whoops, forgot to set isOut

CHANGELOG.md

@@ -1,30 +1,3 @@
-0.32.0
----
-- **enhancements**
-    - **bmp280**
-        - remove alloc on read sensor data
-    - **ws2812**
-        - add 200MHz support for the Cortex-M0/rp2040
-
-- **bugfixes**
-    - **ssd1306**
-        - remove time.Sleep from SSD1306 SPI transfer code
-    - **tmc2209**
-        - tmc2209 bug fixes (#755)
-
-- **docs**
-    - **contributing**
-        - add driver design pointer to CONTRIBUTING.md
-
-
-0.31.0
----
----
-- **enhancements**
-    - **spi**
-        - update all SPI usage to use either *machine.SPI or drivers.SPI
-
-
 0.30.0
 ---
 - **new devices**

CONTRIBUTING.md

@@ -8,9 +8,6 @@ We would like your help to make this project better, so we appreciate any contri
 
 We'd love to get your feedback on getting started with TinyGo. Run into any difficulty, confusion, or anything else? You are not alone. We want to know about your experience, so we can help the next people. Please open a Github issue with your questions, or you can also get in touch directly with us on our Slack channel at [https://gophers.slack.com/messages/CDJD3SUP6](https://gophers.slack.com/messages/CDJD3SUP6).
 
-### Driver design
-Before porting or writing a driver from scratch please read **[Driver Design for TinyGo](https://tinygo.org/docs/guides/driver-design)**.
-
 ### One of the TinyGo drivers is not working as you expect
 
 Please open a Github issue with your problem, and we will be happy to assist.

apa102/apa102.go

@@ -5,9 +5,10 @@ package apa102 // import "tinygo.org/x/drivers/apa102"
 
 import (
 	"image/color"
-	"machine"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 const (
@@ -37,8 +38,11 @@ func New(b drivers.SPI) *Device {
 
 // NewSoftwareSPI returns a new APA102 driver that will use a software based
 // implementation of the SPI protocol.
-func NewSoftwareSPI(sckPin, sdoPin machine.Pin, delay uint32) *Device {
-	return New(&bbSPI{SCK: sckPin, SDO: sdoPin, Delay: delay})
+func NewSoftwareSPI(sckPin, sdoPin pin.Output, delay uint32) *Device {
+	return New(&bbSPI{SCK: sckPin.Set, SDO: sdoPin.Set, Delay: delay, configurePins: func() {
+		legacy.ConfigurePinOut(sckPin)
+		legacy.ConfigurePinOut(sdoPin)
+	}})
 }
 
 // WriteColors writes the given RGBA color slice out using the APA102 protocol.

apa102/softspi.go

@@ -1,6 +1,9 @@
 package apa102
 
-import "machine"
+import (
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
 
 // bbSPI is a dumb bit-bang implementation of SPI protocol that is hardcoded
 // to mode 0 and ignores trying to receive data. Just enough for the APA102.
@@ -8,15 +11,18 @@ import "machine"
 // most purposes other than the APA102 package. It might be desirable to make
 // this more generic and include it in the TinyGo "machine" package instead.
 type bbSPI struct {
-	SCK   machine.Pin
-	SDO   machine.Pin
-	Delay uint32
+	SCK           drivers.PinOutput
+	SDO           drivers.PinOutput
+	Delay         uint32
+	configurePins func()
 }
 
 // Configure sets up the SCK and SDO pins as outputs and sets them low
 func (s *bbSPI) Configure() {
-	s.SCK.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	s.SDO.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	if s.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	s.configurePins()
 	s.SCK.Low()
 	s.SDO.Low()
 	if s.Delay == 0 {

bmi160/bmi160.go

@@ -1,31 +1,36 @@
 package bmi160
 
 import (
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // DeviceSPI is the SPI interface to a BMI160 accelerometer/gyroscope. There is
 // also an I2C interface, but it is not yet supported.
 type DeviceSPI struct {
 	// Chip select pin
-	CSB machine.Pin
+	csb drivers.PinOutput
 
 	buf [7]byte
 
 	// SPI bus (requires chip select to be usable).
-	Bus drivers.SPI
+	bus           drivers.SPI
+	configurePins func()
 }
 
 // NewSPI returns a new device driver. The pin and SPI interface are not
 // touched, provide a fully configured SPI object and call Configure to start
 // using this device.
-func NewSPI(csb machine.Pin, spi drivers.SPI) *DeviceSPI {
+func NewSPI(csb pin.Output, spi drivers.SPI) *DeviceSPI {
 	return &DeviceSPI{
-		CSB: csb, // chip select
-		Bus: spi,
+		csb: csb.Set, // chip select
+		bus: spi,
+		configurePins: func() {
+			legacy.ConfigurePinOut(csb)
+		},
 	}
 }
 
@@ -33,8 +38,11 @@ func NewSPI(csb machine.Pin, spi drivers.SPI) *DeviceSPI {
 // configures the BMI160, but it does not configure the SPI interface (it is
 // assumed to be up and running).
 func (d *DeviceSPI) Configure() error {
-	d.CSB.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.CSB.High()
+	if d.configurePins == nil {
+		return legacy.ErrConfigBeforeInstantiated
+	}
+	d.configurePins()
+	d.csb.High()
 
 	// The datasheet recommends doing a register read from address 0x7F to get
 	// SPI communication going:
@@ -86,9 +94,9 @@ func (d *DeviceSPI) ReadTemperature() (temperature int32, err error) {
 	data[0] = 0x80 | reg_TEMPERATURE_0
 	data[1] = 0
 	data[2] = 0
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -123,9 +131,9 @@ func (d *DeviceSPI) ReadAcceleration() (x int32, y int32, z int32, err error) {
 	for i := 1; i < len(data); i++ {
 		data[i] = 0
 	}
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -153,9 +161,9 @@ func (d *DeviceSPI) ReadRotation() (x int32, y int32, z int32, err error) {
 	for i := 1; i < len(data); i++ {
 		data[i] = 0
 	}
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -201,9 +209,9 @@ func (d *DeviceSPI) readRegister(address uint8) uint8 {
 	data := d.buf[:2]
 	data[0] = 0x80 | address
 	data[1] = 0
-	d.CSB.Low()
-	d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	d.bus.Tx(data, data)
+	d.csb.High()
 	return data[1]
 }
 
@@ -217,7 +225,7 @@ func (d *DeviceSPI) writeRegister(address, data uint8) {
 	buf[0] = address
 	buf[1] = data
 
-	d.CSB.Low()
-	d.Bus.Tx(buf, buf)
-	d.CSB.High()
+	d.csb.Low()
+	d.bus.Tx(buf, buf)
+	d.csb.High()
 }

bmp280/bmp280.go

@@ -23,7 +23,6 @@ type Filter uint
 type Device struct {
 	bus         drivers.I2C
 	Address     uint16
-	buf         [6]byte
 	cali        calibrationCoefficients
 	Temperature Oversampling
 	Pressure    Oversampling
@@ -135,8 +134,8 @@ func (d *Device) PrintCali() {
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
 func (d *Device) ReadTemperature() (temperature int32, err error) {
-	data := d.buf[:3]
-	if err = d.readData(REG_TEMP, data); err != nil {
+	data, err := d.readData(REG_TEMP, 3)
+	if err != nil {
 		return
 	}
 
@@ -159,8 +158,8 @@ func (d *Device) ReadTemperature() (temperature int32, err error) {
 // ReadPressure returns the pressure in milli pascals (mPa).
 func (d *Device) ReadPressure() (pressure int32, err error) {
 	// First 3 bytes are Pressure, last 3 bytes are Temperature
-	data := d.buf[:6]
-	if err = d.readData(REG_PRES, data); err != nil {
+	data, err := d.readData(REG_PRES, 6)
+	if err != nil {
 		return
 	}
 
@@ -204,7 +203,7 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 }
 
 // readData reads n number of bytes of the specified register
-func (d *Device) readData(register int, data []byte) error {
+func (d *Device) readData(register int, n int) ([]byte, error) {
 	// If not in normal mode, set the mode to FORCED mode, to prevent incorrect measurements
 	// After the measurement in FORCED mode, the sensor will return to SLEEP mode
 	if d.Mode != MODE_NORMAL {
@@ -219,7 +218,9 @@ func (d *Device) readData(register int, data []byte) error {
 	}
 
 	// Read the requested register
-	return legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
+	data := make([]byte, n)
+	err := legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
+	return data, err
 }
 
 // convert3Bytes converts three bytes to int32

buzzer/buzzer.go

@@ -2,22 +2,23 @@
 package buzzer // import "tinygo.org/x/drivers/buzzer"
 
 import (
-	"machine"
-
 	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // Device wraps a GPIO connection to a buzzer.
 type Device struct {
-	pin  machine.Pin
+	pin  drivers.PinOutput
 	High bool
 	BPM  float64
 }
 
 // New returns a new buzzer driver given which pin to use
-func New(pin machine.Pin) Device {
+func New(pin pin.Output) Device {
 	return Device{
-		pin:  pin,
+		pin:  pin.Set,
 		High: false,
 		BPM:  96.0,
 	}
@@ -25,14 +26,14 @@ func New(pin machine.Pin) Device {
 
 // On sets the buzzer to a high state.
 func (l *Device) On() (err error) {
-	l.pin.Set(true)
+	l.pin.High()
 	l.High = true
 	return
 }
 
 // Off sets the buzzer to a low state.
 func (l *Device) Off() (err error) {
-	l.pin.Set(false)
+	l.pin.Low()
 	l.High = false
 	return
 }

easystepper/easystepper.go

@@ -2,9 +2,9 @@
 package easystepper // import "tinygo.org/x/drivers/easystepper"
 
 import (
-	"errors"
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 // StepMode determines the coil sequence used to perform a single step
@@ -30,28 +30,10 @@ func (sm StepMode) stepCount() uint {
 	}
 }
 
-// DeviceConfig contains the configuration data for a single easystepper driver
-type DeviceConfig struct {
-	// Pin1 ... Pin4 determines the pins to configure and use for the device
-	Pin1, Pin2, Pin3, Pin4 machine.Pin
-	// StepCount is the number of steps required to perform a full revolution of the stepper motor
-	StepCount uint
-	// RPM determines the speed of the stepper motor in 'Revolutions per Minute'
-	RPM uint
-	// Mode determines the coil sequence used to perform a single step
-	Mode StepMode
-}
-
-// DualDeviceConfig contains the configuration data for a dual easystepper driver
-type DualDeviceConfig struct {
-	DeviceConfig
-	// Pin5 ... Pin8 determines the pins to configure and use for the second device
-	Pin5, Pin6, Pin7, Pin8 machine.Pin
-}
-
 // Device holds the pins and the delay between steps
 type Device struct {
-	pins       [4]machine.Pin
+	pins       [4]drivers.PinOutput
+	config     func()
 	stepDelay  time.Duration
 	stepNumber uint8
 	stepMode   StepMode
@@ -62,51 +44,6 @@ type DualDevice struct {
 	devices [2]*Device
 }
 
-// New returns a new single easystepper driver given a DeviceConfig
-func New(config DeviceConfig) (*Device, error) {
-	if config.StepCount == 0 || config.RPM == 0 {
-		return nil, errors.New("config.StepCount and config.RPM must be > 0")
-	}
-	return &Device{
-		pins:      [4]machine.Pin{config.Pin1, config.Pin2, config.Pin3, config.Pin4},
-		stepDelay: time.Second * 60 / time.Duration((config.StepCount * config.RPM)),
-		stepMode:  config.Mode,
-	}, nil
-}
-
-// Configure configures the pins of the Device
-func (d *Device) Configure() {
-	for _, pin := range d.pins {
-		pin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	}
-}
-
-// NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
-func NewDual(config DualDeviceConfig) (*DualDevice, error) {
-	// Create the first device
-	dev1, err := New(config.DeviceConfig)
-	if err != nil {
-		return nil, err
-	}
-	// Create the second device
-	config.DeviceConfig.Pin1 = config.Pin5
-	config.DeviceConfig.Pin2 = config.Pin6
-	config.DeviceConfig.Pin3 = config.Pin7
-	config.DeviceConfig.Pin4 = config.Pin8
-	dev2, err := New(config.DeviceConfig)
-	if err != nil {
-		return nil, err
-	}
-	// Return composite dual device
-	return &DualDevice{devices: [2]*Device{dev1, dev2}}, nil
-}
-
-// Configure configures the pins of the DualDevice
-func (d *DualDevice) Configure() {
-	d.devices[0].Configure()
-	d.devices[1].Configure()
-}
-
 // Move rotates the motor the number of given steps
 // (negative steps will rotate it the opposite direction)
 func (d *Device) Move(steps int32) {

easystepper/easystepper_go.go

@@ -0,0 +1,26 @@
+package easystepper
+
+import (
+	"errors"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+func NewCrossPlatform(stepcount, rpm uint, mode StepMode, pins [4]drivers.PinOutput) (*Device, error) {
+	if stepcount == 0 || rpm == 0 {
+		return nil, errors.New("zero rpm and/or stepcount")
+	}
+	for i := range pins {
+		if pins[i] == nil {
+			return nil, errors.New("nil pin")
+		}
+	}
+	d := &Device{
+		pins:      pins,
+		stepDelay: time.Second * 60 / time.Duration((stepcount * rpm)),
+		stepMode:  mode,
+		config:    func() {},
+	}
+	return d, nil
+}

easystepper/easystepper_tinygo.go

@@ -0,0 +1,83 @@
+//go:build baremetal
+
+package easystepper
+
+import (
+	"errors"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
+
+// New returns a new single easystepper driver given a DeviceConfig
+func New(config DeviceConfig) (*Device, error) {
+	if config.StepCount == 0 || config.RPM == 0 {
+		return nil, errors.New("config.StepCount and config.RPM must be > 0")
+	}
+	return &Device{
+		pins:      [4]drivers.PinOutput{config.Pin1.Set, config.Pin2.Set, config.Pin3.Set, config.Pin4.Set},
+		stepDelay: time.Second * 60 / time.Duration((config.StepCount * config.RPM)),
+		stepMode:  config.Mode,
+		config: func() {
+			legacy.ConfigurePinOut(config.Pin1)
+			legacy.ConfigurePinOut(config.Pin2)
+			legacy.ConfigurePinOut(config.Pin3)
+			legacy.ConfigurePinOut(config.Pin4)
+		},
+	}, nil
+}
+
+// Configure configures the pins of the Device
+func (d *Device) Configure() {
+	if d.config == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.config()
+}
+
+// Configure configures the pins of the DualDevice
+func (d *DualDevice) Configure() {
+	d.devices[0].Configure()
+	d.devices[1].Configure()
+}
+
+// NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
+func NewDual(config DualDeviceConfig) (*DualDevice, error) {
+	// Create the first device
+	dev1, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
+	}
+	// Create the second device
+	config.DeviceConfig.Pin1 = config.Pin5
+	config.DeviceConfig.Pin2 = config.Pin6
+	config.DeviceConfig.Pin3 = config.Pin7
+	config.DeviceConfig.Pin4 = config.Pin8
+	dev2, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
+	}
+	// Return composite dual device
+	return &DualDevice{devices: [2]*Device{dev1, dev2}}, nil
+}
+
+// DeviceConfig contains the configuration data for a single easystepper driver
+type DeviceConfig struct {
+	// Pin1 ... Pin4 determines the pins to configure and use for the device
+	Pin1, Pin2, Pin3, Pin4 machine.Pin
+	// StepCount is the number of steps required to perform a full revolution of the stepper motor
+	StepCount uint
+	// RPM determines the speed of the stepper motor in 'Revolutions per Minute'
+	RPM uint
+	// Mode determines the coil sequence used to perform a single step
+	Mode StepMode
+}
+
+// DualDeviceConfig contains the configuration data for a dual easystepper driver
+type DualDeviceConfig struct {
+	DeviceConfig
+	// Pin5 ... Pin8 determines the pins to configure and use for the second device
+	Pin5, Pin6, Pin7, Pin8 machine.Pin
+}

ft6336/ft6336.go

@@ -5,28 +5,29 @@
 package ft6336
 
 import (
-	"machine"
-
 	"tinygo.org/x/drivers"
 	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 	"tinygo.org/x/drivers/touch"
 )
 
 // Device wraps FT6336 I2C Self-Capacitive touch
 type Device struct {
-	bus     drivers.I2C
-	buf     []byte
-	Address uint8
-	intPin  machine.Pin
+	bus           drivers.I2C
+	buf           []byte
+	Address       uint8
+	configurePins func()
 }
 
 // New returns FT6336 device for the provided I2C bus using default address.
-func New(i2c drivers.I2C, intPin machine.Pin) *Device {
+func New(i2c drivers.I2C, intPin pin.Input) *Device {
 	return &Device{
 		bus:     i2c,
 		buf:     make([]byte, 11),
 		Address: Address,
-		intPin:  intPin,
+		configurePins: func() {
+			legacy.ConfigurePinInputPulldown(intPin)
+		},
 	}
 }
 
@@ -36,8 +37,11 @@ type Config struct {
 
 // Configure the FT6336 device.
 func (d *Device) Configure(config Config) error {
+	if d.configurePins == nil {
+		return legacy.ErrConfigBeforeInstantiated
+	}
 	d.write1Byte(0xA4, 0x00)
-	d.intPin.Configure(machine.PinConfig{Mode: machine.PinInputPulldown})
+	d.configurePins()
 	return nil
 }
 

gc9a01/gc9a01.go

@@ -5,12 +5,13 @@ package gc9a01 // import "tinygo.org/x/drivers/gc9a01"
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"errors"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // Rotation controls the rotation used by the display.
@@ -22,10 +23,10 @@ type FrameRate uint8
 // Device wraps an SPI connection.
 type Device struct {
 	bus             drivers.SPI
-	dcPin           machine.Pin
-	resetPin        machine.Pin
-	csPin           machine.Pin
-	blPin           machine.Pin
+	dcPin           drivers.PinOutput
+	resetPin        drivers.PinOutput
+	csPin           drivers.PinOutput
+	blPin           drivers.PinOutput
 	width           int16
 	height          int16
 	columnOffsetCfg int16
@@ -52,17 +53,17 @@ type Config struct {
 }
 
 // New creates a new ST7789 connection. The SPI wire must already be configured.
-func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) Device {
-	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	blPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin pin.Output) Device {
+	legacy.ConfigurePinOut(resetPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(blPin)
 	return Device{
 		bus:      bus,
-		resetPin: resetPin,
-		dcPin:    dcPin,
-		csPin:    csPin,
-		blPin:    blPin,
+		resetPin: resetPin.Set,
+		dcPin:    dcPin.Set,
+		csPin:    csPin.Set,
+		blPin:    blPin.Set,
 	}
 }
 
@@ -226,7 +227,7 @@ func (d *Device) Data(data uint8) {
 
 // Tx sends data to the display
 func (d *Device) Tx(data []byte, isCommand bool) {
-	d.dcPin.Set(!isCommand)
+	d.dcPin(!isCommand)
 	d.bus.Tx(data, nil)
 }
 

hcsr04/hcsr04.go

@@ -5,30 +5,40 @@
 package hcsr04
 
 import (
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 const TIMEOUT = 23324 // max sensing distance (4m)
 
 // Device holds the pins
 type Device struct {
-	trigger machine.Pin
-	echo    machine.Pin
+	trigger       drivers.PinOutput
+	echo          drivers.PinInput
+	configurePins func()
 }
 
 // New returns a new ultrasonic driver given 2 pins
-func New(trigger, echo machine.Pin) Device {
+func New(trigger pin.Output, echo pin.Input) Device {
 	return Device{
-		trigger: trigger,
-		echo:    echo,
+		trigger: trigger.Set,
+		echo:    echo.Get,
+		configurePins: func() {
+			legacy.ConfigurePinOut(trigger)
+			legacy.ConfigurePinInput(echo)
+		},
 	}
 }
 
 // Configure configures the pins of the Device
 func (d *Device) Configure() {
-	d.trigger.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.echo.Configure(machine.PinConfig{Mode: machine.PinInput})
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.configurePins()
 }
 
 // ReadDistance returns the distance of the object in mm
@@ -52,7 +62,7 @@ func (d *Device) ReadPulse() int32 {
 	d.trigger.Low()
 	i := uint8(0)
 	for {
-		if d.echo.Get() {
+		if d.echo() {
 			t = time.Now()
 			break
 		}
@@ -66,7 +76,7 @@ func (d *Device) ReadPulse() int32 {
 	}
 	i = 0
 	for {
-		if !d.echo.Get() {
+		if !d.echo() {
 			return int32(time.Since(t).Microseconds())
 		}
 		i++

hd44780/hd44780.go

@@ -210,7 +210,7 @@ func (d *Device) SendCommand(command byte) {
 	d.bus.SetCommandMode(true)
 	d.bus.Write([]byte{command})
 
-	for d.busy(command == DISPLAY_CLEAR || command == CURSOR_HOME) {
+	for d.isBusy(command == DISPLAY_CLEAR || command == CURSOR_HOME) {
 	}
 }
 
@@ -219,7 +219,7 @@ func (d *Device) sendData(data byte) {
 	d.bus.SetCommandMode(false)
 	d.bus.Write([]byte{data})
 
-	for d.busy(false) {
+	for d.isBusy(false) {
 	}
 }
 
@@ -231,9 +231,9 @@ func (d *Device) CreateCharacter(cgramAddr uint8, data []byte) {
 	}
 }
 
-// busy returns true when hd447890 is busy
+// isBusy returns true when hd447890 is isBusy
 // or after the timeout specified
-func (d *Device) busy(longDelay bool) bool {
+func (d *Device) isBusy(longDelay bool) bool {
 	if d.bus.WriteOnly() {
 		// Can't read busy flag if write only, so sleep a bit then return
 		if longDelay {
@@ -261,7 +261,7 @@ func (d *Device) busy(longDelay bool) bool {
 
 // Busy returns true when hd447890 is busy
 func (d *Device) Busy() bool {
-	return d.busy(false)
+	return d.isBusy(false)
 }
 
 // Size returns the current size of the display.

internal/legacy/pinhal.go

@@ -0,0 +1,54 @@
+package legacy
+
+import (
+	"errors"
+
+	"tinygo.org/x/drivers/internal/pin"
+)
+
+// ConfigurePinOut is a legacy function used to configure pins as outputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinOut(po pin.Output) {
+	configurePinOut(po)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInputPulldown(pi pin.Input) {
+	configurePinInputPulldown(pi)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInput(pi pin.Input) {
+	configurePinInput(pi)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInputPullup(pi pin.Input) {
+	configurePinInputPullup(pi)
+}
+
+// PinIsNoPin returns true if the argument is a machine.Pin type and is the machine.NoPin predeclared type.
+//
+// Deprecated: Drivers do not require pin knowledge from now on.
+func PinIsNoPin(pin any) bool {
+	return pinIsNoPin(pin)
+}
+
+var (
+	ErrConfigBeforeInstantiated = errors.New("device must be instantiated with New before calling Configure method")
+)

internal/legacy/pinhal_go.go

@@ -0,0 +1,11 @@
+//go:build !baremetal
+
+package legacy
+
+import "tinygo.org/x/drivers/internal/pin"
+
+func configurePinOut(p pin.Output)          {}
+func configurePinInput(p pin.Input)         {}
+func configurePinInputPulldown(p pin.Input) {}
+func configurePinInputPullup(p pin.Input)   {}
+func pinIsNoPin(a any) bool                 { return false }

internal/legacy/pinhal_nopulls.go

@@ -0,0 +1,10 @@
+//go:build baremetal && fe310
+
+package legacy
+
+import "machine"
+
+const (
+	pulldown = machine.PinInput
+	pullup   = machine.PinInput
+)

internal/legacy/pinhal_pulls.go

@@ -0,0 +1,13 @@
+//go:build baremetal && !fe310
+
+package legacy
+
+import "machine"
+
+// If you are getting a build error here you then we missed adding
+// your CPU build tag to the list of CPUs that do not have pulldown/pullups.
+// Add it above and in pinhal_nopulls! You should also add a smoketest for it :)
+const (
+	pulldown = machine.PinInputPulldown
+	pullup   = machine.PinInputPullup
+)

internal/legacy/pinhal_tinygo.go

@@ -0,0 +1,37 @@
+//go:build baremetal
+
+package legacy
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/internal/pin"
+)
+
+func configurePinOut(po pin.Output) {
+	configurePin(po, machine.PinOutput)
+}
+
+func configurePinInputPulldown(pi pin.Input) {
+	configurePin(pi, pulldown) // some chips do not have pull down, in which case pulldown==machine.PinInput.
+}
+
+func configurePinInput(pi pin.Input) {
+	configurePin(pi, machine.PinInput)
+}
+
+func configurePinInputPullup(pi pin.Input) {
+	configurePin(pi, pullup) // some chips do not have pull up, in which case pullup==machine.PinInput.
+}
+
+func pinIsNoPin(a any) bool {
+	p, ok := a.(machine.Pin)
+	return ok && p == machine.NoPin
+}
+
+func configurePin(p any, mode machine.PinMode) {
+	machinePin, ok := p.(machine.Pin)
+	if ok {
+		machinePin.Configure(machine.PinConfig{Mode: mode})
+	}
+}

internal/pin/pin.go

@@ -0,0 +1,23 @@
+package pin
+
+import "tinygo.org/x/drivers"
+
+// Here to aid relevant documentation links of [drivers.PinOutput] and [drivers.PinInput].
+var _ drivers.PinOutput
+
+// Output represents a pin hardware abstraction layer for a pin that can output a digital signal.
+//
+// This is an alternative to [drivers.PinOutput] abstraction which is a function type and has
+// not been standardized as of yet as a standard HAL in the drivers package,
+// [discussion ongoing here].
+//
+// [discussion ongoing here]: https://github.com/orgs/tinygo-org/discussions/5043
+type Output interface {
+	Set(level bool)
+}
+
+// Input represents a pin hardware abstraction layer.
+// See [Output] for more information on why this type exists separate to drivers.
+type Input interface {
+	Get() (level bool)
+}

max6675/max6675.go

@@ -3,9 +3,9 @@ package max6675
 
 import (
 	"errors"
-	"machine"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // ErrThermocoupleOpen is returned when the thermocouple input is open.
@@ -14,16 +14,16 @@ var ErrThermocoupleOpen = errors.New("thermocouple input open")
 
 type Device struct {
 	bus drivers.SPI
-	cs  machine.Pin
+	cs  drivers.PinOutput
 }
 
 // Create a new Device to read from a MAX6675 thermocouple.
 // Pins must be configured before use.  Frequency for SPI
 // should be 4.3MHz maximum.
-func NewDevice(bus drivers.SPI, cs machine.Pin) *Device {
+func NewDevice(bus drivers.SPI, cs pin.Output) *Device {
 	return &Device{
 		bus: bus,
-		cs:  cs,
+		cs:  cs.Set,
 	}
 }
 

max72xx/max72xx.go

@@ -3,31 +3,36 @@
 package max72xx
 
 import (
-	"machine"
-
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Device struct {
-	bus drivers.SPI
-	cs  machine.Pin
+	bus           drivers.SPI
+	cs            drivers.PinOutput
+	configurePins func()
 }
 
 // NewDriver creates a new max7219 connection. The SPI wire must already be configured
 // The SPI frequency must not be higher than 10MHz.
 // parameter cs: the datasheet also refers to this pin as "load" pin.
-func NewDevice(bus drivers.SPI, cs machine.Pin) *Device {
+func NewDevice(bus drivers.SPI, cs pin.Output) *Device {
 	return &Device{
 		bus: bus,
-		cs:  cs,
+		cs:  cs.Set,
+		configurePins: func() {
+			legacy.ConfigurePinOut(cs)
+		},
 	}
 }
 
 // Configure setups the pins.
 func (driver *Device) Configure() {
-	outPutConfig := machine.PinConfig{Mode: machine.PinOutput}
-
-	driver.cs.Configure(outPutConfig)
+	if driver.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	driver.configurePins()
 }
 
 // SetScanLimit sets the scan limit. Maximum is 8.

mcp2515/mcp2515.go

@@ -8,18 +8,20 @@ package mcp2515 // import "tinygo.org/x/drivers/mcp2515"
 import (
 	"errors"
 	"fmt"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // Device wraps MCP2515 SPI CAN Module.
 type Device struct {
-	spi     SPI
-	cs      machine.Pin
-	msg     *CANMsg
-	mcpMode byte
+	spi           SPI
+	cs            drivers.PinOutput
+	msg           *CANMsg
+	mcpMode       byte
+	configurePins func()
 }
 
 // CANMsg stores CAN message fields.
@@ -36,15 +38,18 @@ const (
 )
 
 // New returns a new MCP2515 driver. Pass in a fully configured SPI bus.
-func New(b drivers.SPI, csPin machine.Pin) *Device {
+func New(b drivers.SPI, csPin pin.Output) *Device {
 	d := &Device{
 		spi: SPI{
 			bus: b,
 			tx:  make([]byte, 0, bufferSize),
 			rx:  make([]byte, 0, bufferSize),
 		},
-		cs:  csPin,
+		cs:  csPin.Set,
 		msg: &CANMsg{},
+		configurePins: func() {
+			legacy.ConfigurePinOut(csPin)
+		},
 	}
 
 	return d
@@ -52,7 +57,10 @@ func New(b drivers.SPI, csPin machine.Pin) *Device {
 
 // Configure sets up the device for communication.
 func (d *Device) Configure() {
-	d.cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.configurePins()
 }
 
 const beginTimeoutValue int = 10

onewire/onewire.go

@@ -5,8 +5,9 @@ package onewire // import "tinygo.org/x/drivers/onewire"
 
 import (
 	"errors"
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 // OneWire ROM commands
@@ -19,7 +20,8 @@ const (
 
 // Device wraps a connection to an 1-Wire devices.
 type Device struct {
-	p machine.Pin
+	set drivers.PinOutput
+	get drivers.PinInput
 }
 
 // Config wraps a configuration to an 1-Wire devices.
@@ -32,24 +34,30 @@ var (
 	errReadAddress    = errors.New("Error: OneWire. Read address error: CRC mismatch.")
 )
 
-// New creates a new GPIO 1-Wire connection.
-// The pin must be pulled up to the VCC via a resistor greater than 500 ohms (default 4.7k).
-func New(p machine.Pin) Device {
-	return Device{
-		p: p,
+// NewFromFuncs expects pin setter and getter for DQ line. Ideally this driver should receive
+// a one-wire bus HAL abstraction, but I was asked to show how this could be done using pin HAL so here goes.
+func NewFromFuncs(getPinLevel drivers.PinInput, setPinLevel drivers.PinOutput) *Device {
+	return &Device{
+		set: setPinLevel,
+		get: getPinLevel,
 	}
 }
 
 // Configure initializes the protocol.
 func (d *Device) Configure(config Config) {}
 
+// By setting the pin value one should configure as output and also expect a more
+// consistent behaviour across all tinygo hosts by pulling DQ line low consistently. Win-win.
+func (d *Device) cfgOut() { d.set.Low() }
+func (d *Device) cfgIn()  { d.get() }
+
 // Reset pull DQ line low, then up.
 func (d Device) Reset() error {
-	d.p.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	d.cfgOut()
 	time.Sleep(480 * time.Microsecond)
-	d.p.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	d.cfgIn()
 	time.Sleep(70 * time.Microsecond)
-	precence := d.p.Get()
+	precence := d.get()
 	time.Sleep(410 * time.Microsecond)
 	if precence {
 		return errNoPresence
@@ -59,14 +67,14 @@ func (d Device) Reset() error {
 
 // WriteBit transmits a bit to 1-Wire bus.
 func (d Device) WriteBit(data uint8) {
-	d.p.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	d.cfgOut()
 	if data&1 == 1 { // Send '1'
 		time.Sleep(5 * time.Microsecond)
-		d.p.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+		d.cfgIn()
 		time.Sleep(60 * time.Microsecond)
 	} else { // Send '0'
 		time.Sleep(60 * time.Microsecond)
-		d.p.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+		d.cfgIn()
 		time.Sleep(5 * time.Microsecond)
 	}
 }
@@ -81,11 +89,11 @@ func (d Device) Write(data uint8) {
 
 // ReadBit receives a bit from 1-Wire bus.
 func (d Device) ReadBit() (data uint8) {
-	d.p.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	d.cfgOut()
 	time.Sleep(3 * time.Microsecond)
-	d.p.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
+	d.cfgIn()
 	time.Sleep(8 * time.Microsecond)
-	if d.p.Get() {
+	if d.get() {
 		data = 1
 	}
 	time.Sleep(60 * time.Microsecond)

onewire/onewire_tinygo.go

@@ -0,0 +1,29 @@
+package onewire
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/internal/legacy"
+)
+
+// New creates a new GPIO 1-Wire connection.
+// The pin must be pulled up to the VCC via a resistor greater than 500 ohms (default 4.7k).
+func New(p machine.Pin) Device {
+	isOut := false
+	return Device{
+		set: func(level bool) {
+			if !isOut {
+				legacy.ConfigurePinOut(p)
+				isOut = true
+			}
+			p.Set(level)
+		},
+		get: func() (level bool) {
+			if isOut {
+				legacy.ConfigurePinInputPullup(p)
+				isOut = false
+			}
+			return p.Get()
+		},
+	}
+}

pcd8544/pcd8544.go

@@ -6,18 +6,18 @@ package pcd8544 // import "tinygo.org/x/drivers/pcd8544"
 import (
 	"errors"
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 // Device wraps an SPI connection.
 type Device struct {
 	bus        drivers.SPI
-	dcPin      machine.Pin
-	rstPin     machine.Pin
-	scePin     machine.Pin
+	dcPin      drivers.PinOutput
+	rstPin     drivers.PinOutput
+	scePin     drivers.PinOutput
 	buffer     []byte
 	width      int16
 	height     int16
@@ -30,12 +30,12 @@ type Config struct {
 }
 
 // New creates a new PCD8544 connection. The SPI bus must already be configured.
-func New(bus drivers.SPI, dcPin, rstPin, scePin machine.Pin) *Device {
+func New(bus drivers.SPI, dcPin, rstPin, scePin pin.Output) *Device {
 	return &Device{
 		bus:    bus,
-		dcPin:  dcPin,
-		rstPin: rstPin,
-		scePin: scePin,
+		dcPin:  dcPin.Set,
+		rstPin: rstPin.Set,
+		scePin: scePin.Set,
 	}
 }
 

pin.go

@@ -0,0 +1,29 @@
+package drivers
+
+// PinOutput is hardware abstraction for a pin which outputs a
+// digital signal (high or low level).
+//
+//	// Code conversion demo: from machine.Pin to drivers.PinOutput
+//	led := machine.LED
+//	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
+//	var pin drivers.PinOutput = led.Set // Going from a machine.Pin to a drivers.PinOutput
+type PinOutput func(level bool)
+
+// High sets the underlying pin's level to high. This is equivalent to calling PinOutput(true).
+func (po PinOutput) High() {
+	po(true)
+}
+
+// Low sets the underlying pin's level to low. This is equivalent to calling PinOutput(false).
+func (po PinOutput) Low() {
+	po(false)
+}
+
+// PinInput is hardware abstraction for a pin which receives a
+// digital signal and reads it (high or low level).
+//
+//	// Code conversion demo: from machine.Pin to drivers.PinInput
+//	input := machine.LED
+//	input.Configure(machine.PinConfig{Mode: machine.PinInputPulldown}) // or use machine.PinInputPullup or machine.PinInput
+//	var pin drivers.PinInput = input.Get // Going from a machine.Pin to a drivers.PinInput
+type PinInput func() (level bool)

shiftregister/shiftregister.go

@@ -2,7 +2,9 @@
 package shiftregister
 
 import (
-	"machine"
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type NumberBit int8
@@ -16,9 +18,10 @@ const (
 
 // Device holds pin number
 type Device struct {
-	latch, clock, out machine.Pin // IC wiring
-	bits              NumberBit   // Pin number
-	mask              uint32      // keep all pins state
+	latch, clock, out drivers.PinOutput // IC wiring
+	config            func()
+	bits              NumberBit // Pin number
+	mask              uint32    // keep all pins state
 }
 
 // ShiftPin is the implementation of the ShiftPin interface.
@@ -29,20 +32,25 @@ type ShiftPin struct {
 }
 
 // New returns a new shift output register device
-func New(Bits NumberBit, Latch, Clock, Out machine.Pin) *Device {
+func New(Bits NumberBit, Latch, Clock, Out pin.Output) *Device {
 	return &Device{
-		latch: Latch,
-		clock: Clock,
-		out:   Out,
+		latch: Latch.Set,
+		clock: Clock.Set,
+		out:   Out.Set,
 		bits:  Bits,
+		config: func() {
+			legacy.ConfigurePinOut(Latch)
+			legacy.ConfigurePinOut(Clock)
+			legacy.ConfigurePinOut(Out)
+		},
 	}
 }
 
 // Configure set hardware configuration
 func (d *Device) Configure() {
-	d.latch.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.clock.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.out.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	if d.config == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
 	d.latch.High()
 }
 
@@ -53,7 +61,7 @@ func (d *Device) WriteMask(mask uint32) {
 	d.latch.Low()
 	for i := 0; i < int(d.bits); i++ {
 		d.clock.Low()
-		d.out.Set(mask&1 != 0)
+		d.out(mask&1 != 0)
 		mask = mask >> 1
 		d.clock.High()
 	}

ssd1289/pinbus.go

@@ -1,3 +1,5 @@
+//go:build baremetal
+
 package ssd1289
 
 import "machine"

ssd1289/ssd1289.go

@@ -7,6 +7,9 @@ import (
 	"image/color"
 	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 type Bus interface {
@@ -14,10 +17,10 @@ type Bus interface {
 }
 
 type Device struct {
-	rs  machine.Pin
-	wr  machine.Pin
-	cs  machine.Pin
-	rst machine.Pin
+	rs  drivers.PinOutput
+	wr  drivers.PinOutput
+	cs  drivers.PinOutput
+	rst drivers.PinOutput
 	bus Bus
 }
 
@@ -26,21 +29,20 @@ const height = int16(320)
 
 func New(rs machine.Pin, wr machine.Pin, cs machine.Pin, rst machine.Pin, bus Bus) Device {
 	d := Device{
-		rs:  rs,
-		wr:  wr,
-		cs:  cs,
-		rst: rst,
+		rs:  rs.Set,
+		wr:  wr.Set,
+		cs:  cs.Set,
+		rst: rst.Set,
 		bus: bus,
 	}
+	legacy.ConfigurePinOut(rs)
+	legacy.ConfigurePinOut(wr)
+	legacy.ConfigurePinOut(cs)
+	legacy.ConfigurePinOut(rst)
 
-	rs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	wr.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rst.Configure(machine.PinConfig{Mode: machine.PinOutput})
-
-	cs.High()
-	rst.High()
-	wr.High()
+	cs.Set(true)
+	rst.Set(true)
+	wr.Set(true)
 
 	return d
 }

ssd1306/ssd1306.go

@@ -322,6 +322,7 @@ func (b *SPIBus) tx(data []byte, isCommand bool) error {
 
 	if isCommand {
 		b.csPin.High()
+		time.Sleep(1 * time.Millisecond)
 		b.dcPin.Low()
 		b.csPin.Low()
 
@@ -329,6 +330,7 @@ func (b *SPIBus) tx(data []byte, isCommand bool) error {
 		b.csPin.High()
 	} else {
 		b.csPin.High()
+		time.Sleep(1 * time.Millisecond)
 		b.dcPin.High()
 		b.csPin.Low()
 

ssd1331/ssd1331.go

@@ -11,6 +11,7 @@ import (
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 type Model uint8
@@ -19,9 +20,9 @@ type Rotation uint8
 // Device wraps an SPI connection.
 type Device struct {
 	bus         drivers.SPI
-	dcPin       machine.Pin
-	resetPin    machine.Pin
-	csPin       machine.Pin
+	dcPin       drivers.PinOutput
+	resetPin    drivers.PinOutput
+	csPin       drivers.PinOutput
 	width       int16
 	height      int16
 	batchLength int16
@@ -37,14 +38,14 @@ type Config struct {
 
 // New creates a new SSD1331 connection. The SPI wire must already be configured.
 func New(bus drivers.SPI, resetPin, dcPin, csPin machine.Pin) Device {
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(resetPin)
+	legacy.ConfigurePinOut(csPin)
 	return Device{
 		bus:      bus,
-		dcPin:    dcPin,
-		resetPin: resetPin,
-		csPin:    csPin,
+		dcPin:    dcPin.Set,
+		resetPin: resetPin.Set,
+		csPin:    csPin.Set,
 	}
 }
 
@@ -251,7 +252,7 @@ func (d *Device) Data(data uint8) {
 
 // Tx sends data to the display
 func (d *Device) Tx(data []byte, isCommand bool) {
-	d.dcPin.Set(!isCommand)
+	d.dcPin(!isCommand)
 	d.bus.Tx(data, nil)
 }
 

ssd1351/ssd1351.go

@@ -6,10 +6,11 @@ package ssd1351 // import "tinygo.org/x/drivers/ssd1351"
 import (
 	"errors"
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 var (
@@ -19,17 +20,18 @@ var (
 
 // Device wraps an SPI connection.
 type Device struct {
-	bus          drivers.SPI
-	dcPin        machine.Pin
-	resetPin     machine.Pin
-	csPin        machine.Pin
-	enPin        machine.Pin
-	rwPin        machine.Pin
-	width        int16
-	height       int16
-	rowOffset    int16
-	columnOffset int16
-	bufferLength int16
+	bus           drivers.SPI
+	dcPin         drivers.PinOutput
+	resetPin      drivers.PinOutput
+	csPin         drivers.PinOutput
+	enPin         drivers.PinOutput
+	rwPin         drivers.PinOutput
+	configurePins func()
+	width         int16
+	height        int16
+	rowOffset     int16
+	columnOffset  int16
+	bufferLength  int16
 }
 
 // Config is the configuration for the display
@@ -41,19 +43,29 @@ type Config struct {
 }
 
 // New creates a new SSD1351 connection. The SPI wire must already be configured.
-func New(bus drivers.SPI, resetPin, dcPin, csPin, enPin, rwPin machine.Pin) Device {
+func New(bus drivers.SPI, resetPin, dcPin, csPin, enPin, rwPin pin.Output) Device {
 	return Device{
 		bus:      bus,
-		dcPin:    dcPin,
-		resetPin: resetPin,
-		csPin:    csPin,
-		enPin:    enPin,
-		rwPin:    rwPin,
+		dcPin:    dcPin.Set,
+		resetPin: resetPin.Set,
+		csPin:    csPin.Set,
+		enPin:    enPin.Set,
+		rwPin:    rwPin.Set,
+		configurePins: func() {
+			legacy.ConfigurePinOut(dcPin)
+			legacy.ConfigurePinOut(resetPin)
+			legacy.ConfigurePinOut(csPin)
+			legacy.ConfigurePinOut(enPin)
+			legacy.ConfigurePinOut(rwPin)
+		},
 	}
 }
 
 // Configure initializes the display with default configuration
 func (d *Device) Configure(cfg Config) {
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
 	if cfg.Width == 0 {
 		cfg.Width = 128
 	}
@@ -73,11 +85,7 @@ func (d *Device) Configure(cfg Config) {
 	}
 
 	// configure GPIO pins
-	d.dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.enPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.rwPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	d.configurePins()
 
 	// reset the device
 	d.resetPin.High()
@@ -278,7 +286,7 @@ func (d *Device) Data(data uint8) {
 
 // Tx sends data to the display
 func (d *Device) Tx(data []byte, isCommand bool) {
-	d.dcPin.Set(!isCommand)
+	d.dcPin(!isCommand)
 	d.csPin.Low()
 	d.bus.Tx(data, nil)
 	d.csPin.High()

st7735/st7735.go

@@ -5,12 +5,13 @@ package st7735 // import "tinygo.org/x/drivers/st7735"
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"errors"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 	"tinygo.org/x/drivers/pixel"
 )
 
@@ -39,10 +40,10 @@ type Device = DeviceOf[pixel.RGB565BE]
 // formats.
 type DeviceOf[T Color] struct {
 	bus          drivers.SPI
-	dcPin        machine.Pin
-	resetPin     machine.Pin
-	csPin        machine.Pin
-	blPin        machine.Pin
+	dcPin        drivers.PinOutput
+	resetPin     drivers.PinOutput
+	csPin        drivers.PinOutput
+	blPin        drivers.PinOutput
 	width        int16
 	height       int16
 	columnOffset int16
@@ -65,23 +66,23 @@ type Config struct {
 }
 
 // New creates a new ST7735 connection. The SPI wire must already be configured.
-func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) Device {
+func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin pin.Output) Device {
 	return NewOf[pixel.RGB565BE](bus, resetPin, dcPin, csPin, blPin)
 }
 
 // NewOf creates a new ST7735 connection with a particular pixel format. The SPI
 // wire must already be configured.
-func NewOf[T Color](bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) DeviceOf[T] {
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	blPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+func NewOf[T Color](bus drivers.SPI, resetPin, dcPin, csPin, blPin pin.Output) DeviceOf[T] {
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(resetPin)
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(blPin)
 	return DeviceOf[T]{
 		bus:      bus,
-		dcPin:    dcPin,
-		resetPin: resetPin,
-		csPin:    csPin,
-		blPin:    blPin,
+		dcPin:    dcPin.Set,
+		resetPin: resetPin.Set,
+		csPin:    csPin.Set,
+		blPin:    blPin.Set,
 	}
 }
 
@@ -423,7 +424,7 @@ func (d *DeviceOf[T]) Data(data uint8) {
 
 // Tx sends data to the display
 func (d *DeviceOf[T]) Tx(data []byte, isCommand bool) {
-	d.dcPin.Set(!isCommand)
+	d.dcPin(!isCommand)
 	d.bus.Tx(data, nil)
 }
 

st7789/st7789.go

@@ -7,13 +7,14 @@ package st7789 // import "tinygo.org/x/drivers/st7789"
 
 import (
 	"image/color"
-	"machine"
 	"math"
 	"time"
 
 	"errors"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 	"tinygo.org/x/drivers/pixel"
 )
 
@@ -46,10 +47,10 @@ type Device = DeviceOf[pixel.RGB565BE]
 // formats.
 type DeviceOf[T Color] struct {
 	bus             drivers.SPI
-	dcPin           machine.Pin
-	resetPin        machine.Pin
-	csPin           machine.Pin
-	blPin           machine.Pin
+	dcPin           drivers.PinOutput
+	resetPin        drivers.PinOutput
+	csPin           drivers.PinOutput
+	blPin           drivers.PinOutput
 	width           int16
 	height          int16
 	columnOffsetCfg int16
@@ -83,23 +84,27 @@ type Config struct {
 }
 
 // New creates a new ST7789 connection. The SPI wire must already be configured.
-func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) Device {
+func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin pin.Output) Device {
 	return NewOf[pixel.RGB565BE](bus, resetPin, dcPin, csPin, blPin)
 }
 
 // NewOf creates a new ST7789 connection with a particular pixel format. The SPI
 // wire must already be configured.
-func NewOf[T Color](bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) DeviceOf[T] {
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	blPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+func NewOf[T Color](bus drivers.SPI, resetPin, dcPin, csPin, blPin pin.Output) DeviceOf[T] {
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(resetPin)
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(blPin)
+	var cs drivers.PinOutput
+	if !legacy.PinIsNoPin(csPin) {
+		cs = csPin.Set
+	}
 	return DeviceOf[T]{
 		bus:      bus,
-		dcPin:    dcPin,
-		resetPin: resetPin,
-		csPin:    csPin,
-		blPin:    blPin,
+		dcPin:    dcPin.Set,
+		resetPin: resetPin.Set,
+		csPin:    cs,
+		blPin:    blPin.Set,
 	}
 }
 
@@ -229,7 +234,7 @@ func (d *DeviceOf[T]) sendCommand(command uint8, data []byte) error {
 // startWrite must be called at the beginning of all exported methods to set the
 // chip select pin low.
 func (d *DeviceOf[T]) startWrite() {
-	if d.csPin != machine.NoPin {
+	if d.csPin != nil {
 		d.csPin.Low()
 	}
 }
@@ -237,7 +242,7 @@ func (d *DeviceOf[T]) startWrite() {
 // endWrite must be called at the end of all exported methods to set the chip
 // select pin high.
 func (d *DeviceOf[T]) endWrite() {
-	if d.csPin != machine.NoPin {
+	if d.csPin != nil {
 		d.csPin.High()
 	}
 }

sx127x/sx127x.go

@@ -6,10 +6,10 @@ package sx127x
 
 import (
 	"errors"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/pin"
 	"tinygo.org/x/drivers/lora"
 )
 
@@ -22,7 +22,7 @@ const (
 // Device wraps an SPI connection to a SX127x device.
 type Device struct {
 	spi            drivers.SPI          // SPI bus for module communication
-	rstPin         machine.Pin          // GPIO for reset
+	rstPin         drivers.PinOutput    // GPIO for reset
 	radioEventChan chan lora.RadioEvent // Channel for Receiving events
 	loraConf       lora.Config          // Current Lora configuration
 	controller     RadioController      // to manage interactions with the radio
@@ -43,10 +43,10 @@ func (d *Device) GetRadioEventChan() chan lora.RadioEvent {
 }
 
 // New creates a new SX127x connection. The SPI bus must already be configured.
-func New(spi drivers.SPI, rstPin machine.Pin) *Device {
+func New(spi drivers.SPI, rstPin pin.Output) *Device {
 	k := Device{
 		spi:            spi,
-		rstPin:         rstPin,
+		rstPin:         rstPin.Set,
 		radioEventChan: make(chan lora.RadioEvent, RADIOEVENTCHAN_SIZE),
 		spiTxBuf:       make([]byte, SPI_BUFFER_SIZE),
 		spiRxBuf:       make([]byte, SPI_BUFFER_SIZE),

tmc2209/uartcomm.go

@@ -57,10 +57,14 @@ func (comm *UARTComm) WriteRegister(register uint8, value uint32, driverIndex ui
 		byte((value >> 16) & 0xFF), // Middle byte
 		byte((value >> 8) & 0xFF),  // Next byte
 		byte(value & 0xFF),         // LSB of value
-		0,                          // CRC
 	}
 
-	buffer[7] = CalculateCRC(buffer[:7])
+	// Calculate checksum by XORing all bytes
+	checksum := byte(0)
+	for _, b := range buffer[:7] {
+		checksum ^= b
+	}
+	buffer[7] = checksum // Set checksum byte
 
 	// Write the data to the TMC2209
 	done := make(chan error, 1)
@@ -82,10 +86,10 @@ func (comm *UARTComm) WriteRegister(register uint8, value uint32, driverIndex ui
 // ReadRegister sends a register read command to the TMC2209 with a timeout.
 func (comm *UARTComm) ReadRegister(register uint8, driverIndex uint8) (uint32, error) {
 	var writeBuffer [4]byte
-	writeBuffer[0] = 0x05            // Sync byte
-	writeBuffer[1] = 0x00            // Slave address
-	writeBuffer[2] = register & 0x7F // Read command (MSB clear for read)
-	writeBuffer[3] = CalculateCRC(writeBuffer[:3])
+	writeBuffer[0] = 0x05                                             // Sync byte
+	writeBuffer[1] = 0x00                                             // Slave address
+	writeBuffer[2] = register & 0x7F                                  // Read command (MSB clear for read)
+	writeBuffer[3] = writeBuffer[0] ^ writeBuffer[1] ^ writeBuffer[2] // Checksum
 
 	// Send the read command
 	done := make(chan []byte, 1)
@@ -99,7 +103,11 @@ func (comm *UARTComm) ReadRegister(register uint8, driverIndex uint8) (uint32, e
 	// Implementing timeout using a 100ms timer
 	select {
 	case readBuffer := <-done:
-		checksum := CalculateCRC(readBuffer[:7])
+		// Validate checksum
+		checksum := byte(0)
+		for i := 0; i < 7; i++ {
+			checksum ^= readBuffer[i]
+		}
 		if checksum != readBuffer[7] {
 			return 0, CustomError("checksum error")
 		}

uc8151/uc8151.go

@@ -8,10 +8,11 @@ package uc8151 // import "tinygo.org/x/drivers/uc8151"
 import (
 	"errors"
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 	"tinygo.org/x/drivers/pixel"
 )
 
@@ -31,10 +32,10 @@ type Config struct {
 
 type Device struct {
 	bus                      drivers.SPI
-	cs                       machine.Pin
-	dc                       machine.Pin
-	rst                      machine.Pin
-	busy                     machine.Pin
+	cs                       drivers.PinOutput
+	dc                       drivers.PinOutput
+	rst                      drivers.PinOutput
+	isBusy                   drivers.PinInput
 	width                    int16
 	height                   int16
 	buffer                   []uint8
@@ -49,17 +50,17 @@ type Device struct {
 type Speed uint8
 
 // New returns a new uc8151 driver. Pass in a fully configured SPI bus.
-func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+func New(bus drivers.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(rstPin)
+	legacy.ConfigurePinInput(busyPin)
 	return Device{
-		bus:  bus,
-		cs:   csPin,
-		dc:   dcPin,
-		rst:  rstPin,
-		busy: busyPin,
+		bus:    bus,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
 	}
 }
 
@@ -313,14 +314,14 @@ func (d *Device) ClearDisplay() {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for !d.busy.Get() {
+	for !d.isBusy() {
 		time.Sleep(10 * time.Millisecond)
 	}
 }
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

version.go

@@ -2,4 +2,4 @@ package drivers
 
 // Version returns a user-readable string showing the version of the drivers package for support purposes.
 // Update this value before release of new version of software.
-const Version = "0.32.0"
+const Version = "0.30.0"

waveshare-epd/epd1in54/epd1in54.go

@@ -12,6 +12,10 @@ import (
 	"image/color"
 	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Config struct {
@@ -22,14 +26,14 @@ type Config struct {
 }
 
 type Device struct {
-	bus  *machine.SPI
-	cs   machine.Pin
-	dc   machine.Pin
-	rst  machine.Pin
-	busy machine.Pin
-
-	buffer   []uint8
-	rotation Rotation
+	bus           *machine.SPI
+	cs            drivers.PinOutput
+	dc            drivers.PinOutput
+	rst           drivers.PinOutput
+	isBusy        drivers.PinInput
+	configurePins func()
+	buffer        []uint8
+	rotation      Rotation
 }
 
 type Rotation uint8
@@ -79,22 +83,28 @@ var partialRefresh = [159]uint8{
 }
 
 // New returns a new epd1in54 driver. Pass in a fully configured SPI bus.
-func New(bus *machine.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
+func New(bus *machine.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
 	return Device{
 		buffer: make([]uint8, (uint32(Width)*uint32(Height))/8),
 		bus:    bus,
-		cs:     csPin,
-		dc:     dcPin,
-		rst:    rstPin,
-		busy:   busyPin,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
+		configurePins: func() {
+			legacy.ConfigurePinOut(csPin)
+			legacy.ConfigurePinOut(dcPin)
+			legacy.ConfigurePinOut(rstPin)
+			legacy.ConfigurePinInput(busyPin)
+		},
 	}
 }
 
 func (d *Device) LDirInit(cfg Config) {
-	d.cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.rst.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.dc.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.busy.Configure(machine.PinConfig{Mode: machine.PinInput})
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.configurePins()
 
 	d.bus.Configure(machine.SPIConfig{
 		Frequency: 2000000,
@@ -150,10 +160,10 @@ func (d *Device) LDirInit(cfg Config) {
 }
 
 func (d *Device) HDirInit(cfg Config) {
-	d.cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.rst.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.dc.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.busy.Configure(machine.PinConfig{Mode: machine.PinInput})
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.configurePins()
 
 	d.bus.Configure(machine.SPIConfig{
 		Frequency: 2000000,
@@ -369,7 +379,7 @@ func (d *Device) Clear() {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for d.busy.Get() {
+	for d.isBusy() {
 		time.Sleep(100 * time.Millisecond)
 	}
 	time.Sleep(200 * time.Millisecond)
@@ -377,7 +387,7 @@ func (d *Device) WaitUntilIdle() {
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

waveshare-epd/epd2in13/epd2in13.go

@@ -6,10 +6,11 @@ package epd2in13 // import "tinygo.org/x/drivers/waveshare-epd/epd2in13"
 import (
 	"errors"
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Config struct {
@@ -21,10 +22,10 @@ type Config struct {
 
 type Device struct {
 	bus          drivers.SPI
-	cs           machine.Pin
-	dc           machine.Pin
-	rst          machine.Pin
-	busy         machine.Pin
+	cs           drivers.PinOutput
+	dc           drivers.PinOutput
+	rst          drivers.PinOutput
+	isBusy       drivers.PinInput
 	logicalWidth int16
 	width        int16
 	height       int16
@@ -53,17 +54,17 @@ var lutPartialUpdate = [30]uint8{
 }
 
 // New returns a new epd2in13x driver. Pass in a fully configured SPI bus.
-func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+func New(bus drivers.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(rstPin)
+	legacy.ConfigurePinInput(busyPin)
 	return Device{
-		bus:  bus,
-		cs:   csPin,
-		dc:   dcPin,
-		rst:  rstPin,
-		busy: busyPin,
+		bus:    bus,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
 	}
 }
 
@@ -298,14 +299,14 @@ func (d *Device) setMemoryPointer(x int16, y int16) {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for d.busy.Get() {
+	for d.isBusy() {
 		time.Sleep(100 * time.Millisecond)
 	}
 }
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

waveshare-epd/epd2in13x/epd2in13x.go

@@ -6,10 +6,11 @@ package epd2in13x // import "tinygo.org/x/drivers/waveshare-epd/epd2in13x"
 import (
 	"errors"
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Config struct {
@@ -20,10 +21,10 @@ type Config struct {
 
 type Device struct {
 	bus          drivers.SPI
-	cs           machine.Pin
-	dc           machine.Pin
-	rst          machine.Pin
-	busy         machine.Pin
+	cs           drivers.PinOutput
+	dc           drivers.PinOutput
+	rst          drivers.PinOutput
+	isBusy       drivers.PinInput
 	width        int16
 	height       int16
 	buffer       [][]uint8
@@ -33,17 +34,17 @@ type Device struct {
 type Color uint8
 
 // New returns a new epd2in13x driver. Pass in a fully configured SPI bus.
-func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+func New(bus drivers.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(rstPin)
+	legacy.ConfigurePinInput(busyPin)
 	return Device{
-		bus:  bus,
-		cs:   csPin,
-		dc:   dcPin,
-		rst:  rstPin,
-		busy: busyPin,
+		bus:    bus,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
 	}
 }
 
@@ -277,14 +278,14 @@ func (d *Device) ClearDisplay() {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for !d.busy.Get() {
+	for !d.isBusy() {
 		time.Sleep(100 * time.Millisecond)
 	}
 }
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

waveshare-epd/epd2in66b/dev.go

@@ -5,7 +5,6 @@ package epd2in66b
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
@@ -18,19 +17,12 @@ const (
 
 const Baudrate = 4_000_000 // 4 MHz
 
-type Config struct {
-	ResetPin      machine.Pin
-	DataPin       machine.Pin
-	ChipSelectPin machine.Pin
-	BusyPin       machine.Pin
-}
-
 type Device struct {
-	bus  drivers.SPI
-	cs   machine.Pin
-	dc   machine.Pin
-	rst  machine.Pin
-	busy machine.Pin
+	bus    drivers.SPI
+	cs     drivers.PinOutput
+	dc     drivers.PinOutput
+	rst    drivers.PinOutput
+	isBusy drivers.PinInput
 
 	blackBuffer []byte
 	redBuffer   []byte
@@ -50,21 +42,6 @@ func New(bus drivers.SPI) Device {
 	}
 }
 
-// Configure configures the device and its pins.
-func (d *Device) Configure(c Config) error {
-	d.cs = c.ChipSelectPin
-	d.dc = c.DataPin
-	d.rst = c.ResetPin
-	d.busy = c.BusyPin
-
-	d.cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.dc.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.rst.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.busy.Configure(machine.PinConfig{Mode: machine.PinInput})
-
-	return nil
-}
-
 func (d *Device) Size() (x, y int16) {
 	return displayWidth, displayHeight
 }
@@ -229,7 +206,7 @@ func (d *Device) WaitUntilIdle() {
 	// give it some time to get busy
 	time.Sleep(50 * time.Millisecond)
 
-	for d.busy.Get() { // high = busy
+	for d.isBusy() { // high = busy
 		time.Sleep(10 * time.Millisecond)
 	}
 

waveshare-epd/epd2in66b/dev_baremetal.go

@@ -0,0 +1,30 @@
+//go:build baremetal
+
+package epd2in66b
+
+import "machine"
+
+type Config struct {
+	ResetPin      machine.Pin
+	DataPin       machine.Pin
+	ChipSelectPin machine.Pin
+	BusyPin       machine.Pin
+}
+
+// Configure configures the device and its pins.
+func (d *Device) Configure(c Config) error {
+	cs := c.ChipSelectPin
+	dc := c.DataPin
+	rst := c.ResetPin
+	busy := c.BusyPin
+
+	cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	dc.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	rst.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	busy.Configure(machine.PinConfig{Mode: machine.PinInput})
+	d.cs = cs.Set
+	d.dc = dc.Set
+	d.rst = rst.Set
+	d.isBusy = busy.Get
+	return nil
+}

waveshare-epd/epd2in9/epd2in9.go

@@ -13,10 +13,11 @@ package epd2in9 // import "tinygo.org/x/drivers/waveshare-epd/epd2in9"
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Config struct {
@@ -28,10 +29,10 @@ type Config struct {
 
 type Device struct {
 	bus          drivers.SPI
-	cs           machine.Pin
-	dc           machine.Pin
-	rst          machine.Pin
-	busy         machine.Pin
+	cs           drivers.PinOutput
+	dc           drivers.PinOutput
+	rst          drivers.PinOutput
+	isBusy       drivers.PinInput
 	logicalWidth int16
 	width        int16
 	height       int16
@@ -61,17 +62,17 @@ var lutPartialUpdate = [30]uint8{
 }
 
 // New returns a new epd2in9 driver. Pass in a fully configured SPI bus.
-func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+func New(bus drivers.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(rstPin)
+	legacy.ConfigurePinInput(busyPin)
 	return Device{
-		bus:  bus,
-		cs:   csPin,
-		dc:   dcPin,
-		rst:  rstPin,
-		busy: busyPin,
+		bus:    bus,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
 	}
 }
 
@@ -245,14 +246,14 @@ func (d *Device) setMemoryPointer(x int16, y int16) {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for d.busy.Get() {
+	for d.isBusy() {
 		time.Sleep(100 * time.Millisecond)
 	}
 }
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

waveshare-epd/epd4in2/epd4in2.go

@@ -10,10 +10,11 @@ package epd4in2
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+	"tinygo.org/x/drivers/internal/pin"
 )
 
 type Config struct {
@@ -25,10 +26,10 @@ type Config struct {
 
 type Device struct {
 	bus          drivers.SPI
-	cs           machine.Pin
-	dc           machine.Pin
-	rst          machine.Pin
-	busy         machine.Pin
+	cs           drivers.PinOutput
+	dc           drivers.PinOutput
+	rst          drivers.PinOutput
+	isBusy       drivers.PinInput
 	logicalWidth int16
 	width        int16
 	height       int16
@@ -40,17 +41,17 @@ type Device struct {
 type Rotation uint8
 
 // New returns a new epd4in2 driver. Pass in a fully configured SPI bus.
-func New(bus drivers.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	rstPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	busyPin.Configure(machine.PinConfig{Mode: machine.PinInput})
+func New(bus drivers.SPI, csPin, dcPin, rstPin pin.Output, busyPin pin.Input) Device {
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(rstPin)
+	legacy.ConfigurePinInput(busyPin)
 	return Device{
-		bus:  bus,
-		cs:   csPin,
-		dc:   dcPin,
-		rst:  rstPin,
-		busy: busyPin,
+		bus:    bus,
+		cs:     csPin.Set,
+		dc:     dcPin.Set,
+		rst:    rstPin.Set,
+		isBusy: busyPin.Get,
 	}
 }
 
@@ -311,14 +312,14 @@ func (d *Device) ClearDisplay() {
 
 // WaitUntilIdle waits until the display is ready
 func (d *Device) WaitUntilIdle() {
-	for d.busy.Get() {
+	for d.isBusy() {
 		time.Sleep(100 * time.Millisecond)
 	}
 }
 
 // IsBusy returns the busy status of the display
 func (d *Device) IsBusy() bool {
-	return d.busy.Get()
+	return d.isBusy()
 }
 
 // ClearBuffer sets the buffer to 0xFF (white)

ws2812/ws2812-asm_cortexm.go

@@ -1320,465 +1320,6 @@ void ws2812_writeByte168(char c, uint32_t *portSet, uint32_t *portClear, uint32_
 	  [maskClear]"r"(maskClear),
 	  [portClear]"m"(*portClear));
 }
-
-__attribute__((always_inline))
-void ws2812_writeByte200(char c, uint32_t *portSet, uint32_t *portClear, uint32_t maskSet, uint32_t maskClear) {
-	// Timings:
-	// T0H: 70 - 72 cycles or 350.0ns - 360.0ns
-	// T1H: 210 - 212 cycles or 1050.0ns - 1060.0ns
-	// TLD: 230 -    cycles or 1150.0ns -
-	uint32_t value = (uint32_t)c << 24;
-	char i = 8;
-	__asm__ __volatile__(
-		"1: @ send_bit\n"
-		"\t  str   %[maskSet], %[portSet]     @ [2]   T0H and T0L start here\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  lsls  %[value], #1               @ [1]\n"
-		"\t  bcs.n 2f                         @ [1/3] skip_store\n"
-		"\t  str   %[maskClear], %[portClear] @ [2]   T0H -> T0L transition\n"
-		"\t2: @ skip_store\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  str   %[maskClear], %[portClear] @ [2]   T1H -> T1L transition\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  nop\n"
-		"\t  subs  %[i], #1                   @ [1]\n"
-		"\t  beq.n 3f                         @ [1/3] end\n"
-		"\t  b     1b                         @ [1/3] send_bit\n"
-		"\t3: @ end\n"
-	: [value]"+r"(value),
-	  [i]"+r"(i)
-	: [maskSet]"r"(maskSet),
-	  [portSet]"m"(*portSet),
-	  [maskClear]"r"(maskClear),
-	  [portClear]"m"(*portClear));
-}
 */
 import "C"
 
@@ -1841,13 +1382,3 @@ func (d Device) writeByte168(c byte) {
 
 	interrupt.Restore(mask)
 }
-
-func (d Device) writeByte200(c byte) {
-	portSet, maskSet := d.Pin.PortMaskSet()
-	portClear, maskClear := d.Pin.PortMaskClear()
-
-	mask := interrupt.Disable()
-	C.ws2812_writeByte200(C.char(c), (*C.uint32_t)(unsafe.Pointer(portSet)), (*C.uint32_t)(unsafe.Pointer(portClear)), C.uint32_t(maskSet), C.uint32_t(maskClear))
-
-	interrupt.Restore(mask)
-}

ws2812/ws2812.go

@@ -1,7 +1,7 @@
 // Package ws2812 implements a driver for WS2812 and SK6812 RGB LED strips.
 package ws2812 // import "tinygo.org/x/drivers/ws2812"
 
-//go:generate go run gen-ws2812.go -arch=cortexm 16 48 64 120 125 168 200
+//go:generate go run gen-ws2812.go -arch=cortexm 16 48 64 120 125 168
 //go:generate go run gen-ws2812.go -arch=tinygoriscv 160 320
 
 import (

ws2812/ws2812_cortexm.go

@@ -28,15 +28,12 @@ func (d Device) WriteByte(c byte) error {
 	case 120_000_000: // 120MHz
 		d.writeByte120(c)
 		return nil
-	case 125_000_000: // 125 MHz e.g. rp2040 originally
+	case 125_000_000: // 125 MHz e.g. rp2040
 		d.writeByte125(c)
 		return nil
 	case 168_000_000: // 168MHz, e.g. stm32f405
 		d.writeByte168(c)
 		return nil
-	case 200_000_000: // 200MHz, e.g. rp2040 starting with TinyGo v0.37
-		d.writeByte200(c)
-		return nil
 	default:
 		return errUnknownClockSpeed
 	}