}
+
+// ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
+func (d *Device) ReadTemperature() (temperature int32, err error) {
+	data, err := d.readData(REG_TEMP, 3)
+	if err != nil {
+		return
+	}
+
+	rawTemp := convert3Bytes(data[0], data[1], data[2])
+
+	// Datasheet: 8.2 Compensation formula in 32 bit fixed point
+	// Temperature compensation
+	var1 := ((rawTemp >> 3) - int32(d.cali.t1<<1)) * int32(d.cali.t2) >> 11
+	var2 := (((rawTemp >> 4) - int32(d.cali.t1)) * ((rawTemp >> 4) - int32(d.cali.t1)) >> 12) *
+		int32(d.cali.t3) >> 14
+
+	tFine := var1 + var2
+
+	// Convert from degrees to milli degrees by multiplying by 10.
+	// Will output 30250 milli degrees celsius for 30.25 degrees celsius
+	temperature = 10 * ((tFine*5 + 128) >> 8)
+	return
+}
+
+// ReadPressure returns the pressure in milli pascals (mPa).
+func (d *Device) ReadPressure() (pressure int32, err error) {
+	// First 3 bytes are Pressure, last 3 bytes are Temperature
+	data, err := d.readData(REG_PRES, 6)
+	if err != nil {
+		return
+	}
+
+	rawTemp := convert3Bytes(data[3], data[4], data[5])
+
+	// Datasheet: 8.2 Compensation formula in 32 bit fixed point
+	// Calculate tFine (temperature), used for the Pressure compensation
+	var1 := ((rawTemp >> 3) - int32(d.cali.t1<<1)) * int32(d.cali.t2) >> 11
+	var2 := (((rawTemp >> 4) - int32(d.cali.t1)) * ((rawTemp >> 4) - int32(d.cali.t1)) >> 12) *
+		int32(d.cali.t3) >> 14
+
+	tFine := var1 + var2
+
+	rawPres := convert3Bytes(data[0], data[1], data[2])
+
+	// Datasheet: 8.2 Compensation formula in 32 bit fixed point
+	// Pressure compensation
+	var1 = (tFine >> 1) - 64000
+	var2 = (((var1 >> 2) * (var1 >> 2)) >> 11) * int32(d.cali.p6)
+	var2 = var2 + ((var1 * int32(d.cali.p5)) << 1)
+	var2 = (var2 >> 2) + (int32(d.cali.p4) << 16)
+	var1 = (((int32(d.cali.p3) * (((var1 >> 2) * (var1 >> 2)) >> 13)) >> 3) +
+		((int32(d.cali.p2) * var1) >> 1)) >> 18
+	var1 = ((32768 + var1) * int32(d.cali.p1)) >> 15
+
+	if var1 == 0 {
+		return 0, nil
+	}
+
+	p := uint32(((1048576 - rawPres) - (var2 >> 12)) * 3125)
+	if p < 0x80000000 {
+		p = (p << 1) / uint32(var1)
+	} else {
+		p = (p / uint32(var1)) * 2
+	}
+
+	var1 = (int32(d.cali.p9) * int32(((p>>3)*(p>>3))>>13)) >> 12
+	var2 = (int32(p>>2) * int32(d.cali.p8)) >> 13
+
+	return 1000 * (int32(p) + ((var1 + var2 + int32(d.cali.p7)) >> 4)), nil
+}
+
+// readData reads n number of bytes of the specified register
+func (d *Device) readData(register int, n int) ([]byte, error) {
+	// If not in normal mode, set the mode to FORCED mode, to prevent incorrect measurements
+	// After the measurement in FORCED mode, the sensor will return to SLEEP mode
+	if d.Mode != MODE_NORMAL {
+		config := uint(d.Temperature<<5) | uint(d.Pressure<<2) | uint(MODE_FORCED)
+		d.bus.WriteRegister(uint8(d.Address), REG_CTRL_MEAS, []byte{byte(config)})
+	}
+
+	// Check STATUS register, wait if data is not available yet
+	status := make([]byte, 1)
+	for d.bus.ReadRegister(uint8(d.Address), uint8(REG_STATUS), status[0:]); status[0] != 4 && status[0] != 0; d.bus.ReadRegister(uint8(d.Address), uint8(REG_STATUS), status[0:]) {
+		time.Sleep(time.Millisecond)
+	}
+
+	// Read the requested register
+	data := make([]byte, n)
+	err := d.bus.ReadRegister(uint8(d.Address), uint8(register), data[:])
+	return data, err
+}
+
+// convert3Bytes converts three bytes to int32
+func convert3Bytes(msb byte, b1 byte, lsb byte) int32 {
+	return int32(((((uint32(msb) << 8) | uint32(b1)) << 8) | uint32(lsb)) >> 4)
+}
+
+// readUint converts two bytes to uint16
+func readUint(msb byte, lsb byte) uint16 {
+	return (uint16(msb) << 8) | uint16(lsb)
+}
+
+// readUintLE converts two little endian bytes to uint16
+func readUintLE(msb byte, lsb byte) uint16 {
+	temp := readUint(msb, lsb)
+	return (temp >> 8) | (temp << 8)
+}
+
+// readIntLE converts two little endian bytes to int16
+func readIntLE(msb byte, lsb byte) int16 {
+	return int16(readUintLE(msb, lsb))
+}

bmp280/registers.go

@@ -0,0 +1,56 @@
+// Package bmp280 provides a driver for the BMP280 digital temperature & pressure sensor by Bosch.
+//
+// Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
+package bmp280
+
+// The I2C address which this device listens to.
+const Address = 0x77
+
+// Registers
+const (
+	REG_ID        = 0xD0 // WHO_AM_I
+	REG_RESET     = 0xE0
+	REG_STATUS    = 0xF3
+	REG_CTRL_MEAS = 0xF4
+	REG_CONFIG    = 0xF5
+	REG_TEMP      = 0xFA
+	REG_PRES      = 0xF7
+	REG_CALI      = 0x88
+
+	CHIP_ID   = 0x58
+	CMD_RESET = 0xB6
+)
+
+const (
+	SAMPLING_SKIPPED Oversampling = iota
+	SAMPLING_1X
+	SAMPLING_2X
+	SAMPLING_4X
+	SAMPLING_8X
+	SAMPLING_16X
+)
+
+const (
+	MODE_SLEEP  Mode = 0x00
+	MODE_FORCED Mode = 0x01
+	MODE_NORMAL Mode = 0x03
+)
+
+const (
+	STANDBY_1MS Standby = iota
+	STANDBY_63MS
+	STANDBY_125MS
+	STANDBY_250MS
+	STANDBY_500MS
+	STANDBY_1000MS
+	STANDBY_2000MS
+	STANDBY_4000MS
+)
+
+const (
+	FILTER_OFF Filter = iota
+	FILTER_2X
+	FILTER_4X
+	FILTER_8X
+	FILTER_16X
+)

drivers.go

@@ -1,5 +1,5 @@
-// Package drivers provides a collection of hardware drivers for devices that
-// can be used together with TinyGo (https://tinygo.org).
+// Package drivers provides a collection of hardware drivers for TinyGo (https://tinygo.org)
+// for devices such as sensors and displays.
 //
 // Here is an example in TinyGo that uses the BMP180 digital barometer:
 //
@@ -9,7 +9,7 @@
 //		"time"
 //		"machine"
 //
-// 		"github.com/tinygo-org/drivers/bmp180"
+// 		"tinygo.org/x/drivers/bmp180"
 // 	)
 //
 // 	func main() {
@@ -26,7 +26,7 @@
 //
 //		for {
 //			temp, _ := sensor.ReadTemperature()
-//			println("Temperature:", float32(temp)/1000, "ºC")
+//			println("Temperature:", float32(temp)/1000, "°C")
 //
 //			pressure, _ := sensor.ReadPressure()
 //			println("Pressure", float32(pressure)/100000, "hPa")

ds1307/ds1307.go

@@ -9,18 +9,18 @@ import (
 	"errors"
 	"time"
 
-	"machine"
+	"tinygo.org/x/drivers"
 )
 
 // Device wraps an I2C connection to a DS1307 device.
 type Device struct {
-	bus         machine.I2C
+	bus         drivers.I2C
 	Address     uint8
 	AddressSRAM uint8
 }
 
 // New creates a new DS1307 connection. I2C bus must be already configured.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{bus: bus,
 		Address:     uint8(I2CAddress),
 		AddressSRAM: SRAMBeginAddres,

ds3231/ds3231.go

@@ -5,15 +5,16 @@
 package ds3231 // import "tinygo.org/x/drivers/ds3231"
 
 import (
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 type Mode uint8
 
 // Device wraps an I2C connection to a DS3231 device.
 type Device struct {
-	bus     machine.I2C
+	bus     drivers.I2C
 	Address uint16
 }
 
@@ -21,7 +22,7 @@ type Device struct {
 // configured.
 //
 // This function only creates the Device object, it does not touch the device.
-func New(bus machine.I2C) Device {
+func New(bus drivers.I2C) Device {
 	return Device{
 		bus:     bus,
 		Address: Address,

easystepper/easystepper.go

@@ -1,4 +1,4 @@
-// Simple driver to rotate a 4-wire stepper motor
+// Package easystepper provides a simple driver to rotate a 4-wire stepper motor.
 package easystepper // import "tinygo.org/x/drivers/easystepper"
 
 import (
@@ -10,47 +10,115 @@ import (
 type Device struct {
 	pins       [4]machine.Pin
 	stepDelay  int32
-	stepNumber int32
+	stepNumber uint8
 }
 
-// New returns a new easystepper driver given 4 pins numbers (not pin object),
-// number of steps and rpm
+// DualDevice holds information for controlling 2 motors
+type DualDevice struct {
+	devices [2]Device
+}
+
+// New returns a new easystepper driver given 4 pins, number of steps and rpm
 func New(pin1, pin2, pin3, pin4 machine.Pin, steps int32, rpm int32) Device {
-	pin1.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	pin2.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	pin3.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	pin4.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	return Device{
 		pins:      [4]machine.Pin{pin1, pin2, pin3, pin4},
 		stepDelay: 60000000 / (steps * rpm),
 	}
 }
 
+// Configure configures the pins of the Device
+func (d *Device) Configure() {
+	for _, pin := range d.pins {
+		pin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	}
+}
+
+// NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
+func NewDual(pin1, pin2, pin3, pin4, pin5, pin6, pin7, pin8 machine.Pin, steps int32, rpm int32) DualDevice {
+	var dual DualDevice
+	dual.devices[0] = Device{
+		pins:      [4]machine.Pin{pin1, pin2, pin3, pin4},
+		stepDelay: 60000000 / (steps * rpm),
+	}
+	dual.devices[1] = Device{
+		pins:      [4]machine.Pin{pin5, pin6, pin7, pin8},
+		stepDelay: 60000000 / (steps * rpm),
+	}
+	return dual
+}
+
+// Configure configures the pins of the DualDevice
+func (d *DualDevice) Configure() {
+	d.devices[0].Configure()
+	d.devices[1].Configure()
+}
+
 // Move rotates the motor the number of given steps
 // (negative steps will rotate it the opposite direction)
 func (d *Device) Move(steps int32) {
 	direction := steps > 0
 	if steps < 0 {
-		steps = -steps - d.stepNumber
-	} else {
-		steps += d.stepNumber
+		steps = -steps
 	}
-	var stepN int8
+	steps += int32(d.stepNumber)
 	var s int32
-	for s = d.stepNumber; s < steps; s++ {
+	d.stepMotor(d.stepNumber)
+	for s = int32(d.stepNumber); s < steps; s++ {
 		time.Sleep(time.Duration(d.stepDelay) * time.Microsecond)
-		if direction {
-			stepN = int8(s % 4)
-		} else {
-			stepN = int8((s + 2*(s%2)) % 4)
-		}
-		d.stepMotor(stepN)
+		d.moveDirectionSteps(direction, s)
 	}
-	d.stepNumber = int32(stepN)
+}
+
+// Off turns off all motor pins
+func (d *Device) Off() {
+	for _, pin := range d.pins {
+		pin.Low()
+	}
+}
+
+// Move rotates the motors the number of given steps
+// (negative steps will rotate it the opposite direction)
+func (d *DualDevice) Move(stepsA, stepsB int32) {
+	min := uint8(1)
+	max := uint8(0)
+	var directions [2]bool
+	var minStep int32
+
+	directions[0] = stepsA > 0
+	directions[1] = stepsB > 0
+	if stepsA < 0 {
+		stepsA = -stepsA
+	}
+	if stepsB < 0 {
+		stepsB = -stepsB
+	}
+	if stepsB > stepsA {
+		stepsA, stepsB = stepsB, stepsA
+		max, min = min, max
+	}
+	d.devices[0].stepMotor(d.devices[0].stepNumber)
+	d.devices[1].stepMotor(d.devices[1].stepNumber)
+	stepsA += int32(d.devices[max].stepNumber)
+	minStep = int32(d.devices[min].stepNumber)
+	for s := int32(d.devices[max].stepNumber); s < stepsA; s++ {
+		time.Sleep(time.Duration(d.devices[0].stepDelay) * time.Microsecond)
+		d.devices[max].moveDirectionSteps(directions[max], s)
+
+		if ((s * stepsB) / stepsA) > minStep {
+			minStep++
+			d.devices[min].moveDirectionSteps(directions[min], minStep)
+		}
+	}
+}
+
+// Off turns off all motor pins
+func (d *DualDevice) Off() {
+	d.devices[0].Off()
+	d.devices[1].Off()
 }
 
 // stepMotor changes the pins' state to the correct step
-func (d *Device) stepMotor(step int8) {
+func (d *Device) stepMotor(step uint8) {
 	switch step {
 	case 0:
 		d.pins[0].High()
@@ -77,4 +145,16 @@ func (d *Device) stepMotor(step int8) {
 		d.pins[3].High()
 		break
 	}
+	d.stepNumber = step
+}
+
+// moveDirectionSteps uses the direction to calculate the correct step and change the motor to it.
+// Direction true: 0, 1, 2, 3, 0, 1, 2, ...
+// Direction false: 0, 3, 2, 1, 0, 3, 2, ...
+func (d *Device) moveDirectionSteps(direction bool, step int32) {
+	if direction {
+		d.stepMotor(uint8(step % 4))
+	} else {
+		d.stepMotor(uint8((step + 2*(step%2)) % 4))
+	}
 }

espat/espat.go

@@ -19,10 +19,13 @@
 package espat // import "tinygo.org/x/drivers/espat"
 
 import (
+	"errors"
 	"machine"
 	"strconv"
 	"strings"
 	"time"
+
+	"tinygo.org/x/drivers/net"
 )
 
 // Device wraps UART connection to the ESP8266/ESP32.
@@ -47,6 +50,7 @@ func New(b machine.UART) *Device {
 // Configure sets up the device for communication.
 func (d Device) Configure() {
 	ActiveDevice = &d
+	net.ActiveDevice = ActiveDevice
 }
 
 // Connected checks if there is communication with the ESP8266/ESP32.
@@ -54,11 +58,11 @@ func (d *Device) Connected() bool {
 	d.Execute(Test)
 
 	// handle response here, should include "OK"
-	r := d.Response(100)
-	if strings.Contains(string(r), "OK") {
-		return true
+	_, err := d.Response(100)
+	if err != nil {
+		return false
 	}
-	return false
+	return true
 }
 
 // Write raw bytes to the UART.
@@ -72,7 +76,7 @@ func (d *Device) Read(b []byte) (n int, err error) {
 }
 
 // how long in milliseconds to pause after sending AT commands
-const pause = 100
+const pause = 300
 
 // Execute sends an AT command to the ESP8266/ESP32.
 func (d Device) Execute(cmd string) error {
@@ -97,7 +101,11 @@ func (d Device) Set(cmd, params string) error {
 // Version returns the ESP8266/ESP32 firmware version info.
 func (d Device) Version() []byte {
 	d.Execute(Version)
-	return d.Response(100)
+	r, err := d.Response(100)
+	if err != nil {
+		return []byte("unknown")
+	}
+	return r
 }
 
 // Echo sets the ESP8266/ESP32 echo setting.
@@ -122,7 +130,7 @@ func (d Device) Reset() {
 // ReadSocket returns the data that has already been read in from the responses.
 func (d *Device) ReadSocket(b []byte) (n int, err error) {
 	// make sure no data in buffer
-	d.Response(100)
+	d.Response(300)
 
 	count := len(b)
 	if len(b) >= len(d.socketdata) {
@@ -142,118 +150,73 @@ func (d *Device) ReadSocket(b []byte) (n int, err error) {
 
 // Response gets the next response bytes from the ESP8266/ESP32.
 // The call will retry for up to timeout milliseconds before returning nothing.
-func (d *Device) Response(timeout int) []byte {
-	var i int
-	pause := 10 // pause to wait for 10 ms
+func (d *Device) Response(timeout int) ([]byte, error) {
+	// read data
+	var size int
+	var start, end int
+	pause := 100 // pause to wait for 100 ms
 	retries := timeout / pause
 
-	header := make([]byte, 2)
 	for {
-		for d.bus.Buffered() > 0 {
-			// get the first 2 bytes
-			header[0], _ = d.bus.ReadByte()
-			header[1], _ = d.bus.ReadByte()
+		size = d.bus.Buffered()
 
-			if d.isLeadingCRLF(header) {
-				// skip it
-				header[0], _ = d.bus.ReadByte()
-				header[1], _ = d.bus.ReadByte()
+		if size > 0 {
+			end += size
+			d.bus.Read(d.response[start:end])
+
+			// if "+IPD" then read socket data
+			if strings.Contains(string(d.response[:end]), "+IPD") {
+				// handle socket data
+				return nil, d.parseIPD(end)
 			}
 
-			if d.isIPD(header) {
-				// is socket data packet
-				d.parseIPD()
-			} else {
-				// no, so put into response
-				d.response[i] = header[0]
-				i++
-				d.response[i] = header[1]
-				i++
+			// if "OK" then the command worked
+			if strings.Contains(string(d.response[:end]), "OK") {
+				return d.response[start:end], nil
 			}
 
-			// read the rest of normal command response
-			for d.bus.Buffered() > 0 {
-				data, err := d.bus.ReadByte()
-				if err != nil {
-					return nil
-				}
-				d.response[i] = data
-				i++
+			// if "Error" then the command failed
+			if strings.Contains(string(d.response[:end]), "ERROR") {
+				return d.response[start:end], errors.New("response error:" + string(d.response[start:end]))
 			}
+
+			// if anything else, then keep reading data in?
+			start = end
 		}
+
+		// wait longer?
 		retries--
 		if retries == 0 {
-			break
+			return nil, errors.New("response timeout error:" + string(d.response[start:end]))
 		}
 
-		// pause to make sure is no more data to be read
 		time.Sleep(time.Duration(pause) * time.Millisecond)
 	}
-	return d.response[:i]
 }
 
-func (d *Device) isLeadingCRLF(b []byte) bool {
-	if len(b) < 2 {
-		return false
-	}
-	if b[0] == 13 && b[1] == 10 {
-		return true
-	}
-	return false
-}
+func (d *Device) parseIPD(end int) error {
+	// find the "+IPD," to get length
+	s := strings.Index(string(d.response[:end]), "+IPD,")
 
-func (d *Device) isIPD(b []byte) bool {
-	if len(b) < 2 {
-		return false
-	}
-	if b[0] == '+' && b[1] == 'I' {
-		return true
-	}
-	return false
-}
+	// find the ":"
+	e := strings.Index(string(d.response[:end]), ":")
 
-func (d *Device) parseIPD() bool {
-	data, _ := d.bus.ReadByte()
-	if data != 'P' {
-		// error
-		return false
-	}
-	data, _ = d.bus.ReadByte()
-	if data != 'D' {
-		// error
-		return false
-	}
-	data, _ = d.bus.ReadByte()
-	if data != ',' {
-		// error
-		return false
-	}
+	// find the data length
+	val := string(d.response[s+5 : e])
 
-	// get the expected data length
-	// skip remaining header up to the ":"
-	buf := []byte{}
-	data, _ = d.bus.ReadByte()
-	for data != ':' {
-		// put into the buffer with int value here
-		buf = append(buf, data)
-
-		// read next value
-		data, _ = d.bus.ReadByte()
-	}
-
-	val := string(buf)
-	count, err := strconv.Atoi(val)
+	// TODO: verify count
+	_, err := strconv.Atoi(val)
 	if err != nil {
 		// not expected data here. what to do?
-		return false
+		return err
 	}
 
 	// load up the socket data
-	// only read the expected amount of data
-	for m := 0; m < count; m++ {
-		data, _ = d.bus.ReadByte()
-		d.socketdata = append(d.socketdata, data)
-	}
-
-	return true
+	d.socketdata = append(d.socketdata, d.response[e+1:end]...)
+	return nil
+}
+
+// IsSocketDataAvailable returns of there is socket data available
+func (d *Device) IsSocketDataAvailable() bool {
+	return len(d.socketdata) > 0 || d.bus.Buffered() > 0
 }

espat/tcp.go

@@ -17,7 +17,14 @@ const (
 // GetDNS returns the IP address for a domain name.
 func (d *Device) GetDNS(domain string) (string, error) {
 	d.Set(TCPDNSLookup, "\""+domain+"\"")
-	r := strings.Split(string(d.Response(1000)), ":")
+	resp, err := d.Response(1000)
+	if err != nil {
+		return "", err
+	}
+	if !strings.Contains(string(resp), ":") {
+		return "", errors.New("GetDNS error:" + string(resp))
+	}
+	r := strings.Split(string(resp), ":")
 	if len(r) != 2 {
 		return "", errors.New("Invalid domain lookup result")
 	}
@@ -30,24 +37,30 @@ func (d *Device) GetDNS(domain string) (string, error) {
 func (d *Device) ConnectTCPSocket(addr, port string) error {
 	protocol := "TCP"
 	val := "\"" + protocol + "\",\"" + addr + "\"," + port + ",120"
-	d.Set(TCPConnect, val)
-	r := d.Response(1000)
-	if strings.Contains(string(r), "OK") {
-		return nil
+	err := d.Set(TCPConnect, val)
+	if err != nil {
+		return err
 	}
-	return errors.New("ConnectTCPSocket error:" + string(r))
+	_, e := d.Response(3000)
+	if e != nil {
+		return e
+	}
+	return nil
 }
 
 // ConnectUDPSocket creates a new UDP connection for the ESP8266/ESP32.
 func (d *Device) ConnectUDPSocket(addr, sendport, listenport string) error {
 	protocol := "UDP"
 	val := "\"" + protocol + "\",\"" + addr + "\"," + sendport + "," + listenport + ",2"
-	d.Set(TCPConnect, val)
-	r := d.Response(pause)
-	if strings.Contains(string(r), "OK") {
-		return nil
+	err := d.Set(TCPConnect, val)
+	if err != nil {
+		return err
 	}
-	return errors.New("ConnectUDPSocket error:" + string(r))
+	_, e := d.Response(3000)
+	if e != nil {
+		return e
+	}
+	return nil
 }
 
 // ConnectSSLSocket creates a new SSL socket connection for the ESP8266/ESP32.
@@ -57,17 +70,23 @@ func (d *Device) ConnectSSLSocket(addr, port string) error {
 	val := "\"" + protocol + "\",\"" + addr + "\"," + port + ",120"
 	d.Set(TCPConnect, val)
 	// this operation takes longer, so wait up to 6 seconds to complete.
-	r := d.Response(6000)
-	if strings.Contains(string(r), "CONNECT") {
-		return nil
+	_, err := d.Response(6000)
+	if err != nil {
+		return err
 	}
-	return errors.New("ConnectSSLSocket error:" + string(r))
+	return nil
 }
 
 // DisconnectSocket disconnects the ESP8266/ESP32 from the current TCP/UDP connection.
 func (d *Device) DisconnectSocket() error {
-	d.Execute(TCPClose)
-	d.Response(pause)
+	err := d.Execute(TCPClose)
+	if err != nil {
+		return err
+	}
+	_, e := d.Response(pause)
+	if e != nil {
+		return e
+	}
 	return nil
 }
 
@@ -76,14 +95,14 @@ func (d *Device) DisconnectSocket() error {
 func (d *Device) SetMux(mode int) error {
 	val := strconv.Itoa(mode)
 	d.Set(TCPMultiple, val)
-	d.Response(pause)
-	return nil
+	_, err := d.Response(pause)
+	return err
 }
 
 // GetMux returns the ESP8266/ESP32 current client TCP/UDP configuration for concurrent connections.
 func (d *Device) GetMux() ([]byte, error) {
 	d.Query(TCPMultiple)
-	return d.Response(pause), nil
+	return d.Response(pause)
 }
 
 // SetTCPTransferMode sets the ESP8266/ESP32 current client TCP/UDP transfer mode.
@@ -91,12 +110,12 @@ func (d *Device) GetMux() ([]byte, error) {
 func (d *Device) SetTCPTransferMode(mode int) error {
 	val := strconv.Itoa(mode)
 	d.Set(TransmissionMode, val)
-	d.Response(pause)
-	return nil
+	_, err := d.Response(pause)
+	return err
 }
 
 // GetTCPTransferMode returns the ESP8266/ESP32 current client TCP/UDP transfer mode.
-func (d *Device) GetTCPTransferMode() []byte {
+func (d *Device) GetTCPTransferMode() ([]byte, error) {
 	d.Query(TransmissionMode)
 	return d.Response(pause)
 }
@@ -108,7 +127,10 @@ func (d *Device) StartSocketSend(size int) error {
 
 	// when ">" is received, it indicates
 	// ready to receive data
-	r := d.Response(pause)
+	r, err := d.Response(2000)
+	if err != nil {
+		return err
+	}
 	if strings.Contains(string(r), ">") {
 		return nil
 	}
@@ -120,6 +142,6 @@ func (d *Device) StartSocketSend(size int) error {
 func (d *Device) EndSocketSend() error {
 	d.Write([]byte("+++"))
 
-	d.Response(pause)
-	return nil
+	_, err := d.Response(pause)
+	return err
 }

espat/wifi.go

@@ -16,7 +16,7 @@ const (
 )
 
 // GetWifiMode returns the ESP8266/ESP32 wifi mode.
-func (d *Device) GetWifiMode() []byte {
+func (d *Device) GetWifiMode() ([]byte, error) {
 	d.Query(WifiMode)
 	return d.Response(100)
 }
@@ -25,14 +25,14 @@ func (d *Device) GetWifiMode() []byte {
 func (d *Device) SetWifiMode(mode int) error {
 	val := strconv.Itoa(mode)
 	d.Set(WifiMode, val)
-	d.Response(pause)
-	return nil
+	_, err := d.Response(pause)
+	return err
 }
 
 // Wifi Client
 
 // GetConnectedAP returns the ESP8266/ESP32 is currently connected to as a client.
-func (d *Device) GetConnectedAP() []byte {
+func (d *Device) GetConnectedAP() ([]byte, error) {
 	d.Query(ConnectAP)
 	return d.Response(100)
 }
@@ -42,37 +42,43 @@ func (d *Device) GetConnectedAP() []byte {
 func (d *Device) ConnectToAP(ssid, pwd string, ws int) error {
 	val := "\"" + ssid + "\",\"" + pwd + "\""
 	d.Set(ConnectAP, val)
-	d.Response(ws * 1000)
+
+	_, err := d.Response(ws * 1000)
+	if err != nil {
+		return err
+	}
 	return nil
 }
 
 // DisconnectFromAP disconnects the ESP8266/ESP32 from the current access point.
 func (d *Device) DisconnectFromAP() error {
 	d.Execute(Disconnect)
-	d.Response(1000)
-	return nil
+	_, err := d.Response(1000)
+	return err
 }
 
 // GetClientIP returns the ESP8266/ESP32 current client IP addess when connected to an Access Point.
-func (d *Device) GetClientIP() string {
+func (d *Device) GetClientIP() (string, error) {
 	d.Query(SetStationIP)
-	return string(d.Response(100))
+	r, err := d.Response(1000)
+	return string(r), err
 }
 
 // SetClientIP sets the ESP8266/ESP32 current client IP addess when connected to an Access Point.
-func (d *Device) SetClientIP(ipaddr string) []byte {
+func (d *Device) SetClientIP(ipaddr string) error {
 	val := "\"" + ipaddr + "\""
 	d.Set(ConnectAP, val)
-	d.Response(500)
-	return nil
+	_, err := d.Response(500)
+	return err
 }
 
 // Access Point
 
 // GetAPConfig returns the ESP8266/ESP32 current configuration when acting as an Access Point.
-func (d *Device) GetAPConfig() string {
+func (d *Device) GetAPConfig() (string, error) {
 	d.Query(SoftAPConfigCurrent)
-	return string(d.Response(100))
+	r, err := d.Response(100)
+	return string(r), err
 }
 
 // SetAPConfig sets the ESP8266/ESP32 current configuration when acting as an Access Point.
@@ -83,35 +89,38 @@ func (d *Device) SetAPConfig(ssid, pwd string, ch, security int) error {
 	ecnval := strconv.Itoa(security)
 	val := "\"" + ssid + "\",\"" + pwd + "\"," + chval + "," + ecnval
 	d.Set(SoftAPConfigCurrent, val)
-	d.Response(1000)
-	return nil
+	_, err := d.Response(1000)
+	return err
 }
 
 // GetAPClients returns the ESP8266/ESP32 current clients when acting as an Access Point.
-func (d *Device) GetAPClients() string {
+func (d *Device) GetAPClients() (string, error) {
 	d.Query(ListConnectedIP)
-	return string(d.Response(100))
+	r, err := d.Response(100)
+	return string(r), err
 }
 
 // GetAPIP returns the ESP8266/ESP32 current IP addess when configured as an Access Point.
-func (d *Device) GetAPIP() string {
+func (d *Device) GetAPIP() (string, error) {
 	d.Query(SetSoftAPIPCurrent)
-	return string(d.Response(100))
+	r, err := d.Response(100)
+	return string(r), err
 }
 
 // SetAPIP sets the ESP8266/ESP32 current IP addess when configured as an Access Point.
 func (d *Device) SetAPIP(ipaddr string) error {
 	val := "\"" + ipaddr + "\""
 	d.Set(SetSoftAPIPCurrent, val)
-	d.Response(500)
-	return nil
+	_, err := d.Response(500)
+	return err
 }
 
 // GetAPConfigFlash returns the ESP8266/ESP32 current configuration acting as an Access Point
 // from flash storage. These settings are those used after a reset.
-func (d *Device) GetAPConfigFlash() string {
+func (d *Device) GetAPConfigFlash() (string, error) {
 	d.Query(SoftAPConfigFlash)
-	return string(d.Response(100))
+	r, err := d.Response(100)
+	return string(r), err
 }
 
 // SetAPConfigFlash sets the ESP8266/ESP32 current configuration acting as an Access Point,
@@ -123,15 +132,16 @@ func (d *Device) SetAPConfigFlash(ssid, pwd string, ch, security int) error {
 	ecnval := strconv.Itoa(security)
 	val := "\"" + ssid + "\",\"" + pwd + "\"," + chval + "," + ecnval
 	d.Set(SoftAPConfigFlash, val)
-	d.Response(1000)
-	return nil
+	_, err := d.Response(1000)
+	return err
 }
 
 // GetAPIPFlash returns the ESP8266/ESP32 IP address as saved to flash storage.
 // This is the IP address that will be used after a reset.
-func (d *Device) GetAPIPFlash() string {
+func (d *Device) GetAPIPFlash() (string, error) {
 	d.Query(SetSoftAPIPFlash)
-	return string(d.Response(100))
+	r, err := d.Response(100)
+	return string(r), err
 }
 
 // SetAPIPFlash sets the ESP8266/ESP32 current IP addess when configured as an Access Point.
@@ -139,6 +149,6 @@ func (d *Device) GetAPIPFlash() string {
 func (d *Device) SetAPIPFlash(ipaddr string) error {
 	val := "\"" + ipaddr + "\""
 	d.Set(SetSoftAPIPFlash, val)
-	d.Response(500)
-	return nil
+	_, err := d.Response(500)
+	return err
 }

examples/adt7410/main.go

@@ -0,0 +1,27 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/adt7410"
+)
+
+var (
+	i2c    = &machine.I2C0
+	sensor = adt7410.New(i2c)
+)
+
+func main() {
+
+	i2c.Configure(machine.I2CConfig{Frequency: machine.TWI_FREQ_400KHZ})
+	sensor.Configure()
+
+	for {
+		temp := sensor.ReadTempF()
+		fmt.Printf("temperature: %f\r\n", temp)
+		time.Sleep(time.Second)
+	}
+
+}

examples/amg88xx/main.go

@@ -0,0 +1,56 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+
+	"tinygo.org/x/drivers/st7735"
+
+	"tinygo.org/x/drivers/amg88xx"
+)
+
+func main() {
+
+	machine.SPI1.Configure(machine.SPIConfig{
+		SCK:       machine.SPI1_SCK_PIN,
+		SDO:       machine.SPI1_SDO_PIN,
+		SDI:       machine.SPI1_SDI_PIN,
+		Frequency: 8000000,
+	})
+	machine.I2C0.Configure(machine.I2CConfig{SCL: machine.SCL_PIN, SDA: machine.SDA_PIN})
+
+	display := st7735.New(machine.SPI1, machine.TFT_RST, machine.TFT_DC, machine.TFT_CS, machine.TFT_LITE)
+	display.Configure(st7735.Config{
+		Rotation: st7735.ROTATION_90,
+	})
+	display.FillScreen(color.RGBA{0, 0, 0, 255})
+
+	camera := amg88xx.New(machine.I2C0)
+	camera.Configure(amg88xx.Config{})
+
+	var data [64]int16
+	var value int16
+	for {
+		// get the values of the sensor in millicelsius
+		camera.ReadPixels(&data)
+
+		for j := int16(0); j < 8; j++ {
+			for i := int16(0); i < 8; i++ {
+				value = data[63-(i+j*8)]
+				// treat anything below 18°C as 18°C
+				if value < 18000 {
+					value = 0
+				} else {
+					value = (value - 18000) / 36
+					// our color array only have 433 values, avoid getting a value that doesn't exist
+					if value > 432 {
+						value = 432
+					}
+				}
+				// show the image on the PyBadge's display
+				display.FillRectangle(16+i*16, j*16, 16, 16, colors[value])
+			}
+		}
+	}
+
+}

examples/apa102/itsybitsy-m0/main.go

@@ -0,0 +1,84 @@
+// This example demostrates how to control the "Dotstar" (APA102) LED included
+// on the Adafruit Itsy Bitsy M0 board.  It implements a "rainbow effect" based
+// on the following example:
+// https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/master/CircuitPython_Essentials/CircuitPython_Internal_RGB_LED_rainbow.py
+package main
+
+import (
+	"image/color"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/apa102"
+)
+
+var (
+	apa apa102.Device
+
+	led   = machine.PWM{machine.LED}
+	leds  = make([]color.RGBA, 1)
+	wheel = &Wheel{Brightness: 0x10}
+)
+
+func init() {
+
+	// APA102 on Itsy Bitsy is connected to pins that require a software-based
+	// SPI implementation.
+	apa = apa102.NewSoftwareSPI(machine.PA00, machine.PA01, 1)
+
+	// Configure the regular on-board LED for PWM fading
+	machine.InitPWM()
+	led.Configure()
+
+}
+
+func main() {
+
+	// We'll fade the on-board LED in a goroutine to show/ensure that the APA102
+	// works fine with the scheduler enabled.  Comment this out to test this code
+	// with the scheduler disabled.
+	go func() {
+		for i, brightening := uint8(0), false; ; i++ {
+			if i == 0 {
+				brightening = !brightening
+				continue
+			}
+			var brightness uint16 = uint16(i) << 8
+			if !brightening {
+				brightness = 0xFFFF - brightness
+			}
+			led.Set(brightness)
+			time.Sleep(5 * time.Millisecond)
+		}
+	}()
+
+	// Use the "wheel" function from Adafruit's example to cycle the APA102
+	for {
+		leds[0] = wheel.Next()
+		apa.WriteColors(leds)
+		time.Sleep(25 * time.Millisecond)
+	}
+
+}
+
+// Wheel is a port of Adafruit's Circuit Python example referenced above.
+type Wheel struct {
+	Brightness uint8
+	pos        uint8
+}
+
+// Next increments the internal state of the color and returns the new RGBA
+func (w *Wheel) Next() (c color.RGBA) {
+	pos := w.pos
+	if w.pos < 85 {
+		c = color.RGBA{R: 0xFF - pos*3, G: pos * 3, B: 0x0, A: w.Brightness}
+	} else if w.pos < 170 {
+		pos -= 85
+		c = color.RGBA{R: 0x0, G: 0xFF - pos*3, B: pos * 3, A: w.Brightness}
+	} else {
+		pos -= 170
+		c = color.RGBA{R: pos * 3, G: 0x0, B: 0xFF - pos*3, A: w.Brightness}
+	}
+	w.pos++
+	return
+}

examples/bme280/main.go

@@ -22,7 +22,7 @@ func main() {
 
 	for {
 		temp, _ := sensor.ReadTemperature()
-		println("Temperature:", strconv.FormatFloat(float64(temp)/1000, 'f', 2, 64), "ºC")
+		println("Temperature:", strconv.FormatFloat(float64(temp)/1000, 'f', 2, 64), "°C")
 		press, _ := sensor.ReadPressure()
 		println("Pressure:", strconv.FormatFloat(float64(press)/100000, 'f', 2, 64), "hPa")
 		hum, _ := sensor.ReadHumidity()

examples/bmi160/main.go

@@ -0,0 +1,46 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+	"tinygo.org/x/drivers/bmi160"
+)
+
+func main() {
+	time.Sleep(5 * time.Second)
+
+	machine.SPI0.Configure(machine.SPIConfig{})
+	sensor := bmi160.NewSPI(machine.A5, machine.SPI0)
+	sensor.Configure()
+
+	if !sensor.Connected() {
+		println("BMI160 not connected")
+		return
+	}
+
+	for {
+		time.Sleep(time.Second)
+
+		t, err := sensor.ReadTemperature()
+		if err != nil {
+			println("Error reading temperature", err)
+			continue
+		}
+		fmt.Printf("Temperature: %.2f °C\n", float32(t)/1000)
+
+		accelX, accelY, accelZ, err := sensor.ReadAcceleration()
+		if err != nil {
+			println("Error reading acceleration", err)
+			continue
+		}
+		fmt.Printf("Acceleration: %.2fg %.2fg %.2fg\n", float32(accelX)/1e6, float32(accelY)/1e6, float32(accelZ)/1e6)
+
+		gyroX, gyroY, gyroZ, err := sensor.ReadRotation()
+		if err != nil {
+			println("Error reading rotation", err)
+			continue
+		}
+		fmt.Printf("Rotation: %.2f°/s %.2f°/s %.2f°/s\n", float32(gyroX)/1e6, float32(gyroY)/1e6, float32(gyroZ)/1e6)
+	}
+}

examples/bmp180/main.go

@@ -22,7 +22,7 @@ func main() {
 
 	for {
 		temp, _ := sensor.ReadTemperature()
-		println("Temperature:", float32(temp)/1000, "ºC")
+		println("Temperature:", float32(temp)/1000, "°C")
 
 		pressure, _ := sensor.ReadPressure()
 		println("Pressure", float32(pressure)/100000, "hPa")

examples/bmp280/main.go

@@ -0,0 +1,44 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+	"tinygo.org/x/drivers/bmp280"
+)
+
+func main() {
+	time.Sleep(5 * time.Second)
+
+	machine.I2C0.Configure(machine.I2CConfig{})
+	sensor := bmp280.New(machine.I2C0)
+	sensor.Configure(bmp280.STANDBY_125MS, bmp280.FILTER_4X, bmp280.SAMPLING_16X, bmp280.SAMPLING_16X, bmp280.MODE_FORCED)
+
+	connected := sensor.Connected()
+	if !connected {
+		println("\nBMP280 Sensor not detected\n")
+		return
+	}
+	println("\nBMP280 Sensor detected\n")
+
+	println("Calibration:")
+	sensor.PrintCali()
+
+	for {
+		t, err := sensor.ReadTemperature()
+		if err != nil {
+			println("Error reading temperature")
+		}
+		// Temperature in degrees Celsius
+		fmt.Printf("Temperature: %.2f °C\n", float32(t)/1000)
+
+		p, err := sensor.ReadPressure()
+		if err != nil {
+			println("Error reading pressure")
+		}
+		// Pressure in hectoPascal
+		fmt.Printf("Pressure: %.2f hPa\n", float32(p)/100000)
+
+		time.Sleep(5 * time.Second)
+	}
+}

examples/ds3231/main.go

@@ -38,7 +38,7 @@ func main() {
 			fmt.Printf("Date: %d/%s/%02d %02d:%02d:%02d \r\n", dt.Year(), dt.Month(), dt.Day(), dt.Hour(), dt.Minute(), dt.Second())
 		}
 		temp, _ := rtc.ReadTemperature()
-		fmt.Printf("Temperature: %.2f ºC \r\n", float32(temp)/1000)
+		fmt.Printf("Temperature: %.2f °C \r\n", float32(temp)/1000)
 
 		time.Sleep(time.Second * 1)
 	}

examples/easystepper/main.go

@@ -9,6 +9,7 @@ import (
 
 func main() {
 	motor := easystepper.New(machine.P13, machine.P15, machine.P14, machine.P16, 200, 75)
+	motor.Configure()
 
 	for {
 		println("CLOCKWISE")

examples/espat/espconsole/main.go

@@ -23,11 +23,12 @@ const actAsAP = false
 const ssid = "YOURSSID"
 const pass = "YOURPASS"
 
+// these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
 var (
 	uart = machine.UART1
-	tx   = machine.D10
-	rx   = machine.D11
+	tx   = machine.PA22
+	rx   = machine.PA23
 
 	console = machine.UART0
 
@@ -42,28 +43,20 @@ func main() {
 	adaptor.Configure()
 
 	// first check if connected
-	if adaptor.Connected() {
+	if connectToESP() {
+		println("Connected to wifi adaptor.")
 		adaptor.Echo(false)
-		console.Write([]byte("\r\n"))
-		console.Write([]byte("ESP-AT console enabled.\r\n"))
-		console.Write([]byte("Firmware version:\r\n"))
-		console.Write(adaptor.Version())
-		console.Write([]byte("\r\n"))
 
-		if actAsAP {
-			provideAP()
-		} else {
-			connectToAP()
-		}
-
-		console.Write([]byte("Type an AT command then press enter:\r\n"))
-		prompt()
+		connectToAP()
 	} else {
-		console.Write([]byte("\r\n"))
-		console.Write([]byte("Unable to connect to wifi adaptor.\r\n"))
+		println("")
+		failMessage("Unable to connect to wifi adaptor.")
 		return
 	}
 
+	println("Type an AT command then press enter:")
+	prompt()
+
 	input := make([]byte, 64)
 	i := 0
 	for {
@@ -81,7 +74,8 @@ func main() {
 				adaptor.Write(input[:i+2])
 
 				// display response
-				console.Write(adaptor.Response(100))
+				r, _ := adaptor.Response(500)
+				console.Write(r)
 
 				// prompt
 				prompt()
@@ -100,28 +94,50 @@ func main() {
 }
 
 func prompt() {
-	console.Write([]byte("ESPAT>"))
+	print("ESPAT>")
+}
+
+// connect to ESP8266/ESP32
+func connectToESP() bool {
+	for i := 0; i < 5; i++ {
+		println("Connecting to wifi adaptor...")
+		if adaptor.Connected() {
+			return true
+		}
+		time.Sleep(1 * time.Second)
+	}
+	return false
 }
 
 // connect to access point
 func connectToAP() {
-	console.Write([]byte("Connecting to wifi network...\r\n"))
+	println("Connecting to wifi network '" + ssid + "'")
+
 	adaptor.SetWifiMode(espat.WifiModeClient)
 	adaptor.ConnectToAP(ssid, pass, 10)
-	console.Write([]byte("Connected.\r\n"))
-	console.Write([]byte(adaptor.GetClientIP()))
-	console.Write([]byte("\r\n"))
+
+	println("Connected.")
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
 }
 
 // provide access point
 func provideAP() {
-	time.Sleep(500 * time.Millisecond)
-	console.Write([]byte("Starting wifi network as access point '"))
-	console.Write([]byte(ssid))
-	console.Write([]byte("'...\r\n"))
+	println("Starting wifi network as access point '" + ssid + "'...")
 	adaptor.SetWifiMode(espat.WifiModeAP)
 	adaptor.SetAPConfig(ssid, pass, 7, espat.WifiAPSecurityWPA2_PSK)
-	console.Write([]byte("Ready.\r\n"))
-	console.Write([]byte(adaptor.GetAPIP()))
-	console.Write([]byte("\r\n"))
+	println("Ready.")
+	ip, _ := adaptor.GetAPIP()
+	println(ip)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
 }

examples/espat/esphub/main.go

@@ -11,7 +11,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/espat/net"
+	"tinygo.org/x/drivers/net"
 )
 
 // change actAsAP to true to act as an access point instead of connecting to one.
@@ -21,11 +21,12 @@ const actAsAP = false
 const ssid = "YOURSSID"
 const pass = "YOURPASS"
 
+// these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
 var (
 	uart = machine.UART1
-	tx   = machine.D10
-	rx   = machine.D11
+	tx   = machine.PA22
+	rx   = machine.PA23
 
 	adaptor *espat.Device
 )
@@ -42,17 +43,14 @@ func main() {
 	readyled.High()
 
 	// first check if connected
-	if adaptor.Connected() {
+	if connectToESP() {
 		println("Connected to wifi adaptor.")
 		adaptor.Echo(false)
 
-		if actAsAP {
-			provideAP()
-		} else {
-			connectToAP()
-		}
+		connectToAP()
 	} else {
-		println("Unable to connect to wifi adaptor.")
+		println("")
+		failMessage("Unable to connect to wifi adaptor.")
 		return
 	}
 
@@ -85,21 +83,47 @@ func main() {
 	println("Done.")
 }
 
+// connect to ESP8266/ESP32
+func connectToESP() bool {
+	for i := 0; i < 5; i++ {
+		println("Connecting to wifi adaptor...")
+		if adaptor.Connected() {
+			return true
+		}
+		time.Sleep(1 * time.Second)
+	}
+	return false
+}
+
 // connect to access point
 func connectToAP() {
-	println("Connecting to wifi network...")
+	println("Connecting to wifi network '" + ssid + "'")
+
 	adaptor.SetWifiMode(espat.WifiModeClient)
 	adaptor.ConnectToAP(ssid, pass, 10)
+
 	println("Connected.")
-	println(adaptor.GetClientIP())
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
 }
 
 // provide access point
 func provideAP() {
-	println("Starting wifi network as access point:")
-	println(ssid)
+	println("Starting wifi network as access point '" + ssid + "'...")
 	adaptor.SetWifiMode(espat.WifiModeAP)
 	adaptor.SetAPConfig(ssid, pass, 7, espat.WifiAPSecurityWPA2_PSK)
 	println("Ready.")
-	println(adaptor.GetAPIP())
+	ip, _ := adaptor.GetAPIP()
+	println(ip)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
 }

examples/espat/espstation/main.go

@@ -11,7 +11,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/espat/net"
+	"tinygo.org/x/drivers/net"
 )
 
 // access point info
@@ -21,11 +21,12 @@ const pass = "YOURPASS"
 // IP address of the listener aka "hub". Replace with your own info.
 const hubIP = "0.0.0.0"
 
+// these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
 var (
 	uart = machine.UART1
-	tx   = machine.D10
-	rx   = machine.D11
+	tx   = machine.PA22
+	rx   = machine.PA23
 
 	adaptor *espat.Device
 )
@@ -38,13 +39,14 @@ func main() {
 	adaptor.Configure()
 
 	// first check if connected
-	if adaptor.Connected() {
+	if connectToESP() {
 		println("Connected to wifi adaptor.")
 		adaptor.Echo(false)
 
 		connectToAP()
 	} else {
-		println("Unable to connect to wifi adaptor.")
+		println("")
+		failMessage("Unable to connect to wifi adaptor.")
 		return
 	}
 
@@ -70,11 +72,37 @@ func main() {
 	println("Done.")
 }
 
+// connect to ESP8266/ESP32
+func connectToESP() bool {
+	for i := 0; i < 5; i++ {
+		println("Connecting to wifi adaptor...")
+		if adaptor.Connected() {
+			return true
+		}
+		time.Sleep(1 * time.Second)
+	}
+	return false
+}
+
 // connect to access point
 func connectToAP() {
-	println("Connecting to wifi network...")
+	println("Connecting to wifi network '" + ssid + "'")
+
 	adaptor.SetWifiMode(espat.WifiModeClient)
 	adaptor.ConnectToAP(ssid, pass, 10)
+
 	println("Connected.")
-	println(adaptor.GetClientIP())
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
 }

examples/espat/mqttclient/main.go

@@ -17,7 +17,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/espat/mqtt"
+	"tinygo.org/x/drivers/net/mqtt"
 )
 
 // access point info
@@ -25,14 +25,16 @@ const ssid = "YOURSSID"
 const pass = "YOURPASS"
 
 // IP address of the MQTT broker to use. Replace with your own info.
-//const server = "tcp://test.mosquitto.org:1883"
-const server = "ssl://test.mosquitto.org:8883"
+const server = "tcp://test.mosquitto.org:1883"
 
+//const server = "ssl://test.mosquitto.org:8883"
+
+// these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
 var (
-	uart = machine.UART1
-	tx   = machine.D10
-	rx   = machine.D11
+	uart = machine.UART2
+	tx   = machine.PA22
+	rx   = machine.PA23
 
 	console = machine.UART0
 
@@ -62,10 +64,10 @@ func main() {
 		return
 	}
 
-	opts := mqtt.NewClientOptions(adaptor)
+	opts := mqtt.NewClientOptions()
 	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
 
-	println("Connectng to MQTT...")
+	println("Connecting to MQTT broker at", server)
 	cl := mqtt.NewClient(opts)
 	if token := cl.Connect(); token.Wait() && token.Error() != nil {
 		failMessage(token.Error().Error())
@@ -104,13 +106,18 @@ func connectToESP() bool {
 
 // connect to access point
 func connectToAP() {
-	println("Connecting to wifi network...")
+	println("Connecting to wifi network '" + ssid + "'")
 
 	adaptor.SetWifiMode(espat.WifiModeClient)
 	adaptor.ConnectToAP(ssid, pass, 10)
 
 	println("Connected.")
-	println(adaptor.GetClientIP())
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
 }
 
 // Returns an int >= min, < max

examples/espat/mqttsub/main.go

@@ -0,0 +1,163 @@
+// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
+// It creates an MQTT connection that publishes a message every second
+// to an MQTT broker.
+//
+// In other words:
+// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> Internet <--> MQTT broker.
+//
+// You must also install the Paho MQTT package to build this program:
+//
+// 		go get -u github.com/eclipse/paho.mqtt.golang
+//
+package main
+
+import (
+	"fmt"
+	"machine"
+	"math/rand"
+	"time"
+
+	"tinygo.org/x/drivers/espat"
+	"tinygo.org/x/drivers/net/mqtt"
+)
+
+// access point info
+const ssid = "YOURSSID"
+const pass = "YOURPASS"
+
+// IP address of the MQTT broker to use. Replace with your own info.
+//const server = "tcp://test.mosquitto.org:1883"
+
+const server = "ssl://test.mosquitto.org:8883"
+
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+	// these are defaults for the Arduino Nano33 IoT.
+	uart = machine.UART1
+	tx   = machine.PA22
+	rx   = machine.PA23
+
+	console = machine.UART0
+
+	adaptor *espat.Device
+	cl      mqtt.Client
+	topicTx = "tinygo/tx"
+	topicRx = "tinygo/rx"
+)
+
+func subHandler(client mqtt.Client, msg mqtt.Message) {
+	fmt.Printf("[%s]  ", msg.Topic())
+	fmt.Printf("%s\r\n", msg.Payload())
+}
+
+func main() {
+	time.Sleep(3000 * time.Millisecond)
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+	rand.Seed(time.Now().UnixNano())
+
+	// Init esp8266/esp32
+	adaptor = espat.New(uart)
+	adaptor.Configure()
+
+	// first check if connected
+	if connectToESP() {
+		println("Connected to wifi adaptor.")
+		adaptor.Echo(false)
+
+		connectToAP()
+	} else {
+		println("")
+		failMessage("Unable to connect to wifi adaptor.")
+		return
+	}
+
+	opts := mqtt.NewClientOptions()
+	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
+
+	println("Connecting to MQTT broker at", server)
+	cl = mqtt.NewClient(opts)
+	if token := cl.Connect(); token.Wait() && token.Error() != nil {
+		failMessage(token.Error().Error())
+	}
+
+	// subscribe
+	token := cl.Subscribe(topicRx, 0, subHandler)
+	token.Wait()
+	if token.Error() != nil {
+		failMessage(token.Error().Error())
+	}
+
+	go publishing()
+
+	select {}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting MQTT...")
+	cl.Disconnect(100)
+
+	println("Done.")
+}
+
+func publishing() {
+	for {
+		println("Publishing MQTT message...")
+		data := []byte("{\"e\":[{ \"n\":\"hello\", \"v\":101 }]}")
+		token := cl.Publish(topicTx, 0, false, data)
+		token.Wait()
+		if token.Error() != nil {
+			println(token.Error().Error())
+		}
+
+		time.Sleep(1000 * time.Millisecond)
+	}
+}
+
+// connect to ESP8266/ESP32
+func connectToESP() bool {
+	for i := 0; i < 5; i++ {
+		println("Connecting to wifi adaptor...")
+		if adaptor.Connected() {
+			return true
+		}
+		time.Sleep(1 * time.Second)
+	}
+	return false
+}
+
+// connect to access point
+func connectToAP() {
+	println("Connecting to wifi network '" + ssid + "'")
+
+	adaptor.SetWifiMode(espat.WifiModeClient)
+	adaptor.ConnectToAP(ssid, pass, 10)
+
+	println("Connected.")
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
+}
+
+// Returns an int >= min, < max
+func randomInt(min, max int) int {
+	return min + rand.Intn(max-min)
+}
+
+// Generate a random string of A-Z chars with len = l
+func randomString(len int) string {
+	bytes := make([]byte, len)
+	for i := 0; i < len; i++ {
+		bytes[i] = byte(randomInt(65, 90))
+	}
+	return string(bytes)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
+}

examples/espat/tcpclient/main.go

@@ -11,7 +11,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers/espat"
-	"tinygo.org/x/drivers/espat/net"
+	"tinygo.org/x/drivers/net"
 )
 
 // access point info
@@ -21,6 +21,7 @@ const pass = "YOURPASS"
 // IP address of the server aka "hub". Replace with your own info.
 const serverIP = "0.0.0.0"
 
+// these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
 var (
 	uart = machine.UART1
@@ -38,13 +39,14 @@ func main() {
 	adaptor.Configure()
 
 	// first check if connected
-	if adaptor.Connected() {
+	if connectToESP() {
 		println("Connected to wifi adaptor.")
 		adaptor.Echo(false)
 
 		connectToAP()
 	} else {
-		println("Unable to connect to wifi adaptor.")
+		println("")
+		failMessage("Unable to connect to wifi adaptor.")
 		return
 	}
 
@@ -54,7 +56,10 @@ func main() {
 	laddr := &net.TCPAddr{Port: 8080}
 
 	println("Dialing TCP connection...")
-	conn, _ := net.DialTCP("tcp", laddr, raddr)
+	conn, err := net.DialTCP("tcp", laddr, raddr)
+	if err != nil {
+		failMessage(err.Error())
+	}
 
 	for {
 		// send data
@@ -70,11 +75,37 @@ func main() {
 	println("Done.")
 }
 
+// connect to ESP8266/ESP32
+func connectToESP() bool {
+	for i := 0; i < 5; i++ {
+		println("Connecting to wifi adaptor...")
+		if adaptor.Connected() {
+			return true
+		}
+		time.Sleep(1 * time.Second)
+	}
+	return false
+}
+
 // connect to access point
 func connectToAP() {
-	println("Connecting to wifi network...")
+	println("Connecting to wifi network '" + ssid + "'")
+
 	adaptor.SetWifiMode(espat.WifiModeClient)
 	adaptor.ConnectToAP(ssid, pass, 10)
+
 	println("Connected.")
-	println(adaptor.GetClientIP())
+	ip, err := adaptor.GetClientIP()
+	if err != nil {
+		failMessage(err.Error())
+	}
+
+	println(ip)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
 }

examples/flash/console/console_example.go

@@ -0,0 +1,259 @@
+package console_example
+
+import (
+	"fmt"
+	"io"
+	"machine"
+	"os"
+	"strconv"
+	"strings"
+
+	"tinygo.org/x/drivers/flash"
+)
+
+const consoleBufLen = 64
+const storageBufLen = 512
+
+var (
+	debug = false
+
+	input [consoleBufLen]byte
+	store [storageBufLen]byte
+
+	console = machine.UART0
+
+	dev *flash.Device
+
+	commands map[string]cmdfunc = map[string]cmdfunc{
+		"":      cmdfunc(noop),
+		"erase": cmdfunc(erase),
+		"lsblk": cmdfunc(lsblk),
+		"write": cmdfunc(write),
+		"xxd":   cmdfunc(xxd),
+	}
+)
+
+type cmdfunc func(argv []string)
+
+const (
+	StateInput = iota
+	StateEscape
+	StateEscBrc
+	StateCSI
+)
+
+func RunFor(device *flash.Device) {
+
+	dev = device
+	dev.Configure(&flash.DeviceConfig{
+		Identifier: flash.DefaultDeviceIdentifier,
+	})
+
+	prompt()
+
+	var state = StateInput
+
+	for i := 0; ; {
+		if console.Buffered() > 0 {
+			data, _ := console.ReadByte()
+			if debug {
+				fmt.Printf("\rdata: %x\r\n\r", data)
+				prompt()
+				console.Write(input[:i])
+			}
+			switch state {
+			case StateInput:
+				switch data {
+				case 0x8:
+					fallthrough
+				case 0x7f: // this is probably wrong... works on my machine tho :)
+					// backspace
+					if i > 0 {
+						i -= 1
+						console.Write([]byte{0x8, 0x20, 0x8})
+					}
+				case 13:
+					// return key
+					console.Write([]byte("\r\n"))
+					runCommand(string(input[:i]))
+					prompt()
+
+					i = 0
+					continue
+				case 27:
+					// escape
+					state = StateEscape
+				default:
+					// anything else, just echo the character if it is printable
+					if strconv.IsPrint(rune(data)) {
+						if i < (consoleBufLen - 1) {
+							console.WriteByte(data)
+							input[i] = data
+							i++
+						}
+					}
+				}
+			case StateEscape:
+				switch data {
+				case 0x5b:
+					state = StateEscBrc
+				default:
+					state = StateInput
+				}
+			default:
+				// TODO: handle escape sequences
+				state = StateInput
+			}
+		}
+	}
+}
+
+func runCommand(line string) {
+	argv := strings.SplitN(strings.TrimSpace(line), " ", -1)
+	cmd := argv[0]
+	cmdfn, ok := commands[cmd]
+	if !ok {
+		println("unknown command: " + line)
+		return
+	}
+	cmdfn(argv)
+}
+
+func noop(argv []string) {}
+
+func lsblk(argv []string) {
+	attrs := dev.Attrs()
+	status1, _ := dev.ReadStatus()
+	status2, _ := dev.ReadStatus2()
+	serialNumber1, _ := dev.ReadSerialNumber()
+	fmt.Printf(
+		"\n-------------------------------------\r\n"+
+			" Device Information:  \r\n"+
+			"-------------------------------------\r\n"+
+			" JEDEC ID: %v\r\n"+
+			" Serial:   %v\r\n"+
+			" Status 1: %02x\r\n"+
+			" Status 2: %02x\r\n"+
+			" \r\n"+
+			" Max clock speed (MHz): %d\r\n"+
+			" Has Sector Protection: %t\r\n"+
+			" Supports Fast Reads:   %t\r\n"+
+			" Supports QSPI Reads:   %t\r\n"+
+			" Supports QSPI Write:   %t\r\n"+
+			" Write Status Split:    %t\r\n"+
+			" Single Status Byte:    %t\r\n"+
+			"-------------------------------------\r\n\r\n",
+		attrs.JedecID,
+		serialNumber1,
+		status1,
+		status2,
+		attrs.MaxClockSpeedMHz,
+		attrs.HasSectorProtection,
+		attrs.SupportsFastRead,
+		attrs.SupportsQSPI,
+		attrs.SupportsQSPIWrites,
+		attrs.WriteStatusSplit,
+		attrs.SingleStatusByte,
+	)
+}
+
+func erase(argv []string) {
+	if len(argv) < 3 {
+		println("usage: erase <chip|block|sector> <bytes>")
+		return
+	}
+	var err error
+	var addr uint64 = 0x0
+	if addr, err = strconv.ParseUint(argv[2], 16, 32); err != nil {
+		println("Invalid address: " + err.Error() + "\r\n")
+		return
+	}
+	if argv[1] == "block" {
+		if err = dev.EraseBlock(uint32(addr)); err != nil {
+			println("Block erase error: " + err.Error() + "\r\n")
+		}
+	} else if argv[1] == "sector" {
+		if err = dev.EraseSector(uint32(addr)); err != nil {
+			println("Sector erase error: " + err.Error() + "\r\n")
+		}
+	} else if argv[1] == "chip" {
+		if err = dev.EraseAll(); err != nil {
+			println("Chip erase error: " + err.Error() + "\r\n")
+		}
+	} else {
+		println("usage: erase <chip|block|sector> <bytes>")
+	}
+}
+
+func write(argv []string) {
+	if len(argv) < 3 {
+		println("usage: write <hex offset> <bytes>")
+	}
+	var err error
+	var addr uint64 = 0x0
+	if addr, err = strconv.ParseUint(argv[1], 16, 32); err != nil {
+		println("Invalid address: " + err.Error() + "\r\n")
+		return
+	}
+	buf := []byte(argv[2])
+	if _, err = dev.WriteAt(buf, int64(addr)); err != nil {
+		println("Write error: " + err.Error() + "\r\n")
+	}
+}
+
+func xxd(argv []string) {
+	var err error
+	var addr uint64 = 0x0
+	var size int = 64
+	switch len(argv) {
+	case 3:
+		if size, err = strconv.Atoi(argv[2]); err != nil {
+			println("Invalid size argument: " + err.Error() + "\r\n")
+			return
+		}
+		if size > storageBufLen || size < 1 {
+			fmt.Printf("Size of hexdump must be greater than 0 and less than %d\r\n", storageBufLen)
+			return
+		}
+		fallthrough
+	case 2:
+		if addr, err = strconv.ParseUint(argv[1], 16, 32); err != nil {
+			println("Invalid address: " + err.Error() + "\r\n")
+			return
+		}
+		fallthrough
+	case 1:
+		// no args supplied, so nothing to do here, just use the defaults
+	default:
+		println("usage: xxd <hex address, ex: 0xA0> <size of hexdump in bytes>\r\n")
+		return
+	}
+	buf := store[0:size]
+	dev.ReadAt(buf, int64(addr))
+	xxdfprint(os.Stdout, uint32(addr), buf)
+}
+
+func xxdfprint(w io.Writer, offset uint32, b []byte) {
+	var l int
+	var buf16 = make([]byte, 16)
+	for i, c := 0, len(b); i < c; i += 16 {
+		l = i + 16
+		if l >= c {
+			l = c
+		}
+		fmt.Fprintf(w, "%08x: % x    ", offset+uint32(i), b[i:l])
+		for j, n := 0, l-i; j < 16; j++ {
+			if j >= n || !strconv.IsPrint(rune(b[i+j])) {
+				buf16[j] = '.'
+			} else {
+				buf16[j] = b[i+j]
+			}
+		}
+		console.Write(buf16)
+		println()
+	}
+}
+
+func prompt() {
+	print("==> ")
+}

examples/flash/console/qspi/main.go

@@ -0,0 +1,21 @@
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/examples/flash/console"
+	"tinygo.org/x/drivers/flash"
+)
+
+func main() {
+	console_example.RunFor(
+		flash.NewQSPI(
+			machine.QSPI_CS,
+			machine.QSPI_SCK,
+			machine.QSPI_DATA0,
+			machine.QSPI_DATA1,
+			machine.QSPI_DATA2,
+			machine.QSPI_DATA3,
+		),
+	)
+}

examples/flash/console/spi/main.go

@@ -0,0 +1,20 @@
+package main
+
+import (
+	"machine"
+
+	console_example "tinygo.org/x/drivers/examples/flash/console"
+	"tinygo.org/x/drivers/flash"
+)
+
+func main() {
+	console_example.RunFor(
+		flash.NewSPI(
+			&machine.SPI1,
+			machine.SPI1_SDO_PIN,
+			machine.SPI1_SDI_PIN,
+			machine.SPI1_SCK_PIN,
+			machine.SPI1_CS_PIN,
+		),
+	)
+}

examples/gps/i2c/main.go

@@ -1,8 +1,8 @@
 package main
 
 import (
-	"fmt"
 	"machine"
+	"time"
 
 	"tinygo.org/x/drivers/gps"
 )
@@ -11,19 +11,40 @@ func main() {
 	println("GPS I2C Example")
 	machine.I2C0.Configure(machine.I2CConfig{})
 	ublox := gps.NewI2C(&machine.I2C0)
-	parser := gps.Parser(ublox)
+	parser := gps.NewParser()
 	var fix gps.Fix
 	for {
-		fix = parser.NextFix()
+		s, err := ublox.NextSentence()
+		if err != nil {
+			println(err)
+			continue
+		}
+
+		fix, err = parser.Parse(s)
+		if err != nil {
+			println(err)
+			continue
+		}
 		if fix.Valid {
 			print(fix.Time.Format("15:04:05"))
-			print(", lat=", fmt.Sprintf("%f", fix.Latitude))
-			print(", long=", fmt.Sprintf("%f", fix.Longitude))
-			print(", altitude:=", fix.Altitude)
+			print(", lat=")
+			print(fix.Latitude)
+			print(", long=")
+			print(fix.Longitude)
+			print(", altitude=", fix.Altitude)
 			print(", satellites=", fix.Satellites)
+			if fix.Speed != 0 {
+				print(", speed=")
+				print(fix.Speed)
+			}
+			if fix.Heading != 0 {
+				print(", heading=")
+				print(fix.Heading)
+			}
 			println()
 		} else {
 			println("No fix")
 		}
+		time.Sleep(200 * time.Millisecond)
 	}
 }

examples/gps/uart/main.go

@@ -1,8 +1,8 @@
 package main
 
 import (
-	"fmt"
 	"machine"
+	"time"
 
 	"tinygo.org/x/drivers/gps"
 )
@@ -11,19 +11,40 @@ func main() {
 	println("GPS UART Example")
 	machine.UART1.Configure(machine.UARTConfig{BaudRate: 9600})
 	ublox := gps.NewUART(&machine.UART1)
-	parser := gps.Parser(ublox)
+	parser := gps.NewParser()
 	var fix gps.Fix
 	for {
-		fix = parser.NextFix()
+		s, err := ublox.NextSentence()
+		if err != nil {
+			println(err)
+			continue
+		}
+
+		fix, err = parser.Parse(s)
+		if err != nil {
+			println(err)
+			continue
+		}
 		if fix.Valid {
 			print(fix.Time.Format("15:04:05"))
-			print(", lat=", fmt.Sprintf("%f", fix.Latitude))
-			print(", long=", fmt.Sprintf("%f", fix.Longitude))
-			print(", altitude:=", fix.Altitude)
+			print(", lat=")
+			print(fix.Latitude)
+			print(", long=")
+			print(fix.Longitude)
+			print(", altitude=", fix.Altitude)
 			print(", satellites=", fix.Satellites)
+			if fix.Speed != 0 {
+				print(", speed=")
+				print(fix.Speed)
+			}
+			if fix.Heading != 0 {
+				print(", heading=")
+				print(fix.Heading)
+			}
 			println()
 		} else {
 			println("No fix")
 		}
+		time.Sleep(200 * time.Millisecond)
 	}
 }

examples/hcsr04/main.go

@@ -0,0 +1,20 @@
+package hcsr04
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/hcsr04"
+)
+
+func main() {
+	sensor := hcsr04.New(machine.D10, machine.D9)
+	sensor.Configure()
+
+	println("Ultrasonic starts")
+	for {
+		println("Distance:", sensor.ReadDistance(), "mm")
+
+		time.Sleep(100 * time.Millisecond)
+	}
+}

examples/hd44780i2c/main.go

@@ -0,0 +1,60 @@
+package main
+
+import (
+	"machine"
+	"strconv"
+	"time"
+
+	"tinygo.org/x/drivers/hd44780i2c"
+)
+
+func main() {
+
+	// Note: most HD44780 LCD modules requires 5V power, however some variations
+	// use 3.3V (and may be damaged by 5V).
+
+	machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	lcd := hd44780i2c.New(machine.I2C0, 0x27) // some modules have address 0x3F
+
+	lcd.Configure(hd44780i2c.Config{
+		Width:       16, // required
+		Height:      2,  // required
+		CursorOn:    true,
+		CursorBlink: true,
+	})
+
+	lcd.Print([]byte(" TinyGo\n  LCD Test "))
+
+	// CGRAM address 0x0-0x7 can be used to store 8 custom characters
+	lcd.CreateCharacter(0x0, []byte{0x00, 0x11, 0x0E, 0x1F, 0x15, 0x1F, 0x1F, 0x1F})
+	lcd.Print([]byte{0x0})
+
+	// You can use https://maxpromer.github.io/LCD-Character-Creator/
+	// to crete your own characters.
+
+	time.Sleep(time.Millisecond * 7000)
+
+	for i := 0; i < 5; i++ {
+		lcd.BacklightOn(false)
+		time.Sleep(time.Millisecond * 250)
+		lcd.BacklightOn(true)
+		time.Sleep(time.Millisecond * 250)
+	}
+
+	lcd.CursorOn(false)
+	lcd.CursorBlink(false)
+
+	i := 0
+	for {
+
+		lcd.ClearDisplay()
+		lcd.SetCursor(2, 1)
+		lcd.Print([]byte(strconv.FormatInt(int64(i), 10)))
+		i++
+		time.Sleep(time.Millisecond * 100)
+
+	}
+}

examples/ili9341/basic/atsamd21.go

@@ -0,0 +1,29 @@
+// +build atsamd21
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewSPI(
+		machine.SPI0,
+		machine.D0,
+		machine.D1,
+		machine.D2,
+	)
+
+	backlight = machine.D3
+)
+
+func init() {
+	machine.SPI0.Configure(machine.SPIConfig{
+		SCK:       machine.SPI0_SCK_PIN,
+		SDO:       machine.SPI0_SDO_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+		Frequency: 24000000,
+	})
+}

examples/ili9341/basic/main.go

@@ -0,0 +1,38 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	black = color.RGBA{0, 0, 0, 255}
+	white = color.RGBA{255, 255, 255, 255}
+	red   = color.RGBA{255, 0, 0, 255}
+	blue  = color.RGBA{0, 0, 255, 255}
+	green = color.RGBA{0, 255, 0, 255}
+)
+
+func main() {
+
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display.Configure(ili9341.Config{})
+	width, height := display.Size()
+
+	display.FillScreen(black)
+	backlight.High()
+
+	display.FillRectangle(0, 0, width/2, height/2, white)
+	display.FillRectangle(width/2, 0, width/2, height/2, red)
+	display.FillRectangle(0, height/2, width/2, height/2, green)
+	display.FillRectangle(width/2, height/2, width/2, height/2, blue)
+	display.FillRectangle(width/4, height/4, width/2, height/2, black)
+	for {
+		time.Sleep(time.Hour)
+	}
+
+}

examples/ili9341/basic/pyportal.go

@@ -0,0 +1,22 @@
+// +build pyportal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewParallel(
+		machine.LCD_DATA0,
+		machine.TFT_WR,
+		machine.TFT_DC,
+		machine.TFT_CS,
+		machine.TFT_RESET,
+		machine.TFT_RD,
+	)
+
+	backlight = machine.TFT_BACKLIGHT
+)

examples/ili9341/basic/wioterminal.go

@@ -0,0 +1,29 @@
+// +build wioterminal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewSPI(
+		machine.SPI3,
+		machine.LCD_DC,
+		machine.LCD_SS_PIN,
+		machine.LCD_RESET,
+	)
+
+	backlight = machine.LCD_BACKLIGHT
+)
+
+func init() {
+	machine.SPI3.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40000000,
+	})
+}

examples/ili9341/pyportal_boing/main.go

@@ -0,0 +1,225 @@
+// Port of Adafruit's "pyportal_boing" demo found here:
+// https://github.com/adafruit/Adafruit_ILI9341/blob/master/examples/pyportal_boing
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/examples/ili9341/pyportal_boing/graphics"
+	"tinygo.org/x/drivers/ili9341"
+)
+
+const (
+	BGCOLOR    = 0xAD75
+	GRIDCOLOR  = 0xA815
+	BGSHADOW   = 0x5285
+	GRIDSHADOW = 0x600C
+	RED        = 0xF800
+	WHITE      = 0xFFFF
+
+	YBOTTOM = 123  // Ball Y coord at bottom
+	YBOUNCE = -3.5 // Upward velocity on ball bounce
+
+	_debug = false
+)
+
+var (
+	frameBuffer = [(graphics.BALLHEIGHT + 8) * (graphics.BALLWIDTH + 8)]uint16{}
+
+	startTime int64
+	frame     int64
+
+	// Ball coordinates are stored floating-point because screen refresh
+	// is so quick, whole-pixel movements are just too fast!
+	ballx     float32
+	bally     float32
+	ballvx    float32
+	ballvy    float32
+	ballframe float32
+	balloldx  float32
+	balloldy  float32
+
+	// Color table for ball rotation effect
+	palette [16]uint16
+)
+
+func main() {
+
+	// configure backlight
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	// configure display
+	display.Configure(ili9341.Config{})
+	print("width, height == ")
+	width, height := display.Size()
+	println(width, height)
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation270)
+	DrawBackground()
+
+	startTime = time.Now().UnixNano()
+	frame = 0
+
+	ballx = 20.0
+	bally = YBOTTOM // Current ball position
+	ballvx = 0.8
+	ballvy = YBOUNCE // Ball velocity
+	ballframe = 3    // Ball animation frame #
+	balloldx = ballx
+	balloldy = bally // Prior ball position
+
+	for {
+
+		balloldx = ballx // Save prior position
+		balloldy = bally
+		ballx += ballvx // Update position
+		bally += ballvy
+		ballvy += 0.06 // Update Y velocity
+		if (ballx <= 15) || (ballx >= graphics.SCREENWIDTH-graphics.BALLWIDTH) {
+			ballvx *= -1 // Left/right bounce
+		}
+		if bally >= YBOTTOM { // Hit ground?
+			bally = YBOTTOM  // Clip and
+			ballvy = YBOUNCE // bounce up
+		}
+
+		// Determine screen area to update.  This is the bounds of the ball's
+		// prior and current positions, so the old ball is fully erased and new
+		// ball is fully drawn.
+		var minx, miny, maxx, maxy, width, height int16
+
+		// Determine bounds of prior and new positions
+		minx = int16(ballx)
+		if int16(balloldx) < minx {
+			minx = int16(balloldx)
+		}
+		miny = int16(bally)
+		if int16(balloldy) < miny {
+			miny = int16(balloldy)
+		}
+		maxx = int16(ballx + graphics.BALLWIDTH - 1)
+		if int16(balloldx+graphics.BALLWIDTH-1) > maxx {
+			maxx = int16(balloldx + graphics.BALLWIDTH - 1)
+		}
+		maxy = int16(bally + graphics.BALLHEIGHT - 1)
+		if int16(balloldy+graphics.BALLHEIGHT-1) > maxy {
+			maxy = int16(balloldy + graphics.BALLHEIGHT - 1)
+		}
+
+		width = maxx - minx + 1
+		height = maxy - miny + 1
+
+		// Ball animation frame # is incremented opposite the ball's X velocity
+		ballframe -= ballvx * 0.5
+		if ballframe < 0 {
+			ballframe += 14 // Constrain from 0 to 13
+		} else if ballframe >= 14 {
+			ballframe -= 14
+		}
+
+		// Set 7 palette entries to white, 7 to red, based on frame number.
+		// This makes the ball spin
+		for i := 0; i < 14; i++ {
+			if (int(ballframe)+i)%14 < 7 {
+				palette[i+2] = WHITE
+			} else {
+				palette[i+2] = RED
+			} // Palette entries 0 and 1 aren't used (clear and shadow, respectively)
+		}
+
+		// Only the changed rectangle is drawn into the 'renderbuf' array...
+		var c uint16              //, *destPtr;
+		bx := minx - int16(ballx) // X relative to ball bitmap (can be negative)
+		by := miny - int16(bally) // Y relative to ball bitmap (can be negative)
+		bgx := minx               // X relative to background bitmap (>= 0)
+		bgy := miny               // Y relative to background bitmap (>= 0)
+		var bx1, bgx1 int16       // Loop counters and working vars
+		var p uint8               // 'packed' value of 2 ball pixels
+		var bufIdx int8 = 0
+
+		//tft.setAddrWindow(minx, miny, width, height)
+
+		for y := 0; y < int(height); y++ { // For each row...
+			//destPtr = &renderbuf[bufIdx][0];
+			bx1 = bx   // Need to keep the original bx and bgx values,
+			bgx1 = bgx // so copies of them are made here (and changed in loop below)
+			for x := 0; x < int(width); x++ {
+				var bgidx = int(bgy)*(graphics.SCREENWIDTH/8) + int(bgx1/8)
+				if (bx1 >= 0) && (bx1 < graphics.BALLWIDTH) && // Is current pixel row/column
+					(by >= 0) && (by < graphics.BALLHEIGHT) { // inside the ball bitmap area?
+					// Yes, do ball compositing math...
+					p = graphics.Ball[int(by*(graphics.BALLWIDTH/2))+int(bx1/2)] // Get packed value (2 pixels)
+					if (bx1 & 1) != 0 {
+						c = uint16(p & 0xF)
+					} else {
+						c = uint16(p >> 4)
+					} // Unpack high or low nybble
+					if c == 0 { // Outside ball - just draw grid
+						if graphics.Background[bgidx]&(0x80>>(bgx1&7)) != 0 {
+							c = GRIDCOLOR
+						} else {
+							c = BGCOLOR
+						}
+					} else if c > 1 { // In ball area...
+						c = palette[c]
+					} else { // In shadow area...
+						if graphics.Background[bgidx]&(0x80>>(bgx1&7)) != 0 {
+							c = GRIDSHADOW
+						} else {
+							c = BGSHADOW
+						}
+					}
+				} else { // Outside ball bitmap, just draw background bitmap...
+					if graphics.Background[bgidx]&(0x80>>(bgx1&7)) != 0 {
+						c = GRIDCOLOR
+					} else {
+						c = BGCOLOR
+					}
+				}
+				frameBuffer[y*int(width)+x] = c
+				bx1++ // Increment bitmap position counters (X axis)
+				bgx1++
+			}
+			//tft.dmaWait(); // Wait for prior line to complete
+			//tft.writePixels(&renderbuf[bufIdx][0], width, false); // Non-blocking write
+			bufIdx = 1 - bufIdx
+			by++ // Increment bitmap position counters (Y axis)
+			bgy++
+		}
+
+		display.DrawRGBBitmap(minx, miny, frameBuffer[:width*height], width, height)
+
+		// Show approximate frame rate
+		frame++
+		if frame&255 == 0 { // Every 256 frames...
+			elapsed := (time.Now().UnixNano() - startTime) / int64(time.Second)
+			if elapsed > 0 {
+				println(frame/elapsed, " fps")
+			}
+		}
+	}
+}
+
+func DrawBackground() {
+	w, h := display.Size()
+	byteWidth := (w + 7) / 8 // Bitmap scanline pad = whole byte
+	var b uint8
+	for j := int16(0); j < h; j++ {
+		for k := int16(0); k < w; k++ {
+			if k&7 > 0 {
+				b <<= 1
+			} else {
+				b = graphics.Background[j*byteWidth+k/8]
+			}
+			if b&0x80 == 0 {
+				frameBuffer[k] = BGCOLOR
+			} else {
+				frameBuffer[k] = GRIDCOLOR
+			}
+		}
+		display.DrawRGBBitmap(0, j, frameBuffer[0:w], w, 1)
+	}
+}

examples/ili9341/pyportal_boing/pyportal.go

@@ -0,0 +1,22 @@
+// +build pyportal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewParallel(
+		machine.LCD_DATA0,
+		machine.TFT_WR,
+		machine.TFT_DC,
+		machine.TFT_CS,
+		machine.TFT_RESET,
+		machine.TFT_RD,
+	)
+
+	backlight = machine.TFT_BACKLIGHT
+)

examples/ili9341/pyportal_boing/wioterminal.go

@@ -0,0 +1,29 @@
+// +build wioterminal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewSPI(
+		machine.SPI3,
+		machine.LCD_DC,
+		machine.LCD_SS_PIN,
+		machine.LCD_RESET,
+	)
+
+	backlight = machine.LCD_BACKLIGHT
+)
+
+func init() {
+	machine.SPI3.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40000000,
+	})
+}

examples/ili9341/scroll/atsamd21.go

@@ -0,0 +1,29 @@
+// +build atsamd21
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewSPI(
+		machine.SPI0,
+		machine.D0,
+		machine.D1,
+		machine.D2,
+	)
+
+	backlight = machine.D3
+)
+
+func init() {
+	machine.SPI0.Configure(machine.SPIConfig{
+		SCK:       machine.SPI0_SCK_PIN,
+		SDO:       machine.SPI0_SDO_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+		Frequency: 24000000,
+	})
+}

examples/ili9341/scroll/main.go

@@ -0,0 +1,40 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	red   = color.RGBA{255, 0, 0, 255}
+	blue  = color.RGBA{0, 0, 255, 255}
+	green = color.RGBA{0, 255, 0, 255}
+	black = color.RGBA{0, 0, 0, 255}
+	white = color.RGBA{255, 255, 255, 255}
+)
+
+func main() {
+
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display.Configure(ili9341.Config{})
+	width, height := display.Size()
+
+	display.FillScreen(black)
+	backlight.High()
+
+	display.FillRectangle(0, 0, width/2, height/2, white)
+	display.FillRectangle(width/2, 0, width/2, height/2, red)
+	display.FillRectangle(0, height/2, width/2, height/2, green)
+	display.FillRectangle(width/2, height/2, width/2, height/2, blue)
+	display.FillRectangle(width/4, height/4, width/2, height/2, black)
+
+	for scroll := int16(0); ; scroll = (scroll + 1) % 320 {
+		time.Sleep(7500 * time.Microsecond)
+		display.SetScroll(scroll)
+	}
+
+}

examples/ili9341/scroll/pyportal.go

@@ -0,0 +1,22 @@
+// +build pyportal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewParallel(
+		machine.LCD_DATA0,
+		machine.TFT_WR,
+		machine.TFT_DC,
+		machine.TFT_CS,
+		machine.TFT_RESET,
+		machine.TFT_RD,
+	)
+
+	backlight = machine.TFT_BACKLIGHT
+)

examples/ili9341/scroll/wioterminal.go

@@ -0,0 +1,29 @@
+// +build wioterminal
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+var (
+	display = ili9341.NewSPI(
+		machine.SPI3,
+		machine.LCD_DC,
+		machine.LCD_SS_PIN,
+		machine.LCD_RESET,
+	)
+
+	backlight = machine.LCD_BACKLIGHT
+)
+
+func init() {
+	machine.SPI3.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40000000,
+	})
+}

examples/l293x/simple/main.go

@@ -0,0 +1,34 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/l293x"
+)
+
+func main() {
+	wheel := l293x.New(machine.D10, machine.D11, machine.D12)
+	wheel.Configure()
+
+	for i := 0; i <= 10; i++ {
+		println("Forward")
+		wheel.Forward()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Backward")
+		wheel.Backward()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+	}
+
+	println("Stop")
+	wheel.Stop()
+}

examples/l293x/speed/main.go

@@ -0,0 +1,45 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/l293x"
+)
+
+const (
+	maxSpeed = 30000
+)
+
+func main() {
+	machine.InitPWM()
+
+	wheel := l293x.NewWithSpeed(machine.D10, machine.D11, machine.PWM{machine.D12})
+	wheel.Configure()
+
+	for i := 0; i <= 10; i++ {
+		println("Forward")
+		var i uint16
+		for i = 0; i < maxSpeed; i += 1000 {
+			wheel.Forward(i)
+			time.Sleep(time.Millisecond * 100)
+		}
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Backward")
+		for i = 0; i < maxSpeed; i += 1000 {
+			wheel.Backward(i)
+			time.Sleep(time.Millisecond * 100)
+		}
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+	}
+
+	println("Stop")
+	wheel.Stop()
+}

examples/l9110x/simple/main.go

@@ -0,0 +1,34 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/l9110x"
+)
+
+func main() {
+	wheel := l9110x.New(machine.D10, machine.D11)
+	wheel.Configure()
+
+	for i := 0; i <= 10; i++ {
+		println("Forward")
+		wheel.Forward()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Backward")
+		wheel.Backward()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+	}
+
+	println("Stop")
+	wheel.Stop()
+}

examples/l9110x/speed/main.go

@@ -0,0 +1,45 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/l9110x"
+)
+
+const (
+	maxSpeed = 30000
+)
+
+func main() {
+	machine.InitPWM()
+
+	wheel := l9110x.NewWithSpeed(machine.PWM{machine.D11}, machine.PWM{machine.D12})
+	wheel.Configure()
+
+	for i := 0; i <= 10; i++ {
+		println("Forward")
+		var i uint16
+		for i = 0; i < maxSpeed; i += 1000 {
+			wheel.Forward(i)
+			time.Sleep(time.Millisecond * 100)
+		}
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+
+		println("Backward")
+		for i = 0; i < maxSpeed; i += 1000 {
+			wheel.Backward(i)
+			time.Sleep(time.Millisecond * 100)
+		}
+
+		println("Stop")
+		wheel.Stop()
+		time.Sleep(time.Millisecond * 1000)
+	}
+
+	println("Stop")
+	wheel.Stop()
+}

examples/lis2mdl/main.go

@@ -0,0 +1,29 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/lis2mdl"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+	compass := lis2mdl.New(machine.I2C0)
+
+	if !compass.Connected() {
+		for {
+			println("LIS2MDL not connected!")
+			time.Sleep(1 * time.Second)
+		}
+	}
+
+	compass.Configure(lis2mdl.Configuration{}) //default settings
+
+	for {
+		heading := compass.ReadCompass()
+		println("Heading:", heading)
+
+		time.Sleep(time.Millisecond * 100)
+	}
+}

examples/lis3dh/main.go

@@ -11,7 +11,7 @@ import (
 var i2c = machine.I2C1
 
 func main() {
-	i2c.Configure(machine.I2CConfig{})
+	i2c.Configure(machine.I2CConfig{SCL: machine.SCL1_PIN, SDA: machine.SDA1_PIN})
 
 	accel := lis3dh.New(i2c)
 	accel.Address = lis3dh.Address1 // address on the Circuit Playground Express

examples/lsm303agr/main.go

@@ -0,0 +1,39 @@
+package main
+
+import (
+	"machine"
+	"time"
+	"tinygo.org/x/drivers/lsm303agr"
+)
+
+func main() {
+
+	machine.I2C0.Configure(machine.I2CConfig{})
+	accel_mag := lsm303agr.New(machine.I2C0)
+
+	if !accel_mag.Connected() {
+		println("LSM303AGR/MAG not connected!")
+		return
+	}
+
+	accel_mag.Configure(lsm303agr.Configuration{}) //default settings
+
+	for {
+
+		accel_x, accel_y, accel_z := accel_mag.ReadAcceleration()
+		pitch, roll := accel_mag.ReadPitchRoll()
+		mag_x, mag_y, mag_z := accel_mag.ReadMagneticField()
+		heading := accel_mag.ReadCompass()
+		temp, _ := accel_mag.ReadTemperature()
+
+		println("ACCEL_X:", accel_x, " ACCEL_Y:", accel_y, " ACCEL_Z:", accel_z)
+		println("MAG_X:", mag_x, " MAG_Y:", mag_y, " MAG_Z:", mag_z)
+		println("Pitch:", pitch, " Roll:", roll)
+		println("Heading:", heading)
+		println("Temperature:", temp/1000)
+		println("\n")
+
+		time.Sleep(time.Millisecond * 100)
+	}
+
+}

examples/mag3110/main.go

@@ -19,7 +19,7 @@ func main() {
 		println("Magnetic readings:", x, y, z)
 
 		c, _ := mag.ReadTemperature()
-		println("Temperature:", float32(c)/1000, "ºC")
+		println("Temperature:", float32(c)/1000, "°C")
 
 		time.Sleep(time.Millisecond * 100)
 	}

examples/mcp3008/main.go

@@ -0,0 +1,32 @@
+// Connects to a MCP3008 ADC via SPI.
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/mcp3008"
+)
+
+var (
+	spi   = machine.SPI0
+	csPin = machine.D12
+)
+
+func main() {
+	spi.Configure(machine.SPIConfig{
+		Frequency: 4000000,
+		Mode:      3})
+
+	adc := mcp3008.New(spi, csPin)
+	adc.Configure()
+
+	// get "CH0" aka "machine.ADC" interface to channel 0 from ADC.
+	p := adc.CH0
+
+	for {
+		val := p.Get()
+		println(val)
+		time.Sleep(50 * time.Millisecond)
+	}
+}

examples/semihosting/semihosting.go

@@ -0,0 +1,23 @@
+package main
+
+// A small example that demonstrates how SemiHosting can be used.
+// You could use it with a board that supports GDB, such as the BBC micro:bit:
+// 1. Compile and debug it:
+//      tinygo gdb -target=microbit -ocd-output tinygo.org/x/drivers/examples/semihosting
+// 2. Enable semihosting in the GDB shell:
+//      monitor arm semihosting enable
+// 3. Start the program:
+//      continue
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers/semihosting"
+)
+
+func main() {
+	for {
+		semihosting.Stdout.Write([]byte("hello world!\n"))
+		time.Sleep(time.Second)
+	}
+}

examples/shifter/main.go

@@ -0,0 +1,44 @@
+// This example is designed to implement the button shifter for a PyBadge.
+package main
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers/shifter"
+)
+
+func main() {
+	buttons := shifter.NewButtons()
+	buttons.Configure()
+
+	for {
+		// Update the pins state, to later be returned by .Get()
+		buttons.ReadInput()
+
+		if buttons.Pins[shifter.BUTTON_LEFT].Get() {
+			println("Button LEFT pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_UP].Get() {
+			println("Button UP pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_DOWN].Get() {
+			println("Button DOWN pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_RIGHT].Get() {
+			println("Button RIGHT pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_SELECT].Get() {
+			println("Button SELECT pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_START].Get() {
+			println("Button START pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_A].Get() {
+			println("Button A pressed")
+		}
+		if buttons.Pins[shifter.BUTTON_B].Get() {
+			println("Button B pressed")
+		}
+		time.Sleep(100 * time.Millisecond)
+	}
+}

examples/shiftregister/main.go

@@ -0,0 +1,124 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/shiftregister"
+)
+
+func main() {
+	d := shiftregister.New(
+		shiftregister.EIGHT_BITS,
+		machine.PA6, // D12 Pin latch connected to ST_CP of 74HC595 (12)
+		machine.PA7, // D11 Pin clock connected to SH_CP of 74HC595 (11)
+		machine.PB6, // D10 Pin data connected to DS of 74HC595 (14)
+	)
+	d.Configure()
+
+	for {
+
+		// Examples using masks. This method writes all pins state at once.
+
+		// All pins High
+		d.WriteMask(0xFF)
+		delay()
+
+		// All pins Low
+		d.WriteMask(0x00)
+		delay()
+
+		// Some fun with masks
+		for _, pattern := range patterns {
+			d.WriteMask(pattern)
+			shortDelay()
+		}
+		delay()
+		d.WriteMask(0x00)
+
+		// Examples using individually addressable pin API. This method is slower than using mask
+		// because all register's pins state are send for is p.Set() call.
+
+		// Set register's pin #4
+		d.GetShiftPin(4).High()
+		delay()
+		d.GetShiftPin(4).Low()
+		delay()
+
+		// Get an individual pin and use it
+		pin := d.GetShiftPin(7)
+		pin.High()
+		delay()
+		pin.Low()
+		delay()
+
+		// Prepare an array of pin attached to the register
+		pins := [8]*shiftregister.ShiftPin{}
+		for p := 0; p < 8; p++ {
+			pins[p] = d.GetShiftPin(p)
+		}
+
+		for p := 7; p >= 0; p-- {
+			pins[p].Low()
+			shortDelay()
+			pins[p].High()
+		}
+
+		for p := 7; p >= 0; p-- {
+			pins[p].High()
+			time.Sleep(100 * time.Millisecond)
+			pins[p].Low()
+		}
+		delay()
+	}
+}
+
+func delay() {
+	time.Sleep(500 * time.Millisecond)
+}
+func shortDelay() {
+	time.Sleep(100 * time.Millisecond)
+}
+
+var patterns = []uint32{
+	0b00000001,
+	0b00000010,
+	0b00000100,
+	0b00001000,
+	0b00010000,
+	0b00100000,
+	0b01000000,
+	0b10000000,
+	0b10000001,
+	0b10000010,
+	0b10000100,
+	0b10001000,
+	0b10010000,
+	0b10100000,
+	0b11000000,
+	0b11000001,
+	0b11000010,
+	0b11000100,
+	0b11001000,
+	0b11010000,
+	0b11100000,
+	0b11100001,
+	0b11100010,
+	0b11100100,
+	0b11101000,
+	0b11110000,
+	0b11110001,
+	0b11110010,
+	0b11110100,
+	0b11111000,
+	0b11111001,
+	0b11111010,
+	0b11111100,
+	0b11111101,
+	0b11111110,
+	0b11111111,
+	0b00000000,
+	0b11111111,
+	0b00000000,
+	0b11111111,
+}

examples/sht3x/main.go

@@ -16,7 +16,7 @@ func main() {
 		temp, humidity, _ := sensor.ReadTemperatureHumidity()
 		t := fmt.Sprintf("%.2f", float32(temp)/1000)
 		h := fmt.Sprintf("%.2f", float32(humidity)/100)
-		println("Temperature:", t, "ºC")
+		println("Temperature:", t, "°C")
 		println("Humidity", h, "%")
 		time.Sleep(2 * time.Second)
 	}

examples/ssd1351/main.go

@@ -0,0 +1,36 @@
+package ssd1351
+
+import (
+	"machine"
+
+	"image/color"
+
+	"tinygo.org/x/drivers/ssd1351"
+)
+
+func main() {
+	machine.SPI1.Configure(machine.SPIConfig{
+		Frequency: 2000000,
+	})
+	display := ssd1351.New(machine.SPI1, machine.D18, machine.D17, machine.D16, machine.D4, machine.D19)
+
+	display.Configure(ssd1351.Config{
+		Width:        96,
+		Height:       96,
+		ColumnOffset: 16,
+	})
+
+	width, height := display.Size()
+
+	white := color.RGBA{255, 255, 255, 255}
+	red := color.RGBA{255, 0, 0, 255}
+	blue := color.RGBA{0, 0, 255, 255}
+	green := color.RGBA{0, 255, 0, 255}
+
+	display.FillRectangle(0, 0, width, height/4, white)
+	display.FillRectangle(0, height/4, width, height/4, red)
+	display.FillRectangle(0, height/2, width, height/4, green)
+	display.FillRectangle(0, 3*height/4, width, height/4, blue)
+
+	display.Display()
+}

examples/st7789/main.go

@@ -9,12 +9,37 @@ import (
 )
 
 func main() {
+
+	// Example configuration for Adafruit Clue
+	// machine.SPI1.Configure(machine.SPIConfig{
+	//	Frequency: 8000000,
+	//	SCK:       machine.TFT_SCK,
+	//	SDO:       machine.TFT_SDO,
+	//	SDI:       machine.TFT_SDO,
+	//	Mode:      0,
+	// })
+	// display := st7789.New(machine.SPI1,
+	//	machine.TFT_RESET,
+	//	machine.TFT_DC,
+	//	machine.TFT_CS,
+	//	machine.TFT_LITE)
+
 	machine.SPI0.Configure(machine.SPIConfig{
 		Frequency: 8000000,
-		Mode:      3,
+		Mode:      0,
+	})
+	display := st7789.New(machine.SPI0,
+		machine.P6, // TFT_RESET
+		machine.P7, // TFT_DC
+		machine.P8, // TFT_CS
+		machine.P9) // TFT_LITE
+
+	display.Configure(st7789.Config{
+		Rotation:   st7789.NO_ROTATION,
+		RowOffset:  80,
+		FrameRate:  st7789.FRAMERATE_111,
+		VSyncLines: st7789.MAX_VSYNC_SCANLINES,
 	})
-	display := st7789.New(machine.SPI0, machine.P6, machine.P7, machine.P8)
-	display.Configure(st7789.Config{Rotation: st7789.NO_ROTATION})
 
 	width, height := display.Size()
 

examples/thermistor/main.go

@@ -19,7 +19,7 @@ func main() {
 
 	for {
 		temp, _ := sensor.ReadTemperature()
-		println("Temperature:", temp/1000, "ºC")
+		println("Temperature:", temp/1000, "°C")
 
 		time.Sleep(2 * time.Second)
 	}

examples/tmp102/main.go

@@ -0,0 +1,28 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/tmp102"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	thermo := tmp102.New(machine.I2C0)
+	thermo.Configure(tmp102.Config{})
+
+	for {
+
+		temp, _ := thermo.ReadTemperature()
+
+		print(fmt.Sprintf("%.2f°C\r\n", float32(temp)/1000.0))
+
+		time.Sleep(time.Millisecond * 1000)
+	}
+
+}

examples/touch/resistive/fourwire/main.go

@@ -0,0 +1,80 @@
+// demo of 4-wire touchscreen as described in app note:
+// http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf
+package main
+
+import (
+	"machine"
+	"math"
+
+	"tinygo.org/x/drivers/touch"
+	"tinygo.org/x/drivers/touch/resistive"
+)
+
+var (
+	resistiveTouch = new(resistive.FourWire)
+)
+
+const (
+	Xmin = 750
+	Xmax = 325
+	Ymin = 840
+	Ymax = 240
+)
+
+func main() {
+
+	// configure touchscreen
+	machine.InitADC()
+	resistiveTouch.Configure(&resistive.FourWireConfig{
+		YP: machine.TOUCH_YD, // y+
+		YM: machine.TOUCH_YU, // y-
+		XP: machine.TOUCH_XR, // x+
+		XM: machine.TOUCH_XL, // x-
+	})
+
+	last := touch.Point{}
+
+	// loop and poll for touches, including performing debouncing
+	debounce := 0
+	for {
+
+		point := resistiveTouch.ReadTouchPoint()
+		touch := touch.Point{}
+		if point.Z>>6 > 100 {
+			touch.X = mapval(point.X>>6, Xmin, Xmax, 0, 240)
+			touch.Y = mapval(point.Y>>6, Ymin, Ymax, 0, 320)
+			touch.Z = point.Z >> 6 / 100
+		} else {
+			touch.X = 0
+			touch.Y = 0
+			touch.Z = 0
+		}
+
+		if last.Z != touch.Z {
+			debounce = 0
+			last = touch
+		} else if math.Abs(float64(touch.X-last.X)) > 4 ||
+			math.Abs(float64(touch.Y-last.Y)) > 4 {
+			debounce = 0
+			last = touch
+		} else if debounce > 1 {
+			debounce = 0
+			HandleTouch(last)
+		} else if touch.Z > 0 {
+			debounce++
+		} else {
+			last = touch
+			debounce = 0
+		}
+
+	}
+}
+
+// based on Arduino's "map" function
+func mapval(x int, inMin int, inMax int, outMin int, outMax int) int {
+	return (x-inMin)*(outMax-outMin)/(inMax-inMin) + outMin
+}
+
+func HandleTouch(touch touch.Point) {
+	println("touch point:", touch.X, touch.Y, touch.Z)
+}

examples/touch/resistive/pyportal_touchpaint/main.go

@@ -0,0 +1,185 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"math"
+
+	"tinygo.org/x/drivers/ili9341"
+	"tinygo.org/x/drivers/touch"
+	"tinygo.org/x/drivers/touch/resistive"
+)
+
+var (
+	resistiveTouch = &resistive.FourWire{}
+
+	display = ili9341.NewParallel(
+		machine.LCD_DATA0,
+		machine.TFT_WR,
+		machine.TFT_DC,
+		machine.TFT_CS,
+		machine.TFT_RESET,
+		machine.TFT_RD,
+	)
+
+	white   = color.RGBA{255, 255, 255, 255}
+	black   = color.RGBA{0, 0, 0, 255}
+	red     = color.RGBA{255, 0, 0, 255}
+	green   = color.RGBA{0, 255, 0, 255}
+	blue    = color.RGBA{0, 0, 255, 255}
+	magenta = color.RGBA{255, 0, 255, 255}
+	yellow  = color.RGBA{255, 255, 0, 255}
+	cyan    = color.RGBA{0, 255, 255, 255}
+
+	oldColor     color.RGBA
+	currentColor color.RGBA
+)
+
+const (
+	penRadius = 3
+	boxSize   = 30
+
+	Xmin = 750
+	Xmax = 325
+	Ymin = 840
+	Ymax = 240
+)
+
+func main() {
+
+	// configure backlight
+	machine.TFT_BACKLIGHT.Configure(machine.PinConfig{machine.PinOutput})
+
+	// configure touchscreen
+	machine.InitADC()
+	resistiveTouch.Configure(&resistive.FourWireConfig{
+		YP: machine.TOUCH_YD,
+		YM: machine.TOUCH_YU,
+		XP: machine.TOUCH_XR,
+		XM: machine.TOUCH_XL,
+	})
+
+	// configure display
+	display.Configure(ili9341.Config{})
+
+	// fill the background and activate the backlight
+	width, height := display.Size()
+	display.FillRectangle(0, 0, width, height, black)
+	machine.TFT_BACKLIGHT.High()
+
+	// make color selection boxes
+	display.FillRectangle(0, 0, boxSize, boxSize, red)
+	display.FillRectangle(boxSize, 0, boxSize, boxSize, yellow)
+	display.FillRectangle(boxSize*2, 0, boxSize, boxSize, green)
+	display.FillRectangle(boxSize*3, 0, boxSize, boxSize, cyan)
+	display.FillRectangle(boxSize*4, 0, boxSize, boxSize, blue)
+	display.FillRectangle(boxSize*5, 0, boxSize, boxSize, magenta)
+	display.FillRectangle(boxSize*6, 0, boxSize, boxSize, black)
+	display.FillRectangle(boxSize*7, 0, boxSize, boxSize, white)
+
+	// set the initial color to red and draw a box to highlight it
+	oldColor = red
+	currentColor = red
+	display.DrawRectangle(0, 0, boxSize, boxSize, white)
+
+	last := touch.Point{}
+
+	// loop and poll for touches, including performing debouncing
+	debounce := 0
+	for {
+
+		point := resistiveTouch.ReadTouchPoint()
+		touch := touch.Point{}
+		if point.Z>>6 > 100 {
+			rawX := mapval(point.X>>6, Xmin, Xmax, 0, 240)
+			rawY := mapval(point.Y>>6, Ymin, Ymax, 0, 320)
+			touch.X = rawX
+			touch.Y = rawY
+			touch.Z = 1
+		} else {
+			touch.X = 0
+			touch.Y = 0
+			touch.Z = 0
+		}
+
+		if last.Z != touch.Z {
+			debounce = 0
+			last = touch
+		} else if math.Abs(float64(touch.X-last.X)) > 4 ||
+			math.Abs(float64(touch.Y-last.Y)) > 4 {
+			debounce = 0
+			last = touch
+		} else if debounce > 1 {
+			debounce = 0
+			HandleTouch(last)
+		} else if touch.Z > 0 {
+			debounce++
+		} else {
+			last = touch
+			debounce = 0
+		}
+
+	}
+}
+
+// based on Arduino's "map" function
+func mapval(x int, inMin int, inMax int, outMin int, outMax int) int {
+	return (x-inMin)*(outMax-outMin)/(inMax-inMin) + outMin
+}
+
+func HandleTouch(touch touch.Point) {
+
+	if int16(touch.Y) < boxSize {
+		oldColor = currentColor
+		x := int16(touch.X)
+		switch {
+		case x < boxSize:
+			currentColor = red
+		case x < boxSize*2:
+			currentColor = yellow
+		case x < boxSize*3:
+			currentColor = green
+		case x < boxSize*4:
+			currentColor = cyan
+		case x < boxSize*5:
+			currentColor = blue
+		case x < boxSize*6:
+			currentColor = magenta
+		case x < boxSize*7:
+			currentColor = black
+		case x < boxSize*8:
+			currentColor = white
+		}
+
+		if oldColor == currentColor {
+			return
+		}
+
+		display.DrawRectangle((x/boxSize)*boxSize, 0, boxSize, boxSize, white)
+		switch oldColor {
+		case red:
+			x = 0
+		case yellow:
+			x = boxSize
+		case green:
+			x = boxSize * 2
+		case cyan:
+			x = boxSize * 3
+		case blue:
+			x = boxSize * 4
+		case magenta:
+			x = boxSize * 5
+		case black:
+			x = boxSize * 6
+		case white:
+			x = boxSize * 7
+		}
+		display.FillRectangle(int16(x), 0, boxSize, boxSize, oldColor)
+
+	}
+
+	if (int16(touch.Y) - penRadius) > boxSize {
+		display.FillRectangle(
+			int16(touch.X), int16(touch.Y), penRadius*2, penRadius*2, currentColor)
+	}
+}

examples/veml6070/main.go

@@ -0,0 +1,41 @@
+package main
+
+import (
+	"time"
+
+	"machine"
+
+	"tinygo.org/x/drivers/veml6070"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+	sensor := veml6070.New(machine.I2C0)
+
+	if !sensor.Configure() {
+		println("VEML6070 could not be configured")
+		return
+	}
+
+	println("VEML6070 configured")
+
+	for {
+		intensity, _ := sensor.ReadUVALightIntensity()
+		println("UVA light intensity:", float32(intensity)/1000.0, "W/(m*m)")
+
+		switch sensor.GetEstimatedRiskLevel(intensity) {
+		case veml6070.UVI_RISK_LOW:
+			println("UV risk level: low")
+		case veml6070.UVI_RISK_MODERATE:
+			println("UV risk level: moderate")
+		case veml6070.UVI_RISK_HIGH:
+			println("UV risk level: high")
+		case veml6070.UVI_RISK_VERY_HIGH:
+			println("UV risk level: very high")
+		case veml6070.UVI_RISK_EXTREME:
+			println("UV risk level: extreme")
+		}
+
+		time.Sleep(2 * time.Second)
+	}
+}

examples/waveshare-epd/epd4in2/main.go

@@ -0,0 +1,56 @@
+package main
+
+import (
+	"machine"
+
+	"image/color"
+
+	"time"
+
+	"tinygo.org/x/drivers/waveshare-epd/epd4in2"
+)
+
+var display epd4in2.Device
+
+func main() {
+	machine.SPI0.Configure(machine.SPIConfig{
+		Frequency: 8000000,
+		Mode:      0,
+	})
+
+	display = epd4in2.New(machine.SPI0, machine.P6, machine.P7, machine.P8, machine.P9)
+	display.Configure(epd4in2.Config{})
+
+	black := color.RGBA{1, 1, 1, 255}
+
+	display.ClearBuffer()
+	println("Clear the display")
+	display.ClearDisplay()
+	display.WaitUntilIdle()
+	println("Waiting for 2 seconds")
+	time.Sleep(2 * time.Second)
+
+	// Show a checkered board
+	for i := int16(0); i < 16; i++ {
+		for j := int16(0); j < 25; j++ {
+			if (i+j)%2 == 0 {
+				showRect(i*8, j*10, 8, 10, black)
+			}
+		}
+	}
+	println("Show checkered board")
+	display.Display()
+	display.WaitUntilIdle()
+	println("Waiting for 2 seconds")
+	time.Sleep(2 * time.Second)
+
+	println("You could remove power now")
+}
+
+func showRect(x int16, y int16, w int16, h int16, c color.RGBA) {
+	for i := x; i < x+w; i++ {
+		for j := y; j < y+h; j++ {
+			display.SetPixel(i, j, c)
+		}
+	}
+}

examples/wifinina/mqttclient/main.go

@@ -0,0 +1,149 @@
+// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
+// It creates an MQTT connection that publishes a message every second
+// to an MQTT broker.
+//
+// In other words:
+// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> Internet <--> MQTT broker.
+//
+// You must install the Paho MQTT package to build this program:
+//
+// 		go get -u github.com/eclipse/paho.mqtt.golang
+//
+package main
+
+import (
+	"fmt"
+	"machine"
+	"math/rand"
+	"time"
+
+	"tinygo.org/x/drivers/net/mqtt"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the MQTT broker to use. Replace with your own info.
+const server = "tcp://test.mosquitto.org:1883"
+
+//const server = "ssl://test.mosquitto.org:8883"
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor = &wifinina.Device{
+		SPI:   spi,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	console = machine.UART0
+	topic   = "tinygo"
+)
+
+func main() {
+	time.Sleep(3000 * time.Millisecond)
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+	rand.Seed(time.Now().UnixNano())
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	// Init esp8266/esp32
+	adaptor.Configure()
+
+	connectToAP()
+
+	opts := mqtt.NewClientOptions()
+	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
+
+	println("Connectng to MQTT...")
+	cl := mqtt.NewClient(opts)
+	if token := cl.Connect(); token.Wait() && token.Error() != nil {
+		failMessage(token.Error().Error())
+	}
+
+	for i := 0; ; i++ {
+		println("Publishing MQTT message...")
+		data := []byte(fmt.Sprintf(`{"e":[{"n":"hello %d","v":101}]}`, i))
+		token := cl.Publish(topic, 0, false, data)
+		token.Wait()
+		if err := token.Error(); err != nil {
+			switch t := err.(type) {
+			case wifinina.Error:
+				println(t.Error(), "attempting to reconnect")
+				if token := cl.Connect(); token.Wait() && token.Error() != nil {
+					failMessage(token.Error().Error())
+				}
+			default:
+				println(err.Error())
+			}
+		}
+		time.Sleep(1 * time.Millisecond)
+	}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting MQTT...")
+	cl.Disconnect(100)
+
+	println("Done.")
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	println("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		println("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	println("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		println(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	println(ip.String())
+}
+
+// Returns an int >= min, < max
+func randomInt(min, max int) int {
+	return min + rand.Intn(max-min)
+}
+
+// Generate a random string of A-Z chars with len = l
+func randomString(len int) string {
+	bytes := make([]byte, len)
+	for i := 0; i < len; i++ {
+		bytes[i] = byte(randomInt(65, 90))
+	}
+	return string(bytes)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
+}

examples/wifinina/mqttsub/main.go

@@ -0,0 +1,162 @@
+// This is a sensor station that uses a ESP8266 or ESP32 running on the device UART1.
+// It creates an MQTT connection that publishes a message every second
+// to an MQTT broker.
+//
+// In other words:
+// Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> Internet <--> MQTT broker.
+//
+// You must also install the Paho MQTT package to build this program:
+//
+// 		go get -u github.com/eclipse/paho.mqtt.golang
+//
+package main
+
+import (
+	"fmt"
+	"machine"
+	"math/rand"
+	"time"
+
+	"tinygo.org/x/drivers/net/mqtt"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the MQTT broker to use. Replace with your own info.
+const server = "tcp://test.mosquitto.org:1883"
+
+//const server = "ssl://test.mosquitto.org:8883"
+
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor = &wifinina.Device{
+		SPI:   spi,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	console = machine.UART0
+
+	cl      mqtt.Client
+	topicTx = "tinygo/tx"
+	topicRx = "tinygo/rx"
+)
+
+func subHandler(client mqtt.Client, msg mqtt.Message) {
+	fmt.Printf("[%s]  ", msg.Topic())
+	fmt.Printf("%s\r\n", msg.Payload())
+}
+
+func main() {
+	time.Sleep(3000 * time.Millisecond)
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+	rand.Seed(time.Now().UnixNano())
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	// Init esp8266/esp32
+	adaptor.Configure()
+
+	connectToAP()
+
+	opts := mqtt.NewClientOptions()
+	opts.AddBroker(server).SetClientID("tinygo-client-" + randomString(10))
+
+	println("Connecting to MQTT broker at", server)
+	cl = mqtt.NewClient(opts)
+	if token := cl.Connect(); token.Wait() && token.Error() != nil {
+		failMessage(token.Error().Error())
+	}
+
+	// subscribe
+	token := cl.Subscribe(topicRx, 0, subHandler)
+	token.Wait()
+	if token.Error() != nil {
+		failMessage(token.Error().Error())
+	}
+
+	go publishing()
+
+	select {}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting MQTT...")
+	cl.Disconnect(100)
+
+	println("Done.")
+}
+
+func publishing() {
+	for i := 0; ; i++ {
+		println("Publishing MQTT message...")
+		data := []byte(fmt.Sprintf(`{"e":[{"n":"hello %d","v":101}]}`, i))
+		token := cl.Publish(topicRx, 0, false, data)
+		token.Wait()
+		if token.Error() != nil {
+			println(token.Error().Error())
+		}
+
+		time.Sleep(100 * time.Millisecond)
+	}
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	println("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		println("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	println("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		println(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	println(ip.String())
+}
+
+// Returns an int >= min, < max
+func randomInt(min, max int) int {
+	return min + rand.Intn(max-min)
+}
+
+// Generate a random string of A-Z chars with len = l
+func randomString(len int) string {
+	bytes := make([]byte, len)
+	for i := 0; i < len; i++ {
+		bytes[i] = byte(randomInt(65, 90))
+	}
+	return string(bytes)
+}
+
+func failMessage(msg string) {
+	for {
+		println(msg)
+		time.Sleep(1 * time.Second)
+	}
+}

examples/wifinina/ntpclient/main.go

@@ -0,0 +1,166 @@
+// This is an example of using the wifinina driver to implement a NTP client.
+// It creates a UDP connection to request the current time and parse the
+// response from a NTP server.
+package main
+
+import (
+	"errors"
+	"fmt"
+	"machine"
+	"runtime"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const ntpHost = "129.6.15.29"
+
+const NTP_PACKET_SIZE = 48
+
+var (
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	// these are the default pins for the Arduino Nano33 IoT.
+	adaptor = wifinina.Device{
+		SPI:   machine.NINA_SPI,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	b = make([]byte, NTP_PACKET_SIZE)
+
+	console = machine.UART0
+)
+
+func main() {
+
+	// Init esp32
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	machine.NINA_SPI.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+	adaptor.Configure()
+
+	// connect to access point
+	connectToAP()
+
+	// now make UDP connection
+	ip := net.ParseIP(ntpHost)
+	raddr := &net.UDPAddr{IP: ip, Port: 123}
+	laddr := &net.UDPAddr{Port: 2390}
+	conn, err := net.DialUDP("udp", laddr, raddr)
+	if err != nil {
+		for {
+			time.Sleep(time.Second)
+			println(err)
+		}
+	}
+
+	for {
+		// send data
+		println("Requesting NTP time...")
+		t, err := getCurrentTime(conn)
+		if err != nil {
+			message("Error getting current time: %v", err)
+		} else {
+			message("NTP time: %v", t)
+		}
+		runtime.AdjustTimeOffset(-1 * int64(time.Since(t)))
+		for i := 0; i < 10; i++ {
+			message("Current time: %v", time.Now())
+			time.Sleep(1 * time.Second)
+		}
+	}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting UDP...")
+	conn.Close()
+	println("Done.")
+}
+
+func getCurrentTime(conn *net.UDPSerialConn) (time.Time, error) {
+	if err := sendNTPpacket(conn); err != nil {
+		return time.Time{}, err
+	}
+	clearBuffer()
+	for now := time.Now(); time.Since(now) < time.Second; {
+		time.Sleep(5 * time.Millisecond)
+		if n, err := conn.Read(b); err != nil {
+			return time.Time{}, fmt.Errorf("error reading UDP packet: %w", err)
+		} else if n == 0 {
+			continue // no packet received yet
+		} else if n != NTP_PACKET_SIZE {
+			if n != NTP_PACKET_SIZE {
+				return time.Time{}, fmt.Errorf("expected NTP packet size of %d: %d", NTP_PACKET_SIZE, n)
+			}
+		}
+		return parseNTPpacket(), nil
+	}
+	return time.Time{}, errors.New("no packet received after 1 second")
+}
+
+func sendNTPpacket(conn *net.UDPSerialConn) error {
+	clearBuffer()
+	b[0] = 0b11100011 // LI, Version, Mode
+	b[1] = 0          // Stratum, or type of clock
+	b[2] = 6          // Polling Interval
+	b[3] = 0xEC       // Peer Clock Precision
+	// 8 bytes of zero for Root Delay & Root Dispersion
+	b[12] = 49
+	b[13] = 0x4E
+	b[14] = 49
+	b[15] = 52
+	if _, err := conn.Write(b); err != nil {
+		return err
+	}
+	return nil
+}
+
+func parseNTPpacket() time.Time {
+	// the timestamp starts at byte 40 of the received packet and is four bytes,
+	// this is NTP time (seconds since Jan 1 1900):
+	t := uint32(b[40])<<24 | uint32(b[41])<<16 | uint32(b[42])<<8 | uint32(b[43])
+	const seventyYears = 2208988800
+	return time.Unix(int64(t-seventyYears), 0)
+}
+
+func clearBuffer() {
+	for i := range b {
+		b[i] = 0
+	}
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(format string, args ...interface{}) {
+	println(fmt.Sprintf(format, args...), "\r")
+}

examples/wifinina/tcpclient/main.go

@@ -0,0 +1,143 @@
+// This example opens a TCP connection using a device with WiFiNINA firmware
+// and sends some data, for the purpose of testing speed and connectivity.
+//
+// You can open a server to accept connections from this program using:
+//
+// nc -w 5 -lk 8080
+//
+package main
+
+import (
+	"bytes"
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const serverIP = ""
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor = &wifinina.Device{
+		SPI:   spi,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	console = machine.UART0
+)
+
+var buf = &bytes.Buffer{}
+
+func main() {
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	adaptor.Configure()
+
+	connectToAP()
+
+	for {
+		sendBatch()
+		time.Sleep(500 * time.Millisecond)
+	}
+	println("Done.")
+}
+
+func sendBatch() {
+
+	// make TCP connection
+	ip := net.ParseIP(serverIP)
+	raddr := &net.TCPAddr{IP: ip, Port: 8080}
+	laddr := &net.TCPAddr{Port: 8080}
+
+	message("---------------\r\nDialing TCP connection")
+	conn, err := net.DialTCP("tcp", laddr, raddr)
+	for ; err != nil; conn, err = net.DialTCP("tcp", laddr, raddr) {
+		message(err.Error())
+		time.Sleep(5 * time.Second)
+	}
+
+	n := 0
+	w := 0
+	start := time.Now()
+
+	// send data
+	message("Sending data")
+
+	for i := 0; i < 1000; i++ {
+		buf.Reset()
+		fmt.Fprint(buf,
+			"\r---------------------------- i == ", i, " ----------------------------"+
+				"\r---------------------------- i == ", i, " ----------------------------")
+		if w, err = conn.Write(buf.Bytes()); err != nil {
+			println("error:", err.Error(), "\r")
+			continue
+		}
+		n += w
+	}
+
+	buf.Reset()
+	ms := time.Now().Sub(start).Milliseconds()
+	fmt.Fprint(buf, "\nWrote ", n, " bytes in ", ms, " ms\r\n")
+	message(buf.String())
+
+	if _, err := conn.Write(buf.Bytes()); err != nil {
+		println("error:", err.Error(), "\r")
+	}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting TCP...")
+	conn.Close()
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}

examples/wifinina/udpstation/main.go

@@ -0,0 +1,100 @@
+// This is a sensor station that uses a ESP32 running nina-fw over SPI.
+// It creates a UDP connection you can use to get info to/from your computer via the microcontroller.
+//
+// In other words:
+// Your computer <--> UART0 <--> MCU <--> SPI <--> ESP32
+//
+package main
+
+import (
+	"machine"
+	"strconv"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const hubIP = ""
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	// these are the default pins for the Arduino Nano33 IoT.
+	adaptor = &wifinina.Device{
+		SPI:   machine.NINA_SPI,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+)
+
+func main() {
+
+	// Init esp8266/esp32
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	machine.NINA_SPI.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+	adaptor.Configure()
+
+	// connect to access point
+	connectToAP()
+
+	// now make UDP connection
+	ip := net.ParseIP(hubIP)
+	raddr := &net.UDPAddr{IP: ip, Port: 2222}
+	laddr := &net.UDPAddr{Port: 2222}
+
+	println("Dialing UDP connection...")
+	conn, _ := net.DialUDP("udp", laddr, raddr)
+
+	for {
+		// send data
+		println("Sending data...")
+		for i := 0; i < 25; i++ {
+			conn.Write([]byte("hello " + strconv.Itoa(i) + "\r\n"))
+		}
+		time.Sleep(1000 * time.Millisecond)
+	}
+
+	// Right now this code is never reached. Need a way to trigger it...
+	println("Disconnecting UDP...")
+	conn.Close()
+	println("Done.")
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}

examples/wifinina/webclient/main.go

@@ -0,0 +1,153 @@
+// This example opens a TCP connection using a device with WiFiNINA firmware
+// and sends a HTTP request to retrieve a webpage, based on the following
+// Arduino example:
+//
+// https://github.com/arduino-libraries/WiFiNINA/blob/master/examples/WiFiWebClientRepeating/
+//
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/net"
+	"tinygo.org/x/drivers/wifinina"
+)
+
+// access point info
+const ssid = ""
+const pass = ""
+
+// IP address of the server aka "hub". Replace with your own info.
+const server = "tinygo.org"
+
+// these are the default pins for the Arduino Nano33 IoT.
+// change these to connect to a different UART or pins for the ESP8266/ESP32
+var (
+
+	// these are the default pins for the Arduino Nano33 IoT.
+	uart = machine.UART2
+	tx   = machine.NINA_TX
+	rx   = machine.NINA_RX
+	spi  = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	adaptor = &wifinina.Device{
+		SPI:   spi,
+		CS:    machine.NINA_CS,
+		ACK:   machine.NINA_ACK,
+		GPIO0: machine.NINA_GPIO0,
+		RESET: machine.NINA_RESETN,
+	}
+
+	console = machine.UART0
+)
+
+var buf [256]byte
+
+var lastRequestTime time.Time
+var conn net.Conn
+
+func main() {
+
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	adaptor.Configure()
+
+	connectToAP()
+
+	for {
+		loop()
+	}
+	println("Done.")
+}
+
+func loop() {
+	if conn != nil {
+		for n, err := conn.Read(buf[:]); n > 0; n, err = conn.Read(buf[:]) {
+			if err != nil {
+				println("Read error: " + err.Error())
+			} else {
+				print(string(buf[0:n]))
+			}
+		}
+	}
+	if time.Now().Sub(lastRequestTime).Milliseconds() >= 10000 {
+		makeHTTPRequest()
+	}
+}
+
+func makeHTTPRequest() {
+
+	var err error
+	if conn != nil {
+		conn.Close()
+	}
+
+	// make TCP connection
+	ip := net.ParseIP(server)
+	raddr := &net.TCPAddr{IP: ip, Port: 80}
+	laddr := &net.TCPAddr{Port: 8080}
+
+	message("\r\n---------------\r\nDialing TCP connection")
+	conn, err = net.DialTCP("tcp", laddr, raddr)
+	for ; err != nil; conn, err = net.DialTCP("tcp", laddr, raddr) {
+		message("connection failed: " + err.Error())
+		time.Sleep(5 * time.Second)
+	}
+	println("Connected!\r")
+
+	print("Sending HTTP request...")
+	fmt.Fprintln(conn, "GET / HTTP/1.1")
+	fmt.Fprintln(conn, "Host:", server)
+	fmt.Fprintln(conn, "User-Agent: TinyGo/0.10.0")
+	fmt.Fprintln(conn, "Connection: close")
+	fmt.Fprintln(conn)
+	println("Sent!\r\n\r")
+
+	lastRequestTime = time.Now()
+}
+
+func readLine(conn *net.TCPSerialConn) string {
+	println("Attempting to read...\r")
+	b := buf[:]
+	for expiry := time.Now().Unix() + 10; time.Now().Unix() > expiry; {
+		if n, err := conn.Read(b); n > 0 && err == nil {
+			return string(b[0:n])
+		}
+	}
+	return ""
+}
+
+// connect to access point
+func connectToAP() {
+	time.Sleep(2 * time.Second)
+	message("Connecting to " + ssid)
+	adaptor.SetPassphrase(ssid, pass)
+	for st, _ := adaptor.GetConnectionStatus(); st != wifinina.StatusConnected; {
+		message("Connection status: " + st.String())
+		time.Sleep(1 * time.Second)
+		st, _ = adaptor.GetConnectionStatus()
+	}
+	message("Connected.")
+	time.Sleep(2 * time.Second)
+	ip, _, _, err := adaptor.GetIP()
+	for ; err != nil; ip, _, _, err = adaptor.GetIP() {
+		message(err.Error())
+		time.Sleep(1 * time.Second)
+	}
+	message(ip.String())
+}
+
+func message(msg string) {
+	println(msg, "\r")
+}

examples/ws2812/digispark.go

@@ -0,0 +1,10 @@
+// +build digispark
+
+package main
+
+import "machine"
+
+// This is the pin assignment for the Digispark only.
+// Replace neo in the code below to match the pin
+// that you are using if different.
+var neo machine.Pin = 0

examples/ws2812/main.go

@@ -1,8 +1,7 @@
-// Connects to an WS2812 RGB LED strip with 10 LEDS, such as
-// on an Adafruit Circuit Playground Express board.
+// Connects to an WS2812 RGB LED strip with 10 LEDS.
 //
-// Replace machine.NEOPIXELS in the code below to match the pin
-// that you are using, if you have a different board.
+// See either the others.go or digispark.go files in this directory
+// for the neopixels pin assignments.
 package main
 
 import (
@@ -13,12 +12,15 @@ import (
 	"tinygo.org/x/drivers/ws2812"
 )
 
+var leds [10]color.RGBA
+
 func main() {
-	neo := machine.NEOPIXELS
+	led := machine.LED
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
+
 	neo.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
 	ws := ws2812.New(neo)
-	leds := make([]color.RGBA, 10)
 	rg := false
 
 	for {
@@ -33,7 +35,8 @@ func main() {
 			}
 		}
 
-		ws.WriteColors(leds)
+		ws.WriteColors(leds[:])
+		led.Set(rg)
 		time.Sleep(100 * time.Millisecond)
 	}
 }

examples/ws2812/others.go

@@ -0,0 +1,9 @@
+// +build !digispark
+
+package main
+
+import "machine"
+
+// Replace neo in the code below to match the pin
+// that you are using if different.
+var neo machine.Pin = machine.NEOPIXELS

flash/devices.go

@@ -0,0 +1,448 @@
+package flash
+
+import "time"
+
+// A DeviceIdentifier can be passed to the Configure() method of a flash Device
+// in order provide a means of discovery of device-specific attributes based on
+// the JEDEC ID read from the device.
+type DeviceIdentifier interface {
+	// Identify returns an Attrs struct based on the provided JEDEC ID
+	Identify(id JedecID) Attrs
+}
+
+// DeviceIdentifierFunc is a functional Identifier implementation
+type DeviceIdentifierFunc func(id JedecID) Attrs
+
+// Identify implements the Identifier interface
+func (fn DeviceIdentifierFunc) Identify(id JedecID) Attrs {
+	return fn(id)
+}
+
+// DefaultDeviceIndentifier is a DeviceIdentifier that is capable of recognizing
+// JEDEC IDs for all of the known memory devices in this package. If you are
+// have no way to be sure about the type of memory device that might be on a
+// board you are targeting, this can be a good starting point to use.  The
+// downside of using this function is that it will prevent the compiler from
+// being able to mark any of the functions for the various devices as unused,
+// resulting in larger code size.  If code size is a concern, and if you know
+// ahead of time you are only dealing with a limited set of memory devices, it
+// might be worthwhile to use your own implementation of a DeviceIdentifier
+// that only references those devices, so that more methods are marked unused.
+var DefaultDeviceIdentifier = DeviceIdentifierFunc(func(id JedecID) Attrs {
+	switch id.Uint32() {
+	case 0x010617:
+		return S25FL064L()
+	case 0x014015:
+		return S25FL216K()
+	case 0x1F4501:
+		return AT25DF081A()
+	case 0xC22015:
+		return MX25L1606()
+	case 0xC22016:
+		return MX25L3233F()
+	case 0xC22817:
+		return MX25R6435F()
+	case 0xC84015:
+		return GD25Q16C()
+	case 0xC84017:
+		return GD25Q64C()
+	case 0xEF4015:
+		return W25Q16JVIQ()
+	case 0xEF4016:
+		return W25Q32FV()
+	case 0xEF4017:
+		return W25Q64JVIQ()
+	case 0xEF4018:
+		return W25Q128JVSQ()
+	case 0xEF6014:
+		return W25Q80DL()
+	case 0xEF6015:
+		return W25Q16FW()
+	case 0xEF6016:
+		return W25Q32BV()
+	case 0xEF7015:
+		return W25Q16JVIM()
+	case 0xEF7016:
+		return W25Q32JVIM()
+	case 0xEF7017:
+		return W25Q64JVIM()
+	case 0xEF7018:
+		return W25Q128JVPM()
+	default:
+		return Attrs{JedecID: id}
+	}
+})
+
+// Settings for the Cypress (was Spansion) S25FL064L 8MiB SPI flash.
+// Datasheet: http://www.cypress.com/file/316661/download
+func S25FL064L() Attrs {
+	return Attrs{
+		TotalSize:           1 << 23, // 8 MiB
+		StartUp:             300 * time.Microsecond,
+		JedecID:             JedecID{0x01, 0x60, 0x17},
+		MaxClockSpeedMHz:    108,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Cypress (was Spansion) S25FL116K 2MiB SPI flash.
+// Datasheet: http://www.cypress.com/file/196886/download
+func S25FL116K() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             10000 * time.Microsecond,
+		JedecID:             JedecID{0x01, 0x40, 0x15},
+		MaxClockSpeedMHz:    108,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Cypress (was Spansion) S25FL216K 2MiB SPI flash.
+// Datasheet: http://www.cypress.com/file/197346/download
+func S25FL216K() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             10000 * time.Microsecond,
+		JedecID:             JedecID{0x01, 0x40, 0x15},
+		MaxClockSpeedMHz:    65,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Adesto Tech AT25DF081A 1MiB SPI flash. Its on the SAMD21
+// Xplained board.
+// Datasheet: https://www.adestotech.com/wp-content/uploads/doc8715.pdf
+func AT25DF081A() Attrs {
+	return Attrs{
+		TotalSize:           1 << 20, // 1 MiB
+		StartUp:             10000 * time.Microsecond,
+		JedecID:             JedecID{0x1F, 0x45, 0x01},
+		MaxClockSpeedMHz:    85,
+		QuadEnableBitMask:   0x00,
+		HasSectorProtection: true,
+		SupportsFastRead:    true,
+		SupportsQSPI:        false,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Macronix MX25L1606 2MiB SPI flash.
+// Datasheet:
+func MX25L1606() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB,
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xC2, 0x20, 0x15},
+		MaxClockSpeedMHz:    8,
+		QuadEnableBitMask:   0x40,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    true,
+	}
+}
+
+// Settings for the Macronix MX25L3233F 4MiB SPI flash.
+// Datasheet:
+// http://www.macronix.com/Lists/Datasheet/Attachments/7426/MX25L3233F,%203V,%2032Mb,%20v1.6.pdf
+func MX25L3233F() Attrs {
+	return Attrs{
+		TotalSize:           1 << 22, // 4 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xC2, 0x20, 0x16},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x40,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Macronix MX25R6435F 8MiB SPI flash.
+// Datasheet:
+// http://www.macronix.com/Lists/Datasheet/Attachments/7428/MX25R6435F,%20Wide%20Range,%2064Mb,%20v1.4.pdf
+// By default its in lower power mode which can only do 8mhz. In high power mode
+// it can do 80mhz.
+func MX25R6435F() Attrs {
+	return Attrs{
+		TotalSize:           1 << 23, // 8 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xC2, 0x28, 0x17},
+		MaxClockSpeedMHz:    8,
+		QuadEnableBitMask:   0x40,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    true,
+	}
+}
+
+// Settings for the Gigadevice GD25Q16C 2MiB SPI flash.
+// Datasheet: http://www.gigadevice.com/datasheet/gd25q16c/
+func GD25Q16C() Attrs {
+	return Attrs{
+		TotalSize:          1 << 21, // 2 MiB
+		StartUp:            5000 * time.Microsecond,
+		JedecID:            JedecID{0xC8, 0x40, 0x15},
+		MaxClockSpeedMHz:   104,
+		QuadEnableBitMask:  0x02,
+		SupportsFastRead:   true,
+		SupportsQSPI:       true,
+		SupportsQSPIWrites: true,
+		WriteStatusSplit:   false,
+		SingleStatusByte:   false,
+	}
+}
+
+// Settings for the Gigadevice GD25Q64C 8MiB SPI flash.
+// Datasheet: http://www.elm-tech.com/en/products/spi-flash-memory/gd25q64/gd25q64.pdf
+func GD25Q64C() Attrs {
+	return Attrs{
+		TotalSize:           1 << 23, // 8 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xC8, 0x40, 0x17},
+		MaxClockSpeedMHz:    104,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    true,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q16JV-IQ 2MiB SPI flash. Note that JV-IM has a
+// different .memory_type (0x70) Datasheet:
+// https://www.winbond.com/resource-files/w25q16jv%20spi%20revf%2005092017.pdf
+func W25Q16JVIQ() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x40, 0x15},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q16FW 2MiB SPI flash.
+// Datasheet:
+// https://www.winbond.com/resource-files/w25q16fw%20revj%2005182017%20sfdp.pdf
+func W25Q16FW() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x60, 0x15},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q16JV-IM 2MiB SPI flash. Note that JV-IQ has a
+// different .memory_type (0x40) Datasheet:
+// https://www.winbond.com/resource-files/w25q16jv%20spi%20revf%2005092017.pdf
+func W25Q16JVIM() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x70, 0x15},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q32BV 4MiB SPI flash.
+// Datasheet:
+// https://www.winbond.com/resource-files/w25q32bv_revi_100413_wo_automotive.pdf
+func W25Q32BV() Attrs {
+	return Attrs{
+		TotalSize:           1 << 22, // 4 MiB
+		StartUp:             10000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x60, 0x16},
+		MaxClockSpeedMHz:    104,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q32JV-IM 4MiB SPI flash.
+// Datasheet:
+// https://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf
+func W25Q32JVIM() Attrs {
+	return Attrs{
+		TotalSize:           1 << 22, // 4 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x70, 0x16},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q64JV-IM 8MiB SPI flash. Note that JV-IQ has a
+// different .memory_type (0x40) Datasheet:
+// http://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf
+func W25Q64JVIM() Attrs {
+	return Attrs{
+		TotalSize:           1 << 23, // 8 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x70, 0x17},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q64JV-IQ 8MiB SPI flash. Note that JV-IM has a
+// different .memory_type (0x70) Datasheet:
+// http://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf
+func W25Q64JVIQ() Attrs {
+	return Attrs{
+		TotalSize:           1 << 23, // 8 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x40, 0x17},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q80DL 1MiB SPI flash.
+// Datasheet:
+// https://www.winbond.com/resource-files/w25q80dv%20dl_revh_10022015.pdf
+func W25Q80DL() Attrs {
+	return Attrs{
+		TotalSize:           1 << 20, // 1 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x60, 0x14},
+		MaxClockSpeedMHz:    104,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q128JV-SQ 16MiB SPI flash. Note that JV-IM has a
+// different .memory_type (0x70) Datasheet:
+// https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
+func W25Q128JVSQ() Attrs {
+	return Attrs{
+		TotalSize:           1 << 24, // 16 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x40, 0x18},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q128JV-PM 16MiB SPI flash. Note that JV-IM has a
+// different .memory_type (0x70) Datasheet:
+// https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
+func W25Q128JVPM() Attrs {
+	return Attrs{
+		TotalSize:           1 << 24, // 16 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x70, 0x18},
+		MaxClockSpeedMHz:    133,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q32FV 4MiB SPI flash.
+// Datasheet:http://www.winbond.com/resource-files/w25q32fv%20revj%2006032016.pdf?__locale=en
+func W25Q32FV() Attrs {
+	return Attrs{
+		TotalSize:           1 << 22, // 4 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x40, 0x16},
+		MaxClockSpeedMHz:    104,
+		QuadEnableBitMask:   0x00,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        false,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}

flash/flash.go

@@ -0,0 +1,405 @@
+package flash
+
+import (
+	"time"
+)
+
+const (
+	// BlockSize is the number of bytes in a block for most/all NOR flash memory
+	BlockSize = 64 * 1024
+
+	// SectorSize is the number of bytes in a sector for most/all NOR flash memory
+	SectorSize = 4 * 1024
+
+	// PageSize is the number of bytes in a page for most/all NOR flash memory
+	PageSize = 256
+)
+
+// Device represents a NOR flash memory device accessible using SPI
+type Device struct {
+	trans transport
+	attrs Attrs
+}
+
+// DeviceConfig contains the parameters that can be set when configuring a
+// flash memory device.
+type DeviceConfig struct {
+	Identifier DeviceIdentifier
+}
+
+// JedecID encapsules the ID values that unique identify a flash memory device.
+type JedecID struct {
+	ManufID  uint8
+	MemType  uint8
+	Capacity uint8
+}
+
+// Uint32 returns the JEDEC ID packed into a uint32
+func (id JedecID) Uint32() uint32 {
+	return uint32(id.ManufID)<<16 | uint32(id.MemType)<<8 | uint32(id.Capacity)
+}
+
+// SerialNumber represents a serial number read from a flash memory device
+type SerialNumber uint64
+
+// Attrs represent the differences in hardware characteristics and capabilities
+// of various SPI flash memory devices.
+type Attrs struct {
+
+	// TotalSize is the number of bytes that the flash device can store
+	TotalSize uint32
+
+	// StartUp is the duration of time between when the device is reset and when
+	// it is ready to operation
+	StartUp time.Duration
+
+	// Three response bytes to 0x9f JEDEC ID command.
+	JedecID
+
+	// Max clock speed for all operations and the fastest read mode.
+	MaxClockSpeedMHz uint8
+
+	// Bitmask for Quad Enable bit if present. 0x00 otherwise. This is for the
+	// highest byte in the status register.
+	QuadEnableBitMask uint8
+
+	HasSectorProtection bool
+
+	// Supports the 0x0b fast read command with 8 dummy cycles.
+	SupportsFastRead bool
+
+	// Supports the fast read, quad output command 0x6b with 8 dummy cycles.
+	SupportsQSPI bool
+
+	// Supports the quad input page program command 0x32. This is known as 1-1-4
+	// because it only uses all four lines for data.
+	SupportsQSPIWrites bool
+
+	// Requires a separate command 0x31 to write to the second byte of the status
+	// register. Otherwise two byte are written via 0x01.
+	WriteStatusSplit bool
+
+	// True when the status register is a single byte. This implies the Quad
+	// Enable bit is in the first byte and the Read Status Register 2 command
+	// (0x35) is unsupported.
+	SingleStatusByte bool
+}
+
+// Configure sets up the device and the underlying transport mechanism.  The
+// DeviceConfig argument allows the caller to specify an instance of the
+// DeviceIdentifier interface that, if provided, will be used to retrieve the
+// attributes of the device based on the JEDEC ID.
+func (dev *Device) Configure(config *DeviceConfig) (err error) {
+
+	dev.trans.configure(config)
+
+	var id JedecID
+	if id, err = dev.ReadJEDEC(); err != nil {
+		return err
+	}
+
+	// try to ascertain the vendor-specific attributes of the chip using the
+	// provided Identifier
+	if config.Identifier != nil {
+		dev.attrs = config.Identifier.Identify(id)
+	} else {
+		dev.attrs = Attrs{JedecID: id}
+	}
+
+	// We don't know what state the flash is in so wait for any remaining
+	// writes and then reset.
+
+	// The write in progress bit should be low.
+	for s, err := dev.ReadStatus(); (s & 0x01) > 0; s, err = dev.ReadStatus() {
+		if err != nil {
+			return err
+		}
+	}
+	// The suspended write/erase bit should be low.
+	for s, err := dev.ReadStatus2(); (s & 0x80) > 0; s, err = dev.ReadStatus2() {
+		if err != nil {
+			return err
+		}
+	}
+	// perform device reset
+	if err := dev.trans.runCommand(cmdEnableReset); err != nil {
+		return err
+	}
+	if err := dev.trans.runCommand(cmdReset); err != nil {
+		return err
+	}
+
+	// Wait for the reset - 30us by default
+	time.Sleep(30 * time.Microsecond)
+
+	// Speed up to max device frequency
+	if dev.attrs.MaxClockSpeedMHz > 0 {
+		err := dev.trans.setClockSpeed(uint32(dev.attrs.MaxClockSpeedMHz) * 1e6)
+		if err != nil {
+			return err
+		}
+	}
+
+	// Enable Quad Mode if available
+	if dev.trans.supportQuadMode() && dev.attrs.QuadEnableBitMask > 0 {
+		// Verify that QSPI mode is enabled.
+		var status byte
+		if dev.attrs.SingleStatusByte {
+			status, err = dev.ReadStatus()
+		} else {
+			status, err = dev.ReadStatus2()
+		}
+		if err != nil {
+			return err
+		}
+		// Check and set the quad enable bit.
+		if status&dev.attrs.QuadEnableBitMask == 0 {
+			if err := dev.WriteEnable(); err != nil {
+				return err
+			}
+			fullStatus := []byte{0x00, dev.attrs.QuadEnableBitMask}
+			if dev.attrs.WriteStatusSplit {
+				err = dev.trans.writeCommand(cmdWriteStatus2, fullStatus[1:])
+			} else if dev.attrs.SingleStatusByte {
+				err = dev.trans.writeCommand(cmdWriteStatus, fullStatus[1:])
+			} else {
+				err = dev.trans.writeCommand(cmdWriteStatus, fullStatus)
+			}
+			if err != nil {
+				return err
+			}
+		}
+	}
+
+	// disable sector protection if the chip has it
+	if dev.attrs.HasSectorProtection {
+		if err := dev.WriteEnable(); err != nil {
+			return err
+		}
+		if err := dev.trans.writeCommand(cmdWriteStatus, []byte{0x00}); err != nil {
+			return err
+		}
+	}
+
+	// write disable
+	if err := dev.trans.runCommand(cmdWriteDisable); err != nil {
+		return err
+	}
+	return dev.WaitUntilReady()
+}
+
+// Attrs returns the attributes of the device determined from the most recent
+// call to Configure(). If no call to Configure() has been made, this will be
+// the zero value of the Attrs struct.
+func (dev *Device) Attrs() Attrs {
+	return dev.attrs
+}
+
+// ReadJEDEC reads the JEDEC ID from the device; this ID can then be used to
+// ascertain the attributes of the chip from a list of known devices.
+func (dev *Device) ReadJEDEC() (JedecID, error) {
+	jedecID := make([]byte, 3)
+	if err := dev.trans.readCommand(cmdReadJedecID, jedecID); err != nil {
+		return JedecID{}, err
+	}
+	return JedecID{jedecID[0], jedecID[1], jedecID[2]}, nil
+}
+
+// ReadSerialNumber reads the serial numbers from the connected device.
+// TODO: maybe check if byte order / endianess is correct, probably is not
+func (dev *Device) ReadSerialNumber() (SerialNumber, error) {
+	sn := make([]byte, 12)
+	if err := dev.trans.readCommand(0x4B, sn); err != nil {
+		return 0, err
+	}
+	return SerialNumber(uint64(sn[11]) | uint64(sn[10])<<0x8 |
+		uint64(sn[9])<<0x10 | uint64(sn[8])<<0x18 | uint64(sn[7])<<0x20 |
+		uint64(sn[6])<<0x28 | uint64(sn[5])<<0x30 | uint64(sn[4])<<0x38), nil
+}
+
+// Size returns the size of this memory, in bytes.
+func (dev *Device) Size() int64 {
+	if dev.attrs.TotalSize < 1 {
+		// in case a DeviceIdentifier function wasn't used, use the capacity
+		// specified in the JEDEC ID instead
+		return int64(dev.attrs.Capacity)
+	}
+	return int64(dev.attrs.TotalSize)
+}
+
+// ReadAt satisfies the io.ReaderAt interface, and fills the provided buffer
+// with memory read from the device starting at the provided address.
+func (dev *Device) ReadAt(buf []byte, addr int64) (int, error) {
+	if err := dev.WaitUntilReady(); err != nil {
+		return 0, err
+	}
+	if err := dev.trans.readMemory(uint32(addr), buf); err != nil {
+		return 0, err
+	}
+	return len(buf), nil
+}
+
+// WriteAt satisfies the io.WriterAt interface and writes data to the device,
+// one page at a time, starting at the provided address. This method assumes
+// that the destination is already erased.
+func (dev *Device) WriteAt(buf []byte, addr int64) (n int, err error) {
+	remain := uint32(len(buf))
+	idx := uint32(0)
+	loc := uint32(addr)
+	for remain > 0 {
+		if err = dev.WaitUntilReady(); err != nil {
+			return
+		}
+		if err = dev.WriteEnable(); err != nil {
+			return
+		}
+		leftOnPage := PageSize - (loc & (PageSize - 1))
+		toWrite := remain
+		if leftOnPage < remain {
+			toWrite = leftOnPage
+		}
+		if err = dev.trans.writeMemory(loc, buf[idx:idx+toWrite]); err != nil {
+			return
+		}
+		idx += toWrite
+		loc += toWrite
+		remain -= toWrite
+	}
+	return len(buf) - int(remain), nil
+}
+
+// WriteBlockSize returns the block size in which data can be written to
+// memory. It can be used by a client to optimize writes, non-aligned writes
+// should always work correctly.
+// For SPI NOR flash this is the page size, usually/always 256.
+func (dev *Device) WriteBlockSize() int64 {
+	return PageSize
+}
+
+// EraseBlockSize returns the smallest erasable area on this particular chip
+// in bytes. This is used for the block size in EraseBlocks.
+// For SPI NOR flash this is the sector size, usually/always 4096.
+func (dev *Device) EraseBlockSize() int64 {
+	return SectorSize
+}
+
+// EraseBlocks erases the given number of blocks. An implementation may
+// transparently coalesce ranges of blocks into larger bundles if the chip
+// supports this. The start and len parameters are in block numbers, use
+// EraseBlockSize to map addresses to blocks.
+func (dev *Device) EraseBlocks(start, len int64) error {
+	// TODO: maybe combine sector erase operations into block erase operations
+	for i := start; i < start+len; i++ {
+		if err := dev.EraseSector(uint32(i)); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func (dev *Device) WriteEnable() error {
+	return dev.trans.runCommand(cmdWriteEnable)
+}
+
+// EraseBlock erases a block of memory at the specified index
+func (dev *Device) EraseBlock(blockNumber uint32) error {
+	if err := dev.WaitUntilReady(); err != nil {
+		return err
+	}
+	if err := dev.WriteEnable(); err != nil {
+		return err
+	}
+	return dev.trans.eraseCommand(cmdEraseBlock, blockNumber*BlockSize)
+}
+
+// EraseSector erases a sector of memory at the given index
+func (dev *Device) EraseSector(sectorNumber uint32) error {
+	if err := dev.WaitUntilReady(); err != nil {
+		return err
+	}
+	if err := dev.WriteEnable(); err != nil {
+		return err
+	}
+	return dev.trans.eraseCommand(cmdEraseSector, sectorNumber*SectorSize)
+}
+
+// EraseChip erases the entire flash memory chip
+func (dev *Device) EraseAll() error {
+	if err := dev.WaitUntilReady(); err != nil {
+		return err
+	}
+	if err := dev.WriteEnable(); err != nil {
+		return err
+	}
+	return dev.trans.runCommand(cmdEraseChip)
+}
+
+// ReadStatus reads the value from status register 1 of the device
+func (dev *Device) ReadStatus() (status byte, err error) {
+	buf := make([]byte, 1)
+	err = dev.trans.readCommand(cmdReadStatus, buf)
+	return buf[0], err
+}
+
+// ReadStatus2 reads the value from status register 2 of the device
+func (dev *Device) ReadStatus2() (status byte, err error) {
+	buf := make([]byte, 1)
+	err = dev.trans.readCommand(cmdReadStatus2, buf)
+	return buf[0], err
+}
+
+// WaitUntilReady queries the status register until the device is ready for the
+// next operation.
+func (dev *Device) WaitUntilReady() error {
+	expire := time.Now().UnixNano() + int64(1*time.Second)
+	for s, err := dev.ReadStatus(); (s & 0x03) > 0; s, err = dev.ReadStatus() {
+		if err != nil {
+			return err
+		}
+		if time.Now().UnixNano() > expire {
+			return ErrWaitExpired
+		}
+	}
+	return nil
+}
+
+const (
+	cmdRead            = 0x03 // read memory using single-bit transfer
+	cmdQuadRead        = 0x6B // read with 1 line address, 4 line data
+	cmdReadJedecID     = 0x9F // read the JEDEC ID from the device
+	cmdPageProgram     = 0x02 // write a page of memory using single-bit transfer
+	cmdQuadPageProgram = 0x32 // write with 1 line address, 4 line data
+	cmdReadStatus      = 0x05 // read status register 1
+	cmdReadStatus2     = 0x35 // read status register 2
+	cmdWriteStatus     = 0x01 // write status register 1
+	cmdWriteStatus2    = 0x31 // write status register 2
+	cmdEnableReset     = 0x66 // enable reset
+	cmdReset           = 0x99 // perform reset
+	cmdWriteEnable     = 0x06 // write-enable memory
+	cmdWriteDisable    = 0x04 // write-protect memory
+	cmdEraseSector     = 0x20 // erase a sector of memory
+	cmdEraseBlock      = 0xD8 // erase a block of memory
+	cmdEraseChip       = 0xC7 // erase the entire chip
+)
+
+type Error uint8
+
+const (
+	_                          = iota
+	ErrInvalidClockSpeed Error = iota
+	ErrInvalidAddrRange
+	ErrWaitExpired
+)
+
+func (err Error) Error() string {
+	switch err {
+	case ErrInvalidClockSpeed:
+		return "flash: invalid clock speed"
+	case ErrInvalidAddrRange:
+		return "flash: invalid address range"
+	case ErrWaitExpired:
+		return "flash: wait until ready expired"
+	default:
+		return "flash: unspecified error"
+	}
+}

flash/transport_qspi_samd.go

@@ -0,0 +1,247 @@
+// +build atsamd51
+
+package flash
+
+import (
+	"device/sam"
+	"machine"
+	"runtime/volatile"
+	"unsafe"
+)
+
+// NewQSPI returns a pointer to a flash device that uses the QSPI peripheral to
+// communicate with a serial memory chip.
+func NewQSPI(cs, sck, d0, d1, d2, d3 machine.Pin) *Device {
+	return &Device{
+		trans: &qspiTransport{
+			cs:  cs,
+			sck: sck,
+			d0:  d0,
+			d1:  d1,
+			d2:  d2,
+			d3:  d3,
+		},
+	}
+}
+
+// QSPI address space on SAMD51 is 0x04000000 to 0x05000000
+const (
+	// Low address of the QSPI address space on SAMD51
+	qspi_AHB_LO = 0x04000000
+
+	// High address of the QSPI address space on SAMD51
+	qspi_AHB_HI = 0x05000000
+
+	// Instruction frame for running sending a command to the device
+	iframeRunCommand = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_READ << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+
+	// Instruction frame for running a command that returns data
+	iframeReadCommand = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		sam.QSPI_INSTRFRAME_DATAEN |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_READ << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+
+	// Instruction frame to set up the device to read from memory
+	iframeReadMemory = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		sam.QSPI_INSTRFRAME_DATAEN |
+		sam.QSPI_INSTRFRAME_ADDREN |
+		(8 << sam.QSPI_INSTRFRAME_DUMMYLEN_Pos) |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_READMEMORY << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+
+	// Instruction frame for running a command that requires parameter data
+	iframeWriteCommand = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_WRITE << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+
+	// Instruction frame to set up the device for writing to memory
+	iframeWriteMemory = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		sam.QSPI_INSTRFRAME_ADDREN |
+		sam.QSPI_INSTRFRAME_DATAEN |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_WRITEMEMORY << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+
+	// Instruction frame for running an erase command that requires and address
+	iframeEraseCommand = 0x0 |
+		sam.QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
+		sam.QSPI_INSTRFRAME_ADDRLEN_24BITS |
+		sam.QSPI_INSTRFRAME_INSTREN |
+		sam.QSPI_INSTRFRAME_ADDREN |
+		(sam.QSPI_INSTRFRAME_TFRTYPE_WRITE << sam.QSPI_INSTRFRAME_TFRTYPE_Pos)
+)
+
+type qspiTransport struct {
+	cs  machine.Pin
+	sck machine.Pin
+	d0  machine.Pin
+	d1  machine.Pin
+	d2  machine.Pin
+	d3  machine.Pin
+}
+
+func (q qspiTransport) configure(config *DeviceConfig) {
+
+	// enable main clocks
+	sam.MCLK.APBCMASK.SetBits(sam.MCLK_APBCMASK_QSPI_)
+	sam.MCLK.AHBMASK.SetBits(sam.MCLK_AHBMASK_QSPI_)
+	sam.MCLK.AHBMASK.ClearBits(sam.MCLK_AHBMASK_QSPI_2X_)
+
+	sam.QSPI.CTRLA.SetBits(sam.QSPI_CTRLA_SWRST)
+
+	// enable all pins to be PinCom
+	q.d0.Configure(machine.PinConfig{Mode: machine.PinCom})
+	q.d1.Configure(machine.PinConfig{Mode: machine.PinCom})
+	q.d2.Configure(machine.PinConfig{Mode: machine.PinCom})
+	q.d3.Configure(machine.PinConfig{Mode: machine.PinCom})
+	q.cs.Configure(machine.PinConfig{Mode: machine.PinCom})
+	q.sck.Configure(machine.PinConfig{Mode: machine.PinCom})
+
+	// start out with 4Mhz
+	// can ignore the error, 4Mhz is always a valid speed
+	_ = q.setClockSpeed(4e6)
+
+	// configure the CTRLB register
+	sam.QSPI.CTRLB.Set(sam.QSPI_CTRLB_MODE_MEMORY |
+		(sam.QSPI_CTRLB_DATALEN_8BITS << sam.QSPI_CTRLB_DATALEN_Pos) |
+		(sam.QSPI_CTRLB_CSMODE_LASTXFER << sam.QSPI_CTRLB_CSMODE_Pos))
+
+	// enable the peripheral
+	sam.QSPI.CTRLA.SetBits(sam.QSPI_CTRLA_ENABLE)
+}
+
+func (q qspiTransport) supportQuadMode() bool {
+	return true
+}
+
+func (q qspiTransport) setClockSpeed(hz uint32) error {
+	// The clock speed for the QSPI peripheral is controlled by a divider, so
+	// we can't set the requested speed exactly. Instead we will increment the
+	// divider until the speed is less than or equal to the speed requested.
+	for div, freq := uint32(1), machine.CPUFrequency(); div < 256; div++ {
+		if freq/div <= hz {
+			sam.QSPI.BAUD.Set(div << sam.QSPI_BAUD_BAUD_Pos)
+			return nil
+		}
+	}
+	return ErrInvalidClockSpeed
+}
+
+func (q qspiTransport) runCommand(cmd byte) (err error) {
+	q.runInstruction(cmd, iframeRunCommand)
+	q.endTransfer()
+	return
+}
+
+func (q qspiTransport) readCommand(cmd byte, buf []byte) (err error) {
+	q.disableAndClearCache()
+	q.runInstruction(cmd, iframeReadCommand)
+	q.readInto(buf, 0)
+	q.endTransfer()
+	q.enableCache()
+	return
+}
+
+func (q qspiTransport) readMemory(addr uint32, buf []byte) (err error) {
+	if (addr + uint32(len(buf))) > (qspi_AHB_HI - qspi_AHB_LO) {
+		return ErrInvalidAddrRange
+	}
+	q.disableAndClearCache()
+	q.runInstruction(cmdQuadRead, iframeReadMemory)
+	q.readInto(buf, addr)
+	q.endTransfer()
+	q.enableCache()
+	return
+}
+
+func (q qspiTransport) writeCommand(cmd byte, data []byte) (err error) {
+	var dataen uint32
+	if len(data) > 0 {
+		dataen = sam.QSPI_INSTRFRAME_DATAEN
+	}
+	q.disableAndClearCache()
+	q.runInstruction(cmd, iframeWriteCommand|dataen)
+	q.writeFrom(data, 0)
+	q.endTransfer()
+	q.enableCache()
+	return
+}
+
+func (q qspiTransport) writeMemory(addr uint32, data []byte) (err error) {
+	if (addr + uint32(len(data))) > (qspi_AHB_HI - qspi_AHB_LO) {
+		return ErrInvalidAddrRange
+	}
+	q.disableAndClearCache()
+	q.runInstruction(cmdQuadPageProgram, iframeWriteMemory)
+	q.writeFrom(data, addr)
+	q.endTransfer()
+	q.enableCache()
+	return
+}
+
+func (q qspiTransport) eraseCommand(cmd byte, addr uint32) (err error) {
+	q.disableAndClearCache()
+	sam.QSPI.INSTRADDR.Set(addr)
+	q.runInstruction(cmd, iframeEraseCommand)
+	q.endTransfer()
+	q.enableCache()
+	return
+}
+
+func (q qspiTransport) runInstruction(cmd byte, iframe uint32) {
+	sam.QSPI.INSTRCTRL.Set(uint32(cmd))
+	sam.QSPI.INSTRFRAME.Set(iframe)
+	sam.QSPI.INSTRFRAME.Get() // dummy read for synchronization, as per datasheet
+}
+
+func (q qspiTransport) enableCache() {
+	sam.CMCC.CTRL.SetBits(sam.CMCC_CTRL_CEN)
+}
+
+func (q qspiTransport) disableAndClearCache() {
+	sam.CMCC.CTRL.ClearBits(sam.CMCC_CTRL_CEN)
+	for sam.CMCC.SR.HasBits(sam.CMCC_SR_CSTS) {
+	}
+	sam.CMCC.MAINT0.SetBits(sam.CMCC_MAINT0_INVALL)
+}
+
+func (q qspiTransport) endTransfer() {
+	sam.QSPI.CTRLA.Set(sam.QSPI_CTRLA_ENABLE | sam.QSPI_CTRLA_LASTXFER)
+	for !sam.QSPI.INTFLAG.HasBits(sam.QSPI_INTFLAG_INSTREND) {
+	}
+	sam.QSPI.INTFLAG.Set(sam.QSPI_INTFLAG_INSTREND)
+}
+
+func (q qspiTransport) readInto(buf []byte, addr uint32) {
+	var ptr = qspi_AHB_LO + uintptr(addr)
+	for i := range buf {
+		buf[i] = volatile.LoadUint8((*uint8)(unsafe.Pointer(ptr)))
+		ptr++
+	}
+	/* // NB(bcg): for some reason this reads data that results from commands in
+	   // a different byte order than the loop above, but works fine for reading
+	   // from memory. Oddly, the above loop seems to work fine in both cases.
+		ln := len(buf)
+		sl := (*[1 << 28]byte)(unsafe.Pointer(uintptr(qspi_AHB_LO + addr)))[:ln:ln]
+		copy(buf, sl)
+	*/
+}
+
+func (q qspiTransport) writeFrom(buf []byte, addr uint32) {
+	var ptr = qspi_AHB_LO + uintptr(addr)
+	for i := range buf {
+		volatile.StoreUint8((*uint8)(unsafe.Pointer(ptr)), buf[i])
+		ptr++
+	}
+}

flash/transport_spi.go

@@ -0,0 +1,154 @@
+package flash
+
+import "machine"
+
+type transport interface {
+	configure(config *DeviceConfig)
+	supportQuadMode() bool
+	setClockSpeed(hz uint32) (err error)
+	runCommand(cmd byte) (err error)
+	readCommand(cmd byte, rsp []byte) (err error)
+	writeCommand(cmd byte, data []byte) (err error)
+	eraseCommand(cmd byte, address uint32) (err error)
+	readMemory(addr uint32, rsp []byte) (err error)
+	writeMemory(addr uint32, data []byte) (err error)
+}
+
+// NewSPI returns a pointer to a flash device that uses a SPI peripheral to
+// communicate with a serial memory chip.
+func NewSPI(spi *machine.SPI, sdo, sdi, sck, cs machine.Pin) *Device {
+	return &Device{
+		trans: &spiTransport{
+			spi: spi,
+			sdo: sdo,
+			sdi: sdi,
+			sck: sck,
+			ss:  cs,
+		},
+	}
+}
+
+type spiTransport struct {
+	spi *machine.SPI
+	sdo machine.Pin
+	sdi machine.Pin
+	sck machine.Pin
+	ss  machine.Pin
+}
+
+func (tr *spiTransport) configure(config *DeviceConfig) {
+	// Configure spi bus
+	tr.setClockSpeed(5000000)
+
+	// Configure chip select pin
+	tr.ss.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	tr.ss.High()
+}
+
+func (tr *spiTransport) setClockSpeed(hz uint32) error {
+	// TODO: un-hardcode this max speed; it is probably a sensible
+	//       default maximum for atsamd and nrf at least
+	if hz > 24*1e6 {
+		hz = 24 * 1e6
+	}
+	tr.spi.Configure(machine.SPIConfig{
+		Frequency: hz,
+		SDI:       tr.sdi,
+		SDO:       tr.sdo,
+		SCK:       tr.sck,
+		LSBFirst:  false,
+		Mode:      0,
+	})
+	return nil
+}
+
+func (tr *spiTransport) supportQuadMode() bool {
+	return false
+}
+
+func (tr *spiTransport) runCommand(cmd byte) (err error) {
+	tr.ss.Low()
+	_, err = tr.spi.Transfer(byte(cmd))
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) readCommand(cmd byte, rsp []byte) (err error) {
+	tr.ss.Low()
+	if _, err := tr.spi.Transfer(byte(cmd)); err == nil {
+		err = tr.readInto(rsp)
+	}
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) readCommandByte(cmd byte) (rsp byte, err error) {
+	tr.ss.Low()
+	if _, err := tr.spi.Transfer(byte(cmd)); err == nil {
+		rsp, err = tr.spi.Transfer(0xFF)
+	}
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) writeCommand(cmd byte, data []byte) (err error) {
+	tr.ss.Low()
+	if _, err := tr.spi.Transfer(byte(cmd)); err == nil {
+		err = tr.writeFrom(data)
+	}
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) eraseCommand(cmd byte, address uint32) (err error) {
+	tr.ss.Low()
+	err = tr.sendAddress(cmd, address)
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) readMemory(addr uint32, rsp []byte) (err error) {
+	tr.ss.Low()
+	if err = tr.sendAddress(cmdRead, addr); err == nil {
+		err = tr.readInto(rsp)
+	}
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) writeMemory(addr uint32, data []byte) (err error) {
+	tr.ss.Low()
+	if err = tr.sendAddress(cmdPageProgram, addr); err == nil {
+		err = tr.writeFrom(data)
+	}
+	tr.ss.High()
+	return
+}
+
+func (tr *spiTransport) sendAddress(cmd byte, addr uint32) error {
+	_, err := tr.spi.Transfer(byte(cmd))
+	if err == nil {
+		_, err = tr.spi.Transfer(byte((addr >> 16) & 0xFF))
+	}
+	if err == nil {
+		_, err = tr.spi.Transfer(byte((addr >> 8) & 0xFF))
+	}
+	if err == nil {
+		_, err = tr.spi.Transfer(byte(addr & 0xFF))
+	}
+	return err
+}
+
+func (tr *spiTransport) readInto(rsp []byte) (err error) {
+	for i, c := 0, len(rsp); i < c && err == nil; i++ {
+		rsp[i], err = tr.spi.Transfer(0xFF)
+	}
+	return
+}
+
+func (tr *spiTransport) writeFrom(data []byte) (err error) {
+	for i, c := 0, len(data); i < c && err == nil; i++ {
+		_, err = tr.spi.Transfer(data[i])
+	}
+	return
+}

go.mod

@@ -0,0 +1,8 @@
+module tinygo.org/x/drivers
+
+go 1.15
+
+require (
+	github.com/eclipse/paho.mqtt.golang v1.2.0
+	github.com/frankban/quicktest v1.10.2
+)