lorawan: increment devnonce don't just create a new one each join attempt

Signed-off-by: deadprogram <ron@hybridgroup.com>

.circleci/config.yml

@@ -1,20 +0,0 @@
-# Golang CircleCI 2.0 configuration file
-#
-# Check https://circleci.com/docs/2.0/language-go/ for more details
-version: 2
-jobs:
-  build:
-    docker:
-      - image: tinygo/tinygo-dev
-    steps:
-      - checkout
-      - run: tinygo version
-      - run:
-          name: "Enforce Go Formatted Code"
-          command: make fmt-check
-      - run:
-          name: "Run unit tests"
-          command: make unit-test
-      - run:
-          name: "Run build and smoke tests"
-          command: make smoke-test

.github/workflows/build.yml

@@ -0,0 +1,25 @@
+name: Build
+
+on:
+  pull_request:
+  push:
+    branches:
+      - dev
+      - release
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: tinygo/tinygo-dev
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+      - name: TinyGo version check
+        run: tinygo version
+      - name: Enforce Go Formatted Code
+        run: make fmt-check
+      - name: Run unit tests
+        run: make unit-test
+      - name: Run build and smoke tests
+        run: make smoke-test

CHANGELOG.md

@@ -1,3 +1,189 @@
+0.23.0
+---
+- **new devices**
+    - Add GC9A01 Driver (#452)
+    - Initial support for VL6180x sensor
+
+- **enhancements**
+    - **rtl8720dn**
+        - refactor by bringing this driver more in line with wifinina and espat
+    - **ssd1306**
+        - add getter method to the current buffer
+    - **makeybutton**
+        - revise to better match the algorithm defined by the original
+    - **espat,wifinina,rtl8720dn**
+        - change ssid/pass from const to var
+
+- **bugfixes**
+    - **microbitmatrix**
+        - fix inverted axis
+    - **espat**
+        - Trim quotes from IP returned by espat's GetDNS()
+    - **all**
+        - correct go fmt
+
+- **examples**
+    - **rtl8720dn**
+        - remove wifi setting
+        - add call to optional debug setting
+        - update all remaining examples for refactored API
+
+
+0.22.0
+---
+- **new devices**
+    - epd: add waveshare 2.9in (v1)
+    - makeybutton: add driver for MakeyMakey-like button
+
+- **enhancements**
+    - **rtl8720dn**
+        - add UDP close function
+        - improve error handling
+    - **net/http**
+        - improve header parsing
+        - add last-will-and-testament to MQTT
+    - **net/mqtt**
+        - adds keepalive pinging, disconnect, and graceful goroutine cleanup
+        - support for cookies when https
+        - add support for retained messsages
+
+- **bugfixes**
+    - irremote: Fix irremote reporting incorrect NEC addresses and command codes (#422)
+    - net/http:  Fix http.Get() with port specification
+
+- **build**
+    - Makefile recursively finds unit-tests
+    - switching to GHA
+
+- **updates**
+    - update tinyfont to v0.3.0
+    - update tinyfs to v0.2.0
+
+- **examples**
+    - rtl8720dn: add ./examples/rtl8720dn/version
+
+
+0.21.0
+---
+- **new devices**
+    - lsm6ds3tr: initial implementation
+    - UC8151: used in Pimoroni's badger2040 e-paper (#416)
+    - scd4x: implement driver for CO2 sensor
+
+- **enhancements**
+    - easystepper: Add support for '8-step mode'
+    - vl53l1x: Add functions for setting the device address
+    - sdcard: support thingplus-rp2040
+    - wifinina: add mutex to prevent communication race problems
+    - **ws2812**
+        - support thingplus-rp2040 board
+        - Added 125 MHz rp2040 timing
+        - Added unsafe.Pointer for pointer conversion
+
+- **bugfixes**
+    - ssd1351: Fix mirrored text on OLED display
+
+
+0.20.0
+---
+- **new devices**
+    - irremote: Add basic infra-red driver
+    - IS31FL3731: add driver for IS31FL3731 matrix LED driver (#370)
+    - l3gd20: add gyro driver
+    - SSD1289: Driver for SSD1289 LCD
+
+- **enhancements**
+    - **ili9341**
+        - add support for atsame5x
+        - added Feather board support to InitDisplay()
+        - avoid heap allocations
+    - **lps22hb**
+        - pin rename, sync with main repo
+    - **lsmXXX**
+        - unified, error handling, memory management
+    - **max7xx**
+        - Add a SetIntensity() function to max7xx driver and example
+    - **vl53l1x**
+        - Add functions for setting 'region of interest'
+        - Fix switch-case semantics
+    - **ws2812**
+        - add support for m5stamp-c3
+        - convert AVR assembly to C inline assembly
+        - support high-MHz ARMv6M chips like the RP2040
+        - write inline assembly using C instead of Go
+
+- **bugfixes**
+    - **dht**
+        - fix error check in example
+        - fix humidity and temperature extraction for DHT22 (#358)
+    - **esp8266**
+        - fix ConnectToAccessPoint timeout args
+    - **image**
+        - fix interface
+    - **pca9685**
+        - add buffered one shot write
+        - fix on=0 bug
+    - **wifinina**
+        - correct sendParamStr to handle empty strings, such as when connecting to an unsecured access point
+
+0.19.0
+---
+- **new devices**
+    - ft6336: add support for ft6336
+    - pca9685: PCA9685 driver
+    - shtc3: Sensirion SHTC3 Relative Humidity / Temperature i2c sensor
+    - sx126x: Driver for Semtech sx126x radio modules
+    - xpt2046: XPT2046 Touch driver (#350)
+- **enhancements**
+    - **hd44780i2c** 
+        - clean up for go fmt
+        - Needed fixes and update hd44780i2c.go
+    - **ili9341, ili9342**
+        - add support for m5stack
+        - add support for m5stack-core2
+    - **wifi**
+        - modify to use shared net.Adapter interface for all supported wifi devices
+    - wifinina: remove busy wait
+- **bugfixes**
+    - **hd44780** 
+        - fix 4-bit data length flag
+        - Reset data pins to output mode after reading
+    - Nano 33 BLE drivers (#351)
+- **docs**
+    - examples/wifi: add unified example for tcpclient that compiles for all supported wifi adaptors
+
+0.18.0
+---
+- **new devices**
+    - apds9960: add support for APDS-9960 Digital Proximity sensor
+    - axp192: add support for AXP192 single Cell Li-Battery and power system management IC
+    - hts221: add support for HTS221 capacitive digital sensor for relative humidity and temperature
+    - i2csoft: add support for software I2C
+    - image: add support for image/jpeg and image/png
+    - lps22hb: add support for LPS22HB MEMS nano pressure sensor
+    - lsm6dox: add support for lsm6dox accelerometer
+    - lsm9ds1: add support for lsm9ds1 accelerometer
+- **enhancements**
+    - ili9341: change to use drivers.SPI interface
+    - **ws2812**
+        - generate assembly instead of handwriting it
+        - improve timings to be compatible with the WS2811
+        - add support for 168MHz (e.g. Adafruit Feather STM32F405)
+        - add support for RISC-V
+    - wifinina: control nina pins, for example leds
+- **docs**
+    - rtl8720dn: examples for tcpclient, udpstation, mqtt, and webserver
+    - **wifinina** 
+        - nina-fw update docs
+        - examples/wifinina/http-get
+    - ili9341: refactor examples
+    - Fix broken link for SHT3x datasheet
+- **core**
+    - all: use build directives for both Go1.17 and earlier versions
+- **bugfixes**
+    - net: fix raddr of tcp conn
+    - mcp3008: fix bitshift bug
+
 0.17.1
 ---
 - To correct an error in the release process. Same as 0.17.0.

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2018-2021 The TinyGo Authors. All rights reserved.
+Copyright (c) 2018-2022 The TinyGo Authors. All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are

Makefile

@@ -17,6 +17,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/apds9960/proximity/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/itsybitsy-m0/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/at24cx/main.go
@@ -51,6 +53,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/flash/console/qspi
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/gc9a01/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/i2c/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/uart/main.go
@@ -63,6 +67,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/hd44780i2c/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/hts221/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hub75/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/basic
@@ -79,6 +85,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis3dh/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=nano-33-ble ./examples/lps22hb/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/lsm303agr/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/lsm6ds3/main.go
@@ -95,12 +103,16 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/microbitmatrix/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit-v2 ./examples/microbitmatrix/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mma8653/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mpu6050/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=p1am-100 ./examples/p1am/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pico ./examples/pca9685/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setbuffer/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setpixel/main.go
@@ -111,6 +123,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht3x/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/shtc3/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/i2c_128x32/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/spi_128x64/main.go
@@ -133,6 +147,8 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl53l1x/main.go
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl6180x/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
@@ -149,6 +165,10 @@ smoke-test:
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/ws2812
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.bin -target=m5stamp-c3          ./examples/ws2812
+	@md5sum ./build/test.bin
+	tinygo build -size short -o ./build/test.hex -target=feather-nrf52840 ./examples/is31fl3731/main.go
+	@md5sum ./build/test.hex
 ifneq ($(AVR), 0)
 	tinygo build -size short -o ./build/test.hex -target=arduino   ./examples/ws2812
 	@md5sum ./build/test.hex
@@ -181,8 +201,8 @@ endif
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/dht/main.go
 	@md5sum ./build/test.hex
-	tinygo build -size short -o ./build/test.hex -target=arduino ./examples/keypad4x4/main.go
-	@md5sum ./build/test.hex
+	# tinygo build -size short -o ./build/test.hex -target=arduino ./examples/keypad4x4/main.go
+	# @md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/alarm/
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/clkout/
@@ -191,6 +211,8 @@ endif
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/timer/
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=pico ./examples/qmi8658c/main.go
+	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/ina260/main.go
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=nucleo-l432kc ./examples/aht20/main.go
@@ -205,15 +227,42 @@ endif
 	@md5sum ./build/test.hex
 	tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/mqttsub/
 	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/i2csoft/adt7410/
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.elf -target=wioterminal ./examples/axp192/m5stack-core2-blinky/
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/xpt2046/main.go
+	@md5sum ./build/test.uf2
+	tinygo build -size short -o ./build/test.elf -target=m5stack-core2 ./examples/ft6336/basic/
+	@md5sum ./build/test.elf
+	tinygo build -size short -o ./build/test.elf -target=m5stack-core2 ./examples/ft6336/touchpaint/
+	@md5sum ./build/test.elf
+	tinygo build -size short -o ./build/test.hex -target=nucleo-wl55jc ./examples/sx126x/lora_rxtx/
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/ssd1289/main.go
+	@md5sum ./build/test.uf2
+	tinygo build -size short -o ./build/test.hex -target=pico ./examples/irremote/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.hex -target=badger2040 ./examples/uc8151/main.go
+	@md5sum ./build/test.hex
+	tinygo build -size short -o ./build/test.uf2 -target=pico ./examples/scd4x/main.go
+	@md5sum ./build/test.uf2
+	tinygo build -size short -o ./build/test.uf2 -target=circuitplay-express ./examples/makeybutton/main.go
+	@md5sum ./build/test.uf2
+	tinygo build -size short -o ./build/test.hex -target=nucleo-wl55jc ./examples/lora/lorawan/atcmd/
+	@md5sum ./build/test.hex
 
-DRIVERS = $(wildcard */)
-NOTESTS = build examples flash semihosting pcd8544 shiftregister st7789 microphone mcp3008 gps microbitmatrix \
-		hcsr04 ssd1331 ws2812 thermistor apa102 easystepper ssd1351 ili9341 wifinina shifter hub75 \
-		hd44780 buzzer ssd1306 espat l9110x st7735 bmi160 l293x dht keypad4x4 max72xx p1am tone tm1637 \
-		pcf8563 mcp2515 servo sdcard rtl8720dn image cmd
-TESTS = $(filter-out $(addsuffix /%,$(NOTESTS)),$(DRIVERS))
+
+# rwildcard is a recursive version of $(wildcard) 
+# https://blog.jgc.org/2011/07/gnu-make-recursive-wildcard-function.html
+rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
+# Recursively find all *_test.go files from cwd & reduce to unique dir names
+HAS_TESTS = $(sort $(dir $(call rwildcard,,*_test.go)))
+# Exclude anything we explicitly don't want to test for whatever reason
+EXCLUDE_TESTS = image
+TESTS = $(filter-out $(addsuffix /%,$(EXCLUDE_TESTS)),$(HAS_TESTS))
 
 unit-test:
-	@go test -v $(addprefix ./,$(TESTS)) 
+	@go test -v $(addprefix ./,$(TESTS))
 
 test: clean fmt-check unit-test smoke-test

README.md

@@ -1,6 +1,6 @@
 # TinyGo Drivers
 
-[![PkgGoDev](https://pkg.go.dev/badge/tinygo.org/x/drivers)](https://pkg.go.dev/tinygo.org/x/drivers) [![CircleCI](https://circleci.com/gh/tinygo-org/drivers/tree/dev.svg?style=svg)](https://circleci.com/gh/tinygo-org/drivers/tree/dev)
+[![PkgGoDev](https://pkg.go.dev/badge/tinygo.org/x/drivers)](https://pkg.go.dev/tinygo.org/x/drivers) [![Build](https://github.com/tinygo-org/drivers/actions/workflows/build.yml/badge.svg?branch=dev)](https://github.com/tinygo-org/drivers/actions/workflows/build.yml)
 
 
 This package provides a collection of hardware drivers for devices such as sensors and displays that can be used together with [TinyGo](https://tinygo.org).
@@ -52,77 +52,101 @@ func main() {
 
 ## Currently supported devices
 
-The following 67 devices are supported.
+The following 90 devices are supported.
 
-| Device Name | Interface Type |
-|----------|-------------|
-| [ADT7410 I2C Temperature Sensor](https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf) | I2C |
-| [ADXL345 accelerometer](http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf) | I2C |
-| [AHT20 I2C Temperature and Humidity Sensor](http://www.aosong.com/userfiles/files/media/AHT20%20%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%B4%E6%98%8E%E4%B9%A6%20A0%2020201222.pdf) | I2C |
-| [AMG88xx 8x8 Thermal camera sensor](https://cdn-learn.adafruit.com/assets/assets/000/043/261/original/Grid-EYE_SPECIFICATIONS%28Reference%29.pdf) | I2C |
-| [APA102 RGB LED](https://cdn-shop.adafruit.com/product-files/2343/APA102C.pdf) | SPI |
-| [AT24CX 2-wire serial EEPROM](https://www.openimpulse.com/blog/wp-content/uploads/wpsc/downloadables/24C32-Datasheet.pdf) | I2C |
-| [BBC micro:bit LED matrix](https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf) | GPIO |
-| [BH1750 ambient light sensor](https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf) | I2C |
-| [BlinkM RGB LED](http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf) | I2C |
-| [BME280 humidity/pressure sensor](https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf) | I2C |
-| [BMI160 accelerometer/gyroscope](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi160-ds000.pdf) | SPI |
-| [BMP180 barometer](https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf) | I2C |
-| [BMP280 temperature/barometer](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf) | I2C |
-| [BMP388 pressure sensor](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf) | I2C |
-| [Buzzer](https://en.wikipedia.org/wiki/Buzzer#Piezoelectric) | GPIO |
-| [DHTXX thermometer and humidity sensor](https://cdn-shop.adafruit.com/datasheets/Digital+humidity+and+temperature+sensor+AM2302.pdf) | GPIO |
-| [DS1307 real time clock](https://datasheets.maximintegrated.com/en/ds/DS1307.pdf) | I2C |
-| [DS3231 real time clock](https://datasheets.maximintegrated.com/en/ds/DS3231.pdf) | I2C |
-| [ESP32 as WiFi Coprocessor with Arduino nina-fw](https://github.com/arduino/nina-fw) | SPI |
-| [ESP8266/ESP32 AT Command set for WiFi/TCP/UDP](https://github.com/espressif/esp32-at) | UART |
-| [GPS module](https://www.u-blox.com/en/product/neo-6-series) | I2C/UART |
-| [HC-SR04 Ultrasonic distance sensor](https://cdn.sparkfun.com/datasheets/Sensors/Proximity/HCSR04.pdf) | GPIO |
-| [HD44780 LCD controller](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf) | GPIO/I2C |
-| [HUB75 RGB led matrix](https://cdn-learn.adafruit.com/downloads/pdf/32x16-32x32-rgb-led-matrix.pdf) | SPI |
-| [ILI9341 TFT color display](https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf) | SPI |
-| [INA260 Volt/Amp/Power meter](https://www.ti.com/lit/ds/symlink/ina260.pdf) | I2C |
-| [4x4 Membrane Keypad](https://cdn.sparkfun.com/assets/f/f/a/5/0/DS-16038.pdf) | GPIO |
-| [L293x motor driver](https://www.ti.com/lit/ds/symlink/l293d.pdf) | GPIO/PWM |
-| [L9110x motor driver](https://www.elecrow.com/download/datasheet-l9110.pdf) | GPIO/PWM |
-| [LIS2MDL magnetometer](https://www.st.com/resource/en/datasheet/lis2mdl.pdf) | I2C |
-| [LIS3DH accelerometer](https://www.st.com/resource/en/datasheet/lis3dh.pdf) | I2C |
-| [LSM6DS3 accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3.pdf) | I2C |
-| [MAG3110 magnetometer](https://www.nxp.com/docs/en/data-sheet/MAG3110.pdf) | I2C |
-| [MAX7219 & MAX7221 display driver](https://datasheets.maximintegrated.com/en/ds/MAX7219-MAX7221.pdf) | SPI |
-| [MCP23017 port expander](https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf) | I2C |
-| [MCP3008 analog to digital converter (ADC)](http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf) | SPI |
-| [MCP2515 Stand-Alone CAN Controller with SPI Interface](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Family-Data-Sheet-DS20001801K.pdf) | SPI |
-| [Microphone - PDM](https://cdn-learn.adafruit.com/assets/assets/000/049/977/original/MP34DT01-M.pdf) | I2S/PDM |
-| [MMA8653 accelerometer](https://www.nxp.com/docs/en/data-sheet/MMA8653FC.pdf) | I2C |
-| [MPU6050 accelerometer/gyroscope](https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf) | I2C |
-| [P1AM-100 Base Controller](https://facts-engineering.github.io/modules/P1AM-100/P1AM-100.html) | SPI |
-| [PCD8544 display](http://eia.udg.edu/~forest/PCD8544_1.pdf) | SPI |
-| [PCF8563 real time clock](https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf) | I2C |
-| [Resistive Touchscreen (4-wire)](http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf) | GPIO |
-| [RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0](https://www.seeedstudio.com/Realtek8720DN-2-4G-5G-Dual-Bands-Wireless-and-BLE5-0-Combo-Module-p-4442.html) | UART |
-| [Semihosting](https://wiki.segger.com/Semihosting) | Debug |
-| [Servo](https://learn.sparkfun.com/tutorials/hobby-servo-tutorial/all) | PWM |
-| [Shift register (PISO)](https://en.wikipedia.org/wiki/Shift_register#Parallel-in_serial-out_\(PISO\)) | GPIO |
-| [Shift registers (SIPO)](https://en.wikipedia.org/wiki/Shift_register#Serial-in_parallel-out_(SIPO)) | GPIO |
-| [SHT3x Digital Humidity Sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf) | I2C |
-| [SPI NOR Flash Memory](https://en.wikipedia.org/wiki/Flash_memory#NOR_flash) | SPI/QSPI |
-| [SPI SDCARD/MMC](https://en.wikipedia.org/wiki/SD_card) | SPI |
-| [SSD1306 OLED display](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf) | I2C / SPI |
-| [SSD1331 TFT color display](https://www.crystalfontz.com/controllers/SolomonSystech/SSD1331/381/) | SPI |
-| [SSD1351 OLED display](https://download.mikroe.com/documents/datasheets/ssd1351-revision-1.3.pdf) | SPI |
-| [ST7735 TFT color display](https://www.crystalfontz.com/controllers/Sitronix/ST7735R/319/) | SPI |
-| [ST7789 TFT color display](https://cdn-shop.adafruit.com/product-files/3787/3787_tft_QT154H2201__________20190228182902.pdf) | SPI |
-| [Stepper motor "Easystepper" controller](https://en.wikipedia.org/wiki/Stepper_motor) | GPIO |
-| [Thermistor](https://www.farnell.com/datasheets/33552.pdf) | ADC |
-| [TM1637 7-segment LED display](https://www.mcielectronics.cl/website_MCI/static/documents/Datasheet_TM1637.pdf) | I2C |
-| [TMP102 I2C Temperature Sensor](https://download.mikroe.com/documents/datasheets/tmp102-data-sheet.pdf) | I2C |
-| [VEML6070 UV light sensor](https://www.vishay.com/docs/84277/veml6070.pdf) | I2C |
-| [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf) | I2C |
-| [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf) | SPI |
-| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf) | SPI |
-| [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf) | SPI |
-| [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf) | GPIO |
+| Device Name                                                                                                                                                                                         | Interface Type |
+|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------|
+| [ADT7410 I2C Temperature Sensor](https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf)                                                                                   | I2C |
+| [ADXL345 accelerometer](http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf)                                                                                             | I2C |
+| [AHT20 I2C Temperature and Humidity Sensor](http://www.aosong.com/userfiles/files/media/AHT20%20%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%B4%E6%98%8E%E4%B9%A6%20A0%2020201222.pdf)                         | I2C |
+| [AMG88xx 8x8 Thermal camera sensor](https://cdn-learn.adafruit.com/assets/assets/000/043/261/original/Grid-EYE_SPECIFICATIONS%28Reference%29.pdf)                                                   | I2C |
+| [APA102 RGB LED](https://cdn-shop.adafruit.com/product-files/2343/APA102C.pdf)                                                                                                                      | SPI |
+| [APDS9960 Digital proximity, ambient light, RGB and gesture sensor](https://cdn.sparkfun.com/assets/learn_tutorials/3/2/1/Avago-APDS-9960-datasheet.pdf)                                            | I2C |
+| [AT24CX 2-wire serial EEPROM](https://www.openimpulse.com/blog/wp-content/uploads/wpsc/downloadables/24C32-Datasheet.pdf)                                                                           | I2C |
+| [AXP192 single Cell Li-Battery and Power System Management](https://github.com/m5stack/M5-Schematic/blob/master/Core/AXP192%20Datasheet_v1.1_en_draft_2211.pdf)                                     | I2C |
+| [BBC micro:bit LED matrix](https://github.com/bbcmicrobit/hardware/blob/master/SCH_BBC-Microbit_V1.3B.pdf)                                                                                          | GPIO |
+| [BH1750 ambient light sensor](https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf)                                                                                                               | I2C |
+| [BlinkM RGB LED](http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf)                                                                                                                 | I2C |
+| [BME280 humidity/pressure sensor](https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf)                                                                                                 | I2C |
+| [BMI160 accelerometer/gyroscope](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi160-ds000.pdf)                                                                    | SPI |
+| [BMP180 barometer](https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf)                                                                                                                | I2C |
+| [BMP280 temperature/barometer](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf)                                                                      | I2C |
+| [BMP388 pressure sensor](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf)                                                                            | I2C |
+| [Buzzer](https://en.wikipedia.org/wiki/Buzzer#Piezoelectric)                                                                                                                                        | GPIO |
+| [DHTXX thermometer and humidity sensor](https://cdn-shop.adafruit.com/datasheets/Digital+humidity+and+temperature+sensor+AM2302.pdf)                                                                | GPIO |
+| [DS1307 real time clock](https://datasheets.maximintegrated.com/en/ds/DS1307.pdf)                                                                                                                   | I2C |
+| [DS3231 real time clock](https://datasheets.maximintegrated.com/en/ds/DS3231.pdf)                                                                                                                   | I2C |
+| [ESP32 as WiFi Coprocessor with Arduino nina-fw](https://github.com/arduino/nina-fw)                                                                                                                | SPI |
+| [ESP8266/ESP32 AT Command set for WiFi/TCP/UDP](https://github.com/espressif/esp32-at)                                                                                                              | UART |
+| [FT6336 touch controller](https://focuslcds.com/content/FT6236.pdf)                                                                                                                                 | I2C |
+| [GPS module](https://www.u-blox.com/en/product/neo-6-series)                                                                                                                                        | I2C/UART |
+| [HC-SR04 Ultrasonic distance sensor](https://cdn.sparkfun.com/datasheets/Sensors/Proximity/HCSR04.pdf)                                                                                              | GPIO |
+| [HD44780 LCD controller](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf)                                                                                                                       | GPIO/I2C |
+| [HTS221 digital humidity and temperature sensor](https://www.st.com/resource/en/datasheet/hts221.pdf)                                                                                               | I2C |
+| [HUB75 RGB led matrix](https://cdn-learn.adafruit.com/downloads/pdf/32x16-32x32-rgb-led-matrix.pdf)                                                                                                 | SPI |
+| [software I2C driver](https://www.ti.com/lit/an/slva704/slva704.pdf)                                                                                                                                | GPIO |
+| [ILI9341 TFT color display](https://cdn-shop.adafruit.com/datasheets/ILI9341.pdf)                                                                                                                   | SPI |
+| [INA260 Volt/Amp/Power meter](https://www.ti.com/lit/ds/symlink/ina260.pdf)                                                                                                                         | I2C |
+| [Infrared remote control](https://en.wikipedia.org/wiki/Consumer_IR)                                                                                                                                | GPIO |
+| [IS31FL3731 matrix LED driver](https://www.lumissil.com/assets/pdf/core/IS31FL3731_DS.pdf)                                                                                                          | I2C |
+| [4x4 Membrane Keypad](https://cdn.sparkfun.com/assets/f/f/a/5/0/DS-16038.pdf)                                                                                                                       | GPIO |
+| [L293x motor driver](https://www.ti.com/lit/ds/symlink/l293d.pdf)                                                                                                                                   | GPIO/PWM |
+| [L9110x motor driver](https://www.elecrow.com/download/datasheet-l9110.pdf)                                                                                                                         | GPIO/PWM |
+| [LIS2MDL magnetometer](https://www.st.com/resource/en/datasheet/lis2mdl.pdf)                                                                                                                        | I2C |
+| [LIS3DH accelerometer](https://www.st.com/resource/en/datasheet/lis3dh.pdf)                                                                                                                         | I2C |
+| [LPS22HB MEMS nano pressure sensor](https://www.st.com/resource/en/datasheet/dm00140895.pdf)                                                                                                        | I2C |
+| [LSM6DS3 accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3.pdf)                                                                                                                       | I2C |
+| [LSM6DSOX accelerometer](https://www.st.com/resource/en/datasheet/lsm6dsox.pdf)                                                                                                                     | I2C |
+| [LSM6DS3TR accelerometer](https://www.st.com/resource/en/datasheet/lsm6ds3tr.pdf)                                                                                                                   | I2C |
+| [LSM303AGR accelerometer](https://www.st.com/resource/en/datasheet/lsm303agr.pdf)                                                                                                                   | I2C |
+| [LSM9DS1 accelerometer](https://www.st.com/resource/en/datasheet/lsm9ds1.pdf)                                                                                                                       | I2C |
+| [Makey Button](https://makeymakey.com/)                                                                                                                                                             | GPIO |
+| [MAG3110 magnetometer](https://www.nxp.com/docs/en/data-sheet/MAG3110.pdf)                                                                                                                          | I2C |
+| [MAX7219 & MAX7221 display driver](https://datasheets.maximintegrated.com/en/ds/MAX7219-MAX7221.pdf)                                                                                                | SPI |
+| [MCP2515 Stand-Alone CAN Controller with SPI Interface](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515-Family-Data-Sheet-DS20001801K.pdf)                                                 | SPI |
+| [MCP3008 analog to digital converter (ADC)](http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf)                                                                                             | SPI |
+| [MCP23017 port expander](https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf)                                                                                                            | I2C |
+| [Microphone - PDM](https://cdn-learn.adafruit.com/assets/assets/000/049/977/original/MP34DT01-M.pdf)                                                                                                | I2S/PDM |
+| [MMA8653 accelerometer](https://www.nxp.com/docs/en/data-sheet/MMA8653FC.pdf)                                                                                                                       | I2C |
+| [MPU6050 accelerometer/gyroscope](https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf)                                                                                 | I2C |
+| [P1AM-100 Base Controller](https://facts-engineering.github.io/modules/P1AM-100/P1AM-100.html)                                                                                                      | SPI |
+| [PCD8544 display](http://eia.udg.edu/~forest/PCD8544_1.pdf)                                                                                                                                         | SPI |
+| [PCF8563 real time clock](https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf)                                                                                                                       | I2C |
+| [QMI8658C accelerometer/gyroscope](https://www.qstcorp.com/upload/pdf/202202/%EF%BC%88%E5%B7%B2%E4%BC%A0%EF%BC%89QMI8658C%20datasheet%20rev%200.9.pdf)                                              | I2C |
+| [Resistive Touchscreen (4-wire)](http://ww1.microchip.com/downloads/en/Appnotes/doc8091.pdf)                                                                                                        | GPIO |
+| [RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0](https://www.seeedstudio.com/Realtek8720DN-2-4G-5G-Dual-Bands-Wireless-and-BLE5-0-Combo-Module-p-4442.html)                                       | UART |
+| [SCD4x CO2 Sensor](https://sensirion.com/media/documents/C4B87CE6/627C2DCD/CD_DS_SCD40_SCD41_Datasheet_D1.pdf)                                                                                      | I2C |
+| [Semihosting](https://wiki.segger.com/Semihosting)                                                                                                                                                  | Debug |
+| [Servo](https://learn.sparkfun.com/tutorials/hobby-servo-tutorial/all)                                                                                                                              | PWM |
+| [Shift register (PISO)](https://en.wikipedia.org/wiki/Shift_register#Parallel-in_serial-out_\(PISO\))                                                                                               | GPIO |
+| [Shift registers (SIPO)](https://en.wikipedia.org/wiki/Shift_register#Serial-in_parallel-out_(SIPO))                                                                                                | GPIO |
+| [SH1106 OLED display](https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf) | I2C / SPI |
+| [SHT3x Digital Humidity Sensor](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf) | I2C |
+| [SHTC3 Digital Humidity Sensor (RH/T)](https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf)  | I2C |
+| [SPI NOR Flash Memory](https://en.wikipedia.org/wiki/Flash_memory#NOR_flash)                                                                                                                        | SPI/QSPI |
+| [SPI SDCARD/MMC](https://en.wikipedia.org/wiki/SD_card)                                                                                                                                             | SPI |
+| [SSD1306 OLED display](https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf)                                                                                                                        | I2C / SPI |
+| [SSD1331 TFT color display](https://www.crystalfontz.com/controllers/SolomonSystech/SSD1331/381/)                                                                                                   | SPI |
+| [SSD1351 OLED display](https://download.mikroe.com/documents/datasheets/ssd1351-revision-1.3.pdf)                                                                                                   | SPI |
+| [ST7735 TFT color display](https://www.crystalfontz.com/controllers/Sitronix/ST7735R/319/)                                                                                                          | SPI |
+| [ST7789 TFT color display](https://cdn-shop.adafruit.com/product-files/3787/3787_tft_QT154H2201__________20190228182902.pdf)                                                                        | SPI |
+| [Stepper motor "Easystepper" controller](https://en.wikipedia.org/wiki/Stepper_motor)                                                                                                               | GPIO |
+| [Thermistor](https://www.farnell.com/datasheets/33552.pdf)                                                                                                                                          | ADC |
+| [TM1637 7-segment LED display](https://www.mcielectronics.cl/website_MCI/static/documents/Datasheet_TM1637.pdf)                                                                                     | I2C |
+| [TMP102 I2C Temperature Sensor](https://download.mikroe.com/documents/datasheets/tmp102-data-sheet.pdf)                                                                                             | I2C |
+| [UC8151 All-in-one driver IC for ESL](https://www.buydisplay.com/download/ic/UC8151C.pdf)                                                                                                           | I2C |
+| [VEML6070 UV light sensor](https://www.vishay.com/docs/84277/veml6070.pdf)                                                                                                                          | I2C |
+| [VL53L1X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl53l1x.pdf)                                                                                                      | I2C |
+| [VL6180X time-of-flight distance sensor](https://www.st.com/resource/en/datasheet/vl6180x.pdf)                                                                                                      | I2C |
+| [Waveshare 2.13" (B & C) e-paper display](https://www.waveshare.com/w/upload/d/d3/2.13inch-e-paper-b-Specification.pdf)                                                                             | SPI |
+| [Waveshare 2.13" e-paper display](https://www.waveshare.com/w/upload/e/e6/2.13inch_e-Paper_Datasheet.pdf)                                                                                           | SPI |
+| [Waveshare 2.9" e-paper display (V1)](https://www.waveshare.com/w/upload/e/e6/2.9inch_e-Paper_Datasheet.pdf)                                                                                        | SPI |
+| [Waveshare 4.2" e-paper B/W display](https://www.waveshare.com/w/upload/6/6a/4.2inch-e-paper-specification.pdf)                                                                                     | SPI |
+| [Waveshare GC9A01 TFT round display](https://www.waveshare.com/w/upload/5/5e/GC9A01A.pdf)                                                                                                           | SPI |
+| [WS2812 RGB LED](https://cdn-shop.adafruit.com/datasheets/WS2812.pdf)                                                                                                                               | GPIO |
+| [XPT2046 touch controller](http://grobotronics.com/images/datasheets/xpt2046-datasheet.pdf)                                                                                                         | GPIO |
+| [Semtech SX126x Lora](https://www.semtech.com/products/wireless-rf/lora-connect/sx1261)                                                                                                             | SPI |
+| [SSD1289 TFT color display](http://aitendo3.sakura.ne.jp/aitendo_data/product_img/lcd/tft2/M032C1289TP/3.2-SSD1289.pdf)                                                                             | GPIO |
 
 ## Contributing
 

adt7410/adt7410.go

@@ -1,7 +1,6 @@
 // Package adt7410 provides a driver for the adt7410 I2C Temperature Sensor.
 //
 // Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADT7410.pdf
-//
 package adt7410 // import "tinygo.org/x/drivers/adt7410"
 
 import (

adxl345/adxl345.go

@@ -3,7 +3,6 @@
 // Datasheet EN: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
 //
 // Datasheet JP: http://www.analog.com/media/jp/technical-documentation/data-sheets/ADXL345_jp.pdf
-//
 package adxl345 // import "tinygo.org/x/drivers/adxl345"
 
 import "tinygo.org/x/drivers"

apds9960/apds9960.go

@@ -0,0 +1,467 @@
+// Package apds9960 implements a driver for APDS-9960,
+// a digital proximity, ambient light, RGB and gesture sensor.
+//
+// Datasheet: https://cdn.sparkfun.com/assets/learn_tutorials/3/2/1/Avago-APDS-9960-datasheet.pdf
+package apds9960
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+// Device wraps an I2C connection to a APDS-9960 device.
+type Device struct {
+	bus     drivers.I2C
+	Address uint8
+	mode    uint8
+	gesture gestureData
+}
+
+// Configuration for APDS-9960 device.
+type Configuration struct {
+	ProximityPulseLength uint8
+	ProximityPulseCount  uint8
+	GesturePulseLength   uint8
+	GesturePulseCount    uint8
+	ProximityGain        uint8
+	GestureGain          uint8
+	ColorGain            uint8
+	ADCIntegrationCycles uint16
+	LEDBoost             uint16
+	threshold            uint8
+	sensitivity          uint8
+}
+
+// for gesture-related data
+type gestureData struct {
+	detected    uint8
+	threshold   uint8
+	sensitivity uint8
+	gXDelta     int16
+	gYDelta     int16
+	gXPrevDelta int16
+	gYPrevDelta int16
+	received    bool
+}
+
+// for enabling various device function
+type enableConfig struct {
+	GEN  bool
+	PIEN bool
+	AIEN bool
+	WEN  bool
+	PEN  bool
+	AEN  bool
+	PON  bool
+}
+
+// New creates a new APDS-9960 connection. The I2C bus must already be
+// configured.
+//
+// This function only creates the Device object, it does not touch the device.
+func New(bus drivers.I2C) Device {
+	return Device{bus: bus, Address: ADPS9960_ADDRESS, mode: MODE_NONE}
+}
+
+// Connected returns whether APDS-9960 has been found.
+// It does a "who am I" request and checks the response.
+func (d *Device) Connected() bool {
+	data := []byte{0}
+	d.bus.ReadRegister(d.Address, APDS9960_ID_REG, data)
+	return data[0] == 0xAB
+}
+
+// GetMode returns current engine mode
+func (d *Device) GetMode() uint8 {
+	return d.mode
+}
+
+// DisableAll turns off the device and all functions
+func (d *Device) DisableAll() {
+	d.enable(enableConfig{})
+	d.bus.WriteRegister(d.Address, APDS9960_GCONF4_REG, []byte{0x00})
+	d.mode = MODE_NONE
+	d.gesture.detected = GESTURE_NONE
+}
+
+// SetProximityPulse sets proximity pulse length (4, 8, 16, 32) and count (1~64)
+// default: 16, 64
+func (d *Device) SetProximityPulse(length, count uint8) {
+	d.bus.WriteRegister(d.Address, APDS9960_PPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
+}
+
+// SetGesturePulse sets gesture pulse length (4, 8, 16, 32) and count (1~64)
+// default: 16, 64
+func (d *Device) SetGesturePulse(length, count uint8) {
+	d.bus.WriteRegister(d.Address, APDS9960_GPULSE_REG, []byte{getPulseLength(length)<<6 | getPulseCount(count)})
+}
+
+// SetADCIntegrationCycles sets ALS/color ADC internal integration cycles (1~256, 1 cycle = 2.78 ms)
+// default: 4 (~10 ms)
+func (d *Device) SetADCIntegrationCycles(cycles uint16) {
+	if cycles > 256 {
+		cycles = 256
+	}
+	d.bus.WriteRegister(d.Address, APDS9960_ATIME_REG, []byte{uint8(256 - cycles)})
+}
+
+// SetGains sets proximity/gesture gain (1, 2, 4, 8x) and ALS/color gain (1, 4, 16, 64x)
+// default: 1, 1, 4
+func (d *Device) SetGains(proximityGain, gestureGain, colorGain uint8) {
+	d.bus.WriteRegister(d.Address, APDS9960_CONTROL_REG, []byte{getProximityGain(proximityGain)<<2 | getALSGain(colorGain)})
+	d.bus.WriteRegister(d.Address, APDS9960_GCONF2_REG, []byte{getProximityGain(gestureGain) << 5})
+}
+
+// LEDBoost sets proximity and gesture LED current level (100, 150, 200, 300 (%))
+// default: 100
+func (d *Device) LEDBoost(percent uint16) {
+	var v uint8
+	switch percent {
+	case 100:
+		v = 0
+	case 150:
+		v = 1
+	case 200:
+		v = 2
+	case 300:
+		v = 3
+	}
+	d.bus.WriteRegister(d.Address, APDS9960_CONFIG2_REG, []byte{0x01 | v<<4})
+}
+
+// Setthreshold sets threshold (0~255) for detecting gestures
+// default: 30
+func (d *Device) Setthreshold(t uint8) {
+	d.gesture.threshold = t
+}
+
+// Setsensitivity sets sensivity (0~100) for detecting gestures
+// default: 20
+func (d *Device) Setsensitivity(s uint8) {
+	if s > 100 {
+		s = 100
+	}
+	d.gesture.sensitivity = 100 - s
+}
+
+// EnableProximity starts the proximity engine
+func (d *Device) EnableProximity() {
+	if d.mode != MODE_NONE {
+		d.DisableAll()
+	}
+	d.enable(enableConfig{PON: true, PEN: true, WEN: true})
+	d.mode = MODE_PROXIMITY
+}
+
+// ProximityAvailable reports if proximity data is available
+func (d *Device) ProximityAvailable() bool {
+	if d.mode == MODE_PROXIMITY && d.readStatus("PVALID") {
+		return true
+	}
+	return false
+}
+
+// ReadProximity reads proximity data (0~255)
+func (d *Device) ReadProximity() (proximity int32) {
+	if d.mode != MODE_PROXIMITY {
+		return 0
+	}
+	data := []byte{0}
+	d.bus.ReadRegister(d.Address, APDS9960_PDATA_REG, data)
+	return 255 - int32(data[0])
+}
+
+// EnableColor starts the color engine
+func (d *Device) EnableColor() {
+	if d.mode != MODE_NONE {
+		d.DisableAll()
+	}
+	d.enable(enableConfig{PON: true, AEN: true, WEN: true})
+	d.mode = MODE_COLOR
+}
+
+// ColorAvailable reports if color data is available
+func (d *Device) ColorAvailable() bool {
+	if d.mode == MODE_COLOR && d.readStatus("AVALID") {
+		return true
+	}
+	return false
+}
+
+// ReadColor reads color data (red, green, blue, clear color/brightness)
+func (d *Device) ReadColor() (r int32, g int32, b int32, clear int32) {
+	if d.mode != MODE_COLOR {
+		return
+	}
+	data := []byte{0, 0, 0, 0, 0, 0, 0, 0}
+	d.bus.ReadRegister(d.Address, APDS9960_CDATAL_REG, data[:1])
+	d.bus.ReadRegister(d.Address, APDS9960_CDATAH_REG, data[1:2])
+	d.bus.ReadRegister(d.Address, APDS9960_RDATAL_REG, data[2:3])
+	d.bus.ReadRegister(d.Address, APDS9960_RDATAH_REG, data[3:4])
+	d.bus.ReadRegister(d.Address, APDS9960_GDATAL_REG, data[4:5])
+	d.bus.ReadRegister(d.Address, APDS9960_GDATAH_REG, data[5:6])
+	d.bus.ReadRegister(d.Address, APDS9960_BDATAL_REG, data[6:7])
+	d.bus.ReadRegister(d.Address, APDS9960_BDATAH_REG, data[7:])
+	clear = int32(uint16(data[1])<<8 | uint16(data[0]))
+	r = int32(uint16(data[3])<<8 | uint16(data[2]))
+	g = int32(uint16(data[5])<<8 | uint16(data[4]))
+	b = int32(uint16(data[7])<<8 | uint16(data[6]))
+	return
+}
+
+// EnableGesture starts the gesture engine
+func (d *Device) EnableGesture() {
+	if d.mode != MODE_NONE {
+		d.DisableAll()
+	}
+	d.enable(enableConfig{PON: true, PEN: true, GEN: true, WEN: true})
+	d.mode = MODE_GESTURE
+	d.gesture.detected = GESTURE_NONE
+	d.gesture.gXDelta = 0
+	d.gesture.gYDelta = 0
+	d.gesture.gXPrevDelta = 0
+	d.gesture.gYPrevDelta = 0
+	d.gesture.received = false
+}
+
+// GestureAvailable reports if gesture data is available
+func (d *Device) GestureAvailable() bool {
+	if d.mode != MODE_GESTURE {
+		return false
+	}
+
+	data := []byte{0, 0, 0, 0}
+
+	// check GVALID
+	d.bus.ReadRegister(d.Address, APDS9960_GSTATUS_REG, data[:1])
+	if data[0]&0x01 == 0 {
+		return false
+	}
+
+	// get number of data sets available in FIFO
+	d.bus.ReadRegister(d.Address, APDS9960_GFLVL_REG, data[:1])
+	availableDataSets := data[0]
+	if availableDataSets == 0 {
+		return false
+	}
+
+	// read up, down, left and right proximity data from FIFO
+	var dataSets [32][4]uint8
+	for i := uint8(0); i < availableDataSets; i++ {
+		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_U_REG, data[:1])
+		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_D_REG, data[1:2])
+		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_L_REG, data[2:3])
+		d.bus.ReadRegister(d.Address, APDS9960_GFIFO_R_REG, data[3:4])
+		for j := uint8(0); j < 4; j++ {
+			dataSets[i][j] = data[j]
+		}
+	}
+
+	// gesture detection process
+	d.gesture.detected = GESTURE_NONE
+	for i := uint8(0); i < availableDataSets; i++ {
+		U := dataSets[i][0]
+		D := dataSets[i][1]
+		L := dataSets[i][2]
+		R := dataSets[i][3]
+
+		// if all readings fall below threshold, it's possible that
+		// a movement's just been made
+		if U < d.gesture.threshold && D < d.gesture.threshold && L < d.gesture.threshold && R < d.gesture.threshold {
+			d.gesture.received = true
+			// if there were movement in the previous step (including the last data sets)
+			if d.gesture.gXPrevDelta != 0 && d.gesture.gYPrevDelta != 0 {
+				totalX := d.gesture.gXPrevDelta - d.gesture.gXDelta
+				totalY := d.gesture.gYPrevDelta - d.gesture.gYDelta
+				// if previous and current movement are in opposite directions (pass through one led then next)
+				// and the difference is big enough, the gesture is recorded
+				switch {
+				case totalX < -int16(d.gesture.sensitivity):
+					d.gesture.detected = GESTURE_LEFT
+				case totalX > int16(d.gesture.sensitivity):
+					d.gesture.detected = GESTURE_RIGHT
+				case totalY > int16(d.gesture.sensitivity):
+					d.gesture.detected = GESTURE_DOWN
+				case totalY < -int16(d.gesture.sensitivity):
+					d.gesture.detected = GESTURE_UP
+				}
+				d.gesture.gXDelta = 0
+				d.gesture.gYDelta = 0
+				d.gesture.gXPrevDelta = 0
+				d.gesture.gYPrevDelta = 0
+			}
+			continue
+		}
+
+		// recording current movement
+		d.gesture.gXDelta = int16(R) - int16(L)
+		d.gesture.gYDelta = int16(D) - int16(U)
+		if d.gesture.received {
+			d.gesture.received = false
+			d.gesture.gXPrevDelta = d.gesture.gXDelta
+			d.gesture.gYPrevDelta = d.gesture.gYDelta
+		}
+	}
+
+	return d.gesture.detected != GESTURE_NONE
+}
+
+// ReadGesture reads last gesture data
+func (d *Device) ReadGesture() (gesture int32) {
+	return int32(d.gesture.detected)
+}
+
+// private functions
+
+func (d *Device) configureDevice(cfg Configuration) {
+	d.DisableAll() // turn off everything
+
+	// "default" settings
+	if cfg.ProximityPulseLength == 0 {
+		cfg.ProximityPulseLength = 16
+	}
+	if cfg.ProximityPulseCount == 0 {
+		cfg.ProximityPulseCount = 64
+	}
+	if cfg.GesturePulseLength == 0 {
+		cfg.GesturePulseLength = 16
+	}
+	if cfg.GesturePulseCount == 0 {
+		cfg.GesturePulseCount = 64
+	}
+	if cfg.ProximityGain == 0 {
+		cfg.ProximityGain = 1
+	}
+	if cfg.GestureGain == 0 {
+		cfg.GestureGain = 1
+	}
+	if cfg.ColorGain == 0 {
+		cfg.ColorGain = 4
+	}
+	if cfg.ADCIntegrationCycles == 0 {
+		cfg.ADCIntegrationCycles = 4
+	}
+	if cfg.threshold == 0 {
+		d.gesture.threshold = 30
+	}
+	if cfg.sensitivity == 0 {
+		d.gesture.sensitivity = 20
+	}
+
+	d.SetProximityPulse(cfg.ProximityPulseLength, cfg.ProximityPulseCount)
+	d.SetGesturePulse(cfg.GesturePulseLength, cfg.GesturePulseCount)
+	d.SetGains(cfg.ProximityGain, cfg.GestureGain, cfg.ColorGain)
+	d.SetADCIntegrationCycles(cfg.ADCIntegrationCycles)
+
+	if cfg.LEDBoost > 0 {
+		d.LEDBoost(cfg.LEDBoost)
+	}
+}
+
+func (d *Device) enable(cfg enableConfig) {
+	var gen, pien, aien, wen, pen, aen, pon uint8
+
+	if cfg.GEN {
+		gen = 1
+	}
+	if cfg.PIEN {
+		pien = 1
+	}
+	if cfg.AIEN {
+		aien = 1
+	}
+	if cfg.WEN {
+		wen = 1
+	}
+	if cfg.PEN {
+		pen = 1
+	}
+	if cfg.AEN {
+		aen = 1
+	}
+	if cfg.PON {
+		pon = 1
+	}
+
+	data := []byte{gen<<6 | pien<<5 | aien<<4 | wen<<3 | pen<<2 | aen<<1 | pon}
+	d.bus.WriteRegister(d.Address, APDS9960_ENABLE_REG, data)
+
+	if cfg.PON {
+		time.Sleep(time.Millisecond * 10)
+	}
+}
+
+func (d *Device) readStatus(param string) bool {
+	data := []byte{0}
+	d.bus.ReadRegister(d.Address, APDS9960_STATUS_REG, data)
+
+	switch param {
+	case "CPSAT":
+		return data[0]>>7&0x01 == 1
+	case "PGSAT":
+		return data[0]>>6&0x01 == 1
+	case "PINT":
+		return data[0]>>5&0x01 == 1
+	case "AINT":
+		return data[0]>>4&0x01 == 1
+	case "PVALID":
+		return data[0]>>1&0x01 == 1
+	case "AVALID":
+		return data[0]&0x01 == 1
+	default:
+		return false
+	}
+}
+
+func getPulseLength(l uint8) uint8 {
+	switch l {
+	case 4:
+		return 0
+	case 8:
+		return 1
+	case 16:
+		return 2
+	case 32:
+		return 3
+	default:
+		return 0
+	}
+}
+
+func getPulseCount(c uint8) uint8 {
+	if c < 1 && c > 64 {
+		return 0
+	}
+	return c - 1
+}
+
+func getProximityGain(g uint8) uint8 {
+	switch g {
+	case 1:
+		return 0
+	case 2:
+		return 1
+	case 4:
+		return 2
+	case 8:
+		return 3
+	default:
+		return 0
+	}
+}
+
+func getALSGain(g uint8) uint8 {
+	switch g {
+	case 1:
+		return 0
+	case 4:
+		return 1
+	case 16:
+		return 2
+	case 64:
+		return 3
+	default:
+		return 0
+	}
+}

apds9960/apds9960_generic.go

@@ -0,0 +1,9 @@
+//go:build !nano_33_ble
+
+package apds9960
+
+// Configure sets up the APDS-9960 device.
+func (d *Device) Configure(cfg Configuration) {
+	// configure device
+	d.configureDevice(cfg)
+}

apds9960/apds9960_nano_33_ble.go

@@ -0,0 +1,23 @@
+//go:build nano_33_ble
+
+package apds9960
+
+import (
+	"machine"
+	"time"
+)
+
+// Configure sets up the APDS-9960 device.
+func (d *Device) Configure(cfg Configuration) {
+
+	// Following lines are Nano 33 BLE specific, they have nothing to do with sensor per se
+	machine.LSM_PWR.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.LSM_PWR.High()
+	machine.I2C_PULLUP.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.I2C_PULLUP.High()
+	// Wait a moment
+	time.Sleep(10 * time.Millisecond)
+
+	// configure device
+	d.configureDevice(cfg)
+}

apds9960/registers.go

@@ -0,0 +1,78 @@
+package apds9960
+
+const (
+
+	// I2C address
+	ADPS9960_ADDRESS = 0x39
+
+	// control/status registers
+	APDS9960_RAM_REG        = 0x00
+	APDS9960_ENABLE_REG     = 0x80
+	APDS9960_ATIME_REG      = 0x81
+	APDS9960_WTIME_REG      = 0x83
+	APDS9960_AILTIL_REG     = 0x84
+	APDS9960_AILTH_REG      = 0x85
+	APDS9960_AIHTL_REG      = 0x86
+	APDS9960_AIHTH_REG      = 0x87
+	APDS9960_PILT_REG       = 0x89
+	APDS9960_PIHT_REG       = 0x8B
+	APDS9960_PERS_REG       = 0x8C
+	APDS9960_CONFIG1_REG    = 0x8D
+	APDS9960_PPULSE_REG     = 0x8E
+	APDS9960_CONTROL_REG    = 0x8F
+	APDS9960_CONFIG2_REG    = 0x90
+	APDS9960_ID_REG         = 0x92
+	APDS9960_STATUS_REG     = 0x93
+	APDS9960_CDATAL_REG     = 0x94
+	APDS9960_CDATAH_REG     = 0x95
+	APDS9960_RDATAL_REG     = 0x96
+	APDS9960_RDATAH_REG     = 0x97
+	APDS9960_GDATAL_REG     = 0x98
+	APDS9960_GDATAH_REG     = 0x99
+	APDS9960_BDATAL_REG     = 0x9A
+	APDS9960_BDATAH_REG     = 0x9B
+	APDS9960_PDATA_REG      = 0x9C
+	APDS9960_POFFSET_UR_REG = 0x9D
+	APDS9960_POFFSET_DL_REG = 0x9E
+	APDS9960_CONFIG3_REG    = 0x9F
+	APDS9960_GPENTH_REG     = 0xA0
+	APDS9960_GEXTH_REG      = 0xA1
+	APDS9960_GCONF1_REG     = 0xA2
+	APDS9960_GCONF2_REG     = 0xA3
+	APDS9960_GOFFSET_U_REG  = 0xA4
+	APDS9960_GOFFSET_D_REG  = 0xA5
+	APDS9960_GOFFSET_L_REG  = 0xA7
+	APDS9960_GOFFSET_R_REG  = 0xA9
+	APDS9960_GPULSE_REG     = 0xA6
+	APDS9960_GCONF3_REG     = 0xAA
+	APDS9960_GCONF4_REG     = 0xAB
+	APDS9960_GFLVL_REG      = 0xAE
+	APDS9960_GSTATUS_REG    = 0xAF
+	APDS9960_IFORCE_REG     = 0xE4
+	APDS9960_PICLEAR_REG    = 0xE5
+	APDS9960_CICLEAR_REG    = 0xE6
+	APDS9960_AICLEAR_REG    = 0xE7
+	APDS9960_GFIFO_U_REG    = 0xFC
+	APDS9960_GFIFO_D_REG    = 0xFD
+	APDS9960_GFIFO_L_REG    = 0xFE
+	APDS9960_GFIFO_R_REG    = 0xFF
+)
+
+const (
+
+	// sensor modes
+	MODE_NONE = iota
+	MODE_PROXIMITY
+	MODE_COLOR
+	MODE_GESTURE
+)
+
+const (
+
+	// detected gestures
+	GESTURE_NONE = iota
+	GESTURE_UP
+	GESTURE_DOWN
+	GESTURE_LEFT
+	GESTURE_RIGHT
+)

axp192/axp192.go

@@ -0,0 +1,257 @@
+// Package axp192 provides a driver for the axp192 I2C Enhanced single Cell
+// Li-Battery and Power System Management IC.
+//
+// http://www.x-powers.com/en.php/Info/product_detail/article_id/29
+// Datasheet: https://github.com/m5stack/M5-Schematic/blob/master/Core/AXP192%20Datasheet_v1.1_en_draft_2211.pdf
+package axp192 // import "tinygo.org/x/drivers/axp192"
+
+import (
+	"tinygo.org/x/drivers"
+)
+
+type Error uint8
+
+const (
+	ErrInvalidID Error = 0x1
+)
+
+func (e Error) Error() string {
+	switch e {
+	case ErrInvalidID:
+		return "Invalid chip ID"
+	default:
+		return "Unknown error"
+	}
+}
+
+type Device struct {
+	bus     drivers.I2C
+	buf     []byte
+	Address uint8
+}
+
+// New returns AXP192 device for the provided I2C bus using default address.
+func New(i2c drivers.I2C) *Device {
+	return &Device{
+		bus:     i2c,
+		buf:     make([]byte, 2),
+		Address: Address,
+	}
+}
+
+type Config struct {
+}
+
+// Configure the AXP192 device.
+func (d *Device) Configure(config Config) error {
+	return nil
+}
+
+// ReadPowerSupplyStatus reads power supply status.
+func (d *Device) ReadPowerSupplyStatus() uint8 {
+	return d.read8bit(RegPowerSupplyStatus)
+}
+
+// SetVbusIPSOutAccessManagement sets VBUS-IPSOUT access management.
+func (d *Device) SetVbusIPSOutAccessManagement(a uint8) {
+	d.write1Byte(RegVbusIPSOutAccessManagement, a)
+}
+
+// GetVbusIPSOutAccessManagement gets VBUS-IPSOUT access management.
+func (d *Device) GetVbusIPSOutAccessManagement() uint8 {
+	return d.read8bit(RegVbusIPSOutAccessManagement)
+}
+
+// SetGPIO1Control sets GPIO1 function.
+func (d *Device) SetGPIO1Control(a uint8) {
+	d.write1Byte(RegGPIO1Control, a)
+}
+
+// GetGPIO1Control gets GPIO1 function.
+func (d *Device) GetGPIO1Control() uint8 {
+	return d.read8bit(RegGPIO1Control)
+}
+
+// SetGPIO2Control sets GPIO2 function.
+func (d *Device) SetGPIO2Control(a uint8) {
+	d.write1Byte(RegGPIO2Control, a)
+}
+
+// GetGPIO2Control gets GPIO2 function.
+func (d *Device) GetGPIO2Control() uint8 {
+	return d.read8bit(RegGPIO2Control)
+}
+
+// SetGPIO20SignalStatus sets GPIO[2:0] signal status.
+func (d *Device) SetGPIO20SignalStatus(a uint8) {
+	d.write1Byte(RegGPIO20SignalStatus, a)
+}
+
+// GetGPIO20SignalStatus gets GPIO[2:0] signal status.
+func (d *Device) GetGPIO20SignalStatus() uint8 {
+	return d.read8bit(RegGPIO20SignalStatus)
+}
+
+// SetBackupBatteryChargingControl sets backup battery charge control.
+func (d *Device) SetBackupBatteryChargingControl(a uint8) {
+	d.write1Byte(RegBackupBatteryChargingControl, a)
+}
+
+// GetBackupBatteryChargingControl gets backup battery charge control.
+func (d *Device) GetBackupBatteryChargingControl() uint8 {
+	return d.read8bit(RegBackupBatteryChargingControl)
+}
+
+// SetDCDC1VoltageSet sets DC-DC1 output voltage.
+func (d *Device) SetDCDC1VoltageSet(a uint8) {
+	d.write1Byte(RegDCDC1VoltageSet, a)
+}
+
+// GetDCDC1VoltageSet gets DC-DC1 output voltage.
+func (d *Device) GetDCDC1VoltageSet() uint8 {
+	return d.read8bit(RegDCDC1VoltageSet)
+}
+
+// SetDCDC2VoltageSet sets DC-DC2 dynamic voltage parameter.
+func (d *Device) SetDCDC2VoltageSet(a uint8) {
+	d.write1Byte(RegDCDC2VoltageSet, a)
+}
+
+// GetDCDC2VoltageSet gets DC-DC2 dynamic voltage parameter.
+func (d *Device) GetDCDC2VoltageSet() uint8 {
+	return d.read8bit(RegDCDC2VoltageSet)
+}
+
+// SetDCDC3VoltageSet sets DC-DC3 output voltage.
+func (d *Device) SetDCDC3VoltageSet(a uint8) {
+	d.write1Byte(RegDCDC3VoltageSet, a)
+}
+
+// GetDCDC3VoltageSet gets DC-DC3 output voltage.
+func (d *Device) GetDCDC3VoltageSet() uint8 {
+	return d.read8bit(RegDCDC3VoltageSet)
+}
+
+// SetLDO23VoltageSet sets LDO2/3 output voltage.
+func (d *Device) SetLDO23VoltageSet(a uint8) {
+	d.write1Byte(RegLDO23VoltageSet, a)
+}
+
+// GetLDO23VoltageSet gets LDO2/3 output voltage.
+func (d *Device) GetLDO23VoltageSet() uint8 {
+	return d.read8bit(RegLDO23VoltageSet)
+}
+
+// SetDCDC13LDO23Switch sets DC-DC1/3 & LOD2/3 output control.
+func (d *Device) SetDCDC13LDO23Switch(a uint8) {
+	d.write1Byte(RegDCDC13LDO23Switch, a)
+}
+
+// GetDCDC13LDO23Switch gets DC-DC1/3 & LOD2/3 output control.
+func (d *Device) GetDCDC13LDO23Switch() uint8 {
+	return d.read8bit(RegDCDC13LDO23Switch)
+}
+
+// SetGPIO43FunctionControl sets GPIO[4:3] pin function.
+func (d *Device) SetGPIO43FunctionControl(a uint8) {
+	d.write1Byte(RegGPIO43FunctionControl, a)
+}
+
+// GetGPIO43FunctionControl gets GPIO[4:3] pin function.
+func (d *Device) GetGPIO43FunctionControl() uint8 {
+	return d.read8bit(RegGPIO43FunctionControl)
+}
+
+// SetPEKParameterSet sets PEK press key parameter.
+func (d *Device) SetPEKParameterSet(a uint8) {
+	d.write1Byte(RegPEKParameterSet, a)
+}
+
+// GetPEKParameterSet gets PEK press key parameter.
+func (d *Device) GetPEKParameterSet() uint8 {
+	return d.read8bit(RegPEKParameterSet)
+}
+
+// SetADCEnableSet sets ADC enable 1.
+func (d *Device) SetADCEnableSet(a uint8) {
+	d.write1Byte(RegADCEnableSet, a)
+}
+
+// GetADCEnableSet gets ADC enable 1.
+func (d *Device) GetADCEnableSet() uint8 {
+	return d.read8bit(RegADCEnableSet)
+}
+
+// SetGPIO43SignalStatus sets GPIO[4:3] signal status.
+func (d *Device) SetGPIO43SignalStatus(a uint8) {
+	d.write1Byte(RegGPIO43SignalStatus, a)
+}
+
+// GetGPIO43SignalStatus gets GPIO[4:3] signal status.
+func (d *Device) GetGPIO43SignalStatus() uint8 {
+	return d.read8bit(RegGPIO43SignalStatus)
+}
+
+// SetDCVoltage sets DC voltage.
+func (d *Device) SetDCVoltage(number uint8, voltage uint16) {
+	if voltage < 700 {
+		voltage = 0
+	} else {
+		voltage = (voltage - 700) / 25
+	}
+
+	switch number {
+	case 0:
+		v := d.GetDCDC1VoltageSet()
+		d.SetDCDC1VoltageSet((v & 0x80) | (uint8(voltage) & 0x7F))
+	case 1:
+		v := d.GetDCDC2VoltageSet()
+		d.SetDCDC2VoltageSet((v & 0x80) | (uint8(voltage) & 0x7F))
+	case 2:
+		v := d.GetDCDC3VoltageSet()
+		d.SetDCDC3VoltageSet((v & 0x80) | (uint8(voltage) & 0x7F))
+	}
+}
+
+// SetLDOVoltage sets LDO voltage.
+func (d *Device) SetLDOVoltage(number uint8, voltage uint16) {
+	if voltage > 3300 {
+		voltage = 15
+	} else {
+		voltage = (voltage / 100) - 18
+	}
+
+	switch number {
+	case 2:
+		v := d.GetLDO23VoltageSet()
+		d.SetLDO23VoltageSet((v & 0x0F) | (uint8(voltage) << 4))
+		break
+	case 3:
+		v := d.GetLDO23VoltageSet()
+		d.SetLDO23VoltageSet((v & 0xF0) | uint8(voltage))
+		break
+	}
+}
+
+// SetLDOEnable enable LDO.
+func (d *Device) SetLDOEnable(number uint8, state bool) {
+	mark := uint8(0x01)
+	mark <<= number
+	switch number {
+	case 2:
+		v := d.GetDCDC13LDO23Switch()
+		d.SetDCDC13LDO23Switch(v | mark)
+	case 3:
+		v := d.GetDCDC13LDO23Switch()
+		d.SetDCDC13LDO23Switch(v & (^mark))
+	}
+}
+
+func (d *Device) write1Byte(reg, data uint8) {
+	d.bus.WriteRegister(d.Address, reg, []byte{data})
+}
+
+func (d *Device) read8bit(reg uint8) uint8 {
+	d.bus.ReadRegister(d.Address, reg, d.buf[:1])
+	return d.buf[0]
+}

axp192/m5stack-core2-axp192/axp192.go

@@ -0,0 +1,158 @@
+package axp192
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers"
+	axp192orig "tinygo.org/x/drivers/axp192"
+)
+
+// Device wraps an I2C connection to a AXP192 device.
+type Device struct {
+	*axp192orig.Device
+	LED    Pin
+	RST    Pin
+	SPK_EN Pin
+}
+
+// New creates a new AXP192 connection. The I2C bus must already be
+// configured.
+//
+// This function only creates the Device object, it does not touch the device.
+func New(i2c drivers.I2C) *Device {
+	d := axp192orig.New(i2c)
+
+	axp := &Device{
+		Device: d,
+	}
+	axp.LED = Pin{pin: 1, axp: axp}
+	axp.SPK_EN = Pin{pin: 2, axp: axp}
+	axp.RST = Pin{pin: 4, axp: axp}
+
+	axp.begin()
+
+	return axp
+}
+
+type Config struct {
+}
+
+// Configure sets up the device for communication
+func (d *Device) Configure(config Config) error {
+	return d.Device.Configure(axp192orig.Config{})
+}
+
+func (d *Device) begin() {
+	d.SetVbusIPSOutAccessManagement((d.GetVbusIPSOutAccessManagement() & 0x04) | 0x02)
+	d.SetGPIO1Control(d.GetGPIO1Control() & 0xF8)
+	d.SetGPIO2Control(d.GetGPIO2Control() & 0xF8)
+	d.SetBackupBatteryChargingControl((d.GetBackupBatteryChargingControl() & 0x1C) | 0xA2)
+	d.SetESPVoltage(3350)
+	d.SetLcdVoltage(3300)
+	d.SetLDOVoltage(2, 3300) //Periph power voltage preset (LCD_logic, SD card)
+	d.SetLDOVoltage(3, 2000) //Vibrator power voltage preset
+
+	d.SetLDOEnable(2, true)
+	d.SetDCDC3(true) // LCD Backlight
+	// GPIO4 : LCD Reset
+	d.SetGPIO43FunctionControl((d.GetGPIO43FunctionControl() & 0x72) | 0x84)
+	// Power On/Off Setting
+	d.SetPEKParameterSet(0x4C)
+	d.SetADCEnableSet(0xFF)
+
+	d.RST.Low()
+	time.Sleep(100 * time.Millisecond)
+	d.RST.High()
+	time.Sleep(100 * time.Millisecond)
+}
+
+// ToggleLED toggles LED connected to AXP192.
+func (d *Device) ToggleLED() {
+	v := d.GetGPIO20SignalStatus()
+	if (v & 0x02) > 0 {
+		d.SetGPIO20SignalStatus(v & 0xFD)
+	} else {
+		d.SetGPIO20SignalStatus(v | 0x02)
+	}
+}
+
+// SetESPVoltage sets voltage of ESP32.
+func (d *Device) SetESPVoltage(voltage uint16) {
+	if voltage >= 3000 && voltage <= 3400 {
+		d.SetDCVoltage(0, voltage)
+	}
+}
+
+// SetLcdVoltage sets voltage of LCD.
+func (d *Device) SetLcdVoltage(voltage uint16) {
+	if voltage >= 2500 && voltage <= 3300 {
+		d.SetDCVoltage(2, voltage)
+	}
+}
+
+// SetDCDC3 enables or disables DCDC3.
+func (d *Device) SetDCDC3(State bool) {
+	v := d.GetDCDC13LDO23Switch()
+	if State == true {
+		v = (1 << 1) | v
+	} else {
+		v = ^(uint8(1) << 1) & v
+	}
+	d.SetDCDC13LDO23Switch(v)
+}
+
+// Pin is a single pin on AXP192.
+type Pin struct {
+	pin uint8
+	axp *Device
+}
+
+// High sets this GPIO pin to high.
+func (p Pin) High() {
+	switch p.pin {
+	case 1: // LED
+		v := p.axp.GetGPIO20SignalStatus()
+		p.axp.SetGPIO20SignalStatus(v | 0x02)
+	case 2: // SPK_EN
+	case 4: // RST
+		v := p.axp.GetGPIO43SignalStatus()
+		v |= uint8(0x02)
+		p.axp.SetGPIO43SignalStatus(v)
+	}
+}
+
+// Low sets this GPIO pin to low.
+func (p Pin) Low() {
+	switch p.pin {
+	case 1: // LED
+		v := p.axp.GetGPIO20SignalStatus()
+		p.axp.SetGPIO20SignalStatus(v & 0xFD)
+	case 2: // SPK_EN
+	case 4: // RST
+		v := p.axp.GetGPIO43SignalStatus()
+		v &= ^uint8(0x02)
+		p.axp.SetGPIO43SignalStatus(v)
+	}
+}
+
+// Toggle switches an output pin from low to high or from high to low.
+func (p Pin) Toggle() {
+	switch p.pin {
+	case 1: // LED
+		v := p.axp.GetGPIO20SignalStatus()
+		if (v & 0x02) == 0 {
+			p.axp.SetGPIO20SignalStatus(v | 0x02)
+		} else {
+			p.axp.SetGPIO20SignalStatus(v & 0xFD)
+		}
+	case 2: // SPK_EN
+	case 4: // RST
+		v := p.axp.GetGPIO43SignalStatus()
+		if (v & 0x02) == 0 {
+			v |= uint8(0x02)
+		} else {
+			v &= ^uint8(0x02)
+		}
+		p.axp.SetGPIO43SignalStatus(v)
+	}
+}

axp192/registers.go

@@ -0,0 +1,127 @@
+package axp192
+
+// power supply control class
+// 0x00 Power supply status register
+// 0x01  Power supply mode/charging status register
+// 0x04  OTG VBUS status register
+// 0x06‐09  Data buffer register
+// 0x10  EXTEN & DC‐DC2 switch register
+// 0x12  DC‐DC1/3 & LDO2/3switch register
+// 0x23  DC‐DC2 voltage set register
+// 0x25  DC‐DC2 voltage slope set register
+// 0x26  DC‐DC1voltage set register
+// 0x27  DC‐DC3 voltage set register
+// 0x28  LDO2/3 voltage set register
+// 0x30  VBUS‐IPSOUT access set register
+// 0x31  VOFF power off voltage set register
+// 0x32  Power off、battery detect、CHGLED control register
+// 0x33  Charging control register1
+// 0x34  Charging control register2
+// 0x35  Backup battery charging control register
+// 0x36  PEK parameter set register
+// 0x37  DCDC switch frequency set register
+// 0x38  Battery charging under temperature warning set register
+// 0x39  Battery charging over temperature warning set register
+// 0x3A  APS under voltage Level1 set register
+// 0x3B  APS under voltage Level2 set register
+// 0x3C  Battery discharging under temperature warning set register
+// 0x3D  Battery discharging over temperature warning set register
+// 0x80  DCDC mode set register
+// 0x82  ADC enable set register 1
+// 0x83  ADC enable set register 2
+// 0x84  ADC sample frequency set, TS pin control register
+// 0x85  GPIO [3:0] input range set register
+// 0x8A  Timer control register
+// 0x8B  VBUS monitor set register
+// 0x8F  Over temperature power off control register
+
+// GPIO control class
+// 0x90  GPIO0 control register
+// 0x91  GPIO0 LDO mode output voltage set register
+// 0x92  GPIO1 control register
+// 0x93  GPIO2 control register
+// 0x94  GPIO[2:0] signal status register
+// 0x95  GPIO[4:3] function control register
+// 0x96  GPIO[4:3] signal status register
+// 0x97  GPIO[2:0] pull down control register
+// 0x98  PWM1 frequency set register
+// 0x99  PWM1 duty ratio set register 1
+// 0x9A  PWM1 duty ratio set register 2
+// 0x9B  PWM2 frequency set register
+// 0x9C  PWM2 duty ratio set register 1
+// 0x9D  PWM2 duty ratio set register 2
+// 0x9E  GPIO5 control register
+
+// IRQ control class
+// 0x40  IRQ enable control register 1
+// 0x41  IRQ enable control register 2
+// 0x42  IRQ enable control register 3
+// 0x43  IRQ enable control register 4
+// 0x44  IRQ status register 1
+// 0x45  IRQ status register 2
+// 0x46  IRQ status register 3
+// 0x47  IRQ status register 4
+
+// ADC data class
+// 0x56  ACIN voltage ADC data high 8 bit
+// 0x57  ACIN voltage ADC data low 4 bit
+// 0x58  ACIN current ADC data high 8 bit
+// 0x59  ACIN current ADC data low 4 bit
+// 0x5A  VBUS voltage ADC data high 8 bit
+// 0x5B  VBUS voltage ADC data low 4 bit
+// 0x5C  VBUS current ADC data high 8 bit
+// 0x5D  VBUS current ADC data low 4 bit
+// 0x5E  AXP192 internal temperature monitor ADC data High 8 bit
+// 0x5F  AXP192 internal temperature monitor ADC data low 4 bit
+// 0x62  TS input ADC data High 8 bit，monitor battery temperature by default
+// 0x63  TS input ADC data low 4 bit，monitor battery temperature by default
+// 0x64  GPIO0 voltage ADC data high 8 bit
+// 0x65  GPIO0 voltage ADC data low 4 bit
+// 0x66  GPIO1 voltage ADC data high 8 bit
+// 0x67  GPIO1 voltage ADC data low 4 bit
+// 0x68  GPIO2 voltage ADC data high 8 bit
+// 0x69  GPIO2 voltage ADC data low 4 bit
+// 0x6A  GPIO[3] voltage ADC data high 8 bit
+// 0x6B  GPIO[3] voltage ADC data low 4 bit
+// 0x70  Battery instantaneous power high 8 bit
+// 0x71  Battery instantaneous power middle 8 bit
+// 0x72  Battery instantaneous power low 8 bit
+// 0x78  Battery voltage high 8 bit
+// 0x79  Battery voltage low 4 bit
+// 0x7A  Battery charging current high 8 bit
+// 0x7B  Battery charging current low 5 bit
+// 0x7C  Battery discharging current high 8 bit
+// 0x7D  Battery discharging current low 5 bit
+// 0x7E  APS voltage high 8 bit
+// 0x7F  APS voltage low 4 bit
+// 0xB0  Battery charging coulomb counter data register 3
+// 0xB1  Battery charging coulomb counter data register 2
+// 0xB2  Battery charging coulomb counter data register 1
+// 0xB3  Battery charging coulomb counter data register 0
+// 0xB4  Battery discharging coulomb counter data register 3
+// 0xB5  Battery discharging coulomb counter data register 2
+// 0xB6  Battery discharging coulomb counter data register 1
+// 0xB7  Battery discharging coulomb counter data register 0
+// 0xB8  Coulomb counter control register
+
+const (
+	// Address is default I2C address.
+	Address = 0x34
+
+	RegPowerSupplyStatus            = 0x00
+	RegDCDC13LDO23Switch            = 0x12
+	RegVbusIPSOutAccessManagement   = 0x30
+	RegBackupBatteryChargingControl = 0x35
+	RegDCDC2VoltageSet              = 0x25
+	RegDCDC1VoltageSet              = 0x26
+	RegDCDC3VoltageSet              = 0x27
+	RegLDO23VoltageSet              = 0x28
+	RegPEKParameterSet              = 0x36
+	RegADCEnableSet                 = 0x82
+
+	RegGPIO1Control          = 0x92
+	RegGPIO2Control          = 0x93
+	RegGPIO20SignalStatus    = 0x94
+	RegGPIO43FunctionControl = 0x95
+	RegGPIO43SignalStatus    = 0x96
+)

bh1750/bh1750.go

@@ -2,7 +2,6 @@
 //
 // Datasheet:
 // https://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf
-//
 package bh1750 // import "tinygo.org/x/drivers/bh1750"
 
 import (

blinkm/blinkm.go

@@ -1,7 +1,6 @@
 // Package blinkm implements a driver for the BlinkM I2C RGB LED.
 //
 // Datasheet: http://thingm.com/fileadmin/thingm/downloads/BlinkM_datasheet.pdf
-//
 package blinkm // import "tinygo.org/x/drivers/blinkm"
 
 import "tinygo.org/x/drivers"

bme280/bme280.go

@@ -3,11 +3,11 @@
 //
 // Datasheet:
 // https://cdn-shop.adafruit.com/datasheets/BST-BME280_DS001-10.pdf
-//
 package bme280
 
 import (
 	"math"
+	"time"
 
 	"tinygo.org/x/drivers"
 )
@@ -34,11 +34,27 @@ type calibrationCoefficients struct {
 	h6 int8
 }
 
+type Oversampling byte
+type Mode byte
+type FilterCoefficient byte
+type Period byte
+
+// Config contains settings for filtering, sampling, and modes of operation
+type Config struct {
+	Pressure    Oversampling
+	Temperature Oversampling
+	Humidity    Oversampling
+	Period      Period
+	Mode        Mode
+	IIR         FilterCoefficient
+}
+
 // Device wraps an I2C connection to a BME280 device.
 type Device struct {
 	bus                     drivers.I2C
 	Address                 uint16
 	calibrationCoefficients calibrationCoefficients
+	Config                  Config
 }
 
 // New creates a new BME280 connection. The I2C bus must already be
@@ -52,9 +68,34 @@ func New(bus drivers.I2C) Device {
 	}
 }
 
-// Configure sets up the device for communication and
-// read the calibration coefficientes.
+// ConfigureWithSettings sets up the device for communication and
+// read the calibration coefficients.
+//
+// The default configuration is the Indoor Navigation settings
+// from the BME280 datasheet.
 func (d *Device) Configure() {
+	d.ConfigureWithSettings(Config{})
+}
+
+// ConfigureWithSettings sets up the device for communication and
+// read the calibration coefficients.
+//
+// The default configuration if config is left at defaults is
+// the Indoor Navigation settings from the BME280 datasheet.
+func (d *Device) ConfigureWithSettings(config Config) {
+	d.Config = config
+
+	// If config is not initialized, use Indoor Navigation defaults.
+	if d.Config == (Config{}) {
+		d.Config = Config{
+			Mode:        ModeNormal,
+			Period:      Period0_5ms,
+			Temperature: Sampling2X,
+			Humidity:    Sampling1X,
+			Pressure:    Sampling16X,
+			IIR:         Coeff16,
+		}
+	}
 
 	var data [24]byte
 	err := d.bus.ReadRegister(uint8(d.Address), REG_CALIBRATION, data[:])
@@ -94,10 +135,18 @@ func (d *Device) Configure() {
 	d.calibrationCoefficients.h4 = 0 + (int16(h2lsb[3]) << 4) | (int16(h2lsb[4] & 0x0F))
 	d.calibrationCoefficients.h5 = 0 + (int16(h2lsb[5]) << 4) | (int16(h2lsb[4]) >> 4)
 
-	d.bus.WriteRegister(uint8(d.Address), CTRL_HUMIDITY_ADDR, []byte{0x3f})
-	d.bus.WriteRegister(uint8(d.Address), CTRL_MEAS_ADDR, []byte{0xB7})
-	d.bus.WriteRegister(uint8(d.Address), CTRL_CONFIG, []byte{0x00})
+	d.Reset()
 
+	d.bus.WriteRegister(uint8(d.Address), CTRL_CONFIG, []byte{byte(d.Config.Period<<5) | byte(d.Config.IIR<<2)})
+	d.bus.WriteRegister(uint8(d.Address), CTRL_HUMIDITY_ADDR, []byte{byte(d.Config.Humidity)})
+
+	// Normal mode, start measuring now
+	if d.Config.Mode == ModeNormal {
+		d.bus.WriteRegister(uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+			byte(d.Config.Temperature<<5) |
+				byte(d.Config.Pressure<<2) |
+				byte(d.Config.Mode)})
+	}
 }
 
 // Connected returns whether a BME280 has been found.
@@ -113,6 +162,20 @@ func (d *Device) Reset() {
 	d.bus.WriteRegister(uint8(d.Address), CMD_RESET, []byte{0xB6})
 }
 
+// SetMode can set the device to Sleep, Normal or Forced mode
+//
+// Calling this method is optional, Configure can be used to set the
+// initial mode if no mode change is desired.  This method is most
+// useful to switch between Sleep and Normal modes.
+func (d *Device) SetMode(mode Mode) {
+	d.Config.Mode = mode
+
+	d.bus.WriteRegister(uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+		byte(d.Config.Temperature<<5) |
+			byte(d.Config.Pressure<<2) |
+			byte(d.Config.Mode)})
+}
+
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
 func (d *Device) ReadTemperature() (int32, error) {
 	data, err := d.readData()
@@ -149,7 +212,8 @@ func (d *Device) ReadHumidity() (int32, error) {
 // ReadAltitude returns the current altitude in meters based on the
 // current barometric pressure and estimated pressure at sea level.
 // Calculation is based on code from Adafruit BME280 library
-// 	https://github.com/adafruit/Adafruit_BME280_Library
+//
+//	https://github.com/adafruit/Adafruit_BME280_Library
 func (d *Device) ReadAltitude() (alt int32, err error) {
 	mPa, _ := d.ReadPressure()
 	atmP := float32(mPa) / 100000
@@ -186,6 +250,16 @@ func readIntLE(msb byte, lsb byte) int16 {
 // readData does a burst read from 0xF7 to 0xF0 according to the datasheet
 // resulting in an slice with 8 bytes 0-2 = pressure / 3-5 = temperature / 6-7 = humidity
 func (d *Device) readData() (data [8]byte, err error) {
+	if d.Config.Mode == ModeForced {
+		// Write the CTRL_MEAS register to trigger a measurement
+		d.bus.WriteRegister(uint8(d.Address), CTRL_MEAS_ADDR, []byte{
+			byte(d.Config.Temperature<<5) |
+				byte(d.Config.Pressure<<2) |
+				byte(d.Config.Mode)})
+
+		time.Sleep(d.measurementDelay())
+	}
+
 	err = d.bus.ReadRegister(uint8(d.Address), REG_PRESSURE, data[:])
 	if err != nil {
 		println(err)
@@ -256,3 +330,39 @@ func (d *Device) calculateHumidity(data [8]byte, tFine int32) int32 {
 	return int32(100 * h)
 
 }
+
+// measurementDelay returns how much time each measurement will take
+// on the device.
+//
+// This is used in forced mode to wait until a measurement is complete.
+func (d *Device) measurementDelay() time.Duration {
+	const MeasOffset = 1250
+	const MeasDur = 2300
+	const HumMeasOffset = 575
+	const MeasScalingFactor = 1000
+
+	// delay is based on over-sampling rate - this table converts from
+	// setting to number samples
+	sampleRateConv := []int{0, 1, 2, 4, 8, 16}
+
+	tempOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		tempOsr = sampleRateConv[d.Config.Temperature]
+	}
+
+	presOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		presOsr = sampleRateConv[d.Config.Pressure]
+	}
+
+	humOsr := 16
+	if d.Config.Temperature <= Sampling16X {
+		humOsr = sampleRateConv[d.Config.Humidity]
+	}
+
+	max_delay := ((MeasOffset + (MeasDur * tempOsr) +
+		((MeasDur * presOsr) + HumMeasOffset) +
+		((MeasDur * humOsr) + HumMeasOffset)) / MeasScalingFactor)
+
+	return time.Duration(max_delay) * time.Millisecond
+}

bme280/registers.go

@@ -20,6 +20,50 @@ const (
 	CHIP_ID  = 0x60
 )
 
+// Increasing sampling rate increases precision but also the wait time for measurements. The datasheet has a table of
+// suggested values for oversampling, output data rates, and iir filter coefficients by use case.
+const (
+	SamplingOff Oversampling = iota
+	Sampling1X
+	Sampling2X
+	Sampling4X
+	Sampling8X
+	Sampling16X
+)
+
+// In normal mode (the default) the sensor takes masurements periodically.  In forced
+// mode, the sensor takes a measurement only when requested.
+//
+// For use-cases with infrequent sampling, forced mode is more power efficient.
+const (
+	ModeNormal Mode = 0x03
+	ModeForced Mode = 0x01
+	ModeSleep  Mode = 0x00
+)
+
+// IIR filter coefficients, higher values means steadier measurements but slower reaction times
+const (
+	Coeff0 FilterCoefficient = iota
+	Coeff2
+	Coeff4
+	Coeff8
+	Coeff16
+)
+
+// Period of standby in normal mode which controls how often measurements are taken
+//
+// Note Period10ms and Period20ms are out of sequence, but are per the datasheet
+const (
+	Period0_5ms  Period = 0b000
+	Period62_5ms        = 0b001
+	Period125ms         = 0b010
+	Period250ms         = 0b011
+	Period500ms         = 0b100
+	Period1000ms        = 0b101
+	Period10ms          = 0b110
+	Period20ms          = 0b111
+)
+
 const (
 	SEALEVEL_PRESSURE float32 = 1013.25 // in hPa
 )

bmp180/bmp180.go

@@ -3,7 +3,6 @@
 //
 // Datasheet:
 // https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
-//
 package bmp180 // import "tinygo.org/x/drivers/bmp180"
 
 import (

buzzer/buzzer.go

@@ -1,5 +1,4 @@
 // Package buzzer provides a very simplistic driver for a connected buzzer or low-fidelity speaker.
-//
 package buzzer // import "tinygo.org/x/drivers/buzzer"
 
 import (
@@ -55,6 +54,12 @@ func (l *Device) Tone(hz, duration float64) (err error) {
 
 	tempo := ((60 / l.BPM) * (duration * 1000))
 
+	// no tone during rest, just let the duration pass.
+	if hz == Rest {
+		time.Sleep(time.Duration(tempo) * time.Millisecond)
+		return
+	}
+
 	for i := 0.0; i < tempo*1000; i += tone * 2.0 {
 		if err = l.On(); err != nil {
 			return

buzzer/notes.go

@@ -1,9 +1,9 @@
 package buzzer
 
 const (
-	Whole   = 4
-	Half    = 2
-	Quarter = 1
+	Whole   = 4.0
+	Half    = 2.0
+	Quarter = 1.0
 	Eighth  = 0.500
 )
 

dht/constants.go

@@ -1,3 +1,5 @@
+//go:build tinygo
+
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //
 // [1] Datasheet DHT11: https://www.mouser.com/datasheet/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf
@@ -7,34 +9,10 @@
 package dht // import "tinygo.org/x/drivers/dht"
 
 import (
-	"encoding/binary"
 	"machine"
 	"time"
 )
 
-// enum type for device type
-type DeviceType uint8
-
-// DeviceType specific parsing of information received from the sensor
-func (d DeviceType) extractData(buf []byte) (temp int16, hum uint16) {
-	if d == DHT11 {
-		temp = int16(buf[2])
-		if buf[3]&0x80 > 0 {
-			temp = -1 - temp
-		}
-		temp *= 10
-		temp += int16(buf[3] & 0x0f)
-		hum = 10*uint16(buf[0]) + uint16(buf[1])
-	} else {
-		hum = binary.LittleEndian.Uint16(buf[0:2])
-		temp = int16(buf[3])<<8 + int16(buf[2]&0x7f)
-		if buf[2]&0x80 > 0 {
-			temp = -temp
-		}
-	}
-	return
-}
-
 // Celsius and Fahrenheit temperature scales
 type TemperatureScale uint8
 
@@ -54,9 +32,6 @@ const (
 	startTimeout = time.Millisecond * 200
 	startingLow  = time.Millisecond * 20
 
-	DHT11 DeviceType = iota
-	DHT22
-
 	C TemperatureScale = iota
 	F
 

dht/device.go

@@ -0,0 +1,44 @@
+package dht
+
+import (
+	"encoding/binary"
+)
+
+// DeviceType is the enum type for device type
+type DeviceType uint8
+
+const (
+	DHT11 DeviceType = iota
+	DHT22
+)
+
+// extractData parses information received from the sensor.
+// The 2 first buffers are for the humidity and
+// the 2 following corresponds to the temperature.
+func (d DeviceType) extractData(buf []byte) (temp int16, hum uint16) {
+	switch d {
+	case DHT11:
+		hum = 10*uint16(buf[0]) + uint16(buf[1])
+		temp = int16(buf[2])
+		if buf[3]&0x80 > 0 {
+			temp = -1 - temp
+		}
+		temp *= 10
+		temp += int16(buf[3] & 0x0f)
+	case DHT22:
+		hum = binary.BigEndian.Uint16(buf[0:2])
+		temp = int16(buf[2]&0x7f)<<8 + int16(buf[3])
+		// the first bit corresponds to the sign bit
+		if buf[2]&0x80 > 0 {
+			temp = -temp
+		}
+	default:
+		// keeping this for retro-compatibility but not tested
+		hum = binary.LittleEndian.Uint16(buf[0:2])
+		temp = int16(buf[3])<<8 + int16(buf[2]&0x7f)
+		if buf[2]&0x80 > 0 {
+			temp = -temp
+		}
+	}
+	return
+}

dht/device_internal_test.go

@@ -0,0 +1,46 @@
+package dht
+
+import (
+	"testing"
+)
+
+func TestDeviceType_extractData(t *testing.T) {
+	bitStr := "0000001010001100000000010101111111101110"
+	buf := bitStringToBytes(bitStr)
+
+	tt := []struct {
+		name     string
+		d        DeviceType
+		buf      []byte
+		wantTemp int16
+		wantHum  uint16
+	}{
+		{
+			// temp = 35.1C hum = 65.2%
+			name: "DHT22", d: DHT22, buf: buf, wantTemp: 351, wantHum: 652,
+		},
+	}
+
+	for _, tc := range tt {
+		t.Run(tc.name, func(t *testing.T) {
+			gotTemp, gotHum := tc.d.extractData(tc.buf)
+			if gotTemp != tc.wantTemp {
+				t.Errorf("extractData() gotTemp = %v, want %v", gotTemp, tc.wantTemp)
+			}
+			if gotHum != tc.wantHum {
+				t.Errorf("extractData() gotHum = %v, want %v", gotHum, tc.wantHum)
+			}
+		})
+	}
+}
+
+func bitStringToBytes(s string) []byte {
+	b := make([]byte, (len(s)+(8-1))/8)
+	for i, r := range s {
+		if r < '0' || r > '1' {
+			panic("not in range")
+		}
+		b[i>>3] |= byte(r-'0') << uint(7-i&7)
+	}
+	return b
+}

dht/highfreq.go

@@ -1,5 +1,4 @@
 //go:build mimxrt1062 || stm32f405 || atsamd51 || stm32f103xx || k210 || stm32f407
-// +build mimxrt1062 stm32f405 atsamd51 stm32f103xx k210 stm32f407
 
 package dht // import "tinygo.org/x/drivers/dht"
 

dht/lowfreq.go

@@ -1,5 +1,4 @@
 //go:build !mimxrt1062 && !stm32f405 && !atsamd51 && !stm32f103xx && !k210 && !stm32f407
-// +build !mimxrt1062,!stm32f405,!atsamd51,!stm32f103xx,!k210,!stm32f407
 
 package dht // import "tinygo.org/x/drivers/dht"
 

dht/thermometer.go

@@ -1,3 +1,5 @@
+//go:build tinygo
+
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //
 // [1] Datasheet DHT11: https://www.mouser.com/datasheet/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf
@@ -8,6 +10,7 @@ package dht // import "tinygo.org/x/drivers/dht"
 
 import (
 	"machine"
+	"runtime/interrupt"
 	"time"
 )
 
@@ -157,8 +160,8 @@ func (t *device) read() error {
 // interrupts
 func receiveSignals(pin machine.Pin, result []counter) {
 	i := uint8(0)
-	machine.UART1.Interrupt.Disable()
-	defer machine.UART1.Interrupt.Enable()
+	mask := interrupt.Disable()
+	defer interrupt.Restore(mask)
 	for ; i < 40; i++ {
 		result[i*2] = expectChange(pin, false)
 		result[i*2+1] = expectChange(pin, true)

dht/timesafethermometer.go

@@ -1,3 +1,5 @@
+//go:build tinygo
+
 // Package dht provides a driver for DHTXX family temperature and humidity sensors.
 //
 // [1] Datasheet DHT11: https://www.mouser.com/datasheet/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf

dht/util.go

@@ -1,3 +1,5 @@
+//go:build tinygo
+
 package dht // import "tinygo.org/x/drivers/dht"
 
 import (

drivers.go

@@ -3,22 +3,22 @@
 //
 // Here is an example in TinyGo that uses the BMP180 digital barometer:
 //
-// 	package main
+//	package main
 //
-// 	import (
+//	import (
 //		"time"
 //		"machine"
 //
-// 		"tinygo.org/x/drivers/bmp180"
-// 	)
+//		"tinygo.org/x/drivers/bmp180"
+//	)
 //
-// 	func main() {
+//	func main() {
 //		machine.I2C0.Configure(machine.I2CConfig{})
 //		sensor := bmp180.New(machine.I2C0)
 //		sensor.Configure()
 //
-// 		connected := sensor.Connected()
-// 		if !connected {
+//		connected := sensor.Connected()
+//		if !connected {
 //			println("BMP180 not detected")
 //			return
 //		}
@@ -38,5 +38,4 @@
 // Each individual driver is contained within its own sub-package within this package and
 // there are no interdependencies in order to minimize the final size of compiled code that
 // uses any of these drivers.
-//
 package drivers // import "tinygo.org/x/drivers"

ds1307/ds1307.go

@@ -2,7 +2,6 @@
 //
 // Datasheet:
 // https://datasheets.maximintegrated.com/en/ds/DS1307.pdf
-//
 package ds1307 // import "tinygo.org/x/drivers/ds1307"
 
 import (

easystepper/easystepper.go

@@ -2,28 +2,76 @@
 package easystepper // import "tinygo.org/x/drivers/easystepper"
 
 import (
+	"errors"
 	"machine"
 	"time"
 )
 
+// StepMode determines the coil sequence used to perform a single step
+type StepMode uint8
+
+// Valid values for StepMode
+const (
+	// ModeFour uses a 'four step' coil sequence (12-23-34-41). This is the default (zero-value) mode
+	ModeFour StepMode = iota
+	// ModeEight uses an 'eight step' coil sequence (1-12-2-23-3-34-4-41)
+	ModeEight
+)
+
+// stepCount is a helper function to return the number of steps in a StepMode sequence
+func (sm StepMode) stepCount() uint {
+	switch sm {
+	default:
+		fallthrough
+	case ModeFour:
+		return 4
+	case ModeEight:
+		return 8
+	}
+}
+
+// DeviceConfig contains the configuration data for a single easystepper driver
+type DeviceConfig struct {
+	// Pin1 ... Pin4 determines the pins to configure and use for the device
+	Pin1, Pin2, Pin3, Pin4 machine.Pin
+	// StepCount is the number of steps required to perform a full revolution of the stepper motor
+	StepCount uint
+	// RPM determines the speed of the stepper motor in 'Revolutions per Minute'
+	RPM uint
+	// Mode determines the coil sequence used to perform a single step
+	Mode StepMode
+}
+
+// DualDeviceConfig contains the configuration data for a dual easystepper driver
+type DualDeviceConfig struct {
+	DeviceConfig
+	// Pin5 ... Pin8 determines the pins to configure and use for the second device
+	Pin5, Pin6, Pin7, Pin8 machine.Pin
+}
+
 // Device holds the pins and the delay between steps
 type Device struct {
 	pins       [4]machine.Pin
-	stepDelay  int32
+	stepDelay  time.Duration
 	stepNumber uint8
+	stepMode   StepMode
 }
 
 // DualDevice holds information for controlling 2 motors
 type DualDevice struct {
-	devices [2]Device
+	devices [2]*Device
 }
 
-// New returns a new easystepper driver given 4 pins, number of steps and rpm
-func New(pin1, pin2, pin3, pin4 machine.Pin, steps int32, rpm int32) Device {
-	return Device{
-		pins:      [4]machine.Pin{pin1, pin2, pin3, pin4},
-		stepDelay: 60000000 / (steps * rpm),
+// New returns a new single easystepper driver given a DeviceConfig
+func New(config DeviceConfig) (*Device, error) {
+	if config.StepCount == 0 || config.RPM == 0 {
+		return nil, errors.New("config.StepCount and config.RPM must be > 0")
 	}
+	return &Device{
+		pins:      [4]machine.Pin{config.Pin1, config.Pin2, config.Pin3, config.Pin4},
+		stepDelay: time.Second * 60 / time.Duration((config.StepCount * config.RPM)),
+		stepMode:  config.Mode,
+	}, nil
 }
 
 // Configure configures the pins of the Device
@@ -34,17 +82,23 @@ func (d *Device) Configure() {
 }
 
 // NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
-func NewDual(pin1, pin2, pin3, pin4, pin5, pin6, pin7, pin8 machine.Pin, steps int32, rpm int32) DualDevice {
-	var dual DualDevice
-	dual.devices[0] = Device{
-		pins:      [4]machine.Pin{pin1, pin2, pin3, pin4},
-		stepDelay: 60000000 / (steps * rpm),
+func NewDual(config DualDeviceConfig) (*DualDevice, error) {
+	// Create the first device
+	dev1, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
 	}
-	dual.devices[1] = Device{
-		pins:      [4]machine.Pin{pin5, pin6, pin7, pin8},
-		stepDelay: 60000000 / (steps * rpm),
+	// Create the second device
+	config.DeviceConfig.Pin1 = config.Pin5
+	config.DeviceConfig.Pin2 = config.Pin6
+	config.DeviceConfig.Pin3 = config.Pin7
+	config.DeviceConfig.Pin4 = config.Pin8
+	dev2, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
 	}
-	return dual
+	// Return composite dual device
+	return &DualDevice{devices: [2]*Device{dev1, dev2}}, nil
 }
 
 // Configure configures the pins of the DualDevice
@@ -64,7 +118,7 @@ func (d *Device) Move(steps int32) {
 	var s int32
 	d.stepMotor(d.stepNumber)
 	for s = int32(d.stepNumber); s < steps; s++ {
-		time.Sleep(time.Duration(d.stepDelay) * time.Microsecond)
+		time.Sleep(d.stepDelay)
 		d.moveDirectionSteps(direction, s)
 	}
 }
@@ -101,7 +155,7 @@ func (d *DualDevice) Move(stepsA, stepsB int32) {
 	stepsA += int32(d.devices[max].stepNumber)
 	minStep = int32(d.devices[min].stepNumber)
 	for s := int32(d.devices[max].stepNumber); s < stepsA; s++ {
-		time.Sleep(time.Duration(d.devices[0].stepDelay) * time.Microsecond)
+		time.Sleep(d.devices[0].stepDelay)
 		d.devices[max].moveDirectionSteps(directions[max], s)
 
 		if ((s * stepsB) / stepsA) > minStep {
@@ -119,6 +173,18 @@ func (d *DualDevice) Off() {
 
 // stepMotor changes the pins' state to the correct step
 func (d *Device) stepMotor(step uint8) {
+	switch d.stepMode {
+	default:
+		fallthrough
+	case ModeFour:
+		d.stepMotor4(step)
+	case ModeEight:
+		d.stepMotor8(step)
+	}
+}
+
+// stepMotor4 changes the pins' state to the correct step in 4-step mode
+func (d *Device) stepMotor4(step uint8) {
 	switch step {
 	case 0:
 		d.pins[0].High()
@@ -148,13 +214,63 @@ func (d *Device) stepMotor(step uint8) {
 	d.stepNumber = step
 }
 
+// stepMotor8 changes the pins' state to the correct step in 8-step mode
+func (d *Device) stepMotor8(step uint8) {
+	switch step {
+	case 0:
+		d.pins[0].High()
+		d.pins[2].Low()
+		d.pins[1].Low()
+		d.pins[3].Low()
+	case 1:
+		d.pins[0].High()
+		d.pins[2].High()
+		d.pins[1].Low()
+		d.pins[3].Low()
+	case 2:
+		d.pins[0].Low()
+		d.pins[2].High()
+		d.pins[1].Low()
+		d.pins[3].Low()
+	case 3:
+		d.pins[0].Low()
+		d.pins[2].High()
+		d.pins[1].High()
+		d.pins[3].Low()
+	case 4:
+		d.pins[0].Low()
+		d.pins[2].Low()
+		d.pins[1].High()
+		d.pins[3].Low()
+	case 5:
+		d.pins[0].Low()
+		d.pins[2].Low()
+		d.pins[1].High()
+		d.pins[3].High()
+	case 6:
+		d.pins[0].Low()
+		d.pins[2].Low()
+		d.pins[1].Low()
+		d.pins[3].High()
+	case 7:
+		d.pins[0].High()
+		d.pins[2].Low()
+		d.pins[1].Low()
+		d.pins[3].High()
+	}
+	d.stepNumber = step
+}
+
 // moveDirectionSteps uses the direction to calculate the correct step and change the motor to it.
-// Direction true: 0, 1, 2, 3, 0, 1, 2, ...
-// Direction false: 0, 3, 2, 1, 0, 3, 2, ...
+// Direction true:  (4-step mode) 0, 1, 2, 3, 0, 1, 2, ...
+// Direction false: (4-step mode) 0, 3, 2, 1, 0, 3, 2, ...
+// Direction true:  (8-step mode) 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, ...
+// Direction false: (8-step mode) 0, 7, 6, 5, 4, 3, 2, 1, 0, 7, 6, ...
 func (d *Device) moveDirectionSteps(direction bool, step int32) {
+	modulus := int32(d.stepMode.stepCount())
 	if direction {
-		d.stepMotor(uint8(step % 4))
+		d.stepMotor(uint8(step % modulus))
 	} else {
-		d.stepMotor(uint8((step + 2*(step%2)) % 4))
+		d.stepMotor(uint8(((-step % modulus) + modulus) % modulus))
 	}
 }

espat/adapter.go

@@ -0,0 +1,20 @@
+package espat
+
+import (
+	"time"
+
+	"tinygo.org/x/drivers/net"
+)
+
+func (d *Device) ConnectToAccessPoint(ssid, pass string, timeout time.Duration) error {
+	if len(ssid) == 0 {
+		return net.ErrWiFiMissingSSID
+	}
+
+	d.SetWifiMode(WifiModeClient)
+	return d.ConnectToAP(ssid, pass, int(timeout.Seconds()))
+}
+
+func (d *Device) Disconnect() error {
+	return d.DisconnectFromAP()
+}

espat/espat.go

@@ -15,7 +15,6 @@
 //
 // AT command set:
 // https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
-//
 package espat // import "tinygo.org/x/drivers/espat"
 
 import (

espat/tcp.go

@@ -29,7 +29,7 @@ func (d *Device) GetDNS(domain string) (string, error) {
 		return "", errors.New("Invalid domain lookup result")
 	}
 	res := strings.Split(r[1], "\r\n")
-	return res[0], nil
+	return strings.Trim(res[0], `"`), nil
 }
 
 // ConnectTCPSocket creates a new TCP socket connection for the ESP8266/ESP32.

examples/apds9960/color/main.go

@@ -0,0 +1,39 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/apds9960"
+)
+
+func main() {
+
+	// use Nano 33 BLE Sense's internal I2C bus
+	machine.I2C1.Configure(machine.I2CConfig{
+		SCL:       machine.SCL1_PIN,
+		SDA:       machine.SDA1_PIN,
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	sensor := apds9960.New(machine.I2C1)
+
+	sensor.Configure(apds9960.Configuration{}) // use default settings
+
+	if !sensor.Connected() {
+		println("APDS-9960 not connected!")
+		return
+	}
+
+	sensor.EnableColor() // enable color engine
+
+	for {
+
+		if sensor.ColorAvailable() {
+			r, g, b, c := sensor.ReadColor()
+			println("Red =", r, "\tGreen =", g, "\tBlue =", b, "\tClear =", c)
+		}
+		time.Sleep(time.Millisecond * 100)
+	}
+
+}

examples/apds9960/gesture/main.go

@@ -0,0 +1,52 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/apds9960"
+)
+
+func main() {
+
+	// use Nano 33 BLE Sense's internal I2C bus
+	machine.I2C1.Configure(machine.I2CConfig{
+		SCL:       machine.SCL1_PIN,
+		SDA:       machine.SDA1_PIN,
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	sensor := apds9960.New(machine.I2C1)
+
+	sensor.Configure(apds9960.Configuration{}) // use default settings
+
+	if !sensor.Connected() {
+		println("APDS-9960 not connected!")
+		return
+	}
+
+	sensor.EnableGesture() // enable gesture engine
+
+	for {
+
+		// wave your hand (not too slow) about 10 cm above the sensor
+		if sensor.GestureAvailable() {
+
+			gesture := sensor.ReadGesture()
+			print("Detected gesture: ")
+			switch gesture {
+			case apds9960.GESTURE_UP: // the nRF52 chip is "up"
+				println("Up")
+			case apds9960.GESTURE_DOWN:
+				println("Down")
+			case apds9960.GESTURE_LEFT:
+				println("Left")
+			case apds9960.GESTURE_RIGHT:
+				println("Right")
+			}
+		}
+		// note: the delay shouldn't be too long, otherwise new gesture data might be lost
+		time.Sleep(time.Millisecond * 250)
+	}
+
+}

examples/apds9960/proximity/main.go

@@ -0,0 +1,40 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/apds9960"
+)
+
+func main() {
+
+	// use Nano 33 BLE Sense's internal I2C bus
+	machine.I2C1.Configure(machine.I2CConfig{
+		SCL:       machine.SCL1_PIN,
+		SDA:       machine.SDA1_PIN,
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	sensor := apds9960.New(machine.I2C1)
+
+	// use default settings
+	sensor.Configure(apds9960.Configuration{})
+
+	if !sensor.Connected() {
+		println("APDS-9960 not connected!")
+		return
+	}
+
+	sensor.EnableProximity() // enable proximity engine
+
+	for {
+
+		if sensor.ProximityAvailable() {
+			p := sensor.ReadProximity()
+			println("Proximity:", p)
+		}
+		time.Sleep(time.Millisecond * 100)
+	}
+
+}

examples/axp192/m5stack-core2-blinky/main.go

@@ -0,0 +1,25 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	axp192 "tinygo.org/x/drivers/axp192/m5stack-core2-axp192"
+	"tinygo.org/x/drivers/i2csoft"
+)
+
+func main() {
+	i2c := i2csoft.New(machine.SCL0_PIN, machine.SDA0_PIN)
+	i2c.Configure(i2csoft.I2CConfig{Frequency: 100e3})
+
+	axp := axp192.New(i2c)
+	led := axp.LED
+
+	for {
+		led.Low()
+		time.Sleep(time.Millisecond * 500)
+
+		led.High()
+		time.Sleep(time.Millisecond * 500)
+	}
+}

examples/dht/main.go

@@ -12,7 +12,7 @@ func main() {
 	dhtSensor := dht.New(pin, dht.DHT11)
 	for {
 		temp, hum, err := dhtSensor.Measurements()
-		if err != nil {
+		if err == nil {
 			fmt.Printf("Temperature: %02d.%d°C, Humidity: %02d.%d%%\n", temp/10, temp%10, hum/10, hum%10)
 		} else {
 			fmt.Printf("Could not take measurements from the sensor: %s\n", err.Error())

examples/easystepper/main.go

@@ -8,7 +8,11 @@ import (
 )
 
 func main() {
-	motor := easystepper.New(machine.P13, machine.P15, machine.P14, machine.P16, 200, 75)
+	config := easystepper.DeviceConfig{
+		Pin1: machine.P13, Pin2: machine.P15, Pin3: machine.P14, Pin4: machine.P16,
+		StepCount: 200, RPM: 75, Mode: easystepper.ModeFour,
+	}
+	motor, _ := easystepper.New(config)
 	motor.Configure()
 
 	for {

examples/espat/espconsole/main.go

@@ -6,7 +6,6 @@
 //
 // More information on the Espressif AT command set at:
 // https://www.espressif.com/sites/default/files/documentation/4a-esp8266_at_instruction_set_en.pdf
-//
 package main
 
 import (
@@ -19,9 +18,11 @@ import (
 // change actAsAP to true to act as an access point instead of connecting to one.
 const actAsAP = false
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
@@ -113,8 +114,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/espat/esphub/main.go

@@ -3,7 +3,6 @@
 //
 // In other words:
 // Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266 <--> INTERNET
-//
 package main
 
 import (
@@ -17,9 +16,11 @@ import (
 // change actAsAP to true to act as an access point instead of connecting to one.
 const actAsAP = false
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // these are the default pins for the Arduino Nano33 IoT.
 // change these to connect to a different UART or pins for the ESP8266/ESP32
@@ -99,8 +100,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/espat/espstation/main.go

@@ -3,7 +3,6 @@
 //
 // In other words:
 // Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266
-//
 package main
 
 import (
@@ -14,9 +13,11 @@ import (
 	"tinygo.org/x/drivers/net"
 )
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // IP address of the listener aka "hub". Replace with your own info.
 const hubIP = "0.0.0.0"
@@ -88,8 +89,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/espat/mqttclient/main.go

@@ -7,8 +7,7 @@
 //
 // You must install the Paho MQTT package to build this program:
 //
-// 		go get -u github.com/eclipse/paho.mqtt.golang
-//
+//	go get -u github.com/eclipse/paho.mqtt.golang
 package main
 
 import (
@@ -20,9 +19,11 @@ import (
 	"tinygo.org/x/drivers/net/mqtt"
 )
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // IP address of the MQTT broker to use. Replace with your own info.
 const server = "tcp://test.mosquitto.org:1883"
@@ -108,8 +109,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/espat/mqttsub/main.go

@@ -7,8 +7,7 @@
 //
 // You must also install the Paho MQTT package to build this program:
 //
-// 		go get -u github.com/eclipse/paho.mqtt.golang
-//
+//	go get -u github.com/eclipse/paho.mqtt.golang
 package main
 
 import (
@@ -21,9 +20,11 @@ import (
 	"tinygo.org/x/drivers/net/mqtt"
 )
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // IP address of the MQTT broker to use. Replace with your own info.
 //const server = "tcp://test.mosquitto.org:1883"
@@ -129,8 +130,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/espat/tcpclient/main.go

@@ -3,7 +3,6 @@
 //
 // In other words:
 // Your computer <--> UART0 <--> MCU <--> UART1 <--> ESP8266
-//
 package main
 
 import (
@@ -14,9 +13,11 @@ import (
 	"tinygo.org/x/drivers/net"
 )
 
-// access point info
-const ssid = "YOURSSID"
-const pass = "YOURPASS"
+var (
+	// access point info
+	ssid string
+	pass string
+)
 
 // IP address of the server aka "hub". Replace with your own info.
 const serverIP = "0.0.0.0"
@@ -91,8 +92,9 @@ func connectToESP() bool {
 func connectToAP() {
 	println("Connecting to wifi network '" + ssid + "'")
 
-	adaptor.SetWifiMode(espat.WifiModeClient)
-	adaptor.ConnectToAP(ssid, pass, 10)
+	if err := adaptor.ConnectToAccessPoint(ssid, pass, 10*time.Second); err != nil {
+		failMessage(err.Error())
+	}
 
 	println("Connected.")
 	ip, err := adaptor.GetClientIP()

examples/ft6336/basic/m5stack_core2.go

@@ -0,0 +1,23 @@
+//go:build m5stack_core2
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ft6336"
+	"tinygo.org/x/drivers/i2csoft"
+	"tinygo.org/x/drivers/touch"
+)
+
+// InitDisplay initializes the display of each board.
+func initDevices() (touch.Pointer, error) {
+	i2c := i2csoft.New(machine.SCL0_PIN, machine.SDA0_PIN)
+	i2c.Configure(i2csoft.I2CConfig{Frequency: 100e3})
+
+	resistiveTouch := ft6336.New(i2c, machine.Pin(39))
+	resistiveTouch.Configure(ft6336.Config{})
+	resistiveTouch.SetPeriodActive(0x00)
+
+	return resistiveTouch, nil
+}

examples/ft6336/basic/main.go

@@ -0,0 +1,16 @@
+package main
+
+func main() {
+	touchScreen, _ := initDevices()
+
+	for {
+		touch := touchScreen.ReadTouchPoint()
+		if touch.Z > 0 {
+			//X and Y are 16 bit with 12 bit resolution and need to be scaled for the display size
+			//Z is 24 bit and is typically > 2000 for a touch
+			println("touch:", touch.X, touch.Y, touch.Z)
+			//Example of scaling for m5stack-core2's 320x240 display with 320x270 touch area
+			println("screen:", (touch.X*320)>>16, (touch.Y*270)>>16)
+		}
+	}
+}

examples/ft6336/touchpaint/m5stack_core2.go

@@ -0,0 +1,54 @@
+//go:build m5stack_core2
+
+package main
+
+import (
+	"image/color"
+	"machine"
+
+	axp192 "tinygo.org/x/drivers/axp192/m5stack-core2-axp192"
+	"tinygo.org/x/drivers/ft6336"
+	"tinygo.org/x/drivers/i2csoft"
+	"tinygo.org/x/drivers/ili9341"
+	"tinygo.org/x/drivers/touch"
+)
+
+// InitDisplay initializes the display of each board.
+func initDevices() (touchPaintDisplay, touch.Pointer, error) {
+	machine.SPI2.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40e6,
+	})
+
+	i2c := i2csoft.New(machine.SCL0_PIN, machine.SDA0_PIN)
+	i2c.Configure(i2csoft.I2CConfig{Frequency: 100e3})
+
+	axp := axp192.New(i2c)
+	led := axp.LED
+	led.Low()
+
+	display := ili9341.NewSPI(
+		machine.SPI2,
+		machine.LCD_DC_PIN,
+		machine.LCD_SS_PIN,
+		machine.NoPin,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{
+		Width:            320,
+		Height:           240,
+		DisplayInversion: true,
+	})
+	display.FillScreen(color.RGBA{255, 255, 255, 255})
+
+	display.SetRotation(ili9341.Rotation0Mirror)
+
+	resistiveTouch := ft6336.New(i2c, machine.Pin(39))
+	resistiveTouch.Configure(ft6336.Config{})
+	resistiveTouch.SetPeriodActive(0x00)
+
+	return display, resistiveTouch, nil
+}

examples/ft6336/touchpaint/main.go

@@ -0,0 +1,163 @@
+package main
+
+import (
+	"image/color"
+	"math"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/touch"
+)
+
+type touchPaintDisplay interface {
+	drivers.Displayer
+	FillRectangle(x, y, width, height int16, c color.RGBA) error
+	DrawRectangle(x, y, w, h int16, c color.RGBA) error
+}
+
+var (
+	white   = color.RGBA{255, 255, 255, 255}
+	black   = color.RGBA{0, 0, 0, 255}
+	red     = color.RGBA{255, 0, 0, 255}
+	green   = color.RGBA{0, 255, 0, 255}
+	blue    = color.RGBA{0, 0, 255, 255}
+	magenta = color.RGBA{255, 0, 255, 255}
+	yellow  = color.RGBA{255, 255, 0, 255}
+	cyan    = color.RGBA{0, 255, 255, 255}
+
+	oldColor     color.RGBA
+	currentColor color.RGBA
+)
+
+const (
+	penRadius = 3
+	boxSize   = 30
+
+	Xmin = 0
+	Xmax = 0xFFFF
+	Ymin = 0
+	Ymax = 0xFFFF
+)
+
+func main() {
+	display, resistiveTouch, _ := initDevices()
+
+	// fill the background and activate the backlight
+	width, height := display.Size()
+	display.FillRectangle(0, 0, width, height, black)
+
+	// make color selection boxes
+	display.FillRectangle(0, 0, boxSize, boxSize, red)
+	display.FillRectangle(boxSize, 0, boxSize, boxSize, yellow)
+	display.FillRectangle(boxSize*2, 0, boxSize, boxSize, green)
+	display.FillRectangle(boxSize*3, 0, boxSize, boxSize, cyan)
+	display.FillRectangle(boxSize*4, 0, boxSize, boxSize, blue)
+	display.FillRectangle(boxSize*5, 0, boxSize, boxSize, magenta)
+	display.FillRectangle(boxSize*6, 0, boxSize, boxSize, black)
+	display.FillRectangle(boxSize*7, 0, boxSize, boxSize, white)
+
+	// set the initial color to red and draw a box to highlight it
+	oldColor = red
+	currentColor = red
+	display.DrawRectangle(0, 0, boxSize, boxSize, white)
+
+	last := touch.Point{}
+
+	// loop and poll for touches, including performing debouncing
+	debounce := 0
+	for {
+
+		point := resistiveTouch.ReadTouchPoint()
+		touch := touch.Point{}
+		if point.Z>>6 > 100 {
+			rawX := mapval(point.X, Xmin, Xmax, 0, int(width))
+			rawY := mapval(point.Y, Ymin, Ymax, 0, int(height))
+			touch.X = rawX
+			touch.Y = rawY
+			touch.Z = 1
+		} else {
+			touch.X = 0
+			touch.Y = 0
+			touch.Z = 0
+		}
+
+		if last.Z != touch.Z {
+			debounce = 0
+			last = touch
+		} else if math.Abs(float64(touch.X-last.X)) > 4 ||
+			math.Abs(float64(touch.Y-last.Y)) > 4 {
+			debounce = 0
+			last = touch
+		} else if debounce > 1 {
+			debounce = 0
+			HandleTouch(display, last)
+		} else if touch.Z > 0 {
+			debounce++
+		} else {
+			last = touch
+			debounce = 0
+		}
+
+	}
+}
+
+// based on Arduino's "map" function
+func mapval(x int, inMin int, inMax int, outMin int, outMax int) int {
+	return (x-inMin)*(outMax-outMin)/(inMax-inMin) + outMin
+}
+
+func HandleTouch(display touchPaintDisplay, touch touch.Point) {
+
+	if int16(touch.Y) < boxSize {
+		oldColor = currentColor
+		x := int16(touch.X)
+		switch {
+		case x < boxSize:
+			currentColor = red
+		case x < boxSize*2:
+			currentColor = yellow
+		case x < boxSize*3:
+			currentColor = green
+		case x < boxSize*4:
+			currentColor = cyan
+		case x < boxSize*5:
+			currentColor = blue
+		case x < boxSize*6:
+			currentColor = magenta
+		case x < boxSize*7:
+			currentColor = black
+		case x < boxSize*8:
+			currentColor = white
+		}
+
+		if oldColor == currentColor {
+			return
+		}
+
+		display.DrawRectangle((x/boxSize)*boxSize, 0, boxSize, boxSize, white)
+		switch oldColor {
+		case red:
+			x = 0
+		case yellow:
+			x = boxSize
+		case green:
+			x = boxSize * 2
+		case cyan:
+			x = boxSize * 3
+		case blue:
+			x = boxSize * 4
+		case magenta:
+			x = boxSize * 5
+		case black:
+			x = boxSize * 6
+		case white:
+			x = boxSize * 7
+		}
+		display.FillRectangle(int16(x), 0, boxSize, boxSize, oldColor)
+
+	}
+
+	if (int16(touch.Y) - penRadius) > boxSize {
+		display.FillRectangle(
+			int16(touch.X), int16(touch.Y), penRadius*2, penRadius*2, currentColor)
+	}
+}

examples/gc9a01/main.go

@@ -0,0 +1,39 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"image/color"
+
+	"tinygo.org/x/drivers/gc9a01"
+)
+
+func main() {
+	machine.SPI0.Configure(machine.SPIConfig{
+		Frequency: 80000000,
+	})
+	display := gc9a01.New(machine.SPI0, machine.P6, machine.P7, machine.P8, machine.P9)
+	display.Configure(gc9a01.Config{Orientation: gc9a01.HORIZONTAL, Width: 240, Height: 240})
+
+	width, height := display.Size()
+
+	white := color.RGBA{255, 255, 255, 255}
+	red := color.RGBA{255, 0, 0, 255}
+	blue := color.RGBA{0, 0, 255, 255}
+	green := color.RGBA{0, 255, 0, 255}
+	black := color.RGBA{0, 0, 0, 255}
+
+	display.FillScreen(black)
+
+	display.FillRectangle(0, 0, width/2, height/2, white)
+	display.FillRectangle(width/2, 0, width/2, height/2, red)
+	display.FillRectangle(0, height/2, width/2, height/2, green)
+	display.FillRectangle(width/2, height/2, width/2, height/2, blue)
+	display.FillRectangle(width/4, height/4, width/2, height/2, black)
+
+	for {
+		time.Sleep(time.Hour)
+	}
+
+}

examples/hts221/main.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/hts221"
+)
+
+func main() {
+
+	// use Nano 33 BLE Sense's internal I2C bus
+	machine.I2C1.Configure(machine.I2CConfig{
+		SCL:       machine.SCL1_PIN,
+		SDA:       machine.SDA1_PIN,
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	sensor := hts221.New(machine.I2C1)
+
+	sensor.Configure() // power on and calibrate
+
+	if !sensor.Connected() {
+		println("HTS221 not connected!")
+		return
+	}
+
+	for {
+		h, _ := sensor.ReadHumidity()
+		t, _ := sensor.ReadTemperature()
+		println("h =", float32(h)/100.0, "% / t =", float32(t)/1000.0, "*C")
+		time.Sleep(time.Second)
+	}
+
+}

examples/i2csoft/adt7410/main.go

@@ -0,0 +1,27 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/adt7410"
+	"tinygo.org/x/drivers/i2csoft"
+)
+
+func main() {
+	i2c := i2csoft.New(machine.SCL_PIN, machine.SDA_PIN)
+	i2c.Configure(i2csoft.I2CConfig{
+		Frequency: 400e3,
+	})
+
+	sensor := adt7410.New(i2c)
+	sensor.Configure()
+
+	for {
+		temp := sensor.ReadTempF()
+		fmt.Printf("temperature: %f\r\n", temp)
+		time.Sleep(time.Second)
+	}
+
+}

examples/ili9341/basic/atsamd21.go

@@ -1,30 +0,0 @@
-//go:build atsamd21
-// +build atsamd21
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI0,
-		machine.D0,
-		machine.D1,
-		machine.D2,
-	)
-
-	backlight = machine.D3
-)
-
-func init() {
-	machine.SPI0.Configure(machine.SPIConfig{
-		SCK:       machine.SPI0_SCK_PIN,
-		SDO:       machine.SPI0_SDO_PIN,
-		SDI:       machine.SPI0_SDI_PIN,
-		Frequency: 24000000,
-	})
-}

examples/ili9341/basic/main.go

@@ -2,9 +2,9 @@ package main
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
+	"tinygo.org/x/drivers/examples/ili9341/initdisplay"
 	"tinygo.org/x/drivers/ili9341"
 )
 
@@ -16,16 +16,15 @@ var (
 	green = color.RGBA{0, 255, 0, 255}
 )
 
+var (
+	display *ili9341.Device
+)
+
 func main() {
+	display = initdisplay.InitDisplay()
 
-	backlight.Configure(machine.PinConfig{machine.PinOutput})
-
-	display.Configure(ili9341.Config{})
 	width, height := display.Size()
 
-	display.FillScreen(black)
-	backlight.High()
-
 	display.FillRectangle(0, 0, width/2, height/2, white)
 	display.FillRectangle(width/2, 0, width/2, height/2, red)
 	display.FillRectangle(0, height/2, width/2, height/2, green)

examples/ili9341/basic/pyportal.go

@@ -1,23 +0,0 @@
-//go:build pyportal
-// +build pyportal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewParallel(
-		machine.LCD_DATA0,
-		machine.TFT_WR,
-		machine.TFT_DC,
-		machine.TFT_CS,
-		machine.TFT_RESET,
-		machine.TFT_RD,
-	)
-
-	backlight = machine.TFT_BACKLIGHT
-)

examples/ili9341/basic/wioterminal.go

@@ -1,30 +0,0 @@
-//go:build wioterminal
-// +build wioterminal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI3,
-		machine.LCD_DC,
-		machine.LCD_SS_PIN,
-		machine.LCD_RESET,
-	)
-
-	backlight = machine.LCD_BACKLIGHT
-)
-
-func init() {
-	machine.SPI3.Configure(machine.SPIConfig{
-		SCK:       machine.LCD_SCK_PIN,
-		SDO:       machine.LCD_SDO_PIN,
-		SDI:       machine.LCD_SDI_PIN,
-		Frequency: 40000000,
-	})
-}

examples/ili9341/initdisplay/atsamd21.go

@@ -0,0 +1,38 @@
+//go:build atsamd21
+
+package initdisplay
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+func InitDisplay() *ili9341.Device {
+	machine.SPI0.Configure(machine.SPIConfig{
+		SCK:       machine.SPI0_SCK_PIN,
+		SDO:       machine.SPI0_SDO_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+		Frequency: 24000000,
+	})
+
+	// configure backlight
+	backlight := machine.D3
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display := ili9341.NewSPI(
+		machine.SPI0,
+		machine.D0,
+		machine.D1,
+		machine.D2,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{})
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation270)
+
+	return display
+}

examples/ili9341/initdisplay/feather.go

@@ -0,0 +1,41 @@
+//go:build feather_m0 || feather_m4 || feather_m4_can || feather_nrf52840 || feather_nrf52840_sense || feather_stm32f405 || feather_rp2040
+
+package initdisplay
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+func InitDisplay() *ili9341.Device {
+	machine.D5.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.D6.Configure(machine.PinConfig{Mode: machine.PinOutput})
+
+	machine.SPI0.Configure(machine.SPIConfig{
+		SCK:       machine.SPI0_SCK_PIN,
+		SDO:       machine.SPI0_SDO_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+		Frequency: 40000000,
+	})
+
+	// configure backlight
+	backlight := machine.D9
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display := ili9341.NewSPI(
+		machine.SPI0,
+		machine.D10, // LCD_DC,
+		machine.D11, // LCD_SS_PIN,
+		machine.D12, // LCD_RESET,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{})
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation270)
+
+	return display
+}

examples/ili9341/initdisplay/m5stack.go

@@ -0,0 +1,42 @@
+//go:build m5stack
+
+package initdisplay
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+func InitDisplay() *ili9341.Device {
+	machine.SPI2.Configure(machine.SPIConfig{
+		SCK:       machine.SPI0_SCK_PIN,
+		SDO:       machine.SPI0_SDO_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+		Frequency: 40e6,
+	})
+
+	// configure backlight
+	backlight := machine.LCD_BL_PIN
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display := ili9341.NewSPI(
+		machine.SPI2,
+		machine.LCD_DC_PIN,
+		machine.LCD_SS_PIN,
+		machine.LCD_RST_PIN,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{
+		Width:            320,
+		Height:           240,
+		DisplayInversion: true,
+	})
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation0Mirror)
+
+	return display
+}

examples/ili9341/initdisplay/m5stack_core2.go

@@ -0,0 +1,48 @@
+//go:build m5stack_core2
+
+package initdisplay
+
+import (
+	"image/color"
+	"machine"
+
+	axp192 "tinygo.org/x/drivers/axp192/m5stack-core2-axp192"
+	"tinygo.org/x/drivers/i2csoft"
+	"tinygo.org/x/drivers/ili9341"
+)
+
+// InitDisplay initializes the display of each board.
+func InitDisplay() *ili9341.Device {
+	machine.SPI2.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40e6,
+	})
+
+	i2c := i2csoft.New(machine.SCL0_PIN, machine.SDA0_PIN)
+	i2c.Configure(i2csoft.I2CConfig{Frequency: 100e3})
+
+	axp := axp192.New(i2c)
+	led := axp.LED
+	led.Low()
+
+	display := ili9341.NewSPI(
+		machine.SPI2,
+		machine.LCD_DC_PIN,
+		machine.LCD_SS_PIN,
+		machine.NoPin,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{
+		Width:            320,
+		Height:           240,
+		DisplayInversion: true,
+	})
+	display.FillScreen(color.RGBA{255, 255, 255, 255})
+
+	display.SetRotation(ili9341.Rotation0Mirror)
+
+	return display
+}

examples/ili9341/initdisplay/pyportal.go

@@ -0,0 +1,33 @@
+//go:build pyportal
+
+package initdisplay
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+func InitDisplay() *ili9341.Device {
+	display := ili9341.NewParallel(
+		machine.LCD_DATA0,
+		machine.TFT_WR,
+		machine.TFT_DC,
+		machine.TFT_CS,
+		machine.TFT_RESET,
+		machine.TFT_RD,
+	)
+
+	// configure backlight
+	backlight := machine.TFT_BACKLIGHT
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	// configure display
+	display.Configure(ili9341.Config{})
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation270)
+
+	return display
+}

examples/ili9341/initdisplay/wioterminal.go

@@ -0,0 +1,38 @@
+//go:build wioterminal
+
+package initdisplay
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ili9341"
+)
+
+func InitDisplay() *ili9341.Device {
+	machine.SPI3.Configure(machine.SPIConfig{
+		SCK:       machine.LCD_SCK_PIN,
+		SDO:       machine.LCD_SDO_PIN,
+		SDI:       machine.LCD_SDI_PIN,
+		Frequency: 40000000,
+	})
+
+	// configure backlight
+	backlight := machine.LCD_BACKLIGHT
+	backlight.Configure(machine.PinConfig{machine.PinOutput})
+
+	display := ili9341.NewSPI(
+		machine.SPI3,
+		machine.LCD_DC,
+		machine.LCD_SS_PIN,
+		machine.LCD_RESET,
+	)
+
+	// configure display
+	display.Configure(ili9341.Config{})
+
+	backlight.High()
+
+	display.SetRotation(ili9341.Rotation270)
+
+	return display
+}

examples/ili9341/pyportal_boing/main.go

@@ -3,9 +3,9 @@
 package main
 
 import (
-	"machine"
 	"time"
 
+	"tinygo.org/x/drivers/examples/ili9341/initdisplay"
 	"tinygo.org/x/drivers/examples/ili9341/pyportal_boing/graphics"
 	"tinygo.org/x/drivers/ili9341"
 )
@@ -44,20 +44,17 @@ var (
 	palette [16]uint16
 )
 
+var (
+	display *ili9341.Device
+)
+
 func main() {
+	display = initdisplay.InitDisplay()
 
-	// configure backlight
-	backlight.Configure(machine.PinConfig{machine.PinOutput})
-
-	// configure display
-	display.Configure(ili9341.Config{})
 	print("width, height == ")
 	width, height := display.Size()
 	println(width, height)
 
-	backlight.High()
-
-	display.SetRotation(ili9341.Rotation270)
 	DrawBackground()
 
 	startTime = time.Now().UnixNano()

examples/ili9341/pyportal_boing/pyportal.go

@@ -1,23 +0,0 @@
-//go:build pyportal
-// +build pyportal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewParallel(
-		machine.LCD_DATA0,
-		machine.TFT_WR,
-		machine.TFT_DC,
-		machine.TFT_CS,
-		machine.TFT_RESET,
-		machine.TFT_RD,
-	)
-
-	backlight = machine.TFT_BACKLIGHT
-)

examples/ili9341/pyportal_boing/wioterminal.go

@@ -1,30 +0,0 @@
-//go:build wioterminal
-// +build wioterminal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI3,
-		machine.LCD_DC,
-		machine.LCD_SS_PIN,
-		machine.LCD_RESET,
-	)
-
-	backlight = machine.LCD_BACKLIGHT
-)
-
-func init() {
-	machine.SPI3.Configure(machine.SPIConfig{
-		SCK:       machine.LCD_SCK_PIN,
-		SDO:       machine.LCD_SDO_PIN,
-		SDI:       machine.LCD_SDI_PIN,
-		Frequency: 40000000,
-	})
-}

examples/ili9341/scroll/atsamd21.go

@@ -1,30 +0,0 @@
-//go:build atsamd21
-// +build atsamd21
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI0,
-		machine.D0,
-		machine.D1,
-		machine.D2,
-	)
-
-	backlight = machine.D3
-)
-
-func init() {
-	machine.SPI0.Configure(machine.SPIConfig{
-		SCK:       machine.SPI0_SCK_PIN,
-		SDO:       machine.SPI0_SDO_PIN,
-		SDI:       machine.SPI0_SDI_PIN,
-		Frequency: 24000000,
-	})
-}

examples/ili9341/scroll/main.go

@@ -2,9 +2,9 @@ package main
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
+	"tinygo.org/x/drivers/examples/ili9341/initdisplay"
 	"tinygo.org/x/drivers/ili9341"
 )
 
@@ -16,16 +16,15 @@ var (
 	white = color.RGBA{255, 255, 255, 255}
 )
 
+var (
+	display *ili9341.Device
+)
+
 func main() {
+	display := initdisplay.InitDisplay()
 
-	backlight.Configure(machine.PinConfig{machine.PinOutput})
-
-	display.Configure(ili9341.Config{})
 	width, height := display.Size()
 
-	display.FillScreen(black)
-	backlight.High()
-
 	display.FillRectangle(0, 0, width/2, height/2, white)
 	display.FillRectangle(width/2, 0, width/2, height/2, red)
 	display.FillRectangle(0, height/2, width/2, height/2, green)

examples/ili9341/scroll/pyportal.go

@@ -1,23 +0,0 @@
-//go:build pyportal
-// +build pyportal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewParallel(
-		machine.LCD_DATA0,
-		machine.TFT_WR,
-		machine.TFT_DC,
-		machine.TFT_CS,
-		machine.TFT_RESET,
-		machine.TFT_RD,
-	)
-
-	backlight = machine.TFT_BACKLIGHT
-)

examples/ili9341/scroll/wioterminal.go

@@ -1,30 +0,0 @@
-//go:build wioterminal
-// +build wioterminal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI3,
-		machine.LCD_DC,
-		machine.LCD_SS_PIN,
-		machine.LCD_RESET,
-	)
-
-	backlight = machine.LCD_BACKLIGHT
-)
-
-func init() {
-	machine.SPI3.Configure(machine.SPIConfig{
-		SCK:       machine.LCD_SCK_PIN,
-		SDO:       machine.LCD_SDO_PIN,
-		SDI:       machine.LCD_SDI_PIN,
-		Frequency: 40000000,
-	})
-}

examples/ili9341/slideshow/atsamd21.go

@@ -1,30 +0,0 @@
-//go:build atsamd21
-// +build atsamd21
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI0,
-		machine.D0,
-		machine.D1,
-		machine.D2,
-	)
-
-	backlight = machine.D3
-)
-
-func init() {
-	machine.SPI0.Configure(machine.SPIConfig{
-		SCK:       machine.SPI0_SCK_PIN,
-		SDO:       machine.SPI0_SDO_PIN,
-		SDI:       machine.SPI0_SDI_PIN,
-		Frequency: 24000000,
-	})
-}

examples/ili9341/slideshow/main.go

@@ -3,10 +3,10 @@ package main
 import (
 	"fmt"
 	"image/color"
-	"machine"
 	"strings"
 	"time"
 
+	"tinygo.org/x/drivers/examples/ili9341/initdisplay"
 	"tinygo.org/x/drivers/ili9341"
 	"tinygo.org/x/drivers/image/jpeg"
 	"tinygo.org/x/drivers/image/png"
@@ -20,6 +20,10 @@ var (
 	green = color.RGBA{0, 255, 0, 255}
 )
 
+var (
+	display *ili9341.Device
+)
+
 func main() {
 	err := run()
 	for err != nil {
@@ -28,9 +32,7 @@ func main() {
 }
 
 func run() error {
-	backlight.Configure(machine.PinConfig{machine.PinOutput})
-
-	display.Configure(ili9341.Config{})
+	display = initdisplay.InitDisplay()
 
 	width, height := display.Size()
 	if width < 320 || height < 240 {
@@ -38,7 +40,6 @@ func run() error {
 	}
 
 	display.FillScreen(black)
-	backlight.High()
 
 	for {
 		err := drawJpeg(display)
@@ -71,7 +72,8 @@ func drawPng(display *ili9341.Device) error {
 		}
 	})
 
-	return png.Decode(p)
+	_, err := png.Decode(p)
+	return err
 }
 
 func drawJpeg(display *ili9341.Device) error {
@@ -83,7 +85,8 @@ func drawJpeg(display *ili9341.Device) error {
 		}
 	})
 
-	return jpeg.Decode(p)
+	_, err := jpeg.Decode(p)
+	return err
 }
 
 func errorMessage(err error) {

examples/ili9341/slideshow/pyportal.go

@@ -1,23 +0,0 @@
-//go:build pyportal
-// +build pyportal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewParallel(
-		machine.LCD_DATA0,
-		machine.TFT_WR,
-		machine.TFT_DC,
-		machine.TFT_CS,
-		machine.TFT_RESET,
-		machine.TFT_RD,
-	)
-
-	backlight = machine.TFT_BACKLIGHT
-)

examples/ili9341/slideshow/wioterminal.go

@@ -1,30 +0,0 @@
-//go:build wioterminal
-// +build wioterminal
-
-package main
-
-import (
-	"machine"
-
-	"tinygo.org/x/drivers/ili9341"
-)
-
-var (
-	display = ili9341.NewSPI(
-		machine.SPI3,
-		machine.LCD_DC,
-		machine.LCD_SS_PIN,
-		machine.LCD_RESET,
-	)
-
-	backlight = machine.LCD_BACKLIGHT
-)
-
-func init() {
-	machine.SPI3.Configure(machine.SPIConfig{
-		SCK:       machine.LCD_SCK_PIN,
-		SDO:       machine.LCD_SDO_PIN,
-		SDI:       machine.LCD_SDI_PIN,
-		Frequency: 40000000,
-	})
-}

examples/irremote/main.go

@@ -0,0 +1,58 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/irremote"
+)
+
+var irCmdButtons = map[uint16]string{
+	0x45: "POWER",
+	0x47: "FUNC/STOP",
+	0x46: "VOL+",
+	0x44: "FAST BACK",
+	0x40: "PAUSE",
+	0x43: "FAST FORWARD",
+	0x07: "DOWN",
+	0x15: "VOL-",
+	0x09: "UP",
+	0x19: "EQ",
+	0x0D: "ST/REPT",
+	0x16: "0",
+	0x0C: "1",
+	0x18: "2",
+	0x5E: "3",
+	0x08: "4",
+	0x1C: "5",
+	0x5A: "6",
+	0x42: "7",
+	0x52: "8",
+	0x4A: "9",
+}
+
+var (
+	pinIRIn = machine.GP26
+	ir      irremote.ReceiverDevice
+)
+
+func setupPins() {
+	ir = irremote.NewReceiver(pinIRIn)
+	ir.Configure()
+}
+
+func irCallback(data irremote.Data) {
+	msg := "Command: " + irCmdButtons[data.Command]
+	if data.Flags&irremote.DataFlagIsRepeat != 0 {
+		msg = msg + " (REPEAT)"
+	}
+	println(msg)
+}
+
+func main() {
+	setupPins()
+	ir.SetCommandHandler(irCallback)
+	for {
+		time.Sleep(time.Millisecond * 10)
+	}
+}

examples/is31fl3731/main.go

@@ -0,0 +1,51 @@
+package main
+
+import (
+	"time"
+
+	"machine"
+
+	"tinygo.org/x/drivers/is31fl3731"
+)
+
+// I2CAddress -- address of led matrix
+var I2CAddress uint8 = is31fl3731.I2C_ADDRESS_74
+
+func main() {
+	bus := machine.I2C0
+	err := bus.Configure(machine.I2CConfig{})
+	if err != nil {
+		println("could not configure I2C:", err)
+		return
+	}
+
+	// Create driver for Adafruit 15x7 CharliePlex LED Matrix FeatherWing
+	// (CharlieWing): https://www.adafruit.com/product/3163
+	ledMatrix := is31fl3731.NewAdafruitCharlieWing15x7(bus, I2CAddress)
+
+	err = ledMatrix.Configure()
+	if err != nil {
+		println("could not configure is31fl3731 driver:", err)
+		return
+	}
+
+	// Fill the whole matrix on the frame #0 (visible by default)
+	ledMatrix.Fill(is31fl3731.FRAME_0, uint8(3))
+
+	// Draw couple pixels on the frame #1 (not visible yet)
+	ledMatrix.DrawPixelXY(is31fl3731.FRAME_1, uint8(0), uint8(0), uint8(10))
+	ledMatrix.DrawPixelXY(is31fl3731.FRAME_1, uint8(14), uint8(6), uint8(10))
+
+	// There are 8 frames available, it's a good idea to draw on an invisible
+	// frame and then switch to that frame to reduce flickering. Switch between
+	// frame #0 and #1 in a loop to show animation:
+	for {
+		println("show frame #0...")
+		ledMatrix.SetActiveFrame(is31fl3731.FRAME_0)
+		time.Sleep(time.Second * 3)
+
+		println("show frame #1...")
+		ledMatrix.SetActiveFrame(is31fl3731.FRAME_1)
+		time.Sleep(time.Second * 3)
+	}
+}

examples/l3gd20/main.go

@@ -0,0 +1,39 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/l3gd20"
+)
+
+func main() {
+	const (
+		// Default address on most breakout boards.
+		pcaAddr = 0x40
+	)
+
+	bus := machine.I2C0
+
+	err := bus.Configure(machine.I2CConfig{})
+	if err != nil {
+		panic(err.Error())
+	}
+
+	gyro := l3gd20.NewI2C(bus, 105)
+	err = gyro.Configure(l3gd20.Config{Range: l3gd20.Range_250})
+	if err != nil {
+		println(err.Error())
+	}
+
+	var x, y, z int32
+	for {
+		err = gyro.Update()
+		if err != nil {
+			println(err.Error())
+		}
+		x, y, z = gyro.AngularVelocity()
+		println(x, y, z)
+		time.Sleep(500 * time.Millisecond)
+	}
+}

examples/lora/lorawan/atcmd/README.md

@@ -0,0 +1,41 @@
+# AT-CMD implementation of at-lora command set
+
+This example implements the AT command set as used by Seeed in the LoRa-E5 series of boards, but in the form of a TinyGo program that provides a serial interface. 
+
+See https://files.seeedstudio.com/products/317990687/res/LoRa-E5%20AT%20Command%20Specification_V1.0%20.pdf for more information.
+
+```
+$ tinygo monitor
+Connected to /dev/ttyACM0. Press Ctrl-C to exit.
++AT: OK
++VER: 0.0.1 (sx127x v18)
+```
+
+# Building
+
+Run the following commands from the main `drivers` directory.
+
+## Simulator
+
+Builds/flashes atcmd console application with simulator instead of actual LoRa radio.
+
+```
+tinygo flash -target pico ./examples/lora/lorawan/atcmd/
+```
+
+## PyBadge with LoRa Featherwing 
+
+Builds/flashes atcmd console application on PyBadge using LoRa Featherwing (RFM95/SX1276).
+
+```
+tinygo flash -target pybadge -tags featherwing ./examples/lora/lorawan/atcmd/
+```
+
+## LoRa-E5 
+
+Builds/flashes atcmd console application on Lora-E5 using onboard SX126x.
+
+```
+tinygo flash -target lorae5 ./examples/lora/lorawan/atcmd/
+```
+

examples/lora/lorawan/atcmd/commands.go

@@ -0,0 +1,485 @@
+package main
+
+import (
+	"encoding/hex"
+	"strings"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora/lorawan"
+)
+
+// Use to test if connection to module is OK.
+func quicktest() {
+	writeCommandOutput("AT", "OK")
+}
+
+// Check firmware version.
+func version() {
+	writeCommandOutput("VER", common.CurrentVersion()+" ("+common.FirmwareVersion()+")")
+}
+
+// Use to check the ID of the LoRaWAN module, or change the ID.
+func id(args string) error {
+	cmd := "ID"
+
+	// look for comma in args
+	param, val, hasComma := strings.Cut(args, ",")
+	if hasComma {
+		// set
+		data := strings.Trim(val, "\"'")
+
+		// convert data from hex formatted string
+		data = strings.ReplaceAll(data, " ", "")
+		hexdata, err := hex.DecodeString(data)
+		if err != nil {
+			writeCommandOutput(cmd, err.Error())
+
+			return err
+		}
+
+		switch param {
+		case "DevAddr":
+			if err := session.SetDevAddr(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+		case "DevEui":
+			if err := otaa.SetDevEUI(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+		case "AppEui":
+			if err := otaa.SetAppEUI(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+		default:
+			return errInvalidCommand
+		}
+
+		return nil
+	}
+
+	// get
+	switch param {
+	case "DevAddr":
+		writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+	case "DevEui":
+		writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+	case "AppEui":
+		writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	default:
+		writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+		writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+		writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	}
+
+	return nil
+}
+
+// Use to reset the module. If module returns error, then reset function is invalid.
+func reset() error {
+	radio.Reset()
+
+	writeCommandOutput("RESET", "OK")
+	return nil
+}
+
+// Use to send string format frame which is no need to be confirmed by the server.
+func msg(data string) error {
+	cmd := "MSG"
+	writeCommandOutput(cmd, "Start")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send string format frame which must be confirmed by the server
+func cmsg(data string) error {
+	cmd := "CMSG"
+	writeCommandOutput(cmd, "Start")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	// TODO: confirmation
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format frame which is no need to be confirmed by the server
+func msghex(data string) error {
+	cmd := "MSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format frame which must be confirmed by the server.
+func cmsghex(data string) error {
+	cmd := "CMSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send string format LoRaWAN proprietary frames
+func pmsg(data string) error {
+	cmd := "PMSG"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+// Use to send hex format LoRaWAN proprietary frames.
+func pmsghex(data string) error {
+	cmd := "PMSGHEX"
+	writeCommandOutput(cmd, "Start")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+// Set PORT number which will be used by MSG/CMSG/MSGHEX/CMSGHEX command to send
+// message, port number should range from 1 to 255. User should refer to LoRaWAN
+// specification to choose port.
+func port(p string) error {
+	cmd := "PMSG"
+	writeCommandOutput(cmd, p)
+
+	return nil
+}
+
+// Set ADR function of LoRaWAN module
+func adr(state string) error {
+	cmd := "ADR"
+	writeCommandOutput(cmd, state)
+
+	return nil
+}
+
+// Use LoRaWAN defined DRx to set datarate of LoRaWAN AT modem.
+func dr(rate string) error {
+	cmd := "DR"
+	writeCommandOutput(cmd, rate)
+
+	return nil
+}
+
+// Channel Configuration
+func ch(channel string) error {
+	cmd := "CH"
+	writeCommandOutput(cmd, channel)
+
+	return nil
+}
+
+// Set and Check Power
+func power(setting string) error {
+	cmd := "POWER"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+// Unconfirmed message repeats times.
+func rept(setting string) error {
+	cmd := "REPT"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+// Confirmed message retry times. Valid range 0~254,
+// if retry times is less than 2, only one message will
+// be sent. Random delay 3 - 10s between each retry
+// (band duty cycle limitation has the priority)
+func retry(setting string) error {
+	cmd := "RETRY"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func rxwin2(setting string) error {
+	cmd := "RXWIN2"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func rxwin1(setting string) error {
+	cmd := "RXWIN1"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func key(setting string) error {
+	cmd := "KEY"
+
+	// look for comma in args
+	param, val, hasComma := strings.Cut(setting, ",")
+	if hasComma {
+		// set
+		data := strings.Trim(val, "\"'")
+
+		// convert data from hex formatted string
+		data = strings.ReplaceAll(data, " ", "")
+		hexdata, err := hex.DecodeString(data)
+		if err != nil {
+			writeCommandOutput(cmd, err.Error())
+
+			return err
+		}
+
+		switch param {
+		case "APPKEY":
+			if err := otaa.SetAppKey(hexdata); err != nil {
+				writeCommandOutput(cmd, err.Error())
+
+				return err
+			}
+
+			writeCommandOutput(cmd, "APPKEY, "+otaa.GetAppKey())
+		default:
+			return errInvalidCommand
+		}
+	}
+
+	// cannot get keys
+	return errInvalidCommand
+}
+
+func fdefault(setting string) error {
+	cmd := "FDEFAULT"
+	writeCommandOutput(cmd, "OK")
+
+	return nil
+}
+
+func mode(setting string) error {
+	cmd := "MODE"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func join(setting string) error {
+	// TODO: check that DevEUI, AppEUI, and AppKey have values
+
+	cmd := "JOIN"
+	writeCommandOutput(cmd, "Starting")
+	if err := lorawan.Join(otaa, session); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Network joined")
+	writeCommandOutput(cmd, "DevEui, "+otaa.GetDevEUI())
+	writeCommandOutput(cmd, "AppEui, "+otaa.GetAppEUI())
+	writeCommandOutput(cmd, "DevAddr, "+session.GetDevAddr())
+	writeCommandOutput(cmd, "NetID, "+otaa.GetNetID())
+	writeCommandOutput(cmd, "NwkSKey, "+session.GetNwkSKey())
+	writeCommandOutput(cmd, "AppSKey, "+session.GetAppSKey())
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func beacon(setting string) error {
+	cmd := "BEACON"
+	writeCommandOutput(cmd, "Starting")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+func class(setting string) error {
+	cmd := "CLASS"
+	writeCommandOutput(cmd, "Starting")
+
+	writeCommandOutput(cmd, "Done")
+
+	return nil
+}
+
+func delay(setting string) error {
+	cmd := "DELAY"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func lw(setting string) error {
+	cmd := "LW"
+	writeCommandOutput(cmd, setting)
+
+	return nil
+}
+
+func wdt(setting string) error {
+	cmd := "WDT"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func lowpower(setting string) error {
+	cmd := "LOWPOWER"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func vdd(setting string) error {
+	cmd := "VDD"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func temp(setting string) error {
+	cmd := "TEMP"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func rtc(setting string) error {
+	cmd := "RTC"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func eeprom(setting string) error {
+	cmd := "EEPROM"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func uartcmd(setting string) error {
+	cmd := "UART"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func test(setting string) error {
+	cmd := "TEST"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func log(setting string) error {
+	cmd := "LOG"
+	writeCommandOutput(cmd, "Not implemented")
+
+	return nil
+}
+
+func send(data string) error {
+	cmd := "SEND"
+	writeCommandOutput(cmd, "Start")
+
+	// remove leading/trailing quotes
+	data = strings.Trim(data, "\"'")
+
+	if err := radio.Tx([]byte(data), defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func sendhex(data string) error {
+	cmd := "SENDHEX"
+	writeCommandOutput(cmd, "Start")
+
+	// remove leading/trailing quotes
+	data = strings.Trim(data, "\"'")
+
+	// convert data from hex formatted string
+	data = strings.ReplaceAll(data, " ", "")
+	payload, err := hex.DecodeString(data)
+	if err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	if err := radio.Tx(payload, defaultTimeout); err != nil {
+		writeCommandOutput(cmd, err.Error())
+
+		return err
+	}
+
+	writeCommandOutput(cmd, "Done")
+	return nil
+}
+
+func recv(setting string) error {
+	cmd := "RECV"
+
+	data, err := common.Lorarx()
+	if err != nil {
+		writeCommandOutput(cmd, "ERROR "+err.Error())
+		return err
+	}
+	writeCommandOutput(cmd, string(data))
+
+	return nil
+}
+
+func recvhex(setting string) error {
+	cmd := "RECVHEX"
+
+	data, err := common.Lorarx()
+	if err != nil {
+		writeCommandOutput(cmd, "ERROR "+err.Error())
+		return err
+	}
+	writeCommandOutput(cmd, string(data))
+
+	return nil
+}
+
+func crlf() {
+	uart.Write([]byte("\r\n"))
+}
+
+func writeCommandOutput(cmd, data string) {
+	uart.Write([]byte("+" + cmd + ": "))
+	uart.Write([]byte(data))
+	crlf()
+}

examples/lora/lorawan/atcmd/main.go

@@ -0,0 +1,76 @@
+// AT command set console running on the device UART to communicate with
+// an attached LoRa device.
+//
+// Computer <-> UART <-> MCU <-> SPI <-> SX126x/SX127x
+//
+// Connect using default baudrate for this hardware, 8-N-1 with your terminal program.
+// For details on the AT command set, see:
+// https://files.seeedstudio.com/products/317990687/res/LoRa-E5%20AT%20Command%20Specification_V1.0%20.pdf
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/lora/lorawan"
+)
+
+// change these to test a different UART or pins if available
+var (
+	uart  = machine.Serial
+	tx    = machine.UART_TX_PIN
+	rx    = machine.UART_RX_PIN
+	input = make([]byte, 0, 64)
+
+	radio   lora.Radio
+	session *lorawan.Session
+	otaa    *lorawan.Otaa
+
+	defaultTimeout uint32 = 1000
+)
+
+func main() {
+	uart.Configure(machine.UARTConfig{TX: tx, RX: rx})
+
+	var err error
+	radio, err = common.SetupLora()
+	if err != nil {
+		fail(err.Error())
+	}
+
+	session = &lorawan.Session{}
+	otaa = &lorawan.Otaa{}
+	lorawan.UseRadio(radio)
+
+	for {
+		if uart.Buffered() > 0 {
+			data, _ := uart.ReadByte()
+
+			switch data {
+			case 13:
+				// return key
+				if err := parse(input); err != nil {
+					uart.Write([]byte("ERROR: "))
+					uart.Write([]byte(err.Error()))
+					crlf()
+				}
+				input = input[:0]
+			default:
+				// just capture the character
+				input = append(input, data)
+			}
+		}
+		time.Sleep(10 * time.Millisecond)
+	}
+}
+
+func fail(msg string) {
+	for {
+		uart.Write([]byte(msg))
+		crlf()
+
+		time.Sleep(time.Minute)
+	}
+}

examples/lora/lorawan/atcmd/parser.go

@@ -0,0 +1,115 @@
+package main
+
+import (
+	"errors"
+	"strings"
+)
+
+var (
+	errInvalidCommand = errors.New("Invalid command")
+)
+
+func parse(data []byte) error {
+	switch {
+	case len(data) < 2, string(data[0:2]) != "AT":
+		return errInvalidCommand
+	case len(data) == 2:
+		// just the AT command by itself
+		quicktest()
+	case len(data) < 6 || data[2] != '+':
+		return errInvalidCommand
+	default:
+		// parse the rest of the command
+		cmd, args, _ := strings.Cut(string(data[3:]), "=")
+		return parseCommand(cmd, args)
+	}
+
+	return nil
+}
+
+func parseCommand(cmd, args string) error {
+	switch cmd {
+	case "VER":
+		version()
+	case "ID":
+		id(args)
+	case "RESET":
+		reset()
+	case "MSG":
+		msg(args)
+	case "CMSG":
+		cmsg(args)
+	case "MSGHEX":
+		msghex(args)
+	case "CMSGHEX":
+		cmsghex(args)
+	case "PMSG":
+		pmsg(args)
+	case "PMSGHEX":
+		pmsg(args)
+	case "PORT":
+		port(args)
+	case "ADR":
+		adr(args)
+	case "DR":
+		dr(args)
+	case "CH":
+		ch(args)
+	case "POWER":
+		power(args)
+	case "REPT":
+		rept(args)
+	case "RETRY":
+		retry(args)
+	case "RXWIN2":
+		rxwin2(args)
+	case "RXWIN1":
+		rxwin1(args)
+	case "KEY":
+		key(args)
+	case "FDEFAULT":
+		fdefault(args)
+	case "MODE":
+		mode(args)
+	case "JOIN":
+		join(args)
+	case "BEACON":
+		join(args)
+	case "CLASS":
+		class(args)
+	case "DELAY":
+		delay(args)
+	case "LW":
+		lw(args)
+	case "WDT":
+		wdt(args)
+	case "LOWPOWER":
+		lowpower(args)
+	case "VDD":
+		vdd(args)
+	case "TEMP":
+		temp(args)
+	case "RTC":
+		rtc(args)
+	case "EEPROM":
+		eeprom(args)
+	case "UART":
+		uartcmd(args)
+	case "TEST":
+		test(args)
+	case "LOG":
+		log(args)
+	case "RECV":
+		recv(args)
+	case "RECVHEX":
+		recvhex(args)
+	case "SEND":
+		send(args)
+	case "SENDHEX":
+		sendhex(args)
+	default:
+		return errInvalidCommand
+	}
+
+	return nil
+}

examples/lora/lorawan/basic-demo/README.md

@@ -0,0 +1,35 @@
+# Simple Lorawan example
+
+This demo code will connect Lorawan network and send sample uplink message
+
+You may change your Lorawan keys (AppEUI, DevEUI, AppKEY) in key-default.go
+
+
+```
+$ tinygo monitor
+Connected to /dev/ttyACM0. Press Ctrl-C to exit.
+Lorawan Simple Demo
+Start Lorawan Join sequence
+loraConnect: Connected !
+```
+
+# Building
+
+## Simulator
+
+```
+tinygo flash -target pico ./examples/lora/lorawan/basic-demo
+```
+
+## PyBadge with LoRa Featherwing 
+
+```
+tinygo flash -target pybadge -tags featherwing ./examples/lora/lorawan/basic-demo
+```
+
+## LoRa-E5 
+
+```
+tinygo flash -target lorae5 ./examples/lora/lorawan/basic-demo
+```
+

examples/lora/lorawan/basic-demo/keys-default.go

@@ -0,0 +1,11 @@
+//go:build !customkeys
+
+package main
+
+// These are sample keys, so the example builds
+// Either change here, or create a new go file and use customkeys build tag
+func setLorawanKeys() {
+	otaa.SetAppEUI([]uint8{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00})
+	otaa.SetDevEUI([]uint8{0xB3, 0xD5, 0x41, 0x00, 0x0A, 0xF1, 0xA4, 0x45})
+	otaa.SetAppKey([]uint8{0x12, 0x22, 0xA3, 0xFF, 0x0C, 0x7B, 0x76, 0x7B, 0x8F, 0xD3, 0x12, 0x4F, 0xCE, 0x7A, 0x32, 0x16})
+}

examples/lora/lorawan/basic-demo/main.go

@@ -0,0 +1,107 @@
+// Simple code for connecting to Lorawan network and uploading sample payload
+package main
+
+import (
+	"errors"
+	"strconv"
+	"time"
+
+	"tinygo.org/x/drivers/examples/lora/lorawan/common"
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/lora/lorawan"
+)
+
+const (
+	LORAWAN_JOIN_TIMEOUT_SEC    = 180
+	LORAWAN_RECONNECT_DELAY_SEC = 15
+	LORAWAN_UPLINK_DELAY_SEC    = 60
+)
+
+var (
+	radio   lora.Radio
+	session *lorawan.Session
+	otaa    *lorawan.Otaa
+)
+
+func loraConnect() error {
+	start := time.Now()
+	var err error
+	for time.Since(start) < LORAWAN_JOIN_TIMEOUT_SEC*time.Second {
+		println("Trying to join network")
+		err = lorawan.Join(otaa, session)
+		if err == nil {
+			println("Connected to network !")
+			return nil
+		}
+		println("Join error:", err, "retrying in", LORAWAN_RECONNECT_DELAY_SEC, "sec")
+		time.Sleep(time.Second * LORAWAN_RECONNECT_DELAY_SEC)
+	}
+
+	err = errors.New("Unable to join Lorawan network")
+	println(err.Error())
+	return err
+}
+
+func failMessage(err error) {
+	println("FATAL:", err)
+	for {
+	}
+}
+
+func main() {
+	println("*** Lorawan basic join and uplink demo ***")
+
+	// Board specific Lorawan initialization
+	var err error
+	radio, err = common.SetupLora()
+	if err != nil {
+		failMessage(err)
+	}
+
+	// Required for LoraWan operations
+	session = &lorawan.Session{}
+	otaa = &lorawan.Otaa{}
+
+	// Initial Lora modulation configuration
+	loraConf := lora.Config{
+		Freq:           868100000,
+		Bw:             lora.Bandwidth_125_0,
+		Sf:             lora.SpreadingFactor9,
+		Cr:             lora.CodingRate4_7,
+		HeaderType:     lora.HeaderExplicit,
+		Preamble:       12,
+		Ldr:            lora.LowDataRateOptimizeOff,
+		Iq:             lora.IQStandard,
+		Crc:            lora.CRCOn,
+		SyncWord:       lora.SyncPublic,
+		LoraTxPowerDBm: 20,
+	}
+	radio.LoraConfig(loraConf)
+
+	// Connect the lorawan with the Lora Radio device.
+	lorawan.UseRadio(radio)
+
+	// Configure AppEUI, DevEUI, APPKey
+	setLorawanKeys()
+
+	// Try to connect Lorawan network
+	if err := loraConnect(); err != nil {
+		failMessage(err)
+	}
+
+	// Try to periodicaly send an uplink sample message
+	upCount := 1
+	for {
+		payload := "Hello TinyGo #" + strconv.Itoa(upCount)
+
+		if err := lorawan.SendUplink([]byte(payload), session); err != nil {
+			println("Uplink error:", err)
+		} else {
+			println("Uplink success, msg=", payload)
+		}
+
+		println("Sleeping for", LORAWAN_UPLINK_DELAY_SEC, "sec")
+		time.Sleep(time.Second * LORAWAN_UPLINK_DELAY_SEC)
+		upCount++
+	}
+}

examples/lora/lorawan/common/radio.go

@@ -0,0 +1,10 @@
+package common
+
+import (
+	"errors"
+)
+
+var (
+	errRadioNotFound = errors.New("radio not found")
+	errRxTimeout     = errors.New("radio RX timeout")
+)

examples/lora/lorawan/common/sim.go

@@ -0,0 +1,40 @@
+//go:build !featherwing && !stm32wlx && !sx126x
+
+package common
+
+import "tinygo.org/x/drivers/lora"
+
+// do simulator setup here
+func SetupLora() (lora.Radio, error) {
+	return &SimLoraRadio{}, nil
+}
+
+type SimLoraRadio struct {
+}
+
+func (sr *SimLoraRadio) Reset() {
+}
+
+func (sr *SimLoraRadio) Tx(pkt []uint8, timeoutMs uint32) error {
+	return nil
+}
+
+func (sr *SimLoraRadio) Rx(timeoutMs uint32) ([]uint8, error) {
+	return nil, nil
+}
+
+func (sr *SimLoraRadio) SetFrequency(freq uint32)    {}
+func (sr *SimLoraRadio) SetIqMode(mode uint8)        {}
+func (sr *SimLoraRadio) SetCodingRate(cr uint8)      {}
+func (sr *SimLoraRadio) SetBandwidth(bw uint8)       {}
+func (sr *SimLoraRadio) SetCrc(enable bool)          {}
+func (sr *SimLoraRadio) SetSpreadingFactor(sf uint8) {}
+func (sr *SimLoraRadio) LoraConfig(cnf lora.Config)  {}
+
+func FirmwareVersion() string {
+	return "simulator " + CurrentVersion()
+}
+
+func Lorarx() ([]byte, error) {
+	return nil, nil
+}

examples/lora/lorawan/common/stm32wlx.go

@@ -0,0 +1,65 @@
+//go:build stm32wlx
+
+package common
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/sx126x"
+)
+
+const (
+	FREQ                      = 868100000
+	LORA_DEFAULT_RXTIMEOUT_MS = 1000
+	LORA_DEFAULT_TXTIMEOUT_MS = 5000
+)
+
+var (
+	loraRadio *sx126x.Device
+)
+
+var spi = machine.SPI3
+
+func newRadioControl() sx126x.RadioController {
+	return sx126x.NewRadioControl()
+}
+
+// do sx126x setup here
+func SetupLora() (lora.Radio, error) {
+	loraRadio = sx126x.New(spi)
+	loraRadio.SetDeviceType(sx126x.DEVICE_TYPE_SX1262)
+
+	// Create radio controller for target
+	loraRadio.SetRadioController(newRadioControl())
+
+	if state := loraRadio.DetectDevice(); !state {
+		return nil, errRadioNotFound
+	}
+
+	loraConf := lora.Config{
+		Freq:           FREQ,
+		Bw:             lora.Bandwidth_500_0,
+		Sf:             lora.SpreadingFactor9,
+		Cr:             lora.CodingRate4_7,
+		HeaderType:     lora.HeaderExplicit,
+		Preamble:       12,
+		Ldr:            lora.LowDataRateOptimizeOff,
+		Iq:             lora.IQStandard,
+		Crc:            lora.CRCOn,
+		SyncWord:       lora.SyncPrivate,
+		LoraTxPowerDBm: 20,
+	}
+
+	loraRadio.LoraConfig(loraConf)
+
+	return loraRadio, nil
+}
+
+func FirmwareVersion() string {
+	return "sx126x"
+}
+
+func Lorarx() ([]byte, error) {
+	return loraRadio.Rx(LORA_DEFAULT_RXTIMEOUT_MS)
+}

examples/lora/lorawan/common/sx126x.go

@@ -0,0 +1,69 @@
+//go:build !stm32wlx && sx126x
+
+package common
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/sx126x"
+)
+
+const (
+	FREQ                      = 868100000
+	LORA_DEFAULT_RXTIMEOUT_MS = 1000
+	LORA_DEFAULT_TXTIMEOUT_MS = 5000
+)
+
+var (
+	loraRadio *sx126x.Device
+)
+
+var (
+	spi                        = machine.SPI0
+	nssPin, busyPin, dio1Pin   = machine.GP17, machine.GP10, machine.GP11
+	rxPin, txLowPin, txHighPin = machine.GP13, machine.GP12, machine.GP12
+)
+
+func newRadioControl() sx126x.RadioController {
+	return sx126x.NewRadioControl(nssPin, busyPin, dio1Pin, rxPin, txLowPin, txHighPin)
+}
+
+// do sx126x setup here
+func SetupLora() (lora.Radio, error) {
+	loraRadio = sx126x.New(spi)
+	loraRadio.SetDeviceType(sx126x.DEVICE_TYPE_SX1262)
+
+	// Create radio controller for target
+	loraRadio.SetRadioController(newRadioControl())
+
+	if state := loraRadio.DetectDevice(); !state {
+		return nil, errRadioNotFound
+	}
+
+	loraConf := lora.Config{
+		Freq:           FREQ,
+		Bw:             lora.Bandwidth_500_0,
+		Sf:             lora.SpreadingFactor9,
+		Cr:             lora.CodingRate4_7,
+		HeaderType:     lora.HeaderExplicit,
+		Preamble:       12,
+		Ldr:            lora.LowDataRateOptimizeOff,
+		Iq:             lora.IQStandard,
+		Crc:            lora.CRCOn,
+		SyncWord:       lora.SyncPrivate,
+		LoraTxPowerDBm: 20,
+	}
+
+	loraRadio.LoraConfig(loraConf)
+
+	return loraRadio, nil
+}
+
+func FirmwareVersion() string {
+	return "sx126x"
+}
+
+func Lorarx() ([]byte, error) {
+	return loraRadio.Rx(LORA_DEFAULT_RXTIMEOUT_MS)
+}

examples/lora/lorawan/common/sx127x.go

@@ -0,0 +1,85 @@
+//go:build featherwing
+
+package common
+
+import (
+	"strconv"
+
+	"machine"
+
+	"tinygo.org/x/drivers/lora"
+	"tinygo.org/x/drivers/sx127x"
+)
+
+const (
+	FREQ                      = 868100000
+	LORA_DEFAULT_RXTIMEOUT_MS = 1000
+	LORA_DEFAULT_TXTIMEOUT_MS = 5000
+)
+
+var (
+	// We assume LoRa Featherwing module is connected to PyBadge:
+	rstPin    = machine.D11
+	csPin     = machine.D10
+	dio0Pin   = machine.D6
+	dio1Pin   = machine.D9
+	spi       = machine.SPI0
+	loraRadio *sx127x.Device
+)
+
+// do sx127x setup here
+func SetupLora() (lora.Radio, error) {
+	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	dio0Pin.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	dio1Pin.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	spi.Configure(machine.SPIConfig{Frequency: 500000, Mode: 0})
+
+	loraRadio = sx127x.New(spi, csPin, rstPin)
+	loraRadio.Reset()
+
+	if state := loraRadio.DetectDevice(); !state {
+		return nil, errRadioNotFound
+	}
+
+	// Setup DIO0 interrupt Handling
+	if err := dio0Pin.SetInterrupt(machine.PinRising, dioIrqHandler); err != nil {
+		println("could not configure DIO0 pin interrupt:", err.Error())
+	}
+
+	// Setup DIO1 interrupt Handling
+	if err := dio1Pin.SetInterrupt(machine.PinRising, dioIrqHandler); err != nil {
+		println("could not configure DIO1 pin interrupt:", err.Error())
+	}
+
+	// Prepare for Lora Operation
+	loraConf := lora.Config{
+		Freq:           FREQ,
+		Bw:             lora.Bandwidth_125_0,
+		Sf:             lora.SpreadingFactor9,
+		Cr:             lora.CodingRate4_7,
+		HeaderType:     lora.HeaderExplicit,
+		Preamble:       12,
+		Iq:             lora.IQStandard,
+		Crc:            lora.CRCOn,
+		SyncWord:       lora.SyncPublic,
+		LoraTxPowerDBm: 20,
+	}
+
+	loraRadio.LoraConfig(loraConf)
+
+	return loraRadio, nil
+}
+
+func dioIrqHandler(machine.Pin) {
+	loraRadio.HandleInterrupt()
+}
+
+func FirmwareVersion() string {
+	v := loraRadio.GetVersion()
+	return "sx127x v" + strconv.Itoa(int(v))
+}
+
+func Lorarx() ([]byte, error) {
+	return loraRadio.Rx(LORA_DEFAULT_RXTIMEOUT_MS)
+}

examples/lora/lorawan/common/version.go

@@ -0,0 +1,7 @@
+package common
+
+const VERSION = "0.0.1"
+
+func CurrentVersion() string {
+	return VERSION
+}

examples/lps22hb/main.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/lps22hb"
+)
+
+func main() {
+
+	// use Nano 33 BLE Sense's internal I2C bus
+	machine.I2C1.Configure(machine.I2CConfig{
+		SCL:       machine.SCL1_PIN,
+		SDA:       machine.SDA1_PIN,
+		Frequency: machine.TWI_FREQ_400KHZ,
+	})
+
+	sensor := lps22hb.New(machine.I2C1)
+	sensor.Configure()
+
+	if !sensor.Connected() {
+		println("LPS22HB not connected!")
+		return
+	}
+
+	for {
+		p, _ := sensor.ReadPressure()
+		t, _ := sensor.ReadTemperature()
+		println("p =", float32(p)/1000.0, "hPa / t =", float32(t)/1000.0, "*C")
+		time.Sleep(time.Second)
+		// note: the device would power down itself after each query
+	}
+
+}

examples/lsm303agr/main.go

@@ -3,37 +3,62 @@ package main
 import (
 	"machine"
 	"time"
+
 	"tinygo.org/x/drivers/lsm303agr"
 )
 
 func main() {
 
+	// LSM303AGR/MAG is connected to the I2C0 bus on micro:bit v1 (the same as P19/P20) and v2 (internal)
 	machine.I2C0.Configure(machine.I2CConfig{})
-	accel_mag := lsm303agr.New(machine.I2C0)
 
-	if !accel_mag.Connected() {
-		println("LSM303AGR/MAG not connected!")
-		return
+	sensor := lsm303agr.New(machine.I2C0)
+	err := sensor.Configure(lsm303agr.Configuration{}) //default settings
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
 	}
 
-	accel_mag.Configure(lsm303agr.Configuration{}) //default settings
+	// you can specify the following options to adjust accuracy, sensor range or save power.
+	// see https://github.com/tinygo-org/drivers/blob/release/lsm303agr/registers.go for details:
+	/*
+		sensor.Configure(lsm303agr.Configuration{
+			AccelPowerMode: lsm303agr.ACCEL_POWER_NORMAL,
+			AccelRange:     lsm303agr.ACCEL_RANGE_2G,
+			AccelDataRate:  lsm303agr.ACCEL_DATARATE_100HZ,
+			MagPowerMode:   lsm303agr.MAG_POWER_NORMAL,
+			MagSystemMode:  lsm303agr.MAG_SYSTEM_CONTINUOUS,
+			MagDataRate:    lsm303agr.MAG_DATARATE_10HZ,
+		})
+	*/
 
 	for {
 
-		accel_x, accel_y, accel_z := accel_mag.ReadAcceleration()
-		pitch, roll := accel_mag.ReadPitchRoll()
-		mag_x, mag_y, mag_z := accel_mag.ReadMagneticField()
-		heading := accel_mag.ReadCompass()
-		temp, _ := accel_mag.ReadTemperature()
+		if !sensor.Connected() {
+			println("LSM303AGR/MAG not connected!")
+			time.Sleep(time.Second)
+			continue
+		}
+
+		// accel_x, accel_y, accel_z := sensor.ReadAcceleration()
+		// println("ACCEL_X:", accel_x/100000, " ACCEL_Y:", accel_y/100000, " ACCEL_Z:", accel_z/100000)
+
+		// mag_x, mag_y, mag_z := sensor.ReadMagneticField()
+		// println("MAG_X:", mag_x/100000, " MAG_Y:", mag_y/100000, " MAG_Z:", mag_z/100000)
+
+		pitch, roll, _ := sensor.ReadPitchRoll()
+		println("Pitch:", float32(pitch)/100000, " Roll:", float32(roll)/100000)
+
+		heading, _ := sensor.ReadCompass()
+		println("Heading:", float32(heading)/100000, "degrees")
+
+		temp, _ := sensor.ReadTemperature()
+		println("Temperature:", float32(temp)/1000, "*C")
 
-		println("ACCEL_X:", accel_x, " ACCEL_Y:", accel_y, " ACCEL_Z:", accel_z)
-		println("MAG_X:", mag_x, " MAG_Y:", mag_y, " MAG_Z:", mag_z)
-		println("Pitch:", pitch, " Roll:", roll)
-		println("Heading:", heading)
-		println("Temperature:", temp/1000)
 		println("\n")
-
-		time.Sleep(time.Millisecond * 100)
+		time.Sleep(time.Millisecond * 250)
 	}
 
 }

examples/lsm6ds3/main.go

@@ -12,16 +12,23 @@ func main() {
 	machine.I2C0.Configure(machine.I2CConfig{})
 
 	accel := lsm6ds3.New(machine.I2C0)
-	accel.Configure(lsm6ds3.Configuration{})
-	if !accel.Connected() {
-		println("LSM6DS3 not connected")
-		return
+	err := accel.Configure(lsm6ds3.Configuration{})
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
 	}
 
 	for {
-		x, y, z := accel.ReadAcceleration()
+		if !accel.Connected() {
+			println("LSM6DS3 not connected")
+			time.Sleep(time.Second)
+			continue
+		}
+		x, y, z, _ := accel.ReadAcceleration()
 		println("Acceleration:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
-		x, y, z = accel.ReadRotation()
+		x, y, z, _ = accel.ReadRotation()
 		println("Gyroscope:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
 		x, _ = accel.ReadTemperature()
 		println("Degrees C", float32(x)/1000, "\n\n")

examples/lsm6ds3tr/main.go

@@ -0,0 +1,37 @@
+// Connects to an LSM6DS3TR I2C a 6 axis Inertial Measurement Unit (IMU)
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/lsm6ds3tr"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	accel := lsm6ds3tr.New(machine.I2C0)
+	err := accel.Configure(lsm6ds3tr.Configuration{})
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
+	}
+
+	for {
+		if !accel.Connected() {
+			println("LSM6DS3TR not connected")
+			time.Sleep(time.Second)
+			continue
+		}
+		x, y, z, _ := accel.ReadAcceleration()
+		println("Acceleration:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
+		x, y, z, _ = accel.ReadRotation()
+		println("Gyroscope:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
+		x, _ = accel.ReadTemperature()
+		println("Degrees C", float32(x)/1000, "\n\n")
+		time.Sleep(time.Millisecond * 1000)
+	}
+}

examples/lsm6dsox/main.go

@@ -26,12 +26,18 @@ func main() {
 	machine.I2C0.Configure(machine.I2CConfig{})
 
 	device := lsm6dsox.New(machine.I2C0)
-	device.Configure(lsm6dsox.Configuration{
+	err := device.Configure(lsm6dsox.Configuration{
 		AccelRange:      lsm6dsox.ACCEL_2G,
 		AccelSampleRate: lsm6dsox.ACCEL_SR_104,
 		GyroRange:       lsm6dsox.GYRO_250DPS,
 		GyroSampleRate:  lsm6dsox.GYRO_SR_104,
 	})
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
+	}
 
 	for {
 
@@ -46,8 +52,8 @@ func main() {
 			calibrateGyro(device)
 		}
 
-		ax, ay, az := device.ReadAcceleration()
-		gx, gy, gz := device.ReadRotation()
+		ax, ay, az, _ := device.ReadAcceleration()
+		gx, gy, gz, _ := device.ReadRotation()
 		t, _ := device.ReadTemperature()
 
 		if PLOTTER {
@@ -64,7 +70,7 @@ func main() {
 
 func calibrateGyro(device *lsm6dsox.Device) {
 	for i := 0; i < 100; i++ {
-		gx, gy, gz := device.ReadRotation()
+		gx, gy, gz, _ := device.ReadRotation()
 		cal[0] += float32(gx) / 1000000
 		cal[1] += float32(gy) / 1000000
 		cal[2] += float32(gz) / 1000000

examples/lsm9ds1/main.go

@@ -0,0 +1,103 @@
+// LSM9DS1, 9 axis Inertial Measurement Unit (IMU)
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/lsm9ds1"
+)
+
+const (
+	PLOTTER             = false
+	SHOW_ACCELERATION   = true
+	SHOW_ROTATION       = true
+	SHOW_MAGNETIC_FIELD = true
+	SHOW_TEMPERATURE    = true
+)
+
+func main() {
+
+	// I2C configure
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	// LSM9DS1 setup
+	device := lsm9ds1.New(machine.I2C0)
+	err := device.Configure(lsm9ds1.Configuration{
+		AccelRange:      lsm9ds1.ACCEL_2G,
+		AccelSampleRate: lsm9ds1.ACCEL_SR_119,
+		GyroRange:       lsm9ds1.GYRO_250DPS,
+		GyroSampleRate:  lsm9ds1.GYRO_SR_119,
+		MagRange:        lsm9ds1.MAG_4G,
+		MagSampleRate:   lsm9ds1.MAG_SR_40,
+	})
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
+	}
+
+	for {
+
+		if !device.Connected() {
+			println("LSM9DS1 not connected")
+			time.Sleep(time.Second)
+			continue
+		}
+
+		ax, ay, az, _ := device.ReadAcceleration()
+		gx, gy, gz, _ := device.ReadRotation()
+		mx, my, mz, _ := device.ReadMagneticField()
+		t, _ := device.ReadTemperature()
+
+		if PLOTTER {
+			printPlotter(ax, ay, az, gx, gy, gz, mx, my, mz, t)
+			time.Sleep(time.Millisecond * 100)
+		} else {
+			printMonitor(ax, ay, az, gx, gy, gz, mx, my, mz, t)
+			time.Sleep(time.Millisecond * 1000)
+		}
+
+	}
+
+}
+
+// Arduino IDE's Serial Plotter
+func printPlotter(ax, ay, az, gx, gy, gz, mx, my, mz, t int32) {
+	if SHOW_ACCELERATION {
+		fmt.Printf("AX:%f, AY:%f, AZ:%f,", axis(ax), axis(ay), axis(az))
+	}
+	if SHOW_ROTATION {
+		fmt.Printf("GX:%f, GY:%f, GZ:%f,", axis(gx), axis(gy), axis(gz))
+	}
+	if SHOW_MAGNETIC_FIELD {
+		fmt.Printf("MX:%d, MY:%d, MZ:%d,", mx, my, mz)
+	}
+	if SHOW_TEMPERATURE {
+		fmt.Printf("T:%f", float32(t)/1000)
+	}
+	println()
+}
+
+// Any Serial Monitor
+func printMonitor(ax, ay, az, gx, gy, gz, mx, my, mz, t int32) {
+	if SHOW_ACCELERATION {
+		fmt.Printf("Acceleration (g): %f, %f, %f\r\n", axis(ax), axis(ay), axis(az))
+	}
+	if SHOW_ROTATION {
+		fmt.Printf("Rotation (dps): %f, %f, %f\r\n", axis(gx), axis(gy), axis(gz))
+	}
+	if SHOW_MAGNETIC_FIELD {
+		fmt.Printf("Magnetic field (nT): %d, %d, %d\r\n", mx, my, mz)
+	}
+	if SHOW_TEMPERATURE {
+		fmt.Printf("Temperature C: %f\r\n", float32(t)/1000)
+	}
+	println()
+}
+
+func axis(raw int32) float32 {
+	return float32(raw) / 1000000
+}

examples/makeybutton/main.go

@@ -0,0 +1,31 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/makeybutton"
+)
+
+var (
+	led    machine.Pin = machine.LED
+	button machine.Pin = machine.D10
+	key    *makeybutton.Button
+)
+
+func main() {
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	key = makeybutton.NewButton(button)
+	key.Configure()
+
+	for {
+		switch key.Get() {
+		case makeybutton.Pressed:
+			led.High()
+		case makeybutton.Released:
+			led.Low()
+		}
+		// the more frequent the more responsive
+		time.Sleep(50 * time.Millisecond)
+	}
+}

examples/max72xx/main.go

@@ -29,6 +29,7 @@ func main() {
 	driver.StopDisplayTest()
 	driver.SetDecodeMode(4)
 	driver.SetScanLimit(4)
+	driver.SetIntensity(8)
 	driver.StopShutdownMode()
 
 	for i := 1; i < int(digitNumber); i++ {