mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2026-08-15 20:33:42 +00:00
8a16ec829cb7dc36ff20beea8a50e86d259a4456
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Pezsma
|
cafe62564e |
Gpio modify (#3229)
* Refactor GPIO configuration for PRALINE and non-PRALINE setups - Updated PinMap structure to include gpio_mode for better flexibility. - Added new GPIO mappings for SGPIO pins with appropriate configurations. - Commented out unused GPIO definitions in hackrf_gpio.hpp to improve code clarity. - Adjusted GPIO initialization for control pins to utilize the new PinMap structure. - Ensured compatibility for both PRALINE and non-PRALINE configurations by using preprocessor directives. * Refactor GPIO handling and remove LED abstraction - Updated GPIO class to support logical polarity, enabling/disabling features based on their configured state. - Replaced direct GPIO manipulation in power control functions with new GPIO methods for better readability and maintainability. - Removed the LED class and its associated functionality, as it was deemed unnecessary for the current implementation. - Adjusted GPIO initialization for various components, ensuring correct polarity settings for VAA and power enable pins. - Cleaned up unused includes and commented-out code in hackrf_gpio.hpp. * Refactor GPIO LED control methods to use setActive() and setInactive() for improved clarity * Refactor GPIO control methods to use setActive() and setInactive() for improved clarity and consistency * copilot * Update GPIO control logic and pin definitions for clarity and consistency * Refactor GPIO methods for improved naming consistency and clarity |
||
|
Pezsma
|
9ab367f2e0 |
Add praline gpio (#3218)
* Implement antenna bias control for Praline and update GPIO configurations * Add GPIO power management functions and update board initialization for Praline * Refactor power management functions for Praline and update GPIO configurations * Update GPIO configurations for Praline and enable power control pins. AA_EN enabled * Refactor GPIO configuration for Praline: update array size definitions and clean up comments * Add P1 and P2 control functions for PRALINE * Introduced P1_Function and P2_Function enums in ClockManager to manage multiplexer control. * mplemented set_p1_control and set_p2_control methods for configuring P1 and P2 control pins based on specified functions. * Updated clock_manager.hpp and clock_manager.cpp to include new functionality. * Modified MAX2837 and MAX2839 initialization to conditionally configure GPIO based on PRALINE. * Adjusted RFFC507x and RFFC507x_SPI initialization to include GPIO setup for PRALINE. - Refactored RF path initialization to remove unnecessary GPIO setup. - Updated board configuration for PRALINE to reflect new GPIO settings and pin configurations. - Cleaned up FPGA bridge code by removing unused pin configuration functions. - Adjusted SCU array size in pal_lld.h for PRALINE. - Enhanced hackrf_gpio.hpp to define multiplexer control pins for PRALINE. - Modified LED setup to accommodate active-low configuration for PRALINE. * Refactor GPIO and power control functions - Removed unused power control function declarations from board.h. - Enhanced gpio.hpp with new pin setup functions and GPIO control structures for PRALINE. - Consolidated multiplexer control pin definitions into gpio_control namespace. - Moved power control function implementations to gpio.cpp, including detailed VAA power management logic. - Updated power control functions to handle both PRALINE and HackRF R9 configurations. - Cleaned up hackrf_gpio.hpp by removing redundant multiplexer control definitions. * Refactor GPIO control for PRALINE: update MAX2831 and RFFC507x configurations, add new GPIO mappings * Refactor GPIO configurations for PRALINE: update anti-aliasing filter pin mapping, enhance LED setup logic, and add placeholder GPIO entries. * Refactor GPIO configurations for PRALINE: update LED mappings and remove unused anti-aliasing filter GPIO entry. |
||
 gullradriel
|
ef2ae9874b |
fix build (#3129)
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com> |
||
|
Pezsma
|
5deeaed5f0 | Praline rssi (#3127) | ||
 stafur
|
85eaa9d800 |
Updated praline low and high band tuning (#3030)
* Updated harckrf_gpio methods to more closely reflect hackrf_usb. Added some ui debug updates to RFFC5072 Status View. * Updated tuning tables for tuning.cpp. Remnoved 15MHz lower limit in max2831.cpp since lower bandwidths don't seem to be causing lower band issues. Added more opportunities for clocks to stabalize at startup in board.cpp. Added/amended UI to help with addresssing low band tuning issues. Cleaned up stale comments in radio.cpp. * Ran format-code.sh * Updated to remove commented lines as part of clean up addressing review comments. |
||
|
gullradriel
|
705e4f125f |
Update submodule, fix warnings for PRALINE (#3012)
* update submodule * remove pragma, remove unused variable * fix bad external decl, signed vs unsigned comparison * fix unused: display computed flags * fix max2881 info mess * code format * fix gui positions * use constexpr for min and max lo_frequencies |
||
|
stafur
|
c31a978e6f |
Next pralinetcv9.2.1 archport (#2991)
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt. * Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits. * Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000. * Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo. * Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo. * Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo. * Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test. * Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected. * Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana. * Ran format-code.sh to allow for consistency with autoamted clang checks. * Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf * Addressed format edits necessary to pass clang-format check. * Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass. * Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init. * Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture. * After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts. * Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit). * Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning. * update submodule * format code * Small touch up merging latest next and ensuring build for HackRF One. * Fix ui addition of max2831 debug display. * Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule. * Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board. * Added UI debug display for max2831 like the rffc507x. Added Filter Band display and Mixer status to Signal Path Status debug display. * Added ability to set Q: INV, or Q:NOR in Signal Path Status Debug view for testing. Also added display entries for the FGPA Ctrl register fir debugging. * Added System Diagnostics which allows testing sample rate, q-inv, and dc blk * Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected. * Corrected LP - GPIO4[8], and GPIO4[9] issue which was preventing RF Amp, and LPF from chaning state. HackRF Pro (praline) now correctly changes state of LPF and RF Amp as expected. * Added consistency for testing. * Added ui to debug whether rffc5072 is locking correctly. Also addressed rf_amp fixed in on state, such that it may now be able to be toggled in HackRF Pro praline setups. * Updated format to support automated tests. * format code * Updated rffc5072 status view in ui_debug to help with debugging. Made updated recommendtions for merge from PR comments. Made updates to ensure resetx isn't reconfigured for output in rffc507x.cpp. * Ran ./format-code.sh * Added reference comment that addresses debugging in PRALINE to detail that when the capture app was requesting 15 MHz, it matched 15100000 which resulted in the 8.5M setting. To get the actual 15M setting (22.6 MHz bandwidth), I had to force a request at least 22 MHz while debugging. --------- Co-authored-by: gullradriel <gullradriel@users.noreply.github.com> |
||
|
stafur
|
39424632bb |
HackRF Pro (praline) arch-port initial PR (#2958)
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt. * Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits. * Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000. * Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo. * Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo. * Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo. * Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test. * Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected. * Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana. * Ran format-code.sh to allow for consistency with autoamted clang checks. * Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf * Addressed format edits necessary to pass clang-format check. * Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass. * Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init. * Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture. * After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts. * Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit). * Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning. * update submodule * format code * Small touch up merging latest next and ensuring build for HackRF One. * Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule. * Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board. --------- Co-authored-by: gullradriel <gullradriel@users.noreply.github.com> |