* Refactor GPIO configuration for PRALINE and non-PRALINE setups
- Updated PinMap structure to include gpio_mode for better flexibility.
- Added new GPIO mappings for SGPIO pins with appropriate configurations.
- Commented out unused GPIO definitions in hackrf_gpio.hpp to improve code clarity.
- Adjusted GPIO initialization for control pins to utilize the new PinMap structure.
- Ensured compatibility for both PRALINE and non-PRALINE configurations by using preprocessor directives.
* Refactor GPIO handling and remove LED abstraction
- Updated GPIO class to support logical polarity, enabling/disabling features based on their configured state.
- Replaced direct GPIO manipulation in power control functions with new GPIO methods for better readability and maintainability.
- Removed the LED class and its associated functionality, as it was deemed unnecessary for the current implementation.
- Adjusted GPIO initialization for various components, ensuring correct polarity settings for VAA and power enable pins.
- Cleaned up unused includes and commented-out code in hackrf_gpio.hpp.
* Refactor GPIO LED control methods to use setActive() and setInactive() for improved clarity
* Refactor GPIO control methods to use setActive() and setInactive() for improved clarity and consistency
* copilot
* Update GPIO control logic and pin definitions for clarity and consistency
* Refactor GPIO methods for improved naming consistency and clarity
* Implement antenna bias control for Praline and update GPIO configurations
* Add GPIO power management functions and update board initialization for Praline
* Refactor power management functions for Praline and update GPIO configurations
* Update GPIO configurations for Praline and enable power control pins. AA_EN enabled
* Refactor GPIO configuration for Praline: update array size definitions and clean up comments
* Add P1 and P2 control functions for PRALINE
* Introduced P1_Function and P2_Function enums in ClockManager to manage multiplexer control.
* mplemented set_p1_control and set_p2_control methods for configuring P1 and P2 control pins based on specified functions.
* Updated clock_manager.hpp and clock_manager.cpp to include new functionality.
* Modified MAX2837 and MAX2839 initialization to conditionally configure GPIO based on PRALINE.
* Adjusted RFFC507x and RFFC507x_SPI initialization to include GPIO setup for PRALINE.
- Refactored RF path initialization to remove unnecessary GPIO setup.
- Updated board configuration for PRALINE to reflect new GPIO settings and pin configurations.
- Cleaned up FPGA bridge code by removing unused pin configuration functions.
- Adjusted SCU array size in pal_lld.h for PRALINE.
- Enhanced hackrf_gpio.hpp to define multiplexer control pins for PRALINE.
- Modified LED setup to accommodate active-low configuration for PRALINE.
* Refactor GPIO and power control functions
- Removed unused power control function declarations from board.h.
- Enhanced gpio.hpp with new pin setup functions and GPIO control structures for PRALINE.
- Consolidated multiplexer control pin definitions into gpio_control namespace.
- Moved power control function implementations to gpio.cpp, including detailed VAA power management logic.
- Updated power control functions to handle both PRALINE and HackRF R9 configurations.
- Cleaned up hackrf_gpio.hpp by removing redundant multiplexer control definitions.
* Refactor GPIO control for PRALINE: update MAX2831 and RFFC507x configurations, add new GPIO mappings
* Refactor GPIO configurations for PRALINE: update anti-aliasing filter pin mapping, enhance LED setup logic, and add placeholder GPIO entries.
* Refactor GPIO configurations for PRALINE: update LED mappings and remove unused anti-aliasing filter GPIO entry.
* fix clock init and add mayhem tx capacity
* aligned external clock and RX config
* fix(clock): cap TX interpolation to x16 to prevent doubled waveform speed
The TX gateware only implements interpolation factors x1..x16 (tx_intrp
0..4), but the rate search could select n==5 (x32) for very low TX
sample rates. That left the AFE/CLK0/CLK1 running at the x32 rate while
the FPGA only interpolated by x16, clocking the TX datapath at twice the
gateware output rate. Cap afe_rate and _resampling_n to the x16 limit in
TX so the clocks stay aligned with the interpolation setting.
* fix(praline): source PLL1 from 40MHz GP_CLKIN instead of 12MHz XTAL
For the intermediate 90-110MHz PLL1 stepping stage, source PLL1 from
GP_CLKIN (Si5351 CLK2/MCU_CLK at 40MHz) giving N=2, M=10, Fclk=100MHz,
rather than the on-chip 12MHz XTAL bootstrap path. This matches the
non-PRALINE path. Remove the dead commented-out XTAL enable/PLL code.
* docs(fpga_bridge): correct register 0x03 description for PRALINE gateware
Register 0x03 is RX_DIGITAL_GAIN in RX and TX_NCO_CTRL in TX, not
RX_PSTEP.
* Fix fpga_tx_set_nco_enable to use FPGA_REG3_TX_NCO_CTRL (0x03)
* Cleaned up #ifndef PRALINE and updated logic to being with #ifdef PRALINE entries where possible to make logic flow for PRALINE code execution pipeline clearer. Cleaned up compiletime warnings for PRALINE related codebase updates.
* Addressed comments provided by copilot during PR review. Combed through frequency definitions for consistency between PLL A and PLL B register definitions for CLKs 0-7. Ensured CLK3/LK6 <- SMA PORTs and CLK7 <- not utiliized are disabled during core development phase to support root cause analysis of any spectral artifacts. Updated MCU frequency to 40MHz to ensure audio harmonics are outside FM radio band range (< 80 MHz, >120MHz) and added comments clarifying choice of 40 over 10 MHz for potential future root cause analysis in other bands where audio may be expected as needed. Added CLK6 and CLK7 to Clocks Status View Debug display. Moved CLK defintions and PLL instantiations for components that are most RF sensitive to PLL A. Left others in PLL B. That is move FPGA CLK1 to PLL B, while moving CLK2, CLK4, and CLK5 to PLL A.
* Cleaned up PLL A and B XTAL reference checks relative to 800 MHz.
* Encapsulated HackRF Pro Praline debug and status vies into a single Pro Debug submenu as part of clean up.
* Fixed BLE RX Out of Memory error. Updated LPC43xx ld scripts to accouint for additional HackRF Pro praline memory.
* Addressed copilot comments for ble_rx_app by adding recent_entries_view.set_dirty. Updated ble_rx_app for easier use with heap limit set to one less than recent entries max limit.
* Addressed copilot comments by updating comment clarity in source files. Updated ui_debug to allow for return reference if set for PRO debug menu item.
* Improved readability of intialization parameters for the FPGA registers, and addressed 20Mhz nulls by initializing DC Notch width with standard setting, and DC Adaptiation rate with a balanced setting.
* Ran format-code.sh
* Added option to allow for user to set number if entries in recent list. Default is set to a relatively stable 32.
* Removed #ifdef PRALINE pragmas from ble_rx_app such that HackRF One can also use the updated UI widget to allow for user to set number of entries in recent list.
* Ran format-code.sh
* Improved RSSI for praline. Values are now being counted correctly by statistics methods after selecting ADC = 0 0 for RSSI. This was different than for the hackrf one which uses ADC = 1.
* Implemented SW RSSI calculation since HW RSSI not currently available in hackrf pro (praline) via fpga pass through. Calibrated RSSI power sensistivity to mid level signal intensitities.
* In preparation for WIP allocated full 128k to M4 limiting heap for M0 to 0k, and leabing it only with 64k from bank 0. That is, bank1 and bank2 are fully allocated to M4. Cleaned up #ifdef PRALINE conditionals such taht max2837/39 are in #else conditionals, as well as continuing to clean up hackrf_r9 booleans by placing them within #else conditionals.
* fix typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Addressed co-pilot comments. Clarified use of 25 recent samples in ble app for stability, udpated comments to reflect use of avg power over pwak pwer detection, improved safety of sample packing while relying on intrinstics for execute the implementation in a single machine instruction (PKHBT) for computational and memory efficiency.
* Cleaned up #ifndef PRALINE and updated logic to being with #ifdef PRALINE entries where possible to make logic flow for PRALINE code execution pipeline clearer. Cleaned up compiletime warnings for PRALINE related codebase updates.
* Addressed comments provided by copilot during PR review. Combed through frequency definitions for consistency between PLL A and PLL B register definitions for CLKs 0-7. Ensured CLK3/LK6 <- SMA PORTs and CLK7 <- not utiliized are disabled during core development phase to support root cause analysis of any spectral artifacts. Updated MCU frequency to 40MHz to ensure audio harmonics are outside FM radio band range (< 80 MHz, >120MHz) and added comments clarifying choice of 40 over 10 MHz for potential future root cause analysis in other bands where audio may be expected as needed. Added CLK6 and CLK7 to Clocks Status View Debug display. Moved CLK defintions and PLL instantiations for components that are most RF sensitive to PLL A. Left others in PLL B. That is move FPGA CLK1 to PLL B, while moving CLK2, CLK4, and CLK5 to PLL A.
* Cleaned up PLL A and B XTAL reference checks relative to 800 MHz.
* Encapsulated HackRF Pro Praline debug and status vies into a single Pro Debug submenu as part of clean up.
* Fixed BLE RX Out of Memory error. Updated LPC43xx ld scripts to accouint for additional HackRF Pro praline memory.
* Addressed copilot comments for ble_rx_app by adding recent_entries_view.set_dirty. Updated ble_rx_app for easier use with heap limit set to one less than recent entries max limit.
* Addressed copilot comments by updating comment clarity in source files. Updated ui_debug to allow for return reference if set for PRO debug menu item.
* Improved readability of intialization parameters for the FPGA registers, and addressed 20Mhz nulls by initializing DC Notch width with standard setting, and DC Adaptiation rate with a balanced setting.
* Ran format-code.sh
* Added option to allow for user to set number if entries in recent list. Default is set to a relatively stable 32.
* Removed #ifdef PRALINE pragmas from ble_rx_app such that HackRF One can also use the updated UI widget to allow for user to set number of entries in recent list.
* Ran format-code.sh
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Fixed 0x03 mode for DC/Q-INV/Q-SHFT being set at every tuning and sample rate change. This was the root cause for loss of bluetooth before. Sample rate, and frequency can now be changed without need for manually resetting DC/Q-INV/Q-SHIFT settings. Updated method for setting frequncies in praline so that we have more testing options.
* Ran format-code.sh and cleaned up stale comments.
* Addressed comments, and removed commented line, opting for higher register values, 5E and 5D. Added WFM Debug View to support testing demodulation ringing.
* Addressed comments in PR conversation to clean comments and ensure consistency at initializtion accross updated methods and displays.
* Ran format-code.sh
* Set initial legacy state. Improved readability of clocking initialization settings. Updated set_sampling_frequency, and udpate_bandwidth to set decimation values in the fpga_registers to avoid aliasing in low band frequencies.
* Updated clock_manager to use correct clock and clock parameters for audio pll. Ran format-code.sh.
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Fixed 0x03 mode for DC/Q-INV/Q-SHFT being set at every tuning and sample rate change. This was the root cause for loss of bluetooth before. Sample rate, and frequency can now be changed without need for manually resetting DC/Q-INV/Q-SHIFT settings. Updated method for setting frequncies in praline so that we have more testing options.
* Ran format-code.sh and cleaned up stale comments.
* Addressed comments, and removed commented line, opting for higher register values, 5E and 5D. Added WFM Debug View to support testing demodulation ringing.
* Addressed comments in PR conversation to clean comments and ensure consistency at initializtion accross updated methods and displays.
* Ran format-code.sh
* Updated harckrf_gpio methods to more closely reflect hackrf_usb. Added some ui debug updates to RFFC5072 Status View.
* Updated tuning tables for tuning.cpp. Remnoved 15MHz lower limit in max2831.cpp since lower bandwidths don't seem to be causing lower band issues. Added more opportunities for clocks to stabalize at startup in board.cpp. Added/amended UI to help with addresssing low band tuning issues. Cleaned up stale comments in radio.cpp.
* Ran format-code.sh
* Updated to remove commented lines as part of clean up addressing review comments.
* Fixed clock_manager.cpp configruation for praline. Praline hackrf pro should have: CLK4: 6mA, Invert RFFC5072 40MHz ref and CLK5: 4mA, Invert MAX2831 40MHz ref. Improvements should be visible in the watefall at 2.4GHz, and between 2.311 and 2.599GHz.
* After reviewin clock config, updated values to reflect: CLK0 MAX5864 (ADC) 40 MHz 4mA Normal Integer Minimizes sampling jitter for SNR. CLK1 iCE40 FPGA 40 MHz 6mA Normal Integer Stable timing for the SPI bridge. CLK2 LPC43xx MCU 40 MHz 4mA Normal Integer Standard reference for MCU PLL. CLK3 SMA Port P1 10 MHz 8mA Normal Integer Cleanest square wave for Ext Ref. CLK4 RFFC5072 (Mixer) 40 MHz 6mA Inverted Integer Crucial for PLL Lock stability. CLK5 MAX2831 (TRX) 40 MHz 4mA Inverted Integer Reduces phase noise in the 2.4GHz LO. CLK6 SMA Port P2 10 MHz 8mA Normal Integer Sync output for external gear. CLK7 Reserved Off N/A N/A N/A Disabled to save power/reduce EMI.
* Ran format-code.sh
* Moved fpga_brdige_init to portapack.cpp. This more closely resembles how hackrf_usb starts initializes the fpga, and allows time for the clocks to stabilize and facilitate locking to support low band tuning.
* Ran format-code.sh
* Added ProRadio Debug display to check for / debug locking.
* Moved fpga_bridge_init before radio_init in portapack.cpp
* Low band can now see signals. Updated clock_manager, rffc507 and portapack.cpp to ensure fpga intialized correctly. Ensures rffc507x.cpp has correct 40MHz reference frequency, prescaler, and synth configuration.
* Updated radio to add q-invert on, dc-block on, and deimation=3 (8x, for 20 -> 2.5 MHz decimation for testing cleaner low band signals.
* Ran format-code.sh
* Updated harckrf_gpio methods to more closely reflect hackrf_usb. Added some ui debug updates to RFFC5072 Status View.
* Updated tuning tables for tuning.cpp. Remnoved 15MHz lower limit in max2831.cpp since lower bandwidths don't seem to be causing lower band issues. Added more opportunities for clocks to stabalize at startup in board.cpp. Added/amended UI to help with addresssing low band tuning issues. Cleaned up stale comments in radio.cpp.
* Ran format-code.sh
* Updated to remove commented lines as part of clean up addressing review comments.
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Fix ui addition of max2831 debug display.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
* Added UI debug display for max2831 like the rffc507x. Added Filter Band display and Mixer status to Signal Path Status debug display.
* Added ability to set Q: INV, or Q:NOR in Signal Path Status Debug view for testing. Also added display entries for the FGPA Ctrl register fir debugging.
* Added System Diagnostics which allows testing sample rate, q-inv, and dc blk
* Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected.
* Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected.
* Added consistency for testing.
* Added ui to debug whether rffc5072 is locking correctly. Also addressed rf_amp fixed in on state, such that it may now be able to be toggled in HackRF Pro praline setups.
* Updated format to support automated tests.
* format code
* Updated rffc5072 status view in ui_debug to help with debugging. Made updated recommendtions for merge from PR comments. Made updates to ensure resetx isn't reconfigured for output in rffc507x.cpp.
* Ran ./format-code.sh
* Added reference comment that addresses debugging in PRALINE to detail that when the capture app was requesting 15 MHz, it matched 15100000 which resulted in the 8.5M setting. To get the actual 15M setting (22.6 MHz bandwidth), I had to force a request at least 22 MHz while debugging.
* Debugging tunning ENX and frequency locking in low band.
* Addressed pin differences between HackRF One and HackRF Pro (praline), resolved ENX configuration.
* Cirrected pins, and debugging tuning for low band. High band now goes past 2.7GHz into 3.3 GHz.
* Updated ui_debug to track ENX updates and support tracing which calls may be changing ENX.
* Removed clkin reference in ui_debug.cpp to allow space for more information about CLK0, CLK1, CLK4, and CLK5.
* Removed clkin reference in ui_debug.cpp to allow space for more information about CLK0, CLK1, CLK4, and CLK5.
* Ran format-code.sh
* Updated rffc507xx.cpp, and ensured hackrf submodule at f1dcd554.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* update submodule
* remove pragma, remove unused variable
* fix bad external decl, signed vs unsigned comparison
* fix unused: display computed flags
* fix max2881 info mess
* code format
* fix gui positions
* use constexpr for min and max lo_frequencies
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Fix ui addition of max2831 debug display.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
* Added UI debug display for max2831 like the rffc507x. Added Filter Band display and Mixer status to Signal Path Status debug display.
* Added ability to set Q: INV, or Q:NOR in Signal Path Status Debug view for testing. Also added display entries for the FGPA Ctrl register fir debugging.
* Added System Diagnostics which allows testing sample rate, q-inv, and dc blk
* Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected.
* Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected.
* Added consistency for testing.
* Added ui to debug whether rffc5072 is locking correctly. Also addressed rf_amp fixed in on state, such that it may now be able to be toggled in HackRF Pro praline setups.
* Updated format to support automated tests.
* format code
* Updated rffc5072 status view in ui_debug to help with debugging. Made updated recommendtions for merge from PR comments. Made updates to ensure resetx isn't reconfigured for output in rffc507x.cpp.
* Ran ./format-code.sh
* Added reference comment that addresses debugging in PRALINE to detail that when the capture app was requesting 15 MHz, it matched 15100000 which resulted in the 8.5M setting. To get the actual 15M setting (22.6 MHz bandwidth), I had to force a request at least 22 MHz while debugging.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* Add enabled checks in ReceiverModel and TransmitterModel
* Move TX limit logic to TransmitterModel from radio API
* Add TX disable functionality and UI
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Clang
* Clang
* Tweak position of field on screen
* Reverted text on Write button per reviewer feedback
* Activating TX Low Pass Filter in Second IF IC
* solving PR conversation revisions
* Final TX LPF decision for ADSB_TX
* Small comments correction.
* Added set TX LPF also in APRS, BurgerPgr,Jammer
* Attempt to fix Capture startup hang
* Pump baseband_queue on M4 startup
* Synchronization experiment
* Moved SpectrumCapture member, better hang detection for M0
* Prevent execute from working on members until class has been initialized.
* Formatting
* Remove workaround.
* Rebase on next
* Set rf direction in RadioState
* centralize cpld load for TX->RX
* Remove calls to load_sram from all apps
* re-add CPLD hack, don't set radio values directly.
---------
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Use receiver/transmitter models everywhere
* Run formatter
* Fix a copy-paste bug, make transmitter_model actually set tx_gain.
---------
Co-authored-by: kallanreed <kallanreed@outlook.com>
* Added HamItUp option to allow quick offset of the tuned frequency
* New HamItUp icon for top bar
* HamItUp checkbox status and frequency persistent settings in Settings/Radio
Pezsma
gullradriel
未来方舟
stafur
Harin Lee
Brumi-2021
Mark Thompson
Bernd Herzog
Kyle Reed
Kyle Reed
jLynx
GullCode
phil-stumpy
teixeluis
furrtek
furrtek
Jared Boone