The previous implementation was a bare tail-jump to tinygo_scanstack
without spilling any registers or passing an sp argument. On Xtensa
windowed ABI, heap pointers held in physical registers were invisible
to the conservative GC, causing it to collect live objects and leading
to nil pointer dereferences under allocation pressure.
Flush all register windows to the stack using recursive call4 (15
levels for NAREG=64), then pass the current sp to tinygo_scanstack so
the GC scan from sp to stackTop covers every live value. Interrupts
are briefly masked during the spill to prevent window-overflow
exceptions from interfering.
Fixes crashes on ESP32-S3 observed when serving concurrent HTTP
requests.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Rewrite kernel and double exception handlers to save EXCCAUSE/EPC1 to
RTC STORE registers before triggering a software reset, replacing the
LED-blink diagnostic with post-mortem debug info that survives reset.
Add user exception dispatch in the level-1 handler with a weak
espradio_user_exception symbol so programs without espradio still link.
Implement procPin/procUnpin for Xtensa using RSIL/WSR PS to properly
disable interrupts during atomic operations. Fix abort() to use a
waiti loop instead of bare spin.
Add --wrap ldflags for malloc/calloc/free/realloc/ppCheckTxConnTrafficIdle
to support espradio WiFi blob integration.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Replace the ROTW-based register flush with a recursive call4 approach
that properly triggers hardware window-overflow exceptions. ROTW only
modifies WindowBase without saving registers, causing corruption when
switching goroutines. The recursive call4 correctly spills all 15 window
panes. Also clear WindowStart after the stack switch to prevent stale
overflow of garbage register values.
Add tinygo_task_current export for C interop.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Extend the linker script with proper IROM/DROM section layout for flash
execute-in-place. Update the boot assembly MMU init to dynamically map
all required flash pages based on _irom_end/_drom_end symbols instead
of hardcoding a single page.
Signed-off-by: deadprogram <ron@hybridgroup.com>
The ESP32-S3 ROM bootloader loads IRAM/DRAM into SRAM but does not
configure the flash cache or MMU. Previously the target incorrectly
reused the ESP32 boot assembly (esp32.S) which lacks flash XIP support.
Add a dedicated esp32s3.S boot assembly that:
- Sets up windowed-ABI registers, stack, and FPU
- Disables all watchdog timers (RTC, TIMG0, TIMG1, Super WDT)
- Configures VECBASE and clears PS.EXCM before any callx4
- Calls ROM functions to configure cache modes:
rom_config_instruction_cache_mode (16KB, 8-way, 32B line)
rom_config_data_cache_mode (32KB, 8-way, 32B line)
- Initializes MMU, maps flash page 0 for IROM and DROM,
clears bus-shut bits, and enables both caches
- Jumps to runtime.main in IROM (flash)
Update the linker script (esp32s3.ld) to place .text and .rodata in
flash-mapped regions (IROM/DROM) with proper alignment for the MMU
page size. Update esp32s3-interrupts.S with proper exception vector
handlers. Point esp32s3.json at the new esp32s3.S instead of esp32.S.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This allows for changes to the 'short-enums' flag when
using CGo since TinyGo already does this, and it is
needed for the esp32s3 processor.
Signed-off-by: deadprogram <ron@hybridgroup.com>
The "all:" prefix in //go:embed directives instructs the compiler to
include hidden files (starting with "." or "_") when embedding a
directory. Previously, the prefix was passed literally to path.Match,
which would never match.
Introduce an embedPattern struct that parses and validates the pattern
at construction time via newEmbedPattern(). The "all:" prefix is
stripped once and stored along with the glob pattern, avoiding repeated
string prefix checks. Pattern validation is absorbed into the
constructor, guaranteeing that any embedPattern value is valid and
eliminating the need for separate validation loops.
Fixes embedding with patterns like "//go:embed all:static".
Replace the busy-wait sleepTicks with an interrupt-driven version that
sets a TIMG0 timer alarm and waits for the interrupt to fire. The timer
alarm handler disables INT_ENA at the peripheral level to prevent
level-triggered re-assertion; sleepTicks re-enables it after each wake.
This avoids burning CPU cycles during time.Sleep and similar delays.
Replace the minimal inline ISR (which only disabled INTENABLE) with a
full level-1 interrupt handler that saves/restores the interrupted
context and dispatches to Go's handleInterrupt.
The handler uses callx4 (not callx0) to call into Go code because:
- callx0 does not set PS.CALLINC, so the Go function's entry
instruction uses stale CALLINC from the interrupted code, causing
wrong window rotation and a garbage stack pointer.
- callx4 explicitly sets CALLINC=1, and our frame pointer (a1) is
outside the callee's register window so it is preserved.
Also updates the USB Serial/JTAG ISR to disable INT_ENA (peripheral
level) instead of relying on INTENABLE, and adds signalInterrupt to
the dispatcher so sleepTicks can be woken by any interrupt.
* feat: add inheritable-only field to hide processor-level targets from listing
Processor-level targets like esp32, rp2040, etc. have flash-method set
so they leak through the existing heuristic filter in GetTargetSpecs and
appear in `tinygo targets` output. Add an "inheritable-only" JSON field
that is checked on raw JSON before inheritance resolution, preventing
these non-board targets from being listed while keeping them loadable
for direct builds and inheritance.
Ref: tinygo-org/tinygo#5178
* fix: prevent inheritable-only from propagating to child targets
The InheritableOnly bool field was propagating from parent to child
targets through overrideProperties, which would hide board targets
from GetTargetSpecs. Fix by preserving/restoring the field across
resolveInherits. Also simplify GetTargetSpecs by removing the raw
JSON pre-check workaround and remove nonexistent esp32c6 from tests.
* prevent build commands to use inheritable only targets
* esp32s3: add interrupt support
This finally adds the long awaited support for interrupts on the
Xtensa arch. Initially just for the ESP32-S3 but then others.
Signed-off-by: deadprogram <ron@hybridgroup.com>
* esp32s3: get interrupts working correctly
There were a number of needed changes in order to get interrupts correctly working
on the esp32s3 processor:
- PS.UM=1 in interruptInit() - routed interrupts to user exception vector (0x340)
instead of kernel (0x300)
- Inline ISR in the vector slot - external handlers via j/call0 crashed (likely
clang Xtensa literal pool issue with large movi constants in separate sections)
- Disable INTENABLE (not just INT_CLR) - the USB RX interrupt is level-triggered;
clearing INT_CLR alone causes infinite re-entry since data is still in the FIFO
- Buffered() re-enables INTENABLE after draining the hardware FIFO
Signed-off-by: deadprogram <ron@hybridgroup.com>
---------
Signed-off-by: deadprogram <ron@hybridgroup.com>
This fixes an "index out of range" panic that occurs when calculating
binary sizes. The strings.SplitN operation in findPackagePath can sometimes
return a slice with only one element, so we now verify the length of the
slice before attempting to access the second element.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Adds `.coexiram*`, `.wifiorslpiram*`, and `.iram1*` to the main `.iram`
segment in `esp32c3.ld`. This resolves the "Invalid image block, can't
boot" error on the ESP32-C3 by ensuring these precompiled ESP-IDF blob
sections are correctly aligned in memory.
Signed-off-by: deadprogram <ron@hybridgroup.com>
- Add `machine_esp32c3_flash.go` to implement the `BlockDevice` interface for ESP32-C3.
- Map internal ESP ROM SPI flash and cache invalidation functions via CGo.
- Update `targets/esp32c3.ld` to expose `__flash_data_start` and `__flash_data_end` linker variables.
- Add `esp32c3` to build tags in `src/machine/flash.go`.
- Ensure atomic flash operations by disabling interrupts and invalidating cache to prevent stale reads.
Signed-off-by: deadprogram <ron@hybridgroup.com>
The SVD-generated TIM constants in the STM32 device files have all per-channel
fields shifted by one channel position (e.g., CC1E is at the hardware position
of CC2E, OC1M_Pos is at the OC2M hardware position). This caused Set(), Unset(),
SetInverting(), and interrupt handlers to write to wrong bit positions.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This changes the default stack size for the esp32-c3 and esp32-s3
to 8kb. Since they have more onboard memory and a larger stack size is
needed for any networking etc this default seems like a more sensible
one, in similar way to the rp2040/rp2350 defaults.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Signed-off-by: deadprogram <ron@hybridgroup.com>
machine/stm32u585: fix PWR peripheral clock was never enabled
On STM32U5, PWR is on AHB3 and requires RCC.AHB3ENR.PWREN -
unlike some other STM32 families where PWR is always clocked.
Without this, all writes to PWR registers (including IO2SV for
VDDIO2) were silently dropped, so GPIOG pins could never drive.
Signed-off-by: deadprogram <ron@hybridgroup.com>
target: correct I2C pin mapping for Arduino UNO Q
Signed-off-by: deadprogram <ron@hybridgroup.com>
The complex 160MHz PLL initialization was hanging the MCU.
The fix: Replaced the entire PLL-based clock init with the MSI 4MHz default
Signed-off-by: deadprogram <ron@hybridgroup.com>
Add SPIv2 driver for STM32U5 using TXDR/RXDR and CFG1/CFG2 registers,
which differ from the classic SPI peripheral on older STM32 families.
Implements Configure() and single-byte Transfer().
Add SPI1 peripheral and pin definitions to arduino-uno-q board.
Exclude stm32u5 from the shared classic SPI build tag.
Add I2C timing values for STM32U585 at 160MHz PCLK1 (10/100/400/500 KHz).
Add I2C1 peripheral and pin definitions to arduino-uno-q board.
Update i2c_revb build tag to include stm32u5.
Add machine-level support for STM32U5 family: GPIO ports A-I with clock
enables via AHB2ENR1, EXTI pin interrupts (individual EXTI0-15 IRQs),
timer definitions (TIM1-8, TIM15-17), RNG, and alternate function clock
enables for all peripherals.
Add UART support with STM32U585 baud rate and register configuration.
Add arduino-uno-q board pin definitions and USART2 serial.
Update shared build tags: gpio_revb, gpio_reva, exti_exti, exti_syscfg.
Add processor target (cortex-m33), linker script (2048K flash, 768K RAM),
and arduino-uno-q board target. Runtime initializes 160MHz clock via PLL1
from HSI16, with PWR Range 1 and EPOD booster.
Also add psctype abstraction for timer PSC register width, needed because
the U5 SVD defines PSC as a 16-bit register.
This improves the ESP32-C3 USBDevice implementation by using interrupts
to properly handle data RX/TX.
It also stubs out USB interfaces for HID functions, since those cannot
be implemented on ESP32-C3 due to using a JTAG-USB interface.
Signed-off-by: deadprogram <ron@hybridgroup.com>
MCAUSE was never being cleared after handling an interrupt.
On RISC-V, mret does NOT zero MCAUSE — it retains the last
trap cause. Every other TinyGo RISC-V target (FE310, K210,
QEMU) explicitly does riscv.MCAUSE.Set(0) after handling.
The ESP32-C3 was missing this.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This adds a new flash method 'esp32jtag' to explicitly define when this
reset method is needed. When flashing esp32c3/esp32s3 boards on Windows
this method of board reset is required, otherwise the reset does not
take place and the board cannot be flashed.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Damian Gryski
Patricio Whittingslow
deadprogram
MaximAL
Abhishek Goyal
Carlos Henrique Guardão Gandarez
Carlos Henrique Guardão Gandarez
rdon
Dima Jolkin