feature: some additional changes to drivers.Pin HAL for clarity and readability.

Signed-off-by: deadprogram <ron@hybridgroup.com>

.github/FUNDING.yml

@@ -0,0 +1,2 @@
+# These are supported funding model platforms
+open_collective: tinygo

CHANGELOG.md

@@ -1,3 +1,163 @@
+0.33.0
+---
+- **new devices**
+    - **ens160**
+        - Add ens160 i2c driver
+    - **lsm303dlhc**
+        - added support for LSM303DLHC e-Compass; (#783)
+    - **seesaw**
+        - add support for Adafruit Seesaw encoders
+
+- **enhancements**
+    - **ws2812**
+        - add RP2350 support
+    - **ssd1306**
+        - avoid unnecessary heap allocations (#767)
+    - **gps**
+        - allow gps init with address
+    - **lsm6ds3tr**
+        - avoid unnecessary heap allocations (#766)
+
+- **bugfixes**
+    - **gps**
+        - Fix gps time calculation (#785)
+
+
+0.32.0
+---
+- **enhancements**
+    - **bmp280**
+        - remove alloc on read sensor data
+    - **ws2812**
+        - add 200MHz support for the Cortex-M0/rp2040
+
+- **bugfixes**
+    - **ssd1306**
+        - remove time.Sleep from SSD1306 SPI transfer code
+    - **tmc2209**
+        - tmc2209 bug fixes (#755)
+
+- **docs**
+    - **contributing**
+        - add driver design pointer to CONTRIBUTING.md
+
+
+0.31.0
+---
+---
+- **enhancements**
+    - **spi**
+        - update all SPI usage to use either *machine.SPI or drivers.SPI
+
+
+0.30.0
+---
+- **new devices**
+    - **comboat**
+        - Add wifi driver comboat for Elecrow W5 rp2040 and rp2350 devices (#741)
+    - **max6675**
+        - Add MAX6675 device
+    - **TMC2209**
+        - Added TMC2209 support (#727)
+    - **TMC5160**
+        - Added TMC5160 support (#725)
+    - **sharpmem**
+        - Add sharpmem (#724)
+
+- **enhancements**
+    - **net**
+        - move to latest golang.org/x/net v0.33.0 (#732)
+    - **microphone**
+        - update microphone driver to use latest i2s interface
+
+- **bugfixes**
+    - **net**
+        - fix typo in DHCP error message
+    - **aht20**
+        - Fixed bug in aht20 driver
+    - **hub75**
+        - fix data buffering
+
+
+0.29.0
+---
+- **new devices**
+    - **epd1in54**
+        - Waveshare 1.54inch B/W e-Paper display (#704)
+    - **touch**
+        - add capacitive touch sensing on normal GPIO pins
+    - **INA219**
+        - I2C INA219 driver (#705)
+    - **pcf8591**
+        - add ADC only implementation for I2C ADC/DAC (#690)
+
+- **enhancements**
+    - **pixel**
+        - add NewImageFromBytes() function to allow creating image from existing slice
+    - **servo**
+        - Add function `SetAngleWithMicroseconds` (#695)
+    - **onewire**
+        - onewire improvements
+    - **ssd1306**
+        - Add function `SetFlip` and `GetFlip` (#702)
+    - **uc8151**
+        - add FillRectangle() and SetScroll() functions to satisfy tinyterm.Displayer interface
+    - **ssd1306**
+        - add FillRectangle() and SetScroll() functions to satisfy tinyterm.Displayer interface
+
+- **bugfixes**
+    - **pixel**
+        - fix Monochrome setPixel
+
+- **docs**
+    - **readme**
+        - discuss need to change variables in examples
+    - **sponsor**
+        - Add sponsor button to key repositories
+
+
+0.28.0
+---
+- **new devices**
+    - **epd2in66b**
+        - Waveshare 2.66inch E-Paper Display Module (B) for Raspberry Pi Pico (#673)
+    - **mcp9808**
+        - Add driver for MCP9808 i2c temperature sensor (#676)
+
+- **enhancements**
+    - **encoders**
+        - add atsamd21, atsamd51, atsame5x
+    - **pixel**
+        - add support for Monochrome types such as the SSD1306 display
+    - **rtl8720dn**
+        - implement ConnectModeAP
+    - **servo**
+        - add function SetAngle() to simplify API for most common use case
+    - **ssd1306**
+        - add DrawBitmap() function to complete Displayer interface
+        - add rotation functions for Displayer interface
+        - add Sleep() function for Displayer interface
+    - **uc8151**
+        - improvements to speed and also add flicker-free mode based on @antirez code example
+        - update to support all functions needed by tinygl and board package Displayer interface
+    - **wifinina**
+        - implement ConnectModeAP
+
+- **bugfixes**
+    - **ft6336**
+        - ignore bogus touch events
+    - **pixel**
+        - fix Image[Monochrome].Set for larger images
+    - **uc8151**
+        - correct DrawBitmap() also refactor SendCommand() and SendData() for clarity
+    - **ws2812**
+        - Fix typo and move initialization of neo to init()
+
+- **examples**
+    - **ws2812**
+        - Simplify examples/ws2812
+
+
 0.27.0
 ---
 - **core**

CONTRIBUTING.md

@@ -8,6 +8,9 @@ We would like your help to make this project better, so we appreciate any contri
 
 We'd love to get your feedback on getting started with TinyGo. Run into any difficulty, confusion, or anything else? You are not alone. We want to know about your experience, so we can help the next people. Please open a Github issue with your questions, or you can also get in touch directly with us on our Slack channel at [https://gophers.slack.com/messages/CDJD3SUP6](https://gophers.slack.com/messages/CDJD3SUP6).
 
+### Driver design
+Before porting or writing a driver from scratch please read **[Driver Design for TinyGo](https://tinygo.org/docs/guides/driver-design)**.
+
 ### One of the TinyGo drivers is not working as you expect
 
 Please open a Github issue with your problem, and we will be happy to assist.

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2018-2024 The TinyGo Authors. All rights reserved.
+Copyright (c) 2018-2025 The TinyGo Authors. All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are

Makefile

@@ -19,7 +19,7 @@ rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst
 # Recursively find all *_test.go files from cwd & reduce to unique dir names
 HAS_TESTS = $(sort $(dir $(call rwildcard,,*_test.go)))
 # Exclude anything we explicitly don't want to test for whatever reason
-EXCLUDE_TESTS = image
+EXCLUDE_TESTS = image waveshare-epd/epd2in66b
 TESTS = $(filter-out $(addsuffix /%,$(EXCLUDE_TESTS)),$(HAS_TESTS))
 
 unit-test:

README.md

@@ -3,7 +3,7 @@
 [![PkgGoDev](https://pkg.go.dev/badge/tinygo.org/x/drivers)](https://pkg.go.dev/tinygo.org/x/drivers) [![Build](https://github.com/tinygo-org/drivers/actions/workflows/build.yml/badge.svg?branch=dev)](https://github.com/tinygo-org/drivers/actions/workflows/build.yml)
 
 
-This package provides a collection of 102 different hardware drivers for devices such as sensors and displays that can be used together with [TinyGo](https://tinygo.org).
+This package provides a collection of over 100 different hardware drivers for devices such as sensors, displays, wireless adaptors, and actuators, that can be used together with [TinyGo](https://tinygo.org).
 
 For the complete list, please see:
 https://tinygo.org/docs/reference/devices/
@@ -16,7 +16,7 @@ go get tinygo.org/x/drivers
 
 ## How to use
 
-Here is an example in TinyGo that uses the BMP180 digital barometer:
+Here is an example in TinyGo that uses the BMP180 digital barometer.  This example should work on any board that supports I2C:
 
 ```go
 package main
@@ -53,6 +53,28 @@ func main() {
 }
 ```
 
+## Examples Using GPIO or SPI 
+
+If compiling these examples directly you are likely to need to make minor changes to the defined variables to map the pins for the board you are using.  For example, this block in main.go:
+
+```golang
+var (
+        spi   = machine.SPI0
+        csPin = machine.D5
+)
+```
+
+It might not be obvious, but you need to change these to match how you wired your specific board.  Constants are [defined for each supported microcontroller](https://tinygo.org/docs/reference/microcontrollers/).  
+
+For example, to change the definitions for use on a Raspberry Pi Pico using typical wiring, you might need to do this:
+
+```golang
+var (
+        spi   = machine.SPI0
+        csPin = machine.GP17
+)
+```
+
 ## Contributing
 
 Your contributions are welcome!

aht20/aht20.go

@@ -29,7 +29,7 @@ func New(bus drivers.I2C) Device {
 func (d *Device) Configure() {
 	// Check initialization state
 	status := d.Status()
-	if status&0x08 == 1 {
+	if status&STATUS_CALIBRATED == 1 {
 		// Device is initialized
 		return
 	}
@@ -69,7 +69,7 @@ func (d *Device) Read() error {
 		}
 
 		// If measurement complete, store values
-		if data[0]&0x04 != 0 && data[0]&0x80 == 0 {
+		if data[0]&STATUS_CALIBRATED != 0 && data[0]&STATUS_BUSY == 0 {
 			d.humidity = uint32(data[1])<<12 | uint32(data[2])<<4 | uint32(data[3])>>4
 			d.temp = (uint32(data[3])&0xF)<<16 | uint32(data[4])<<8 | uint32(data[5])
 			return nil

apa102/apa102.go

@@ -5,9 +5,9 @@ package apa102 // import "tinygo.org/x/drivers/apa102"
 
 import (
 	"image/color"
-	"machine"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 const (
@@ -37,8 +37,11 @@ func New(b drivers.SPI) *Device {
 
 // NewSoftwareSPI returns a new APA102 driver that will use a software based
 // implementation of the SPI protocol.
-func NewSoftwareSPI(sckPin, sdoPin machine.Pin, delay uint32) *Device {
-	return New(&bbSPI{SCK: sckPin, SDO: sdoPin, Delay: delay})
+func NewSoftwareSPI(sckPin, sdoPin drivers.PinOutput, delay uint32) *Device {
+	return New(&bbSPI{SCK: sckPin.Set, SDO: sdoPin.Set, Delay: delay, configurePins: func() {
+		legacy.ConfigurePinOut(sckPin)
+		legacy.ConfigurePinOut(sdoPin)
+	}})
 }
 
 // WriteColors writes the given RGBA color slice out using the APA102 protocol.

apa102/softspi.go

@@ -1,6 +1,9 @@
 package apa102
 
-import "machine"
+import (
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
 
 // bbSPI is a dumb bit-bang implementation of SPI protocol that is hardcoded
 // to mode 0 and ignores trying to receive data. Just enough for the APA102.
@@ -8,15 +11,18 @@ import "machine"
 // most purposes other than the APA102 package. It might be desirable to make
 // this more generic and include it in the TinyGo "machine" package instead.
 type bbSPI struct {
-	SCK   machine.Pin
-	SDO   machine.Pin
-	Delay uint32
+	SCK           drivers.PinOutputFunc
+	SDO           drivers.PinOutputFunc
+	Delay         uint32
+	configurePins func()
 }
 
 // Configure sets up the SCK and SDO pins as outputs and sets them low
 func (s *bbSPI) Configure() {
-	s.SCK.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	s.SDO.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	if s.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	s.configurePins()
 	s.SCK.Low()
 	s.SDO.Low()
 	if s.Delay == 0 {

bmi160/bmi160.go

@@ -1,31 +1,35 @@
 package bmi160
 
 import (
-	"machine"
 	"time"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // DeviceSPI is the SPI interface to a BMI160 accelerometer/gyroscope. There is
 // also an I2C interface, but it is not yet supported.
 type DeviceSPI struct {
 	// Chip select pin
-	CSB machine.Pin
+	csb drivers.PinOutputFunc
 
 	buf [7]byte
 
 	// SPI bus (requires chip select to be usable).
-	Bus drivers.SPI
+	bus           drivers.SPI
+	configurePins func()
 }
 
 // NewSPI returns a new device driver. The pin and SPI interface are not
 // touched, provide a fully configured SPI object and call Configure to start
 // using this device.
-func NewSPI(csb machine.Pin, spi drivers.SPI) *DeviceSPI {
+func NewSPI(csb drivers.PinOutput, spi drivers.SPI) *DeviceSPI {
 	return &DeviceSPI{
-		CSB: csb, // chip select
-		Bus: spi,
+		csb: csb.Set, // chip select
+		bus: spi,
+		configurePins: func() {
+			legacy.ConfigurePinOut(csb)
+		},
 	}
 }
 
@@ -33,8 +37,11 @@ func NewSPI(csb machine.Pin, spi drivers.SPI) *DeviceSPI {
 // configures the BMI160, but it does not configure the SPI interface (it is
 // assumed to be up and running).
 func (d *DeviceSPI) Configure() error {
-	d.CSB.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.CSB.High()
+	if d.configurePins == nil {
+		return legacy.ErrConfigBeforeInstantiated
+	}
+	d.configurePins()
+	d.csb.High()
 
 	// The datasheet recommends doing a register read from address 0x7F to get
 	// SPI communication going:
@@ -86,9 +93,9 @@ func (d *DeviceSPI) ReadTemperature() (temperature int32, err error) {
 	data[0] = 0x80 | reg_TEMPERATURE_0
 	data[1] = 0
 	data[2] = 0
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -123,9 +130,9 @@ func (d *DeviceSPI) ReadAcceleration() (x int32, y int32, z int32, err error) {
 	for i := 1; i < len(data); i++ {
 		data[i] = 0
 	}
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -153,9 +160,9 @@ func (d *DeviceSPI) ReadRotation() (x int32, y int32, z int32, err error) {
 	for i := 1; i < len(data); i++ {
 		data[i] = 0
 	}
-	d.CSB.Low()
-	err = d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	err = d.bus.Tx(data, data)
+	d.csb.High()
 	if err != nil {
 		return
 	}
@@ -201,9 +208,9 @@ func (d *DeviceSPI) readRegister(address uint8) uint8 {
 	data := d.buf[:2]
 	data[0] = 0x80 | address
 	data[1] = 0
-	d.CSB.Low()
-	d.Bus.Tx(data, data)
-	d.CSB.High()
+	d.csb.Low()
+	d.bus.Tx(data, data)
+	d.csb.High()
 	return data[1]
 }
 
@@ -217,7 +224,7 @@ func (d *DeviceSPI) writeRegister(address, data uint8) {
 	buf[0] = address
 	buf[1] = data
 
-	d.CSB.Low()
-	d.Bus.Tx(buf, buf)
-	d.CSB.High()
+	d.csb.Low()
+	d.bus.Tx(buf, buf)
+	d.csb.High()
 }

bmp280/bmp280.go

@@ -23,6 +23,7 @@ type Filter uint
 type Device struct {
 	bus         drivers.I2C
 	Address     uint16
+	buf         [6]byte
 	cali        calibrationCoefficients
 	Temperature Oversampling
 	Pressure    Oversampling
@@ -134,8 +135,8 @@ func (d *Device) PrintCali() {
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
 func (d *Device) ReadTemperature() (temperature int32, err error) {
-	data, err := d.readData(REG_TEMP, 3)
-	if err != nil {
+	data := d.buf[:3]
+	if err = d.readData(REG_TEMP, data); err != nil {
 		return
 	}
 
@@ -158,8 +159,8 @@ func (d *Device) ReadTemperature() (temperature int32, err error) {
 // ReadPressure returns the pressure in milli pascals (mPa).
 func (d *Device) ReadPressure() (pressure int32, err error) {
 	// First 3 bytes are Pressure, last 3 bytes are Temperature
-	data, err := d.readData(REG_PRES, 6)
-	if err != nil {
+	data := d.buf[:6]
+	if err = d.readData(REG_PRES, data); err != nil {
 		return
 	}
 
@@ -203,7 +204,7 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 }
 
 // readData reads n number of bytes of the specified register
-func (d *Device) readData(register int, n int) ([]byte, error) {
+func (d *Device) readData(register int, data []byte) error {
 	// If not in normal mode, set the mode to FORCED mode, to prevent incorrect measurements
 	// After the measurement in FORCED mode, the sensor will return to SLEEP mode
 	if d.Mode != MODE_NORMAL {
@@ -218,9 +219,7 @@ func (d *Device) readData(register int, n int) ([]byte, error) {
 	}
 
 	// Read the requested register
-	data := make([]byte, n)
-	err := legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
-	return data, err
+	return legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
 }
 
 // convert3Bytes converts three bytes to int32

buzzer/buzzer.go

@@ -2,22 +2,22 @@
 package buzzer // import "tinygo.org/x/drivers/buzzer"
 
 import (
-	"machine"
-
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 // Device wraps a GPIO connection to a buzzer.
 type Device struct {
-	pin  machine.Pin
+	pin  drivers.PinOutputFunc
 	High bool
 	BPM  float64
 }
 
 // New returns a new buzzer driver given which pin to use
-func New(pin machine.Pin) Device {
+func New(pin drivers.PinOutput) Device {
 	return Device{
-		pin:  pin,
+		pin:  pin.Set,
 		High: false,
 		BPM:  96.0,
 	}
@@ -25,14 +25,14 @@ func New(pin machine.Pin) Device {
 
 // On sets the buzzer to a high state.
 func (l *Device) On() (err error) {
-	l.pin.Set(true)
+	l.pin.High()
 	l.High = true
 	return
 }
 
 // Off sets the buzzer to a low state.
 func (l *Device) Off() (err error) {
-	l.pin.Set(false)
+	l.pin.Low()
 	l.High = false
 	return
 }

comboat/comboat.go

@@ -0,0 +1,711 @@
+// Package comboat implements WiFi driver for the Aithinker-Combo-AT WiFi
+// device found on the Elecrow W5 rp2040 and rp2350 devices.  Ths WiFi device
+// is a RTL8720d variant.  The driver interface is via AT command set over UART
+// (see reference docs below).
+//
+// NOTE: the driver doesn't support UDP/TCP server connections in STA mode,
+// currently.  UDP/TCP/TLS client connections are supported in STA mode.
+//
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/instruction/index.html
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/command-set/index.html
+// https://aithinker-combo-guide.readthedocs.io/en/latest/docs/command-examples/index.html
+
+package comboat // import "tinygo.org/x/drivers/comboat"
+
+import (
+	"bytes"
+	"errors"
+	"fmt"
+	"io"
+	"machine"
+	"net"
+	"net/netip"
+	"strconv"
+	"sync"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/netdev"
+	"tinygo.org/x/drivers/netlink"
+)
+
+type Config struct {
+	BaudRate uint32
+	Uart     *machine.UART
+	Tx       machine.Pin
+	Rx       machine.Pin
+}
+
+type socket struct {
+	protocol  int
+	id        string
+	rx        chan []byte
+	remainder []byte
+	laddr     netip.AddrPort // Set in Bind()
+}
+
+type device struct {
+	cfg     *Config
+	uart    *machine.UART
+	uartMu  sync.Mutex
+	mac     net.HardwareAddr
+	ip      netip.Addr
+	gateway netip.Addr
+	buf     [1500]byte
+	pos     int
+	last    []byte
+	ok      chan bool
+	txReady chan bool
+	accept  chan string
+	err     chan error
+	sockets [8]*socket
+	sync.Mutex
+}
+
+func NewDevice(cfg *Config) *device {
+	return &device{
+		cfg:     cfg,
+		ok:      make(chan bool),
+		txReady: make(chan bool),
+		accept:  make(chan string),
+		err:     make(chan error),
+	}
+}
+
+func logDebug(msg string) {
+	//println("[DEBUG] " + msg)
+}
+
+func logError(msg string) {
+	println("[ERROR] " + msg)
+}
+
+func split(resp []byte, part int, del, on string) string {
+	parts := bytes.Split(resp, []byte(del))
+	if part >= len(parts) {
+		return "Split parts error getting " + on
+	}
+	return string(parts[part])
+}
+
+func (d *device) getFWVersion() string {
+	return split(d.last, 1, ":", "FW version")
+}
+
+func (d *device) saveMAC() {
+	raw := split(d.last, 1, ":", "MAC")
+	if len(raw) > 11 {
+		macStr := fmt.Sprintf("%s:%s:%s:%s:%s:%s",
+			raw[0:2], raw[2:4], raw[4:6],
+			raw[6:8], raw[8:10], raw[10:12])
+		d.mac, _ = net.ParseMAC(macStr)
+	}
+}
+
+var countryCodes = map[int]string{
+	1:  "JP Japan",
+	2:  "American Samoa",
+	3:  "CA Canada",
+	4:  "US",
+	5:  "CN China",
+	6:  "Hong Kong, China",
+	7:  "Taiwan, China",
+	8:  "MO Macau, China",
+	9:  "IL Israel",
+	10: "Singapore",
+	11: "KR South Korea",
+	12: "TR Türkiye",
+	13: "AU Australia",
+	14: "ZA South Africa",
+	15: "BR Brazil",
+}
+
+func (d *device) getCountry() (code string) {
+	code = split(d.last, 1, ":", "county code")
+	codeNum, err := strconv.Atoi(code)
+	if err != nil {
+		return
+	}
+	if val, ok := countryCodes[codeNum]; ok {
+		code = val
+	}
+	return
+}
+
+func (d *device) saveIP() {
+	ipStr := split(d.last, 7, ",", "IP address")
+	gwStr := split(d.last, 8, ",", "gateway address")
+	d.ip, _ = netip.ParseAddr(ipStr)
+	d.gateway, _ = netip.ParseAddr(gwStr)
+}
+
+func (d *device) execute(cmd string, timeout int) (err error) {
+	logDebug("EXECUTE " + cmd)
+
+	d.uartMu.Lock()
+	_, err = d.uart.Write([]byte(cmd + "\r\n"))
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return
+	}
+
+	t := time.NewTicker(time.Duration(timeout) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return errors.New("Timed out")
+	case <-d.ok:
+		return
+	case err = <-d.err:
+		return
+	}
+}
+
+func (d *device) send(cmd string, timeout int) (err error) {
+	logDebug("EXECUTE " + cmd)
+
+	d.uartMu.Lock()
+	_, err = d.uart.Write([]byte(cmd + "\r\n"))
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return
+	}
+
+	t := time.NewTicker(time.Duration(timeout) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return errors.New("Timed out")
+	case <-d.txReady:
+		return
+	case err = <-d.err:
+		return
+	}
+}
+
+func (d *device) findSocket(id string) (*socket, error) {
+	for _, s := range d.sockets {
+		if s.id == id {
+			return s, nil
+		}
+	}
+	return nil, errors.New("Socket not found with id: " + id)
+}
+
+func (d *device) getSocket(sockfd int) (*socket, error) {
+	if sockfd < 0 || sockfd+1 > len(d.sockets) {
+		return nil, netdev.ErrInvalidSocketFd
+	}
+	if d.sockets[sockfd] == nil {
+		return nil, netdev.ErrInvalidSocketFd
+	}
+	return d.sockets[sockfd], nil
+}
+
+func (d *device) handle(event []byte) {
+	logDebug("GOT EVENT " + string(event))
+	switch {
+
+	// SocketDisconnect,<id>
+	case bytes.HasPrefix(event, []byte("SocketDisconnect")):
+		id := split(event, 1, ",", "SocketDisconnect")
+		s, err := d.findSocket(id)
+		if err == nil {
+			close(s.rx) // Sends io.EOF
+		}
+
+	// SocketSeed,<id>,<server id>
+	case bytes.HasPrefix(event, []byte("SocketSeed,2,1")):
+		//d.uart.Write([]byte("AT+SOCKET?" + "\r\n"))
+	}
+}
+
+func (d *device) processUART() {
+
+	if d.pos == 1 && d.buf[0] == '>' {
+		d.pos = 0
+		logDebug("GOT >")
+		d.txReady <- true
+	}
+
+	sofar := d.buf[:d.pos]
+
+	if !bytes.HasSuffix(sofar, []byte("\r\n")) {
+		return
+	}
+
+	// Strip CR/LF off end
+	sofar = sofar[:len(sofar)-2]
+
+	switch {
+
+	case bytes.HasPrefix(sofar, []byte("+EVENT:SocketDown")):
+		// +EVENT:SocketDown,<id>,<length>,<data>
+		parts := bytes.SplitN(sofar, []byte(","), 4)
+		if len(parts) != 4 {
+			logError("Error parsing +EVENT:SocketDown: " + string(sofar))
+			d.pos = 0
+			return
+		}
+		id := string(parts[1])
+		length, err := strconv.Atoi(string(parts[2]))
+		if err != nil {
+			logError("Error parsing length from: " + string(parts[2]))
+			d.pos = 0
+			return
+		}
+		if length != len(parts[3]) {
+			// This can happen if <data> actually contains a CR/LF.
+			// Return without resetting d.pos to continue reading
+			// in the full <data>.
+			return
+		}
+		s, err := d.findSocket(id)
+		if err != nil {
+			logError(err.Error())
+			d.pos = 0
+			return
+		}
+		logDebug("GOT +EVENT:SocketDown," + id + "," + string(parts[2]))
+		d.pos = 0
+		data := make([]byte, len(parts[3]))
+		copy(data, parts[3])
+		s.rx <- data
+
+	case bytes.HasPrefix(sofar, []byte("OK")):
+		d.pos = 0
+		logDebug("GOT OK")
+		d.ok <- true
+
+	case bytes.HasPrefix(sofar, []byte("ERROR")):
+		d.pos = 0
+		logDebug("GOT ERROR")
+		errStr := getErrStr(d.last)
+		d.err <- errors.New(errStr)
+
+	case bytes.HasPrefix(sofar, []byte("+EVENT:")):
+		d.pos = 0
+		event := sofar[len("+EVENT:"):]
+		d.handle(event)
+
+	default:
+		// Catch everything else and store in d.last
+		d.pos = 0
+		size := len(sofar)
+		if size > 0 {
+			d.last = make([]byte, size)
+			copy(d.last, sofar[:size])
+			logDebug("GOT LINE " + string(d.last))
+		}
+	}
+}
+
+func (d *device) serviceUART() {
+	for {
+		d.uartMu.Lock()
+		for d.uart.Buffered() > 0 {
+			if d.pos >= len(d.buf) {
+				println("Trying to write past buffer")
+				d.pos = 0
+				break
+			}
+			var err error
+			d.buf[d.pos], err = d.uart.ReadByte()
+			if err == nil {
+				d.pos++
+				d.processUART()
+			}
+		}
+		d.uartMu.Unlock()
+		time.Sleep(10 * time.Millisecond)
+	}
+}
+
+func (d *device) NetConnect(params *netlink.ConnectParams) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	d.uart = d.cfg.Uart
+	d.uart.Configure(machine.UARTConfig{
+		BaudRate: d.cfg.BaudRate,
+		TX:       d.cfg.Tx,
+		RX:       d.cfg.Rx,
+	})
+
+	go d.serviceUART()
+
+	fmt.Printf("\r\n")
+	fmt.Printf("TinyGo Combo-AT WiFi network device driver\r\n")
+
+	fmt.Printf("\r\n")
+	fmt.Printf("Driver version            : %s\r\n", drivers.Version)
+
+	if len(params.Ssid) == 0 {
+		return netlink.ErrMissingSSID
+	}
+
+	// AT Test to see if device is alive
+	if err := d.execute("AT", 1000); err != nil {
+		return err
+	}
+
+	// Disable echo
+	if err := d.execute("ATE0", 1000); err != nil {
+		return err
+	}
+
+	// Get FW version
+	if err := d.execute("AT+GMR", 1000); err != nil {
+		return err
+	}
+	fmt.Printf("Combo-AT firmware version : %s\r\n", d.getFWVersion())
+
+	// Get/save MAC addresses
+	if err := d.execute("AT+CIPSTAMAC_DEF?", 1000); err != nil {
+		return err
+	}
+	d.saveMAC()
+	fmt.Printf("MAC address               : %s\r\n", d.mac.String())
+
+	// Set country code US
+	if err := d.execute("AT+WCOUNTRY=4", 1000); err != nil {
+		return err
+	}
+
+	// Get country code
+	if err := d.execute("AT+WCOUNTRY?", 1000); err != nil {
+		return err
+	}
+	fmt.Printf("WiFi country code         : %s\r\n", d.getCountry())
+
+	// Set Wi-Fi working mode to STA and save to flash
+	if err := d.execute("AT+WMODE=1,1", 1000); err != nil {
+		return err
+	}
+
+	// Connect to Wifi AP (keep trying until connected)
+	fmt.Printf("\r\n")
+	cmd := "AT+WJAP=" + params.Ssid + "," + params.Passphrase
+
+	for {
+		fmt.Printf("Connecting to WiFi SSID '%s'...", params.Ssid)
+		if err := d.execute(cmd, 20000); err != nil {
+			fmt.Printf("FAILED (%s)\r\n", err.Error())
+			continue
+		}
+		break
+	}
+
+	fmt.Printf("CONNECTED\r\n")
+
+	// Automatically reconnect to Wi-Fi after power on
+	if err := d.execute("AT+WAUTOCONN=1", 1000); err != nil {
+		return err
+	}
+
+	// Get/save IP/gateway addresses
+	if err := d.execute("AT+WJAP?", 1000); err != nil {
+		return err
+	}
+	d.saveIP()
+
+	fmt.Printf("\r\n")
+	fmt.Printf("DHCP-assigned IP          : %s\r\n", d.ip)
+	fmt.Printf("DHCP-assigned gateway     : %s\r\n", d.gateway)
+	fmt.Printf("\r\n")
+
+	// Set socket receiving mode to active
+	if err := d.execute("AT+SOCKETRECVCFG=1", 1000); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (d *device) NetDisconnect() {
+	d.Lock()
+	defer d.Unlock()
+	// Disconnect from WiFi AP
+	d.execute("AT+WDISCONNECT", 1000)
+}
+
+func (d *device) NetNotify(cb func(netlink.Event)) {
+	fmt.Printf("\r\n%s\r\n", netlink.ErrNotSupported)
+}
+
+func (d *device) GetHardwareAddr() (net.HardwareAddr, error) {
+	return d.mac, nil
+}
+
+func (d *device) _getHostByName(name string) (ip netip.Addr, err error) {
+	if err = d.execute("AT+WDOMAIN="+name, 1000); err != nil {
+		return
+	}
+	ipStr := split(d.last, 1, ":", "host by name")
+	return netip.ParseAddr(ipStr)
+}
+
+func (d *device) GetHostByName(name string) (ip netip.Addr, err error) {
+
+	// If it's already a dotted-network address, and not a host name,
+	// return it
+	ip, err = netip.ParseAddr(name)
+	if err == nil {
+		return
+	}
+
+	d.Lock()
+	defer d.Unlock()
+
+	return d._getHostByName(name)
+}
+
+func (d *device) Addr() (netip.Addr, error) {
+	return d.ip, nil
+}
+
+func (d *device) Socket(domain, stype, protocol int) (int, error) {
+
+	switch domain {
+	case netdev.AF_INET:
+	default:
+		return -1, netdev.ErrFamilyNotSupported
+	}
+
+	switch {
+	case protocol == netdev.IPPROTO_TCP && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_TLS && stype == netdev.SOCK_STREAM:
+	case protocol == netdev.IPPROTO_UDP && stype == netdev.SOCK_DGRAM:
+	default:
+		return -1, netdev.ErrProtocolNotSupported
+	}
+
+	d.Lock()
+	defer d.Unlock()
+
+	// Search for empty slot in sockets array
+	for fd, s := range d.sockets {
+		if s == nil {
+			// Found one
+			d.sockets[fd] = &socket{
+				protocol: protocol,
+				rx:       make(chan []byte, 10),
+			}
+			return fd, nil
+		}
+	}
+
+	return -1, netdev.ErrNoMoreSockets
+}
+
+func (d *device) Bind(sockfd int, ip netip.AddrPort) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	s.laddr = ip
+	return nil
+}
+
+func (d *device) Connect(sockfd int, host string, ip netip.AddrPort) error {
+
+	var addr string
+	var cmd string
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	if host == "" {
+		addr = ip.Addr().String()
+	} else {
+		ip, err := d._getHostByName(host)
+		if err != nil {
+			return err
+		}
+		addr = ip.String()
+	}
+	port := strconv.Itoa(int(ip.Port()))
+
+	switch s.protocol {
+	case netdev.IPPROTO_UDP:
+		cmd = "AT+SOCKET=2," + addr + "," + port
+	case netdev.IPPROTO_TCP:
+		cmd = "AT+SOCKET=4," + addr + "," + port
+	case netdev.IPPROTO_TLS:
+		cmd = "AT+SOCKET=7," + addr + "," + port
+	}
+
+	if cmd == "" {
+		return netdev.ErrProtocolNotSupported
+	}
+
+	if err := d.execute(cmd, 20000); err != nil {
+		return err
+	}
+
+	s.id = split(d.last, 1, "=", "connection ID")
+
+	return nil
+}
+
+func (d *device) Listen(sockfd, backlog int) error {
+
+	// TODO Creating a TCP server socket isn't working when in STA mode,
+	// TODO returning error "Socket bind error".
+	// TODO The reference example shows a TCP server example in AP mode.
+
+	/*
+		var cmd string
+
+		d.Lock()
+		defer d.Unlock()
+
+		s, err := d.getSocket(sockfd)
+		if err != nil {
+			return err
+		}
+
+		port := strconv.Itoa(int(s.laddr.Port()))
+
+		switch s.protocol {
+		case netdev.IPPROTO_UDP:
+			cmd = "AT+SOCKET=1," + port
+		case netdev.IPPROTO_TCP:
+			cmd = "AT+SOCKET=3," + port
+		}
+
+		if cmd == "" {
+			return netdev.ErrProtocolNotSupported
+		}
+
+		if err := d.execute(cmd, 20000); err != nil {
+			return err
+		}
+
+		s.id = split(d.last, 1, "=", "connection ID")
+	*/
+
+	return netdev.ErrNotSupported
+}
+
+func (d *device) Accept(sockfd int) (int, netip.AddrPort, error) {
+	return 0, netip.AddrPort{}, netdev.ErrNotSupported
+}
+
+func (d *device) Send(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return 0, err
+	}
+
+	cmd := fmt.Sprintf("AT+SOCKETSEND=%s,%d", s.id, len(buf))
+
+	if err := d.send(cmd, 1000); err != nil {
+		return 0, err
+	}
+
+	// AT+SOCKETSEND will sub-packet send data into 1024-byte chunks,
+	// automatically, so send the full buffer in one shot, even if it's
+	// bigger than 1024 bytes.
+
+	d.uartMu.Lock()
+	n, err := d.uart.Write(buf)
+	d.uartMu.Unlock()
+
+	if err != nil {
+		return 0, err
+	}
+
+	// Expecting "OK" after good send, or "ERROR"
+
+	t := time.NewTicker(time.Duration(1000) * time.Millisecond)
+	defer t.Stop()
+
+	select {
+	case <-t.C:
+		return 0, errors.New("Timed out")
+	case <-d.ok:
+		return n, nil
+	case err = <-d.err:
+		return 0, err
+	}
+}
+
+func (d *device) Recv(sockfd int, buf []byte, flags int, deadline time.Time) (int, error) {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return 0, err
+	}
+
+	// 1. Use leftover data first
+	if len(s.remainder) > 0 {
+		n := copy(buf, s.remainder)
+		s.remainder = s.remainder[n:]
+		return n, nil
+	}
+
+	// 2. Get new data from the channel
+	data, ok := <-s.rx
+	if !ok {
+		// Socket closed, return EOF
+		return 0, io.EOF
+	}
+
+	// 3. Copy data, handle leftovers
+	n := copy(buf, data)
+	if n < len(data) {
+		s.remainder = data[n:]
+	}
+
+	return n, nil
+}
+
+func (d *device) Close(sockfd int) error {
+
+	d.Lock()
+	defer d.Unlock()
+
+	s, err := d.getSocket(sockfd)
+	if err != nil {
+		return err
+	}
+
+	// Delete socket only if connection was successful (s.id is set)
+	if s.id != "" {
+		cmd := fmt.Sprintf("AT+SOCKETDEL=%s", s.id)
+		if err = d.execute(cmd, 1000); err != nil {
+			return err
+		}
+	}
+
+	d.sockets[sockfd] = nil
+
+	return nil
+}
+
+func (d *device) SetSockOpt(sockfd, level, opt int, value interface{}) error {
+	return netdev.ErrNotSupported
+}

comboat/errors.go

@@ -0,0 +1,86 @@
+package comboat
+
+import (
+	"bytes"
+	"strconv"
+)
+
+var errStrings = map[int]string{
+
+	// System framework related error codes
+
+	0:  "success",
+	1:  "The command is not supported (the combo framework contains the command but the current platform has not transplanted or adapted to support it)",
+	2:  "The command parameters contain unsupported operations (the current platform only supports some operations for this command)",
+	3:  "The instruction format is incorrect (this refers to the wrong number of parameters, for example, two parameters are required, but only one parameter is entered)",
+	4:  "Parameter error (the content of the parameter is wrong, for example, a number between 0 and 9 is required, but 10 or xyz is passed in, which is a parameter error)",
+	5:  "Parameter length error (command length exceeds the maximum supported length)",
+	31: "The current command has not ended and needs to report the status asynchronously. This value is used by the state machine to determine the use of the command and no message is returned.",
+	32: "Unknown error (or unhandled error type)",
+
+	// Common error codes
+
+	33: "malloc error",
+	34: "Failed to read buf",
+	35: "Failed to write buf",
+	36: "Configuration error (configuration error loaded from memory, for example, we set port -1 for OTA upgrade, and check port error when executing AT+OTA, then configuration error will be reported)",
+	37: "Failed to create task",
+	38: "Flash read and write failure",
+	39: "Serial port configuration error, unsupported baud rate",
+	40: "Serial port configuration error, unsupported data bits",
+	41: "Serial port configuration error, unsupported stop bit",
+	42: "Serial port configuration error, unsupported parity bit",
+	43: "Serial port configuration error, unsupported flow control",
+	44: "Serial port configuration failed",
+	45: "Wrong username/password",
+	46: "Low power mode error or unsupported low power mode",
+	47: "Uninitialized configuration data error (including io mapping data)",
+	63: "General error code (without other information)",
+
+	// Wi-Fi related error codes
+
+	64: "Wi-Fi not initialized or initialization failed",
+	65: "Wi-Fi mode error (unable to connect to Wi-Fi in single AP mode)",
+	66: "Wi-Fi connection failed",
+	67: "Wi-Fi connection successful, error in obtaining IP (DHCP)",
+	68: "Failed to obtain encryption method",
+	69: "The specified AP was not found.",
+	70: "Wi-Fi scan start failed",
+	71: "Wi-Fi scan timeout",
+	72: "Failed to enable AP hotspot",
+	73: "Failed to obtain the Wi-Fi information of the router or the AP information that you enabled yourself",
+	74: "The network card (STA/AP) is not running",
+	75: "Wi-Fi country code error (unsupported Wi-Fi country code)",
+	76: "The current network configuration mode is wrong.",
+	95: "Wi-Fi connection unknown error",
+
+	// Socket related error codes
+
+	96:  "Failed to create socket",
+	97:  "Socket connection failed",
+	98:  "DNS Failure",
+	99:  "The socket status is wrong (for example, TCP is not connected yet)",
+	100: "Socket type error",
+	101: "Socket send failed",
+	102: "Socket receive failed",
+	103: "Socket monitoring thread creation failed",
+	104: "Socket bind error",
+	105: "The current connection cannot be transparently linked (wrong socket type or number)",
+	106: "PING test failed (all packets lost)",
+	107: "Wi-Fi country code error (unsupported Wi-Fi country code)",
+	108: "SSL Config Error",
+	109: "SSL verification error (usually caused by unsupported SSL encryption type or certificate error)",
+	127: "Unknown socket error",
+}
+
+func getErrStr(errLine []byte) (errStr string) {
+	errStr = "Can't parse ERROR response"
+	tokens := bytes.Split(errLine, []byte(":"))
+	if len(tokens) > 1 {
+		errCode, err := strconv.Atoi(string(tokens[1]))
+		if err == nil {
+			errStr = errStrings[errCode]
+		}
+	}
+	return
+}

ds18b20/ds18b20.go

@@ -19,7 +19,7 @@ type OneWireDevice interface {
 	Write(uint8)
 	Read() uint8
 	Select([]uint8) error
-	Сrc8([]uint8, int) uint8
+	Сrc8([]uint8) uint8
 }
 
 // Device wraps a connection to an 1-Wire devices.
@@ -69,7 +69,7 @@ func (d Device) ReadTemperatureRaw(romid []uint8) ([]uint8, error) {
 	for i := 0; i < 9; i++ {
 		spb[i] = d.owd.Read()
 	}
-	if d.owd.Сrc8(spb, 8) != spb[8] {
+	if d.owd.Сrc8(spb) != 0 {
 		return nil, errReadTemperature
 	}
 	return spb[:2:2], nil

easystepper/easystepper.go

@@ -2,9 +2,9 @@
 package easystepper // import "tinygo.org/x/drivers/easystepper"
 
 import (
-	"errors"
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
 )
 
 // StepMode determines the coil sequence used to perform a single step
@@ -30,28 +30,10 @@ func (sm StepMode) stepCount() uint {
 	}
 }
 
-// DeviceConfig contains the configuration data for a single easystepper driver
-type DeviceConfig struct {
-	// Pin1 ... Pin4 determines the pins to configure and use for the device
-	Pin1, Pin2, Pin3, Pin4 machine.Pin
-	// StepCount is the number of steps required to perform a full revolution of the stepper motor
-	StepCount uint
-	// RPM determines the speed of the stepper motor in 'Revolutions per Minute'
-	RPM uint
-	// Mode determines the coil sequence used to perform a single step
-	Mode StepMode
-}
-
-// DualDeviceConfig contains the configuration data for a dual easystepper driver
-type DualDeviceConfig struct {
-	DeviceConfig
-	// Pin5 ... Pin8 determines the pins to configure and use for the second device
-	Pin5, Pin6, Pin7, Pin8 machine.Pin
-}
-
 // Device holds the pins and the delay between steps
 type Device struct {
-	pins       [4]machine.Pin
+	pins       [4]drivers.PinOutputFunc
+	config     func()
 	stepDelay  time.Duration
 	stepNumber uint8
 	stepMode   StepMode
@@ -62,51 +44,6 @@ type DualDevice struct {
 	devices [2]*Device
 }
 
-// New returns a new single easystepper driver given a DeviceConfig
-func New(config DeviceConfig) (*Device, error) {
-	if config.StepCount == 0 || config.RPM == 0 {
-		return nil, errors.New("config.StepCount and config.RPM must be > 0")
-	}
-	return &Device{
-		pins:      [4]machine.Pin{config.Pin1, config.Pin2, config.Pin3, config.Pin4},
-		stepDelay: time.Second * 60 / time.Duration((config.StepCount * config.RPM)),
-		stepMode:  config.Mode,
-	}, nil
-}
-
-// Configure configures the pins of the Device
-func (d *Device) Configure() {
-	for _, pin := range d.pins {
-		pin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	}
-}
-
-// NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
-func NewDual(config DualDeviceConfig) (*DualDevice, error) {
-	// Create the first device
-	dev1, err := New(config.DeviceConfig)
-	if err != nil {
-		return nil, err
-	}
-	// Create the second device
-	config.DeviceConfig.Pin1 = config.Pin5
-	config.DeviceConfig.Pin2 = config.Pin6
-	config.DeviceConfig.Pin3 = config.Pin7
-	config.DeviceConfig.Pin4 = config.Pin8
-	dev2, err := New(config.DeviceConfig)
-	if err != nil {
-		return nil, err
-	}
-	// Return composite dual device
-	return &DualDevice{devices: [2]*Device{dev1, dev2}}, nil
-}
-
-// Configure configures the pins of the DualDevice
-func (d *DualDevice) Configure() {
-	d.devices[0].Configure()
-	d.devices[1].Configure()
-}
-
 // Move rotates the motor the number of given steps
 // (negative steps will rotate it the opposite direction)
 func (d *Device) Move(steps int32) {

easystepper/easystepper_go.go

@@ -0,0 +1,26 @@
+package easystepper
+
+import (
+	"errors"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+func NewCrossPlatform(stepcount, rpm uint, mode StepMode, pins [4]drivers.PinOutputFunc) (*Device, error) {
+	if stepcount == 0 || rpm == 0 {
+		return nil, errors.New("zero rpm and/or stepcount")
+	}
+	for i := range pins {
+		if pins[i] == nil {
+			return nil, errors.New("nil pin")
+		}
+	}
+	d := &Device{
+		pins:      pins,
+		stepDelay: time.Second * 60 / time.Duration((stepcount * rpm)),
+		stepMode:  mode,
+		config:    func() {},
+	}
+	return d, nil
+}

easystepper/easystepper_tinygo.go

@@ -0,0 +1,83 @@
+//go:build baremetal
+
+package easystepper
+
+import (
+	"errors"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
+
+// New returns a new single easystepper driver given a DeviceConfig
+func New(config DeviceConfig) (*Device, error) {
+	if config.StepCount == 0 || config.RPM == 0 {
+		return nil, errors.New("config.StepCount and config.RPM must be > 0")
+	}
+	return &Device{
+		pins:      [4]drivers.PinOutputFunc{config.Pin1.Set, config.Pin2.Set, config.Pin3.Set, config.Pin4.Set},
+		stepDelay: time.Second * 60 / time.Duration((config.StepCount * config.RPM)),
+		stepMode:  config.Mode,
+		config: func() {
+			legacy.ConfigurePinOut(config.Pin1)
+			legacy.ConfigurePinOut(config.Pin2)
+			legacy.ConfigurePinOut(config.Pin3)
+			legacy.ConfigurePinOut(config.Pin4)
+		},
+	}, nil
+}
+
+// Configure configures the pins of the Device
+func (d *Device) Configure() {
+	if d.config == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.config()
+}
+
+// Configure configures the pins of the DualDevice
+func (d *DualDevice) Configure() {
+	d.devices[0].Configure()
+	d.devices[1].Configure()
+}
+
+// NewDual returns a new dual easystepper driver given 8 pins, number of steps and rpm
+func NewDual(config DualDeviceConfig) (*DualDevice, error) {
+	// Create the first device
+	dev1, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
+	}
+	// Create the second device
+	config.DeviceConfig.Pin1 = config.Pin5
+	config.DeviceConfig.Pin2 = config.Pin6
+	config.DeviceConfig.Pin3 = config.Pin7
+	config.DeviceConfig.Pin4 = config.Pin8
+	dev2, err := New(config.DeviceConfig)
+	if err != nil {
+		return nil, err
+	}
+	// Return composite dual device
+	return &DualDevice{devices: [2]*Device{dev1, dev2}}, nil
+}
+
+// DeviceConfig contains the configuration data for a single easystepper driver
+type DeviceConfig struct {
+	// Pin1 ... Pin4 determines the pins to configure and use for the device
+	Pin1, Pin2, Pin3, Pin4 machine.Pin
+	// StepCount is the number of steps required to perform a full revolution of the stepper motor
+	StepCount uint
+	// RPM determines the speed of the stepper motor in 'Revolutions per Minute'
+	RPM uint
+	// Mode determines the coil sequence used to perform a single step
+	Mode StepMode
+}
+
+// DualDeviceConfig contains the configuration data for a dual easystepper driver
+type DualDeviceConfig struct {
+	DeviceConfig
+	// Pin5 ... Pin8 determines the pins to configure and use for the second device
+	Pin5, Pin6, Pin7, Pin8 machine.Pin
+}

encoders/quadrature_interrupt.go

@@ -1,4 +1,4 @@
-//go:build tinygo && (rp2040 || stm32 || k210 || esp32c3 || nrf || (avr && (atmega328p || atmega328pb)))
+//go:build tinygo && (rp2040 || stm32 || k210 || esp32c3 || nrf || sam || (avr && (atmega328p || atmega328pb)))
 
 // Implementation based on:
 // https://gist.github.com/aykevl/3fc1683ed77bb0a9c07559dfe857304a

ens160/ens160.go

@@ -0,0 +1,225 @@
+// Package ens160 provides a driver for the ScioSense ENS160 digital gas sensor.
+//
+// Datasheet: https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
+package ens160
+
+import (
+	"encoding/binary"
+	"errors"
+	"time"
+
+	"tinygo.org/x/drivers"
+)
+
+const (
+	defaultTimeout = 30 * time.Millisecond
+	shortTimeout   = 1 * time.Millisecond
+)
+
+// Conversion constants for environment data compensation.
+const (
+	kelvinOffsetMilli = 273150          // 273.15 K in milli-units
+	tempRawFactor     = 64              // As per datasheet for TEMP_IN
+	humRawFactor      = 512             // As per datasheet for RH_IN
+	milliFactor       = 1000            // For converting from milli-units
+	roundingTerm      = milliFactor / 2 // For rounding before integer division
+)
+
+// validityStrings provides human-readable descriptions for validity flags.
+var validityStrings = [...]string{
+	ValidityNormalOperation:     "normal operation",
+	ValidityWarmUpPhase:         "warm-up phase, wait ~3 minutes for valid data",
+	ValidityInitialStartUpPhase: "initial start-up phase, wait ~1 hour for valid data",
+	ValidityInvalidOutput:       "invalid output",
+}
+
+// Device wraps an I2C connection to an ENS160 device.
+type Device struct {
+	bus  drivers.I2C // I²C implementation
+	addr uint16      // 7‑bit bus address, promoted to uint16 per drivers.I2C
+
+	// shadow registers / last measurements
+	lastTvocPPB  uint16
+	lastEco2PPM  uint16
+	lastAqiUBA   uint8
+	lastValidity uint8 // Store the latest validity status
+
+	// pre‑allocated buffers
+	wbuf [5]byte // longest write: reg + 4 bytes (TEMP+RH)
+	rbuf [5]byte // longest read: DATA burst (5 bytes)
+}
+
+// New returns a new ENS160 driver.
+func New(bus drivers.I2C, addr uint16) *Device {
+	if addr == 0 {
+		addr = DefaultAddress
+	}
+	return &Device{
+		bus:          bus,
+		addr:         addr,
+		lastValidity: ValidityInvalidOutput,
+	}
+}
+
+// Connected returns whether a ENS160 has been found.
+func (d *Device) Connected() bool {
+	d.wbuf[0] = regPartID
+	err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:2])
+	return err == nil && d.rbuf[0] == LowPartID && d.rbuf[1] == HighPartID
+}
+
+// Configure sets up the device for reading.
+func (d *Device) Configure() error {
+	// 1. Soft-reset. The device will automatically enter IDLE mode.
+	if err := d.write1(regOpMode, ModeReset); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	// 2. Clear GPR registers, then go to STANDARD mode.
+	if err := d.write1(regCommand, cmdClrGPR); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	if err := d.write1(regOpMode, ModeStandard); err != nil {
+		return err
+	}
+	time.Sleep(defaultTimeout)
+
+	return nil
+}
+
+// calculateTempRaw converts temperature from milli-degrees Celsius to the sensor's raw format.
+func calculateTempRaw(tempMilliC int32) uint16 {
+	// Clip temperature
+	const (
+		minC = -40 * 1000
+		maxC = 85 * 1000
+	)
+	if tempMilliC < minC {
+		tempMilliC = minC
+	} else if tempMilliC > maxC {
+		tempMilliC = maxC
+	}
+
+	// Integer fixed-point conversion to format required by the sensor.
+	// Formula from datasheet: T_IN = (T_ambient_C + 273.15) * 64
+	return uint16((((tempMilliC + kelvinOffsetMilli) * tempRawFactor) + roundingTerm) / milliFactor)
+}
+
+// calculateHumRaw converts relative humidity from milli-percent to the sensor's raw format.
+func calculateHumRaw(rhMilliPct int32) uint16 {
+	// Clip humidity
+	if rhMilliPct < 0 {
+		rhMilliPct = 0
+	} else if rhMilliPct > 100*1000 {
+		rhMilliPct = 100 * 1000
+	}
+
+	// Integer fixed-point conversion to format required by the sensor.
+	// Formula from datasheet: RH_IN = (RH_ambient_% * 512)
+	return uint16(((rhMilliPct * humRawFactor) + roundingTerm) / milliFactor)
+}
+
+// SetEnvDataMilli sets the ambient temperature and humidity for compensation.
+//
+// tempMilliC is the temperature in milli-degrees Celsius.
+// rhMilliPct is the relative humidity in milli-percent.
+func (d *Device) SetEnvDataMilli(tempMilliC, rhMilliPct int32) error {
+	tempRaw := calculateTempRaw(tempMilliC)
+	humRaw := calculateHumRaw(rhMilliPct)
+
+	d.wbuf[0] = regTempIn // start address (auto‑increment)
+	binary.LittleEndian.PutUint16(d.wbuf[1:3], tempRaw)
+	binary.LittleEndian.PutUint16(d.wbuf[3:5], humRaw)
+
+	return d.bus.Tx(d.addr, d.wbuf[:5], nil)
+}
+
+// Update refreshes the concentration measurements.
+func (d *Device) Update(which drivers.Measurement) error {
+	if which&drivers.Concentration == 0 {
+		return nil // nothing requested
+	}
+
+	const maxTries = 1000
+	var (
+		status   uint8
+		validity uint8
+	)
+	var gotData bool
+
+	// Poll DEVICE_STATUS until NEWDAT or timeout
+	for range maxTries {
+		var err error
+		status, err = d.read1(regStatus)
+		if err != nil {
+			return err
+		}
+		if status&statusSTATER != 0 {
+			return errors.New("ENS160: error (STATER set)")
+		}
+		validity = (status & statusValidityMask) >> statusValidityShift
+
+		if status&statusNEWDAT != 0 {
+			gotData = true
+			break // Always break when data available
+		}
+		time.Sleep(shortTimeout)
+	}
+	if !gotData {
+		return errors.New("ENS160: timeout waiting for NEWDAT")
+	}
+
+	// Burst-read data regardless of validity state
+	d.wbuf[0] = regAQI
+	if err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:5]); err != nil {
+		return errors.New("ENS160: burst read failed")
+	}
+
+	d.lastAqiUBA = d.rbuf[0]
+	d.lastTvocPPB = binary.LittleEndian.Uint16(d.rbuf[1:3])
+	d.lastEco2PPM = binary.LittleEndian.Uint16(d.rbuf[3:5])
+	d.lastValidity = validity // Store the validity status
+
+	return nil
+}
+
+// TVOC returns the last total‑VOC concentration in parts‑per‑billion.
+func (d *Device) TVOC() uint16 { return d.lastTvocPPB }
+
+// ECO2 returns the last equivalent CO₂ concentration in parts‑per‑million.
+func (d *Device) ECO2() uint16 { return d.lastEco2PPM }
+
+// AQI returns the last Air‑Quality Index according to UBA (1–5).
+func (d *Device) AQI() uint8 { return d.lastAqiUBA }
+
+// Validity returns the current operating state of the sensor.
+func (d *Device) Validity() uint8 {
+	return d.lastValidity
+}
+
+// ValidityString returns a human-readable string describing the current validity status.
+func (d *Device) ValidityString() string {
+	if int(d.lastValidity) < len(validityStrings) {
+		return validityStrings[d.lastValidity]
+	}
+	return "unknown"
+}
+
+// write1 writes a single byte to a register.
+func (d *Device) write1(reg, val uint8) error {
+	d.wbuf[0] = reg
+	d.wbuf[1] = val
+	return d.bus.Tx(d.addr, d.wbuf[:2], nil)
+}
+
+// read1 reads a single byte from a register.
+func (d *Device) read1(reg uint8) (uint8, error) {
+	d.wbuf[0] = reg
+	if err := d.bus.Tx(d.addr, d.wbuf[:1], d.rbuf[:1]); err != nil {
+		return 0, err
+	}
+	return d.rbuf[0], nil
+}

ens160/ens160_test.go

@@ -0,0 +1,54 @@
+package ens160
+
+import (
+	"testing"
+)
+
+func TestCalculateTempRaw(t *testing.T) {
+	testCases := []struct {
+		name        string
+		tempMilliC  int32
+		expectedRaw uint16
+	}{
+		{"25°C", 25000, 19082},
+		{"-10.5°C", -10500, 16810},
+		{"Min temp", -40000, 14922},
+		{"Below min", -50000, 14922},
+		{"Max temp", 85000, 22922},
+		{"Above max", 90000, 22922},
+		{"Zero", 0, 17482},
+	}
+
+	for _, tc := range testCases {
+		t.Run(tc.name, func(t *testing.T) {
+			raw := calculateTempRaw(tc.tempMilliC)
+			if raw != tc.expectedRaw {
+				t.Errorf("expected %d, got %d", tc.expectedRaw, raw)
+			}
+		})
+	}
+}
+
+func TestCalculateHumRaw(t *testing.T) {
+	testCases := []struct {
+		name        string
+		rhMilliPct  int32
+		expectedRaw uint16
+	}{
+		{"50%", 50000, 25600},
+		{"0%", 0, 0},
+		{"100%", 100000, 51200},
+		{"Below 0%", -10000, 0},
+		{"Above 100%", 110000, 51200},
+		{"33.3%", 33300, 17050},
+	}
+
+	for _, tc := range testCases {
+		t.Run(tc.name, func(t *testing.T) {
+			raw := calculateHumRaw(tc.rhMilliPct)
+			if raw != tc.expectedRaw {
+				t.Errorf("expected %d, got %d", tc.expectedRaw, raw)
+			}
+		})
+	}
+}

ens160/registers.go

@@ -0,0 +1,65 @@
+package ens160
+
+// DefaultAddress is the default I2C address for the ENS160 when the ADDR pin is
+// connected to high (3.3V). When connected to low (GND), the address is 0x52.
+const DefaultAddress = 0x53
+
+// Registers
+const (
+	regPartID   = 0x00
+	regOpMode   = 0x10
+	regConfig   = 0x11
+	regCommand  = 0x12
+	regTempIn   = 0x13
+	regRhIn     = 0x15
+	regStatus   = 0x20
+	regAQI      = 0x21
+	regTVOC     = 0x22
+	regECO2     = 0x24
+	regDataT    = 0x30
+	regDataRH   = 0x32
+	regMISR     = 0x38
+	regGPRWrite = 0x40
+	regGPRRead  = 0x48
+)
+
+// Operating modes
+const (
+	ModeDeepSleep = 0x00
+	ModeIdle      = 0x01
+	ModeStandard  = 0x02
+	ModeReset     = 0xF0
+)
+
+// Status register bits
+const (
+	statusSTATAS = 1 << 7
+	statusSTATER = 1 << 6
+
+	statusValidityMask  = 0x0C
+	statusValidityShift = 2
+
+	statusNEWDAT = 1 << 1
+	statusNEWGPR = 1 << 0
+)
+
+// Validity flags
+const (
+	ValidityNormalOperation     = 0x00
+	ValidityWarmUpPhase         = 0x01 // need ~3 minutes until valid data
+	ValidityInitialStartUpPhase = 0x02 // need ~1 hour until valid data
+	ValidityInvalidOutput       = 0x03
+)
+
+// Commands
+const (
+	cmdNOP       = 0x00
+	cmdGetAppVer = 0x0E
+	cmdClrGPR    = 0xCC
+)
+
+// Part IDs
+const (
+	LowPartID  = 0x60
+	HighPartID = 0x01
+)

espat/espat.go

@@ -122,7 +122,7 @@ func (d *Device) NetDisconnect() {
 }
 
 func (d *Device) NetNotify(cb func(netlink.Event)) {
-	// Not supported
+	fmt.Printf("\r\n%s\r\n", netlink.ErrNotSupported)
 }
 
 func (d *Device) GetHostByName(name string) (netip.Addr, error) {
@@ -473,7 +473,6 @@ func (d *Device) parseIPD(end int) error {
 	}
 
 	// load up the socket data
-	//d.data = append(d.data, d.response[e+1:end]...)
 	d.data = append(d.data, d.response[e+1:e+1+v]...)
 	return nil
 }

examples/ens160/main.go

@@ -0,0 +1,56 @@
+// This example demonstrates ENS160 usage.
+//
+// Wiring:
+// - VCC to 3.3V, GND to ground
+// - SDA to board SDA, SCL to board SCL
+
+package main
+
+import (
+	"time"
+
+	"machine"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/ens160"
+)
+
+func main() {
+	err := machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: 400 * machine.KHz,
+	})
+	if err != nil {
+		println("Failed to configure I2C:", err)
+	}
+
+	dev := ens160.New(machine.I2C0, ens160.DefaultAddress)
+
+	connected := dev.Connected()
+	if !connected {
+		println("ENS160 not detected")
+		return
+	}
+	println("ENS160 detected")
+
+	if err := dev.Configure(); err != nil {
+		println("Failed to configure ENS160:", err)
+	}
+
+	for {
+		err := dev.Update(drivers.Concentration)
+		if err != nil {
+			println("Error reading ENS160: %v\n", err)
+			time.Sleep(5 * time.Second)
+			continue
+		}
+
+		println(
+			"AQI:", dev.AQI(),
+			"TVOC:", dev.TVOC(),
+			"eCO2:", dev.ECO2(),
+			"Validity:", dev.ValidityString(),
+		)
+
+		time.Sleep(2 * time.Second)
+	}
+}

examples/flash/console/spi/main.go

@@ -10,7 +10,7 @@ import (
 func main() {
 	console_example.RunFor(
 		flash.NewSPI(
-			&machine.SPI1,
+			machine.SPI1,
 			machine.SPI1_SDO_PIN,
 			machine.SPI1_SDI_PIN,
 			machine.SPI1_SCK_PIN,

examples/gps/i2c/main.go

@@ -10,7 +10,7 @@ import (
 func main() {
 	println("GPS I2C Example")
 	machine.I2C0.Configure(machine.I2CConfig{})
-	ublox := gps.NewI2C(machine.I2C0)
+	ublox := gps.NewI2CWithAddress(machine.I2C0, gps.UBLOX_I2C_ADDRESS)
 	parser := gps.NewParser()
 	var fix gps.Fix
 	for {

examples/ina219/main.go

@@ -0,0 +1,29 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/ina219"
+)
+
+func main() {
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	dev := ina219.New(machine.I2C0)
+	dev.Configure()
+
+	for {
+		busVoltage, shuntVoltage, current, power, err := dev.Measurements()
+		if err != nil {
+			println("Error reading measurements", err)
+		}
+
+		println("Bus Voltage:", busVoltage, "V")
+		println("Shunt Voltage:", shuntVoltage/100, "mV")
+		println("Current:", current, "mA")
+		println("Power:", power, "mW")
+
+		time.Sleep(10 * time.Millisecond)
+	}
+}

examples/lsm303dlhc/main.go

@@ -0,0 +1,58 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/lsm303dlhc"
+)
+
+func main() {
+
+	// LSM303DLHC is connected to the I2C0 bus on Adafruit Feather M4 via pins: 20(SDA) and 21(SCL).
+	machine.I2C0.Configure(machine.I2CConfig{})
+
+	sensor := lsm303dlhc.New(machine.I2C0)
+	//default settings
+	err := sensor.Configure(lsm303dlhc.Configuration{
+		AccelPowerMode: lsm303dlhc.ACCEL_POWER_NORMAL,
+		AccelRange:     lsm303dlhc.ACCEL_RANGE_2G,
+		AccelDataRate:  lsm303dlhc.ACCEL_DATARATE_100HZ,
+		MagPowerMode:   lsm303dlhc.MAG_POWER_NORMAL,
+		MagSystemMode:  lsm303dlhc.MAG_SYSTEM_CONTINUOUS,
+		MagDataRate:    lsm303dlhc.MAG_DATARATE_10HZ,
+	})
+	if err != nil {
+		for {
+			println("Failed to configure", err.Error())
+			time.Sleep(time.Second)
+		}
+	}
+
+	for {
+		accel_x, accel_y, accel_z, err := sensor.ReadAcceleration()
+		if err != nil {
+			println("Failed to read accel", err.Error())
+		}
+		println("ACCEL_X:", accel_x, " ACCEL_Y:", accel_y, " ACCEL_Z:", accel_z)
+
+		mag_x, mag_y, mag_z, err := sensor.ReadMagneticField()
+		if err != nil {
+			println("Failed to read mag", err.Error())
+		}
+		println("MAG_X:", mag_x, " MAG_Y:", mag_y, " MAG_Z:", mag_z)
+
+		pitch, roll, _ := sensor.ReadPitchRoll()
+		println("Pitch:", float32(pitch), " Roll:", float32(roll))
+
+		heading, _ := sensor.ReadCompass()
+		println("Heading:", float32(heading), "degrees")
+
+		temp, _ := sensor.ReadTemperature()
+		println("Temperature:", float32(temp)/1000, "*C")
+
+		println("\n")
+		time.Sleep(time.Millisecond * 250)
+	}
+
+}

examples/max6675/main.go

@@ -0,0 +1,34 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/max6675"
+)
+
+// example for reading temperature from a thermocouple
+func main() {
+	// Pins are for an Adafruit Feather nRF52840 Express
+	machine.D5.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.D5.High()
+
+	machine.SPI0.Configure(machine.SPIConfig{
+		Frequency: 1_000_000,
+		SCK:       machine.SPI0_SCK_PIN,
+		SDI:       machine.SPI0_SDI_PIN,
+	})
+
+	thermocouple := max6675.NewDevice(machine.SPI0, machine.D5)
+
+	for {
+		temp, err := thermocouple.Read()
+		if err != nil {
+			println(err)
+			return
+		}
+		fmt.Printf("%0.02f C : %0.02f F\n", temp, (temp*9/5)+32)
+		time.Sleep(time.Second)
+	}
+}

examples/mcp9808/main.go

@@ -0,0 +1,48 @@
+package main
+
+import (
+	"fmt"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/mcp9808"
+)
+
+func main() {
+
+	//tinygo monitor
+	time.Sleep(time.Millisecond * 5000)
+
+	//Configure I2C (in this case, I2C0 on RPI Pico), and wire the module accordingly
+	machine.I2C0.Configure(machine.I2CConfig{
+		SCL: machine.GP1,
+		SDA: machine.GP0,
+	})
+
+	//Create sensor
+	sensor := mcp9808.New(machine.I2C0)
+	if !sensor.Connected() {
+		println("MCP9808 not found")
+		return
+	} else {
+		println("MCP9808 found")
+	}
+
+	time.Sleep(time.Millisecond * 1000)
+
+	//Set resolution
+	sensor.SetResolution(mcp9808.Maximum)
+
+	time.Sleep(time.Millisecond * 1000)
+
+	//Read temp.
+	temp, err := sensor.ReadTemperature()
+	if err != nil {
+		println("MCP9808 error reading temperature")
+		println(err.Error())
+		return
+	} else {
+		fmt.Printf("Temperature: %.2f \n", temp)
+	}
+	return
+}

examples/net/http-get/main.go

@@ -9,7 +9,7 @@
 //     examples/net/webclient (for HTTP)
 //     examples/net/tlsclient (for HTTPS)
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/http-head/main.go

@@ -9,7 +9,7 @@
 //     examples/net/webclient (for HTTP)
 //     examples/net/tlsclient (for HTTPS)
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/http-post/main.go

@@ -9,7 +9,7 @@
 //     examples/net/webclient (for HTTP)
 //     examples/net/tlsclient (for HTTPS)
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/http-postform/main.go

@@ -9,7 +9,7 @@
 //     examples/net/webclient (for HTTP)
 //     examples/net/tlsclient (for HTTPS)
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/mqttclient/natiu/main.go

@@ -4,7 +4,7 @@
 // Note: It may be necessary to increase the stack size when using
 // paho.mqtt.golang.  Use the -stack-size=4KB command line option.
 
-//go:build ninafw || wioterminal || challenger_rp2040
+//go:build ninafw || wioterminal || challenger_rp2040 || comboat_fw
 
 package main
 

examples/net/mqttclient/paho/main.go

@@ -4,7 +4,7 @@
 // Note: It may be necessary to increase the stack size when using
 // paho.mqtt.golang.  Use the -stack-size=4KB command line option.
 
-//go:build ninafw || wioterminal || challenger_rp2040
+//go:build ninafw || wioterminal || challenger_rp2040 || comboat_fw
 
 package main
 

examples/net/ntpclient/main.go

@@ -3,7 +3,7 @@
 // It creates a UDP connection to request the current time and parse the
 // response from a NTP server.  The system time is set to NTP time.
 
-//go:build ninafw || wioterminal || challenger_rp2040
+//go:build ninafw || wioterminal || challenger_rp2040 || comboat_fw
 
 package main
 

examples/net/snake/init.go

@@ -1,4 +1,4 @@
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/snake/main.go

@@ -31,7 +31,7 @@
 // func.  This forces segments to connect and run concurrently, which is a good
 // test of the underlying driver's ability to handle concurrent connections.
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/socket/main.go

@@ -4,7 +4,7 @@
 //
 // nc -lk 8080
 
-//go:build ninafw || wioterminal || challenger_rp2040
+//go:build ninafw || wioterminal || challenger_rp2040 || comboat_fw
 
 package main
 

examples/net/tcpclient/main.go

@@ -5,7 +5,7 @@
 //
 // nc -lk 8080
 
-//go:build ninafw || wioterminal || challenger_rp2040 || pico
+//go:build ninafw || wioterminal || challenger_rp2040 || comboat_fw
 
 package main
 

examples/net/tlsclient/main.go

@@ -5,7 +5,7 @@
 //
 // https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Strict-Transport-Security
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/webclient/main.go

@@ -17,7 +17,7 @@
 // }
 // ---------------------------------------------------------------------------
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/net/websocket/dial/main.go

@@ -6,7 +6,7 @@
 // Note: It may be necessary to increase the stack size when using
 // "golang.org/x/net/websocket".  Use the -stack-size=4KB command line option.
 
-//go:build ninafw || wioterminal
+//go:build ninafw || wioterminal || comboat_fw
 
 package main
 

examples/pcf8591/main.go

@@ -0,0 +1,28 @@
+// Connects to a pcf8591 ADC via I2C.
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/pcf8591"
+)
+
+var (
+	i2c = machine.I2C0
+)
+
+func main() {
+	i2c.Configure(machine.I2CConfig{})
+	adc := pcf8591.New(i2c)
+	adc.Configure()
+
+	// get "CH0" aka "machine.ADC" interface to channel 0 from ADC.
+	p := adc.CH0
+
+	for {
+		val := p.Get()
+		println(val)
+		time.Sleep(50 * time.Millisecond)
+	}
+}

examples/sdcard/console/feather-m4.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/grandcentral-m4.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI1
+	spi = machine.SPI1
 	sckPin = machine.SDCARD_SCK_PIN
 	sdoPin = machine.SDCARD_SDO_PIN
 	sdiPin = machine.SDCARD_SDI_PIN

examples/sdcard/console/m0.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/p1am-100.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SDCARD_SPI
+	spi = machine.SDCARD_SPI
 	sckPin = machine.SDCARD_SCK_PIN
 	sdoPin = machine.SDCARD_SDO_PIN
 	sdiPin = machine.SDCARD_SDI_PIN

examples/sdcard/console/pygamer.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/pyportal.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/wioterminal.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI2
+	spi = machine.SPI2
 	sckPin = machine.SCK2
 	sdoPin = machine.SDO2
 	sdiPin = machine.SDI2

examples/seesaw/rotary-encoder/main.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/seesaw"
+)
+
+// example reading the position of a rotary encoder (4991) powered by a seesaw
+// https://learn.adafruit.com/adafruit-i2c-qt-rotary-encoder/arduino
+func main() {
+	// This assumes you are using an Adafruit QT Py RP2040 for its Stemma QT connector
+	// https://www.adafruit.com/product/4900
+	i2c := machine.I2C1
+	i2c.Configure(machine.I2CConfig{
+		SCL: machine.I2C1_QT_SCL_PIN,
+		SDA: machine.I2C1_QT_SDA_PIN,
+	})
+
+	dev := seesaw.New(i2c)
+	dev.Address = 0x36
+
+	for {
+		time.Sleep(time.Second)
+
+		pos, err := dev.GetEncoderPosition(0, false)
+		if err != nil {
+			println(err)
+			continue
+		}
+
+		println(pos)
+	}
+}

examples/servo/servo.go

@@ -25,19 +25,25 @@ func main() {
 		return
 	}
 
-	println("setting to 0°")
-	s.SetMicroseconds(1000)
-	time.Sleep(3 * time.Second)
-
-	println("setting to 45°")
-	s.SetMicroseconds(1500)
-	time.Sleep(3 * time.Second)
-
-	println("setting to 90°")
-	s.SetMicroseconds(2000)
-	time.Sleep(3 * time.Second)
-
 	for {
-		time.Sleep(time.Second)
+		println("setting to 0°")
+		s.SetAngle(0)
+		time.Sleep(3 * time.Second)
+
+		println("setting to 45°")
+		s.SetAngle(45)
+		time.Sleep(3 * time.Second)
+
+		println("setting to 90°")
+		s.SetAngle(90)
+		time.Sleep(3 * time.Second)
+
+		println("setting to 135°")
+		s.SetAngle(135)
+		time.Sleep(3 * time.Second)
+
+		println("setting to 180°")
+		s.SetAngle(180)
+		time.Sleep(3 * time.Second)
 	}
 }

examples/sharpmem/main.go

@@ -0,0 +1,90 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"math/rand/v2"
+	"time"
+
+	"tinygo.org/x/drivers/sharpmem"
+)
+
+var (
+	// example wiring using a nice!view and nice!nano:
+	// (view)   (nano)
+	// MOSI --> P0.24
+	// SCK ---> P0.22
+	// GND ---> GND
+	// VCC ---> 3.3V
+	// CS ----> P0.06
+
+	spi = machine.SPI0
+
+	sckPin = machine.SPI0_SCK_PIN // SCK
+	sdoPin = machine.SPI0_SDO_PIN // MOSI
+	sdiPin = machine.SPI0_SDI_PIN // (any pin)
+
+	csPin = machine.P0_06 // CS
+)
+
+func main() {
+	time.Sleep(time.Second)
+
+	err := spi.Configure(machine.SPIConfig{
+		Frequency: 2000000,
+		SCK:       sckPin,
+		SDO:       sdoPin,
+		SDI:       sdiPin,
+		Mode:      0,
+		LSBFirst:  true,
+	})
+	if err != nil {
+		println("spi.Configure() failed, error:", err.Error())
+		return
+	}
+
+	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+
+	display := sharpmem.New(spi, csPin)
+
+	cfg := sharpmem.ConfigLS011B7DH03
+	display.Configure(cfg)
+
+	// clear the display before first use
+	err = display.Clear()
+	if err != nil {
+		println("display.Clear() failed, error:", err.Error())
+		return
+	}
+
+	// random boxes pop into and out of existence
+	for {
+		x0 := int16(rand.IntN(int(cfg.Width - 7)))
+		y0 := int16(rand.IntN(int(cfg.Height - 7)))
+
+		for x2 := int16(0); x2 < 16; x2++ {
+			x2 := x2
+			c := color.RGBA{R: 255, G: 255, B: 255, A: 255}
+
+			if x2 >= 8 {
+				// effectively erases the box after it showed up
+				x2 = x2 - 8
+				c = color.RGBA{R: 0, G: 0, B: 0, A: 255}
+			}
+
+			for x := int16(0); x < x2; x++ {
+				for y := int16(0); y < 8; y++ {
+					display.SetPixel(x0+x, y0+y, c)
+				}
+			}
+
+			err = display.Display()
+			if err != nil {
+				println("display.Display() failed, error:", err.Error())
+				continue
+			}
+
+			time.Sleep(33 * time.Millisecond)
+		}
+	}
+}

examples/ssd1306/i2c_128x32/main.go

@@ -1,51 +0,0 @@
-package main
-
-import (
-	"machine"
-
-	"image/color"
-	"time"
-
-	"tinygo.org/x/drivers/ssd1306"
-)
-
-func main() {
-	machine.I2C0.Configure(machine.I2CConfig{
-		Frequency: machine.TWI_FREQ_400KHZ,
-	})
-
-	display := ssd1306.NewI2C(machine.I2C0)
-	display.Configure(ssd1306.Config{
-		Address: ssd1306.Address_128_32,
-		Width:   128,
-		Height:  32,
-	})
-
-	display.ClearDisplay()
-
-	x := int16(0)
-	y := int16(0)
-	deltaX := int16(1)
-	deltaY := int16(1)
-	for {
-		pixel := display.GetPixel(x, y)
-		c := color.RGBA{255, 255, 255, 255}
-		if pixel {
-			c = color.RGBA{0, 0, 0, 255}
-		}
-		display.SetPixel(x, y, c)
-		display.Display()
-
-		x += deltaX
-		y += deltaY
-
-		if x == 0 || x == 127 {
-			deltaX = -deltaX
-		}
-
-		if y == 0 || y == 31 {
-			deltaY = -deltaY
-		}
-		time.Sleep(1 * time.Millisecond)
-	}
-}

examples/ssd1306/i2c_128x64/main.go

@@ -1,60 +0,0 @@
-// This example shows how to use 128x64 display over I2C
-// Tested on Seeeduino XIAO Expansion Board https://wiki.seeedstudio.com/Seeeduino-XIAO-Expansion-Board/
-//
-// According to manual, I2C address of the display is 0x78, but that's 8-bit address.
-// TinyGo operates on 7-bit addresses and respective 7-bit address would be 0x3C, which we use below.
-//
-// To learn more about different types of I2C addresses, please see following page
-// https://www.totalphase.com/support/articles/200349176-7-bit-8-bit-and-10-bit-I2C-Slave-Addressing
-
-package main
-
-import (
-	"machine"
-
-	"image/color"
-	"time"
-
-	"tinygo.org/x/drivers/ssd1306"
-)
-
-func main() {
-	machine.I2C0.Configure(machine.I2CConfig{
-		Frequency: machine.TWI_FREQ_400KHZ,
-	})
-
-	display := ssd1306.NewI2C(machine.I2C0)
-	display.Configure(ssd1306.Config{
-		Address: 0x3C,
-		Width:   128,
-		Height:  64,
-	})
-
-	display.ClearDisplay()
-
-	x := int16(0)
-	y := int16(0)
-	deltaX := int16(1)
-	deltaY := int16(1)
-	for {
-		pixel := display.GetPixel(x, y)
-		c := color.RGBA{255, 255, 255, 255}
-		if pixel {
-			c = color.RGBA{0, 0, 0, 255}
-		}
-		display.SetPixel(x, y, c)
-		display.Display()
-
-		x += deltaX
-		y += deltaY
-
-		if x == 0 || x == 127 {
-			deltaX = -deltaX
-		}
-
-		if y == 0 || y == 63 {
-			deltaY = -deltaY
-		}
-		time.Sleep(1 * time.Millisecond)
-	}
-}

examples/ssd1306/main.go

@@ -0,0 +1,59 @@
+package main
+
+// This example shows how to use SSD1306 OLED display driver over I2C and SPI.
+//
+// Check the `newSSD1306Display()` functions for I2C and SPI initializations.
+
+import (
+	"runtime"
+
+	"image/color"
+	"time"
+)
+
+func main() {
+
+	display := newSSD1306Display()
+	display.ClearDisplay()
+
+	w, h := display.Size()
+	x := int16(0)
+	y := int16(0)
+	deltaX := int16(1)
+	deltaY := int16(1)
+
+	traceTime := time.Now().UnixMilli() + 1000
+	frames := 0
+	ms := runtime.MemStats{}
+
+	for {
+		pixel := display.GetPixel(x, y)
+		c := color.RGBA{255, 255, 255, 255}
+		if pixel {
+			c = color.RGBA{0, 0, 0, 255}
+		}
+		display.SetPixel(x, y, c)
+		display.Display()
+
+		x += deltaX
+		y += deltaY
+
+		if x == 0 || x == w-1 {
+			deltaX = -deltaX
+		}
+
+		if y == 0 || y == h-1 {
+			deltaY = -deltaY
+		}
+
+		frames++
+		now := time.Now().UnixMilli()
+		if now >= traceTime {
+			runtime.ReadMemStats(&ms)
+			println("TS", now, "| FPS", frames, "| HeapInuse", ms.HeapInuse)
+			traceTime = now + 1000
+			frames = 0
+		}
+	}
+
+}

examples/ssd1306/main_i2c_xiao-ble.go

@@ -0,0 +1,38 @@
+//go:build xiao_ble
+
+// This initializes SSD1306 OLED display driver over I2C.
+//
+// Seeed XIAO BLE board + SSD1306 128x32 I2C OLED display.
+//
+// Wiring:
+// - XIAO GND      -> OLED GND
+// - XIAO 3v3      -> OLED VCC
+// - XIAO D4 (SDA) -> OLED SDA
+// - XIAO D5 (SCL) -> OLED SCK
+//
+// For your case:
+// - Connect the display to I2C pins on your board.
+// - Adjust I2C address and display size as needed.
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ssd1306"
+)
+
+func newSSD1306Display() *ssd1306.Device {
+	machine.I2C0.Configure(machine.I2CConfig{
+		Frequency: 400 * machine.KHz,
+		SDA:       machine.SDA0_PIN,
+		SCL:       machine.SCL0_PIN,
+	})
+	display := ssd1306.NewI2C(machine.I2C0)
+	display.Configure(ssd1306.Config{
+		Address: ssd1306.Address_128_32, // or ssd1306.Address
+		Width:   128,
+		Height:  32, // or 64
+	})
+	return display
+}

examples/ssd1306/main_spi_thumby.go

@@ -0,0 +1,27 @@
+//go:build thumby
+
+// This initializes SSD1306 OLED display driver over SPI.
+//
+// Thumby board has a tiny built-in 72x40 display.
+//
+// As the display is built-in, no wiring is needed.
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ssd1306"
+)
+
+func newSSD1306Display() *ssd1306.Device {
+	machine.SPI0.Configure(machine.SPIConfig{})
+	display := ssd1306.NewSPI(machine.SPI0, machine.THUMBY_DC_PIN, machine.THUMBY_RESET_PIN, machine.THUMBY_CS_PIN)
+	display.Configure(ssd1306.Config{
+		Width:     72,
+		Height:    40,
+		ResetCol:  ssd1306.ResetValue{28, 99},
+		ResetPage: ssd1306.ResetValue{0, 5},
+	})
+	return display
+}

examples/ssd1306/main_spi_xiao-rp2040.go

@@ -0,0 +1,40 @@
+//go:build xiao_rp2040
+
+// This initializes SSD1306 OLED display driver over SPI.
+//
+// Seeed XIAO RP2040 board + SSD1306 128x64 SPI OLED display.
+//
+// Wiring:
+// - XIAO GND       -> OLED GND
+// - XIAO 3v3       -> OLED VCC
+// - XIAO D8 (SCK)  -> OLED D0
+// - XIAO D10 (SDO) -> OLED D1
+// - XIAO D4        -> OLED RES
+// - XIAO D5        -> OLED DC
+// - XIAO D6        -> OLED CS
+//
+// For your case:
+// - Connect the display to SPI pins on your board.
+// - Adjust RES, DC and CS pins as needed.
+// - Adjust SPI frequency as needed.
+// - Adjust display size as needed.
+
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/ssd1306"
+)
+
+func newSSD1306Display() *ssd1306.Device {
+	machine.SPI0.Configure(machine.SPIConfig{
+		Frequency: 50 * machine.MHz,
+	})
+	display := ssd1306.NewSPI(machine.SPI0, machine.D5, machine.D4, machine.D6)
+	display.Configure(ssd1306.Config{
+		Width:  128,
+		Height: 64,
+	})
+	return display
+}

examples/ssd1306/spi_128x64/main.go

@@ -1,48 +0,0 @@
-package main
-
-import (
-	"image/color"
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/ssd1306"
-)
-
-func main() {
-	machine.SPI0.Configure(machine.SPIConfig{
-		Frequency: 8000000,
-	})
-	display := ssd1306.NewSPI(machine.SPI0, machine.P8, machine.P7, machine.P9)
-	display.Configure(ssd1306.Config{
-		Width:  128,
-		Height: 64,
-	})
-
-	display.ClearDisplay()
-
-	x := int16(64)
-	y := int16(32)
-	deltaX := int16(1)
-	deltaY := int16(1)
-	for {
-		pixel := display.GetPixel(x, y)
-		c := color.RGBA{255, 255, 255, 255}
-		if pixel {
-			c = color.RGBA{0, 0, 0, 255}
-		}
-		display.SetPixel(x, y, c)
-		display.Display()
-
-		x += deltaX
-		y += deltaY
-
-		if x == 0 || x == 127 {
-			deltaX = -deltaX
-		}
-
-		if y == 0 || y == 63 {
-			deltaY = -deltaY
-		}
-		time.Sleep(1 * time.Millisecond)
-	}
-}

examples/ssd1306/spi_thumby/main.go

@@ -1,50 +0,0 @@
-// This example using the SSD1306 OLED display over SPI on the Thumby board
-// A very tiny 72x40 display.
-package main
-
-import (
-	"image/color"
-	"machine"
-	"time"
-
-	"tinygo.org/x/drivers/ssd1306"
-)
-
-func main() {
-	machine.SPI0.Configure(machine.SPIConfig{})
-	display := ssd1306.NewSPI(machine.SPI0, machine.THUMBY_DC_PIN, machine.THUMBY_RESET_PIN, machine.THUMBY_CS_PIN)
-	display.Configure(ssd1306.Config{
-		Width:     72,
-		Height:    40,
-		ResetCol:  ssd1306.ResetValue{28, 99},
-		ResetPage: ssd1306.ResetValue{0, 5},
-	})
-
-	display.ClearDisplay()
-
-	x := int16(36)
-	y := int16(20)
-	deltaX := int16(1)
-	deltaY := int16(1)
-	for {
-		pixel := display.GetPixel(x, y)
-		c := color.RGBA{255, 255, 255, 255}
-		if pixel {
-			c = color.RGBA{0, 0, 0, 255}
-		}
-		display.SetPixel(x, y, c)
-		display.Display()
-
-		x += deltaX
-		y += deltaY
-
-		if x == 0 || x == 71 {
-			deltaX = -deltaX
-		}
-
-		if y == 0 || y == 39 {
-			deltaY = -deltaY
-		}
-		time.Sleep(1 * time.Millisecond)
-	}
-}

examples/tmc2209/main.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/tmc2209"
+)
+
+func main() {
+	uart := machine.UART0
+	comm := tmc2209.NewUARTComm(*uart, 0)
+	// Create an instance of the TMC2209 with UART communication
+	tmc := tmc2209.NewTMC2209(comm, 0x00) // Replace 0x00 with the appropriate address
+
+	// Set up the TMC2209 driver
+	err := tmc.Setup()
+	if err != nil {
+		println("Failed to set up TMC2209: ", err)
+	}
+
+	// Write to a register (example: setting a register value)
+	err = tmc.WriteRegister(0x10, 0x12345678) // Replace 0x10 with the register address and 0x12345678 with the value
+	if err != nil {
+		println("Failed to write register:", err)
+	}
+
+	// Read from a register (example: reading a register value)
+	value, err := tmc.ReadRegister(0x10)
+	if err != nil {
+		println("Failed to read register: ", err)
+	}
+
+	// Output the read value
+	println("Register value: ", value)
+}

examples/tmc5160/main.go

@@ -0,0 +1,61 @@
+// Connects to SPI1 on a RP2040 (Pico)
+package main
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/tmc5160"
+)
+
+func main() {
+	// Step 1. Setup your protocol.  SPI setup shown below
+	spi := machine.SPI1
+	spi.Configure(machine.SPIConfig{
+		Frequency: 12000000, // Upto 12 MHZ is pretty stable. Reduce to 5 or 6 Mhz if you are experiencing issues
+		Mode:      3,
+		LSBFirst:  false,
+	})
+	// Step 2. Set up all associated Pins
+	csPin0 := machine.GPIO13
+	csPin0.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	enn0 := machine.GPIO18
+	enn0.Configure(machine.PinConfig{Mode: machine.PinOutput})
+
+	// csPins is a map of all chip select pins in a multi driver setup.
+	//Only one pin csPin0 mapped to "0"is shown in this example, but add more mappings as required
+	csPins := map[uint8]machine.Pin{0: csPin0}
+	//bind csPin to driverAdddress
+	driverAddress := uint8(0) // Let's assume we are working with driver at address 0x01
+	// Step 3. Bind the communication interface to the protocol
+	comm := tmc5160.NewSPIComm(spi, csPins)
+	// Step 4. Define your stepper like this below
+	//stepper := tmc5160.NewStepper(angle , gearRatio  vSupply  rCoil , lCoil , iPeak , rSense , mSteps, fclk )
+	stepper := tmc5160.NewDefaultStepper() // Default Stepper should be used only for testing.
+	// Step 5. Instantiate your driver
+	driver := tmc5160.NewDriver(
+		comm,
+		driverAddress,
+		enn0,
+		stepper)
+
+	// Setting and getting mode
+	rampMode := tmc5160.NewRAMPMODE(comm, driverAddress)
+	err := rampMode.SetMode(tmc5160.PositioningMode)
+	if err != nil {
+		return
+	}
+	mode, err := rampMode.GetMode()
+	if err != nil {
+		println("Error getting mode:", err)
+	} else {
+		println("Current Mode:", mode)
+	}
+
+	// Read GCONF register
+	GCONF := tmc5160.NewGCONF()
+	gconfVal, err := driver.ReadRegister(tmc5160.GCONF)
+	// Uppack the register to get all the bits and bytes of the register
+	GCONF.Unpack(gconfVal)
+	//E.g. MultiStepFlit is retrieved from the GCONF register
+	println("GCONF:MultiStepFlit:", GCONF.MultistepFilt)
+}

examples/touch/capacitive/main.go

@@ -0,0 +1,69 @@
+// Capacitive touch sensing example.
+//
+// This capacitive touch sensor works by charging a normal GPIO pin, then slowly
+// discharging it through a 1MΩ resistor and seeing how long it takes to go from
+// high to low.
+//
+// Use as follows:
+//   - Change touchPin below as needed.
+//   - Connect this pin to some metal surface, like a piece of aluminimum foil.
+//     Make sure this surface is covered (using paper, Scotch tape, etc).
+//   - Also connect this same pin to ground through a 1MΩ resistor.
+//
+// This sensor is very sensitive to noise on the power source, so you should
+// probably try to limit it by running from a battery for example. Especially
+// phone chargers can produce a lot of noise.
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/touch/capacitive"
+)
+
+const touchPin = machine.GP16 // Raspberry Pi Pico
+
+func main() {
+	time.Sleep(time.Second * 2)
+	println("start")
+
+	led := machine.LED
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	led.Low()
+
+	// Configure the array of GPIO pins used for capacitive touch sensing.
+	// We're using only one pin.
+	array := capacitive.NewArray([]machine.Pin{touchPin})
+
+	// Use a dynamic threshold, meaning the GPIO pin is automatically calibrated
+	// and re-calibrated to adjust for varying environments (e.g. changing
+	// humidity).
+	array.SetDynamicThreshold(100)
+
+	wasTouching := false
+	for i := uint32(0); ; i++ {
+		// Update the GPIO pin. This must be called very often.
+		array.Update()
+		touching := array.Touching(0)
+
+		// Indicate whether the pin is touched via the LED.
+		led.Set(touching)
+
+		// Print something when the touch state changed.
+		if wasTouching != touching {
+			wasTouching = touching
+			if touching {
+				println("  touch!")
+			} else {
+				println("  release!")
+			}
+		}
+
+		// Print the current value, as a debugging aid. It's not really meant to
+		// be used directly.
+		if i%128 == 32 {
+			println("touch value:", array.RawValue(0))
+		}
+	}
+}

examples/uc8151/main.go

@@ -3,7 +3,9 @@ package main
 import (
 	"image/color"
 	"machine"
+	"time"
 
+	"tinygo.org/x/drivers"
 	"tinygo.org/x/drivers/uc8151"
 )
 
@@ -14,30 +16,56 @@ func main() {
 	led = machine.LED
 	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	machine.SPI0.Configure(machine.SPIConfig{
-		Frequency: 12000000,
+		Frequency: 12 * machine.MHz,
 		SCK:       machine.EPD_SCK_PIN,
 		SDO:       machine.EPD_SDO_PIN,
 	})
 
 	display = uc8151.New(machine.SPI0, machine.EPD_CS_PIN, machine.EPD_DC_PIN, machine.EPD_RESET_PIN, machine.EPD_BUSY_PIN)
 	display.Configure(uc8151.Config{
-		Rotation: uc8151.ROTATION_270,
-		Speed:    uc8151.MEDIUM,
-		Blocking: true,
+		Rotation:    drivers.Rotation270,
+		Speed:       uc8151.TURBO,
+		FlickerFree: true,
+		Blocking:    false,
 	})
 	black := color.RGBA{1, 1, 1, 255}
 
-	display.ClearBuffer()
-	display.Display()
-	for i := int16(0); i < 37; i++ {
-		for j := int16(0); j < 16; j++ {
-			if (i+j)%2 == 0 {
-				showRect(i*8, j*8, 8, 8, black)
+	display.ClearDisplay()
+
+	mod := int16(1)
+	for {
+		// checkerboard
+		for i := int16(0); i < 11; i++ {
+			if mod == 1 {
+				mod = 0
+			} else {
+				mod = 1
+			}
+
+			display.ClearBuffer()
+			for i := int16(0); i < 37; i++ {
+				for j := int16(0); j < 16; j++ {
+					if (i+j)%2 == mod {
+						showRect(i*8, j*8, 8, 8, black)
+					}
+				}
+			}
+			display.Display()
+			time.Sleep(500 * time.Millisecond)
+		}
+
+		// moving line
+		for i := int16(16); i < 21; i++ {
+			display.ClearBuffer()
+			for j := int16(0); j < 16; j++ {
+				if (i+j)%2 == 0 {
+					showRect(i*8, j*8, 8, 8, black)
+				}
+				display.Display()
+				time.Sleep(250 * time.Millisecond)
 			}
 		}
 	}
-
-	display.Display()
 }
 
 func showRect(x int16, y int16, w int16, h int16, c color.RGBA) {

examples/waveshare-epd/epd1in54/main.go

@@ -0,0 +1,36 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+
+	"tinygo.org/x/drivers/waveshare-epd/epd1in54"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/gophers"
+)
+
+var (
+	spi0 = machine.SPI0
+	cs   = machine.D10
+	dc   = machine.D9
+	rst  = machine.D6
+	busy = machine.D5
+
+	black = color.RGBA{R: 1, G: 1, B: 1, A: 255}
+)
+
+func main() {
+	display := epd1in54.New(spi0, cs, dc, rst, busy)
+
+	display.LDirInit(epd1in54.Config{})
+	display.Clear()
+	display.ClearBuffer()
+
+	tinyfont.WriteLineRotated(&display, &gophers.Regular58pt, 150, 0, "A B C", black, tinyfont.ROTATION_90)
+	tinyfont.WriteLineRotated(&display, &gophers.Regular58pt, 100, 0, "D E F", black, tinyfont.ROTATION_90)
+	tinyfont.WriteLineRotated(&display, &gophers.Regular58pt, 50, 0, "G H I", black, tinyfont.ROTATION_90)
+	tinyfont.WriteLineRotated(&display, &gophers.Regular58pt, 0, 0, "J K L", black, tinyfont.ROTATION_90)
+
+	display.Display()
+	display.Sleep()
+}

examples/waveshare-epd/epd2in66b/main.go

@@ -0,0 +1,84 @@
+package main
+
+import (
+	"image/color"
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/waveshare-epd/epd2in66b"
+	"tinygo.org/x/tinyfont"
+	"tinygo.org/x/tinyfont/freemono"
+)
+
+var (
+	black = color.RGBA{0, 0, 0, 0xff}
+	white = color.RGBA{0xff, 0xff, 0xff, 0xff}
+	red   = color.RGBA{0xff, 0, 0, 0xff}
+)
+
+func main() {
+	machine.Serial.Configure(machine.UARTConfig{})
+	time.Sleep(2 * time.Second)
+
+	machine.SPI1.Configure(machine.SPIConfig{
+		Frequency: epd2in66b.Baudrate,
+	})
+
+	println("started")
+
+	// in case you have a Pico module, you can directly use
+	// dev, err := epd2in66b.NewPicoModule()
+
+	display := epd2in66b.New(machine.SPI1)
+
+	cfg := epd2in66b.Config{
+		DataPin:       machine.GP8,
+		ChipSelectPin: machine.GP9,
+		ResetPin:      machine.GP12,
+		BusyPin:       machine.GP13,
+	}
+	err := display.Configure(cfg)
+	if err != nil {
+		panic(err)
+	}
+
+	err = display.Reset()
+	if err != nil {
+		panic(err)
+	}
+
+	println("draw checkerboard")
+	drawCheckerBoard(&display)
+
+	println("draw 'hello'")
+	tinyfont.WriteLineRotated(&display, &freemono.Bold24pt7b, 40, 10, "Hello!", white, tinyfont.ROTATION_90)
+	tinyfont.WriteLineRotated(&display, &freemono.Bold12pt7b, 10, 10, "tinygo rocks", white, tinyfont.ROTATION_90)
+	err = display.Display()
+	if err != nil {
+		panic(err)
+	}
+}
+
+func drawCheckerBoard(display drivers.Displayer) {
+	s := 8
+	width, height := display.Size()
+	for x := 0; x <= int(width)-s; x += s {
+		for y := 0; y <= int(height)-s; y += s {
+			c := red
+			if (x/s)%2 == (y/s)%2 {
+				c = black
+			}
+
+			showRect(display, x, y, s, s, c)
+		}
+	}
+}
+
+func showRect(display drivers.Displayer, x int, y int, w int, h int, c color.RGBA) {
+	for i := x; i < x+w; i++ {
+		for j := y; j < y+h; j++ {
+			display.SetPixel(int16(i), int16(j), c)
+		}
+	}
+}

examples/ws2812/arduino.go

@@ -4,7 +4,8 @@ package main
 
 import "machine"
 
-// Replace neo and led in the code below to match the pin
-// that you are using if different.
-var neo = machine.D2
-var led = machine.LED
+func init() {
+	// Replace neo in the code below to match the pin
+	// that you are using if different.
+	neo = machine.D2
+}

examples/ws2812/digispark.go

@@ -4,8 +4,9 @@ package main
 
 import "machine"
 
-// This is the pin assignment for the Digispark only.
-// Replace neo and led in the code below to match the pin
-// that you are using if different.
-var neo machine.Pin = 0
-var led = machine.LED
+func init() {
+	// This is the pin assignment for the Digispark only.
+	// Replace neo and led in the code below to match the pin
+	// that you are using if different.
+	neo = machine.Pin(0)
+}

examples/ws2812/main.go

@@ -12,11 +12,12 @@ import (
 	"tinygo.org/x/drivers/ws2812"
 )
 
-var leds [10]color.RGBA
+var (
+	neo  machine.Pin
+	leds [10]color.RGBA
+)
 
 func main() {
-	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
-
 	neo.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
 	ws := ws2812.NewWS2812(neo)
@@ -35,7 +36,6 @@ func main() {
 		}
 
 		ws.WriteColors(leds[:])
-		led.Set(rg)
 		time.Sleep(100 * time.Millisecond)
 	}
 }

examples/ws2812/others.go

@@ -1,10 +1,11 @@
-//go:build !digispark && !arduino && !qtpy && !m5stamp_c3 && !thingplus_rp2040
+//go:build !digispark && !arduino
 
 package main
 
 import "machine"
 
-// Replace neo and led in the code below to match the pin
-// that you are using if different.
-var neo machine.Pin = machine.WS2812
-var led = machine.LED
+func init() {
+	// Replace neo in the code below to match the pin
+	// that you are using if different.
+	neo = machine.WS2812
+}

examples/ws2812/others_wo_led.go

@@ -1,10 +0,0 @@
-//go:build qtpy || m5stamp_c3
-
-package main
-
-import "machine"
-
-// Replace neo and led in the code below to match the pin
-// that you are using if different.
-var neo machine.Pin = machine.WS2812
-var led = machine.NoPin

examples/ws2812/thingplus-rp2040.go

@@ -1,12 +0,0 @@
-//go:build thingplus_rp2040
-
-package main
-
-import "machine"
-
-// This is the pin assignment for the internal neopixel of the
-// Sparkfun thingplus rp2040.
-// Replace neo and led in the code below to match the pin
-// that you are using if different.
-var neo machine.Pin = machine.GPIO8
-var led = machine.LED

flash/devices.go

@@ -46,6 +46,10 @@ var DefaultDeviceIdentifier = DeviceIdentifierFunc(func(id JedecID) Attrs {
 		return GD25Q16C()
 	case 0xC84017:
 		return GD25Q64C()
+	case 0x856015:
+		return P25Q16H()
+	case 0xEF4014:
+		return W25Q80DV()
 	case 0xEF4015:
 		return W25Q16JVIQ()
 	case 0xEF4016:
@@ -239,6 +243,24 @@ func GD25Q64C() Attrs {
 	}
 }
 
+// Settings for the Puya P25Q16H 2MiB SPI flash.
+// Datasheet: https://files.seeedstudio.com/wiki/github_weiruanexample/Flash_P25Q16H-UXH-IR_Datasheet.pdf
+func P25Q16H() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0x85, 0x60, 0x15},
+		MaxClockSpeedMHz:    55,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: true,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  true,
+		WriteStatusSplit:    true,
+		SingleStatusByte:    false,
+	}
+}
+
 // Settings for the Winbond W25Q16JV-IQ 2MiB SPI flash. Note that JV-IM has a
 // different .memory_type (0x70) Datasheet:
 // https://www.winbond.com/resource-files/w25q16jv%20spi%20revf%2005092017.pdf
@@ -380,6 +402,25 @@ func W25Q80DL() Attrs {
 		TotalSize:           1 << 20, // 1 MiB
 		StartUp:             5000 * time.Microsecond,
 		JedecID:             JedecID{0xEF, 0x60, 0x14},
+		MaxClockSpeedMHz:    80,
+		QuadEnableBitMask:   0x02,
+		HasSectorProtection: false,
+		SupportsFastRead:    true,
+		SupportsQSPI:        true,
+		SupportsQSPIWrites:  false,
+		WriteStatusSplit:    false,
+		SingleStatusByte:    false,
+	}
+}
+
+// Settings for the Winbond W25Q80DV 2MiB SPI flash.
+// Datasheet:
+// https://www.winbond.com/resource-files/w25q80dv%20dl_revh_10022015.pdf
+func W25Q80DV() Attrs {
+	return Attrs{
+		TotalSize:           1 << 21, // 2 MiB
+		StartUp:             5000 * time.Microsecond,
+		JedecID:             JedecID{0xEF, 0x40, 0x14},
 		MaxClockSpeedMHz:    104,
 		QuadEnableBitMask:   0x02,
 		HasSectorProtection: false,

ft6336/ft6336.go

@@ -5,8 +5,6 @@
 package ft6336
 
 import (
-	"machine"
-
 	"tinygo.org/x/drivers"
 	"tinygo.org/x/drivers/internal/legacy"
 	"tinygo.org/x/drivers/touch"
@@ -14,19 +12,21 @@ import (
 
 // Device wraps FT6336 I2C Self-Capacitive touch
 type Device struct {
-	bus     drivers.I2C
-	buf     []byte
-	Address uint8
-	intPin  machine.Pin
+	bus           drivers.I2C
+	buf           []byte
+	Address       uint8
+	configurePins func()
 }
 
 // New returns FT6336 device for the provided I2C bus using default address.
-func New(i2c drivers.I2C, intPin machine.Pin) *Device {
+func New(i2c drivers.I2C, intPin drivers.PinInput) *Device {
 	return &Device{
 		bus:     i2c,
 		buf:     make([]byte, 11),
 		Address: Address,
-		intPin:  intPin,
+		configurePins: func() {
+			legacy.ConfigurePinInputPulldown(intPin)
+		},
 	}
 }
 
@@ -36,8 +36,11 @@ type Config struct {
 
 // Configure the FT6336 device.
 func (d *Device) Configure(config Config) error {
+	if d.configurePins == nil {
+		return legacy.ErrConfigBeforeInstantiated
+	}
 	d.write1Byte(0xA4, 0x00)
-	d.intPin.Configure(machine.PinConfig{Mode: machine.PinInputPulldown})
+	d.configurePins()
 	return nil
 }
 
@@ -80,7 +83,8 @@ func (d *Device) Read() []byte {
 func (d *Device) ReadTouchPoint() touch.Point {
 	d.Read()
 	z := 0xFFFFF
-	if d.buf[0] == 0 {
+	switch d.buf[0] {
+	case 0, 255:
 		z = 0
 	}
 

gc9a01/gc9a01.go

@@ -5,12 +5,12 @@ package gc9a01 // import "tinygo.org/x/drivers/gc9a01"
 
 import (
 	"image/color"
-	"machine"
 	"time"
 
 	"errors"
 
 	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 // Rotation controls the rotation used by the display.
@@ -22,10 +22,10 @@ type FrameRate uint8
 // Device wraps an SPI connection.
 type Device struct {
 	bus             drivers.SPI
-	dcPin           machine.Pin
-	resetPin        machine.Pin
-	csPin           machine.Pin
-	blPin           machine.Pin
+	dcPin           drivers.PinOutputFunc
+	resetPin        drivers.PinOutputFunc
+	csPin           drivers.PinOutputFunc
+	blPin           drivers.PinOutputFunc
 	width           int16
 	height          int16
 	columnOffsetCfg int16
@@ -52,17 +52,17 @@ type Config struct {
 }
 
 // New creates a new ST7789 connection. The SPI wire must already be configured.
-func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin machine.Pin) Device {
-	resetPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	dcPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	csPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	blPin.Configure(machine.PinConfig{Mode: machine.PinOutput})
+func New(bus drivers.SPI, resetPin, dcPin, csPin, blPin drivers.PinOutput) Device {
+	legacy.ConfigurePinOut(resetPin)
+	legacy.ConfigurePinOut(dcPin)
+	legacy.ConfigurePinOut(csPin)
+	legacy.ConfigurePinOut(blPin)
 	return Device{
 		bus:      bus,
-		resetPin: resetPin,
-		dcPin:    dcPin,
-		csPin:    csPin,
-		blPin:    blPin,
+		resetPin: resetPin.Set,
+		dcPin:    dcPin.Set,
+		csPin:    csPin.Set,
+		blPin:    blPin.Set,
 	}
 }
 
@@ -226,7 +226,7 @@ func (d *Device) Data(data uint8) {
 
 // Tx sends data to the display
 func (d *Device) Tx(data []byte, isCommand bool) {
-	d.dcPin.Set(!isCommand)
+	d.dcPin(!isCommand)
 	d.bus.Tx(data, nil)
 }
 

go.mod

@@ -1,20 +1,25 @@
 module tinygo.org/x/drivers
 
-go 1.18
+
+go 1.22.1
+
+toolchain go1.23.1
+
 
 require (
 	github.com/eclipse/paho.mqtt.golang v1.2.0
 	github.com/frankban/quicktest v1.10.2
 	github.com/google/shlex v0.0.0-20191202100458-e7afc7fbc510
+	github.com/orsinium-labs/tinymath v1.1.0
 	github.com/soypat/natiu-mqtt v0.5.1
-	golang.org/x/net v0.7.0
+	golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d
+	golang.org/x/net v0.33.0
 	tinygo.org/x/tinyfont v0.3.0
 	tinygo.org/x/tinyterm v0.1.0
 )
 
 require (
-	github.com/google/go-cmp v0.5.2 // indirect
+	github.com/google/go-cmp v0.6.0 // indirect
 	github.com/kr/pretty v0.2.1 // indirect
 	github.com/kr/text v0.1.0 // indirect
-	golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543 // indirect
 )

go.sum

@@ -3,8 +3,9 @@ github.com/eclipse/paho.mqtt.golang v1.2.0 h1:1F8mhG9+aO5/xpdtFkW4SxOJB67ukuDC3t
 github.com/eclipse/paho.mqtt.golang v1.2.0/go.mod h1:H9keYFcgq3Qr5OUJm/JZI/i6U7joQ8SYLhZwfeOo6Ts=
 github.com/frankban/quicktest v1.10.2 h1:19ARM85nVi4xH7xPXuc5eM/udya5ieh7b/Sv+d844Tk=
 github.com/frankban/quicktest v1.10.2/go.mod h1:K+q6oSqb0W0Ininfk863uOk1lMy69l/P6txr3mVT54s=
-github.com/google/go-cmp v0.5.2 h1:X2ev0eStA3AbceY54o37/0PQ/UWqKEiiO2dKL5OPaFM=
 github.com/google/go-cmp v0.5.2/go.mod h1:v8dTdLbMG2kIc/vJvl+f65V22dbkXbowE6jgT/gNBxE=
+github.com/google/go-cmp v0.6.0 h1:ofyhxvXcZhMsU5ulbFiLKl/XBFqE1GSq7atu8tAmTRI=
+github.com/google/go-cmp v0.6.0/go.mod h1:17dUlkBOakJ0+DkrSSNjCkIjxS6bF9zb3elmeNGIjoY=
 github.com/google/shlex v0.0.0-20191202100458-e7afc7fbc510 h1:El6M4kTTCOh6aBiKaUGG7oYTSPP8MxqL4YI3kZKwcP4=
 github.com/google/shlex v0.0.0-20191202100458-e7afc7fbc510/go.mod h1:pupxD2MaaD3pAXIBCelhxNneeOaAeabZDe5s4K6zSpQ=
 github.com/kr/pretty v0.2.1 h1:Fmg33tUaq4/8ym9TJN1x7sLJnHVwhP33CNkpYV/7rwI=
@@ -12,12 +13,15 @@ github.com/kr/pretty v0.2.1/go.mod h1:ipq/a2n7PKx3OHsz4KJII5eveXtPO4qwEXGdVfWzfn
 github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
 github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
 github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
+github.com/orsinium-labs/tinymath v1.1.0 h1:KomdsyLHB7vE3f1nRAJF2dyf1m/gnM2HxfTeV1vS5UA=
+github.com/orsinium-labs/tinymath v1.1.0/go.mod h1:WPXX6ei3KSXG7JfA03a+ekCYaY9SWN4I+JRl2p6ck+A=
 github.com/soypat/natiu-mqtt v0.5.1 h1:rwaDmlvjzD2+3MCOjMZc4QEkDkNwDzbct2TJbpz+TPc=
 github.com/soypat/natiu-mqtt v0.5.1/go.mod h1:xEta+cwop9izVCW7xOx2W+ct9PRMqr0gNVkvBPnQTc4=
 github.com/valyala/fastjson v1.6.3/go.mod h1:CLCAqky6SMuOcxStkYQvblddUtoRxhYMGLrsQns1aXY=
-golang.org/x/net v0.7.0 h1:rJrUqqhjsgNp7KqAIc25s9pZnjU7TUcSY7HcVZjdn1g=
-golang.org/x/net v0.7.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
-golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543 h1:E7g+9GITq07hpfrRu66IVDexMakfv52eLZ2CXBWiKr4=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d h1:0olWaB5pg3+oychR51GUVCEsGkeCU/2JxjBgIo4f3M0=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d/go.mod h1:qj5a5QZpwLU2NLQudwIN5koi3beDhSAlJwa67PuM98c=
+golang.org/x/net v0.33.0 h1:74SYHlV8BIgHIFC/LrYkOGIwL19eTYXQ5wc6TBuO36I=
+golang.org/x/net v0.33.0/go.mod h1:HXLR5J+9DxmrqMwG9qjGCxZ+zKXxBru04zlTvWlWuN4=
 golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 tinygo.org/x/drivers v0.14.0/go.mod h1:uT2svMq3EpBZpKkGO+NQHjxjGf1f42ra4OnMMwQL2aI=
 tinygo.org/x/drivers v0.15.1/go.mod h1:uT2svMq3EpBZpKkGO+NQHjxjGf1f42ra4OnMMwQL2aI=

gps/gps.go

@@ -69,10 +69,16 @@ func NewUART(uart drivers.UART) Device {
 }
 
 // NewI2C creates a new I2C GPS connection.
+// Uses the default i2c address (0x42) for backward compatibility reasons.
 func NewI2C(bus drivers.I2C) Device {
+	return NewI2CWithAddress(bus, I2C_ADDRESS)
+}
+
+// NewI2CWithAddress creates a new I2C GPS connection on the provided address
+func NewI2CWithAddress(bus drivers.I2C, i2cAddress uint16) Device {
 	return Device{
 		bus:      bus,
-		address:  I2C_ADDRESS,
+		address:  i2cAddress,
 		buffer:   make([]byte, bufferSize),
 		bufIdx:   bufferSize,
 		sentence: strings.Builder{},

gps/gpsparser.go

@@ -96,7 +96,10 @@ func (parser *Parser) Parse(sentence string) (Fix, error) {
 		fix.Speed = findSpeed(fields[7])
 		fix.Heading = findHeading(fields[8])
 		date := findDate(fields[9])
-		fix.Time = fix.Time.AddDate(date.Year(), int(date.Month()), date.Day())
+		fix.Time = date.Add(time.Duration(fix.Time.Hour())*time.Hour +
+			time.Duration(fix.Time.Minute())*time.Minute +
+			time.Duration(fix.Time.Second())*time.Second +
+			time.Duration(fix.Time.Nanosecond())*time.Nanosecond)
 
 		return fix, nil
 	}

gps/gpsparser_test.go

@@ -70,15 +70,15 @@ func TestParseRMC(t *testing.T) {
 		t.Error("should have errInvalidRMCSentence error")
 	}
 
-	val = "$GPRMC,203522.00,A,5109.0262308,N,11401.8407342,W,0.004,133.4,130522,0.0,E,D*2B"
+	val = "$GPRMC,203522.00,A,5109.0262308,N,11401.8407342,W,0.004,133.4,010622,0.0,E,D*2B"
 	fix, err := p.Parse(val)
 	if err != nil {
 		t.Error("should have parsed")
 	}
 
 	c.Assert(fix.Time.Year(), qt.Equals, 2022)
-	c.Assert(fix.Time.Month(), qt.Equals, time.May)
-	c.Assert(fix.Time.Day(), qt.Equals, 13)
+	c.Assert(fix.Time.Month(), qt.Equals, time.June)
+	c.Assert(fix.Time.Day(), qt.Equals, 1)
 	c.Assert(fix.Time.Hour(), qt.Equals, 20)
 	c.Assert(fix.Time.Minute(), qt.Equals, 35)
 	c.Assert(fix.Time.Second(), qt.Equals, 22)

gps/registers.go

@@ -4,7 +4,11 @@ package gps
 
 // The I2C address which this device listens to.
 const (
-	I2C_ADDRESS = 0x42
+	// To ensure backward compatibility
+	I2C_ADDRESS = UBLOX_I2C_ADDRESS
+
+	UBLOX_I2C_ADDRESS   = 0x42
+	PA1010D_I2C_ADDRESS = 0x10
 )
 
 const (

hcsr04/hcsr04.go

@@ -5,30 +5,39 @@
 package hcsr04
 
 import (
-	"machine"
 	"time"
+
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
 )
 
 const TIMEOUT = 23324 // max sensing distance (4m)
 
 // Device holds the pins
 type Device struct {
-	trigger machine.Pin
-	echo    machine.Pin
+	trigger       drivers.PinOutputFunc
+	echo          drivers.PinInputFunc
+	configurePins func()
 }
 
 // New returns a new ultrasonic driver given 2 pins
-func New(trigger, echo machine.Pin) Device {
+func New(trigger drivers.PinOutput, echo drivers.PinInput) Device {
 	return Device{
-		trigger: trigger,
-		echo:    echo,
+		trigger: trigger.Set,
+		echo:    echo.Get,
+		configurePins: func() {
+			legacy.ConfigurePinOut(trigger)
+			legacy.ConfigurePinInput(echo)
+		},
 	}
 }
 
 // Configure configures the pins of the Device
 func (d *Device) Configure() {
-	d.trigger.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	d.echo.Configure(machine.PinConfig{Mode: machine.PinInput})
+	if d.configurePins == nil {
+		panic(legacy.ErrConfigBeforeInstantiated)
+	}
+	d.configurePins()
 }
 
 // ReadDistance returns the distance of the object in mm
@@ -52,7 +61,7 @@ func (d *Device) ReadPulse() int32 {
 	d.trigger.Low()
 	i := uint8(0)
 	for {
-		if d.echo.Get() {
+		if d.echo() {
 			t = time.Now()
 			break
 		}
@@ -66,7 +75,7 @@ func (d *Device) ReadPulse() int32 {
 	}
 	i = 0
 	for {
-		if !d.echo.Get() {
+		if !d.echo() {
 			return int32(time.Since(t).Microseconds())
 		}
 		i++

hd44780/hd44780.go

@@ -210,7 +210,7 @@ func (d *Device) SendCommand(command byte) {
 	d.bus.SetCommandMode(true)
 	d.bus.Write([]byte{command})
 
-	for d.busy(command == DISPLAY_CLEAR || command == CURSOR_HOME) {
+	for d.isBusy(command == DISPLAY_CLEAR || command == CURSOR_HOME) {
 	}
 }
 
@@ -219,7 +219,7 @@ func (d *Device) sendData(data byte) {
 	d.bus.SetCommandMode(false)
 	d.bus.Write([]byte{data})
 
-	for d.busy(false) {
+	for d.isBusy(false) {
 	}
 }
 
@@ -231,9 +231,9 @@ func (d *Device) CreateCharacter(cgramAddr uint8, data []byte) {
 	}
 }
 
-// busy returns true when hd447890 is busy
+// isBusy returns true when hd447890 is isBusy
 // or after the timeout specified
-func (d *Device) busy(longDelay bool) bool {
+func (d *Device) isBusy(longDelay bool) bool {
 	if d.bus.WriteOnly() {
 		// Can't read busy flag if write only, so sleep a bit then return
 		if longDelay {
@@ -261,7 +261,7 @@ func (d *Device) busy(longDelay bool) bool {
 
 // Busy returns true when hd447890 is busy
 func (d *Device) Busy() bool {
-	return d.busy(false)
+	return d.isBusy(false)
 }
 
 // Size returns the current size of the display.

hub75/hub75.go

@@ -167,7 +167,7 @@ func (d *Device) fillMatrixBuffer(x int16, y int16, r uint8, g uint8, b uint8) {
 		if r > colorTresh {
 			d.buffer[c][offsetR] |= 1 << bitSelect
 		} else {
-			d.buffer[c][offsetR] = d.buffer[c][offsetR] &^ 1 << bitSelect
+			d.buffer[c][offsetR] &^= 1 << bitSelect
 		}
 		if g > colorTresh {
 			d.buffer[(c+d.colorThirdStep)%d.colorDepth][offsetG] |= 1 << bitSelect

ili9341/spi_atsamd21.go

@@ -8,10 +8,10 @@ import (
 )
 
 type spiDriver struct {
-	bus machine.SPI
+	bus *machine.SPI
 }
 
-func NewSPI(bus machine.SPI, dc, cs, rst machine.Pin) *Device {
+func NewSPI(bus *machine.SPI, dc, cs, rst machine.Pin) *Device {
 	return &Device{
 		dc:  dc,
 		cs:  cs,

ili9341/spi_atsamd51.go

@@ -8,10 +8,10 @@ import (
 )
 
 type spiDriver struct {
-	bus machine.SPI
+	bus *machine.SPI
 }
 
-func NewSPI(bus machine.SPI, dc, cs, rst machine.Pin) *Device {
+func NewSPI(bus *machine.SPI, dc, cs, rst machine.Pin) *Device {
 	return &Device{
 		dc:  dc,
 		cs:  cs,

ina219/config.go

@@ -0,0 +1,183 @@
+package ina219
+
+type Config struct {
+	// BusVoltageRange sets the bus voltage range.
+	BusVoltageRange BusVoltageRange
+
+	// PGA sets the programmable gain amplifier.
+	PGA PGA
+
+	// BusADC sets the bus ADC resolution.
+	BusADC BusADC
+
+	// ShuntADC sets the shunt ADC resolution.
+	ShuntADC ShuntADC
+
+	// Mode sets the operating mode.
+	Mode Mode
+
+	// Calibration sets the calibration value for the expected
+	// voltage and current values.
+	Calibration Calibration
+
+	// 1000 / uA per bit
+	CurrentDivider float32
+
+	// 1mW per bit
+	PowerMultiplier float32
+}
+
+// RegisterValue returns the register value of the configuration.
+func (c *Config) RegisterValue() uint16 {
+	return c.BusVoltageRange.RegisterValue() |
+		c.PGA.RegisterValue() |
+		c.BusADC.RegisterValue() |
+		c.ShuntADC.RegisterValue() |
+		c.Mode.RegisterValue()
+}
+
+// Generate a new configuration from a register value.
+func NewConfig(config int16, calibration int16) Config {
+	return Config{
+		BusVoltageRange: BusVoltageRange(config >> 13 & 0x1),
+		PGA:             PGA(config >> 11 & 0x3),
+		BusADC:          BusADC(config >> 7 & 0xF),
+		ShuntADC:        ShuntADC(config >> 3 & 0xF),
+		Mode:            Mode(config & 0x7),
+		Calibration:     Calibration(calibration),
+	}
+}
+
+// Configurations from
+// https://github.com/adafruit/Adafruit_INA219/blob/master/Adafruit_INA219.cpp
+var (
+	// Config32V2A is a configuration for a 32V 2A range.
+	Config32V2A = Config{
+		BusVoltageRange: Range32V,
+		PGA:             PGA8,
+		BusADC:          ADC12,
+		ShuntADC:        SADC12,
+		Mode:            ModeContShuntBus,
+		Calibration:     Calibration16V400mA,
+		CurrentDivider:  10.0,
+		PowerMultiplier: 2.0,
+	}
+
+	// Config32V1A is a configuration for a 32V 1A range.
+	Config32V1A = Config{
+		BusVoltageRange: Range32V,
+		PGA:             PGA8,
+		BusADC:          ADC12,
+		ShuntADC:        SADC12,
+		Mode:            ModeContShuntBus,
+		Calibration:     Calibration32V1A,
+		CurrentDivider:  25.0,
+		PowerMultiplier: 0.8,
+	}
+
+	// Config16V400mA is a configuration for a 16V 400mA range.
+	Config16V400mA = Config{
+		BusVoltageRange: Range16V,
+		PGA:             PGA1,
+		BusADC:          ADC12,
+		ShuntADC:        SADC12,
+		Mode:            ModeContShuntBus,
+		Calibration:     Calibration16V400mA,
+		CurrentDivider:  20.0,
+		PowerMultiplier: 1.0,
+	}
+)
+
+// BusVoltageRange is the bus voltage range.
+type BusVoltageRange int8
+
+const (
+	Range16V BusVoltageRange = 0 // 0-16V
+	Range32V BusVoltageRange = 1 // 0-32V
+)
+
+func (r BusVoltageRange) RegisterValue() uint16 {
+	return uint16(r) << 13
+}
+
+// PGA is the programmable gain amplifier.
+type PGA int8
+
+const (
+	PGA1 PGA = 0 // 40mV
+	PGA2 PGA = 1 // 80mV
+	PGA4 PGA = 2 // 160mV
+	PGA8 PGA = 3 // 320mV
+)
+
+func (p PGA) RegisterValue() uint16 {
+	return uint16(p) << 11
+}
+
+// BusADC is the bus ADC resolution.
+type BusADC int8
+
+const (
+	ADC9  BusADC = 0 // 9-bit
+	ADC10 BusADC = 1 // 10-bit
+	ADC11 BusADC = 2 // 11-bit
+	ADC12 BusADC = 3 // 12-bit
+)
+
+func (b BusADC) RegisterValue() uint16 {
+	return uint16(b) << 7
+}
+
+// ShuntADC is the shunt ADC resolution.
+type ShuntADC int8
+
+const (
+	SADC9  ShuntADC = 0 // 9-bit
+	SADC10 ShuntADC = 1 // 10-bit
+	SADC11 ShuntADC = 2 // 11-bit
+	SADC12 ShuntADC = 3 // 12-bit
+)
+
+func (s ShuntADC) RegisterValue() uint16 {
+	return uint16(s) << 3
+}
+
+// Mode is the operating mode.
+type Mode int8
+
+const (
+	ModePowerDown    Mode = 0 // power-down
+	ModeTrigShunt    Mode = 1 // triggered shunt voltage
+	ModeTrigBus      Mode = 2 // triggered bus voltage
+	ModeTrigShuntBus Mode = 3 // triggered shunt and bus voltage
+	ModeADCOff       Mode = 4 // ADC off
+	ModeContShunt    Mode = 5 // continuous shunt voltage
+	ModeContBus      Mode = 6 // continuous bus voltage
+	ModeContShuntBus Mode = 7 // continuous shunt and bus voltage
+)
+
+// ModeTriggered is a mask for triggered modes.
+const ModeTriggeredMask Mode = 0x4
+
+// ModeTriggered returns true if the mode is a triggered mode.
+func ModeTriggered(m Mode) bool {
+	return m != ModePowerDown && m&ModeTriggeredMask == 0
+}
+
+func (m Mode) RegisterValue() uint16 {
+	return uint16(m)
+}
+
+// Calibration is the calibration register for the INA219. Values from:
+// https://github.com/adafruit/Adafruit_INA219/blob/master/Adafruit_INA219.cpp
+type Calibration uint16
+
+const (
+	Calibration32V2A    Calibration = 4096
+	Calibration32V1A    Calibration = 10240
+	Calibration16V400mA Calibration = 8192
+)
+
+func (c Calibration) RegisterValue() uint16 {
+	return uint16(c)
+}

ina219/errors.go

@@ -0,0 +1,13 @@
+package ina219
+
+type ErrOverflow struct{}
+
+func (e ErrOverflow) Error() string { return "overflow" }
+
+type ErrNotReady struct{}
+
+func (e ErrNotReady) Error() string { return "not ready" }
+
+type ErrConfigMismatch struct{}
+
+func (e ErrConfigMismatch) Error() string { return "config mismatch" }

ina219/ina219.go

@@ -0,0 +1,202 @@
+package ina219
+
+import (
+	"tinygo.org/x/drivers"
+	"tinygo.org/x/drivers/internal/legacy"
+)
+
+// An INA219 device.
+type Device struct {
+	bus     drivers.I2C
+	Address uint16
+	config  Config
+}
+
+// Create a new INA219 device with the default configuration
+// and the given I2C bus at the default address.
+//
+// Set Address after New to change the address.
+//
+// Call Configure after New to write the configuration to the
+// device. If you don't call Configure, the device may have a
+// different configuration and the power divider and current
+// multiplier are probably wrong.
+func New(bus drivers.I2C) Device {
+	return Device{
+		bus:     bus,
+		Address: Address,
+		config:  Config32V2A,
+	}
+}
+
+// Set the configuration for the device. This only changes the
+// configuration in memory, not on the device. Call Configure
+// to write the configuration to the device.
+func (d *Device) SetConfig(config Config) {
+	d.config = config
+}
+
+// Write the current configuration to the device.
+func (d *Device) Configure() (err error) {
+	if err = d.WriteRegister(
+		RegConfig,
+		d.config.RegisterValue(),
+	); err != nil {
+		return
+	}
+
+	if err = d.WriteRegister(
+		RegCalibration,
+		d.config.Calibration.RegisterValue(),
+	); err != nil {
+		return
+	}
+
+	var readConfig Config
+	// make sure the configuration is read back correctly
+	if readConfig, err = d.ReadConfig(); err != nil {
+		return
+	} else if readConfig.RegisterValue() != d.config.RegisterValue() {
+		err = ErrConfigMismatch{}
+	} else if readConfig.Calibration.RegisterValue() != d.config.Calibration.RegisterValue() {
+		err = ErrConfigMismatch{}
+	}
+
+	return
+}
+
+// Trigger a conversion. This is only necessary if the device is in
+// trigger mode. In continuous mode (the default), the device will
+// automatically trigger conversions and this has no effect. See
+// config.go.
+//
+// Triggering a conversion or reading the "power" register resets
+// the conversion ready bit.
+func (d *Device) Trigger() (err error) {
+	// Only trigger if the mode is one of the triggered modes.
+	if ModeTriggered(d.config.Mode) {
+		err = d.WriteRegister(RegConfig, d.config.RegisterValue())
+	}
+	return
+}
+
+// Measurements reads the bus voltage, shunt voltage, current, and power
+// from the device.
+func (d *Device) Measurements() (
+	busVoltage int16,
+	shuntVoltage int16,
+	current float32,
+	power float32,
+	err error,
+) {
+	// Attempt to read bus voltage first, so we can check for overflow
+	// or conversion not ready.
+	if busVoltage, err = d.BusVoltage(); err != nil {
+		return
+	}
+
+	// Read the rest of the values, reading Power last, which resets
+	// the conversion ready bit (relevant for triggered modes).
+	if shuntVoltage, err = d.ShuntVoltage(); err != nil {
+		return
+	}
+
+	if current, err = d.Current(); err != nil {
+		return
+	}
+
+	if power, err = d.Power(); err != nil {
+		return
+	}
+
+	return
+}
+
+// BusVoltage reads the "bus" voltage in millivolts.
+//
+// It returns an error if the value is invalid due to overflow
+// or if the conversion is not ready yet. In a continuous mode
+// there should always be a measurement available after the
+// device is ready. See above notes on Trigger.
+func (d *Device) BusVoltage() (voltage int16, err error) {
+	val, err := d.ReadRegister(RegBusVoltage)
+	if err != nil {
+		return
+	}
+
+	// The overflow bit is set, so the values are invalid.
+	if val&(1<<0) != 0 {
+		err = ErrOverflow{}
+		return
+	}
+
+	// The conversion is not ready yet.
+	if ModeTriggered(d.config.Mode) && val&(1<<1) != 0 {
+		err = ErrNotReady{}
+		return
+	}
+
+	voltage = (int16(val) >> 3) * 4
+	return
+}
+
+// ShuntVoltage reads the "shunt" voltage in 100ths of a millivolt.
+func (d *Device) ShuntVoltage() (voltage int16, err error) {
+	return d.ReadRegister(RegShuntVoltage)
+}
+
+// Current reads the current in milliamps.
+func (d *Device) Current() (current float32, err error) {
+	val, err := d.ReadRegister(RegCurrent)
+	if err != nil {
+		return
+	}
+
+	current = float32(val) / d.config.CurrentDivider
+	return
+}
+
+// Power reads the power in milliwatts.
+func (d *Device) Power() (power float32, err error) {
+	val, err := d.ReadRegister(RegPower)
+	if err != nil {
+		return
+	}
+
+	power = float32(val) * d.config.PowerMultiplier
+	return
+}
+
+// Read the configuration from the device.
+func (d *Device) ReadConfig() (config Config, err error) {
+	var cfg, cal int16
+	if cfg, err = d.ReadRegister(RegConfig); err != nil {
+		return
+	}
+
+	if cal, err = d.ReadRegister(RegCalibration); err != nil {
+		return
+	}
+
+	config = NewConfig(cfg, cal)
+	return
+}
+
+// Read a register from the device.
+func (d *Device) ReadRegister(reg uint8) (val int16, err error) {
+	buf := make([]byte, 2)
+
+	err = legacy.ReadRegister(d.bus, uint8(d.Address), reg, buf)
+	if err != nil {
+		return
+	}
+
+	val = int16(buf[0])<<8 | int16(buf[1]&0xff)
+	return
+}
+
+// Write to a register on the device.
+func (d *Device) WriteRegister(reg uint8, val uint16) error {
+	buf := []byte{byte(val >> 8), byte(val & 0xff)}
+	return legacy.WriteRegister(d.bus, uint8(d.Address), reg, buf)
+}

ina219/ina219_test.go

@@ -0,0 +1,232 @@
+package ina219
+
+import (
+	"fmt"
+	"testing"
+
+	qt "github.com/frankban/quicktest"
+	"tinygo.org/x/drivers/tester"
+)
+
+func TestDefaultAddress(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	dev := New(bus)
+	c.Assert(dev.Address, qt.Equals, uint16(Address))
+}
+
+func TestBusVoltage(t *testing.T) {
+	t.Run("valid", func(t *testing.T) {
+		c := qt.New(t)
+		bus := tester.NewI2CBus(c)
+		fake := tester.NewI2CDevice16(c, Address)
+		fake.Registers = map[uint8]uint16{
+			RegBusVoltage: (4200 << 3) / 4, // 4.2V
+		}
+		bus.AddDevice(fake)
+
+		dev := New(bus)
+		voltage, err := dev.BusVoltage()
+		c.Assert(err, qt.IsNil)
+		c.Assert(voltage, qt.Equals, int16(4200))
+	})
+
+	t.Run("overflow", func(t *testing.T) {
+		c := qt.New(t)
+		bus := tester.NewI2CBus(c)
+		fake := tester.NewI2CDevice16(c, Address)
+		fake.Registers = map[uint8]uint16{
+			RegBusVoltage: (1 >> 0), // overflow
+		}
+		bus.AddDevice(fake)
+
+		dev := New(bus)
+		_, err := dev.BusVoltage()
+		c.Assert(err, qt.Not(qt.IsNil))
+		c.Assert(err, qt.ErrorMatches, ErrOverflow{}.Error())
+	})
+
+	t.Run("not ready", func(t *testing.T) {
+		c := qt.New(t)
+		bus := tester.NewI2CBus(c)
+		fake := tester.NewI2CDevice16(c, Address)
+		fake.Registers = map[uint8]uint16{
+			RegBusVoltage: ((4200 << 3) / 4) | (1 << 1), // not ready
+		}
+		bus.AddDevice(fake)
+
+		dev := New(bus)
+		dev.config.Mode = ModeTrigBus
+		_, err := dev.BusVoltage()
+		c.Assert(err, qt.Not(qt.IsNil))
+		c.Assert(err, qt.ErrorMatches, ErrNotReady{}.Error())
+	})
+}
+
+func TestShuntVoltage(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice16(c, Address)
+	fake.Registers = map[uint8]uint16{
+		RegShuntVoltage: 0x1234,
+	}
+	bus.AddDevice(fake)
+
+	dev := New(bus)
+	voltage, err := dev.ShuntVoltage()
+	c.Assert(err, qt.IsNil)
+	c.Assert(voltage, qt.Equals, int16(0x1234))
+}
+
+func TestCurrent(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice16(c, Address)
+	fake.Registers = map[uint8]uint16{
+		RegCurrent: 420 * 6.9, // 420mA
+	}
+	bus.AddDevice(fake)
+
+	dev := New(bus)
+	dev.config.CurrentDivider = 6.9
+	current, err := dev.Current()
+	c.Assert(err, qt.IsNil)
+	c.Assert(current, qt.Equals, float32(420))
+}
+
+func TestPower(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice16(c, Address)
+	fake.Registers = map[uint8]uint16{
+		RegPower: 420 / 0.8, // 420mW
+	}
+	bus.AddDevice(fake)
+
+	dev := New(bus)
+	dev.config.PowerMultiplier = 0.8
+	power, err := dev.Power()
+	c.Assert(err, qt.IsNil)
+	c.Assert(power, qt.Equals, float32(420))
+}
+
+func TestReadConfig(t *testing.T) {
+	// use the default configurations
+	for _, tc := range []Config{
+		Config16V400mA,
+		Config32V2A,
+		Config32V1A,
+	} {
+		n := fmt.Sprintf("%x/%x", tc.RegisterValue(), tc.Calibration.RegisterValue())
+		t.Run(n, func(t *testing.T) {
+			c := qt.New(t)
+			bus := tester.NewI2CBus(c)
+			fake := tester.NewI2CDevice16(c, Address)
+			fake.Registers = map[uint8]uint16{
+				RegConfig:      tc.RegisterValue(),
+				RegCalibration: tc.Calibration.RegisterValue(),
+			}
+			bus.AddDevice(fake)
+
+			dev := New(bus)
+			config, err := dev.ReadConfig()
+			c.Assert(err, qt.IsNil)
+			c.Assert(config.BusADC, qt.Equals, tc.BusADC)
+			c.Assert(config.BusVoltageRange, qt.Equals, tc.BusVoltageRange)
+			c.Assert(config.Calibration, qt.Equals, tc.Calibration)
+			c.Assert(config.Mode, qt.Equals, tc.Mode)
+			c.Assert(config.PGA, qt.Equals, tc.PGA)
+			c.Assert(config.ShuntADC, qt.Equals, tc.ShuntADC)
+		})
+	}
+}
+
+func TestWriteConfig(t *testing.T) {
+	// use the default configurations
+	for _, tc := range []Config{
+		Config16V400mA,
+		Config32V2A,
+		Config32V1A,
+	} {
+		n := fmt.Sprintf("%x/%x", tc.RegisterValue(), tc.Calibration.RegisterValue())
+		t.Run(n, func(t *testing.T) {
+			c := qt.New(t)
+			bus := tester.NewI2CBus(c)
+			fake := tester.NewI2CDevice16(c, Address)
+			bus.AddDevice(fake)
+			fake.Registers = map[uint8]uint16{
+				RegConfig:      0,
+				RegCalibration: 0,
+			}
+
+			dev := New(bus)
+			dev.config = tc
+			err := dev.Configure()
+			c.Assert(err, qt.IsNil)
+			c.Assert(fake.Registers[RegConfig], qt.Equals, tc.RegisterValue())
+			c.Assert(fake.Registers[RegCalibration], qt.Equals, tc.Calibration.RegisterValue())
+		})
+	}
+}
+
+func TestSetConfig(t *testing.T) {
+	for _, tc := range []Config{
+		Config16V400mA,
+		Config32V2A,
+		Config32V1A,
+	} {
+		n := fmt.Sprintf("%x/%x", tc.RegisterValue(), tc.Calibration.RegisterValue())
+		t.Run(n, func(t *testing.T) {
+			c := qt.New(t)
+			bus := tester.NewI2CBus(c)
+			dev := New(bus)
+			dev.SetConfig(tc)
+			c.Assert(dev.config, qt.Equals, tc)
+		})
+	}
+}
+
+func TestTrigger(t *testing.T) {
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice16(c, Address)
+	bus.AddDevice(fake)
+	fake.Registers = map[uint8]uint16{
+		RegConfig: Config32V2A.RegisterValue(),
+	}
+
+	dev := New(bus)
+	dev.config = Config32V2A
+	dev.config.Mode = ModeTrigBus
+	err := dev.Trigger()
+	c.Assert(err, qt.IsNil)
+	c.Assert(fake.Registers[RegConfig], qt.Equals, dev.config.RegisterValue())
+}
+
+func TestMeasurements(t *testing.T) {
+	bvVal := int16(4200)
+	svVal := int16(1234)
+	iVal := float32(420)
+	pVal := float32(420)
+
+	c := qt.New(t)
+	bus := tester.NewI2CBus(c)
+	fake := tester.NewI2CDevice16(c, Address)
+	bus.AddDevice(fake)
+	fake.Registers = map[uint8]uint16{
+		RegBusVoltage:   uint16(((4200 << 3) / 4) | (1 << 1)),
+		RegShuntVoltage: uint16(svVal),
+		RegCurrent:      uint16(iVal * Config16V400mA.CurrentDivider),
+		RegPower:        uint16(pVal / Config16V400mA.PowerMultiplier),
+	}
+
+	dev := New(bus)
+	dev.config = Config16V400mA
+	bv, sv, i, p, err := dev.Measurements()
+	c.Assert(err, qt.IsNil)
+	c.Assert(bv, qt.Equals, bvVal)
+	c.Assert(sv, qt.Equals, svVal)
+	c.Assert(i, qt.Equals, iVal)
+	c.Assert(p, qt.Equals, pVal)
+
+}

ina219/registers.go

@@ -0,0 +1,13 @@
+package ina219
+
+// The default I2C address for this device.
+const Address = 0x40
+
+const (
+	RegConfig       uint8 = 0x0
+	RegShuntVoltage uint8 = 0x1
+	RegBusVoltage   uint8 = 0x2
+	RegPower        uint8 = 0x3
+	RegCurrent      uint8 = 0x4
+	RegCalibration  uint8 = 0x5
+)

internal/legacy/pinhal.go

@@ -0,0 +1,54 @@
+package legacy
+
+import (
+	"errors"
+
+	"tinygo.org/x/drivers"
+)
+
+// ConfigurePinOut is a legacy function used to configure pins as outputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinOut(po drivers.PinOutput) {
+	configurePinOut(po)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInputPulldown(pi drivers.PinInput) {
+	configurePinInputPulldown(pi)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInput(pi drivers.PinInput) {
+	configurePinInput(pi)
+}
+
+// ConfigurePinInput is a legacy function used to configure pins as inputs.
+//
+// Deprecated: Do not configure pins in drivers.
+// This is a legacy feature and should only be used by drivers that
+// previously configured pins in initialization to avoid breaking users.
+func ConfigurePinInputPullup(pi drivers.PinInput) {
+	configurePinInputPullup(pi)
+}
+
+// PinIsNoPin returns true if the argument is a machine.Pin type and is the machine.NoPin predeclared type.
+//
+// Deprecated: Drivers do not require pin knowledge from now on.
+func PinIsNoPin(pin any) bool {
+	return pinIsNoPin(pin)
+}
+
+var (
+	ErrConfigBeforeInstantiated = errors.New("device must be instantiated with New before calling Configure method")
+)

internal/legacy/pinhal_go.go

@@ -0,0 +1,13 @@
+//go:build !baremetal
+
+package legacy
+
+import (
+	"tinygo.org/x/drivers"
+)
+
+func configurePinOut(p drivers.PinOutput)          {}
+func configurePinInput(p drivers.PinInput)         {}
+func configurePinInputPulldown(p drivers.PinInput) {}
+func configurePinInputPullup(p drivers.PinInput)   {}
+func pinIsNoPin(a any) bool                        { return false }

internal/legacy/pinhal_nopulls.go

@@ -0,0 +1,10 @@
+//go:build baremetal && fe310
+
+package legacy
+
+import "machine"
+
+const (
+	pulldown = machine.PinInput
+	pullup   = machine.PinInput
+)

internal/legacy/pinhal_pulls.go

@@ -0,0 +1,13 @@
+//go:build baremetal && !fe310
+
+package legacy
+
+import "machine"
+
+// If you are getting a build error here you then we missed adding
+// your CPU build tag to the list of CPUs that do not have pulldown/pullups.
+// Add it above and in pinhal_nopulls! You should also add a smoketest for it :)
+const (
+	pulldown = machine.PinInputPulldown
+	pullup   = machine.PinInputPullup
+)

internal/legacy/pinhal_tinygo.go

@@ -0,0 +1,37 @@
+//go:build baremetal
+
+package legacy
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers"
+)
+
+func configurePinOut(po drivers.PinOutput) {
+	configurePin(po, machine.PinOutput)
+}
+
+func configurePinInputPulldown(pi drivers.PinInput) {
+	configurePin(pi, pulldown) // some chips do not have pull down, in which case pulldown==machine.PinInput.
+}
+
+func configurePinInput(pi drivers.PinInput) {
+	configurePin(pi, machine.PinInput)
+}
+
+func configurePinInputPullup(pi drivers.PinInput) {
+	configurePin(pi, pullup) // some chips do not have pull up, in which case pullup==machine.PinInput.
+}
+
+func pinIsNoPin(a any) bool {
+	p, ok := a.(machine.Pin)
+	return ok && p == machine.NoPin
+}
+
+func configurePin(p any, mode machine.PinMode) {
+	machinePin, ok := p.(machine.Pin)
+	if ok {
+		machinePin.Configure(machine.PinConfig{Mode: mode})
+	}
+}