* Merge AVR support for Digispark and non-Digispark
* Fix the error "inline assembly requires more registers than available"
* Use a single file for all AVR targets, in a similar style as the
Xtensa support.
This patch adds support for the ESP8266 chip by adding support for 80MHz
operation. This should also work when the ESP32 is changed to 80MHz, but
I didn't test it (as there is not currently a way to do that).
Verified on a NodeMCU dev board with an ESP8266.
This allows WS2812 LEDs to be controlled by an ESP32. Right now it only
supports 160MHz operation, which is the default with current ESP32
support in TinyGo.
Named local labels shouldn't be used in LLVM because they might get
duplicated resulting in multiple symbol definitions and a compiler
error. Instead, use numeric labels.
This adjusts the timing for 120MHz as seen on atsamd51 boards. The
timing was kept as close as possible to the Cortex-M4 64MHz logic in
ws2812_m4_64m.go.
Tested: This works on ItsyBitsy-M4
This has cost me _hours_ to find. There are many clones of the ws2812
and they have slightly different timing characteristics. Some don't work
so well when you get close to the minimum T1H time: a 1-bit may be
interpreted as a 0-bit.
This commit adds support for the nrf52, which is a Cortex-M4 running at
64MHz.
While implementing this, I discovered that the timings for AVR/16MHz and
Cortex-M0 at 16MHz weren't quite right. They do work, but were slightly
out of spec. So I fixed this as well.
sago35
Ayke van Laethem
Alan Wang
Ron Evans
BCG
Jonathan Basseri
Brad Erickson