Compare commits

...

32 Commits

Author SHA1 Message Date
Ayke van Laethem 91b0bbaae6 testing: switch to upstream version 2025-10-05 15:33:49 +02:00
张之阳 aedaf7d925 machine: fix deprecated AsmFull comment (#5005) 2025-10-04 11:19:01 +02:00
Ayke van Laethem 256e84f912 all: shrink bdwgc library
By disabling some configuration options (and updating the library), the
library becomes a lot smaller. With `-no-debug`, binaries become ~18kB
smaller on Linux, ~4kB smaller on MacOS, ~9kB smaller on Windows, and
~12kB smaller on WebAssembly.
2025-10-03 15:46:25 +02:00
Ayke van Laethem 0a87846bd8 cortexm: optimize code size for the HardFault_Handler
This function is called when a hard fault occurs. Hard faults happen
when something really bad happens - like writing to unwritable memory or
an unaligned memory access on Cortex-M0. It is not generally possible to
recover from these.

This commit optimizes the code size overhead of hard fault handling:

  * It removes the stack overflow checking code.
    This may seem like a bad thing, but the only thing this could check
    were stack overflows outside goroutines. In practice, this could
    only really happen on a stack overflow in the scheduler (unlikely),
    or in interrupt code (possible, but interrupts are small so still
    unlikely). Most stack overflows happen in regular goroutines, and
    weren't caught in the HardFault.
  * It makes the panic message similar to a regular panic. This has two
    advantages:
      * It reduces code size, because the string can be reused between
        the HardFault handler and the runtime panic function.
      * Using the same pattern automatically makes `-monitor` print the
        source address for the hard fault. Not a big benefit as we could
        trivially add any other pattern but a nice benefit nonetheless.

Result:

    $ tinygo flash -target=microbit -size=short -programmer=openocd -monitor examples/serial
       code    data     bss |   flash     ram
       3036       8    2256 |    3044    2264
    [...snip]
    Connected to /dev/ttyACM0. Press Ctrl-C to exit.
    panic: runtime error at 0x00000344: HardFault with sp=0x200007d0
    [tinygo: panic at /home/ayke/src/tinygo/tinygo/src/internal/task/task_stack_cortexm.go:48:4]

(This is with https://github.com/tinygo-org/tinygo/pull/3680 not yet
fixed and some local changes to configure the UART so I can actually see
the panic).

For atsamd21/nrf51 chips this results in a binary size reduction of
around 100 bytes. For other Cortex-M chips it's around 24 bytes but I
hope to change this in the future because a lot of the fault decoding in
runtime_cortexm_hardfault_debug.go should IMHO be done by the TinyGo
monitor instead (I estimate that this would save around 800 bytes on
these chips).
2025-10-03 13:20:18 +02:00
Ayke van Laethem 073862ee92 fe310: add I2C pins for the HiFive1b 2025-10-02 20:26:25 +02:00
Ayke van Laethem c820d83ae2 interp: better errors when debugging interp
When debugging is enabled for interp, print better errors in a specific
case.

Before:

    !! revert because of error: interp: unsupported instruction (to be emitted at runtime)

After:

    !! revert because of error: /usr/local/go1.24.0/src/regexp/syntax/parse.go:927:27: interp: unsupported instruction (to be emitted at runtime)

So this adds error location information, which can be quite useful.
2025-10-02 05:42:08 +02:00
Daniel Esteban 109e0767e7 Added Gopher ARCADE board 2025-09-20 08:35:34 +02:00
Ben Krieger 821f2aeae0 Fix linker errors for runtime.vgetrandom and crypto/internal/sysrand.fatal 2025-09-19 15:32:01 +02:00
Piotr Bocheński 93a11e266f net: update submodule to latest commits
Signed-off-by: Piotr Bocheński <piotr@bochen.ski>
2025-09-19 13:14:12 +02:00
rdon e29e583919 fix: use int64 in ReadTemperature to avoid overflow 2025-09-19 11:30:50 +02:00
Michael Smith 310df7acb5 fix(rp2): reset spinlocks at startup 2025-09-19 02:22:36 -04:00
Michael Smith b9387febe0 fix(rp2): use side-effect-free spinlocks 2025-09-19 02:22:36 -04:00
Michael Smith 3dce224183 fix(rp2): switch spinlock busy loop to wfe 2025-09-19 02:22:36 -04:00
Michael Smith 5d8afa25b8 fix(rp2): disable DBGPAUSE on startup 2025-09-19 02:22:36 -04:00
deadprogram 0dca016749 fix: remove macOS 15 from CI build matrix. It was already being tested by
the test-macos-homebrew job, and it conflicts with the actual build
that we want, which is macOS 14 for backwards-compatibility.

Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-19 01:01:58 -04:00
deadprogram 28a911bcce fix: point the submodule for musl-lib to a mirror in the TinyGo
GitHub org. The git server for git.musl-libc.org is having troubles,
and it also seems like a safer bet to have our own mirror just in case.

Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-19 01:01:58 -04:00
deadprogram eb36120c6e ci: several improvements to the macOS GH actions build including:
- do not install cmake, instead use the version already installed
- add macOS 15 to the CI builds
- update a could of GH actions to latest release
- update Go version being use to Go 1.25.1

Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-18 08:24:29 -04:00
Ayke van Laethem dfbb133ea6 all: add full LLVM 20 support
This switches the Espressif fork from LLVM 19 to LLVM 20, so we can use
the improvements made between those LLVM versions. It also better aligns
with the system-LLVM build method, which currently also defaults to LLVM
20.

Note that this disables the machine outliner for RISC-V. It appears
there's a bug in there somewhere, with the machine outliner enabled the
crypto/elliptic package tests fail with -target=riscv-qemu.
This should ideally be investigated and reported upstream.
2025-09-17 05:28:06 -04:00
deadprogram 79ab77facd fix: correct linter issues exposed by the fix in #4679
Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-14 08:03:25 -04:00
Matt Mets 2c99692019 Move the directory list into a variable 2025-09-14 08:03:25 -04:00
Matt Mets 0ca0aad7ce Fix for #4678: top-level 'make lint' wasn't working
The revive command seems to have had a syntax error in the file
input glob. It appears to have been broken in a way that did not
result in a return code being set. This change uses 'find' to
build the input to the linter.

Note that it is expected to fail the CI script, because it is
uncovering some existing lint issues that were not being caught.
2025-09-14 08:03:25 -04:00
Michael Smith 3ddba4e620 fix: add TryLock to sync.RWMutex 2025-09-13 11:04:07 -04:00
luoliwoshang eab3dceb48 fix/typo:makeESPFirmwareImage 2025-09-12 14:04:22 -04:00
Michael Smith 663a94fcab feat: enable //go:linkname pragma for globals 2025-09-12 12:53:34 -04:00
Michael Smith 373ca88f14 fix: expand RTT debugger compatibility 2025-09-12 12:53:34 -04:00
Ayke van Laethem be33de1086 GNUmakefile: shrink TinyGo binaries on Linux
With these flags, the TinyGo binary gets 18.8MB (11.6%) smaller. That
seems like a quite useful win for such a small change!

This is only for Linux for now. MacOS and Windows can be tested later,
the flags for those probably need to be modified.

Originally inspired by:
https://discourse.llvm.org/t/state-of-the-art-for-reducing-executable-size-with-heavily-optimized-program/87952/18
There are some other flags like -Wl,--pack-dyn-relocs=relr that did not
shrink binary size in my testing, so I've left them out.

This also switches the linker to prefer mold or lld over the default
linker, since the system linker is usually ld.bfd which is very slow.
(Also, for some reason mold produces smaller binaries than lld).
2025-09-12 05:29:08 -04:00
deadprogram e5bdfb0962 fix: increase the timeout for chromedp to connect to the headless browser used for running
the wasm tests.

Also add favicon link to avoid extra fetches during test runs.

Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-11 08:34:38 -04:00
deadprogram e80c6c48a1 chore: create separate go.mod file for testing dependencies for wasm tests
that use Chromium headless browser to avoid use of older incompatible version.

Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-09-11 08:34:38 -04:00
Thomas Kohler 381644a0c0 machine,nrf528: stop the bus only once on I2C bus error and ensures the first error is returned
In some cases, e.g nothing connected on the bus, repeated resume-stop sequences can lead to the bus never reaching the stop state, hanging Tx.
This change ensures the resume-stop sequence is submitted once on error. It also moves the error code read to before the sequence to ensure it's valid.

Fixes: #4998
2025-09-09 12:49:29 -04:00
luoliwoshang 13bb59c334 ci:uninstall cmake before install 2025-09-09 06:39:26 -04:00
Ayke van Laethem 632e5f9872 rp2040: allow writing to the UART inside interrupts
Writing to the UART takes time and that may not be a good idea inside an
interrupt, but it is essential for debugging sometimes (especially since
USB-CDC typically doesn't work inside an interrupt).

This fixes UART support in interrupts for the RP2040 at least. You can
test it with `-serial=uart` and connecting a USB-UART adapter to the
right pins.
2025-09-03 10:50:10 -04:00
sago35 37531930b8 chore: update version for 0.40 development cycle 2025-09-02 07:14:45 -04:00
95 changed files with 563 additions and 2625 deletions
+9 -9
View File
@@ -30,22 +30,22 @@ jobs:
run: |
HOMEBREW_NO_AUTO_UPDATE=1 brew install qemu binaryen
- name: Checkout
uses: actions/checkout@v4
uses: actions/checkout@v5
with:
submodules: true
- name: Extract TinyGo version
id: version
run: ./.github/workflows/tinygo-extract-version.sh | tee -a "$GITHUB_OUTPUT"
- name: Install Go
uses: actions/setup-go@v5
uses: actions/setup-go@v6
with:
go-version: '1.25.0'
go-version: '1.25.1'
cache: true
- name: Restore LLVM source cache
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-${{ matrix.os }}-v1
key: llvm-source-20-${{ matrix.os }}-v1
path: |
llvm-project/clang/lib/Headers
llvm-project/clang/include
@@ -70,7 +70,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-build
with:
key: llvm-build-19-${{ matrix.os }}-v1
key: llvm-build-20-${{ matrix.os }}-v2
path: llvm-build
- name: Build LLVM
if: steps.cache-llvm-build.outputs.cache-hit != 'true'
@@ -79,7 +79,7 @@ jobs:
rm -rf llvm-project
make llvm-source
# install dependencies
HOMEBREW_NO_AUTO_UPDATE=1 brew install cmake ninja
HOMEBREW_NO_AUTO_UPDATE=1 brew install ninja
# build!
make llvm-build
find llvm-build -name CMakeFiles -prune -exec rm -r '{}' \;
@@ -130,11 +130,11 @@ jobs:
run: |
brew install llvm@${{ matrix.version }}
- name: Checkout
uses: actions/checkout@v4
uses: actions/checkout@v5
- name: Install Go
uses: actions/setup-go@v5
uses: actions/setup-go@v6
with:
go-version: '1.25.0'
go-version: '1.25.1'
cache: true
- name: Build TinyGo (LLVM ${{ matrix.version }})
run: go install -tags=llvm${{ matrix.version }}
+7 -7
View File
@@ -26,7 +26,7 @@ jobs:
# tar: needed for actions/cache@v4
# git+openssh: needed for checkout (I think?)
# ruby: needed to install fpm
run: apk add tar git openssh make g++ ruby-dev
run: apk add tar git openssh make g++ ruby-dev mold
- name: Work around CVE-2022-24765
# We're not on a multi-user machine, so this is safe.
run: git config --global --add safe.directory "$GITHUB_WORKSPACE"
@@ -48,7 +48,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-linux-alpine-v1
key: llvm-source-20-linux-alpine-v1
path: |
llvm-project/clang/lib/Headers
llvm-project/clang/include
@@ -73,7 +73,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-build
with:
key: llvm-build-19-linux-alpine-v1
key: llvm-build-20-linux-alpine-v1
path: llvm-build
- name: Build LLVM
if: steps.cache-llvm-build.outputs.cache-hit != 'true'
@@ -197,7 +197,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-linux-asserts-v1
key: llvm-source-20-linux-asserts-v1
path: |
llvm-project/clang/lib/Headers
llvm-project/clang/include
@@ -222,7 +222,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-build
with:
key: llvm-build-19-linux-asserts-v1
key: llvm-build-20-linux-asserts-v1
path: llvm-build
- name: Build LLVM
if: steps.cache-llvm-build.outputs.cache-hit != 'true'
@@ -304,7 +304,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-linux-v1
key: llvm-source-20-linux-v1
path: |
llvm-project/clang/lib/Headers
llvm-project/clang/include
@@ -329,7 +329,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-build
with:
key: llvm-build-19-linux-${{ matrix.goarch }}-v3
key: llvm-build-20-linux-${{ matrix.goarch }}-v1
path: llvm-build
- name: Build LLVM
if: steps.cache-llvm-build.outputs.cache-hit != 'true'
+2 -2
View File
@@ -35,8 +35,8 @@ jobs:
uses: docker/metadata-action@v5
with:
images: |
tinygo/llvm-19
ghcr.io/${{ github.repository_owner }}/llvm-19
tinygo/llvm-20
ghcr.io/${{ github.repository_owner }}/llvm-20
tags: |
type=sha,format=long
type=raw,value=latest
+1 -1
View File
@@ -29,7 +29,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-linux-nix-v1
key: llvm-source-20-linux-nix-v1
path: |
llvm-project/compiler-rt
- name: Download LLVM source
+1 -1
View File
@@ -30,7 +30,7 @@ jobs:
uses: actions/cache@v4
id: cache-llvm-source
with:
key: llvm-source-19-sizediff-v1
key: llvm-source-20-sizediff-v1
path: |
llvm-project/compiler-rt
- name: Download LLVM source
+2 -2
View File
@@ -47,7 +47,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-source
with:
key: llvm-source-19-windows-v1
key: llvm-source-20-windows-v1
path: |
llvm-project/clang/lib/Headers
llvm-project/clang/include
@@ -72,7 +72,7 @@ jobs:
uses: actions/cache/restore@v4
id: cache-llvm-build
with:
key: llvm-build-19-windows-v1
key: llvm-build-20-windows-v2
path: llvm-build
- name: Build LLVM
if: steps.cache-llvm-build.outputs.cache-hit != 'true'
+1 -1
View File
@@ -22,7 +22,7 @@
url = https://github.com/tinygo-org/stm32-svd
[submodule "lib/musl"]
path = lib/musl
url = git://git.musl-libc.org/musl
url = https://github.com/tinygo-org/musl-libc.git
[submodule "lib/binaryen"]
path = lib/binaryen
url = https://github.com/WebAssembly/binaryen.git
+30 -5
View File
@@ -79,6 +79,26 @@ ifeq (1, $(STATIC))
BINARYEN_OPTION += -DCMAKE_CXX_FLAGS="-static" -DCMAKE_C_FLAGS="-static"
endif
# Optimize the binary size for Linux.
# These flags may work on other platforms, but have only been tested on Linux.
ifeq ($(uname),Linux)
HAS_MOLD := $(shell command -v ld.mold 2> /dev/null)
HAS_LLD := $(shell command -v ld.lld 2> /dev/null)
LLVM_CFLAGS := -ffunction-sections -fdata-sections -fvisibility=hidden
LLVM_LDFLAGS := -Wl,--gc-sections
ifneq ($(HAS_MOLD),)
# Mold might be slightly faster.
LLVM_LDFLAGS += -fuse-ld=mold -Wl,--icf=all
else ifneq ($(HAS_LLD),)
# LLD is more commonly available.
LLVM_LDFLAGS += -fuse-ld=lld -Wl,--icf=all
endif
LLVM_OPTION += \
-DCMAKE_C_FLAGS="$(LLVM_CFLAGS)" \
-DCMAKE_CXX_FLAGS="$(LLVM_CFLAGS)"
CGO_LDFLAGS += $(LLVM_LDFLAGS)
endif
# Cross compiling support.
ifneq ($(CROSS),)
CC = $(CROSS)-gcc
@@ -243,7 +263,7 @@ gen-device-renesas: build/gen-device-svd
GO111MODULE=off $(GO) fmt ./src/device/renesas
$(LLVM_PROJECTDIR)/llvm:
git clone -b xtensa_release_19.1.2 --depth=1 https://github.com/espressif/llvm-project $(LLVM_PROJECTDIR)
git clone -b tinygo_20.x --depth=1 https://github.com/tinygo-org/llvm-project $(LLVM_PROJECTDIR)
llvm-source: $(LLVM_PROJECTDIR)/llvm ## Get LLVM sources
# Configure LLVM.
@@ -343,7 +363,6 @@ TEST_PACKAGES_FAST = \
path \
reflect \
sync \
testing \
testing/iotest \
text/scanner \
unicode \
@@ -460,7 +479,7 @@ TEST_PACKAGES_HOST := $(TEST_PACKAGES_FAST) $(TEST_PACKAGES_WINDOWS)
TEST_IOFS := false
endif
TEST_SKIP_FLAG := -skip='TestExtraMethods|TestParseAndBytesRoundTrip/P256/Generic'
TEST_SKIP_FLAG := -skip='TestExtraMethods|TestParseAndBytesRoundTrip/P256/Generic|^Fuzz'
# Test known-working standard library packages.
# TODO: parallelize, and only show failing tests (no implied -v flag).
@@ -775,6 +794,8 @@ endif
@$(MD5SUM) test.hex
$(TINYGO) build -size short -o test.hex -target=gopher-badge examples/blinky1
@$(MD5SUM) test.hex
$(TINYGO) build -size short -o test.hex -target=gopher-arcade examples/blinky1
@$(MD5SUM) test.hex
$(TINYGO) build -size short -o test.hex -target=ae-rp2040 examples/echo
@$(MD5SUM) test.hex
$(TINYGO) build -size short -o test.hex -target=thumby examples/echo
@@ -951,7 +972,7 @@ endif
wasmtest:
$(GO) test ./tests/wasm
cd ./tests/wasm && $(GO) test .
build/release: tinygo gen-device $(if $(filter 1,$(USE_SYSTEM_BINARYEN)),,binaryen)
@mkdir -p build/release/tinygo/bin
@@ -1098,6 +1119,7 @@ endif
tools:
cd internal/tools && go generate -tags tools ./
LINTDIRS=src/os/ src/reflect/
.PHONY: lint
lint: tools ## Lint source tree
revive -version
@@ -1105,7 +1127,10 @@ lint: tools ## Lint source tree
# revive.toml isn't flexible enough to filter out just one kind of error from a checker, so do it with grep here.
# Can't use grep with friendly formatter. Plain output isn't too bad, though.
# Use 'grep .' to get rid of stray blank line
revive -config revive.toml compiler/... src/{os,reflect}/*.go | grep -v "should have comment or be unexported" | grep '.' | awk '{print}; END {exit NR>0}'
revive -config revive.toml compiler/... $$( find $(LINTDIRS) -type f -name '*.go' ) \
| grep -v "should have comment or be unexported" \
| grep '.' \
| awk '{print}; END {exit NR>0}'
SPELLDIRSCMD=find . -depth 1 -type d | egrep -wv '.git|lib|llvm|src'; find src -depth 1 | egrep -wv 'device|internal|net|vendor'; find src/internal -depth 1 -type d | egrep -wv src/internal/wasi
.PHONY: spell
+6 -3
View File
@@ -30,7 +30,10 @@ var BoehmGC = Library{
// Use a minimal environment.
"-DNO_MSGBOX_ON_ERROR", // don't call MessageBoxA on Windows
"-DDONT_USE_ATEXIT",
"-DNO_GETENV",
"-DNO_GETENV", // smaller binary, more predictable configuration
"-DNO_CLOCK", // don't use system clock
"-DNO_DEBUGGING", // reduce code size
"-DGC_NO_FINALIZATION", // finalization is not used at the moment
// Special flag to work around the lack of __data_start in ld.lld.
// TODO: try to fix this in LLVM/lld directly so we don't have to
@@ -39,6 +42,8 @@ var BoehmGC = Library{
// Do not scan the stack. We have our own mechanism to do this.
"-DSTACK_NOT_SCANNED",
"-DNO_PROC_STAT", // we scan the stack manually (don't read /proc/self/stat on Linux)
"-DSTACKBOTTOM=0", // dummy value, we scan the stack manually
// Assertions can be enabled while debugging GC issues.
//"-DGC_ASSERTIONS",
@@ -63,7 +68,6 @@ var BoehmGC = Library{
"blacklst.c",
"dbg_mlc.c",
"dyn_load.c",
"finalize.c",
"headers.c",
"mach_dep.c",
"malloc.c",
@@ -71,7 +75,6 @@ var BoehmGC = Library{
"mark_rts.c",
"misc.c",
"new_hblk.c",
"obj_map.c",
"os_dep.c",
"reclaim.c",
}
+1 -1
View File
@@ -1046,7 +1046,7 @@ func Build(pkgName, outpath, tmpdir string, config *compileopts.Config) (BuildRe
// Special format for the ESP family of chips (parsed by the ROM
// bootloader).
result.Binary = filepath.Join(tmpdir, "main"+outext)
err := makeESPFirmareImage(result.Executable, result.Binary, outputBinaryFormat)
err := makeESPFirmwareImage(result.Executable, result.Binary, outputBinaryFormat)
if err != nil {
return result, err
}
+13 -8
View File
@@ -144,8 +144,6 @@ bool AssemblerInvocation::CreateFromArgs(AssemblerInvocation &Opts,
.Default(llvm::DebugCompressionType::None);
}
Opts.RelaxELFRelocations = !Args.hasArg(OPT_mrelax_relocations_no);
Opts.SSE2AVX = Args.hasArg(OPT_msse2avx);
if (auto *DwarfFormatArg = Args.getLastArg(OPT_gdwarf64, OPT_gdwarf32))
Opts.Dwarf64 = DwarfFormatArg->getOption().matches(OPT_gdwarf64);
Opts.DwarfVersion = getLastArgIntValue(Args, OPT_dwarf_version_EQ, 2, Diags);
@@ -236,6 +234,9 @@ bool AssemblerInvocation::CreateFromArgs(AssemblerInvocation &Opts,
Opts.EmitCompactUnwindNonCanonical =
Args.hasArg(OPT_femit_compact_unwind_non_canonical);
Opts.Crel = Args.hasArg(OPT_crel);
Opts.ImplicitMapsyms = Args.hasArg(OPT_mmapsyms_implicit);
Opts.X86RelaxRelocations = !Args.hasArg(OPT_mrelax_relocations_no);
Opts.X86Sse2Avx = Args.hasArg(OPT_msse2avx);
Opts.AsSecureLogFile = Args.getLastArgValue(OPT_as_secure_log_file);
@@ -294,8 +295,9 @@ static bool ExecuteAssemblerImpl(AssemblerInvocation &Opts,
MCOptions.EmitCompactUnwindNonCanonical = Opts.EmitCompactUnwindNonCanonical;
MCOptions.MCSaveTempLabels = Opts.SaveTemporaryLabels;
MCOptions.Crel = Opts.Crel;
MCOptions.X86RelaxRelocations = Opts.RelaxELFRelocations;
MCOptions.X86Sse2Avx = Opts.SSE2AVX;
MCOptions.ImplicitMapSyms = Opts.ImplicitMapsyms;
MCOptions.X86RelaxRelocations = Opts.X86RelaxRelocations;
MCOptions.X86Sse2Avx = Opts.X86Sse2Avx;
MCOptions.CompressDebugSections = Opts.CompressDebugSections;
MCOptions.AsSecureLogFile = Opts.AsSecureLogFile;
@@ -343,10 +345,6 @@ static bool ExecuteAssemblerImpl(AssemblerInvocation &Opts,
// MCObjectFileInfo needs a MCContext reference in order to initialize itself.
std::unique_ptr<MCObjectFileInfo> MOFI(
TheTarget->createMCObjectFileInfo(Ctx, PIC));
if (Opts.DarwinTargetVariantTriple)
MOFI->setDarwinTargetVariantTriple(*Opts.DarwinTargetVariantTriple);
if (!Opts.DarwinTargetVariantSDKVersion.empty())
MOFI->setDarwinTargetVariantSDKVersion(Opts.DarwinTargetVariantSDKVersion);
Ctx.setObjectFileInfo(MOFI.get());
if (Opts.GenDwarfForAssembly)
@@ -428,6 +426,13 @@ static bool ExecuteAssemblerImpl(AssemblerInvocation &Opts,
Str.reset(TheTarget->createMCObjectStreamer(
T, Ctx, std::move(MAB), std::move(OW), std::move(CE), *STI));
Str.get()->initSections(Opts.NoExecStack, *STI);
if (T.isOSBinFormatMachO() && T.isOSDarwin()) {
Triple *TVT = Opts.DarwinTargetVariantTriple
? &*Opts.DarwinTargetVariantTriple
: nullptr;
Str->emitVersionForTarget(T, VersionTuple(), TVT,
Opts.DarwinTargetVariantSDKVersion);
}
}
// When -fembed-bitcode is passed to clang_as, a 1-byte marker
+10 -5
View File
@@ -45,10 +45,6 @@ struct AssemblerInvocation {
LLVM_PREFERRED_TYPE(bool)
unsigned GenDwarfForAssembly : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned RelaxELFRelocations : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned SSE2AVX : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned Dwarf64 : 1;
unsigned DwarfVersion;
std::string DwarfDebugFlags;
@@ -117,6 +113,13 @@ struct AssemblerInvocation {
LLVM_PREFERRED_TYPE(bool)
unsigned Crel : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned ImplicitMapsyms : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned X86RelaxRelocations : 1;
LLVM_PREFERRED_TYPE(bool)
unsigned X86Sse2Avx : 1;
/// The name of the relocation model to use.
std::string RelocationModel;
@@ -148,7 +151,6 @@ public:
ShowInst = 0;
ShowEncoding = 0;
RelaxAll = 0;
SSE2AVX = 0;
NoExecStack = 0;
FatalWarnings = 0;
NoWarn = 0;
@@ -160,6 +162,9 @@ public:
EmitDwarfUnwind = EmitDwarfUnwindType::Default;
EmitCompactUnwindNonCanonical = false;
Crel = false;
ImplicitMapsyms = 0;
X86RelaxRelocations = 0;
X86Sse2Avx = 0;
}
static bool CreateFromArgs(AssemblerInvocation &Res,
+1 -1
View File
@@ -60,7 +60,7 @@ bool tinygo_clang_driver(int argc, char **argv) {
}
// Create the actual diagnostics engine.
Clang->createDiagnostics();
Clang->createDiagnostics(*llvm::vfs::getRealFileSystem());
if (!Clang->hasDiagnostics()) {
return false;
}
+2 -2
View File
@@ -23,7 +23,7 @@ type espImageSegment struct {
data []byte
}
// makeESPFirmareImage converts an input ELF file to an image file for an ESP32 or
// makeESPFirmwareImage converts an input ELF file to an image file for an ESP32 or
// ESP8266 chip. This is a special purpose image format just for the ESP chip
// family, and is parsed by the on-chip mask ROM bootloader.
//
@@ -31,7 +31,7 @@ type espImageSegment struct {
// https://github.com/espressif/esptool/wiki/Firmware-Image-Format
// https://github.com/espressif/esp-idf/blob/8fbb63c2a701c22ccf4ce249f43aded73e134a34/components/bootloader_support/include/esp_image_format.h#L58
// https://github.com/espressif/esptool/blob/master/esptool.py
func makeESPFirmareImage(infile, outfile, format string) error {
func makeESPFirmwareImage(infile, outfile, format string) error {
inf, err := elf.Open(infile)
if err != nil {
return err
+3 -3
View File
@@ -42,9 +42,9 @@ func TestBinarySize(t *testing.T) {
// This is a small number of very diverse targets that we want to test.
tests := []sizeTest{
// microcontrollers
{"hifive1b", "examples/echo", 4580, 280, 0, 2264},
{"microbit", "examples/serial", 2928, 388, 8, 2272},
{"wioterminal", "examples/pininterrupt", 7387, 1489, 116, 6912},
{"hifive1b", "examples/echo", 3884, 280, 0, 2268},
{"microbit", "examples/serial", 2852, 360, 8, 2272},
{"wioterminal", "examples/pininterrupt", 7337, 1491, 116, 6912},
// TODO: also check wasm. Right now this is difficult, because
// wasm binaries are run through wasm-opt and therefore the
+3 -3
View File
@@ -38,10 +38,10 @@ func (b *builder) createInlineAsm(args []ssa.Value) (llvm.Value, error) {
// provided immediately. For example:
//
// arm.AsmFull(
// "str {value}, {result}",
// "str {value}, [{result}]",
// map[string]interface{}{
// "value": 1
// "result": &dest,
// "value": 1,
// "result": uintptr(unsafe.Pointer(&dest)),
// })
func (b *builder) createInlineAsmFull(instr *ssa.CallCommon) (llvm.Value, error) {
asmString := constant.StringVal(instr.Args[0].(*ssa.Const).Value)
+1 -1
View File
@@ -218,7 +218,7 @@ func Version() int {
return major
}
// Return the byte order for the given target triple. Most targets are little
// ByteOrder returns the byte order for the given target triple. Most targets are little
// endian, but for example MIPS can be big-endian.
func ByteOrder(target string) binary.ByteOrder {
if strings.HasPrefix(target, "mips-") {
+15 -4
View File
@@ -630,7 +630,7 @@ func (c *compilerContext) addStandardAttributes(llvmFn llvm.Value) {
// linkName is equal to .RelString(nil) on a global and extern is false, but for
// some symbols this is different (due to //go:extern for example).
type globalInfo struct {
linkName string // go:extern
linkName string // go:extern, go:linkname
extern bool // go:extern
align int // go:align
section string // go:section
@@ -715,14 +715,14 @@ func (c *compilerContext) getGlobalInfo(g *ssa.Global) globalInfo {
// Check for //go: pragmas, which may change the link name (among others).
doc := c.astComments[info.linkName]
if doc != nil {
info.parsePragmas(doc)
info.parsePragmas(doc, c, g)
}
return info
}
// Parse //go: pragma comments from the source. In particular, it parses the
// //go:extern pragma on globals.
func (info *globalInfo) parsePragmas(doc *ast.CommentGroup) {
// //go:extern and //go:linkname pragmas on globals.
func (info *globalInfo) parsePragmas(doc *ast.CommentGroup, c *compilerContext, g *ssa.Global) {
for _, comment := range doc.List {
if !strings.HasPrefix(comment.Text, "//go:") {
continue
@@ -743,6 +743,17 @@ func (info *globalInfo) parsePragmas(doc *ast.CommentGroup) {
if len(parts) == 2 {
info.section = parts[1]
}
case "//go:linkname":
if len(parts) != 3 || parts[1] != g.Name() {
continue
}
// Only enable go:linkname when the package imports "unsafe".
// This is a slightly looser requirement than what gc uses: gc
// requires the file to import "unsafe", not the package as a
// whole.
if hasUnsafeImport(g.Pkg.Pkg) {
info.linkName = parts[2]
}
}
}
}
+4 -4
View File
@@ -1,6 +1,6 @@
; ModuleID = 'basic.go'
source_filename = "basic.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%main.kv = type { float, i32, i32, i32 }
@@ -206,7 +206,7 @@ entry:
ret void
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+7 -7
View File
@@ -1,6 +1,6 @@
; ModuleID = 'channel.go'
source_filename = "channel.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime.channelOp = type { ptr, ptr, i32, ptr }
@@ -82,11 +82,11 @@ entry:
store i32 1, ptr %select.send.value, align 4
call void @llvm.lifetime.start.p0(i64 16, ptr nonnull %select.states.alloca)
store ptr %ch1, ptr %select.states.alloca, align 4
%select.states.alloca.repack1 = getelementptr inbounds i8, ptr %select.states.alloca, i32 4
%select.states.alloca.repack1 = getelementptr inbounds nuw i8, ptr %select.states.alloca, i32 4
store ptr %select.send.value, ptr %select.states.alloca.repack1, align 4
%0 = getelementptr inbounds i8, ptr %select.states.alloca, i32 8
%0 = getelementptr inbounds nuw i8, ptr %select.states.alloca, i32 8
store ptr %ch2, ptr %0, align 4
%.repack3 = getelementptr inbounds i8, ptr %select.states.alloca, i32 12
%.repack3 = getelementptr inbounds nuw i8, ptr %select.states.alloca, i32 12
store ptr null, ptr %.repack3, align 4
%select.result = call { i32, i1 } @runtime.chanSelect(ptr undef, ptr nonnull %select.states.alloca, i32 2, i32 2, ptr null, i32 0, i32 0, ptr undef) #4
call void @llvm.lifetime.end.p0(i64 16, ptr nonnull %select.states.alloca)
@@ -107,8 +107,8 @@ select.body: ; preds = %select.next
declare { i32, i1 } @runtime.chanSelect(ptr, ptr, i32, i32, ptr, i32, i32, ptr) #1
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nocallback nofree nosync nounwind willreturn memory(argmem: readwrite) }
attributes #4 = { nounwind }
+7 -7
View File
@@ -27,7 +27,7 @@ entry:
%0 = call ptr @llvm.stacksave.p0()
call void @runtime.setupDeferFrame(ptr nonnull %deferframe.buf, ptr %0, ptr undef) #4
store i32 0, ptr %defer.alloca, align 4
%defer.alloca.repack15 = getelementptr inbounds i8, ptr %defer.alloca, i32 4
%defer.alloca.repack15 = getelementptr inbounds nuw i8, ptr %defer.alloca, i32 4
store ptr null, ptr %defer.alloca.repack15, align 4
store ptr %defer.alloca, ptr %deferPtr, align 4
%setjmp = call i32 asm "\0Amovs r0, #0\0Amov r2, pc\0Astr r2, [r1, #4]", "={r0},{r1},~{r1},~{r2},~{r3},~{r4},~{r5},~{r6},~{r7},~{r8},~{r9},~{r10},~{r11},~{r12},~{lr},~{q0},~{q1},~{q2},~{q3},~{q4},~{q5},~{q6},~{q7},~{q8},~{q9},~{q10},~{q11},~{q12},~{q13},~{q14},~{q15},~{cpsr},~{memory}"(ptr nonnull %deferframe.buf) #5
@@ -51,7 +51,7 @@ rundefers.loophead: ; preds = %3, %rundefers.block
br i1 %stackIsNil, label %rundefers.end, label %rundefers.loop
rundefers.loop: ; preds = %rundefers.loophead
%stack.next.gep = getelementptr inbounds i8, ptr %2, i32 4
%stack.next.gep = getelementptr inbounds nuw i8, ptr %2, i32 4
%stack.next = load ptr, ptr %stack.next.gep, align 4
store ptr %stack.next, ptr %deferPtr, align 4
%callback = load i32, ptr %2, align 4
@@ -87,7 +87,7 @@ rundefers.loophead6: ; preds = %5, %lpad
br i1 %stackIsNil7, label %rundefers.end3, label %rundefers.loop5
rundefers.loop5: ; preds = %rundefers.loophead6
%stack.next.gep8 = getelementptr inbounds i8, ptr %4, i32 4
%stack.next.gep8 = getelementptr inbounds nuw i8, ptr %4, i32 4
%stack.next9 = load ptr, ptr %stack.next.gep8, align 4
store ptr %stack.next9, ptr %deferPtr, align 4
%callback11 = load i32, ptr %4, align 4
@@ -144,11 +144,11 @@ entry:
%0 = call ptr @llvm.stacksave.p0()
call void @runtime.setupDeferFrame(ptr nonnull %deferframe.buf, ptr %0, ptr undef) #4
store i32 0, ptr %defer.alloca, align 4
%defer.alloca.repack22 = getelementptr inbounds i8, ptr %defer.alloca, i32 4
%defer.alloca.repack22 = getelementptr inbounds nuw i8, ptr %defer.alloca, i32 4
store ptr null, ptr %defer.alloca.repack22, align 4
store ptr %defer.alloca, ptr %deferPtr, align 4
store i32 1, ptr %defer.alloca2, align 4
%defer.alloca2.repack23 = getelementptr inbounds i8, ptr %defer.alloca2, i32 4
%defer.alloca2.repack23 = getelementptr inbounds nuw i8, ptr %defer.alloca2, i32 4
store ptr %defer.alloca, ptr %defer.alloca2.repack23, align 4
store ptr %defer.alloca2, ptr %deferPtr, align 4
%setjmp = call i32 asm "\0Amovs r0, #0\0Amov r2, pc\0Astr r2, [r1, #4]", "={r0},{r1},~{r1},~{r2},~{r3},~{r4},~{r5},~{r6},~{r7},~{r8},~{r9},~{r10},~{r11},~{r12},~{lr},~{q0},~{q1},~{q2},~{q3},~{q4},~{q5},~{q6},~{q7},~{q8},~{q9},~{q10},~{q11},~{q12},~{q13},~{q14},~{q15},~{cpsr},~{memory}"(ptr nonnull %deferframe.buf) #5
@@ -172,7 +172,7 @@ rundefers.loophead: ; preds = %4, %3, %rundefers.b
br i1 %stackIsNil, label %rundefers.end, label %rundefers.loop
rundefers.loop: ; preds = %rundefers.loophead
%stack.next.gep = getelementptr inbounds i8, ptr %2, i32 4
%stack.next.gep = getelementptr inbounds nuw i8, ptr %2, i32 4
%stack.next = load ptr, ptr %stack.next.gep, align 4
store ptr %stack.next, ptr %deferPtr, align 4
%callback = load i32, ptr %2, align 4
@@ -218,7 +218,7 @@ rundefers.loophead10: ; preds = %7, %6, %lpad
br i1 %stackIsNil11, label %rundefers.end7, label %rundefers.loop9
rundefers.loop9: ; preds = %rundefers.loophead10
%stack.next.gep12 = getelementptr inbounds i8, ptr %5, i32 4
%stack.next.gep12 = getelementptr inbounds nuw i8, ptr %5, i32 4
%stack.next13 = load ptr, ptr %stack.next.gep12, align 4
store ptr %stack.next13, ptr %deferPtr, align 4
%callback15 = load i32, ptr %5, align 4
+4 -4
View File
@@ -1,6 +1,6 @@
; ModuleID = 'float.go'
source_filename = "float.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
; Function Attrs: allockind("alloc,zeroed") allocsize(0)
@@ -93,6 +93,6 @@ entry:
ret i8 %0
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
+4 -4
View File
@@ -1,6 +1,6 @@
; ModuleID = 'func.go'
source_filename = "func.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
; Function Attrs: allockind("alloc,zeroed") allocsize(0)
@@ -44,7 +44,7 @@ entry:
ret void
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+11 -11
View File
@@ -1,6 +1,6 @@
; ModuleID = 'gc.go'
source_filename = "gc.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime._interface = type { ptr, ptr }
@@ -105,18 +105,18 @@ entry:
%makeslice = call align 1 dereferenceable(5) ptr @runtime.alloc(i32 5, ptr nonnull inttoptr (i32 3 to ptr), ptr undef) #3
call void @runtime.trackPointer(ptr nonnull %makeslice, ptr nonnull %stackalloc, ptr undef) #3
store ptr %makeslice, ptr @main.slice1, align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice1, i32 4), align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice1, i32 8), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice1, i32 4), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice1, i32 8), align 4
%makeslice1 = call align 4 dereferenceable(20) ptr @runtime.alloc(i32 20, ptr nonnull inttoptr (i32 67 to ptr), ptr undef) #3
call void @runtime.trackPointer(ptr nonnull %makeslice1, ptr nonnull %stackalloc, ptr undef) #3
store ptr %makeslice1, ptr @main.slice2, align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice2, i32 4), align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice2, i32 8), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice2, i32 4), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice2, i32 8), align 4
%makeslice3 = call align 4 dereferenceable(60) ptr @runtime.alloc(i32 60, ptr nonnull inttoptr (i32 71 to ptr), ptr undef) #3
call void @runtime.trackPointer(ptr nonnull %makeslice3, ptr nonnull %stackalloc, ptr undef) #3
store ptr %makeslice3, ptr @main.slice3, align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice3, i32 4), align 4
store i32 5, ptr getelementptr inbounds (i8, ptr @main.slice3, i32 8), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice3, i32 4), align 4
store i32 5, ptr getelementptr inbounds nuw (i8, ptr @main.slice3, i32 8), align 4
ret void
}
@@ -127,7 +127,7 @@ entry:
%0 = call align 8 dereferenceable(16) ptr @runtime.alloc(i32 16, ptr null, ptr undef) #3
call void @runtime.trackPointer(ptr nonnull %0, ptr nonnull %stackalloc, ptr undef) #3
store double %v.r, ptr %0, align 8
%.repack1 = getelementptr inbounds i8, ptr %0, i32 8
%.repack1 = getelementptr inbounds nuw i8, ptr %0, i32 8
store double %v.i, ptr %.repack1, align 8
%1 = insertvalue %runtime._interface { ptr @"reflect/types.type:basic:complex128", ptr undef }, ptr %0, 1
call void @runtime.trackPointer(ptr nonnull @"reflect/types.type:basic:complex128", ptr nonnull %stackalloc, ptr undef) #3
@@ -135,7 +135,7 @@ entry:
ret %runtime._interface %1
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+4 -4
View File
@@ -1,6 +1,6 @@
; ModuleID = 'go1.20.go'
source_filename = "go1.20.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime._string = type { ptr, i32 }
@@ -57,7 +57,7 @@ entry:
ret ptr %s.data
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+6 -6
View File
@@ -1,6 +1,6 @@
; ModuleID = 'go1.21.go'
source_filename = "go1.21.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime._string = type { ptr, i32 }
@@ -86,7 +86,7 @@ entry:
%stackalloc = alloca i8, align 1
%4 = call i1 @runtime.stringLess(ptr %a.data, i32 %a.len, ptr %b.data, i32 %b.len, ptr undef) #5
%5 = select i1 %4, %runtime._string %1, %runtime._string %3
%6 = extractvalue %runtime._string %5, 0
%6 = select i1 %4, ptr %a.data, ptr %b.data
call void @runtime.trackPointer(ptr %6, ptr nonnull %stackalloc, ptr undef) #5
ret %runtime._string %5
}
@@ -125,7 +125,7 @@ entry:
%stackalloc = alloca i8, align 1
%4 = call i1 @runtime.stringLess(ptr %b.data, i32 %b.len, ptr %a.data, i32 %a.len, ptr undef) #5
%5 = select i1 %4, %runtime._string %1, %runtime._string %3
%6 = extractvalue %runtime._string %5, 0
%6 = select i1 %4, ptr %a.data, ptr %b.data
call void @runtime.trackPointer(ptr %6, ptr nonnull %stackalloc, ptr undef) #5
ret %runtime._string %5
}
@@ -171,9 +171,9 @@ declare i32 @llvm.smax.i32(i32, i32) #4
; Function Attrs: nocallback nofree nosync nounwind speculatable willreturn memory(none)
declare i32 @llvm.umax.i32(i32, i32) #4
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nocallback nofree nounwind willreturn memory(argmem: write) }
attributes #4 = { nocallback nofree nosync nounwind speculatable willreturn memory(none) }
attributes #5 = { nounwind }
+12 -12
View File
@@ -65,7 +65,7 @@ entry:
store i32 3, ptr %n, align 4
%0 = call align 4 dereferenceable(8) ptr @runtime.alloc(i32 8, ptr null, ptr undef) #9
store i32 5, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr %n, ptr %1, align 4
%stacksize = call i32 @"internal/task.getGoroutineStackSize"(i32 ptrtoint (ptr @"main.closureFunctionGoroutine$1$gowrapper" to i32), ptr undef) #9
call void @"internal/task.start"(i32 ptrtoint (ptr @"main.closureFunctionGoroutine$1$gowrapper" to i32), ptr nonnull %0, i32 %stacksize, ptr undef) #9
@@ -87,7 +87,7 @@ entry:
define linkonce_odr void @"main.closureFunctionGoroutine$1$gowrapper"(ptr %0) unnamed_addr #5 {
entry:
%1 = load i32, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
call void @"main.closureFunctionGoroutine$1"(i32 %1, ptr %3)
ret void
@@ -104,9 +104,9 @@ define hidden void @main.funcGoroutine(ptr %fn.context, ptr %fn.funcptr, ptr %co
entry:
%0 = call align 4 dereferenceable(12) ptr @runtime.alloc(i32 12, ptr null, ptr undef) #9
store i32 5, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr %fn.context, ptr %1, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 8
%2 = getelementptr inbounds nuw i8, ptr %0, i32 8
store ptr %fn.funcptr, ptr %2, align 4
%stacksize = call i32 @"internal/task.getGoroutineStackSize"(i32 ptrtoint (ptr @main.funcGoroutine.gowrapper to i32), ptr undef) #9
call void @"internal/task.start"(i32 ptrtoint (ptr @main.funcGoroutine.gowrapper to i32), ptr nonnull %0, i32 %stacksize, ptr undef) #9
@@ -117,9 +117,9 @@ entry:
define linkonce_odr void @main.funcGoroutine.gowrapper(ptr %0) unnamed_addr #6 {
entry:
%1 = load i32, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
%4 = getelementptr inbounds i8, ptr %0, i32 8
%4 = getelementptr inbounds nuw i8, ptr %0, i32 8
%5 = load ptr, ptr %4, align 4
call void %5(i32 %1, ptr %3) #9
ret void
@@ -154,11 +154,11 @@ define hidden void @main.startInterfaceMethod(ptr %itf.typecode, ptr %itf.value,
entry:
%0 = call align 4 dereferenceable(16) ptr @runtime.alloc(i32 16, ptr null, ptr undef) #9
store ptr %itf.value, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr @"main$string", ptr %1, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 8
%2 = getelementptr inbounds nuw i8, ptr %0, i32 8
store i32 4, ptr %2, align 4
%3 = getelementptr inbounds i8, ptr %0, i32 12
%3 = getelementptr inbounds nuw i8, ptr %0, i32 12
store ptr %itf.typecode, ptr %3, align 4
%stacksize = call i32 @"internal/task.getGoroutineStackSize"(i32 ptrtoint (ptr @"interface:{Print:func:{basic:string}{}}.Print$invoke$gowrapper" to i32), ptr undef) #9
call void @"internal/task.start"(i32 ptrtoint (ptr @"interface:{Print:func:{basic:string}{}}.Print$invoke$gowrapper" to i32), ptr nonnull %0, i32 %stacksize, ptr undef) #9
@@ -171,11 +171,11 @@ declare void @"interface:{Print:func:{basic:string}{}}.Print$invoke"(ptr, ptr, i
define linkonce_odr void @"interface:{Print:func:{basic:string}{}}.Print$invoke$gowrapper"(ptr %0) unnamed_addr #8 {
entry:
%1 = load ptr, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
%4 = getelementptr inbounds i8, ptr %0, i32 8
%4 = getelementptr inbounds nuw i8, ptr %0, i32 8
%5 = load i32, ptr %4, align 4
%6 = getelementptr inbounds i8, ptr %0, i32 12
%6 = getelementptr inbounds nuw i8, ptr %0, i32 12
%7 = load ptr, ptr %6, align 4
call void @"interface:{Print:func:{basic:string}{}}.Print$invoke"(ptr %1, ptr %3, i32 %5, ptr %7, ptr undef) #9
ret void
+22 -22
View File
@@ -1,6 +1,6 @@
; ModuleID = 'goroutine.go'
source_filename = "goroutine.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
@"main$string" = internal unnamed_addr constant [4 x i8] c"test", align 1
@@ -72,7 +72,7 @@ entry:
%0 = call align 4 dereferenceable(8) ptr @runtime.alloc(i32 8, ptr null, ptr undef) #9
call void @runtime.trackPointer(ptr nonnull %0, ptr nonnull %stackalloc, ptr undef) #9
store i32 5, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr %n, ptr %1, align 4
call void @"internal/task.start"(i32 ptrtoint (ptr @"main.closureFunctionGoroutine$1$gowrapper" to i32), ptr nonnull %0, i32 65536, ptr undef) #9
%2 = load i32, ptr %n, align 4
@@ -93,7 +93,7 @@ entry:
define linkonce_odr void @"main.closureFunctionGoroutine$1$gowrapper"(ptr %0) unnamed_addr #5 {
entry:
%1 = load i32, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
call void @"main.closureFunctionGoroutine$1"(i32 %1, ptr %3)
call void @runtime.deadlock(ptr undef) #9
@@ -113,9 +113,9 @@ entry:
%0 = call align 4 dereferenceable(12) ptr @runtime.alloc(i32 12, ptr null, ptr undef) #9
call void @runtime.trackPointer(ptr nonnull %0, ptr nonnull %stackalloc, ptr undef) #9
store i32 5, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr %fn.context, ptr %1, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 8
%2 = getelementptr inbounds nuw i8, ptr %0, i32 8
store ptr %fn.funcptr, ptr %2, align 4
call void @"internal/task.start"(i32 ptrtoint (ptr @main.funcGoroutine.gowrapper to i32), ptr nonnull %0, i32 65536, ptr undef) #9
ret void
@@ -125,9 +125,9 @@ entry:
define linkonce_odr void @main.funcGoroutine.gowrapper(ptr %0) unnamed_addr #6 {
entry:
%1 = load i32, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
%4 = getelementptr inbounds i8, ptr %0, i32 8
%4 = getelementptr inbounds nuw i8, ptr %0, i32 8
%5 = load ptr, ptr %4, align 4
call void %5(i32 %1, ptr %3) #9
call void @runtime.deadlock(ptr undef) #9
@@ -165,11 +165,11 @@ entry:
%0 = call align 4 dereferenceable(16) ptr @runtime.alloc(i32 16, ptr null, ptr undef) #9
call void @runtime.trackPointer(ptr nonnull %0, ptr nonnull %stackalloc, ptr undef) #9
store ptr %itf.value, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %0, i32 4
%1 = getelementptr inbounds nuw i8, ptr %0, i32 4
store ptr @"main$string", ptr %1, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 8
%2 = getelementptr inbounds nuw i8, ptr %0, i32 8
store i32 4, ptr %2, align 4
%3 = getelementptr inbounds i8, ptr %0, i32 12
%3 = getelementptr inbounds nuw i8, ptr %0, i32 12
store ptr %itf.typecode, ptr %3, align 4
call void @"internal/task.start"(i32 ptrtoint (ptr @"interface:{Print:func:{basic:string}{}}.Print$invoke$gowrapper" to i32), ptr nonnull %0, i32 65536, ptr undef) #9
ret void
@@ -181,24 +181,24 @@ declare void @"interface:{Print:func:{basic:string}{}}.Print$invoke"(ptr, ptr, i
define linkonce_odr void @"interface:{Print:func:{basic:string}{}}.Print$invoke$gowrapper"(ptr %0) unnamed_addr #8 {
entry:
%1 = load ptr, ptr %0, align 4
%2 = getelementptr inbounds i8, ptr %0, i32 4
%2 = getelementptr inbounds nuw i8, ptr %0, i32 4
%3 = load ptr, ptr %2, align 4
%4 = getelementptr inbounds i8, ptr %0, i32 8
%4 = getelementptr inbounds nuw i8, ptr %0, i32 8
%5 = load i32, ptr %4, align 4
%6 = getelementptr inbounds i8, ptr %0, i32 12
%6 = getelementptr inbounds nuw i8, ptr %0, i32 12
%7 = load ptr, ptr %6, align 4
call void @"interface:{Print:func:{basic:string}{}}.Print$invoke"(ptr %1, ptr %3, i32 %5, ptr %7, ptr undef) #9
call void @runtime.deadlock(ptr undef) #9
unreachable
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.regularFunction" }
attributes #4 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.inlineFunctionGoroutine$1" }
attributes #5 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.closureFunctionGoroutine$1" }
attributes #6 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper" }
attributes #7 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="reflect/methods.Print(string)" "tinygo-methods"="reflect/methods.Print(string)" }
attributes #8 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="interface:{Print:func:{basic:string}{}}.Print$invoke" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.regularFunction" }
attributes #4 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.inlineFunctionGoroutine$1" }
attributes #5 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="main.closureFunctionGoroutine$1" }
attributes #6 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper" }
attributes #7 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="reflect/methods.Print(string)" "tinygo-methods"="reflect/methods.Print(string)" }
attributes #8 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-gowrapper"="interface:{Print:func:{basic:string}{}}.Print$invoke" }
attributes #9 = { nounwind }
+8 -8
View File
@@ -1,6 +1,6 @@
; ModuleID = 'interface.go'
source_filename = "interface.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime._interface = type { ptr, ptr }
@@ -130,11 +130,11 @@ entry:
declare %runtime._string @"interface:{Error:func:{}{basic:string}}.Error$invoke"(ptr, ptr, ptr) #6
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-methods"="reflect/methods.Error() string" }
attributes #4 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-methods"="reflect/methods.String() string" }
attributes #5 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="main.$methods.foo(int) uint8" "tinygo-methods"="reflect/methods.String() string; main.$methods.foo(int) uint8" }
attributes #6 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="reflect/methods.Error() string" "tinygo-methods"="reflect/methods.Error() string" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-methods"="reflect/methods.Error() string" }
attributes #4 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-methods"="reflect/methods.String() string" }
attributes #5 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="main.$methods.foo(int) uint8" "tinygo-methods"="reflect/methods.String() string; main.$methods.foo(int) uint8" }
attributes #6 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "tinygo-invoke"="reflect/methods.Error() string" "tinygo-methods"="reflect/methods.Error() string" }
attributes #7 = { nounwind }
+4 -4
View File
@@ -1,6 +1,6 @@
; ModuleID = 'pointer.go'
source_filename = "pointer.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
; Function Attrs: allockind("alloc,zeroed") allocsize(0)
@@ -44,7 +44,7 @@ entry:
ret ptr %x
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+11 -11
View File
@@ -1,6 +1,6 @@
; ModuleID = 'pragma.go'
source_filename = "pragma.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
@extern_global = external global [0 x i8], align 1
@@ -93,13 +93,13 @@ entry:
ret void
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="extern_func" }
attributes #4 = { inlinehint nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #5 = { noinline nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #6 = { noinline nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="exportedFunctionInSection" }
attributes #7 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-import-module"="modulename" "wasm-import-name"="import1" }
attributes #8 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-import-module"="foobar" "wasm-import-name"="imported" }
attributes #9 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="exported" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="extern_func" }
attributes #4 = { inlinehint nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #5 = { noinline nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #6 = { noinline nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="exportedFunctionInSection" }
attributes #7 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-import-module"="modulename" "wasm-import-name"="import1" }
attributes #8 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-import-module"="foobar" "wasm-import-name"="imported" }
attributes #9 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" "wasm-export-name"="exported" }
+6 -6
View File
@@ -1,6 +1,6 @@
; ModuleID = 'slice.go'
source_filename = "slice.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
; Function Attrs: allockind("alloc,zeroed") allocsize(0)
@@ -51,9 +51,9 @@ entry:
%varargs = call align 4 dereferenceable(12) ptr @runtime.alloc(i32 12, ptr nonnull inttoptr (i32 3 to ptr), ptr undef) #3
call void @runtime.trackPointer(ptr nonnull %varargs, ptr nonnull %stackalloc, ptr undef) #3
store i32 1, ptr %varargs, align 4
%0 = getelementptr inbounds i8, ptr %varargs, i32 4
%0 = getelementptr inbounds nuw i8, ptr %varargs, i32 4
store i32 2, ptr %0, align 4
%1 = getelementptr inbounds i8, ptr %varargs, i32 8
%1 = getelementptr inbounds nuw i8, ptr %varargs, i32 8
store i32 3, ptr %1, align 4
%append.new = call { ptr, i32, i32 } @runtime.sliceAppend(ptr %ints.data, ptr nonnull %varargs, i32 %ints.len, i32 %ints.cap, i32 3, i32 4, ptr undef) #3
%append.newPtr = extractvalue { ptr, i32, i32 } %append.new, 0
@@ -322,7 +322,7 @@ unsafe.Slice.throw: ; preds = %entry
unreachable
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+6 -6
View File
@@ -1,6 +1,6 @@
; ModuleID = 'string.go'
source_filename = "string.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%runtime._string = type { ptr, i32 }
@@ -84,11 +84,11 @@ declare i1 @runtime.stringLess(ptr, i32, ptr, i32, ptr) #1
define hidden i8 @main.stringLookup(ptr %s.data, i32 %s.len, i8 %x, ptr %context) unnamed_addr #2 {
entry:
%0 = zext i8 %x to i32
%.not = icmp ult i32 %0, %s.len
%.not = icmp ugt i32 %s.len, %0
br i1 %.not, label %lookup.next, label %lookup.throw
lookup.next: ; preds = %entry
%1 = getelementptr inbounds i8, ptr %s.data, i32 %0
%1 = getelementptr inbounds nuw i8, ptr %s.data, i32 %0
%2 = load i8, ptr %1, align 1
ret i8 %2
@@ -97,7 +97,7 @@ lookup.throw: ; preds = %entry
unreachable
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { nounwind }
+19 -19
View File
@@ -1,6 +1,6 @@
; ModuleID = 'zeromap.go'
source_filename = "zeromap.go"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-n32:64-S128-ni:1:10:20"
target datalayout = "e-m:e-p:32:32-p10:8:8-p20:8:8-i64:64-i128:128-n32:64-S128-ni:1:10:20"
target triple = "wasm32-unknown-wasi"
%main.hasPadding = type { i1, i32, i1 }
@@ -27,9 +27,9 @@ entry:
call void @llvm.lifetime.start.p0(i64 4, ptr nonnull %hashmap.value)
call void @llvm.lifetime.start.p0(i64 12, ptr nonnull %hashmap.key)
store %main.hasPadding %2, ptr %hashmap.key, align 4
%3 = getelementptr inbounds i8, ptr %hashmap.key, i32 1
%3 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 1
call void @runtime.memzero(ptr nonnull %3, i32 3, ptr undef) #5
%4 = getelementptr inbounds i8, ptr %hashmap.key, i32 9
%4 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 9
call void @runtime.memzero(ptr nonnull %4, i32 3, ptr undef) #5
%5 = call i1 @runtime.hashmapBinaryGet(ptr %m, ptr nonnull %hashmap.key, ptr nonnull %hashmap.value, i32 4, ptr undef) #5
call void @llvm.lifetime.end.p0(i64 12, ptr nonnull %hashmap.key)
@@ -60,9 +60,9 @@ entry:
store i32 5, ptr %hashmap.value, align 4
call void @llvm.lifetime.start.p0(i64 12, ptr nonnull %hashmap.key)
store %main.hasPadding %2, ptr %hashmap.key, align 4
%3 = getelementptr inbounds i8, ptr %hashmap.key, i32 1
%3 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 1
call void @runtime.memzero(ptr nonnull %3, i32 3, ptr undef) #5
%4 = getelementptr inbounds i8, ptr %hashmap.key, i32 9
%4 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 9
call void @runtime.memzero(ptr nonnull %4, i32 3, ptr undef) #5
call void @runtime.hashmapBinarySet(ptr %m, ptr nonnull %hashmap.key, ptr nonnull %hashmap.value, ptr undef) #5
call void @llvm.lifetime.end.p0(i64 12, ptr nonnull %hashmap.key)
@@ -81,16 +81,16 @@ entry:
call void @llvm.lifetime.start.p0(i64 24, ptr nonnull %hashmap.key)
%s.elt = extractvalue [2 x %main.hasPadding] %s, 0
store %main.hasPadding %s.elt, ptr %hashmap.key, align 4
%hashmap.key.repack1 = getelementptr inbounds i8, ptr %hashmap.key, i32 12
%hashmap.key.repack1 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 12
%s.elt2 = extractvalue [2 x %main.hasPadding] %s, 1
store %main.hasPadding %s.elt2, ptr %hashmap.key.repack1, align 4
%0 = getelementptr inbounds i8, ptr %hashmap.key, i32 1
%0 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 1
call void @runtime.memzero(ptr nonnull %0, i32 3, ptr undef) #5
%1 = getelementptr inbounds i8, ptr %hashmap.key, i32 9
%1 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 9
call void @runtime.memzero(ptr nonnull %1, i32 3, ptr undef) #5
%2 = getelementptr inbounds i8, ptr %hashmap.key, i32 13
%2 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 13
call void @runtime.memzero(ptr nonnull %2, i32 3, ptr undef) #5
%3 = getelementptr inbounds i8, ptr %hashmap.key, i32 21
%3 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 21
call void @runtime.memzero(ptr nonnull %3, i32 3, ptr undef) #5
%4 = call i1 @runtime.hashmapBinaryGet(ptr %m, ptr nonnull %hashmap.key, ptr nonnull %hashmap.value, i32 4, ptr undef) #5
call void @llvm.lifetime.end.p0(i64 24, ptr nonnull %hashmap.key)
@@ -109,16 +109,16 @@ entry:
call void @llvm.lifetime.start.p0(i64 24, ptr nonnull %hashmap.key)
%s.elt = extractvalue [2 x %main.hasPadding] %s, 0
store %main.hasPadding %s.elt, ptr %hashmap.key, align 4
%hashmap.key.repack1 = getelementptr inbounds i8, ptr %hashmap.key, i32 12
%hashmap.key.repack1 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 12
%s.elt2 = extractvalue [2 x %main.hasPadding] %s, 1
store %main.hasPadding %s.elt2, ptr %hashmap.key.repack1, align 4
%0 = getelementptr inbounds i8, ptr %hashmap.key, i32 1
%0 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 1
call void @runtime.memzero(ptr nonnull %0, i32 3, ptr undef) #5
%1 = getelementptr inbounds i8, ptr %hashmap.key, i32 9
%1 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 9
call void @runtime.memzero(ptr nonnull %1, i32 3, ptr undef) #5
%2 = getelementptr inbounds i8, ptr %hashmap.key, i32 13
%2 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 13
call void @runtime.memzero(ptr nonnull %2, i32 3, ptr undef) #5
%3 = getelementptr inbounds i8, ptr %hashmap.key, i32 21
%3 = getelementptr inbounds nuw i8, ptr %hashmap.key, i32 21
call void @runtime.memzero(ptr nonnull %3, i32 3, ptr undef) #5
call void @runtime.hashmapBinarySet(ptr %m, ptr nonnull %hashmap.key, ptr nonnull %hashmap.value, ptr undef) #5
call void @llvm.lifetime.end.p0(i64 24, ptr nonnull %hashmap.key)
@@ -132,9 +132,9 @@ entry:
ret void
}
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { noinline nounwind "target-features"="+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #0 = { allockind("alloc,zeroed") allocsize(0) "alloc-family"="runtime.alloc" "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #1 = { "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #2 = { nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #3 = { noinline nounwind "target-features"="+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types" }
attributes #4 = { nocallback nofree nosync nounwind willreturn memory(argmem: readwrite) }
attributes #5 = { nounwind }
-8
View File
@@ -5,8 +5,6 @@ go 1.22.0
require (
github.com/aykevl/go-wasm v0.0.2-0.20250317121156-42b86c494139
github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2
github.com/chromedp/cdproto v0.0.0-20220113222801-0725d94bb6ee
github.com/chromedp/chromedp v0.7.6
github.com/gofrs/flock v0.8.1
github.com/google/shlex v0.0.0-20181106134648-c34317bd91bf
github.com/inhies/go-bytesize v0.0.0-20220417184213-4913239db9cf
@@ -24,13 +22,7 @@ require (
)
require (
github.com/chromedp/sysutil v1.0.0 // indirect
github.com/creack/goselect v0.1.2 // indirect
github.com/gobwas/httphead v0.1.0 // indirect
github.com/gobwas/pool v0.2.1 // indirect
github.com/gobwas/ws v1.1.0 // indirect
github.com/josharian/intern v1.0.0 // indirect
github.com/mailru/easyjson v0.7.7 // indirect
github.com/mattn/go-isatty v0.0.20 // indirect
github.com/stretchr/testify v1.8.4 // indirect
golang.org/x/text v0.22.0 // indirect
-21
View File
@@ -2,33 +2,16 @@ github.com/aykevl/go-wasm v0.0.2-0.20250317121156-42b86c494139 h1:2O/WuAt8J5id3k
github.com/aykevl/go-wasm v0.0.2-0.20250317121156-42b86c494139/go.mod h1:7sXyiaA0WtSogCu67R2252fQpVmJMh9JWJ9ddtGkpWw=
github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2 h1:oMCHnXa6CCCafdPDbMh/lWRhRByN0VFLvv+g+ayx1SI=
github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2/go.mod h1:PkYb9DJNAwrSvRx5DYA+gUcOIgTGVMNkfSCbZM8cWpI=
github.com/chromedp/cdproto v0.0.0-20211126220118-81fa0469ad77/go.mod h1:At5TxYYdxkbQL0TSefRjhLE3Q0lgvqKKMSFUglJ7i1U=
github.com/chromedp/cdproto v0.0.0-20220113222801-0725d94bb6ee h1:+SFdIVfQpG0s0DHYzou0kgfE0n0ZjKPwbiRJsXrZegU=
github.com/chromedp/cdproto v0.0.0-20220113222801-0725d94bb6ee/go.mod h1:At5TxYYdxkbQL0TSefRjhLE3Q0lgvqKKMSFUglJ7i1U=
github.com/chromedp/chromedp v0.7.6 h1:2juGaktzjwULlsn+DnvIZXFUckEp5xs+GOBroaea+jA=
github.com/chromedp/chromedp v0.7.6/go.mod h1:ayT4YU/MGAALNfOg9gNrpGSAdnU51PMx+FCeuT1iXzo=
github.com/chromedp/sysutil v1.0.0 h1:+ZxhTpfpZlmchB58ih/LBHX52ky7w2VhQVKQMucy3Ic=
github.com/chromedp/sysutil v1.0.0/go.mod h1:kgWmDdq8fTzXYcKIBqIYvRRTnYb9aNS9moAV0xufSww=
github.com/creack/goselect v0.1.2 h1:2DNy14+JPjRBgPzAd1thbQp4BSIihxcBf0IXhQXDRa0=
github.com/creack/goselect v0.1.2/go.mod h1:a/NhLweNvqIYMuxcMOuWY516Cimucms3DglDzQP3hKY=
github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
github.com/gobwas/httphead v0.1.0 h1:exrUm0f4YX0L7EBwZHuCF4GDp8aJfVeBrlLQrs6NqWU=
github.com/gobwas/httphead v0.1.0/go.mod h1:O/RXo79gxV8G+RqlR/otEwx4Q36zl9rqC5u12GKvMCM=
github.com/gobwas/pool v0.2.1 h1:xfeeEhW7pwmX8nuLVlqbzVc7udMDrwetjEv+TZIz1og=
github.com/gobwas/pool v0.2.1/go.mod h1:q8bcK0KcYlCgd9e7WYLm9LpyS+YeLd8JVDW6WezmKEw=
github.com/gobwas/ws v1.1.0 h1:7RFti/xnNkMJnrK7D1yQ/iCIB5OrrY/54/H930kIbHA=
github.com/gobwas/ws v1.1.0/go.mod h1:nzvNcVha5eUziGrbxFCo6qFIojQHjJV5cLYIbezhfL0=
github.com/gofrs/flock v0.8.1 h1:+gYjHKf32LDeiEEFhQaotPbLuUXjY5ZqxKgXy7n59aw=
github.com/gofrs/flock v0.8.1/go.mod h1:F1TvTiK9OcQqauNUHlbJvyl9Qa1QvF/gOUDKA14jxHU=
github.com/google/shlex v0.0.0-20181106134648-c34317bd91bf h1:7+FW5aGwISbqUtkfmIpZJGRgNFg2ioYPvFaUxdqpDsg=
github.com/google/shlex v0.0.0-20181106134648-c34317bd91bf/go.mod h1:RpwtwJQFrIEPstU94h88MWPXP2ektJZ8cZ0YntAmXiE=
github.com/inhies/go-bytesize v0.0.0-20220417184213-4913239db9cf h1:FtEj8sfIcaaBfAKrE1Cwb61YDtYq9JxChK1c7AKce7s=
github.com/inhies/go-bytesize v0.0.0-20220417184213-4913239db9cf/go.mod h1:yrqSXGoD/4EKfF26AOGzscPOgTTJcyAwM2rpixWT+t4=
github.com/josharian/intern v1.0.0 h1:vlS4z54oSdjm0bgjRigI+G1HpF+tI+9rE5LLzOg8HmY=
github.com/josharian/intern v1.0.0/go.mod h1:5DoeVV0s6jJacbCEi61lwdGj/aVlrQvzHFFd8Hwg//Y=
github.com/mailru/easyjson v0.7.7 h1:UGYAvKxe3sBsEDzO8ZeWOSlIQfWFlxbzLZe7hwFURr0=
github.com/mailru/easyjson v0.7.7/go.mod h1:xzfreul335JAWq5oZzymOObrkdz5UnU4kGfJJLY9Nlc=
github.com/marcinbor85/gohex v0.0.0-20200531091804-343a4b548892 h1:6J+qramlHVLmiBOgRiBOnQkno8uprqG6YFFQTt6uYIw=
github.com/marcinbor85/gohex v0.0.0-20200531091804-343a4b548892/go.mod h1:Pb6XcsXyropB9LNHhnqaknG/vEwYztLkQzVCHv8sQ3M=
github.com/mattn/go-colorable v0.1.4/go.mod h1:U0ppj6V5qS13XJ6of8GYAs25YV2eR4EVcfRqFIhoBtE=
@@ -42,8 +25,6 @@ github.com/mattn/go-isatty v0.0.20/go.mod h1:W+V8PltTTMOvKvAeJH7IuucS94S2C6jfK/D
github.com/mattn/go-runewidth v0.0.7/go.mod h1:H031xJmbD/WCDINGzjvQ9THkh0rPKHF+m2gUSrubnMI=
github.com/mattn/go-tty v0.0.4 h1:NVikla9X8MN0SQAqCYzpGyXv0jY7MNl3HOWD2dkle7E=
github.com/mattn/go-tty v0.0.4/go.mod h1:u5GGXBtZU6RQoKV8gY5W6UhMudbR5vXnUe7j3pxse28=
github.com/orisano/pixelmatch v0.0.0-20210112091706-4fa4c7ba91d5 h1:1SoBaSPudixRecmlHXb/GxmaD3fLMtHIDN13QujwQuc=
github.com/orisano/pixelmatch v0.0.0-20210112091706-4fa4c7ba91d5/go.mod h1:nZgzbfBr3hhjoZnS66nKrHmduYNpc34ny7RK4z5/HM0=
github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
github.com/sigurn/crc16 v0.0.0-20211026045750-20ab5afb07e3 h1:aQKxg3+2p+IFXXg97McgDGT5zcMrQoi0EICZs8Pgchs=
@@ -63,8 +44,6 @@ golang.org/x/sync v0.11.0/go.mod h1:Czt+wKu1gCyEFDUtn0jG5QVvpJ6rzVqr5aXyt9drQfk=
golang.org/x/sys v0.0.0-20190222072716-a9d3bda3a223/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
golang.org/x/sys v0.0.0-20191008105621-543471e840be/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20191120155948-bd437916bb0e/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20201207223542-d4d67f95c62d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
golang.org/x/sys v0.0.0-20211124211545-fe61309f8881/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.0.0-20220811171246-fbc7d0a398ab/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.30.0 h1:QjkSwP/36a20jFYWkSue1YwXzLmsV5Gfq7Eiy72C1uc=
+1 -1
View File
@@ -10,7 +10,7 @@ import (
// Version of TinyGo.
// Update this value before release of new version of software.
const version = "0.39.0"
const version = "0.40.0-dev"
// Return TinyGo version, either in the form 0.30.0 or as a development version
// (like 0.30.0-dev-abcd012).
+1 -1
View File
@@ -577,7 +577,7 @@ func (r *runner) run(fn *function, params []value, parentMem *memoryView, indent
// runtime instead of at compile time. But we need to
// revert any changes made by the call first.
if r.debug {
fmt.Fprintln(os.Stderr, indent+"!! revert because of error:", callErr.Err)
fmt.Fprintln(os.Stderr, indent+"!! revert because of error:", callErr.Error())
}
callMem.revert()
err := r.runAtRuntime(fn, inst, locals, &mem, indent)
+1 -1
View File
@@ -10,7 +10,7 @@ target triple = "x86_64--linux"
@main.exposedValue2 = local_unnamed_addr global i16 0
@main.insertedValue = local_unnamed_addr global { i8, i32, { float, { i64, i16 } } } zeroinitializer
@main.gepArray = local_unnamed_addr global [8 x i8] zeroinitializer
@main.negativeGEP = global ptr getelementptr inbounds (i8, ptr @main.negativeGEP, i64 2)
@main.negativeGEP = global ptr getelementptr inbounds nuw (i8, ptr @main.negativeGEP, i64 2)
declare void @runtime.printint64(i64) unnamed_addr
+1 -1
View File
@@ -5,7 +5,7 @@ target triple = "x86_64--linux"
@ptrToIntResult = local_unnamed_addr global i8 2
@pointerTagResult = local_unnamed_addr global i64 2
@someArray = internal global { i16, i8, i8 } zeroinitializer
@someArrayPointer = local_unnamed_addr global ptr getelementptr inbounds (i8, ptr @someArray, i64 2)
@someArrayPointer = local_unnamed_addr global ptr getelementptr inbounds nuw (i8, ptr @someArray, i64 2)
define void @runtime.initAll() local_unnamed_addr {
ret void
-1
View File
@@ -256,7 +256,6 @@ func pathsToOverride(goMinor int, needsSyscallPackage bool) map[string]bool {
"reflect/": false,
"runtime/": false,
"sync/": true,
"testing/": true,
"tinygo/": false,
"unique/": false,
}
+3 -3
View File
@@ -35,8 +35,8 @@ func Monitor(executable, port string, config *compileopts.Config) error {
// Use the RTT interface, which is documented (in part) here:
// https://wiki.segger.com/RTT
// Try to find the "machine.rttSerialInstance" symbol, which is the RTT
// control block.
// Try to find the "_SEGGER_RTT" symbol (machine.rttSerialInstance)
// symbol, which is the RTT control block.
file, err := elf.Open(executable)
if err != nil {
return fmt.Errorf("could not open ELF file to determine RTT control block: %w", err)
@@ -48,7 +48,7 @@ func Monitor(executable, port string, config *compileopts.Config) error {
}
var address uint64
for _, symbol := range symbols {
if symbol.Name == "machine.rttSerialInstance" {
if symbol.Name == "_SEGGER_RTT" {
address = symbol.Value
break
}
+3 -3
View File
@@ -48,10 +48,10 @@ func Asm(asm string)
// recognizes template values in the form {name}, like so:
//
// arm.AsmFull(
// "str {value}, {result}",
// "str {value}, [{result}]",
// map[string]interface{}{
// "value": 1
// "result": &dest,
// "value": 1,
// "result": uintptr(unsafe.Pointer(&dest)),
// })
//
// You can use {} in the asm string (which expands to a register) to set the
-23
View File
@@ -1,29 +1,6 @@
.syntax unified
.cfi_sections .debug_frame
.section .text.HardFault_Handler
.global HardFault_Handler
.type HardFault_Handler, %function
HardFault_Handler:
.cfi_startproc
// Put the old stack pointer in the first argument, for easy debugging. This
// is especially useful on Cortex-M0, which supports far fewer debug
// facilities.
mov r0, sp
// Load the default stack pointer from address 0 so that we can call normal
// functions again that expect a working stack. However, it will corrupt the
// old stack so the function below must not attempt to recover from this
// fault.
movs r3, #0
ldr r3, [r3]
mov sp, r3
// Continue handling this error in Go.
bl handleHardFault
.cfi_endproc
.size HardFault_Handler, .-HardFault_Handler
// This is a convenience function for semihosting support.
// At some point, this should be replaced by inline assembly.
.section .text.SemihostingCall
+3 -3
View File
@@ -10,10 +10,10 @@ func Asm(asm string)
// recognizes template values in the form {name}, like so:
//
// arm.AsmFull(
// "str {value}, {result}",
// "str {value}, [{result}]",
// map[string]interface{}{
// "value": 1
// "result": &dest,
// "value": 1,
// "result": uintptr(unsafe.Pointer(&dest)),
// })
//
// You can use {} in the asm string (which expands to a register) to set the
+3 -3
View File
@@ -10,10 +10,10 @@ func Asm(asm string)
// recognizes template values in the form {name}, like so:
//
// arm.AsmFull(
// "str {value}, {result}",
// "str {value}, [{result}]",
// map[string]interface{}{
// "value": 1
// "result": &dest,
// "value": 1,
// "result": uintptr(unsafe.Pointer(&dest)),
// })
//
// You can use {} in the asm string (which expands to a register) to set the
+3 -3
View File
@@ -10,10 +10,10 @@ func Asm(asm string)
// recognizes template values in the form {name}, like so:
//
// arm.AsmFull(
// "st {value}, {result}",
// "st {value}, [{result}]",
// map[string]interface{}{
// "value": 1
// "result": &dest,
// "value": 1,
// "result": uintptr(unsafe.Pointer(&dest)),
// })
//
// You can use {} in the asm string (which expands to a register) to set the
+2 -2
View File
@@ -15,8 +15,8 @@ const (
P09 Pin = 9
P10 Pin = 10
P11 Pin = 11
P12 Pin = 12
P13 Pin = 13
P12 Pin = 12 // peripherals: I2C0 SDA
P13 Pin = 13 // peripherals: I2C0 SCL
P14 Pin = 14
P15 Pin = 15
P16 Pin = 16
+22
View File
@@ -0,0 +1,22 @@
//go:build gopher_arcade
package machine
// Return the current CPU frequency in hertz.
func CPUFrequency() uint32 {
return 8000000
}
const (
P5 Pin = PB0
P6 Pin = PB1
P7 Pin = PB2
P2 Pin = PB3
P3 Pin = PB4
P1 Pin = PB5
LED = P1
BUTTON_LEFT = P7
BUTTON_RIGHT = P5
SPEAKER = P6
)
+3 -3
View File
@@ -78,14 +78,14 @@ func (i2c *I2C) Tx(addr uint16, w, r []byte) (err error) {
// Allow scheduler to run
gosched()
// Handle errors by ensuring STOP sent on bus
if i2c.Bus.EVENTS_ERROR.Get() != 0 {
// Handle first occurrence of error by ensuring STOP sent on bus
if err == nil && i2c.Bus.EVENTS_ERROR.Get() != 0 {
err = twiCError(i2c.Bus.ERRORSRC.Get())
if i2c.Bus.EVENTS_STOPPED.Get() == 0 {
// STOP cannot be sent during SUSPEND
i2c.Bus.TASKS_RESUME.Set(1)
i2c.Bus.TASKS_STOP.Set(1)
}
err = twiCError(i2c.Bus.ERRORSRC.Get())
}
}
+4
View File
@@ -58,6 +58,10 @@ func machineInit() {
// Peripheral clocks should now all be running
unresetBlockWait(RESETS_RESET_Msk)
// DBGPAUSE pauses the timer when a debugger is connected. This prevents
// sleep functions from ever returning, so disable it.
timer.setDbgPause(false)
}
//go:linkname ticks runtime.machineTicks
+2 -1
View File
@@ -100,7 +100,8 @@ func ReadTemperature() (millicelsius int32) {
rp.ADC.CS.SetBits(rp.ADC_CS_TS_EN)
// T = 27 - (ADC_voltage - 0.706)/0.001721
return (27000<<16 - (int32(thermChan.getVoltage())-706<<16)*581) >> 16
// 1/0.001721 ≈ 581
return int32(((int64(27000) << 16) - ((int64(thermChan.getVoltage()) - (int64(706) << 16)) * 581)) >> 16)
}
// waitForReady spins waiting for the ADC peripheral to become ready.
+12
View File
@@ -101,3 +101,15 @@ func (tmr *timerType) lightSleep(us uint64) {
// Disable interrupt
intr.Disable()
}
// setDbgPause sets whether this timer is paused when a debugger is connected.
func (tmr *timerType) setDbgPause(enable bool) {
const bitPos = 1
const bitMask = 0b11
val := uint32(0b00)
if enable {
// Disable timer when debugger is connected to either core.
val = 0b11
}
tmr.dbgPause.ReplaceBits(val, bitMask, bitPos)
}
+6 -2
View File
@@ -104,7 +104,9 @@ func (uart *UART) SetBaudRate(br uint32) {
func (uart *UART) writeByte(c byte) error {
// wait until buffer is not full
for uart.Bus.UARTFR.HasBits(rp.UART0_UARTFR_TXFF) {
gosched()
if !interrupt.In() {
gosched()
}
}
// write data
@@ -114,7 +116,9 @@ func (uart *UART) writeByte(c byte) error {
func (uart *UART) flush() {
for uart.Bus.UARTFR.HasBits(rp.UART0_UARTFR_BUSY) {
gosched()
if !interrupt.In() {
gosched()
}
}
}
+2
View File
@@ -16,6 +16,8 @@ import (
)
// This symbol name is known by the compiler, see monitor.go.
//
//go:linkname rttSerialInstance _SEGGER_RTT
var rttSerialInstance rttSerial
var Serial = &rttSerialInstance
+1 -1
Submodule src/net updated: 983d88dd7a...bb43b40f19
-1
View File
@@ -12,7 +12,6 @@ package os
import (
"io"
"syscall"
_ "unsafe"
)
const DevNull = "/dev/null"
+2 -2
View File
@@ -81,8 +81,8 @@ func (it *MapIter) Next() bool {
return ((*reflectlite.MapIter)(it)).Next()
}
func (iter *MapIter) Reset(v Value) {
(*reflectlite.MapIter)(iter).Reset(v.Value)
func (it *MapIter) Reset(v Value) {
(*reflectlite.MapIter)(it).Reset(v.Value)
}
func (v Value) Set(x Value) {
+3 -1
View File
@@ -30,7 +30,9 @@ func SetPanicOnFault(enabled bool) bool {
func WriteHeapDump(fd uintptr)
func SetTraceback(level string)
// Unimplemented.
func SetTraceback(level string) {
}
func SetMemoryLimit(limit int64) int64 {
return limit
+5
View File
@@ -1,6 +1,11 @@
package runtime
func Callers(skip int, pc []uintptr) int {
if len(pc) > 0 {
// The testing package expects at least one caller in all cases.
pc[0] = 0
return 1
}
return 0
}
+3
View File
@@ -93,6 +93,9 @@ func runtimePanicAt(addr unsafe.Pointer, msg string) {
trap()
}
if hasReturnAddr {
// Note: the string "panic: runtime error at " is also used in
// runtime_cortexm_hardfault.go. It is kept the same so that the string
// can be deduplicated by the compiler.
printstring("panic: runtime error at ")
printptr(uintptr(addr) - callInstSize)
printstring(": ")
+11
View File
@@ -0,0 +1,11 @@
package runtime
import _ "unsafe"
// TODO: Use hardware when available
//
//go:linkname vgetrandom
func vgetrandom(p []byte, flags uint32) (ret int, supported bool) { return 0, false }
//go:linkname fatal crypto/internal/sysrand.fatal
func fatal(msg string) { runtimePanic(msg) }
+22
View File
@@ -57,6 +57,12 @@ func memzero(ptr unsafe.Pointer, size uintptr)
// the current stack pointer in a platform-independent way.
func stacksave() unsafe.Pointer
// Special LLVM intrinsic that returns the SP register on entry to the calling
// function.
//
//export llvm.sponentry.p0
func llvm_sponentry() unsafe.Pointer
//export strlen
func strlen(ptr unsafe.Pointer) uintptr
@@ -175,3 +181,19 @@ func getAuxv() []uintptr {
func cgo_errno() uintptr {
return uintptr(*libc_errno_location())
}
// Unimplemented.
var MemProfileRate int = 0
// Unimplemented.
func SetBlockProfileRate(rate int) {
}
var mutexProfileFraction int
// Unimplemented.
func SetMutexProfileFraction(rate int) int {
previous := mutexProfileFraction
mutexProfileFraction = rate
return previous
}
+13 -27
View File
@@ -2,39 +2,25 @@
package runtime
import (
"unsafe"
)
// This function is called at HardFault.
// Before this function is called, the stack pointer is reset to the initial
// stack pointer (loaded from address 0x0) and the previous stack pointer is
// passed as an argument to this function. This allows for easy inspection of
// the stack the moment a HardFault occurs, but it means that the stack will be
// corrupted by this function and thus this handler must not attempt to recover.
//
// For details, see:
// https://community.arm.com/developer/ip-products/system/f/embedded-forum/3257/debugging-a-cortex-m0-hard-fault
// https://blog.feabhas.com/2013/02/developing-a-generic-hard-fault-handler-for-arm-cortex-m3cortex-m4/
//
//export handleHardFault
func handleHardFault(sp *interruptStack) {
print("fatal error: ")
if uintptr(unsafe.Pointer(sp)) < 0x20000000 {
print("stack overflow")
} else {
// TODO: try to find the cause of the hard fault. Especially on
// Cortex-M3 and higher it is possible to find more detailed information
// in special status registers.
print("HardFault")
}
print(" with sp=", sp)
if uintptr(unsafe.Pointer(&sp.PC)) >= 0x20000000 {
// Only print the PC if it points into memory.
// It may not point into memory during a stack overflow, so check that
// first before accessing the stack.
print(" pc=", sp.PC)
}
//export HardFault_Handler
func HardFault_Handler() {
// Obtain the stack pointer as it was on entry to the HardFault. It contains
// the registers that were pushed by the NVIC and that we can now read back
// to print the PC value at the time of the hard fault, for example.
sp := (*interruptStack)(llvm_sponentry())
// Note: by reusing the string "panic: runtime error at " we save a little
// bit in terms of code size as the string can be deduplicated.
print("panic: runtime error at ", sp.PC, ": HardFault with sp=", sp)
// TODO: try to find the cause of the hard fault. Especially on Cortex-M3
// and higher it is possible to find more detailed information in special
// status registers.
println()
abort()
}
@@ -18,8 +18,13 @@ const (
// See runtime_cortexm_hardfault.go
//
//go:export handleHardFault
func handleHardFault(sp *interruptStack) {
//export HardFault_Handler
func HardFault_Handler() {
// Obtain the stack pointer as it was on entry to the HardFault. It contains
// the registers that were pushed by the NVIC and that we can now read back
// to print the PC value at the time of the hard fault, for example.
sp := (*interruptStack)(llvm_sponentry())
fault := GetFaultStatus()
spValid := !fault.Bus().ImpreciseDataBusError()
+21 -8
View File
@@ -14,6 +14,7 @@ import (
)
const numCPU = 2
const numSpinlocks = 32
// machineTicks is provided by package machine.
func machineTicks() uint64
@@ -291,12 +292,19 @@ func coreStackTop(core uint32) uintptr {
// These spinlocks are needed by the runtime.
var (
printLock = spinLock{id: 0}
schedulerLock = spinLock{id: 1}
atomicsLock = spinLock{id: 2}
futexLock = spinLock{id: 3}
printLock = spinLock{id: 20}
schedulerLock = spinLock{id: 21}
atomicsLock = spinLock{id: 22}
futexLock = spinLock{id: 23}
)
func resetSpinLocks() {
for i := uint8(0); i < numSpinlocks; i++ {
l := &spinLock{id: i}
l.spinlock().Set(0)
}
}
// A hardware spinlock, one of the 32 spinlocks defined in the SIO peripheral.
type spinLock struct {
id uint8
@@ -311,15 +319,13 @@ func (l *spinLock) Lock() {
// Wait for the lock to be available.
spinlock := l.spinlock()
for spinlock.Get() == 0 {
// TODO: use wfe and send an event when unlocking so the CPU can go to
// sleep while waiting for the lock.
// Unfortunately when doing that, time.Sleep() seems to hang somewhere.
// This needs some debugging to figure out.
arm.Asm("wfe")
}
}
func (l *spinLock) Unlock() {
l.spinlock().Set(0)
arm.Asm("sev")
}
// Wait until a signal is received, indicating that it can resume from the
@@ -359,9 +365,16 @@ func init() {
machine.InitSerial()
}
func prerun() {
// Reset spinlocks before the full machineInit() so the scheduler doesn't
// hang waiting for schedulerLock after a soft reset.
resetSpinLocks()
}
//export Reset_Handler
func main() {
preinit()
prerun()
run()
exit(0)
}
+57
View File
@@ -31,6 +31,9 @@ type RWMutex struct {
const rwMutexMaxReaders = 1 << 30
// Lock locks rw for writing.
// If the lock is already locked for reading or writing,
// Lock blocks until the lock is available.
func (rw *RWMutex) Lock() {
// Exclusive lock for writers.
rw.writerLock.Lock()
@@ -56,6 +59,12 @@ func (rw *RWMutex) Lock() {
rw.writer.Store(0)
}
// Unlock unlocks rw for writing. It is a run-time error if rw is
// not locked for writing on entry to Unlock.
//
// As with Mutexes, a locked [RWMutex] is not associated with a particular
// goroutine. One goroutine may [RWMutex.RLock] ([RWMutex.Lock]) a RWMutex and then
// arrange for another goroutine to [RWMutex.RUnlock] ([RWMutex.Unlock]) it.
func (rw *RWMutex) Unlock() {
// Signal that new readers can lock this mutex.
waiting := rw.readers.Add(rwMutexMaxReaders)
@@ -68,6 +77,31 @@ func (rw *RWMutex) Unlock() {
rw.writerLock.Unlock()
}
// TryLock tries to lock m and reports whether it succeeded.
//
// Note that while correct uses of TryLock do exist, they are rare,
// and use of TryLock is often a sign of a deeper problem
// in a particular use of mutexes.
func (rw *RWMutex) TryLock() bool {
// Check for active writers
if !rw.writerLock.TryLock() {
return false
}
// Have write lock, now check for active readers
n := uint32(rwMutexMaxReaders)
if !rw.readers.CompareAndSwap(0, -n) {
// Active readers, give up write lock
rw.writerLock.Unlock()
return false
}
return true
}
// RLock locks rw for reading.
//
// It should not be used for recursive read locking; a blocked Lock
// call excludes new readers from acquiring the lock. See the
// documentation on the [RWMutex] type.
func (rw *RWMutex) RLock() {
// Add us as a reader.
newVal := rw.readers.Add(1)
@@ -79,6 +113,10 @@ func (rw *RWMutex) RLock() {
}
}
// RUnlock undoes a single [RWMutex.RLock] call;
// it does not affect other simultaneous readers.
// It is a run-time error if rw is not locked for reading
// on entry to RUnlock.
func (rw *RWMutex) RUnlock() {
// Remove us as a reader.
one := uint32(1)
@@ -98,6 +136,25 @@ func (rw *RWMutex) RUnlock() {
}
}
// TryRLock tries to lock rw for reading and reports whether it succeeded.
//
// Note that while correct uses of TryRLock do exist, they are rare,
// and use of TryRLock is often a sign of a deeper problem
// in a particular use of mutexes.
func (rw *RWMutex) TryRLock() bool {
for {
c := rw.readers.Load()
if c < 0 {
// There is a writer waiting or writing.
return false
}
if rw.readers.CompareAndSwap(c, c+1) {
// Read lock obtained.
return true
}
}
}
type Locker interface {
Lock()
Unlock()
+29 -1
View File
@@ -7,7 +7,13 @@ import (
"testing"
)
func HammerMutex(m *sync.Mutex, loops int, cdone chan bool) {
type mutex interface {
Lock()
Unlock()
TryLock() bool
}
func HammerMutex(m mutex, loops int, cdone chan bool) {
for i := 0; i < loops; i++ {
if i%3 == 0 {
if m.TryLock() {
@@ -240,3 +246,25 @@ func TestRWMutexReadToWrite(t *testing.T) {
t.Errorf("write lock acquired while %d readers were active", res)
}
}
func TestRWMutex(t *testing.T) {
m := new(sync.RWMutex)
m.Lock()
if m.TryLock() {
t.Fatalf("TryLock succeeded with mutex locked")
}
m.Unlock()
if !m.TryLock() {
t.Fatalf("TryLock failed with mutex unlocked")
}
m.Unlock()
c := make(chan bool)
for i := 0; i < 10; i++ {
go HammerMutex(m, 1000, c)
}
for i := 0; i < 10; i++ {
<-c
}
}
-521
View File
@@ -1,521 +0,0 @@
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
//
// This file has been modified for use by the TinyGo compiler.
package testing
import (
"flag"
"fmt"
"io"
"math"
"os"
"runtime"
"strconv"
"strings"
"time"
)
func initBenchmarkFlags() {
matchBenchmarks = flag.String("test.bench", "", "run only benchmarks matching `regexp`")
benchmarkMemory = flag.Bool("test.benchmem", false, "print memory allocations for benchmarks")
flag.Var(&benchTime, "test.benchtime", "run each benchmark for duration `d`")
}
var (
matchBenchmarks *string
benchmarkMemory *bool
benchTime = benchTimeFlag{d: 1 * time.Second} // changed during test of testing package
)
type benchTimeFlag struct {
d time.Duration
n int
}
func (f *benchTimeFlag) String() string {
if f.n > 0 {
return fmt.Sprintf("%dx", f.n)
}
return time.Duration(f.d).String()
}
func (f *benchTimeFlag) Set(s string) error {
if strings.HasSuffix(s, "x") {
n, err := strconv.ParseInt(s[:len(s)-1], 10, 0)
if err != nil || n <= 0 {
return fmt.Errorf("invalid count")
}
*f = benchTimeFlag{n: int(n)}
return nil
}
d, err := time.ParseDuration(s)
if err != nil || d <= 0 {
return fmt.Errorf("invalid duration")
}
*f = benchTimeFlag{d: d}
return nil
}
// InternalBenchmark is an internal type but exported because it is cross-package;
// it is part of the implementation of the "go test" command.
type InternalBenchmark struct {
Name string
F func(b *B)
}
// B is a type passed to Benchmark functions to manage benchmark
// timing and to specify the number of iterations to run.
//
// A benchmark ends when its Benchmark function returns or calls any of the methods
// FailNow, Fatal, Fatalf, SkipNow, Skip, or Skipf. Those methods must be called
// only from the goroutine running the Benchmark function.
// The other reporting methods, such as the variations of Log and Error,
// may be called simultaneously from multiple goroutines.
//
// Like in tests, benchmark logs are accumulated during execution
// and dumped to standard output when done. Unlike in tests, benchmark logs
// are always printed, so as not to hide output whose existence may be
// affecting benchmark results.
type B struct {
common
context *benchContext
N int
benchFunc func(b *B)
bytes int64
missingBytes bool // one of the subbenchmarks does not have bytes set.
benchTime benchTimeFlag
timerOn bool
result BenchmarkResult
// report memory statistics
showAllocResult bool
// initial state of MemStats.Mallocs and MemStats.TotalAlloc
startAllocs uint64
startBytes uint64
// net total after running benchmar
netAllocs uint64
netBytes uint64
}
// StartTimer starts timing a test. This function is called automatically
// before a benchmark starts, but it can also be used to resume timing after
// a call to StopTimer.
func (b *B) StartTimer() {
if !b.timerOn {
b.start = time.Now()
b.timerOn = true
var mstats runtime.MemStats
runtime.ReadMemStats(&mstats)
b.startAllocs = mstats.Mallocs
b.startBytes = mstats.TotalAlloc
}
}
// StopTimer stops timing a test. This can be used to pause the timer
// while performing complex initialization that you don't
// want to measure.
func (b *B) StopTimer() {
if b.timerOn {
b.duration += time.Since(b.start)
b.timerOn = false
var mstats runtime.MemStats
runtime.ReadMemStats(&mstats)
b.netAllocs += mstats.Mallocs - b.startAllocs
b.netBytes += mstats.TotalAlloc - b.startBytes
}
}
// ResetTimer zeroes the elapsed benchmark time and memory allocation counters
// and deletes user-reported metrics.
func (b *B) ResetTimer() {
if b.timerOn {
b.start = time.Now()
var mstats runtime.MemStats
runtime.ReadMemStats(&mstats)
b.startAllocs = mstats.Mallocs
b.startBytes = mstats.TotalAlloc
}
b.duration = 0
b.netAllocs = 0
b.netBytes = 0
}
// SetBytes records the number of bytes processed in a single operation.
// If this is called, the benchmark will report ns/op and MB/s.
func (b *B) SetBytes(n int64) { b.bytes = n }
// ReportAllocs enables malloc statistics for this benchmark.
// It is equivalent to setting -test.benchmem, but it only affects the
// benchmark function that calls ReportAllocs.
func (b *B) ReportAllocs() {
b.showAllocResult = true
}
// runN runs a single benchmark for the specified number of iterations.
func (b *B) runN(n int) {
b.N = n
runtime.GC()
b.ResetTimer()
b.StartTimer()
b.benchFunc(b)
b.StopTimer()
}
func min(x, y int64) int64 {
if x > y {
return y
}
return x
}
func max(x, y int64) int64 {
if x < y {
return y
}
return x
}
// run1 runs the first iteration of benchFunc. It reports whether more
// iterations of this benchmarks should be run.
func (b *B) run1() bool {
if ctx := b.context; ctx != nil {
// Extend maxLen, if needed.
if n := len(b.name); n > ctx.maxLen {
ctx.maxLen = n + 8 // Add additional slack to avoid too many jumps in size.
}
}
b.runN(1)
return !b.hasSub
}
// run executes the benchmark.
func (b *B) run() {
if b.context != nil {
// Running go test --test.bench
b.processBench(b.context) // calls doBench and prints results
} else {
// Running func Benchmark.
b.doBench()
}
}
func (b *B) doBench() BenchmarkResult {
// in upstream, this uses a goroutine
b.launch()
return b.result
}
// launch launches the benchmark function. It gradually increases the number
// of benchmark iterations until the benchmark runs for the requested benchtime.
// run1 must have been called on b.
func (b *B) launch() {
// Run the benchmark for at least the specified amount of time.
if b.benchTime.n > 0 {
b.runN(b.benchTime.n)
} else {
d := b.benchTime.d
b.failed = false
b.duration = 0
for n := int64(1); !b.failed && b.duration < d && n < 1e9; {
last := n
// Predict required iterations.
goalns := d.Nanoseconds()
prevIters := int64(b.N)
prevns := b.duration.Nanoseconds()
if prevns <= 0 {
// Round up, to avoid div by zero.
prevns = 1
}
// Order of operations matters.
// For very fast benchmarks, prevIters ~= prevns.
// If you divide first, you get 0 or 1,
// which can hide an order of magnitude in execution time.
// So multiply first, then divide.
n = goalns * prevIters / prevns
// Run more iterations than we think we'll need (1.2x).
n += n / 5
// Don't grow too fast in case we had timing errors previously.
n = min(n, 100*last)
// Be sure to run at least one more than last time.
n = max(n, last+1)
// Don't run more than 1e9 times. (This also keeps n in int range on 32 bit platforms.)
n = min(n, 1e9)
b.runN(int(n))
}
}
b.result = BenchmarkResult{b.N, b.duration, b.bytes, b.netAllocs, b.netBytes}
}
// BenchmarkResult contains the results of a benchmark run.
type BenchmarkResult struct {
N int // The number of iterations.
T time.Duration // The total time taken.
Bytes int64 // Bytes processed in one iteration.
MemAllocs uint64 // The total number of memory allocations.
MemBytes uint64 // The total number of bytes allocated.
}
// NsPerOp returns the "ns/op" metric.
func (r BenchmarkResult) NsPerOp() int64 {
if r.N <= 0 {
return 0
}
return r.T.Nanoseconds() / int64(r.N)
}
// mbPerSec returns the "MB/s" metric.
func (r BenchmarkResult) mbPerSec() float64 {
if r.Bytes <= 0 || r.T <= 0 || r.N <= 0 {
return 0
}
return (float64(r.Bytes) * float64(r.N) / 1e6) / r.T.Seconds()
}
// AllocsPerOp returns the "allocs/op" metric,
// which is calculated as r.MemAllocs / r.N.
func (r BenchmarkResult) AllocsPerOp() int64 {
if r.N <= 0 {
return 0
}
return int64(r.MemAllocs) / int64(r.N)
}
// AllocedBytesPerOp returns the "B/op" metric,
// which is calculated as r.MemBytes / r.N.
func (r BenchmarkResult) AllocedBytesPerOp() int64 {
if r.N <= 0 {
return 0
}
return int64(r.MemBytes) / int64(r.N)
}
// String returns a summary of the benchmark results.
// It follows the benchmark result line format from
// https://golang.org/design/14313-benchmark-format, not including the
// benchmark name.
// Extra metrics override built-in metrics of the same name.
// String does not include allocs/op or B/op, since those are reported
// by MemString.
func (r BenchmarkResult) String() string {
buf := new(strings.Builder)
fmt.Fprintf(buf, "%8d", r.N)
// Get ns/op as a float.
ns := float64(r.T.Nanoseconds()) / float64(r.N)
if ns != 0 {
buf.WriteByte('\t')
prettyPrint(buf, ns, "ns/op")
}
if mbs := r.mbPerSec(); mbs != 0 {
fmt.Fprintf(buf, "\t%7.2f MB/s", mbs)
}
return buf.String()
}
// MemString returns r.AllocedBytesPerOp and r.AllocsPerOp in the same format as 'go test'.
func (r BenchmarkResult) MemString() string {
return fmt.Sprintf("%8d B/op\t%8d allocs/op",
r.AllocedBytesPerOp(), r.AllocsPerOp())
}
func prettyPrint(w io.Writer, x float64, unit string) {
// Print all numbers with 10 places before the decimal point
// and small numbers with four sig figs. Field widths are
// chosen to fit the whole part in 10 places while aligning
// the decimal point of all fractional formats.
var format string
switch y := math.Abs(x); {
case y == 0 || y >= 999.95:
format = "%10.0f %s"
case y >= 99.995:
format = "%12.1f %s"
case y >= 9.9995:
format = "%13.2f %s"
case y >= 0.99995:
format = "%14.3f %s"
case y >= 0.099995:
format = "%15.4f %s"
case y >= 0.0099995:
format = "%16.5f %s"
case y >= 0.00099995:
format = "%17.6f %s"
default:
format = "%18.7f %s"
}
fmt.Fprintf(w, format, x, unit)
}
type benchContext struct {
match *matcher
maxLen int // The largest recorded benchmark name.
}
func runBenchmarks(matchString func(pat, str string) (bool, error), benchmarks []InternalBenchmark) bool {
// If no flag was specified, don't run benchmarks.
if len(*matchBenchmarks) == 0 {
return true
}
ctx := &benchContext{
match: newMatcher(matchString, *matchBenchmarks, "-test.bench", flagSkipRegexp),
}
var bs []InternalBenchmark
for _, Benchmark := range benchmarks {
if _, matched, _ := ctx.match.fullName(nil, Benchmark.Name); matched {
bs = append(bs, Benchmark)
benchName := Benchmark.Name
if l := len(benchName); l > ctx.maxLen {
ctx.maxLen = l
}
}
}
main := &B{
common: common{
output: &logger{},
name: "Main",
},
benchTime: benchTime,
benchFunc: func(b *B) {
for _, Benchmark := range bs {
b.Run(Benchmark.Name, Benchmark.F)
}
},
context: ctx,
}
main.runN(1)
return true
}
// processBench runs bench b and prints the results.
func (b *B) processBench(ctx *benchContext) {
benchName := b.name
for i := 0; i < flagCount; i++ {
if ctx != nil {
fmt.Printf("%-*s\t", ctx.maxLen, benchName)
}
r := b.doBench()
if b.failed {
// The output could be very long here, but probably isn't.
// We print it all, regardless, because we don't want to trim the reason
// the benchmark failed.
fmt.Printf("--- FAIL: %s\n%s", benchName, "") // b.output)
return
}
if ctx != nil {
results := r.String()
if *benchmarkMemory || b.showAllocResult {
results += "\t" + r.MemString()
}
fmt.Println(results)
// Print any benchmark output
if b.output.Len() > 0 {
fmt.Printf("--- BENCH: %s\n", benchName)
b.output.WriteTo(os.Stdout)
}
}
}
}
// Run benchmarks f as a subbenchmark with the given name. It reports
// true if the subbenchmark succeeded.
//
// A subbenchmark is like any other benchmark. A benchmark that calls Run at
// least once will not be measured itself and will be called once with N=1.
func (b *B) Run(name string, f func(b *B)) bool {
benchName, ok, partial := b.name, true, false
if b.context != nil {
benchName, ok, partial = b.context.match.fullName(&b.common, name)
}
if !ok {
return true
}
b.hasSub = true
sub := &B{
common: common{
output: &logger{},
name: benchName,
level: b.level + 1,
},
benchFunc: f,
benchTime: b.benchTime,
context: b.context,
}
if partial {
// Partial name match, like -bench=X/Y matching BenchmarkX.
// Only process sub-benchmarks, if any.
sub.hasSub = true
}
if sub.run1() {
sub.run()
}
b.add(sub.result)
return !sub.failed
}
// add simulates running benchmarks in sequence in a single iteration. It is
// used to give some meaningful results in case func Benchmark is used in
// combination with Run.
func (b *B) add(other BenchmarkResult) {
r := &b.result
// The aggregated BenchmarkResults resemble running all subbenchmarks as
// in sequence in a single benchmark.
r.N = 1
r.T += time.Duration(other.NsPerOp())
if other.Bytes == 0 {
// Summing Bytes is meaningless in aggregate if not all subbenchmarks
// set it.
b.missingBytes = true
r.Bytes = 0
}
if !b.missingBytes {
r.Bytes += other.Bytes
}
}
// A PB is used by RunParallel for running parallel benchmarks.
type PB struct {
}
// Next reports whether there are more iterations to execute.
func (pb *PB) Next() bool {
return false
}
// RunParallel runs a benchmark in parallel.
//
// Not implemented
func (b *B) RunParallel(body func(*PB)) {
return
}
func (b *B) Loop() bool {
panic("unimplemented: testing.B.Loop")
}
// Benchmark benchmarks a single function. It is useful for creating
// custom benchmarks that do not use the "go test" command.
//
// If f calls Run, the result will be an estimate of running all its
// subbenchmarks that don't call Run in sequence in a single benchmark.
func Benchmark(f func(b *B)) BenchmarkResult {
b := &B{
benchFunc: f,
benchTime: benchTime,
}
if b.run1() {
b.run()
}
return b.result
}
-55
View File
@@ -1,55 +0,0 @@
// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package testing_test
import (
"testing"
)
var buf = make([]byte, 13579)
func NonASCII(b []byte, i int, offset int) int {
for i = offset; i < len(b)+offset; i++ {
if b[i%len(b)] >= 0x80 {
break
}
}
return i
}
func BenchmarkFastNonASCII(b *testing.B) {
var val int
for i := 0; i < b.N; i++ {
val += NonASCII(buf, 0, 0)
}
}
func BenchmarkSlowNonASCII(b *testing.B) {
var val int
for i := 0; i < b.N; i++ {
val += NonASCII(buf, 0, 0)
val += NonASCII(buf, 0, 1)
}
}
// TestBenchmark simply uses Benchmark twice and makes sure it does not crash.
func TestBenchmark(t *testing.T) {
// FIXME: reduce runtime from the current 3 seconds.
rslow := testing.Benchmark(BenchmarkSlowNonASCII)
rfast := testing.Benchmark(BenchmarkFastNonASCII)
tslow := rslow.NsPerOp()
tfast := rfast.NsPerOp()
// Be exceedingly forgiving; do not fail even if system gets busy.
speedup := float64(tslow) / float64(tfast)
if speedup < 0.3 {
t.Errorf("Expected speedup >= 0.3, got %f", speedup)
}
}
func BenchmarkSub(b *testing.B) {
b.Run("Fast", func(b *testing.B) { BenchmarkFastNonASCII(b) })
b.Run("Slow", func(b *testing.B) { BenchmarkSlowNonASCII(b) })
}
-6
View File
@@ -1,6 +0,0 @@
package testing
/*
This is a sad stub of the upstream testing package because it doesn't compile
with tinygo right now.
*/
-143
View File
@@ -1,143 +0,0 @@
package testing
import (
"errors"
"fmt"
"reflect"
"time"
)
// InternalFuzzTarget is an internal type but exported because it is
// cross-package; it is part of the implementation of the "go test" command.
type InternalFuzzTarget struct {
Name string
Fn func(f *F)
}
// F is a type passed to fuzz tests.
//
// Fuzz tests run generated inputs against a provided fuzz target, which can
// find and report potential bugs in the code being tested.
//
// A fuzz test runs the seed corpus by default, which includes entries provided
// by (*F).Add and entries in the testdata/fuzz/<FuzzTestName> directory. After
// any necessary setup and calls to (*F).Add, the fuzz test must then call
// (*F).Fuzz to provide the fuzz target. See the testing package documentation
// for an example, and see the F.Fuzz and F.Add method documentation for
// details.
//
// *F methods can only be called before (*F).Fuzz. Once the test is
// executing the fuzz target, only (*T) methods can be used. The only *F methods
// that are allowed in the (*F).Fuzz function are (*F).Failed and (*F).Name.
type F struct {
common
fuzzContext *fuzzContext
testContext *testContext
// inFuzzFn is true when the fuzz function is running. Most F methods cannot
// be called when inFuzzFn is true.
inFuzzFn bool
// corpus is a set of seed corpus entries, added with F.Add and loaded
// from testdata.
corpus []corpusEntry
result fuzzResult
fuzzCalled bool
}
// corpusEntry is an alias to the same type as internal/fuzz.CorpusEntry.
// We use a type alias because we don't want to export this type, and we can't
// import internal/fuzz from testing.
type corpusEntry = struct {
Parent string
Path string
Data []byte
Values []interface{}
Generation int
IsSeed bool
}
// Add will add the arguments to the seed corpus for the fuzz test. This will be
// a no-op if called after or within the fuzz target, and args must match the
// arguments for the fuzz target.
func (f *F) Add(args ...interface{}) {
var values []interface{}
for i := range args {
if t := reflect.TypeOf(args[i]); !supportedTypes[t] {
panic(fmt.Sprintf("testing: unsupported type to Add %v", t))
}
values = append(values, args[i])
}
f.corpus = append(f.corpus, corpusEntry{Values: values, IsSeed: true, Path: fmt.Sprintf("seed#%d", len(f.corpus))})
}
// supportedTypes represents all of the supported types which can be fuzzed.
var supportedTypes = map[reflect.Type]bool{
reflect.TypeOf(([]byte)("")): true,
reflect.TypeOf((string)("")): true,
reflect.TypeOf((bool)(false)): true,
reflect.TypeOf((byte)(0)): true,
reflect.TypeOf((rune)(0)): true,
reflect.TypeOf((float32)(0)): true,
reflect.TypeOf((float64)(0)): true,
reflect.TypeOf((int)(0)): true,
reflect.TypeOf((int8)(0)): true,
reflect.TypeOf((int16)(0)): true,
reflect.TypeOf((int32)(0)): true,
reflect.TypeOf((int64)(0)): true,
reflect.TypeOf((uint)(0)): true,
reflect.TypeOf((uint8)(0)): true,
reflect.TypeOf((uint16)(0)): true,
reflect.TypeOf((uint32)(0)): true,
reflect.TypeOf((uint64)(0)): true,
}
// Fuzz runs the fuzz function, ff, for fuzz testing. If ff fails for a set of
// arguments, those arguments will be added to the seed corpus.
//
// ff must be a function with no return value whose first argument is *T and
// whose remaining arguments are the types to be fuzzed.
// For example:
//
// f.Fuzz(func(t *testing.T, b []byte, i int) { ... })
//
// The following types are allowed: []byte, string, bool, byte, rune, float32,
// float64, int, int8, int16, int32, int64, uint, uint8, uint16, uint32, uint64.
// More types may be supported in the future.
//
// ff must not call any *F methods, e.g. (*F).Log, (*F).Error, (*F).Skip. Use
// the corresponding *T method instead. The only *F methods that are allowed in
// the (*F).Fuzz function are (*F).Failed and (*F).Name.
//
// This function should be fast and deterministic, and its behavior should not
// depend on shared state. No mutatable input arguments, or pointers to them,
// should be retained between executions of the fuzz function, as the memory
// backing them may be mutated during a subsequent invocation. ff must not
// modify the underlying data of the arguments provided by the fuzzing engine.
//
// When fuzzing, F.Fuzz does not return until a problem is found, time runs out
// (set with -fuzztime), or the test process is interrupted by a signal. F.Fuzz
// should be called exactly once, unless F.Skip or F.Fail is called beforehand.
func (f *F) Fuzz(ff interface{}) {
f.failed = true
f.result.N = 0
f.result.T = 0
f.result.Error = errors.New("operation not implemented")
return
}
// fuzzContext holds fields common to all fuzz tests.
type fuzzContext struct {
deps testDeps
mode fuzzMode
}
type fuzzMode uint8
// fuzzResult contains the results of a fuzz run.
type fuzzResult struct {
N int // The number of iterations.
T time.Duration // The total time taken.
Error error // Error is the error from the failing input
}
-9
View File
@@ -1,9 +0,0 @@
// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
//
//go:build baremetal
package testing
const isBaremetal = true
-9
View File
@@ -1,9 +0,0 @@
// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
//
//go:build !baremetal
package testing
const isBaremetal = false
-323
View File
@@ -1,323 +0,0 @@
// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package testing
import (
"fmt"
"os"
"strconv"
"strings"
"sync"
)
// matcher sanitizes, uniques, and filters names of subtests and subbenchmarks.
type matcher struct {
filter filterMatch
skip filterMatch
matchFunc func(pat, str string) (bool, error)
mu sync.Mutex
// subNames is used to deduplicate subtest names.
// Each key is the subtest name joined to the deduplicated name of the parent test.
// Each value is the count of the number of occurrences of the given subtest name
// already seen.
subNames map[string]int32
}
type filterMatch interface {
// matches checks the name against the receiver's pattern strings using the
// given match function.
matches(name []string, matchString func(pat, str string) (bool, error)) (ok, partial bool)
// verify checks that the receiver's pattern strings are valid filters by
// calling the given match function.
verify(name string, matchString func(pat, str string) (bool, error)) error
}
// simpleMatch matches a test name if all of the pattern strings match in
// sequence.
type simpleMatch []string
// alternationMatch matches a test name if one of the alternations match.
type alternationMatch []filterMatch
// TODO: fix test_main to avoid race and improve caching, also allowing to
// eliminate this Mutex.
var matchMutex sync.Mutex
func allMatcher() *matcher {
return newMatcher(nil, "", "", "")
}
func newMatcher(matchString func(pat, str string) (bool, error), patterns, name, skips string) *matcher {
if isBaremetal {
matchString = fakeMatchString
}
var filter, skip filterMatch
if patterns == "" {
filter = simpleMatch{} // always partial true
} else {
filter = splitRegexp(patterns)
if err := filter.verify(name, matchString); err != nil {
fmt.Fprintf(os.Stderr, "testing: invalid regexp for %s\n", err)
os.Exit(1)
}
}
if skips == "" {
skip = alternationMatch{} // always false
} else {
skip = splitRegexp(skips)
if err := skip.verify("-test.skip", matchString); err != nil {
fmt.Fprintf(os.Stderr, "testing: invalid regexp for %v\n", err)
os.Exit(1)
}
}
return &matcher{
filter: filter,
skip: skip,
matchFunc: matchString,
subNames: map[string]int32{},
}
}
func (m *matcher) fullName(c *common, subname string) (name string, ok, partial bool) {
name = subname
m.mu.Lock()
defer m.mu.Unlock()
if c != nil && c.level > 0 {
name = m.unique(c.name, rewrite(subname))
}
matchMutex.Lock()
defer matchMutex.Unlock()
// We check the full array of paths each time to allow for the case that a pattern contains a '/'.
elem := strings.Split(name, "/")
// filter must match.
// accept partial match that may produce full match later.
ok, partial = m.filter.matches(elem, m.matchFunc)
if !ok {
return name, false, false
}
// skip must not match.
// ignore partial match so we can get to more precise match later.
skip, partialSkip := m.skip.matches(elem, m.matchFunc)
if skip && !partialSkip {
return name, false, false
}
return name, ok, partial
}
// clearSubNames clears the matcher's internal state, potentially freeing
// memory. After this is called, T.Name may return the same strings as it did
// for earlier subtests.
func (m *matcher) clearSubNames() {
m.mu.Lock()
defer m.mu.Unlock()
for key := range m.subNames {
delete(m.subNames, key)
}
}
func (m simpleMatch) matches(name []string, matchString func(pat, str string) (bool, error)) (ok, partial bool) {
for i, s := range name {
if i >= len(m) {
break
}
if ok, _ := matchString(m[i], s); !ok {
return false, false
}
}
return true, len(name) < len(m)
}
func (m simpleMatch) verify(name string, matchString func(pat, str string) (bool, error)) error {
for i, s := range m {
m[i] = rewrite(s)
}
// Verify filters before doing any processing.
for i, s := range m {
if _, err := matchString(s, "non-empty"); err != nil {
return fmt.Errorf("element %d of %s (%q): %s", i, name, s, err)
}
}
return nil
}
func (m alternationMatch) matches(name []string, matchString func(pat, str string) (bool, error)) (ok, partial bool) {
for _, m := range m {
if ok, partial = m.matches(name, matchString); ok {
return ok, partial
}
}
return false, false
}
func (m alternationMatch) verify(name string, matchString func(pat, str string) (bool, error)) error {
for i, m := range m {
if err := m.verify(name, matchString); err != nil {
return fmt.Errorf("alternation %d of %s", i, err)
}
}
return nil
}
func splitRegexp(s string) filterMatch {
a := make(simpleMatch, 0, strings.Count(s, "/"))
b := make(alternationMatch, 0, strings.Count(s, "|"))
cs := 0
cp := 0
for i := 0; i < len(s); {
switch s[i] {
case '[':
cs++
case ']':
if cs--; cs < 0 { // An unmatched ']' is legal.
cs = 0
}
case '(':
if cs == 0 {
cp++
}
case ')':
if cs == 0 {
cp--
}
case '\\':
i++
case '/':
if cs == 0 && cp == 0 {
a = append(a, s[:i])
s = s[i+1:]
i = 0
continue
}
case '|':
if cs == 0 && cp == 0 {
a = append(a, s[:i])
s = s[i+1:]
i = 0
b = append(b, a)
a = make(simpleMatch, 0, len(a))
continue
}
}
i++
}
a = append(a, s)
if len(b) == 0 {
return a
}
return append(b, a)
}
// unique creates a unique name for the given parent and subname by affixing it
// with one or more counts, if necessary.
func (m *matcher) unique(parent, subname string) string {
base := parent + "/" + subname
for {
n := m.subNames[base]
if n < 0 {
panic("subtest count overflow")
}
m.subNames[base] = n + 1
if n == 0 && subname != "" {
prefix, nn := parseSubtestNumber(base)
if len(prefix) < len(base) && nn < m.subNames[prefix] {
// This test is explicitly named like "parent/subname#NN",
// and #NN was already used for the NNth occurrence of "parent/subname".
// Loop to add a disambiguating suffix.
continue
}
return base
}
name := fmt.Sprintf("%s#%02d", base, n)
if m.subNames[name] != 0 {
// This is the nth occurrence of base, but the name "parent/subname#NN"
// collides with the first occurrence of a subtest *explicitly* named
// "parent/subname#NN". Try the next number.
continue
}
return name
}
}
// parseSubtestNumber splits a subtest name into a "#%02d"-formatted int32
// suffix (if present), and a prefix preceding that suffix (always).
func parseSubtestNumber(s string) (prefix string, nn int32) {
i := strings.LastIndex(s, "#")
if i < 0 {
return s, 0
}
prefix, suffix := s[:i], s[i+1:]
if len(suffix) < 2 || (len(suffix) > 2 && suffix[0] == '0') {
// Even if suffix is numeric, it is not a possible output of a "%02" format
// string: it has either too few digits or too many leading zeroes.
return s, 0
}
if suffix == "00" {
if !strings.HasSuffix(prefix, "/") {
// We only use "#00" as a suffix for subtests named with the empty
// string — it isn't a valid suffix if the subtest name is non-empty.
return s, 0
}
}
n, err := strconv.ParseInt(suffix, 10, 32)
if err != nil || n < 0 {
return s, 0
}
return prefix, int32(n)
}
// rewrite rewrites a subname to having only printable characters and no white
// space.
func rewrite(s string) string {
b := []byte{}
for _, r := range s {
switch {
case isSpace(r):
b = append(b, '_')
case !strconv.IsPrint(r):
s := strconv.QuoteRune(r)
b = append(b, s[1:len(s)-1]...)
default:
b = append(b, string(r)...)
}
}
return string(b)
}
func isSpace(r rune) bool {
if r < 0x2000 {
switch r {
// Note: not the same as Unicode Z class.
case '\t', '\n', '\v', '\f', '\r', ' ', 0x85, 0xA0, 0x1680:
return true
}
} else {
if r <= 0x200a {
return true
}
switch r {
case 0x2028, 0x2029, 0x202f, 0x205f, 0x3000:
return true
}
}
return false
}
-259
View File
@@ -1,259 +0,0 @@
// Copyright 2015 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package testing
import (
"fmt"
"reflect"
"regexp"
"strings"
"unicode"
)
// Verify that our IsSpace agrees with unicode.IsSpace.
func TestIsSpace(t *T) {
n := 0
for r := rune(0); r <= unicode.MaxRune; r++ {
if isSpace(r) != unicode.IsSpace(r) {
t.Errorf("IsSpace(%U)=%t incorrect", r, isSpace(r))
n++
if n > 10 {
return
}
}
}
}
func TestSplitRegexp(t *T) {
res := func(s ...string) filterMatch { return simpleMatch(s) }
alt := func(m ...filterMatch) filterMatch { return alternationMatch(m) }
testCases := []struct {
pattern string
result filterMatch
}{
// Correct patterns
// If a regexp pattern is correct, all split regexps need to be correct
// as well.
{"", res("")},
{"/", res("", "")},
{"//", res("", "", "")},
{"A", res("A")},
{"A/B", res("A", "B")},
{"A/B/", res("A", "B", "")},
{"/A/B/", res("", "A", "B", "")},
{"[A]/(B)", res("[A]", "(B)")},
{"[/]/[/]", res("[/]", "[/]")},
{"[/]/[:/]", res("[/]", "[:/]")},
{"/]", res("", "]")},
{"]/", res("]", "")},
{"]/[/]", res("]", "[/]")},
{`([)/][(])`, res(`([)/][(])`)},
{"[(]/[)]", res("[(]", "[)]")},
{"A/B|C/D", alt(res("A", "B"), res("C", "D"))},
// Faulty patterns
// Errors in original should produce at least one faulty regexp in results.
{")/", res(")/")},
{")/(/)", res(")/(", ")")},
{"a[/)b", res("a[/)b")},
{"(/]", res("(/]")},
{"(/", res("(/")},
{"[/]/[/", res("[/]", "[/")},
{`\p{/}`, res(`\p{`, "}")},
{`\p/`, res(`\p`, "")},
{`[[:/:]]`, res(`[[:/:]]`)},
}
for _, tc := range testCases {
a := splitRegexp(tc.pattern)
if !reflect.DeepEqual(a, tc.result) {
t.Errorf("splitRegexp(%q) = %#v; want %#v", tc.pattern, a, tc.result)
}
// If there is any error in the pattern, one of the returned subpatterns
// needs to have an error as well.
if _, err := regexp.Compile(tc.pattern); err != nil {
ok := true
if err := a.verify("", regexp.MatchString); err != nil {
ok = false
}
if ok {
t.Errorf("%s: expected error in any of %q", tc.pattern, a)
}
}
}
}
func TestMatcher(t *T) {
testCases := []struct {
pattern string
skip string
parent, sub string
ok bool
partial bool
}{
// Behavior without subtests.
{"", "", "", "TestFoo", true, false},
{"TestFoo", "", "", "TestFoo", true, false},
{"TestFoo/", "", "", "TestFoo", true, true},
{"TestFoo/bar/baz", "", "", "TestFoo", true, true},
{"TestFoo", "", "", "TestBar", false, false},
{"TestFoo/", "", "", "TestBar", false, false},
{"TestFoo/bar/baz", "", "", "TestBar/bar/baz", false, false},
{"", "TestBar", "", "TestFoo", true, false},
{"", "TestBar", "", "TestBar", false, false},
// Skipping a non-existent test doesn't change anything.
{"", "TestFoo/skipped", "", "TestFoo", true, false},
{"TestFoo", "TestFoo/skipped", "", "TestFoo", true, false},
{"TestFoo/", "TestFoo/skipped", "", "TestFoo", true, true},
{"TestFoo/bar/baz", "TestFoo/skipped", "", "TestFoo", true, true},
{"TestFoo", "TestFoo/skipped", "", "TestBar", false, false},
{"TestFoo/", "TestFoo/skipped", "", "TestBar", false, false},
{"TestFoo/bar/baz", "TestFoo/skipped", "", "TestBar/bar/baz", false, false},
// with subtests
{"", "", "TestFoo", "x", true, false},
{"TestFoo", "", "TestFoo", "x", true, false},
{"TestFoo/", "", "TestFoo", "x", true, false},
{"TestFoo/bar/baz", "", "TestFoo", "bar", true, true},
{"", "TestFoo/skipped", "TestFoo", "x", true, false},
{"TestFoo", "TestFoo/skipped", "TestFoo", "x", true, false},
{"TestFoo", "TestFoo/skipped", "TestFoo", "skipped", false, false},
{"TestFoo/", "TestFoo/skipped", "TestFoo", "x", true, false},
{"TestFoo/bar/baz", "TestFoo/skipped", "TestFoo", "bar", true, true},
// Subtest with a '/' in its name still allows for copy and pasted names
// to match.
{"TestFoo/bar/baz", "", "TestFoo", "bar/baz", true, false},
{"TestFoo/bar/baz", "TestFoo/bar/baz", "TestFoo", "bar/baz", false, false},
{"TestFoo/bar/baz", "TestFoo/bar/baz/skip", "TestFoo", "bar/baz", true, false},
{"TestFoo/bar/baz", "", "TestFoo/bar", "baz", true, false},
{"TestFoo/bar/baz", "", "TestFoo", "x", false, false},
{"TestFoo", "", "TestBar", "x", false, false},
{"TestFoo/", "", "TestBar", "x", false, false},
{"TestFoo/bar/baz", "", "TestBar", "x/bar/baz", false, false},
{"A/B|C/D", "", "TestA", "B", true, false},
{"A/B|C/D", "", "TestC", "D", true, false},
{"A/B|C/D", "", "TestA", "C", false, false},
// subtests only
{"", "", "TestFoo", "x", true, false},
{"/", "", "TestFoo", "x", true, false},
{"./", "", "TestFoo", "x", true, false},
{"./.", "", "TestFoo", "x", true, false},
{"/bar/baz", "", "TestFoo", "bar", true, true},
{"/bar/baz", "", "TestFoo", "bar/baz", true, false},
{"//baz", "", "TestFoo", "bar/baz", true, false},
{"//", "", "TestFoo", "bar/baz", true, false},
{"/bar/baz", "", "TestFoo/bar", "baz", true, false},
{"//foo", "", "TestFoo", "bar/baz", false, false},
{"/bar/baz", "", "TestFoo", "x", false, false},
{"/bar/baz", "", "TestBar", "x/bar/baz", false, false},
}
for _, tc := range testCases {
m := newMatcher(regexp.MatchString, tc.pattern, "-test.run", tc.skip)
parent := &common{name: tc.parent}
if tc.parent != "" {
parent.level = 1
}
if n, ok, partial := m.fullName(parent, tc.sub); ok != tc.ok || partial != tc.partial {
t.Errorf("for pattern %q, fullName(parent=%q, sub=%q) = %q, ok %v partial %v; want ok %v partial %v",
tc.pattern, tc.parent, tc.sub, n, ok, partial, tc.ok, tc.partial)
}
}
}
var namingTestCases = []struct{ name, want string }{
// Uniqueness
{"", "x/#00"},
{"", "x/#01"},
{"#0", "x/#0"}, // Doesn't conflict with #00 because the number of digits differs.
{"#00", "x/#00#01"}, // Conflicts with implicit #00 (used above), so add a suffix.
{"#", "x/#"},
{"#", "x/##01"},
{"t", "x/t"},
{"t", "x/t#01"},
{"t", "x/t#02"},
{"t#00", "x/t#00"}, // Explicit "#00" doesn't conflict with the unsuffixed first subtest.
{"a#01", "x/a#01"}, // user has subtest with this name.
{"a", "x/a"}, // doesn't conflict with this name.
{"a", "x/a#02"}, // This string is claimed now, so resume
{"a", "x/a#03"}, // with counting.
{"a#02", "x/a#02#01"}, // We already used a#02 once, so add a suffix.
{"b#00", "x/b#00"},
{"b", "x/b"}, // Implicit 0 doesn't conflict with explicit "#00".
{"b", "x/b#01"},
{"b#9223372036854775807", "x/b#9223372036854775807"}, // MaxInt64
{"b", "x/b#02"},
{"b", "x/b#03"},
// Sanitizing
{"A:1 B:2", "x/A:1_B:2"},
{"s\t\r\u00a0", "x/s___"},
{"\x01", `x/\x01`},
{"\U0010ffff", `x/\U0010ffff`},
}
func TestNaming(t *T) {
m := newMatcher(regexp.MatchString, "", "", "")
parent := &common{name: "x", level: 1} // top-level test.
for i, tc := range namingTestCases {
if got, _, _ := m.fullName(parent, tc.name); got != tc.want {
t.Errorf("%d:%s: got %q; want %q", i, tc.name, got, tc.want)
}
}
}
func FuzzNaming(f *F) {
for _, tc := range namingTestCases {
f.Add(tc.name)
}
parent := &common{name: "x", level: 1}
var m *matcher
var seen map[string]string
reset := func() {
m = allMatcher()
seen = make(map[string]string)
}
reset()
f.Fuzz(func(t *T, subname string) {
if len(subname) > 10 {
// Long names attract the OOM killer.
t.Skip()
}
name := m.unique(parent.name, subname)
if !strings.Contains(name, "/"+subname) {
t.Errorf("name %q does not contain subname %q", name, subname)
}
if prev, ok := seen[name]; ok {
t.Errorf("name %q generated by both %q and %q", name, prev, subname)
}
if len(seen) > 1e6 {
// Free up memory.
reset()
}
seen[name] = subname
})
}
// GoString returns a string that is more readable than the default, which makes
// it easier to read test errors.
func (m alternationMatch) GoString() string {
s := make([]string, len(m))
for i, m := range m {
s[i] = fmt.Sprintf("%#v", m)
}
return fmt.Sprintf("(%s)", strings.Join(s, " | "))
}
-80
View File
@@ -1,80 +0,0 @@
// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package testing
import (
"reflect"
)
func TestCleanup(t *T) {
var cleanups []int
t.Run("test", func(t *T) {
t.Cleanup(func() { cleanups = append(cleanups, 1) })
t.Cleanup(func() { cleanups = append(cleanups, 2) })
})
if got, want := cleanups, []int{2, 1}; !reflect.DeepEqual(got, want) {
t.Errorf("unexpected cleanup record; got %v want %v", got, want)
}
}
func TestRunCleanup(t *T) {
outerCleanup := 0
innerCleanup := 0
t.Run("test", func(t *T) {
t.Cleanup(func() { outerCleanup++ })
t.Run("x", func(t *T) {
t.Cleanup(func() { innerCleanup++ })
})
})
if innerCleanup != 1 {
t.Errorf("unexpected inner cleanup count; got %d want 1", innerCleanup)
}
if outerCleanup != 1 {
t.Errorf("unexpected outer cleanup count; got %d want 1", outerCleanup) // wrong upstream!
}
}
func TestCleanupParallelSubtests(t *T) {
ranCleanup := 0
t.Run("test", func(t *T) {
t.Cleanup(func() { ranCleanup++ })
t.Run("x", func(t *T) {
t.Parallel()
if ranCleanup > 0 {
t.Error("outer cleanup ran before parallel subtest")
}
})
})
if ranCleanup != 1 {
t.Errorf("unexpected cleanup count; got %d want 1", ranCleanup)
}
}
func TestNestedCleanup(t *T) {
ranCleanup := 0
t.Run("test", func(t *T) {
t.Cleanup(func() {
if ranCleanup != 2 {
t.Errorf("unexpected cleanup count in first cleanup: got %d want 2", ranCleanup)
}
ranCleanup++
})
t.Cleanup(func() {
if ranCleanup != 0 {
t.Errorf("unexpected cleanup count in second cleanup: got %d want 0", ranCleanup)
}
ranCleanup++
t.Cleanup(func() {
if ranCleanup != 1 {
t.Errorf("unexpected cleanup count in nested cleanup: got %d want 1", ranCleanup)
}
ranCleanup++
})
})
})
if ranCleanup != 3 {
t.Errorf("unexpected cleanup count: got %d want 3", ranCleanup)
}
}
-686
View File
@@ -1,686 +0,0 @@
// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
//
// This file has been modified for use by the TinyGo compiler.
// src: https://github.com/golang/go/blob/61bb56ad/src/testing/testing.go
// Package testing provides support for automated testing of Go packages.
package testing
import (
"bytes"
"errors"
"flag"
"fmt"
"io"
"io/fs"
"math/rand"
"os"
"path/filepath"
"runtime"
"strconv"
"strings"
"time"
"unicode"
"unicode/utf8"
)
// Testing flags.
var (
flagVerbose bool
flagShort bool
flagRunRegexp string
flagSkipRegexp string
flagShuffle string
flagCount int
)
var initRan bool
// Init registers testing flags. It has no effect if it has already run.
func Init() {
if initRan {
return
}
initRan = true
flag.BoolVar(&flagVerbose, "test.v", false, "verbose: print additional output")
flag.BoolVar(&flagShort, "test.short", false, "short: run smaller test suite to save time")
flag.StringVar(&flagRunRegexp, "test.run", "", "run: regexp of tests to run")
flag.StringVar(&flagSkipRegexp, "test.skip", "", "skip: regexp of tests to run")
flag.StringVar(&flagShuffle, "test.shuffle", "off", "shuffle: off, on, <numeric-seed>")
flag.IntVar(&flagCount, "test.count", 1, "run each test or benchmark `count` times")
initBenchmarkFlags()
}
// common holds the elements common between T and B and
// captures common methods such as Errorf.
type common struct {
output *logger
indent string
ran bool // Test or benchmark (or one of its subtests) was executed.
failed bool // Test or benchmark has failed.
skipped bool // Test of benchmark has been skipped.
cleanups []func() // optional functions to be called at the end of the test
finished bool // Test function has completed.
hasSub bool // TODO: should be atomic
parent *common
level int // Nesting depth of test or benchmark.
name string // Name of test or benchmark.
start time.Time // Time test or benchmark started
duration time.Duration
tempDir string
tempDirErr error
tempDirSeq int32
}
type logger struct {
logToStdout bool
b bytes.Buffer
}
func (l *logger) Write(p []byte) (int, error) {
if l.logToStdout {
return os.Stdout.Write(p)
}
return l.b.Write(p)
}
func (l *logger) WriteTo(w io.Writer) (int64, error) {
if l.logToStdout {
// We've already been logging to stdout; nothing to do.
return 0, nil
}
return l.b.WriteTo(w)
}
func (l *logger) Len() int {
return l.b.Len()
}
// Short reports whether the -test.short flag is set.
func Short() bool {
return flagShort
}
// CoverMode reports what the test coverage mode is set to.
//
// Test coverage is not supported; this returns the empty string.
func CoverMode() string {
return ""
}
// Verbose reports whether the -test.v flag is set.
func Verbose() bool {
return flagVerbose
}
// String constant that is being set when running a test.
var testBinary string
// Testing returns whether the program was compiled as a test, using "tinygo
// test". It returns false when built using "tinygo build", "tinygo flash", etc.
func Testing() bool {
return testBinary == "1"
}
// flushToParent writes c.output to the parent after first writing the header
// with the given format and arguments.
func (c *common) flushToParent(testName, format string, args ...interface{}) {
if c.parent == nil {
// The fake top-level test doesn't want a FAIL or PASS banner.
// Not quite sure how this works upstream.
c.output.WriteTo(os.Stdout)
} else {
fmt.Fprintf(c.parent.output, format, args...)
c.output.WriteTo(c.parent.output)
}
}
// fmtDuration returns a string representing d in the form "87.00s".
func fmtDuration(d time.Duration) string {
return fmt.Sprintf("%.2fs", d.Seconds())
}
// TB is the interface common to T and B.
type TB interface {
Cleanup(func())
Error(args ...interface{})
Errorf(format string, args ...interface{})
Fail()
FailNow()
Failed() bool
Fatal(args ...interface{})
Fatalf(format string, args ...interface{})
Helper()
Log(args ...interface{})
Logf(format string, args ...interface{})
Name() string
Setenv(key, value string)
Skip(args ...interface{})
SkipNow()
Skipf(format string, args ...interface{})
Skipped() bool
TempDir() string
}
var _ TB = (*T)(nil)
var _ TB = (*B)(nil)
// T is a type passed to Test functions to manage test state and support formatted test logs.
// Logs are accumulated during execution and dumped to standard output when done.
type T struct {
common
context *testContext // For running tests and subtests.
}
// Name returns the name of the running test or benchmark.
func (c *common) Name() string {
return c.name
}
func (c *common) setRan() {
if c.parent != nil {
c.parent.setRan()
}
c.ran = true
}
// Fail marks the function as having failed but continues execution.
func (c *common) Fail() {
c.failed = true
}
// Failed reports whether the function has failed.
func (c *common) Failed() bool {
failed := c.failed
return failed
}
// FailNow marks the function as having failed and stops its execution
// by calling runtime.Goexit (which then runs all deferred calls in the
// current goroutine).
func (c *common) FailNow() {
c.Fail()
c.finished = true
c.Error("FailNow is incomplete, requires runtime.Goexit()")
}
// log generates the output.
func (c *common) log(s string) {
// This doesn't print the same as in upstream go, but works for now.
if len(s) != 0 && s[len(s)-1] == '\n' {
s = s[:len(s)-1]
}
lines := strings.Split(s, "\n")
// First line.
fmt.Fprintf(c.output, "%s %s\n", c.indent, lines[0])
// More lines.
for _, line := range lines[1:] {
fmt.Fprintf(c.output, "%s %s\n", c.indent, line)
}
}
// Log formats its arguments using default formatting, analogous to Println,
// and records the text in the error log. For tests, the text will be printed only if
// the test fails or the -test.v flag is set. For benchmarks, the text is always
// printed to avoid having performance depend on the value of the -test.v flag.
func (c *common) Log(args ...interface{}) { c.log(fmt.Sprintln(args...)) }
// Logf formats its arguments according to the format, analogous to Printf, and
// records the text in the error log. A final newline is added if not provided. For
// tests, the text will be printed only if the test fails or the -test.v flag is
// set. For benchmarks, the text is always printed to avoid having performance
// depend on the value of the -test.v flag.
func (c *common) Logf(format string, args ...interface{}) { c.log(fmt.Sprintf(format, args...)) }
// Error is equivalent to Log followed by Fail.
func (c *common) Error(args ...interface{}) {
c.log(fmt.Sprintln(args...))
c.Fail()
}
// Errorf is equivalent to Logf followed by Fail.
func (c *common) Errorf(format string, args ...interface{}) {
c.log(fmt.Sprintf(format, args...))
c.Fail()
}
// Fatal is equivalent to Log followed by FailNow.
func (c *common) Fatal(args ...interface{}) {
c.log(fmt.Sprintln(args...))
c.FailNow()
}
// Fatalf is equivalent to Logf followed by FailNow.
func (c *common) Fatalf(format string, args ...interface{}) {
c.log(fmt.Sprintf(format, args...))
c.FailNow()
}
// Skip is equivalent to Log followed by SkipNow.
func (c *common) Skip(args ...interface{}) {
c.log(fmt.Sprintln(args...))
c.SkipNow()
}
// Skipf is equivalent to Logf followed by SkipNow.
func (c *common) Skipf(format string, args ...interface{}) {
c.log(fmt.Sprintf(format, args...))
c.SkipNow()
}
// SkipNow marks the test as having been skipped and stops its execution
// by calling runtime.Goexit.
func (c *common) SkipNow() {
c.skip()
c.finished = true
c.Error("SkipNow is incomplete, requires runtime.Goexit()")
}
func (c *common) skip() {
c.skipped = true
}
// Skipped reports whether the test was skipped.
func (c *common) Skipped() bool {
return c.skipped
}
// Helper is not implemented, it is only provided for compatibility.
func (c *common) Helper() {
// Unimplemented.
}
// Cleanup registers a function to be called when the test (or subtest) and all its
// subtests complete. Cleanup functions will be called in last added,
// first called order.
func (c *common) Cleanup(f func()) {
c.cleanups = append(c.cleanups, f)
}
// TempDir returns a temporary directory for the test to use.
// The directory is automatically removed by Cleanup when the test and
// all its subtests complete.
// Each subsequent call to t.TempDir returns a unique directory;
// if the directory creation fails, TempDir terminates the test by calling Fatal.
func (c *common) TempDir() string {
// Use a single parent directory for all the temporary directories
// created by a test, each numbered sequentially.
var nonExistent bool
if c.tempDir == "" { // Usually the case with js/wasm
nonExistent = true
} else {
_, err := os.Stat(c.tempDir)
nonExistent = errors.Is(err, fs.ErrNotExist)
if err != nil && !nonExistent {
c.Fatalf("TempDir: %v", err)
}
}
if nonExistent {
c.Helper()
// Drop unusual characters (such as path separators or
// characters interacting with globs) from the directory name to
// avoid surprising os.MkdirTemp behavior.
mapper := func(r rune) rune {
if r < utf8.RuneSelf {
const allowed = "!#$%&()+,-.=@^_{}~ "
if '0' <= r && r <= '9' ||
'a' <= r && r <= 'z' ||
'A' <= r && r <= 'Z' {
return r
}
if strings.ContainsRune(allowed, r) {
return r
}
} else if unicode.IsLetter(r) || unicode.IsNumber(r) {
return r
}
return -1
}
pattern := strings.Map(mapper, c.Name())
c.tempDir, c.tempDirErr = os.MkdirTemp("", pattern)
if c.tempDirErr == nil {
c.Cleanup(func() {
if err := os.RemoveAll(c.tempDir); err != nil {
c.Errorf("TempDir RemoveAll cleanup: %v", err)
}
})
}
}
if c.tempDirErr != nil {
c.Fatalf("TempDir: %v", c.tempDirErr)
}
seq := c.tempDirSeq
c.tempDirSeq++
dir := fmt.Sprintf("%s%c%03d", c.tempDir, os.PathSeparator, seq)
if err := os.Mkdir(dir, 0777); err != nil {
c.Fatalf("TempDir: %v", err)
}
return dir
}
// Setenv calls os.Setenv(key, value) and uses Cleanup to
// restore the environment variable to its original value
// after the test.
func (c *common) Setenv(key, value string) {
prevValue, ok := os.LookupEnv(key)
if err := os.Setenv(key, value); err != nil {
c.Fatalf("cannot set environment variable: %v", err)
}
if ok {
c.Cleanup(func() {
os.Setenv(key, prevValue)
})
} else {
c.Cleanup(func() {
os.Unsetenv(key)
})
}
}
// Chdir calls os.Chdir(dir) and uses Cleanup to restore the current
// working directory to its original value after the test. On Unix, it
// also sets PWD environment variable for the duration of the test.
//
// Because Chdir affects the whole process, it cannot be used
// in parallel tests or tests with parallel ancestors.
func (c *common) Chdir(dir string) {
// Note: function copied from the Go 1.24.0 source tree.
oldwd, err := os.Open(".")
if err != nil {
c.Fatal(err)
}
if err := os.Chdir(dir); err != nil {
c.Fatal(err)
}
// On POSIX platforms, PWD represents “an absolute pathname of the
// current working directory.” Since we are changing the working
// directory, we should also set or update PWD to reflect that.
switch runtime.GOOS {
case "windows", "plan9":
// Windows and Plan 9 do not use the PWD variable.
default:
if !filepath.IsAbs(dir) {
dir, err = os.Getwd()
if err != nil {
c.Fatal(err)
}
}
c.Setenv("PWD", dir)
}
c.Cleanup(func() {
err := oldwd.Chdir()
oldwd.Close()
if err != nil {
// It's not safe to continue with tests if we can't
// get back to the original working directory. Since
// we are holding a dirfd, this is highly unlikely.
panic("testing.Chdir: " + err.Error())
}
})
}
// runCleanup is called at the end of the test.
func (c *common) runCleanup() {
for {
var cleanup func()
if len(c.cleanups) > 0 {
last := len(c.cleanups) - 1
cleanup = c.cleanups[last]
c.cleanups = c.cleanups[:last]
}
if cleanup == nil {
return
}
cleanup()
}
}
// Parallel is not implemented, it is only provided for compatibility.
func (t *T) Parallel() {
// Unimplemented.
}
// InternalTest is a reference to a test that should be called during a test suite run.
type InternalTest struct {
Name string
F func(*T)
}
func tRunner(t *T, fn func(t *T)) {
defer func() {
t.runCleanup()
}()
// Run the test.
t.start = time.Now()
fn(t)
t.duration += time.Since(t.start) // TODO: capture cleanup time, too.
t.report() // Report after all subtests have finished.
if t.parent != nil && !t.hasSub {
t.setRan()
}
}
// Run runs f as a subtest of t called name. It waits until the subtest is finished
// and returns whether the subtest succeeded.
func (t *T) Run(name string, f func(t *T)) bool {
t.hasSub = true
testName, ok, _ := t.context.match.fullName(&t.common, name)
if !ok {
return true
}
// Create a subtest.
sub := T{
common: common{
output: &logger{logToStdout: flagVerbose},
name: testName,
parent: &t.common,
level: t.level + 1,
},
context: t.context,
}
if t.level > 0 {
sub.indent = sub.indent + " "
}
if flagVerbose {
fmt.Fprintf(t.output, "=== RUN %s\n", sub.name)
}
tRunner(&sub, f)
return !sub.failed
}
// Deadline reports the time at which the test binary will have
// exceeded the timeout specified by the -timeout flag.
//
// The ok result is false if the -timeout flag indicates “no timeout” (0).
// For now tinygo always return 0, false.
//
// Not Implemented.
func (t *T) Deadline() (deadline time.Time, ok bool) {
deadline = t.context.deadline
return deadline, !deadline.IsZero()
}
// testContext holds all fields that are common to all tests. This includes
// synchronization primitives to run at most *parallel tests.
type testContext struct {
match *matcher
deadline time.Time
}
func newTestContext(m *matcher) *testContext {
return &testContext{
match: m,
}
}
// M is a test suite.
type M struct {
// tests is a list of the test names to execute
Tests []InternalTest
Benchmarks []InternalBenchmark
deps testDeps
// value to pass to os.Exit, the outer test func main
// harness calls os.Exit with this code. See #34129.
exitCode int
}
type testDeps interface {
MatchString(pat, str string) (bool, error)
}
func (m *M) shuffle() error {
var n int64
if flagShuffle == "on" {
n = time.Now().UnixNano()
} else {
var err error
n, err = strconv.ParseInt(flagShuffle, 10, 64)
if err != nil {
m.exitCode = 2
return fmt.Errorf(`testing: -shuffle should be "off", "on", or a valid integer: %v`, err)
}
}
fmt.Println("-test.shuffle", n)
rng := rand.New(rand.NewSource(n))
rng.Shuffle(len(m.Tests), func(i, j int) { m.Tests[i], m.Tests[j] = m.Tests[j], m.Tests[i] })
rng.Shuffle(len(m.Benchmarks), func(i, j int) { m.Benchmarks[i], m.Benchmarks[j] = m.Benchmarks[j], m.Benchmarks[i] })
return nil
}
// Run runs the tests. It returns an exit code to pass to os.Exit.
func (m *M) Run() (code int) {
defer func() {
code = m.exitCode
}()
if !flag.Parsed() {
flag.Parse()
}
if flagShuffle != "off" {
if err := m.shuffle(); err != nil {
fmt.Fprintln(os.Stderr, err)
return
}
}
testRan, testOk := runTests(m.deps.MatchString, m.Tests)
if !testRan && *matchBenchmarks == "" {
fmt.Fprintln(os.Stderr, "testing: warning: no tests to run")
}
if !testOk || !runBenchmarks(m.deps.MatchString, m.Benchmarks) {
fmt.Println("FAIL")
m.exitCode = 1
} else {
fmt.Println("PASS")
m.exitCode = 0
}
return
}
func runTests(matchString func(pat, str string) (bool, error), tests []InternalTest) (ran, ok bool) {
ok = true
ctx := newTestContext(newMatcher(matchString, flagRunRegexp, "-test.run", flagSkipRegexp))
t := &T{
common: common{
output: &logger{logToStdout: flagVerbose},
},
context: ctx,
}
for i := 0; i < flagCount; i++ {
tRunner(t, func(t *T) {
for _, test := range tests {
t.Run(test.Name, test.F)
ok = ok && !t.Failed()
}
})
}
return t.ran, ok
}
func (t *T) report() {
dstr := fmtDuration(t.duration)
format := t.indent + "--- %s: %s (%s)\n"
if t.Failed() {
if t.parent != nil {
t.parent.failed = true
}
t.flushToParent(t.name, format, "FAIL", t.name, dstr)
} else if flagVerbose {
if t.Skipped() {
t.flushToParent(t.name, format, "SKIP", t.name, dstr)
} else {
t.flushToParent(t.name, format, "PASS", t.name, dstr)
}
}
}
// AllocsPerRun returns the average number of allocations during calls to f.
// Although the return value has type float64, it will always be an integral
// value.
//
// Not implemented.
func AllocsPerRun(runs int, f func()) (avg float64) {
f()
for i := 0; i < runs; i++ {
f()
}
return 0
}
type InternalExample struct {
Name string
F func()
Output string
Unordered bool
}
// MainStart is meant for use by tests generated by 'go test'.
// It is not meant to be called directly and is not subject to the Go 1 compatibility document.
// It may change signature from release to release.
func MainStart(deps interface{}, tests []InternalTest, benchmarks []InternalBenchmark, fuzzTargets []InternalFuzzTarget, examples []InternalExample) *M {
Init()
return &M{
Tests: tests,
Benchmarks: benchmarks,
deps: deps.(testDeps),
}
}
// A fake regexp matcher.
// Inflexible, but saves 50KB of flash and 50KB of RAM per -size full,
// and lets tests pass on cortex-m.
func fakeMatchString(pat, str string) (bool, error) {
if pat == ".*" {
return true, nil
}
matched := strings.Contains(str, pat)
return matched, nil
}
-204
View File
@@ -1,204 +0,0 @@
//go:build !windows
// TODO: implement readdir for windows, then enable this file
// Copyright 2014 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package testing_test
import (
"errors"
"io/fs"
"os"
"path/filepath"
"runtime"
"testing"
)
// This is exactly what a test would do without a TestMain.
// It's here only so that there is at least one package in the
// standard library with a TestMain, so that code is executed.
func TestMain(m *testing.M) {
os.Exit(m.Run())
}
func TestTempDirInCleanup(t *testing.T) {
if runtime.GOOS == "wasip1" || runtime.GOOS == "wasip2" {
t.Log("Skipping. TODO: implement RemoveAll for wasi")
return
}
var dir string
t.Run("test", func(t *testing.T) {
t.Cleanup(func() {
dir = t.TempDir()
})
_ = t.TempDir()
})
fi, err := os.Stat(dir)
if fi != nil {
t.Fatalf("Directory %q from user Cleanup still exists", dir)
}
if !errors.Is(err, fs.ErrNotExist) {
t.Fatalf("Unexpected error: %v", err)
}
}
func TestTempDirInBenchmark(t *testing.T) {
testing.Benchmark(func(b *testing.B) {
if !b.Run("test", func(b *testing.B) {
// Add a loop so that the test won't fail. See issue 38677.
for i := 0; i < b.N; i++ {
_ = b.TempDir()
}
}) {
t.Fatal("Sub test failure in a benchmark")
}
})
}
func TestTempDir(t *testing.T) {
if runtime.GOOS == "wasip1" || runtime.GOOS == "wasip2" {
t.Log("Skipping. TODO: implement RemoveAll for wasi")
return
}
testTempDir(t)
t.Run("InSubtest", testTempDir)
t.Run("test/subtest", testTempDir)
t.Run("test\\subtest", testTempDir)
t.Run("test:subtest", testTempDir)
t.Run("test/..", testTempDir)
t.Run("../test", testTempDir)
t.Run("test[]", testTempDir)
t.Run("test*", testTempDir)
t.Run("äöüéè", testTempDir)
}
func testTempDir(t *testing.T) {
dirCh := make(chan string, 1)
t.Cleanup(func() {
// Verify directory has been removed.
select {
case dir := <-dirCh:
fi, err := os.Stat(dir)
if errors.Is(err, fs.ErrNotExist) {
// All good
return
}
if err != nil {
t.Fatal(err)
}
t.Errorf("directory %q still exists: %v, isDir=%v", dir, fi, fi.IsDir())
default:
if !t.Failed() {
t.Fatal("never received dir channel")
}
}
})
dir := t.TempDir()
if dir == "" {
t.Fatal("expected dir")
}
dir2 := t.TempDir()
if dir == dir2 {
t.Fatal("subsequent calls to TempDir returned the same directory")
}
if filepath.Dir(dir) != filepath.Dir(dir2) {
t.Fatalf("calls to TempDir do not share a parent; got %q, %q", dir, dir2)
}
dirCh <- dir
fi, err := os.Stat(dir)
if err != nil {
t.Fatal(err)
}
if !fi.IsDir() {
t.Errorf("dir %q is not a dir", dir)
}
files, err := os.ReadDir(dir)
if err != nil {
t.Fatal(err)
}
if len(files) > 0 {
t.Errorf("unexpected %d files in TempDir: %v", len(files), files)
}
glob := filepath.Join(dir, "*.txt")
if _, err := filepath.Glob(glob); err != nil {
t.Error(err)
}
err = os.Remove(dir)
if err != nil {
t.Errorf("unexpected files in TempDir")
}
}
func TestSetenv(t *testing.T) {
tests := []struct {
name string
key string
initialValueExists bool
initialValue string
newValue string
}{
{
name: "initial value exists",
key: "GO_TEST_KEY_1",
initialValueExists: true,
initialValue: "111",
newValue: "222",
},
{
name: "initial value exists but empty",
key: "GO_TEST_KEY_2",
initialValueExists: true,
initialValue: "",
newValue: "222",
},
{
name: "initial value is not exists",
key: "GO_TEST_KEY_3",
initialValueExists: false,
initialValue: "",
newValue: "222",
},
}
for _, test := range tests {
if test.initialValueExists {
if err := os.Setenv(test.key, test.initialValue); err != nil {
t.Fatalf("unable to set env: got %v", err)
}
} else {
os.Unsetenv(test.key)
}
t.Run(test.name, func(t *testing.T) {
t.Setenv(test.key, test.newValue)
if os.Getenv(test.key) != test.newValue {
t.Fatalf("unexpected value after t.Setenv: got %s, want %s", os.Getenv(test.key), test.newValue)
}
})
got, exists := os.LookupEnv(test.key)
if got != test.initialValue {
t.Fatalf("unexpected value after t.Setenv cleanup: got %s, want %s", got, test.initialValue)
}
if exists != test.initialValueExists {
t.Fatalf("unexpected value after t.Setenv cleanup: got %t, want %t", exists, test.initialValueExists)
}
}
}
func TestTesting(t *testing.T) {
if !testing.Testing() {
t.Error("Expected testing.Testing() to return true while in a test")
}
}
+1 -1
View File
@@ -1,6 +1,6 @@
{
"inherits": ["riscv32"],
"features": "+32bit,+c,+m,+zmmul,-a,-b,-d,-e,-experimental-smmpm,-experimental-smnpm,-experimental-ssnpm,-experimental-sspm,-experimental-ssqosid,-experimental-supm,-experimental-zacas,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-f,-h,-relax,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smepmp,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"features": "+32bit,+c,+m,+zmmul,-a,-b,-d,-e,-experimental-sdext,-experimental-sdtrig,-experimental-smctr,-experimental-ssctr,-experimental-svukte,-experimental-xqcia,-experimental-xqciac,-experimental-xqcicli,-experimental-xqcicm,-experimental-xqcics,-experimental-xqcicsr,-experimental-xqciint,-experimental-xqcilo,-experimental-xqcilsm,-experimental-xqcisls,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-experimental-zvbc32e,-experimental-zvkgs,-f,-h,-relax,-sha,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smdbltrp,-smepmp,-smmpm,-smnpm,-smrnmi,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssdbltrp,-ssnpm,-sspm,-ssqosid,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-supm,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-svvptc,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xmipscmove,-xmipslsp,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zacas,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"build-tags": ["esp32c3", "esp"],
"serial": "usb",
"rtlib": "compiler-rt",
+1 -1
View File
@@ -1,6 +1,6 @@
{
"inherits": ["riscv32"],
"cpu": "sifive-e31",
"features": "+32bit,+a,+c,+m,+zmmul,-b,-d,-e,-experimental-smmpm,-experimental-smnpm,-experimental-ssnpm,-experimental-sspm,-experimental-ssqosid,-experimental-supm,-experimental-zacas,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-f,-h,-relax,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smepmp,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"features": "+32bit,+a,+c,+m,+zaamo,+zalrsc,+zmmul,-b,-d,-e,-experimental-sdext,-experimental-sdtrig,-experimental-smctr,-experimental-ssctr,-experimental-svukte,-experimental-xqcia,-experimental-xqciac,-experimental-xqcicli,-experimental-xqcicm,-experimental-xqcics,-experimental-xqcicsr,-experimental-xqciint,-experimental-xqcilo,-experimental-xqcilsm,-experimental-xqcisls,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-experimental-zvbc32e,-experimental-zvkgs,-f,-h,-relax,-sha,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smdbltrp,-smepmp,-smmpm,-smnpm,-smrnmi,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssdbltrp,-ssnpm,-sspm,-ssqosid,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-supm,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-svvptc,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xmipscmove,-xmipslsp,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zabha,-zacas,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"build-tags": ["fe310", "sifive"]
}
+10
View File
@@ -0,0 +1,10 @@
{
"inherits": ["attiny85"],
"build-tags": ["gopher_arcade"],
"ldflags": [
"--defsym=_bootloader_size=2180",
"--defsym=_stack_size=128"
],
"flash-command": "avrdude -c usbasp -p t85 -B 10 -U flash:w:{hex}:i",
"emulator": "simavr -m attiny85 -f 16000000 {}"
}
+1 -1
View File
@@ -1,6 +1,6 @@
{
"inherits": ["riscv64"],
"features": "+64bit,+a,+c,+d,+f,+m,+zicsr,+zifencei,+zmmul,-b,-e,-experimental-smmpm,-experimental-smnpm,-experimental-ssnpm,-experimental-sspm,-experimental-ssqosid,-experimental-supm,-experimental-zacas,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-h,-relax,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smepmp,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"features": "+64bit,+a,+c,+d,+f,+m,+zaamo,+zalrsc,+zicsr,+zifencei,+zmmul,-b,-e,-experimental-sdext,-experimental-sdtrig,-experimental-smctr,-experimental-ssctr,-experimental-svukte,-experimental-xqcia,-experimental-xqciac,-experimental-xqcicli,-experimental-xqcicm,-experimental-xqcics,-experimental-xqcicsr,-experimental-xqciint,-experimental-xqcilo,-experimental-xqcilsm,-experimental-xqcisls,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-experimental-zvbc32e,-experimental-zvkgs,-h,-relax,-sha,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smdbltrp,-smepmp,-smmpm,-smnpm,-smrnmi,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssdbltrp,-ssnpm,-sspm,-ssqosid,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-supm,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-svvptc,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xmipscmove,-xmipslsp,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zabha,-zacas,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"build-tags": ["k210", "kendryte"],
"code-model": "medium"
}
+2 -2
View File
@@ -2,13 +2,13 @@
"inherits": [
"riscv32"
],
"features": "+32bit,+a,+c,+m,+zihintpause,+zmmul,-b,-d,-e,-experimental-smmpm,-experimental-smnpm,-experimental-ssnpm,-experimental-sspm,-experimental-ssqosid,-experimental-supm,-experimental-zacas,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-f,-h,-relax,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smepmp,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"features": "+32bit,+a,+c,+m,+zaamo,+zalrsc,+zihintpause,+zmmul,-b,-d,-e,-experimental-sdext,-experimental-sdtrig,-experimental-smctr,-experimental-ssctr,-experimental-svukte,-experimental-xqcia,-experimental-xqciac,-experimental-xqcicli,-experimental-xqcicm,-experimental-xqcics,-experimental-xqcicsr,-experimental-xqciint,-experimental-xqcilo,-experimental-xqcilsm,-experimental-xqcisls,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-experimental-zvbc32e,-experimental-zvkgs,-f,-h,-relax,-sha,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smdbltrp,-smepmp,-smmpm,-smnpm,-smrnmi,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssdbltrp,-ssnpm,-sspm,-ssqosid,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-supm,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-svvptc,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xmipscmove,-xmipslsp,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zabha,-zacas,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"build-tags": [
"virt",
"qemu"
],
"scheduler": "cores",
"default-stack-size": 8192,
"default-stack-size": 16384,
"cflags": [
"-march=rv32imaczihintpause",
"-DTINYGO_CORES=4"
+2 -1
View File
@@ -10,7 +10,8 @@
"-march=rv32imac"
],
"ldflags": [
"-melf32lriscv"
"-melf32lriscv",
"-mllvm", "-enable-machine-outliner=never"
],
"gdb": [
"gdb-multiarch",
+1 -1
View File
@@ -1,7 +1,7 @@
{
"inherits": ["riscv32"],
"build-tags": ["tkey"],
"features": "+32bit,+c,+zmmul,-a,-b,-d,-e,-experimental-smmpm,-experimental-smnpm,-experimental-ssnpm,-experimental-sspm,-experimental-ssqosid,-experimental-supm,-experimental-zacas,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-f,-h,-m,-relax,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smepmp,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"features": "+32bit,+c,+zmmul,-a,-b,-d,-e,-experimental-sdext,-experimental-sdtrig,-experimental-smctr,-experimental-ssctr,-experimental-svukte,-experimental-xqcia,-experimental-xqciac,-experimental-xqcicli,-experimental-xqcicm,-experimental-xqcics,-experimental-xqcicsr,-experimental-xqciint,-experimental-xqcilo,-experimental-xqcilsm,-experimental-xqcisls,-experimental-zalasr,-experimental-zicfilp,-experimental-zicfiss,-experimental-zvbc32e,-experimental-zvkgs,-f,-h,-m,-relax,-sha,-shcounterenw,-shgatpa,-shtvala,-shvsatpa,-shvstvala,-shvstvecd,-smaia,-smcdeleg,-smcsrind,-smdbltrp,-smepmp,-smmpm,-smnpm,-smrnmi,-smstateen,-ssaia,-ssccfg,-ssccptr,-sscofpmf,-sscounterenw,-sscsrind,-ssdbltrp,-ssnpm,-sspm,-ssqosid,-ssstateen,-ssstrict,-sstc,-sstvala,-sstvecd,-ssu64xl,-supm,-svade,-svadu,-svbare,-svinval,-svnapot,-svpbmt,-svvptc,-v,-xcvalu,-xcvbi,-xcvbitmanip,-xcvelw,-xcvmac,-xcvmem,-xcvsimd,-xesppie,-xmipscmove,-xmipslsp,-xsfcease,-xsfvcp,-xsfvfnrclipxfqf,-xsfvfwmaccqqq,-xsfvqmaccdod,-xsfvqmaccqoq,-xsifivecdiscarddlone,-xsifivecflushdlone,-xtheadba,-xtheadbb,-xtheadbs,-xtheadcmo,-xtheadcondmov,-xtheadfmemidx,-xtheadmac,-xtheadmemidx,-xtheadmempair,-xtheadsync,-xtheadvdot,-xventanacondops,-xwchc,-za128rs,-za64rs,-zaamo,-zabha,-zacas,-zalrsc,-zama16b,-zawrs,-zba,-zbb,-zbc,-zbkb,-zbkc,-zbkx,-zbs,-zca,-zcb,-zcd,-zce,-zcf,-zcmop,-zcmp,-zcmt,-zdinx,-zfa,-zfbfmin,-zfh,-zfhmin,-zfinx,-zhinx,-zhinxmin,-zic64b,-zicbom,-zicbop,-zicboz,-ziccamoa,-ziccif,-zicclsm,-ziccrse,-zicntr,-zicond,-zicsr,-zifencei,-zihintntl,-zihintpause,-zihpm,-zimop,-zk,-zkn,-zknd,-zkne,-zknh,-zkr,-zks,-zksed,-zksh,-zkt,-ztso,-zvbb,-zvbc,-zve32f,-zve32x,-zve64d,-zve64f,-zve64x,-zvfbfmin,-zvfbfwma,-zvfh,-zvfhmin,-zvkb,-zvkg,-zvkn,-zvknc,-zvkned,-zvkng,-zvknha,-zvknhb,-zvks,-zvksc,-zvksed,-zvksg,-zvksh,-zvkt,-zvl1024b,-zvl128b,-zvl16384b,-zvl2048b,-zvl256b,-zvl32768b,-zvl32b,-zvl4096b,-zvl512b,-zvl64b,-zvl65536b,-zvl8192b",
"cflags": [
"-march=rv32iczmmul"
],
+1 -1
View File
@@ -1,7 +1,7 @@
{
"llvm-target": "wasm32-unknown-wasi",
"cpu": "generic",
"features": "+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"features": "+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"build-tags": ["tinygo.wasm"],
"goos": "wasip1",
"goarch": "wasm",
+1 -1
View File
@@ -1,7 +1,7 @@
{
"llvm-target": "wasm32-unknown-wasi",
"cpu": "generic",
"features": "+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"features": "+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"build-tags": ["tinygo.wasm", "wasip2"],
"buildmode": "c-shared",
"goos": "linux",
+3 -2
View File
@@ -1,7 +1,7 @@
{
"llvm-target": "wasm32-unknown-unknown",
"cpu": "generic",
"features": "+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"cpu": "mvp",
"features": "+nontrapping-fptoint,+sign-ext,-bulk-memory,-multivalue,-reference-types",
"build-tags": ["tinygo.wasm", "wasm_unknown"],
"buildmode": "c-shared",
"goos": "linux",
@@ -14,6 +14,7 @@
"default-stack-size": 4096,
"cflags": [
"-mnontrapping-fptoint",
"-mno-bulk-memory",
"-mno-multivalue",
"-mno-reference-types",
"-msign-ext"
+1 -1
View File
@@ -1,7 +1,7 @@
{
"llvm-target": "wasm32-unknown-wasi",
"cpu": "generic",
"features": "+bulk-memory,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"features": "+bulk-memory,+bulk-memory-opt,+call-indirect-overlong,+mutable-globals,+nontrapping-fptoint,+sign-ext,-multivalue,-reference-types",
"build-tags": ["tinygo.wasm"],
"goos": "js",
"goarch": "wasm",
+9
View File
@@ -4,6 +4,8 @@ package os_smoke_test
// Intended to catch build tag mistakes affecting bare metal targets.
import (
"crypto/rand"
"crypto/rsa"
"fmt"
"path/filepath"
"testing"
@@ -25,3 +27,10 @@ func TestFmt(t *testing.T) {
t.Errorf("printf returned %d, expected 14", n)
}
}
// Regression test for https://github.com/tinygo-org/tinygo/issues/4921
func TestRand(t *testing.T) {
if _, err := rsa.GenerateKey(rand.Reader, 2048); err != nil {
t.Error(err)
}
}
+17
View File
@@ -0,0 +1,17 @@
module github.com/tinygo-org/tinygo/tests/wasm
go 1.24
require (
github.com/chromedp/cdproto v0.0.0-20250803210736-d308e07a266d
github.com/chromedp/chromedp v0.14.1
)
require (
github.com/chromedp/sysutil v1.1.0 // indirect
github.com/go-json-experiment/json v0.0.0-20250725192818-e39067aee2d2 // indirect
github.com/gobwas/httphead v0.1.0 // indirect
github.com/gobwas/pool v0.2.1 // indirect
github.com/gobwas/ws v1.4.0 // indirect
golang.org/x/sys v0.34.0 // indirect
)
+21
View File
@@ -0,0 +1,21 @@
github.com/chromedp/cdproto v0.0.0-20250803210736-d308e07a266d h1:ZtA1sedVbEW7EW80Iz2GR3Ye6PwbJAJXjv7D74xG6HU=
github.com/chromedp/cdproto v0.0.0-20250803210736-d308e07a266d/go.mod h1:NItd7aLkcfOA/dcMXvl8p1u+lQqioRMq/SqDp71Pb/k=
github.com/chromedp/chromedp v0.14.1 h1:0uAbnxewy/Q+Bg7oafVePE/6EXEho9hnaC38f+TTENg=
github.com/chromedp/chromedp v0.14.1/go.mod h1:rHzAv60xDE7VNy/MYtTUrYreSc0ujt2O1/C3bzctYBo=
github.com/chromedp/sysutil v1.1.0 h1:PUFNv5EcprjqXZD9nJb9b/c9ibAbxiYo4exNWZyipwM=
github.com/chromedp/sysutil v1.1.0/go.mod h1:WiThHUdltqCNKGc4gaU50XgYjwjYIhKWoHGPTUfWTJ8=
github.com/go-json-experiment/json v0.0.0-20250725192818-e39067aee2d2 h1:iizUGZ9pEquQS5jTGkh4AqeeHCMbfbjeb0zMt0aEFzs=
github.com/go-json-experiment/json v0.0.0-20250725192818-e39067aee2d2/go.mod h1:TiCD2a1pcmjd7YnhGH0f/zKNcCD06B029pHhzV23c2M=
github.com/gobwas/httphead v0.1.0 h1:exrUm0f4YX0L7EBwZHuCF4GDp8aJfVeBrlLQrs6NqWU=
github.com/gobwas/httphead v0.1.0/go.mod h1:O/RXo79gxV8G+RqlR/otEwx4Q36zl9rqC5u12GKvMCM=
github.com/gobwas/pool v0.2.1 h1:xfeeEhW7pwmX8nuLVlqbzVc7udMDrwetjEv+TZIz1og=
github.com/gobwas/pool v0.2.1/go.mod h1:q8bcK0KcYlCgd9e7WYLm9LpyS+YeLd8JVDW6WezmKEw=
github.com/gobwas/ws v1.4.0 h1:CTaoG1tojrh4ucGPcoJFiAQUAsEWekEWvLy7GsVNqGs=
github.com/gobwas/ws v1.4.0/go.mod h1:G3gNqMNtPppf5XUz7O4shetPpcZ1VJ7zt18dlUeakrc=
github.com/ledongthuc/pdf v0.0.0-20220302134840-0c2507a12d80 h1:6Yzfa6GP0rIo/kULo2bwGEkFvCePZ3qHDDTC3/J9Swo=
github.com/ledongthuc/pdf v0.0.0-20220302134840-0c2507a12d80/go.mod h1:imJHygn/1yfhB7XSJJKlFZKl/J+dCPAknuiaGOshXAs=
github.com/orisano/pixelmatch v0.0.0-20220722002657-fb0b55479cde h1:x0TT0RDC7UhAVbbWWBzr41ElhJx5tXPWkIHA2HWPRuw=
github.com/orisano/pixelmatch v0.0.0-20220722002657-fb0b55479cde/go.mod h1:nZgzbfBr3hhjoZnS66nKrHmduYNpc34ny7RK4z5/HM0=
golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
golang.org/x/sys v0.34.0 h1:H5Y5sJ2L2JRdyv7ROF1he/lPdvFsd0mJHFw2ThKHxLA=
golang.org/x/sys v0.34.0/go.mod h1:BJP2sWEmIv4KK5OTEluFJCKSidICx8ciO85XgH3Ak8k=
+2
View File
@@ -43,6 +43,7 @@ func chromectx(t *testing.T) context.Context {
chromedp.Flag("disable-default-apps", true),
chromedp.NoFirstRun,
chromedp.Headless,
chromedp.WSURLReadTimeout(45*time.Second),
)
allocCtx, cancel := chromedp.NewExecAllocator(context.Background(), opts...)
@@ -81,6 +82,7 @@ func startServer(t *testing.T) (string, *httptest.Server) {
<head>
<title>Test</title>
<meta charset="utf-8"/>
<link rel="icon" href="data:,">
</head>
<body>
<div id="main"></div>