main: version 0.6.0

This should fix compatibility with the Go 1.12 stdlib:
https://github.com/tinygo-org/tinygo/issues/368

.circleci/config.yml

@@ -40,67 +40,36 @@ commands:
             sudo tar -C /usr/local -xf node-v10.15.1-linux-x64.tar.xz
             sudo ln -s /usr/local/node-v10.15.1-linux-x64/bin/node /usr/bin/node
             rm node-v10.15.1-linux-x64.tar.xz
-  dep:
-    steps:
-      - run:
-          name: "Install Go dependencies"
-          command: |
-            curl https://raw.githubusercontent.com/golang/dep/master/install.sh | sh
-            dep ensure --vendor-only
   llvm-source-linux:
     steps:
       - restore_cache:
           keys:
-            - llvm-source-8-v2
+            - llvm-source-8-v3
       - run:
           name: "Fetch LLVM source"
           command: make llvm-source
       - save_cache:
-          key: llvm-source-8-v2
+          key: llvm-source-8-v3
           paths:
             - llvm
   smoketest:
     steps:
-      - smoketest-no-avr
+      - run: make smoketest
-      - run: tinygo build -size short -o test.elf -target=arduino             examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=digispark           examples/blinky1
   smoketest-no-avr:
     steps:
-      - run: tinygo build -size short -o test.elf -target=pca10040            examples/blinky1
+      - run: make smoketest-no-avr
-      - run: tinygo build -size short -o test.elf -target=pca10040            examples/blinky2
-      - run: tinygo build             -o blinky2                              examples/blinky2 # TODO: re-enable -size flag with MachO support
-      - run: tinygo build -size short -o test.elf -target=pca10040            examples/test
-      - run: tinygo build -size short -o test.elf -target=microbit            examples/echo
-      - run: tinygo build -size short -o test.elf -target=nrf52840-mdk        examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=pca10031            examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=bluepill            examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=reelboard           examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=reelboard           examples/blinky2
-      - run: tinygo build -size short -o test.elf -target=pca10056            examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=pca10056            examples/blinky2
-      - run: tinygo build -size short -o test.elf -target=itsybitsy-m0        examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=circuitplay-express examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=stm32f4disco        examples/blinky1
-      - run: tinygo build -size short -o test.elf -target=stm32f4disco        examples/blinky2
-      - run: tinygo build -size short -o test.elf -target=circuitplay-express examples/i2s
-      - run: tinygo build             -o wasm.wasm -target=wasm               examples/wasm/export
-      - run: tinygo build             -o wasm.wasm -target=wasm               examples/wasm/main
   test-linux:
-    parameters:
-      llvm:
-        type: string
     steps:
       - checkout
       - submodules
       - apt-dependencies:
-          llvm: <<parameters.llvm>>
+          llvm: "-8"
       - install-node
       - restore_cache:
           keys:
             - go-cache-{{ checksum "Gopkg.lock" }}-{{ .Environment.CIRCLE_PREVIOUS_BUILD_NUM }}
             - go-cache-{{ checksum "Gopkg.lock" }}
       - llvm-source-linux
-      - dep
       - run: go install .
       - run: go test -v
       - run: make gen-device -j4
@@ -137,7 +106,7 @@ commands:
       - llvm-source-linux
       - restore_cache:
           keys:
-            - llvm-build-8-linux-v4
+            - llvm-build-8-linux-v5
       - run:
           name: "Build LLVM"
           command: |
@@ -155,7 +124,7 @@ commands:
               make llvm-build
             fi
       - save_cache:
-          key: llvm-build-8-linux-v4
+          key: llvm-build-8-linux-v5
           paths:
             llvm-build
       - run:
@@ -164,7 +133,6 @@ commands:
             ln -s $PWD/llvm-build/bin/clang-8 /go/bin/clang-8
             ln -s $PWD/llvm-build/bin/ld.lld  /go/bin/ld.lld-8
             ln -s $PWD/llvm-build/bin/wasm-ld /go/bin/wasm-ld-8
-      - dep
       - run:
           name: "Test TinyGo"
           command: make test
@@ -195,20 +163,23 @@ commands:
       - run:
           name: "Install dependencies"
           command: |
-            HOMEBREW_NO_AUTO_UPDATE=1 brew install go dep qemu
+            curl https://dl.google.com/go/go1.12.5.darwin-amd64.tar.gz -o go1.12.5.darwin-amd64.tar.gz
+            sudo tar -C /usr/local -xzf go1.12.5.darwin-amd64.tar.gz
+            ln -s /usr/local/go/bin/go /usr/local/bin/go
+            HOMEBREW_NO_AUTO_UPDATE=1 brew install qemu
       - restore_cache:
           keys:
-            - llvm-source-8-macos-v2
+            - llvm-source-8-macos-v3
       - run:
           name: "Fetch LLVM source"
           command: make llvm-source
       - save_cache:
-          key: llvm-source-8-macos-v2
+          key: llvm-source-8-macos-v3
           paths:
             - llvm
       - restore_cache:
           keys:
-            - llvm-build-8-macos-v3
+            - llvm-build-8-macos-v4
       - run:
           name: "Build LLVM"
           command: |
@@ -220,16 +191,13 @@ commands:
               make llvm-build
             fi
       - save_cache:
-          key: llvm-build-8-macos-v3
+          key: llvm-build-8-macos-v4
           paths:
             llvm-build
       - run:
           name: "Create LLVM symlinks"
           command: |
             ln -s $PWD/llvm-build/bin/clang-8 /usr/local/bin/clang-8
-      - run:
-          name: "Install Go dependencies"
-          command: dep ensure --vendor-only
       - run:
           name: "Test TinyGo"
           command: make test
@@ -254,27 +222,21 @@ jobs:
   test-llvm8-go111:
     docker:
       - image: circleci/golang:1.11
-    working_directory: /go/src/github.com/tinygo-org/tinygo
     steps:
-      - test-linux:
+      - test-linux
-          llvm: "-8"
   test-llvm8-go112:
     docker:
       - image: circleci/golang:1.12
-    working_directory: /go/src/github.com/tinygo-org/tinygo
     steps:
-      - test-linux:
+      - test-linux
-          llvm: "-8"
   build-linux:
     docker:
       - image: circleci/golang:1.12
-    working_directory: /go/src/github.com/tinygo-org/tinygo
     steps:
       - build-linux
   build-macos:
     macos:
       xcode: "10.1.0"
-    working_directory: ~/go/src/github.com/tinygo-org/tinygo
     steps:
       - build-macos
 

CHANGELOG.md

@@ -1,3 +1,52 @@
+0.6.0
+---
+* **command line**
+  - some portability improvements
+  - make `$GOROOT` more robust and configurable
+  - check for Clang at the Homebrew install location as fallback
+* **compiler driver**
+  - support multiple variations of LLVM commands, for non-Debian distributions
+* **compiler**
+  - improve code quality in multiple ways
+  - make panic configurable, adding trap on panic
+  - refactor many internal parts of the compiler
+  - print all errors encountered during compilation
+  - implement calling function values of a named type
+  - implement returning values from blocking functions
+  - allow larger-than-int values to be sent across a channel
+  - implement complex arithmetic
+  - improve hashmap support
+  - add debuginfo for function arguments
+  - insert nil checks on stores (increasing code size)
+  - implement volatile operations as compiler builtins
+  - add `//go:inline` pragma
+  - add build tags for the Go stdlib version
+* **cgo**
+  - implement `char`, `enum` and `void*` types
+  - support `#include` for builtin headers
+  - improve typedef/struct/enum support
+  - only include symbols that are necessary, for broader support
+  - mark external function args as `nocapture`
+  - implement support for some `#define` constants
+  - implement support for multiple CGo files in a single package
+- **standard library**
+  - `machine`: remove microbit matrix (moved to drivers repository)
+  - `machine`: refactor pins to use `Pin` type instead of `GPIO`
+  - `runtime`: print more interface types on panic, including `error`
+* **targets**
+  - `arm`: print an error on HardFault (including stack overflows)
+  - `atsamd21`: fix a bug in the ADC peripheral
+  - `atsamd21`: add support for I2S
+  - `feather-m0`: add support for this board
+  - `nrf51`: fix a bug in I2C
+  - `stm32f103xx`: fix a bug in I2C
+  - `syscall`: implement `Exit` on unix
+  - `trinket-m0`: add support for this board
+  - `wasm`: make _main_ example smaller
+  - `wasm`: don't cache wasm file in the server, for ease of debugging
+  - `wasm`: work around bug #41508 that caused a deadlock while linking
+  - `wasm`: add support for `js.FuncOf`
+
 0.5.0
 ---
 - **compiler driver**

Dockerfile

@@ -46,7 +46,7 @@ RUN cd /go/src/github.com/tinygo-org/tinygo/ && \
     apt-get update && \
     apt-get install -y apt-utils python3 make binutils-avr gcc-avr avr-libc && \
     make gen-device-avr && \
-    apt-get remove -y python3 make && \
+    apt-get remove -y python3 && \
     apt-get autoremove -y && \
     apt-get clean
 
@@ -64,7 +64,7 @@ RUN cd /go/src/github.com/tinygo-org/tinygo/ && \
     apt-get update && \
     apt-get install -y apt-utils python3 make clang-8 && \
     make gen-device-nrf && make gen-device-stm32 && \
-    apt-get remove -y python3 make && \
+    apt-get remove -y python3 && \
     apt-get autoremove -y && \
     apt-get clean
 
@@ -79,7 +79,7 @@ RUN cd /go/src/github.com/tinygo-org/tinygo/ && \
     apt-get update && \
     apt-get install -y apt-utils python3 make clang-8 binutils-avr gcc-avr avr-libc && \
     make gen-device && \
-    apt-get remove -y python3 make && \
+    apt-get remove -y python3 && \
     apt-get autoremove -y && \
     apt-get clean
 

Makefile

@@ -84,6 +84,45 @@ build/tinygo:
 test:
 	CGO_CPPFLAGS="$(CGO_CPPFLAGS)" CGO_CXXFLAGS="$(CGO_CXXFLAGS)" CGO_LDFLAGS="$(CGO_LDFLAGS)" go test -v -tags byollvm .
 
+.PHONY: smoketest smoketest-no-avr
+smoketest: smoketest-no-avr
+	tinygo build -size short -o test.elf -target=arduino             examples/blinky1
+	tinygo build -size short -o test.elf -target=digispark           examples/blinky1
+smoketest-no-avr:
+	# test all examples
+	tinygo build -size short -o test.elf -target=pca10040            examples/blinky1
+	tinygo build -size short -o test.elf -target=pca10040            examples/adc
+	tinygo build -size short -o test.elf -target=pca10040            examples/blinkm
+	tinygo build -size short -o test.elf -target=pca10040            examples/blinky2
+	tinygo build -size short -o test.elf -target=pca10040            examples/button
+	tinygo build -size short -o test.elf -target=pca10040            examples/button2
+	tinygo build -size short -o test.elf -target=pca10040            examples/echo
+	tinygo build -size short -o test.elf -target=circuitplay-express examples/i2s
+	tinygo build -size short -o test.elf -target=pca10040            examples/mcp3008
+	tinygo build -size short -o test.elf -target=microbit            examples/microbit-blink
+	tinygo build -size short -o test.elf -target=pca10040            examples/pwm
+	tinygo build -size short -o test.elf -target=pca10040            examples/serial
+	tinygo build -size short -o test.elf -target=pca10040            examples/test
+	# test all targets/boards
+	tinygo build             -o test.elf                             examples/blinky2 # TODO: re-enable -size flag with MachO support
+	tinygo build -size short -o test.elf -target=microbit            examples/echo
+	tinygo build -size short -o test.elf -target=nrf52840-mdk        examples/blinky1
+	tinygo build -size short -o test.elf -target=pca10031            examples/blinky1
+	tinygo build -size short -o test.elf -target=bluepill            examples/blinky1
+	tinygo build -size short -o test.elf -target=reelboard           examples/blinky1
+	tinygo build -size short -o test.elf -target=reelboard           examples/blinky2
+	tinygo build -size short -o test.elf -target=pca10056            examples/blinky1
+	tinygo build -size short -o test.elf -target=pca10056            examples/blinky2
+	tinygo build -size short -o test.elf -target=itsybitsy-m0        examples/blinky1
+	tinygo build -size short -o test.elf -target=feather-m0          examples/blinky1
+	tinygo build -size short -o test.elf -target=trinket-m0          examples/blinky1
+	tinygo build -size short -o test.elf -target=circuitplay-express examples/blinky1
+	tinygo build -size short -o test.elf -target=stm32f4disco        examples/blinky1
+	tinygo build -size short -o test.elf -target=stm32f4disco        examples/blinky2
+	tinygo build -size short -o test.elf -target=circuitplay-express examples/i2s
+	tinygo build             -o wasm.wasm -target=wasm               examples/wasm/export
+	tinygo build             -o wasm.wasm -target=wasm               examples/wasm/main
+
 release: build/tinygo gen-device
 	@mkdir -p build/release/tinygo/bin
 	@mkdir -p build/release/tinygo/lib/clang/include

README.md

@@ -17,8 +17,8 @@ import (
 )
 
 func main() {
-    led := machine.GPIO{machine.LED}
+    led := machine.LED
-    led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+    led.Configure(machine.PinConfig{Mode: machine.PinOutput})
     for {
         led.Low()
         time.Sleep(time.Millisecond * 1000)
@@ -43,13 +43,16 @@ See the [getting started instructions](https://tinygo.org/getting-started/) for
 
 You can compile TinyGo programs for microcontrollers, WebAssembly and Linux.
 
-The following microcontroller boards are currently supported:
+The following 14 microcontroller boards are currently supported:
 
 * [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333)
+* [Adafruit Feather M0](https://www.adafruit.com/product/2772)
 * [Adafruit ItsyBitsy M0](https://www.adafruit.com/product/3727)
+* [Adafruit Trinket M0](https://www.adafruit.com/product/3500)
 * [Arduino Uno](https://store.arduino.cc/arduino-uno-rev3)
-* [BBC:Microbit](https://microbit.org/)
+* [BBC micro:bit](https://microbit.org/)
 * [ST Micro STM32F103XX "Bluepill"](http://wiki.stm32duino.com/index.php?title=Blue_Pill)
+* [ST Micro STM32F407 "Discovery"](https://www.st.com/en/evaluation-tools/stm32f4discovery.html)
 * [Digispark](http://digistump.com/products/1)
 * [Nordic Semiconductor PCA10031](https://www.nordicsemi.com/eng/Products/nRF51-Dongle)
 * [Nordic Semiconductor PCA10040](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52-DK)

cgo/cgo.go

@@ -35,6 +35,7 @@ type cgoPackage struct {
 	globals         map[string]globalInfo
 	typedefs        map[string]*typedefInfo
 	elaboratedTypes map[string]*elaboratedTypeInfo
+	enums           map[string]enumInfo
 }
 
 // constantInfo stores some information about a CGo constant found by libclang
@@ -71,6 +72,12 @@ type elaboratedTypeInfo struct {
 	pos      token.Pos
 }
 
+// enumInfo contains information about an enum in the C.
+type enumInfo struct {
+	typeExpr ast.Expr
+	pos      token.Pos
+}
+
 // globalInfo contains information about a declared global variable in C.
 type globalInfo struct {
 	typeExpr ast.Expr
@@ -140,6 +147,7 @@ func Process(files []*ast.File, dir string, fset *token.FileSet, cflags []string
 		globals:         map[string]globalInfo{},
 		typedefs:        map[string]*typedefInfo{},
 		elaboratedTypes: map[string]*elaboratedTypeInfo{},
+		enums:           map[string]enumInfo{},
 	}
 
 	// Add a new location for the following file.
@@ -243,6 +251,9 @@ func Process(files []*ast.File, dir string, fset *token.FileSet, cflags []string
 	// Add elaborated types for C structs and unions.
 	p.addElaboratedTypes()
 
+	// Add enum types and enum constants for C enums.
+	p.addEnumTypes()
+
 	// Patch the AST to use the declared types and functions.
 	for _, f := range files {
 		astutil.Apply(f, p.walker, nil)
@@ -574,6 +585,54 @@ func (p *cgoPackage) addElaboratedTypes() {
 	p.generated.Decls = append(p.generated.Decls, gen)
 }
 
+// addEnumTypes adds C enums to the AST. For example, the following C code:
+//
+//     enum option {
+//         optionA,
+//         optionB = 5,
+//     };
+//
+// is translated to the following Go code equivalent:
+//
+//     type C.enum_option int32
+//
+// The constants are treated just like macros so are inserted into the AST by
+// addConstDecls.
+// See also: https://en.cppreference.com/w/c/language/enum
+func (p *cgoPackage) addEnumTypes() {
+	if len(p.enums) == 0 {
+		return
+	}
+	gen := &ast.GenDecl{
+		TokPos: token.NoPos,
+		Tok:    token.TYPE,
+	}
+	names := make([]string, 0, len(p.enums))
+	for name := range p.enums {
+		names = append(names, name)
+	}
+	sort.Strings(names)
+	for _, name := range names {
+		typ := p.enums[name]
+		typeName := "C.enum_" + name
+		obj := &ast.Object{
+			Kind: ast.Typ,
+			Name: typeName,
+		}
+		typeSpec := &ast.TypeSpec{
+			Name: &ast.Ident{
+				NamePos: typ.pos,
+				Name:    typeName,
+				Obj:     obj,
+			},
+			Type: typ.typeExpr,
+		}
+		obj.Decl = typeSpec
+		gen.Specs = append(gen.Specs, typeSpec)
+	}
+	p.generated.Decls = append(p.generated.Decls, gen)
+}
+
 // findMissingCGoNames traverses the AST and finds all C.something names. Only
 // these symbols are extracted from the parsed C AST and converted to the Go
 // equivalent.

cgo/libclang.go

@@ -49,9 +49,12 @@ GoCXCursor tinygo_clang_Cursor_getArgument(GoCXCursor c, unsigned i);
 CXSourceLocation tinygo_clang_getCursorLocation(GoCXCursor c);
 CXSourceRange tinygo_clang_getCursorExtent(GoCXCursor c);
 CXTranslationUnit tinygo_clang_Cursor_getTranslationUnit(GoCXCursor c);
+long long tinygo_clang_getEnumConstantDeclValue(GoCXCursor c);
+CXType tinygo_clang_getEnumDeclIntegerType(GoCXCursor c);
 
 int tinygo_clang_globals_visitor(GoCXCursor c, GoCXCursor parent, CXClientData client_data);
 int tinygo_clang_struct_visitor(GoCXCursor c, GoCXCursor parent, CXClientData client_data);
+int tinygo_clang_enum_visitor(GoCXCursor c, GoCXCursor parent, CXClientData client_data);
 */
 import "C"
 
@@ -501,6 +504,8 @@ func (p *cgoPackage) makeASTType(typ C.CXType, pos token.Pos) ast.Expr {
 		switch underlying.kind {
 		case C.CXType_Record:
 			return p.makeASTType(underlying, pos)
+		case C.CXType_Enum:
+			return p.makeASTType(underlying, pos)
 		default:
 			panic("unknown elaborated type")
 		}
@@ -580,11 +585,43 @@ func (p *cgoPackage) makeASTType(typ C.CXType, pos token.Pos) ast.Expr {
 			NamePos: pos,
 			Name:    "C." + cgoName,
 		}
+	case C.CXType_Enum:
+		cursor := C.tinygo_clang_getTypeDeclaration(typ)
+		name := getString(C.tinygo_clang_getCursorSpelling(cursor))
+		underlying := C.tinygo_clang_getEnumDeclIntegerType(cursor)
+		if name == "" {
+			// anonymous enum
+			ref := storedRefs.Put(p)
+			defer storedRefs.Remove(ref)
+			C.tinygo_clang_visitChildren(cursor, C.CXCursorVisitor(C.tinygo_clang_enum_visitor), C.CXClientData(ref))
+			return p.makeASTType(underlying, pos)
+		} else {
+			// named enum
+			if _, ok := p.enums[name]; !ok {
+				ref := storedRefs.Put(p)
+				defer storedRefs.Remove(ref)
+				C.tinygo_clang_visitChildren(cursor, C.CXCursorVisitor(C.tinygo_clang_enum_visitor), C.CXClientData(ref))
+				p.enums[name] = enumInfo{
+					typeExpr: p.makeASTType(underlying, pos),
+					pos:      pos,
+				}
+			}
+			return &ast.Ident{
+				NamePos: pos,
+				Name:    "C.enum_" + name,
+			}
+		}
 	}
 	if typeName == "" {
+		// Report this as an error.
+		spelling := getString(C.clang_getTypeSpelling(typ))
+		p.errors = append(p.errors, scanner.Error{
+			Pos: p.fset.PositionFor(pos, true),
+			Msg: fmt.Sprintf("unknown C type: %v (libclang type kind %d)", spelling, typ.kind),
+		})
 		// Fallback, probably incorrect but at least the error points to an odd
 		// type name.
-		typeName = "C." + getString(C.clang_getTypeSpelling(typ))
+		typeName = "C." + spelling
 	}
 	return &ast.Ident{
 		NamePos: pos,
@@ -622,3 +659,16 @@ func tinygo_clang_struct_visitor(c, parent C.GoCXCursor, client_data C.CXClientD
 	fieldList.List = append(fieldList.List, field)
 	return C.CXChildVisit_Continue
 }
+
+//export tinygo_clang_enum_visitor
+func tinygo_clang_enum_visitor(c, parent C.GoCXCursor, client_data C.CXClientData) C.int {
+	p := storedRefs.Get(unsafe.Pointer(client_data)).(*cgoPackage)
+	name := getString(C.tinygo_clang_getCursorSpelling(c))
+	pos := p.getCursorPosition(c)
+	value := C.tinygo_clang_getEnumConstantDeclValue(c)
+	p.constants[name] = constantInfo{
+		expr: &ast.BasicLit{pos, token.INT, strconv.FormatInt(int64(value), 10)},
+		pos:  pos,
+	}
+	return C.CXChildVisit_Continue
+}

cgo/libclang_stubs.c

@@ -56,3 +56,11 @@ CXSourceRange tinygo_clang_getCursorExtent(CXCursor c) {
 CXTranslationUnit tinygo_clang_Cursor_getTranslationUnit(CXCursor c) {
 	return clang_Cursor_getTranslationUnit(c);
 }
+
+long long tinygo_clang_getEnumConstantDeclValue(CXCursor c) {
+	return clang_getEnumConstantDeclValue(c);
+}
+
+CXType tinygo_clang_getEnumDeclIntegerType(CXCursor c) {
+	return clang_getEnumDeclIntegerType(c);
+}

commands.go

@@ -4,6 +4,7 @@ import (
 	"errors"
 	"os"
 	"os/exec"
+	"runtime"
 	"strings"
 )
 
@@ -15,6 +16,16 @@ var commands = map[string][]string{
 	"wasm-ld": {"wasm-ld-8", "wasm-ld"},
 }
 
+func init() {
+	// Add the path to a Homebrew-installed LLVM 8 for ease of use (no need to
+	// manually set $PATH).
+	if runtime.GOOS == "darwin" {
+		commands["clang"] = append(commands["clang"], "/usr/local/opt/llvm/bin/clang-8")
+		commands["ld.lld"] = append(commands["ld.lld"], "/usr/local/opt/llvm/bin/ld.lld")
+		commands["wasm-ld"] = append(commands["wasm-ld"], "/usr/local/opt/llvm/bin/wasm-ld")
+	}
+}
+
 func execCommand(cmdNames []string, args ...string) error {
 	for _, cmdName := range cmdNames {
 		cmd := exec.Command(cmdName, args...)

compiler/asserts.go

@@ -42,7 +42,7 @@ func (c *Compiler) emitLookupBoundsCheck(frame *Frame, arrayLen, index llvm.Valu
 
 	// Fail: this is a nil pointer, exit with a panic.
 	c.builder.SetInsertPointAtEnd(faultBlock)
-	c.createRuntimeCall("lookuppanic", nil, "")
+	c.createRuntimeCall("lookupPanic", nil, "")
 	c.builder.CreateUnreachable()
 
 	// Ok: this is a valid pointer.
@@ -103,7 +103,7 @@ func (c *Compiler) emitSliceBoundsCheck(frame *Frame, capacity, low, high llvm.V
 
 	// Fail: this is a nil pointer, exit with a panic.
 	c.builder.SetInsertPointAtEnd(faultBlock)
-	c.createRuntimeCall("slicepanic", nil, "")
+	c.createRuntimeCall("slicePanic", nil, "")
 	c.builder.CreateUnreachable()
 
 	// Ok: this is a valid pointer.
@@ -114,6 +114,11 @@ func (c *Compiler) emitSliceBoundsCheck(frame *Frame, capacity, low, high llvm.V
 // has no effect in well-behaved programs, but makes sure no uncaught nil
 // pointer dereferences exist in valid Go code.
 func (c *Compiler) emitNilCheck(frame *Frame, ptr llvm.Value, blockPrefix string) {
+	// Check whether we need to emit this check at all.
+	if !ptr.IsAGlobalValue().IsNil() {
+		return
+	}
+
 	// Check whether this is a nil pointer.
 	faultBlock := c.ctx.AddBasicBlock(frame.fn.LLVMFn, blockPrefix+".nil")
 	nextBlock := c.ctx.AddBasicBlock(frame.fn.LLVMFn, blockPrefix+".next")
@@ -141,7 +146,7 @@ func (c *Compiler) emitNilCheck(frame *Frame, ptr llvm.Value, blockPrefix string
 
 	// Fail: this is a nil pointer, exit with a panic.
 	c.builder.SetInsertPointAtEnd(faultBlock)
-	c.createRuntimeCall("nilpanic", nil, "")
+	c.createRuntimeCall("nilPanic", nil, "")
 	c.builder.CreateUnreachable()
 
 	// Ok: this is a valid pointer.

compiler/channel.go

@@ -23,47 +23,41 @@ func (c *Compiler) emitMakeChan(expr *ssa.MakeChan) (llvm.Value, error) {
 // emitChanSend emits a pseudo chan send operation. It is lowered to the actual
 // channel send operation during goroutine lowering.
 func (c *Compiler) emitChanSend(frame *Frame, instr *ssa.Send) {
-	valueType := c.getLLVMType(instr.X.Type())
 	ch := c.getValue(frame, instr.Chan)
 	chanValue := c.getValue(frame, instr.X)
-	valueSize := llvm.ConstInt(c.uintptrType, c.targetData.TypeAllocSize(chanValue.Type()), false)
-	coroutine := c.createRuntimeCall("getCoroutine", nil, "")
 
 	// store value-to-send
-	c.builder.SetInsertPointBefore(coroutine.InstructionParent().Parent().EntryBasicBlock().FirstInstruction())
+	valueType := c.getLLVMType(instr.X.Type())
-	valueAlloca := c.builder.CreateAlloca(valueType, "chan.value")
+	valueAlloca, valueAllocaCast, valueAllocaSize := c.createTemporaryAlloca(valueType, "chan.value")
-	c.builder.SetInsertPointBefore(coroutine)
-	c.builder.SetInsertPointAtEnd(coroutine.InstructionParent())
 	c.builder.CreateStore(chanValue, valueAlloca)
-	valueAllocaCast := c.builder.CreateBitCast(valueAlloca, c.i8ptrType, "chan.value.i8ptr")
 
 	// Do the send.
+	coroutine := c.createRuntimeCall("getCoroutine", nil, "")
+	valueSize := llvm.ConstInt(c.uintptrType, c.targetData.TypeAllocSize(chanValue.Type()), false)
 	c.createRuntimeCall("chanSend", []llvm.Value{coroutine, ch, valueAllocaCast, valueSize}, "")
 
-	// Make sure CoroSplit includes the alloca in the coroutine frame.
+	// End the lifetime of the alloca.
-	// This is a bit dirty, but it works (at least in LLVM 8).
+	// This also works around a bug in CoroSplit, at least in LLVM 8:
-	valueSizeI64 := llvm.ConstInt(c.ctx.Int64Type(), c.targetData.TypeAllocSize(chanValue.Type()), false)
+	// https://bugs.llvm.org/show_bug.cgi?id=41742
-	c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{valueSizeI64, valueAllocaCast}, "")
+	c.emitLifetimeEnd(valueAllocaCast, valueAllocaSize)
 }
 
 // emitChanRecv emits a pseudo chan receive operation. It is lowered to the
 // actual channel receive operation during goroutine lowering.
 func (c *Compiler) emitChanRecv(frame *Frame, unop *ssa.UnOp) llvm.Value {
 	valueType := c.getLLVMType(unop.X.Type().(*types.Chan).Elem())
-	valueSize := llvm.ConstInt(c.uintptrType, c.targetData.TypeAllocSize(valueType), false)
 	ch := c.getValue(frame, unop.X)
-	coroutine := c.createRuntimeCall("getCoroutine", nil, "")
 
 	// Allocate memory to receive into.
-	c.builder.SetInsertPointBefore(coroutine.InstructionParent().Parent().EntryBasicBlock().FirstInstruction())
+	valueAlloca, valueAllocaCast, valueAllocaSize := c.createTemporaryAlloca(valueType, "chan.value")
-	valueAlloca := c.builder.CreateAlloca(valueType, "chan.value")
-	c.builder.SetInsertPointBefore(coroutine)
-	c.builder.SetInsertPointAtEnd(coroutine.InstructionParent())
-	valueAllocaCast := c.builder.CreateBitCast(valueAlloca, c.i8ptrType, "chan.value.i8ptr")
 
 	// Do the receive.
+	coroutine := c.createRuntimeCall("getCoroutine", nil, "")
+	valueSize := llvm.ConstInt(c.uintptrType, c.targetData.TypeAllocSize(valueType), false)
 	c.createRuntimeCall("chanRecv", []llvm.Value{coroutine, ch, valueAllocaCast, valueSize}, "")
 	received := c.builder.CreateLoad(valueAlloca, "chan.received")
+	c.emitLifetimeEnd(valueAllocaCast, valueAllocaSize)
+
 	if unop.CommaOk {
 		commaOk := c.createRuntimeCall("getTaskPromiseData", []llvm.Value{coroutine}, "chan.commaOk.wide")
 		commaOk = c.builder.CreateTrunc(commaOk, c.ctx.Int1Type(), "chan.commaOk")

compiler/compiler.go

@@ -30,6 +30,7 @@ func init() {
 type Config struct {
 	Triple        string   // LLVM target triple, e.g. x86_64-unknown-linux-gnu (empty string means default)
 	CPU           string   // LLVM CPU name, e.g. atmega328p (empty string means default)
+	Features      []string // LLVM CPU features
 	GOOS          string   //
 	GOARCH        string   //
 	GC            string   // garbage collection strategy
@@ -101,7 +102,11 @@ func NewCompiler(pkgName string, config Config) (*Compiler, error) {
 	if err != nil {
 		return nil, err
 	}
-	c.machine = target.CreateTargetMachine(config.Triple, config.CPU, "", llvm.CodeGenLevelDefault, llvm.RelocStatic, llvm.CodeModelDefault)
+	features := ""
+	if len(config.Features) > 0 {
+		features = strings.Join(config.Features, `,`)
+	}
+	c.machine = target.CreateTargetMachine(config.Triple, config.CPU, features, llvm.CodeGenLevelDefault, llvm.RelocStatic, llvm.CodeModelDefault)
 	c.targetData = c.machine.CreateTargetData()
 
 	c.ctx = llvm.NewContext()
@@ -820,6 +825,9 @@ func (c *Compiler) parseFunc(frame *Frame) {
 	if c.DumpSSA {
 		fmt.Printf("\nfunc %s:\n", frame.fn.Function)
 	}
+	if !frame.fn.LLVMFn.IsDeclaration() {
+		panic("function is already defined: " + frame.fn.LLVMFn.Name())
+	}
 	if !frame.fn.IsExported() {
 		frame.fn.LLVMFn.SetLinkage(llvm.InternalLinkage)
 		frame.fn.LLVMFn.SetUnnamedAddr(true)
@@ -1369,7 +1377,6 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 	switch expr := expr.(type) {
 	case *ssa.Alloc:
 		typ := c.getLLVMType(expr.Type().Underlying().(*types.Pointer).Elem())
-		var buf llvm.Value
 		if expr.Heap {
 			size := c.targetData.TypeAllocSize(typ)
 			// Calculate ^uintptr(0)
@@ -1380,15 +1387,16 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 			}
 			// TODO: escape analysis
 			sizeValue := llvm.ConstInt(c.uintptrType, size, false)
-			buf = c.createRuntimeCall("alloc", []llvm.Value{sizeValue}, expr.Comment)
+			buf := c.createRuntimeCall("alloc", []llvm.Value{sizeValue}, expr.Comment)
 			buf = c.builder.CreateBitCast(buf, llvm.PointerType(typ, 0), "")
+			return buf, nil
 		} else {
-			buf = c.builder.CreateAlloca(typ, expr.Comment)
+			buf := c.createEntryBlockAlloca(typ, expr.Comment)
 			if c.targetData.TypeAllocSize(typ) != 0 {
 				c.builder.CreateStore(c.getZeroValue(typ), buf) // zero-initialize var
 			}
+			return buf, nil
 		}
-		return buf, nil
 	case *ssa.BinOp:
 		x := c.getValue(frame, expr.X)
 		y := c.getValue(frame, expr.Y)
@@ -1451,10 +1459,12 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 			// This could be done directly, but as this is a very infrequent
 			// operation it's much easier to bitcast it through an alloca.
 			resultType := c.getLLVMType(expr.Type())
-			alloca := c.builder.CreateAlloca(value.Type(), "")
+			alloca, allocaPtr, allocaSize := c.createTemporaryAlloca(value.Type(), "union.alloca")
 			c.builder.CreateStore(value, alloca)
-			bitcast := c.builder.CreateBitCast(alloca, llvm.PointerType(resultType, 0), "")
+			bitcast := c.builder.CreateBitCast(alloca, llvm.PointerType(resultType, 0), "union.bitcast")
-			return c.builder.CreateLoad(bitcast, ""), nil
+			result := c.builder.CreateLoad(bitcast, "union.result")
+			c.emitLifetimeEnd(allocaPtr, allocaSize)
+			return result, nil
 		}
 		result := c.builder.CreateExtractValue(value, expr.Field, "")
 		return result, nil
@@ -1494,11 +1504,13 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 
 		// Can't load directly from array (as index is non-constant), so have to
 		// do it using an alloca+gep+load.
-		alloca := c.builder.CreateAlloca(array.Type(), "index.alloca")
+		alloca, allocaPtr, allocaSize := c.createTemporaryAlloca(array.Type(), "index.alloca")
 		c.builder.CreateStore(array, alloca)
 		zero := llvm.ConstInt(c.ctx.Int32Type(), 0, false)
 		ptr := c.builder.CreateInBoundsGEP(alloca, []llvm.Value{zero, index}, "index.gep")
-		return c.builder.CreateLoad(ptr, "index.load"), nil
+		result := c.builder.CreateLoad(ptr, "index.load")
+		c.emitLifetimeEnd(allocaPtr, allocaSize)
+		return result, nil
 	case *ssa.IndexAddr:
 		val := c.getValue(frame, expr.X)
 		index := c.getValue(frame, expr.Index)
@@ -1658,16 +1670,16 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 			llvmKeyType := c.getLLVMType(rangeVal.Type().Underlying().(*types.Map).Key())
 			llvmValueType := c.getLLVMType(rangeVal.Type().Underlying().(*types.Map).Elem())
 
-			mapKeyAlloca := c.builder.CreateAlloca(llvmKeyType, "range.key")
+			mapKeyAlloca, mapKeyPtr, mapKeySize := c.createTemporaryAlloca(llvmKeyType, "range.key")
-			mapKeyPtr := c.builder.CreateBitCast(mapKeyAlloca, c.i8ptrType, "range.keyptr")
+			mapValueAlloca, mapValuePtr, mapValueSize := c.createTemporaryAlloca(llvmValueType, "range.value")
-			mapValueAlloca := c.builder.CreateAlloca(llvmValueType, "range.value")
-			mapValuePtr := c.builder.CreateBitCast(mapValueAlloca, c.i8ptrType, "range.valueptr")
 			ok := c.createRuntimeCall("hashmapNext", []llvm.Value{llvmRangeVal, it, mapKeyPtr, mapValuePtr}, "range.next")
 
 			tuple := llvm.Undef(c.ctx.StructType([]llvm.Type{c.ctx.Int1Type(), llvmKeyType, llvmValueType}, false))
 			tuple = c.builder.CreateInsertValue(tuple, ok, 0, "")
 			tuple = c.builder.CreateInsertValue(tuple, c.builder.CreateLoad(mapKeyAlloca, ""), 1, "")
 			tuple = c.builder.CreateInsertValue(tuple, c.builder.CreateLoad(mapValueAlloca, ""), 2, "")
+			c.emitLifetimeEnd(mapKeyPtr, mapKeySize)
+			c.emitLifetimeEnd(mapValuePtr, mapValueSize)
 			return tuple, nil
 		}
 	case *ssa.Phi:
@@ -1684,7 +1696,7 @@ func (c *Compiler) parseExpr(frame *Frame, expr ssa.Value) (llvm.Value, error) {
 		default:
 			panic("unknown type in range: " + typ.String())
 		}
-		it := c.builder.CreateAlloca(iteratorType, "range.it")
+		it, _, _ := c.createTemporaryAlloca(iteratorType, "range.it")
 		c.builder.CreateStore(c.getZeroValue(iteratorType), it)
 		return it, nil
 	case *ssa.Select:

compiler/func-lowering.go

@@ -154,17 +154,17 @@ func (c *Compiler) LowerFuncValues() {
 				// What we'll do is transform the following:
 				//     rawPtr := runtime.getFuncPtr(fn)
 				//     if func.rawPtr == nil {
-				//         runtime.nilpanic()
+				//         runtime.nilPanic()
 				//     }
 				//     result := func.rawPtr(...args, func.context)
 				// into this:
 				//     if false {
-				//         runtime.nilpanic()
+				//         runtime.nilPanic()
 				//     }
 				//     var result // Phi
 				//     switch fn.id {
 				//     case 0:
-				//         runtime.nilpanic()
+				//         runtime.nilPanic()
 				//     case 1:
 				//         result = call first implementation...
 				//     case 2:
@@ -222,7 +222,7 @@ func (c *Compiler) LowerFuncValues() {
 				// The 0 case, which is actually a nil check.
 				nilBlock := llvm.InsertBasicBlock(nextBlock, "func.nil")
 				c.builder.SetInsertPointAtEnd(nilBlock)
-				c.createRuntimeCall("nilpanic", nil, "")
+				c.createRuntimeCall("nilPanic", nil, "")
 				c.builder.CreateUnreachable()
 				sw.AddCase(llvm.ConstInt(c.uintptrType, 0, false), nilBlock)
 

compiler/goroutine-lowering.go

@@ -389,7 +389,20 @@ func (c *Compiler) markAsyncFunctions() (needsScheduler bool, err error) {
 
 			c.builder.SetInsertPointBefore(inst)
 
-			parentHandle := f.LastParam()
+			var parentHandle llvm.Value
+			if f.Linkage() == llvm.ExternalLinkage {
+				// Exported function.
+				// Note that getTaskPromisePtr will panic if it is called with
+				// a nil pointer, so blocking exported functions that try to
+				// return anything will not work.
+				parentHandle = llvm.ConstPointerNull(c.i8ptrType)
+			} else {
+				parentHandle = f.LastParam()
+				if parentHandle.IsNil() || parentHandle.Name() != "parentHandle" {
+					// sanity check
+					panic("trying to make exported function async")
+				}
+			}
 
 			// Store return values.
 			switch inst.OperandsCount() {
@@ -417,7 +430,7 @@ func (c *Compiler) markAsyncFunctions() (needsScheduler bool, err error) {
 			// behavior somehow (with the unreachable instruction).
 			continuePoint := c.builder.CreateCall(coroSuspendFunc, []llvm.Value{
 				llvm.ConstNull(c.ctx.TokenType()),
-				llvm.ConstInt(c.ctx.Int1Type(), 1, false),
+				llvm.ConstInt(c.ctx.Int1Type(), 0, false),
 			}, "ret")
 			sw := c.builder.CreateSwitch(continuePoint, frame.suspendBlock, 2)
 			sw.AddCase(llvm.ConstInt(c.ctx.Int8Type(), 0, false), frame.unreachableBlock)
@@ -488,7 +501,7 @@ func (c *Compiler) markAsyncFunctions() (needsScheduler bool, err error) {
 		c.builder.SetInsertPointBefore(deadlockCall)
 		continuePoint := c.builder.CreateCall(coroSuspendFunc, []llvm.Value{
 			llvm.ConstNull(c.ctx.TokenType()),
-			llvm.ConstInt(c.ctx.Int1Type(), 1, false), // final suspend
+			llvm.ConstInt(c.ctx.Int1Type(), 0, false),
 		}, "")
 		c.splitBasicBlock(deadlockCall, llvm.NextBasicBlock(c.builder.GetInsertBlock()), "task.wakeup.dead")
 		c.builder.SetInsertPointBefore(deadlockCall)

compiler/llvm.go

@@ -24,23 +24,41 @@ func getUses(value llvm.Value) []llvm.Value {
 
 // createEntryBlockAlloca creates a new alloca in the entry block, even though
 // the IR builder is located elsewhere. It assumes that the insert point is
-// after the last instruction in the current block. Also, it adds lifetime
+// at the end of the current block.
-// information to the IR signalling that the alloca won't be used before this
+func (c *Compiler) createEntryBlockAlloca(t llvm.Type, name string) llvm.Value {
-// point.
+	currentBlock := c.builder.GetInsertBlock()
+	entryBlock := currentBlock.Parent().EntryBasicBlock()
+	if entryBlock.FirstInstruction().IsNil() {
+		c.builder.SetInsertPointAtEnd(entryBlock)
+	} else {
+		c.builder.SetInsertPointBefore(entryBlock.FirstInstruction())
+	}
+	alloca := c.builder.CreateAlloca(t, name)
+	c.builder.SetInsertPointAtEnd(currentBlock)
+	return alloca
+}
+
+// createTemporaryAlloca creates a new alloca in the entry block and adds
+// lifetime start infromation in the IR signalling that the alloca won't be used
+// before this point.
 //
 // This is useful for creating temporary allocas for intrinsics. Don't forget to
-// end the lifetime after you're done with it.
+// end the lifetime using emitLifetimeEnd after you're done with it.
-func (c *Compiler) createEntryBlockAlloca(t llvm.Type, name string) (alloca, bitcast, size llvm.Value) {
+func (c *Compiler) createTemporaryAlloca(t llvm.Type, name string) (alloca, bitcast, size llvm.Value) {
-	currentBlock := c.builder.GetInsertBlock()
+	alloca = c.createEntryBlockAlloca(t, name)
-	c.builder.SetInsertPointBefore(currentBlock.Parent().EntryBasicBlock().FirstInstruction())
-	alloca = c.builder.CreateAlloca(t, name)
-	c.builder.SetInsertPointAtEnd(currentBlock)
 	bitcast = c.builder.CreateBitCast(alloca, c.i8ptrType, name+".bitcast")
 	size = llvm.ConstInt(c.ctx.Int64Type(), c.targetData.TypeAllocSize(t), false)
 	c.builder.CreateCall(c.getLifetimeStartFunc(), []llvm.Value{size, bitcast}, "")
 	return
 }
 
+// emitLifetimeEnd signals the end of an (alloca) lifetime by calling the
+// llvm.lifetime.end intrinsic. It is commonly used together with
+// createTemporaryAlloca.
+func (c *Compiler) emitLifetimeEnd(ptr, size llvm.Value) {
+	c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{size, ptr}, "")
+}
+
 // getLifetimeStartFunc returns the llvm.lifetime.start intrinsic and creates it
 // first if it doesn't exist yet.
 func (c *Compiler) getLifetimeStartFunc() llvm.Value {

compiler/map.go

@@ -15,7 +15,7 @@ func (c *Compiler) emitMapLookup(keyType, valueType types.Type, m, key llvm.Valu
 	// Allocate the memory for the resulting type. Do not zero this memory: it
 	// will be zeroed by the hashmap get implementation if the key is not
 	// present in the map.
-	mapValueAlloca, mapValuePtr, mapValueSize := c.createEntryBlockAlloca(llvmValueType, "hashmap.value")
+	mapValueAlloca, mapValuePtr, mapValueSize := c.createTemporaryAlloca(llvmValueType, "hashmap.value")
 
 	// Do the lookup. How it is done depends on the key type.
 	var commaOkValue llvm.Value
@@ -27,12 +27,12 @@ func (c *Compiler) emitMapLookup(keyType, valueType types.Type, m, key llvm.Valu
 		// key can be compared with runtime.memequal
 		// Store the key in an alloca, in the entry block to avoid dynamic stack
 		// growth.
-		mapKeyAlloca, mapKeyPtr, mapKeySize := c.createEntryBlockAlloca(key.Type(), "hashmap.key")
+		mapKeyAlloca, mapKeyPtr, mapKeySize := c.createTemporaryAlloca(key.Type(), "hashmap.key")
 		c.builder.CreateStore(key, mapKeyAlloca)
 		// Fetch the value from the hashmap.
 		params := []llvm.Value{m, mapKeyPtr, mapValuePtr}
 		commaOkValue = c.createRuntimeCall("hashmapBinaryGet", params, "")
-		c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{mapKeySize, mapKeyPtr}, "")
+		c.emitLifetimeEnd(mapKeyPtr, mapKeySize)
 	} else {
 		// Not trivially comparable using memcmp.
 		return llvm.Value{}, c.makeError(pos, "only strings, bools, ints or structs of bools/ints are supported as map keys, but got: "+keyType.String())
@@ -41,7 +41,7 @@ func (c *Compiler) emitMapLookup(keyType, valueType types.Type, m, key llvm.Valu
 	// Load the resulting value from the hashmap. The value is set to the zero
 	// value if the key doesn't exist in the hashmap.
 	mapValue := c.builder.CreateLoad(mapValueAlloca, "")
-	c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{mapValueSize, mapValuePtr}, "")
+	c.emitLifetimeEnd(mapValuePtr, mapValueSize)
 
 	if commaOk {
 		tuple := llvm.Undef(c.ctx.StructType([]llvm.Type{llvmValueType, c.ctx.Int1Type()}, false))
@@ -54,7 +54,7 @@ func (c *Compiler) emitMapLookup(keyType, valueType types.Type, m, key llvm.Valu
 }
 
 func (c *Compiler) emitMapUpdate(keyType types.Type, m, key, value llvm.Value, pos token.Pos) {
-	valueAlloca, valuePtr, valueSize := c.createEntryBlockAlloca(value.Type(), "hashmap.value")
+	valueAlloca, valuePtr, valueSize := c.createTemporaryAlloca(value.Type(), "hashmap.value")
 	c.builder.CreateStore(value, valueAlloca)
 	keyType = keyType.Underlying()
 	if t, ok := keyType.(*types.Basic); ok && t.Info()&types.IsString != 0 {
@@ -63,15 +63,15 @@ func (c *Compiler) emitMapUpdate(keyType types.Type, m, key, value llvm.Value, p
 		c.createRuntimeCall("hashmapStringSet", params, "")
 	} else if hashmapIsBinaryKey(keyType) {
 		// key can be compared with runtime.memequal
-		keyAlloca, keyPtr, keySize := c.createEntryBlockAlloca(key.Type(), "hashmap.key")
+		keyAlloca, keyPtr, keySize := c.createTemporaryAlloca(key.Type(), "hashmap.key")
 		c.builder.CreateStore(key, keyAlloca)
 		params := []llvm.Value{m, keyPtr, valuePtr}
 		c.createRuntimeCall("hashmapBinarySet", params, "")
-		c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{keySize, keyPtr}, "")
+		c.emitLifetimeEnd(keyPtr, keySize)
 	} else {
 		c.addError(pos, "only strings, bools, ints or structs of bools/ints are supported as map keys, but got: "+keyType.String())
 	}
-	c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{valueSize, valuePtr}, "")
+	c.emitLifetimeEnd(valuePtr, valueSize)
 }
 
 func (c *Compiler) emitMapDelete(keyType types.Type, m, key llvm.Value, pos token.Pos) error {
@@ -82,11 +82,11 @@ func (c *Compiler) emitMapDelete(keyType types.Type, m, key llvm.Value, pos toke
 		c.createRuntimeCall("hashmapStringDelete", params, "")
 		return nil
 	} else if hashmapIsBinaryKey(keyType) {
-		keyAlloca, keyPtr, keySize := c.createEntryBlockAlloca(key.Type(), "hashmap.key")
+		keyAlloca, keyPtr, keySize := c.createTemporaryAlloca(key.Type(), "hashmap.key")
 		c.builder.CreateStore(key, keyAlloca)
 		params := []llvm.Value{m, keyPtr}
 		c.createRuntimeCall("hashmapBinaryDelete", params, "")
-		c.builder.CreateCall(c.getLifetimeEndFunc(), []llvm.Value{keySize, keyPtr}, "")
+		c.emitLifetimeEnd(keyPtr, keySize)
 		return nil
 	} else {
 		return c.makeError(pos, "only strings, bools, ints or structs of bools/ints are supported as map keys, but got: "+keyType.String())

compiler/wordpack.go

@@ -34,7 +34,7 @@ func (c *Compiler) emitPointerPack(values []llvm.Value) llvm.Value {
 		}
 		// Because packedType is a struct and we have to cast it to a *i8, store
 		// it in an alloca first for bitcasting (store+bitcast+load).
-		packedAlloc = c.builder.CreateAlloca(packedType, "")
+		packedAlloc, _, _ = c.createTemporaryAlloca(packedType, "")
 	} else {
 		// Packed data is bigger than a pointer, so allocate it on the heap.
 		sizeValue := llvm.ConstInt(c.uintptrType, size, false)
@@ -54,7 +54,11 @@ func (c *Compiler) emitPointerPack(values []llvm.Value) llvm.Value {
 	if packedHeapAlloc.IsNil() {
 		// Load value (as *i8) from the alloca.
 		packedAlloc = c.builder.CreateBitCast(packedAlloc, llvm.PointerType(c.i8ptrType, 0), "")
-		return c.builder.CreateLoad(packedAlloc, "")
+		result := c.builder.CreateLoad(packedAlloc, "")
+		packedPtr := c.builder.CreateBitCast(packedAlloc, c.i8ptrType, "")
+		packedSize := llvm.ConstInt(c.ctx.Int64Type(), c.targetData.TypeAllocSize(packedAlloc.Type()), false)
+		c.emitLifetimeEnd(packedPtr, packedSize)
+		return result
 	} else {
 		// Get the original heap allocation pointer, which already is an *i8.
 		return packedHeapAlloc
@@ -66,7 +70,7 @@ func (c *Compiler) emitPointerUnpack(ptr llvm.Value, valueTypes []llvm.Type) []l
 	packedType := c.ctx.StructType(valueTypes, false)
 
 	// Get a correctly-typed pointer to the packed data.
-	var packedAlloc llvm.Value
+	var packedAlloc, packedRawAlloc llvm.Value
 	size := c.targetData.TypeAllocSize(packedType)
 	if size == 0 {
 		// No data to unpack.
@@ -80,7 +84,7 @@ func (c *Compiler) emitPointerUnpack(ptr llvm.Value, valueTypes []llvm.Type) []l
 			return []llvm.Value{c.builder.CreatePtrToInt(ptr, valueTypes[0], "unpack.int")}
 		}
 		// Fallback: load it using an alloca.
-		packedRawAlloc := c.builder.CreateAlloca(llvm.PointerType(c.i8ptrType, 0), "unpack.raw.alloc")
+		packedRawAlloc, _, _ = c.createTemporaryAlloca(llvm.PointerType(c.i8ptrType, 0), "unpack.raw.alloc")
 		packedRawValue := c.builder.CreateBitCast(ptr, llvm.PointerType(c.i8ptrType, 0), "unpack.raw.value")
 		c.builder.CreateStore(packedRawValue, packedRawAlloc)
 		packedAlloc = c.builder.CreateBitCast(packedRawAlloc, llvm.PointerType(packedType, 0), "unpack.alloc")
@@ -104,5 +108,10 @@ func (c *Compiler) emitPointerUnpack(ptr llvm.Value, valueTypes []llvm.Type) []l
 		gep := c.builder.CreateInBoundsGEP(packedAlloc, indices, "")
 		values[i] = c.builder.CreateLoad(gep, "")
 	}
+	if !packedRawAlloc.IsNil() {
+		allocPtr := c.builder.CreateBitCast(packedRawAlloc, c.i8ptrType, "")
+		allocSize := llvm.ConstInt(c.ctx.Int64Type(), c.targetData.TypeAllocSize(c.uintptrType), false)
+		c.emitLifetimeEnd(allocPtr, allocSize)
+	}
 	return values
 }

go.mod

@@ -0,0 +1,10 @@
+module github.com/tinygo-org/tinygo
+
+go 1.11
+
+require (
+	github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2
+	github.com/marcinbor85/gohex v0.0.0-20180128172054-7a43cd876e46
+	golang.org/x/tools v0.0.0-20190227180812-8dcc6e70cdef
+	tinygo.org/x/go-llvm v0.0.0-20190224120431-7707ae5d1261
+)

go.sum

@@ -0,0 +1,14 @@
+github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2 h1:oMCHnXa6CCCafdPDbMh/lWRhRByN0VFLvv+g+ayx1SI=
+github.com/blakesmith/ar v0.0.0-20150311145944-8bd4349a67f2/go.mod h1:PkYb9DJNAwrSvRx5DYA+gUcOIgTGVMNkfSCbZM8cWpI=
+github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
+github.com/marcinbor85/gohex v0.0.0-20180128172054-7a43cd876e46 h1:wXG2bA8fO7Vv7lLk2PihFMTqmbT173Tje39oKzQ50Mo=
+github.com/marcinbor85/gohex v0.0.0-20180128172054-7a43cd876e46/go.mod h1:Pb6XcsXyropB9LNHhnqaknG/vEwYztLkQzVCHv8sQ3M=
+golang.org/x/net v0.0.0-20180724234803-3673e40ba225/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/net v0.0.0-20190213061140-3a22650c66bd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/sync v0.0.0-20181108010431-42b317875d0f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
+golang.org/x/tools v0.0.0-20190227180812-8dcc6e70cdef h1:ymc9FeDom3RIEA3coKokSllBB1hRcMT0tZ1W3Jf9Ids=
+golang.org/x/tools v0.0.0-20190227180812-8dcc6e70cdef/go.mod h1:9Yl7xja0Znq3iFh3HoIrodX9oNMXvdceNzlUR8zjMvY=
+google.golang.org/appengine v1.4.0/go.mod h1:xpcJRLb0r/rnEns0DIKYYv+WjYCduHsrkT7/EB5XEv4=
+tinygo.org/x/go-llvm v0.0.0-20190224120431-7707ae5d1261 h1:rJS2Hga39YAnm7DE4qrPm6Dr/67EOojL0XPzvbEeBiw=
+tinygo.org/x/go-llvm v0.0.0-20190224120431-7707ae5d1261/go.mod h1:fv1F0BSNpxMfCL0zF3M4OPFbgYHnhtB6ST0HvUtu/LE=

interp/frame.go

@@ -184,6 +184,25 @@ func (fr *frame) evalBasicBlock(bb, incoming llvm.BasicBlock, indent string) (re
 			lhs := fr.getLocal(inst.Operand(0)).(*LocalValue).Underlying
 			rhs := fr.getLocal(inst.Operand(1)).(*LocalValue).Underlying
 			predicate := inst.IntPredicate()
+			if predicate == llvm.IntEQ && lhs.Type().TypeKind() == llvm.PointerTypeKind {
+				// Unfortunately, the const propagation in the IR builder
+				// doesn't handle pointer compares of inttoptr values. So we
+				// implement it manually here.
+				lhsNil, ok1 := isPointerNil(lhs)
+				rhsNil, ok2 := isPointerNil(rhs)
+				if ok1 && ok2 {
+					if lhsNil && rhsNil {
+						// Both are nil, so this icmp is always evaluated to true.
+						fr.locals[inst] = &LocalValue{fr.Eval, llvm.ConstInt(fr.Mod.Context().Int1Type(), 1, false)}
+						continue
+					}
+					if lhsNil != rhsNil {
+						// Only one of them is nil, so this comparison must return false.
+						fr.locals[inst] = &LocalValue{fr.Eval, llvm.ConstInt(fr.Mod.Context().Int1Type(), 0, false)}
+						continue
+					}
+				}
+			}
 			fr.locals[inst] = &LocalValue{fr.Eval, fr.builder.CreateICmp(predicate, lhs, rhs, "")}
 		case !inst.IsAFCmpInst().IsNil():
 			lhs := fr.getLocal(inst.Operand(0)).(*LocalValue).Underlying
@@ -461,17 +480,21 @@ func (fr *frame) evalBasicBlock(bb, incoming llvm.BasicBlock, indent string) (re
 			}
 			thenBB := inst.Operand(1)
 			elseBB := inst.Operand(2)
-			if !cond.IsConstant() {
+			if !cond.IsAInstruction().IsNil() {
 				return nil, nil, errors.New("interp: branch on a non-constant")
-			} else {
+			}
-				switch cond.ZExtValue() {
+			if !cond.IsAConstantExpr().IsNil() {
-				case 0: // false
+				// This may happen when the instruction builder could not
-					return nil, []llvm.Value{thenBB}, nil // then
+				// const-fold some instructions.
-				case 1: // true
+				return nil, nil, errors.New("interp: branch on a non-const-propagated constant expression")
-					return nil, []llvm.Value{elseBB}, nil // else
+			}
-				default:
+			switch cond {
-					panic("branch was not true or false")
+			case llvm.ConstInt(fr.Mod.Context().Int1Type(), 0, false): // false
-				}
+				return nil, []llvm.Value{thenBB}, nil // then
+			case llvm.ConstInt(fr.Mod.Context().Int1Type(), 1, false): // true
+				return nil, []llvm.Value{elseBB}, nil // else
+			default:
+				panic("branch was not true or false")
 			}
 		case !inst.IsABranchInst().IsNil() && inst.OperandsCount() == 1:
 			// unconditional branch (goto)

interp/scan.go

@@ -109,7 +109,16 @@ func (e *Eval) hasSideEffects(fn llvm.Value) *sideEffectResult {
 				default:
 					panic("unreachable")
 				}
-			case llvm.Load, llvm.Store:
+			case llvm.Load:
+				if inst.IsVolatile() {
+					result.updateSeverity(sideEffectLimited)
+				}
+				if _, ok := e.dirtyGlobals[inst.Operand(0)]; ok {
+					if e.hasLocalSideEffects(dirtyLocals, inst) {
+						result.updateSeverity(sideEffectLimited)
+					}
+				}
+			case llvm.Store:
 				if inst.IsVolatile() {
 					result.updateSeverity(sideEffectLimited)
 				}

interp/utils.go

@@ -94,3 +94,29 @@ func isScalar(t llvm.Type) bool {
 		return false
 	}
 }
+
+// isPointerNil returns whether this is a nil pointer or not. The ok value
+// indicates whether the result is certain: if it is false the result boolean is
+// not valid.
+func isPointerNil(v llvm.Value) (result bool, ok bool) {
+	if !v.IsAConstantExpr().IsNil() {
+		switch v.Opcode() {
+		case llvm.IntToPtr:
+			// Whether a constant inttoptr is nil is easy to
+			// determine.
+			operand := v.Operand(0)
+			if operand.IsConstant() {
+				return operand.ZExtValue() == 0, true
+			}
+		case llvm.BitCast, llvm.GetElementPtr:
+			// These const instructions are just a kind of wrappers for the
+			// underlying pointer.
+			return isPointerNil(v.Operand(0))
+		}
+	}
+	if !v.IsAConstantPointerNull().IsNil() {
+		// A constant pointer null is always null, of course.
+		return true, true
+	}
+	return false, false // not valid
+}

main.go

@@ -80,9 +80,21 @@ func Compile(pkgName, outpath string, spec *TargetSpec, config *BuildConfig, act
 	if goroot == "" {
 		return errors.New("cannot locate $GOROOT, please set it manually")
 	}
+	tags := spec.BuildTags
+	major, minor := getGorootVersion(goroot)
+	if major != 1 {
+		if major == 0 {
+			return errors.New("could not read version from GOROOT: " + goroot)
+		}
+		return fmt.Errorf("expected major version 1, got go%d.%d", major, minor)
+	}
+	for i := 1; i <= minor; i++ {
+		tags = append(tags, fmt.Sprintf("go1.%d", i))
+	}
 	compilerConfig := compiler.Config{
 		Triple:        spec.Triple,
 		CPU:           spec.CPU,
+		Features:      spec.Features,
 		GOOS:          spec.GOOS,
 		GOARCH:        spec.GOARCH,
 		GC:            config.gc,
@@ -94,7 +106,7 @@ func Compile(pkgName, outpath string, spec *TargetSpec, config *BuildConfig, act
 		TINYGOROOT:    root,
 		GOROOT:        goroot,
 		GOPATH:        getGopath(),
-		BuildTags:     spec.BuildTags,
+		BuildTags:     tags,
 	}
 	c, err := compiler.NewCompiler(pkgName, compilerConfig)
 	if err != nil {

src/device/arm/cortexm.s

@@ -0,0 +1,21 @@
+.syntax unified
+
+.section .text.HardFault_Handler
+.global  HardFault_Handler
+.type    HardFault_Handler, %function
+HardFault_Handler:
+    // Put the old stack pointer in the first argument, for easy debugging. This
+    // is especially useful on Cortex-M0, which supports far fewer debug
+    // facilities.
+    mov r0, sp
+
+    // Load the default stack pointer from address 0 so that we can call normal
+    // functions again that expect a working stack. However, it will corrupt the
+    // old stack so the function below must not attempt to recover from this
+    // fault.
+    movs r3, #0
+    ldr r3, [r3]
+    mov sp, r3
+
+    // Continue handling this error in Go.
+    bl handleHardFault

src/examples/adc/adc.go

@@ -11,8 +11,8 @@ import (
 func main() {
 	machine.InitADC()
 
-	led := machine.GPIO{machine.LED}
+	led := machine.LED
-	led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
 	sensor := machine.ADC{machine.ADC2}
 	sensor.Configure()

src/examples/blinky1/blinky1.go

@@ -8,8 +8,8 @@ import (
 )
 
 func main() {
-	led := machine.GPIO{machine.LED}
+	led := machine.LED
-	led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	for {
 		led.Low()
 		time.Sleep(time.Millisecond * 500)

src/examples/blinky2/blinky2.go

@@ -16,8 +16,8 @@ func main() {
 }
 
 func led1() {
-	led := machine.GPIO{machine.LED}
+	led := machine.LED1
-	led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	for {
 		println("+")
 		led.Low()
@@ -30,8 +30,8 @@ func led1() {
 }
 
 func led2() {
-	led := machine.GPIO{machine.LED2}
+	led := machine.LED2
-	led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	for {
 		println("  +")
 		led.Low()

src/examples/button/button.go

@@ -7,14 +7,14 @@ import (
 
 // This example assumes that the button is connected to pin 8. Change the value
 // below to use a different pin.
-const buttonPin = 8
+const (
+	led    = machine.LED
+	button = machine.Pin(8)
+)
 
 func main() {
-	led := machine.GPIO{machine.LED}
+	led.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	led.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	button.Configure(machine.PinConfig{Mode: machine.PinInput})
-
-	button := machine.GPIO{buttonPin}
-	button.Configure(machine.GPIOConfig{Mode: machine.GPIO_INPUT})
 
 	for {
 		if button.Get() {

src/examples/button2/button2.go

@@ -8,29 +8,29 @@ import (
 // This example assumes that you are using the pca10040 board
 
 func main() {
-	led1 := machine.GPIO{machine.LED1}
+	led1 := machine.LED1
-	led1.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led1.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
-	led2 := machine.GPIO{machine.LED2}
+	led2 := machine.LED2
-	led2.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led2.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
-	led3 := machine.GPIO{machine.LED3}
+	led3 := machine.LED3
-	led3.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led3.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
-	led4 := machine.GPIO{machine.LED4}
+	led4 := machine.LED4
-	led4.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	led4.Configure(machine.PinConfig{Mode: machine.PinOutput})
 
-	button1 := machine.GPIO{machine.BUTTON1}
+	button1 := machine.BUTTON1
-	button1.Configure(machine.GPIOConfig{Mode: machine.GPIO_INPUT_PULLUP})
+	button1.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
 
-	button2 := machine.GPIO{machine.BUTTON2}
+	button2 := machine.BUTTON2
-	button2.Configure(machine.GPIOConfig{Mode: machine.GPIO_INPUT_PULLUP})
+	button2.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
 
-	button3 := machine.GPIO{machine.BUTTON3}
+	button3 := machine.BUTTON3
-	button3.Configure(machine.GPIOConfig{Mode: machine.GPIO_INPUT_PULLUP})
+	button3.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
 
-	button4 := machine.GPIO{machine.BUTTON4}
+	button4 := machine.BUTTON4
-	button4.Configure(machine.GPIOConfig{Mode: machine.GPIO_INPUT_PULLUP})
+	button4.Configure(machine.PinConfig{Mode: machine.PinInputPullup})
 
 	for {
 		led1.Set(button1.Get())

src/examples/echo/echo.go

@@ -9,9 +9,9 @@ import (
 
 // change these to test a different UART or pins if available
 var (
-	uart       = machine.UART0
+	uart = machine.UART0
-	tx   uint8 = machine.UART_TX_PIN
+	tx   = machine.UART_TX_PIN
-	rx   uint8 = machine.UART_RX_PIN
+	rx   = machine.UART_RX_PIN
 )
 
 func main() {

src/examples/mcp3008/mcp3008.go

@@ -8,19 +8,17 @@ import (
 	"time"
 )
 
-// CS_PIN is the pin used for Chip Select (CS). Change to whatever is in use on your board.
+// cs is the pin used for Chip Select (CS). Change to whatever is in use on your board.
-const CS_PIN = 3
+const cs = machine.Pin(3)
 
 var (
 	tx          []byte
 	rx          []byte
 	val, result uint16
-	cs          machine.GPIO
 )
 
 func main() {
-	cs = machine.GPIO{CS_PIN}
+	cs.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	cs.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
 
 	machine.SPI0.Configure(machine.SPIConfig{
 		Frequency: 4000000,

src/examples/microbit-blink/microbit-blink.go

@@ -9,10 +9,10 @@ import (
 // The LED matrix in the micro:bit is a multiplexed display: https://en.wikipedia.org/wiki/Multiplexed_display
 // Driver for easier control: https://github.com/tinygo-org/drivers/tree/master/microbitmatrix
 func main() {
-	ledrow := machine.GPIO{machine.LED_ROW_1}
+	ledrow := machine.LED_ROW_1
-	ledrow.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	ledrow.Configure(machine.PinConfig{Mode: machine.PinOutput})
-	ledcol := machine.GPIO{machine.LED_COL_1}
+	ledcol := machine.LED_COL_1
-	ledcol.Configure(machine.GPIOConfig{Mode: machine.GPIO_OUTPUT})
+	ledcol.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	ledcol.Low()
 	for {
 		ledrow.Low()

src/examples/wasm/Makefile

@@ -1,10 +1,15 @@
 export: clean wasm_exec
-	tinygo build -o ./html/wasm.wasm -target wasm ./export/wasm.go
+	tinygo build -o ./html/wasm.wasm -target wasm -no-debug ./export/wasm.go
 	cp ./export/wasm.js ./html/
 	cp ./export/index.html ./html/
 
+callback: clean wasm_exec
+	tinygo build -o ./html/wasm.wasm -target wasm ./callback/wasm.go
+	cp ./callback/wasm.js ./html/
+	cp ./callback/index.html ./html/
+
 main: clean wasm_exec
-	tinygo build -o ./html/wasm.wasm -target wasm ./main/main.go
+	tinygo build -o ./html/wasm.wasm -target wasm -no-debug ./main/main.go
 	cp ./main/index.html ./html/
 
 wasm_exec:

src/examples/wasm/callback/index.html

@@ -0,0 +1,19 @@
+<!DOCTYPE html>
+
+<html>
+
+<head>
+	<meta charset="utf-8" />
+	<title>Go WebAssembly</title>
+	<meta name="viewport" content="width=device-width, initial-scale=1" />
+	<script src="wasm_exec.js" defer></script>
+	<script src="wasm.js" defer></script>
+</head>
+
+<body>
+	<h1>WebAssembly</h1>
+	<p>Add two numbers, using WebAssembly:</p>
+	<input type="number" id="a" value="0" /> + <input type="number" id="b" value="0" /> = <input type="number" id="result" readonly />
+</body>
+
+</html>

src/examples/wasm/callback/wasm.go

@@ -0,0 +1,27 @@
+package main
+
+import (
+	"strconv"
+	"syscall/js"
+)
+
+var a, b int
+
+func main() {
+	document := js.Global().Get("document")
+	document.Call("getElementById", "a").Set("oninput", updater(&a))
+	document.Call("getElementById", "b").Set("oninput", updater(&b))
+	update()
+}
+
+func updater(n *int) js.Func {
+	return js.FuncOf(func(this js.Value, args []js.Value) interface{} {
+		*n, _ = strconv.Atoi(this.Get("value").String())
+		update()
+		return nil
+	})
+}
+
+func update() {
+	js.Global().Get("document").Call("getElementById", "result").Set("value", a+b)
+}

src/examples/wasm/callback/wasm.js

@@ -0,0 +1,26 @@
+'use strict';
+
+const WASM_URL = 'wasm.wasm';
+
+var wasm;
+
+function init() {
+  const go = new Go();
+  if ('instantiateStreaming' in WebAssembly) {
+    WebAssembly.instantiateStreaming(fetch(WASM_URL), go.importObject).then(function (obj) {
+      wasm = obj.instance;
+      go.run(wasm);
+    })
+  } else {
+    fetch(WASM_URL).then(resp =>
+      resp.arrayBuffer()
+    ).then(bytes =>
+      WebAssembly.instantiate(bytes, go.importObject).then(function (obj) {
+        wasm = obj.instance;
+        go.run(wasm);
+      })
+    )
+  }
+}
+
+init();

src/machine/board_arduino.go

@@ -5,20 +5,20 @@ package machine
 const CPU_FREQUENCY = 16000000
 
 // LED on the Arduino
-const LED = 13
+const LED Pin = 13
 
 // ADC on the Arduino
 const (
-	ADC0 = 0
+	ADC0 Pin = 0
-	ADC1 = 1
+	ADC1 Pin = 1
-	ADC2 = 2
+	ADC2 Pin = 2
-	ADC3 = 3
+	ADC3 Pin = 3
-	ADC4 = 4 // Used by TWI for SDA
+	ADC4 Pin = 4 // Used by TWI for SDA
-	ADC5 = 5 // Used by TWI for SCL
+	ADC5 Pin = 5 // Used by TWI for SCL
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 1
+	UART_TX_PIN Pin = 1
-	UART_RX_PIN = 0
+	UART_RX_PIN Pin = 0
 )

src/machine/board_circuitplay_express.go

@@ -17,7 +17,7 @@ const (
 	D8  = PB23
 	D9  = PA06
 	D10 = PA07
-	D11 = 0xff // does not seem to exist
+	D11 = NoPin // does not seem to exist
 	D12 = PA02
 	D13 = PA17 // PWM available
 )
@@ -80,12 +80,12 @@ var (
 	I2C0 = I2C{Bus: sam.SERCOM5_I2CM,
 		SDA:     SDA_PIN,
 		SCL:     SCL_PIN,
-		PinMode: GPIO_SERCOM}
+		PinMode: PinSERCOM}
 	// internal device
 	I2C1 = I2C{Bus: sam.SERCOM1_I2CM,
 		SDA:     SDA1_PIN,
 		SCL:     SCL1_PIN,
-		PinMode: GPIO_SERCOM_ALT}
+		PinMode: PinSERCOMAlt}
 )
 
 // SPI pins (internal flash)
@@ -104,7 +104,7 @@ var (
 const (
 	I2S_SCK_PIN = PA10
 	I2S_SD_PIN  = PA08
-	I2S_WS_PIN  = 0xff // no WS, instead uses SCK to sync
+	I2S_WS_PIN  = NoPin // no WS, instead uses SCK to sync
 )
 
 // I2S on the Circuit Playground Express.

src/machine/board_digispark.go

@@ -3,5 +3,5 @@
 package machine
 
 const (
-	LED = 1
+	LED Pin = 1
 )

src/machine/board_feather-m0.go

@@ -0,0 +1,82 @@
+// +build sam,atsamd21,feather_m0
+
+package machine
+
+import "device/sam"
+
+// GPIO Pins
+const (
+	D0  = PA11  // UART0 RX
+	D1  = PA10  // UART0 TX
+	D2  = NoPin // does not seem to exist
+	D3  = PA09
+	D4  = PA08
+	D5  = PA15  // PWM available
+	D6  = PA20  // PWM available
+	D7  = NoPin // does not seem to exist
+	D8  = PA06
+	D9  = PA07 // PWM available
+	D10 = PA18 // can be used for PWM or UART1 TX
+	D11 = PA16 // can be used for PWM or UART1 RX
+	D12 = PA19 // PWM available
+	D13 = PA17 // PWM available
+)
+
+// Analog pins
+const (
+	A0 = PA02 // ADC/AIN[0]
+	A1 = PB08 // ADC/AIN[2]
+	A2 = PB09 // ADC/AIN[3]
+	A3 = PA04 // ADC/AIN[4]
+	A4 = PA05 // ADC/AIN[5]
+	A5 = PB02 // ADC/AIN[10]
+)
+
+const (
+	LED = D13
+)
+
+// UART0 aka USBCDC pins
+const (
+	USBCDC_DM_PIN = PA24
+	USBCDC_DP_PIN = PA25
+)
+
+// UART1 pins
+const (
+	UART_TX_PIN = D10
+	UART_RX_PIN = D11
+)
+
+// I2C pins
+const (
+	SDA_PIN = PA22 // SDA: SERCOM3/PAD[0]
+	SCL_PIN = PA23 // SCL: SERCOM3/PAD[1]
+)
+
+// I2C on the Feather M0.
+var (
+	I2C0 = I2C{Bus: sam.SERCOM3_I2CM,
+		SDA:     SDA_PIN,
+		SCL:     SCL_PIN,
+		PinMode: PinSERCOM}
+)
+
+// SPI pins
+const (
+	SPI0_SCK_PIN  = PB11 // SCK: SERCOM4/PAD[3]
+	SPI0_MOSI_PIN = PB10 // MOSI: SERCOM4/PAD[2]
+	SPI0_MISO_PIN = PA12 // MISO: SERCOM4/PAD[0]
+)
+
+// SPI on the Feather M0.
+var (
+	SPI0 = SPI{Bus: sam.SERCOM4_SPI}
+)
+
+// I2S pins
+const (
+	I2S_SCK_PIN = PA10
+	I2S_SD_PIN  = PA08
+	I2S_WS_PIN  = NoPin // TODO: figure out what this is on Feather M0.
+)

src/machine/board_itsybitsy-m0.go

@@ -59,7 +59,7 @@ var (
 	I2C0 = I2C{Bus: sam.SERCOM3_I2CM,
 		SDA:     SDA_PIN,
 		SCL:     SCL_PIN,
-		PinMode: GPIO_SERCOM}
+		PinMode: PinSERCOM}
 )
 
 // SPI pins
@@ -78,7 +78,7 @@ var (
 const (
 	I2S_SCK_PIN = PA10
 	I2S_SD_PIN  = PA08
-	I2S_WS_PIN  = 0xff // TODO: figure out what this is on ItsyBitsy M0.
+	I2S_WS_PIN  = NoPin // TODO: figure out what this is on ItsyBitsy M0.
 )
 
 // I2S on the ItsyBitsy M0.

src/machine/board_microbit.go

@@ -7,70 +7,70 @@ const HasLowFrequencyCrystal = false
 
 // Buttons on the micro:bit (A and B)
 const (
-	BUTTON  = BUTTONA
+	BUTTON  Pin = BUTTONA
-	BUTTONA = 17
+	BUTTONA Pin = 17
-	BUTTONB = 26
+	BUTTONB Pin = 26
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 24
+	UART_TX_PIN Pin = 24
-	UART_RX_PIN = 25
+	UART_RX_PIN Pin = 25
 )
 
 // ADC pins
 const (
-	ADC0 = 3 // P0 on the board
+	ADC0 Pin = 3 // P0 on the board
-	ADC1 = 2 // P1 on the board
+	ADC1 Pin = 2 // P1 on the board
-	ADC2 = 1 // P2 on the board
+	ADC2 Pin = 1 // P2 on the board
 )
 
 // I2C pins
 const (
-	SDA_PIN = 30 // P20 on the board
+	SDA_PIN Pin = 30 // P20 on the board
-	SCL_PIN = 0  // P19 on the board
+	SCL_PIN Pin = 0  // P19 on the board
 )
 
 // SPI pins
 const (
-	SPI0_SCK_PIN  = 23 // P13 on the board
+	SPI0_SCK_PIN  Pin = 23 // P13 on the board
-	SPI0_MOSI_PIN = 21 // P15 on the board
+	SPI0_MOSI_PIN Pin = 21 // P15 on the board
-	SPI0_MISO_PIN = 22 // P14 on the board
+	SPI0_MISO_PIN Pin = 22 // P14 on the board
 )
 
 // GPIO/Analog pins
 const (
-	P0  = 3
+	P0  Pin = 3
-	P1  = 2
+	P1  Pin = 2
-	P2  = 1
+	P2  Pin = 1
-	P3  = 4
+	P3  Pin = 4
-	P4  = 5
+	P4  Pin = 5
-	P5  = 17
+	P5  Pin = 17
-	P6  = 12
+	P6  Pin = 12
-	P7  = 11
+	P7  Pin = 11
-	P8  = 18
+	P8  Pin = 18
-	P9  = 10
+	P9  Pin = 10
-	P10 = 6
+	P10 Pin = 6
-	P11 = 26
+	P11 Pin = 26
-	P12 = 20
+	P12 Pin = 20
-	P13 = 23
+	P13 Pin = 23
-	P14 = 22
+	P14 Pin = 22
-	P15 = 21
+	P15 Pin = 21
-	P16 = 16
+	P16 Pin = 16
 )
 
 // LED matrix pins
 const (
-	LED_COL_1 = 4
+	LED_COL_1 Pin = 4
-	LED_COL_2 = 5
+	LED_COL_2 Pin = 5
-	LED_COL_3 = 6
+	LED_COL_3 Pin = 6
-	LED_COL_4 = 7
+	LED_COL_4 Pin = 7
-	LED_COL_5 = 8
+	LED_COL_5 Pin = 8
-	LED_COL_6 = 9
+	LED_COL_6 Pin = 9
-	LED_COL_7 = 10
+	LED_COL_7 Pin = 10
-	LED_COL_8 = 11
+	LED_COL_8 Pin = 11
-	LED_COL_9 = 12
+	LED_COL_9 Pin = 12
-	LED_ROW_1 = 13
+	LED_ROW_1 Pin = 13
-	LED_ROW_2 = 14
+	LED_ROW_2 Pin = 14
-	LED_ROW_3 = 15
+	LED_ROW_3 Pin = 15
 )

src/machine/board_nrf52840-mdk.go

@@ -6,27 +6,27 @@ const HasLowFrequencyCrystal = true
 
 // LEDs on the nrf52840-mdk (nRF52840 dev board)
 const (
-	LED       = LED_GREEN
+	LED       Pin = LED_GREEN
-	LED_GREEN = 22
+	LED_GREEN Pin = 22
-	LED_RED   = 23
+	LED_RED   Pin = 23
-	LED_BLUE  = 24
+	LED_BLUE  Pin = 24
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 20
+	UART_TX_PIN Pin = 20
-	UART_RX_PIN = 19
+	UART_RX_PIN Pin = 19
 )
 
 // I2C pins (unused)
 const (
-	SDA_PIN = 0xff
+	SDA_PIN = NoPin
-	SCL_PIN = 0xff
+	SCL_PIN = NoPin
 )
 
 // SPI pins (unused)
 const (
-	SPI0_SCK_PIN  = 0
+	SPI0_SCK_PIN  = NoPin
-	SPI0_MOSI_PIN = 0
+	SPI0_MOSI_PIN = NoPin
-	SPI0_MISO_PIN = 0
+	SPI0_MISO_PIN = NoPin
 )

src/machine/board_pca10031.go

@@ -10,30 +10,30 @@ const HasLowFrequencyCrystal = true
 
 // LED on the pca10031
 const (
-	LED       = LED_RED
+	LED       Pin = LED_RED
-	LED1      = LED_RED
+	LED1      Pin = LED_RED
-	LED2      = LED_GREEN
+	LED2      Pin = LED_GREEN
-	LED3      = LED_BLUE
+	LED3      Pin = LED_BLUE
-	LED_RED   = 21
+	LED_RED   Pin = 21
-	LED_GREEN = 22
+	LED_GREEN Pin = 22
-	LED_BLUE  = 23
+	LED_BLUE  Pin = 23
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 9
+	UART_TX_PIN Pin = 9
-	UART_RX_PIN = 11
+	UART_RX_PIN Pin = 11
 )
 
 // I2C pins (disabled)
 const (
-	SDA_PIN = 0xff
+	SDA_PIN = NoPin
-	SCL_PIN = 0xff
+	SCL_PIN = NoPin
 )
 
 // SPI pins (unused)
 const (
-	SPI0_SCK_PIN  = 0
+	SPI0_SCK_PIN  = NoPin
-	SPI0_MOSI_PIN = 0
+	SPI0_MOSI_PIN = NoPin
-	SPI0_MISO_PIN = 0
+	SPI0_MISO_PIN = NoPin
 )

src/machine/board_pca10040.go

@@ -7,47 +7,47 @@ const HasLowFrequencyCrystal = true
 
 // LEDs on the PCA10040 (nRF52832 dev board)
 const (
-	LED  = LED1
+	LED  Pin = LED1
-	LED1 = 17
+	LED1 Pin = 17
-	LED2 = 18
+	LED2 Pin = 18
-	LED3 = 19
+	LED3 Pin = 19
-	LED4 = 20
+	LED4 Pin = 20
 )
 
 // Buttons on the PCA10040 (nRF52832 dev board)
 const (
-	BUTTON  = BUTTON1
+	BUTTON  Pin = BUTTON1
-	BUTTON1 = 13
+	BUTTON1 Pin = 13
-	BUTTON2 = 14
+	BUTTON2 Pin = 14
-	BUTTON3 = 15
+	BUTTON3 Pin = 15
-	BUTTON4 = 16
+	BUTTON4 Pin = 16
 )
 
 // UART pins for NRF52840-DK
 const (
-	UART_TX_PIN = 6
+	UART_TX_PIN Pin = 6
-	UART_RX_PIN = 8
+	UART_RX_PIN Pin = 8
 )
 
 // ADC pins
 const (
-	ADC0 = 3
+	ADC0 Pin = 3
-	ADC1 = 4
+	ADC1 Pin = 4
-	ADC2 = 28
+	ADC2 Pin = 28
-	ADC3 = 29
+	ADC3 Pin = 29
-	ADC4 = 30
+	ADC4 Pin = 30
-	ADC5 = 31
+	ADC5 Pin = 31
 )
 
 // I2C pins
 const (
-	SDA_PIN = 26
+	SDA_PIN Pin = 26
-	SCL_PIN = 27
+	SCL_PIN Pin = 27
 )
 
 // SPI pins
 const (
-	SPI0_SCK_PIN  = 25
+	SPI0_SCK_PIN  Pin = 25
-	SPI0_MOSI_PIN = 23
+	SPI0_MOSI_PIN Pin = 23
-	SPI0_MISO_PIN = 24
+	SPI0_MISO_PIN Pin = 24
 )

src/machine/board_pca10056.go

@@ -6,47 +6,47 @@ const HasLowFrequencyCrystal = true
 
 // LEDs on the pca10056
 const (
-	LED  = LED1
+	LED  Pin = LED1
-	LED1 = 13
+	LED1 Pin = 13
-	LED2 = 14
+	LED2 Pin = 14
-	LED3 = 15
+	LED3 Pin = 15
-	LED4 = 16
+	LED4 Pin = 16
 )
 
 // Buttons on the pca10056
 const (
-	BUTTON  = BUTTON1
+	BUTTON  Pin = BUTTON1
-	BUTTON1 = 11
+	BUTTON1 Pin = 11
-	BUTTON2 = 12
+	BUTTON2 Pin = 12
-	BUTTON3 = 24
+	BUTTON3 Pin = 24
-	BUTTON4 = 25
+	BUTTON4 Pin = 25
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 6
+	UART_TX_PIN Pin = 6
-	UART_RX_PIN = 8
+	UART_RX_PIN Pin = 8
 )
 
 // ADC pins
 const (
-	ADC0 = 3
+	ADC0 Pin = 3
-	ADC1 = 4
+	ADC1 Pin = 4
-	ADC2 = 28
+	ADC2 Pin = 28
-	ADC3 = 29
+	ADC3 Pin = 29
-	ADC4 = 30
+	ADC4 Pin = 30
-	ADC5 = 31
+	ADC5 Pin = 31
 )
 
 // I2C pins
 const (
-	SDA_PIN = 26 // P0.26
+	SDA_PIN Pin = 26 // P0.26
-	SCL_PIN = 27 // P0.27
+	SCL_PIN Pin = 27 // P0.27
 )
 
 // SPI pins
 const (
-	SPI0_SCK_PIN  = 47 // P1.15
+	SPI0_SCK_PIN  Pin = 47 // P1.15
-	SPI0_MOSI_PIN = 45 // P1.13
+	SPI0_MOSI_PIN Pin = 45 // P1.13
-	SPI0_MISO_PIN = 46 // P1.14
+	SPI0_MISO_PIN Pin = 46 // P1.14
 )

src/machine/board_reelboard.go

@@ -6,37 +6,37 @@ const HasLowFrequencyCrystal = true
 
 // LEDs on the reel board
 const (
-	LED        = LED1
+	LED        Pin = LED1
-	LED1       = LED_YELLOW
+	LED1       Pin = LED_YELLOW
-	LED2       = LED_RED
+	LED2       Pin = LED_RED
-	LED3       = LED_GREEN
+	LED3       Pin = LED_GREEN
-	LED4       = LED_BLUE
+	LED4       Pin = LED_BLUE
-	LED_RED    = 11
+	LED_RED    Pin = 11
-	LED_GREEN  = 12
+	LED_GREEN  Pin = 12
-	LED_BLUE   = 41
+	LED_BLUE   Pin = 41
-	LED_YELLOW = 13
+	LED_YELLOW Pin = 13
 )
 
 // User "a" button on the reel board
 const (
-	BUTTON = 7
+	BUTTON Pin = 7
 )
 
 // UART pins
 const (
-	UART_TX_PIN = 6
+	UART_TX_PIN Pin = 6
-	UART_RX_PIN = 8
+	UART_RX_PIN Pin = 8
 )
 
 // I2C pins
 const (
-	SDA_PIN = 26
+	SDA_PIN Pin = 26
-	SCL_PIN = 27
+	SCL_PIN Pin = 27
 )
 
 // SPI pins
 const (
-	SPI0_SCK_PIN  = 47
+	SPI0_SCK_PIN  Pin = 47
-	SPI0_MOSI_PIN = 45
+	SPI0_MOSI_PIN Pin = 45
-	SPI0_MISO_PIN = 46
+	SPI0_MISO_PIN Pin = 46
 )

src/machine/board_trinket.go

@@ -0,0 +1,73 @@
+// +build sam,atsamd21,trinket_m0
+
+package machine
+
+import "device/sam"
+
+// GPIO Pins
+const (
+	D0  = PA08 // PWM available
+	D1  = PA02
+	D2  = PA09 // PWM available
+	D3  = PA07 // PWM available / UART0 RX
+	D4  = PA06 // PWM available / UART0 TX
+	D13 = PA10 // LED
+)
+
+// Analog pins
+const (
+	A0 = D1
+	A1 = D2
+	A2 = D0
+	A3 = D3
+	A4 = D4
+)
+
+const (
+	LED = D13
+)
+
+// UART0 aka USBCDC pins
+const (
+	USBCDC_DM_PIN = PA24
+	USBCDC_DP_PIN = PA25
+)
+
+// UART1 pins
+const (
+	UART_TX_PIN = D4
+	UART_RX_PIN = D3
+)
+
+// SPI pins
+const (
+	SPI0_SCK_PIN  = D3
+	SPI0_MOSI_PIN = D4
+	SPI0_MISO_PIN = D2
+)
+
+// SPI on the Trinket M0.
+var (
+	SPI0 = SPI{Bus: sam.SERCOM0_SPI}
+)
+
+// I2C pins
+const (
+	SDA_PIN = D0 // SDA
+	SCL_PIN = D2 // SCL
+)
+
+// I2C on the Trinket M0.
+var (
+	I2C0 = I2C{Bus: sam.SERCOM2_I2CM,
+		SDA:     SDA_PIN,
+		SCL:     SCL_PIN,
+		PinMode: PinSERCOMAlt}
+)
+
+// I2S pins
+const (
+	I2S_SCK_PIN = PA10
+	I2S_SD_PIN  = PA08
+	I2S_WS_PIN  = NoPin // TODO: figure out what this is on Trinket M0.
+)

src/machine/i2s.go

@@ -41,9 +41,9 @@ const (
 
 // All fields are optional and may not be required or used on a particular platform.
 type I2SConfig struct {
-	SCK               uint8
+	SCK               Pin
-	WS                uint8
+	WS                Pin
-	SD                uint8
+	SD                Pin
 	Mode              I2SMode
 	Standard          I2SStandard
 	ClockSource       I2SClockSource

src/machine/machine.go

@@ -1,25 +1,36 @@
 package machine
 
-type GPIOConfig struct {
+type PinConfig struct {
-	Mode GPIOMode
+	Mode PinMode
 }
 
-type GPIO struct {
+// Pin is a single pin on a chip, which may be connected to other hardware
-	Pin uint8
+// devices. It can either be used directly as GPIO pin or it can be used in
-}
+// other peripherals like ADC, I2C, etc.
+type Pin int8
 
-func (p GPIO) High() {
+// NoPin explicitly indicates "not a pin". Use this pin if you want to leave one
+// of the pins in a peripheral unconfigured (if supported by the hardware).
+const NoPin = Pin(-1)
+
+// High sets this GPIO pin to high, assuming it has been configured as an output
+// pin. It is hardware dependent (and often undefined) what happens if you set a
+// pin to high that is not configured as an output pin.
+func (p Pin) High() {
 	p.Set(true)
 }
 
-func (p GPIO) Low() {
+// Low sets this GPIO pin to low, assuming it has been configured as an output
+// pin. It is hardware dependent (and often undefined) what happens if you set a
+// pin to low that is not configured as an output pin.
+func (p Pin) Low() {
 	p.Set(false)
 }
 
 type PWM struct {
-	Pin uint8
+	Pin Pin
 }
 
 type ADC struct {
-	Pin uint8
+	Pin Pin
 }

src/machine/machine_atmega.go

@@ -7,38 +7,38 @@ import (
 )
 
 // Configure sets the pin to input or output.
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
-	if config.Mode == GPIO_OUTPUT { // set output bit
+	if config.Mode == PinOutput { // set output bit
-		if p.Pin < 8 {
+		if p < 8 {
-			avr.DDRD.SetBits(1 << p.Pin)
+			avr.DDRD.SetBits(1 << uint8(p))
 		} else {
-			avr.DDRB.SetBits(1 << (p.Pin - 8))
+			avr.DDRB.SetBits(1 << uint8(p-8))
 		}
 	} else { // configure input: clear output bit
-		if p.Pin < 8 {
+		if p < 8 {
-			avr.DDRD.ClearBits(1 << p.Pin)
+			avr.DDRD.ClearBits(1 << uint8(p))
 		} else {
-			avr.DDRB.ClearBits(1 << (p.Pin - 8))
+			avr.DDRB.ClearBits(1 << uint8(p-8))
 		}
 	}
 }
 
 // Get returns the current value of a GPIO pin.
-func (p GPIO) Get() bool {
+func (p Pin) Get() bool {
-	if p.Pin < 8 {
+	if p < 8 {
-		val := avr.PIND.Get() & (1 << p.Pin)
+		val := avr.PIND.Get() & (1 << uint8(p))
 		return (val > 0)
 	} else {
-		val := avr.PINB.Get() & (1 << (p.Pin - 8))
+		val := avr.PINB.Get() & (1 << uint8(p-8))
 		return (val > 0)
 	}
 }
 
-func (p GPIO) getPortMask() (*avr.Register8, uint8) {
+func (p Pin) getPortMask() (*avr.Register8, uint8) {
-	if p.Pin < 8 {
+	if p < 8 {
-		return avr.PORTD, 1 << p.Pin
+		return avr.PORTD, 1 << uint8(p)
 	} else {
-		return avr.PORTB, 1 << (p.Pin - 8)
+		return avr.PORTB, 1 << uint8(p-8)
 	}
 }
 
@@ -66,9 +66,9 @@ func InitPWM() {
 // Configure configures a PWM pin for output.
 func (pwm PWM) Configure() {
 	if pwm.Pin < 8 {
-		avr.DDRD.SetBits(1 << pwm.Pin)
+		avr.DDRD.SetBits(1 << uint8(pwm.Pin))
 	} else {
-		avr.DDRB.SetBits(1 << (pwm.Pin - 8))
+		avr.DDRB.SetBits(1 << uint8(pwm.Pin-8))
 	}
 }
 
@@ -165,7 +165,7 @@ func (i2c I2C) start(address uint8, write bool) {
 	avr.TWCR.Set((avr.TWCR_TWINT | avr.TWCR_TWSTA | avr.TWCR_TWEN))
 
 	// Wait till start condition is transmitted.
-	for (avr.TWCR.Get() & avr.TWCR_TWINT) == 0 {
+	for !avr.TWCR.HasBits(avr.TWCR_TWINT) {
 	}
 
 	// Write 7-bit shifted peripheral address.
@@ -182,7 +182,7 @@ func (i2c I2C) stop() {
 	avr.TWCR.Set(avr.TWCR_TWEN | avr.TWCR_TWINT | avr.TWCR_TWSTO)
 
 	// Wait for stop condition to be executed on bus.
-	for (avr.TWCR.Get() & avr.TWCR_TWSTO) == 0 {
+	for !avr.TWCR.HasBits(avr.TWCR_TWSTO) {
 	}
 }
 
@@ -195,7 +195,7 @@ func (i2c I2C) writeByte(data byte) {
 	avr.TWCR.Set(avr.TWCR_TWEN | avr.TWCR_TWINT)
 
 	// Wait till data is transmitted.
-	for (avr.TWCR.Get() & avr.TWCR_TWINT) == 0 {
+	for !avr.TWCR.HasBits(avr.TWCR_TWINT) {
 	}
 }
 
@@ -205,7 +205,7 @@ func (i2c I2C) readByte() byte {
 	avr.TWCR.Set(avr.TWCR_TWEN | avr.TWCR_TWINT | avr.TWCR_TWEA)
 
 	// Wait till read request is transmitted.
-	for (avr.TWCR.Get() & avr.TWCR_TWINT) == 0 {
+	for !avr.TWCR.HasBits(avr.TWCR_TWINT) {
 	}
 
 	return byte(avr.TWDR.Get())
@@ -239,7 +239,7 @@ func (uart UART) Configure(config UARTConfig) {
 // WriteByte writes a byte of data to the UART.
 func (uart UART) WriteByte(c byte) error {
 	// Wait until UART buffer is not busy.
-	for (avr.UCSR0A.Get() & avr.UCSR0A_UDRE0) == 0 {
+	for !avr.UCSR0A.HasBits(avr.UCSR0A_UDRE0) {
 	}
 	avr.UDR0.Set(c) // send char
 	return nil
@@ -251,7 +251,7 @@ func handleUSART_RX() {
 	data := avr.UDR0.Get()
 
 	// Ensure no error.
-	if (avr.UCSR0A.Get() & (avr.UCSR0A_FE0 | avr.UCSR0A_DOR0 | avr.UCSR0A_UPE0)) == 0 {
+	if !avr.UCSR0A.HasBits(avr.UCSR0A_FE0 | avr.UCSR0A_DOR0 | avr.UCSR0A_UPE0) {
 		// Put data from UDR register into buffer.
 		UART0.Receive(byte(data))
 	}

src/machine/machine_atsamd21e18.go

@@ -0,0 +1,334 @@
+// +build sam,atsamd21,atsamd21e18
+
+// Peripheral abstraction layer for the atsamd21.
+//
+// Datasheet:
+// http://ww1.microchip.com/downloads/en/DeviceDoc/SAMD21-Family-DataSheet-DS40001882D.pdf
+//
+package machine
+
+import (
+	"device/sam"
+)
+
+// Return the register and mask to enable a given GPIO pin. This can be used to
+// implement bit-banged drivers.
+func (p Pin) PortMaskSet() (*uint32, uint32) {
+	return &sam.PORT.OUTSET0.Reg, 1 << uint8(p)
+}
+
+// Return the register and mask to disable a given port. This can be used to
+// implement bit-banged drivers.
+func (p Pin) PortMaskClear() (*uint32, uint32) {
+	return &sam.PORT.OUTCLR0.Reg, 1 << uint8(p)
+}
+
+// Set the pin to high or low.
+// Warning: only use this on an output pin!
+func (p Pin) Set(high bool) {
+	if high {
+		sam.PORT.OUTSET0.Set(1 << uint8(p))
+	} else {
+		sam.PORT.OUTCLR0.Set(1 << uint8(p))
+	}
+}
+
+// Get returns the current value of a GPIO pin.
+func (p Pin) Get() bool {
+	return (sam.PORT.IN0.Get()>>uint8(p))&1 > 0
+}
+
+// Configure this pin with the given configuration.
+func (p Pin) Configure(config PinConfig) {
+	switch config.Mode {
+	case PinOutput:
+		sam.PORT.DIRSET0.Set(1 << uint8(p))
+		// output is also set to input enable so pin can read back its own value
+		p.setPinCfg(sam.PORT_PINCFG0_INEN)
+
+	case PinInput:
+		sam.PORT.DIRCLR0.Set(1 << uint8(p))
+		p.setPinCfg(sam.PORT_PINCFG0_INEN)
+
+	case PinInputPulldown:
+		sam.PORT.DIRCLR0.Set(1 << uint8(p))
+		sam.PORT.OUTCLR0.Set(1 << uint8(p))
+		p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+
+	case PinInputPullup:
+		sam.PORT.DIRCLR0.Set(1 << uint8(p))
+		sam.PORT.OUTSET0.Set(1 << uint8(p))
+		p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+
+	case PinSERCOM:
+		if uint8(p)&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinSERCOM) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinSERCOM) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR | sam.PORT_PINCFG0_INEN)
+
+	case PinSERCOMAlt:
+		if uint8(p)&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinSERCOMAlt) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinSERCOMAlt) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR)
+
+	case PinCom:
+		if uint8(p)&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinCom) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinCom) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN)
+	case PinAnalog:
+		if uint8(p)&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinAnalog) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinAnalog) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR)
+	}
+}
+
+// getPMux returns the value for the correct PMUX register for this pin.
+func (p Pin) getPMux() uint8 {
+	switch p >> 1 {
+	case 0:
+		return sam.PORT.PMUX0_0.Get()
+	case 1:
+		return sam.PORT.PMUX0_1.Get()
+	case 2:
+		return sam.PORT.PMUX0_2.Get()
+	case 3:
+		return sam.PORT.PMUX0_3.Get()
+	case 4:
+		return sam.PORT.PMUX0_4.Get()
+	case 5:
+		return sam.PORT.PMUX0_5.Get()
+	case 6:
+		return sam.PORT.PMUX0_6.Get()
+	case 7:
+		return sam.PORT.PMUX0_7.Get()
+	case 8:
+		return sam.PORT.PMUX0_8.Get()
+	case 9:
+		return sam.PORT.PMUX0_9.Get()
+	case 10:
+		return sam.PORT.PMUX0_10.Get()
+	case 11:
+		return sam.PORT.PMUX0_11.Get()
+	case 12:
+		return sam.PORT.PMUX0_12.Get()
+	case 13:
+		return sam.PORT.PMUX0_13.Get()
+	case 14:
+		return sam.PORT.PMUX0_14.Get()
+	case 15:
+		return sam.PORT.PMUX0_15.Get()
+	default:
+		return 0
+	}
+}
+
+// setPMux sets the value for the correct PMUX register for this pin.
+func (p Pin) setPMux(val uint8) {
+	switch p >> 1 {
+	case 0:
+		sam.PORT.PMUX0_0.Set(val)
+	case 1:
+		sam.PORT.PMUX0_1.Set(val)
+	case 2:
+		sam.PORT.PMUX0_2.Set(val)
+	case 3:
+		sam.PORT.PMUX0_3.Set(val)
+	case 4:
+		sam.PORT.PMUX0_4.Set(val)
+	case 5:
+		sam.PORT.PMUX0_5.Set(val)
+	case 6:
+		sam.PORT.PMUX0_6.Set(val)
+	case 7:
+		sam.PORT.PMUX0_7.Set(val)
+	case 8:
+		sam.PORT.PMUX0_8.Set(val)
+	case 9:
+		sam.PORT.PMUX0_9.Set(val)
+	case 10:
+		sam.PORT.PMUX0_10.Set(val)
+	case 11:
+		sam.PORT.PMUX0_11.Set(val)
+	case 12:
+		sam.PORT.PMUX0_12.Set(val)
+	case 13:
+		sam.PORT.PMUX0_13.Set(val)
+	case 14:
+		sam.PORT.PMUX0_14.Set(val)
+	case 15:
+		sam.PORT.PMUX0_15.Set(val)
+	}
+}
+
+// getPinCfg returns the value for the correct PINCFG register for this pin.
+func (p Pin) getPinCfg() uint8 {
+	switch p {
+	case 0:
+		return sam.PORT.PINCFG0_0.Get()
+	case 1:
+		return sam.PORT.PINCFG0_1.Get()
+	case 2:
+		return sam.PORT.PINCFG0_2.Get()
+	case 3:
+		return sam.PORT.PINCFG0_3.Get()
+	case 4:
+		return sam.PORT.PINCFG0_4.Get()
+	case 5:
+		return sam.PORT.PINCFG0_5.Get()
+	case 6:
+		return sam.PORT.PINCFG0_6.Get()
+	case 7:
+		return sam.PORT.PINCFG0_7.Get()
+	case 8:
+		return sam.PORT.PINCFG0_8.Get()
+	case 9:
+		return sam.PORT.PINCFG0_9.Get()
+	case 10:
+		return sam.PORT.PINCFG0_10.Get()
+	case 11:
+		return sam.PORT.PINCFG0_11.Get()
+	case 12:
+		return sam.PORT.PINCFG0_12.Get()
+	case 13:
+		return sam.PORT.PINCFG0_13.Get()
+	case 14:
+		return sam.PORT.PINCFG0_14.Get()
+	case 15:
+		return sam.PORT.PINCFG0_15.Get()
+	case 16:
+		return sam.PORT.PINCFG0_16.Get()
+	case 17:
+		return sam.PORT.PINCFG0_17.Get()
+	case 18:
+		return sam.PORT.PINCFG0_18.Get()
+	case 19:
+		return sam.PORT.PINCFG0_19.Get()
+	case 20:
+		return sam.PORT.PINCFG0_20.Get()
+	case 21:
+		return sam.PORT.PINCFG0_21.Get()
+	case 22:
+		return sam.PORT.PINCFG0_22.Get()
+	case 23:
+		return sam.PORT.PINCFG0_23.Get()
+	case 24:
+		return sam.PORT.PINCFG0_24.Get()
+	case 25:
+		return sam.PORT.PINCFG0_25.Get()
+	case 26:
+		return sam.PORT.PINCFG0_26.Get()
+	case 27:
+		return sam.PORT.PINCFG0_27.Get()
+	case 28:
+		return sam.PORT.PINCFG0_28.Get()
+	case 29:
+		return sam.PORT.PINCFG0_29.Get()
+	case 30:
+		return sam.PORT.PINCFG0_30.Get()
+	case 31:
+		return sam.PORT.PINCFG0_31.Get()
+	default:
+		return 0
+	}
+}
+
+// setPinCfg sets the value for the correct PINCFG register for this pin.
+func (p Pin) setPinCfg(val uint8) {
+	switch p {
+	case 0:
+		sam.PORT.PINCFG0_0.Set(val)
+	case 1:
+		sam.PORT.PINCFG0_1.Set(val)
+	case 2:
+		sam.PORT.PINCFG0_2.Set(val)
+	case 3:
+		sam.PORT.PINCFG0_3.Set(val)
+	case 4:
+		sam.PORT.PINCFG0_4.Set(val)
+	case 5:
+		sam.PORT.PINCFG0_5.Set(val)
+	case 6:
+		sam.PORT.PINCFG0_6.Set(val)
+	case 7:
+		sam.PORT.PINCFG0_7.Set(val)
+	case 8:
+		sam.PORT.PINCFG0_8.Set(val)
+	case 9:
+		sam.PORT.PINCFG0_9.Set(val)
+	case 10:
+		sam.PORT.PINCFG0_10.Set(val)
+	case 11:
+		sam.PORT.PINCFG0_11.Set(val)
+	case 12:
+		sam.PORT.PINCFG0_12.Set(val)
+	case 13:
+		sam.PORT.PINCFG0_13.Set(val)
+	case 14:
+		sam.PORT.PINCFG0_14.Set(val)
+	case 15:
+		sam.PORT.PINCFG0_15.Set(val)
+	case 16:
+		sam.PORT.PINCFG0_16.Set(val)
+	case 17:
+		sam.PORT.PINCFG0_17.Set(val)
+	case 18:
+		sam.PORT.PINCFG0_18.Set(val)
+	case 19:
+		sam.PORT.PINCFG0_19.Set(val)
+	case 20:
+		sam.PORT.PINCFG0_20.Set(val)
+	case 21:
+		sam.PORT.PINCFG0_21.Set(val)
+	case 22:
+		sam.PORT.PINCFG0_22.Set(val)
+	case 23:
+		sam.PORT.PINCFG0_23.Set(val)
+	case 24:
+		sam.PORT.PINCFG0_24.Set(val)
+	case 25:
+		sam.PORT.PINCFG0_25.Set(val)
+	case 26:
+		sam.PORT.PINCFG0_26.Set(val)
+	case 27:
+		sam.PORT.PINCFG0_27.Set(val)
+	case 28:
+		sam.PORT.PINCFG0_28.Set(val)
+	case 29:
+		sam.PORT.PINCFG0_29.Set(val)
+	case 30:
+		sam.PORT.PINCFG0_30.Set(val)
+	case 31:
+		sam.PORT.PINCFG0_31.Set(val)
+	}
+}

src/machine/machine_atsamd21g18.go

@@ -0,0 +1,569 @@
+// +build sam,atsamd21,atsamd21g18
+
+// Peripheral abstraction layer for the atsamd21.
+//
+// Datasheet:
+// http://ww1.microchip.com/downloads/en/DeviceDoc/SAMD21-Family-DataSheet-DS40001882D.pdf
+//
+package machine
+
+import (
+	"device/sam"
+)
+
+// Return the register and mask to enable a given GPIO pin. This can be used to
+// implement bit-banged drivers.
+func (p Pin) PortMaskSet() (*uint32, uint32) {
+	if p < 32 {
+		return &sam.PORT.OUTSET0.Reg, 1 << uint8(p)
+	} else {
+		return &sam.PORT.OUTSET1.Reg, 1 << uint8(p-32)
+	}
+}
+
+// Return the register and mask to disable a given port. This can be used to
+// implement bit-banged drivers.
+func (p Pin) PortMaskClear() (*uint32, uint32) {
+	if p < 32 {
+		return &sam.PORT.OUTCLR0.Reg, 1 << uint8(p)
+	} else {
+		return &sam.PORT.OUTCLR1.Reg, 1 << uint8(p-32)
+	}
+}
+
+// Set the pin to high or low.
+// Warning: only use this on an output pin!
+func (p Pin) Set(high bool) {
+	if p < 32 {
+		if high {
+			sam.PORT.OUTSET0.Set(1 << uint8(p))
+		} else {
+			sam.PORT.OUTCLR0.Set(1 << uint8(p))
+		}
+	} else {
+		if high {
+			sam.PORT.OUTSET1.Set(1 << uint8(p-32))
+		} else {
+			sam.PORT.OUTCLR1.Set(1 << uint8(p-32))
+		}
+	}
+}
+
+// Get returns the current value of a GPIO pin.
+func (p Pin) Get() bool {
+	if p < 32 {
+		return (sam.PORT.IN0.Get()>>uint8(p))&1 > 0
+	} else {
+		return (sam.PORT.IN1.Get()>>(uint8(p)-32))&1 > 0
+	}
+}
+
+// Configure this pin with the given configuration.
+func (p Pin) Configure(config PinConfig) {
+	switch config.Mode {
+	case PinOutput:
+		if p < 32 {
+			sam.PORT.DIRSET0.Set(1 << uint8(p))
+			// output is also set to input enable so pin can read back its own value
+			p.setPinCfg(sam.PORT_PINCFG0_INEN)
+		} else {
+			sam.PORT.DIRSET1.Set(1 << uint8(p-32))
+			// output is also set to input enable so pin can read back its own value
+			p.setPinCfg(sam.PORT_PINCFG0_INEN)
+		}
+
+	case PinInput:
+		if p < 32 {
+			sam.PORT.DIRCLR0.Set(1 << uint8(p))
+			p.setPinCfg(sam.PORT_PINCFG0_INEN)
+		} else {
+			sam.PORT.DIRCLR1.Set(1<<uint8(p) - 32)
+			p.setPinCfg(sam.PORT_PINCFG0_INEN)
+		}
+
+	case PinInputPulldown:
+		if p < 32 {
+			sam.PORT.DIRCLR0.Set(1 << uint8(p))
+			sam.PORT.OUTCLR0.Set(1 << uint8(p))
+			p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+		} else {
+			sam.PORT.DIRCLR1.Set(1<<uint8(p) - 32)
+			sam.PORT.OUTCLR1.Set(1<<uint8(p) - 32)
+			p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+		}
+
+	case PinInputPullup:
+		if p < 32 {
+			sam.PORT.DIRCLR0.Set(1 << uint8(p))
+			sam.PORT.OUTSET0.Set(1 << uint8(p))
+			p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+		} else {
+			sam.PORT.DIRCLR1.Set(1<<uint8(p) - 32)
+			sam.PORT.OUTSET1.Set(1<<uint8(p) - 32)
+			p.setPinCfg(sam.PORT_PINCFG0_INEN | sam.PORT_PINCFG0_PULLEN)
+		}
+
+	case PinSERCOM:
+		if p&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinSERCOM) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinSERCOM) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR | sam.PORT_PINCFG0_INEN)
+
+	case PinSERCOMAlt:
+		if p&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinSERCOMAlt) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinSERCOMAlt) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR)
+
+	case PinCom:
+		if p&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinCom) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinCom) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN)
+	case PinAnalog:
+		if p&1 > 0 {
+			// odd pin, so save the even pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXE_Msk
+			p.setPMux(val | (uint8(PinAnalog) << sam.PORT_PMUX0_PMUXO_Pos))
+		} else {
+			// even pin, so save the odd pins
+			val := p.getPMux() & sam.PORT_PMUX0_PMUXO_Msk
+			p.setPMux(val | (uint8(PinAnalog) << sam.PORT_PMUX0_PMUXE_Pos))
+		}
+		// enable port config
+		p.setPinCfg(sam.PORT_PINCFG0_PMUXEN | sam.PORT_PINCFG0_DRVSTR)
+	}
+}
+
+// getPMux returns the value for the correct PMUX register for this pin.
+func (p Pin) getPMux() uint8 {
+	switch uint8(p) >> 1 {
+	case 0:
+		return sam.PORT.PMUX0_0.Get()
+	case 1:
+		return sam.PORT.PMUX0_1.Get()
+	case 2:
+		return sam.PORT.PMUX0_2.Get()
+	case 3:
+		return sam.PORT.PMUX0_3.Get()
+	case 4:
+		return sam.PORT.PMUX0_4.Get()
+	case 5:
+		return sam.PORT.PMUX0_5.Get()
+	case 6:
+		return sam.PORT.PMUX0_6.Get()
+	case 7:
+		return sam.PORT.PMUX0_7.Get()
+	case 8:
+		return sam.PORT.PMUX0_8.Get()
+	case 9:
+		return sam.PORT.PMUX0_9.Get()
+	case 10:
+		return sam.PORT.PMUX0_10.Get()
+	case 11:
+		return sam.PORT.PMUX0_11.Get()
+	case 12:
+		return sam.PORT.PMUX0_12.Get()
+	case 13:
+		return sam.PORT.PMUX0_13.Get()
+	case 14:
+		return sam.PORT.PMUX0_14.Get()
+	case 15:
+		return sam.PORT.PMUX0_15.Get()
+	case 16:
+		return uint8(sam.PORT.PMUX1_0.Get()>>0) & 0xff
+	case 17:
+		return uint8(sam.PORT.PMUX1_0.Get()>>8) & 0xff
+	case 18:
+		return uint8(sam.PORT.PMUX1_0.Get()>>16) & 0xff
+	case 19:
+		return uint8(sam.PORT.PMUX1_0.Get()>>24) & 0xff
+	case 20:
+		return uint8(sam.PORT.PMUX1_4.Get()>>0) & 0xff
+	case 21:
+		return uint8(sam.PORT.PMUX1_4.Get()>>8) & 0xff
+	case 22:
+		return uint8(sam.PORT.PMUX1_4.Get()>>16) & 0xff
+	case 23:
+		return uint8(sam.PORT.PMUX1_4.Get()>>24) & 0xff
+	case 24:
+		return uint8(sam.PORT.PMUX1_8.Get()>>0) & 0xff
+	case 25:
+		return uint8(sam.PORT.PMUX1_8.Get()>>8) & 0xff
+	case 26:
+		return uint8(sam.PORT.PMUX1_8.Get()>>16) & 0xff
+	case 27:
+		return uint8(sam.PORT.PMUX1_8.Get()>>24) & 0xff
+	case 28:
+		return uint8(sam.PORT.PMUX1_12.Get()>>0) & 0xff
+	case 29:
+		return uint8(sam.PORT.PMUX1_12.Get()>>8) & 0xff
+	case 30:
+		return uint8(sam.PORT.PMUX1_12.Get()>>16) & 0xff
+	case 31:
+		return uint8(sam.PORT.PMUX1_12.Get()>>24) & 0xff
+	default:
+		return 0
+	}
+}
+
+// setPMux sets the value for the correct PMUX register for this pin.
+func (p Pin) setPMux(val uint8) {
+	switch uint8(p) >> 1 {
+	case 0:
+		sam.PORT.PMUX0_0.Set(val)
+	case 1:
+		sam.PORT.PMUX0_1.Set(val)
+	case 2:
+		sam.PORT.PMUX0_2.Set(val)
+	case 3:
+		sam.PORT.PMUX0_3.Set(val)
+	case 4:
+		sam.PORT.PMUX0_4.Set(val)
+	case 5:
+		sam.PORT.PMUX0_5.Set(val)
+	case 6:
+		sam.PORT.PMUX0_6.Set(val)
+	case 7:
+		sam.PORT.PMUX0_7.Set(val)
+	case 8:
+		sam.PORT.PMUX0_8.Set(val)
+	case 9:
+		sam.PORT.PMUX0_9.Set(val)
+	case 10:
+		sam.PORT.PMUX0_10.Set(val)
+	case 11:
+		sam.PORT.PMUX0_11.Set(val)
+	case 12:
+		sam.PORT.PMUX0_12.Set(val)
+	case 13:
+		sam.PORT.PMUX0_13.Set(val)
+	case 14:
+		sam.PORT.PMUX0_14.Set(val)
+	case 15:
+		sam.PORT.PMUX0_15.Set(val)
+	case 16:
+		sam.PORT.PMUX1_0.Set(sam.PORT.PMUX1_0.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 17:
+		sam.PORT.PMUX1_0.Set(sam.PORT.PMUX1_0.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 18:
+		sam.PORT.PMUX1_0.Set(sam.PORT.PMUX1_0.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 19:
+		sam.PORT.PMUX1_0.Set(sam.PORT.PMUX1_0.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 20:
+		sam.PORT.PMUX1_4.Set(sam.PORT.PMUX1_4.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 21:
+		sam.PORT.PMUX1_4.Set(sam.PORT.PMUX1_4.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 22:
+		sam.PORT.PMUX1_4.Set(sam.PORT.PMUX1_4.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 23:
+		sam.PORT.PMUX1_4.Set(sam.PORT.PMUX1_4.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 24:
+		sam.PORT.PMUX1_8.Set(sam.PORT.PMUX1_8.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 25:
+		sam.PORT.PMUX1_8.Set(sam.PORT.PMUX1_8.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 26:
+		sam.PORT.PMUX1_8.Set(sam.PORT.PMUX1_8.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 27:
+		sam.PORT.PMUX1_8.Set(sam.PORT.PMUX1_8.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 28:
+		sam.PORT.PMUX1_12.Set(sam.PORT.PMUX1_12.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 29:
+		sam.PORT.PMUX1_12.Set(sam.PORT.PMUX1_12.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 30:
+		sam.PORT.PMUX1_12.Set(sam.PORT.PMUX1_12.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 31:
+		sam.PORT.PMUX1_12.Set(sam.PORT.PMUX1_12.Get()&^(0xff<<24) | (uint32(val) << 24))
+	}
+}
+
+// getPinCfg returns the value for the correct PINCFG register for this pin.
+func (p Pin) getPinCfg() uint8 {
+	switch p {
+	case 0:
+		return sam.PORT.PINCFG0_0.Get()
+	case 1:
+		return sam.PORT.PINCFG0_1.Get()
+	case 2:
+		return sam.PORT.PINCFG0_2.Get()
+	case 3:
+		return sam.PORT.PINCFG0_3.Get()
+	case 4:
+		return sam.PORT.PINCFG0_4.Get()
+	case 5:
+		return sam.PORT.PINCFG0_5.Get()
+	case 6:
+		return sam.PORT.PINCFG0_6.Get()
+	case 7:
+		return sam.PORT.PINCFG0_7.Get()
+	case 8:
+		return sam.PORT.PINCFG0_8.Get()
+	case 9:
+		return sam.PORT.PINCFG0_9.Get()
+	case 10:
+		return sam.PORT.PINCFG0_10.Get()
+	case 11:
+		return sam.PORT.PINCFG0_11.Get()
+	case 12:
+		return sam.PORT.PINCFG0_12.Get()
+	case 13:
+		return sam.PORT.PINCFG0_13.Get()
+	case 14:
+		return sam.PORT.PINCFG0_14.Get()
+	case 15:
+		return sam.PORT.PINCFG0_15.Get()
+	case 16:
+		return sam.PORT.PINCFG0_16.Get()
+	case 17:
+		return sam.PORT.PINCFG0_17.Get()
+	case 18:
+		return sam.PORT.PINCFG0_18.Get()
+	case 19:
+		return sam.PORT.PINCFG0_19.Get()
+	case 20:
+		return sam.PORT.PINCFG0_20.Get()
+	case 21:
+		return sam.PORT.PINCFG0_21.Get()
+	case 22:
+		return sam.PORT.PINCFG0_22.Get()
+	case 23:
+		return sam.PORT.PINCFG0_23.Get()
+	case 24:
+		return sam.PORT.PINCFG0_24.Get()
+	case 25:
+		return sam.PORT.PINCFG0_25.Get()
+	case 26:
+		return sam.PORT.PINCFG0_26.Get()
+	case 27:
+		return sam.PORT.PINCFG0_27.Get()
+	case 28:
+		return sam.PORT.PINCFG0_28.Get()
+	case 29:
+		return sam.PORT.PINCFG0_29.Get()
+	case 30:
+		return sam.PORT.PINCFG0_30.Get()
+	case 31:
+		return sam.PORT.PINCFG0_31.Get()
+	case 32: // PB00
+		return uint8(sam.PORT.PINCFG1_0.Get()>>0) & 0xff
+	case 33: // PB01
+		return uint8(sam.PORT.PINCFG1_0.Get()>>8) & 0xff
+	case 34: // PB02
+		return uint8(sam.PORT.PINCFG1_0.Get()>>16) & 0xff
+	case 35: // PB03
+		return uint8(sam.PORT.PINCFG1_0.Get()>>24) & 0xff
+	case 37: // PB04
+		return uint8(sam.PORT.PINCFG1_4.Get()>>0) & 0xff
+	case 38: // PB05
+		return uint8(sam.PORT.PINCFG1_4.Get()>>8) & 0xff
+	case 39: // PB06
+		return uint8(sam.PORT.PINCFG1_4.Get()>>16) & 0xff
+	case 40: // PB07
+		return uint8(sam.PORT.PINCFG1_4.Get()>>24) & 0xff
+	case 41: // PB08
+		return uint8(sam.PORT.PINCFG1_8.Get()>>0) & 0xff
+	case 42: // PB09
+		return uint8(sam.PORT.PINCFG1_8.Get()>>8) & 0xff
+	case 43: // PB10
+		return uint8(sam.PORT.PINCFG1_8.Get()>>16) & 0xff
+	case 44: // PB11
+		return uint8(sam.PORT.PINCFG1_8.Get()>>24) & 0xff
+	case 45: // PB12
+		return uint8(sam.PORT.PINCFG1_12.Get()>>0) & 0xff
+	case 46: // PB13
+		return uint8(sam.PORT.PINCFG1_12.Get()>>8) & 0xff
+	case 47: // PB14
+		return uint8(sam.PORT.PINCFG1_12.Get()>>16) & 0xff
+	case 48: // PB15
+		return uint8(sam.PORT.PINCFG1_12.Get()>>24) & 0xff
+	case 49: // PB16
+		return uint8(sam.PORT.PINCFG1_16.Get()>>0) & 0xff
+	case 50: // PB17
+		return uint8(sam.PORT.PINCFG1_16.Get()>>8) & 0xff
+	case 51: // PB18
+		return uint8(sam.PORT.PINCFG1_16.Get()>>16) & 0xff
+	case 52: // PB19
+		return uint8(sam.PORT.PINCFG1_16.Get()>>24) & 0xff
+	case 53: // PB20
+		return uint8(sam.PORT.PINCFG1_20.Get()>>0) & 0xff
+	case 54: // PB21
+		return uint8(sam.PORT.PINCFG1_20.Get()>>8) & 0xff
+	case 55: // PB22
+		return uint8(sam.PORT.PINCFG1_20.Get()>>16) & 0xff
+	case 56: // PB23
+		return uint8(sam.PORT.PINCFG1_20.Get()>>24) & 0xff
+	case 57: // PB24
+		return uint8(sam.PORT.PINCFG1_24.Get()>>0) & 0xff
+	case 58: // PB25
+		return uint8(sam.PORT.PINCFG1_24.Get()>>8) & 0xff
+	case 59: // PB26
+		return uint8(sam.PORT.PINCFG1_24.Get()>>16) & 0xff
+	case 60: // PB27
+		return uint8(sam.PORT.PINCFG1_24.Get()>>24) & 0xff
+	case 61: // PB28
+		return uint8(sam.PORT.PINCFG1_28.Get()>>0) & 0xff
+	case 62: // PB29
+		return uint8(sam.PORT.PINCFG1_28.Get()>>8) & 0xff
+	case 63: // PB30
+		return uint8(sam.PORT.PINCFG1_28.Get()>>16) & 0xff
+	case 64: // PB31
+		return uint8(sam.PORT.PINCFG1_28.Get()>>24) & 0xff
+	default:
+		return 0
+	}
+}
+
+// setPinCfg sets the value for the correct PINCFG register for this pin.
+func (p Pin) setPinCfg(val uint8) {
+	switch p {
+	case 0:
+		sam.PORT.PINCFG0_0.Set(val)
+	case 1:
+		sam.PORT.PINCFG0_1.Set(val)
+	case 2:
+		sam.PORT.PINCFG0_2.Set(val)
+	case 3:
+		sam.PORT.PINCFG0_3.Set(val)
+	case 4:
+		sam.PORT.PINCFG0_4.Set(val)
+	case 5:
+		sam.PORT.PINCFG0_5.Set(val)
+	case 6:
+		sam.PORT.PINCFG0_6.Set(val)
+	case 7:
+		sam.PORT.PINCFG0_7.Set(val)
+	case 8:
+		sam.PORT.PINCFG0_8.Set(val)
+	case 9:
+		sam.PORT.PINCFG0_9.Set(val)
+	case 10:
+		sam.PORT.PINCFG0_10.Set(val)
+	case 11:
+		sam.PORT.PINCFG0_11.Set(val)
+	case 12:
+		sam.PORT.PINCFG0_12.Set(val)
+	case 13:
+		sam.PORT.PINCFG0_13.Set(val)
+	case 14:
+		sam.PORT.PINCFG0_14.Set(val)
+	case 15:
+		sam.PORT.PINCFG0_15.Set(val)
+	case 16:
+		sam.PORT.PINCFG0_16.Set(val)
+	case 17:
+		sam.PORT.PINCFG0_17.Set(val)
+	case 18:
+		sam.PORT.PINCFG0_18.Set(val)
+	case 19:
+		sam.PORT.PINCFG0_19.Set(val)
+	case 20:
+		sam.PORT.PINCFG0_20.Set(val)
+	case 21:
+		sam.PORT.PINCFG0_21.Set(val)
+	case 22:
+		sam.PORT.PINCFG0_22.Set(val)
+	case 23:
+		sam.PORT.PINCFG0_23.Set(val)
+	case 24:
+		sam.PORT.PINCFG0_24.Set(val)
+	case 25:
+		sam.PORT.PINCFG0_25.Set(val)
+	case 26:
+		sam.PORT.PINCFG0_26.Set(val)
+	case 27:
+		sam.PORT.PINCFG0_27.Set(val)
+	case 28:
+		sam.PORT.PINCFG0_28.Set(val)
+	case 29:
+		sam.PORT.PINCFG0_29.Set(val)
+	case 30:
+		sam.PORT.PINCFG0_30.Set(val)
+	case 31:
+		sam.PORT.PINCFG0_31.Set(val)
+	case 32: // PB00
+		sam.PORT.PINCFG1_0.Set(sam.PORT.PINCFG1_0.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 33: // PB01
+		sam.PORT.PINCFG1_0.Set(sam.PORT.PINCFG1_0.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 34: // PB02
+		sam.PORT.PINCFG1_0.Set(sam.PORT.PINCFG1_0.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 35: // PB03
+		sam.PORT.PINCFG1_0.Set(sam.PORT.PINCFG1_0.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 36: // PB04
+		sam.PORT.PINCFG1_4.Set(sam.PORT.PINCFG1_4.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 37: // PB05
+		sam.PORT.PINCFG1_4.Set(sam.PORT.PINCFG1_4.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 38: // PB06
+		sam.PORT.PINCFG1_4.Set(sam.PORT.PINCFG1_4.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 39: // PB07
+		sam.PORT.PINCFG1_4.Set(sam.PORT.PINCFG1_4.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 40: // PB08
+		sam.PORT.PINCFG1_8.Set(sam.PORT.PINCFG1_8.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 41: // PB09
+		sam.PORT.PINCFG1_8.Set(sam.PORT.PINCFG1_8.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 42: // PB10
+		sam.PORT.PINCFG1_8.Set(sam.PORT.PINCFG1_8.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 43: // PB11
+		sam.PORT.PINCFG1_8.Set(sam.PORT.PINCFG1_8.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 44: // PB12
+		sam.PORT.PINCFG1_12.Set(sam.PORT.PINCFG1_12.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 45: // PB13
+		sam.PORT.PINCFG1_12.Set(sam.PORT.PINCFG1_12.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 46: // PB14
+		sam.PORT.PINCFG1_12.Set(sam.PORT.PINCFG1_12.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 47: // PB15
+		sam.PORT.PINCFG1_12.Set(sam.PORT.PINCFG1_12.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 48: // PB16
+		sam.PORT.PINCFG1_16.Set(sam.PORT.PINCFG1_16.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 49: // PB17
+		sam.PORT.PINCFG1_16.Set(sam.PORT.PINCFG1_16.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 50: // PB18
+		sam.PORT.PINCFG1_16.Set(sam.PORT.PINCFG1_16.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 51: // PB19
+		sam.PORT.PINCFG1_16.Set(sam.PORT.PINCFG1_16.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 52: // PB20
+		sam.PORT.PINCFG1_20.Set(sam.PORT.PINCFG1_20.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 53: // PB21
+		sam.PORT.PINCFG1_20.Set(sam.PORT.PINCFG1_20.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 54: // PB22
+		sam.PORT.PINCFG1_20.Set(sam.PORT.PINCFG1_20.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 55: // PB23
+		sam.PORT.PINCFG1_20.Set(sam.PORT.PINCFG1_20.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 56: // PB24
+		sam.PORT.PINCFG1_24.Set(sam.PORT.PINCFG1_24.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 57: // PB25
+		sam.PORT.PINCFG1_24.Set(sam.PORT.PINCFG1_24.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 58: // PB26
+		sam.PORT.PINCFG1_24.Set(sam.PORT.PINCFG1_24.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 59: // PB27
+		sam.PORT.PINCFG1_24.Set(sam.PORT.PINCFG1_24.Get()&^(0xff<<24) | (uint32(val) << 24))
+	case 60: // PB28
+		sam.PORT.PINCFG1_28.Set(sam.PORT.PINCFG1_28.Get()&^(0xff<<0) | (uint32(val) << 0))
+	case 61: // PB29
+		sam.PORT.PINCFG1_28.Set(sam.PORT.PINCFG1_28.Get()&^(0xff<<8) | (uint32(val) << 8))
+	case 62: // PB30
+		sam.PORT.PINCFG1_28.Set(sam.PORT.PINCFG1_28.Get()&^(0xff<<16) | (uint32(val) << 16))
+	case 63: // PB31
+		sam.PORT.PINCFG1_28.Set(sam.PORT.PINCFG1_28.Get()&^(0xff<<24) | (uint32(val) << 24))
+	}
+}

src/machine/machine_attiny.go

@@ -7,21 +7,21 @@ import (
 )
 
 // Configure sets the pin to input or output.
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
-	if config.Mode == GPIO_OUTPUT { // set output bit
+	if config.Mode == PinOutput { // set output bit
-		avr.DDRB.SetBits(1 << p.Pin)
+		avr.DDRB.SetBits(1 << uint8(p))
 	} else { // configure input: clear output bit
-		avr.DDRB.ClearBits(1 << p.Pin)
+		avr.DDRB.ClearBits(1 << uint8(p))
 	}
 }
 
-func (p GPIO) getPortMask() (*avr.Register8, uint8) {
+func (p Pin) getPortMask() (*avr.Register8, uint8) {
-	return avr.PORTB, 1 << p.Pin
+	return avr.PORTB, 1 << uint8(p)
 }
 
 // Get returns the current value of a GPIO pin.
-func (p GPIO) Get() bool {
+func (p Pin) Get() bool {
-	val := avr.PINB.Get() & (1 << p.Pin)
+	val := avr.PINB.Get() & (1 << uint8(p))
 	return (val > 0)
 }
 

src/machine/machine_avr.go

@@ -6,15 +6,15 @@ import (
 	"device/avr"
 )
 
-type GPIOMode uint8
+type PinMode uint8
 
 const (
-	GPIO_INPUT = iota
+	PinInput PinMode = iota
-	GPIO_OUTPUT
+	PinOutput
 )
 
 // Set changes the value of the GPIO pin. The pin must be configured as output.
-func (p GPIO) Set(value bool) {
+func (p Pin) Set(value bool) {
 	if value { // set bits
 		port, mask := p.PortMaskSet()
 		port.Set(mask)
@@ -30,7 +30,7 @@ func (p GPIO) Set(value bool) {
 // Warning: there are no separate pin set/clear registers on the AVR. The
 // returned mask is only valid as long as no other pin in the same port has been
 // changed.
-func (p GPIO) PortMaskSet() (*avr.Register8, uint8) {
+func (p Pin) PortMaskSet() (*avr.Register8, uint8) {
 	port, mask := p.getPortMask()
 	return port, port.Get() | mask
 }
@@ -41,7 +41,7 @@ func (p GPIO) PortMaskSet() (*avr.Register8, uint8) {
 // Warning: there are no separate pin set/clear registers on the AVR. The
 // returned mask is only valid as long as no other pin in the same port has been
 // changed.
-func (p GPIO) PortMaskClear() (*avr.Register8, uint8) {
+func (p Pin) PortMaskClear() (*avr.Register8, uint8) {
 	port, mask := p.getPortMask()
 	return port, port.Get() &^ mask
 }
@@ -68,13 +68,13 @@ func (a ADC) Get() uint16 {
 	// set the ADLAR bit (left-adjusted result) to get a value scaled to 16
 	// bits. This has the same effect as shifting the return value left by 6
 	// bits.
-	avr.ADMUX.Set(avr.ADMUX_REFS0 | avr.ADMUX_ADLAR | (a.Pin & 0x07))
+	avr.ADMUX.Set(avr.ADMUX_REFS0 | avr.ADMUX_ADLAR | (uint8(a.Pin) & 0x07))
 
 	// start the conversion
 	avr.ADCSRA.SetBits(avr.ADCSRA_ADSC)
 
 	// ADSC is cleared when the conversion finishes
-	for ok := true; ok; ok = (avr.ADCSRA.Get() & avr.ADCSRA_ADSC) > 0 {
+	for ok := true; ok; ok = avr.ADCSRA.HasBits(avr.ADCSRA_ADSC) {
 	}
 
 	return uint16(avr.ADCL.Get()) | uint16(avr.ADCH.Get())<<8

src/machine/machine_dummy.go

@@ -4,37 +4,37 @@ package machine
 
 // Dummy machine package, filled with no-ops.
 
-type GPIOMode uint8
+type PinMode uint8
 
 const (
-	GPIO_INPUT = iota
+	PinInput PinMode = iota
-	GPIO_OUTPUT
+	PinOutput
 )
 
 // Fake LED numbers, for testing.
 const (
-	LED  = LED1
+	LED  Pin = LED1
-	LED1 = 0
+	LED1 Pin = 0
-	LED2 = 0
+	LED2 Pin = 0
-	LED3 = 0
+	LED3 Pin = 0
-	LED4 = 0
+	LED4 Pin = 0
 )
 
 // Fake button numbers, for testing.
 const (
-	BUTTON  = BUTTON1
+	BUTTON  Pin = BUTTON1
-	BUTTON1 = 0
+	BUTTON1 Pin = 0
-	BUTTON2 = 0
+	BUTTON2 Pin = 0
-	BUTTON3 = 0
+	BUTTON3 Pin = 0
-	BUTTON4 = 0
+	BUTTON4 Pin = 0
 )
 
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
 }
 
-func (p GPIO) Set(value bool) {
+func (p Pin) Set(value bool) {
 }
 
-func (p GPIO) Get() bool {
+func (p Pin) Get() bool {
 	return false
 }

src/machine/machine_nrf.go

@@ -7,51 +7,51 @@ import (
 	"device/nrf"
 )
 
-type GPIOMode uint8
+type PinMode uint8
 
 const (
-	GPIO_INPUT          = (nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) | (nrf.GPIO_PIN_CNF_INPUT_Connect << nrf.GPIO_PIN_CNF_INPUT_Pos)
+	PinInput         PinMode = (nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) | (nrf.GPIO_PIN_CNF_INPUT_Connect << nrf.GPIO_PIN_CNF_INPUT_Pos)
-	GPIO_INPUT_PULLUP   = GPIO_INPUT | (nrf.GPIO_PIN_CNF_PULL_Pullup << nrf.GPIO_PIN_CNF_PULL_Pos)
+	PinInputPullup   PinMode = PinInput | (nrf.GPIO_PIN_CNF_PULL_Pullup << nrf.GPIO_PIN_CNF_PULL_Pos)
-	GPIO_INPUT_PULLDOWN = GPIO_INPUT | (nrf.GPIO_PIN_CNF_PULL_Pulldown << nrf.GPIO_PIN_CNF_PULL_Pos)
+	PinInputPulldown PinMode = PinOutput | (nrf.GPIO_PIN_CNF_PULL_Pulldown << nrf.GPIO_PIN_CNF_PULL_Pos)
-	GPIO_OUTPUT         = (nrf.GPIO_PIN_CNF_DIR_Output << nrf.GPIO_PIN_CNF_DIR_Pos) | (nrf.GPIO_PIN_CNF_INPUT_Disconnect << nrf.GPIO_PIN_CNF_INPUT_Pos)
+	PinOutput        PinMode = (nrf.GPIO_PIN_CNF_DIR_Output << nrf.GPIO_PIN_CNF_DIR_Pos) | (nrf.GPIO_PIN_CNF_INPUT_Disconnect << nrf.GPIO_PIN_CNF_INPUT_Pos)
 )
 
 // Configure this pin with the given configuration.
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
 	cfg := config.Mode | nrf.GPIO_PIN_CNF_DRIVE_S0S1 | nrf.GPIO_PIN_CNF_SENSE_Disabled
 	port, pin := p.getPortPin()
-	port.PIN_CNF[pin] = nrf.RegValue(cfg)
+	port.PIN_CNF[pin].Set(uint32(cfg))
 }
 
 // Set the pin to high or low.
 // Warning: only use this on an output pin!
-func (p GPIO) Set(high bool) {
+func (p Pin) Set(high bool) {
 	port, pin := p.getPortPin()
 	if high {
-		port.OUTSET = 1 << pin
+		port.OUTSET.Set(1 << pin)
 	} else {
-		port.OUTCLR = 1 << pin
+		port.OUTCLR.Set(1 << pin)
 	}
 }
 
 // Return the register and mask to enable a given GPIO pin. This can be used to
 // implement bit-banged drivers.
-func (p GPIO) PortMaskSet() (*uint32, uint32) {
+func (p Pin) PortMaskSet() (*uint32, uint32) {
 	port, pin := p.getPortPin()
-	return (*uint32)(&port.OUTSET), 1 << pin
+	return &port.OUTSET.Reg, 1 << pin
 }
 
 // Return the register and mask to disable a given port. This can be used to
 // implement bit-banged drivers.
-func (p GPIO) PortMaskClear() (*uint32, uint32) {
+func (p Pin) PortMaskClear() (*uint32, uint32) {
 	port, pin := p.getPortPin()
-	return (*uint32)(&port.OUTCLR), 1 << pin
+	return &port.OUTCLR.Reg, 1 << pin
 }
 
 // Get returns the current value of a GPIO pin.
-func (p GPIO) Get() bool {
+func (p Pin) Get() bool {
 	port, pin := p.getPortPin()
-	return (port.IN>>pin)&1 != 0
+	return (port.IN.Get()>>pin)&1 != 0
 }
 
 // UART on the NRF.
@@ -77,10 +77,10 @@ func (uart UART) Configure(config UARTConfig) {
 	// Set TX and RX pins from board.
 	uart.setPins(UART_TX_PIN, UART_RX_PIN)
 
-	nrf.UART0.ENABLE = nrf.UART_ENABLE_ENABLE_Enabled
+	nrf.UART0.ENABLE.Set(nrf.UART_ENABLE_ENABLE_Enabled)
-	nrf.UART0.TASKS_STARTTX = 1
+	nrf.UART0.TASKS_STARTTX.Set(1)
-	nrf.UART0.TASKS_STARTRX = 1
+	nrf.UART0.TASKS_STARTRX.Set(1)
-	nrf.UART0.INTENSET = nrf.UART_INTENSET_RXDRDY_Msk
+	nrf.UART0.INTENSET.Set(nrf.UART_INTENSET_RXDRDY_Msk)
 
 	// Enable RX IRQ.
 	arm.SetPriority(nrf.IRQ_UART0, 0xc0) // low priority
@@ -99,22 +99,22 @@ func (uart UART) SetBaudRate(br uint32) {
 	// https://devzone.nordicsemi.com/f/nordic-q-a/391/uart-baudrate-register-values/2046#2046
 	rate := uint32((uint64(br/400)*uint64(400*0xffffffff/16000000) + 0x800) & 0xffffff000)
 
-	nrf.UART0.BAUDRATE = nrf.RegValue(rate)
+	nrf.UART0.BAUDRATE.Set(rate)
 }
 
 // WriteByte writes a byte of data to the UART.
 func (uart UART) WriteByte(c byte) error {
-	nrf.UART0.EVENTS_TXDRDY = 0
+	nrf.UART0.EVENTS_TXDRDY.Set(0)
-	nrf.UART0.TXD = nrf.RegValue(c)
+	nrf.UART0.TXD.Set(uint32(c))
-	for nrf.UART0.EVENTS_TXDRDY == 0 {
+	for nrf.UART0.EVENTS_TXDRDY.Get() == 0 {
 	}
 	return nil
 }
 
 func (uart UART) handleInterrupt() {
-	if nrf.UART0.EVENTS_RXDRDY != 0 {
+	if nrf.UART0.EVENTS_RXDRDY.Get() != 0 {
-		uart.Receive(byte(nrf.UART0.RXD))
+		uart.Receive(byte(nrf.UART0.RXD.Get()))
-		nrf.UART0.EVENTS_RXDRDY = 0x0
+		nrf.UART0.EVENTS_RXDRDY.Set(0x0)
 	}
 }
 
@@ -132,8 +132,8 @@ var (
 // I2CConfig is used to store config info for I2C.
 type I2CConfig struct {
 	Frequency uint32
-	SCL       uint8
+	SCL       Pin
-	SDA       uint8
+	SDA       Pin
 }
 
 // Configure is intended to setup the I2C interface.
@@ -149,27 +149,27 @@ func (i2c I2C) Configure(config I2CConfig) {
 	}
 
 	// do config
-	sclPort, sclPin := GPIO{config.SCL}.getPortPin()
+	sclPort, sclPin := config.SCL.getPortPin()
-	sclPort.PIN_CNF[sclPin] = (nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) |
+	sclPort.PIN_CNF[sclPin].Set((nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) |
 		(nrf.GPIO_PIN_CNF_INPUT_Connect << nrf.GPIO_PIN_CNF_INPUT_Pos) |
 		(nrf.GPIO_PIN_CNF_PULL_Pullup << nrf.GPIO_PIN_CNF_PULL_Pos) |
 		(nrf.GPIO_PIN_CNF_DRIVE_S0D1 << nrf.GPIO_PIN_CNF_DRIVE_Pos) |
-		(nrf.GPIO_PIN_CNF_SENSE_Disabled << nrf.GPIO_PIN_CNF_SENSE_Pos)
+		(nrf.GPIO_PIN_CNF_SENSE_Disabled << nrf.GPIO_PIN_CNF_SENSE_Pos))
 
-	sdaPort, sdaPin := GPIO{config.SDA}.getPortPin()
+	sdaPort, sdaPin := config.SDA.getPortPin()
-	sdaPort.PIN_CNF[sdaPin] = (nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) |
+	sdaPort.PIN_CNF[sdaPin].Set((nrf.GPIO_PIN_CNF_DIR_Input << nrf.GPIO_PIN_CNF_DIR_Pos) |
 		(nrf.GPIO_PIN_CNF_INPUT_Connect << nrf.GPIO_PIN_CNF_INPUT_Pos) |
 		(nrf.GPIO_PIN_CNF_PULL_Pullup << nrf.GPIO_PIN_CNF_PULL_Pos) |
 		(nrf.GPIO_PIN_CNF_DRIVE_S0D1 << nrf.GPIO_PIN_CNF_DRIVE_Pos) |
-		(nrf.GPIO_PIN_CNF_SENSE_Disabled << nrf.GPIO_PIN_CNF_SENSE_Pos)
+		(nrf.GPIO_PIN_CNF_SENSE_Disabled << nrf.GPIO_PIN_CNF_SENSE_Pos))
 
 	if config.Frequency == TWI_FREQ_400KHZ {
-		i2c.Bus.FREQUENCY = nrf.TWI_FREQUENCY_FREQUENCY_K400
+		i2c.Bus.FREQUENCY.Set(nrf.TWI_FREQUENCY_FREQUENCY_K400)
 	} else {
-		i2c.Bus.FREQUENCY = nrf.TWI_FREQUENCY_FREQUENCY_K100
+		i2c.Bus.FREQUENCY.Set(nrf.TWI_FREQUENCY_FREQUENCY_K100)
 	}
 
-	i2c.Bus.ENABLE = nrf.TWI_ENABLE_ENABLE_Enabled
+	i2c.Bus.ENABLE.Set(nrf.TWI_ENABLE_ENABLE_Enabled)
 	i2c.setPins(config.SCL, config.SDA)
 }
 
@@ -177,28 +177,28 @@ func (i2c I2C) Configure(config I2CConfig) {
 // It clocks out the given address, writes the bytes in w, reads back len(r)
 // bytes and stores them in r, and generates a stop condition on the bus.
 func (i2c I2C) Tx(addr uint16, w, r []byte) error {
-	i2c.Bus.ADDRESS = nrf.RegValue(addr)
+	i2c.Bus.ADDRESS.Set(uint32(addr))
 	if len(w) != 0 {
-		i2c.Bus.TASKS_STARTTX = 1 // start transmission for writing
+		i2c.Bus.TASKS_STARTTX.Set(1) // start transmission for writing
 		for _, b := range w {
 			i2c.writeByte(b)
 		}
 	}
 	if len(r) != 0 {
 		// To trigger suspend task when a byte is received
-		i2c.Bus.SHORTS = nrf.TWI_SHORTS_BB_SUSPEND
+		i2c.Bus.SHORTS.Set(nrf.TWI_SHORTS_BB_SUSPEND)
-		i2c.Bus.TASKS_STARTRX = 1 // re-start transmission for reading
+		i2c.Bus.TASKS_STARTRX.Set(1) // re-start transmission for reading
-		for i := range r {        // read each char
+		for i := range r {           // read each char
 			if i+1 == len(r) {
 				// To trigger stop task when last byte is received, set before resume task.
-				i2c.Bus.SHORTS = nrf.TWI_SHORTS_BB_STOP
+				i2c.Bus.SHORTS.Set(nrf.TWI_SHORTS_BB_STOP)
 			}
-			i2c.Bus.TASKS_RESUME = 1 // re-start transmission for reading
+			i2c.Bus.TASKS_RESUME.Set(1) // re-start transmission for reading
 			r[i] = i2c.readByte()
 		}
 	}
 	i2c.signalStop()
-	i2c.Bus.SHORTS = nrf.TWI_SHORTS_BB_SUSPEND_Disabled
+	i2c.Bus.SHORTS.Set(nrf.TWI_SHORTS_BB_SUSPEND_Disabled)
 	return nil
 }
 
@@ -206,26 +206,26 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 // it must generate a stop condition after the next character is retrieved when
 // reading.
 func (i2c I2C) signalStop() {
-	i2c.Bus.TASKS_STOP = 1
+	i2c.Bus.TASKS_STOP.Set(1)
-	for i2c.Bus.EVENTS_STOPPED == 0 {
+	for i2c.Bus.EVENTS_STOPPED.Get() == 0 {
 	}
-	i2c.Bus.EVENTS_STOPPED = 0
+	i2c.Bus.EVENTS_STOPPED.Set(0)
 }
 
 // writeByte writes a single byte to the I2C bus.
 func (i2c I2C) writeByte(data byte) {
-	i2c.Bus.TXD = nrf.RegValue(data)
+	i2c.Bus.TXD.Set(uint32(data))
-	for i2c.Bus.EVENTS_TXDSENT == 0 {
+	for i2c.Bus.EVENTS_TXDSENT.Get() == 0 {
 	}
-	i2c.Bus.EVENTS_TXDSENT = 0
+	i2c.Bus.EVENTS_TXDSENT.Set(0)
 }
 
 // readByte reads a single byte from the I2C bus.
 func (i2c I2C) readByte() byte {
-	for i2c.Bus.EVENTS_RXDREADY == 0 {
+	for i2c.Bus.EVENTS_RXDREADY.Get() == 0 {
 	}
-	i2c.Bus.EVENTS_RXDREADY = 0
+	i2c.Bus.EVENTS_RXDREADY.Set(0)
-	return byte(i2c.Bus.RXD)
+	return byte(i2c.Bus.RXD.Get())
 }
 
 // SPI on the NRF.
@@ -242,9 +242,9 @@ var (
 // SPIConfig is used to store config info for SPI.
 type SPIConfig struct {
 	Frequency uint32
-	SCK       uint8
+	SCK       Pin
-	MOSI      uint8
+	MOSI      Pin
-	MISO      uint8
+	MISO      Pin
 	LSBFirst  bool
 	Mode      uint8
 }
@@ -252,7 +252,7 @@ type SPIConfig struct {
 // Configure is intended to setup the SPI interface.
 func (spi SPI) Configure(config SPIConfig) {
 	// Disable bus to configure it
-	spi.Bus.ENABLE = nrf.SPI_ENABLE_ENABLE_Disabled
+	spi.Bus.ENABLE.Set(nrf.SPI_ENABLE_ENABLE_Disabled)
 
 	// set frequency
 	var freq uint32
@@ -275,7 +275,7 @@ func (spi SPI) Configure(config SPIConfig) {
 	default:
 		freq = nrf.SPI_FREQUENCY_FREQUENCY_K500
 	}
-	spi.Bus.FREQUENCY = nrf.RegValue(freq)
+	spi.Bus.FREQUENCY.Set(freq)
 
 	var conf uint32
 
@@ -302,22 +302,22 @@ func (spi SPI) Configure(config SPIConfig) {
 		conf &^= (nrf.SPI_CONFIG_CPOL_ActiveHigh << nrf.SPI_CONFIG_CPOL_Pos)
 		conf &^= (nrf.SPI_CONFIG_CPHA_Leading << nrf.SPI_CONFIG_CPHA_Pos)
 	}
-	spi.Bus.CONFIG = nrf.RegValue(conf)
+	spi.Bus.CONFIG.Set(conf)
 
 	// set pins
 	spi.setPins(config.SCK, config.MOSI, config.MISO)
 
 	// Re-enable bus now that it is configured.
-	spi.Bus.ENABLE = nrf.SPI_ENABLE_ENABLE_Enabled
+	spi.Bus.ENABLE.Set(nrf.SPI_ENABLE_ENABLE_Enabled)
 }
 
 // Transfer writes/reads a single byte using the SPI interface.
 func (spi SPI) Transfer(w byte) (byte, error) {
-	spi.Bus.TXD = nrf.RegValue(w)
+	spi.Bus.TXD.Set(uint32(w))
-	for spi.Bus.EVENTS_READY == 0 {
+	for spi.Bus.EVENTS_READY.Get() == 0 {
 	}
-	r := spi.Bus.RXD
+	r := spi.Bus.RXD.Get()
-	spi.Bus.EVENTS_READY = 0
+	spi.Bus.EVENTS_READY.Set(0)
 
 	// TODO: handle SPI errors
 	return byte(r), nil

src/machine/machine_nrf51.go

@@ -9,13 +9,13 @@ import (
 const CPU_FREQUENCY = 16000000
 
 // Get peripheral and pin number for this GPIO pin.
-func (p GPIO) getPortPin() (*nrf.GPIO_Type, uint8) {
+func (p Pin) getPortPin() (*nrf.GPIO_Type, uint32) {
-	return nrf.GPIO, p.Pin
+	return nrf.GPIO, uint32(p)
 }
 
-func (uart UART) setPins(tx, rx uint32) {
+func (uart UART) setPins(tx, rx Pin) {
-	nrf.UART0.PSELTXD = nrf.RegValue(tx)
+	nrf.UART0.PSELTXD.Set(uint32(tx))
-	nrf.UART0.PSELRXD = nrf.RegValue(rx)
+	nrf.UART0.PSELRXD.Set(uint32(rx))
 }
 
 //go:export UART0_IRQHandler
@@ -23,13 +23,13 @@ func handleUART0() {
 	UART0.handleInterrupt()
 }
 
-func (i2c I2C) setPins(scl, sda uint8) {
+func (i2c I2C) setPins(scl, sda Pin) {
-	i2c.Bus.PSELSCL = nrf.RegValue(scl)
+	i2c.Bus.PSELSCL.Set(uint32(scl))
-	i2c.Bus.PSELSDA = nrf.RegValue(sda)
+	i2c.Bus.PSELSDA.Set(uint32(sda))
 }
 
 // SPI
-func (spi SPI) setPins(sck, mosi, miso uint8) {
+func (spi SPI) setPins(sck, mosi, miso Pin) {
 	if sck == 0 {
 		sck = SPI0_SCK_PIN
 	}
@@ -39,7 +39,7 @@ func (spi SPI) setPins(sck, mosi, miso uint8) {
 	if miso == 0 {
 		miso = SPI0_MISO_PIN
 	}
-	spi.Bus.PSELSCK = nrf.RegValue(sck)
+	spi.Bus.PSELSCK.Set(uint32(sck))
-	spi.Bus.PSELMOSI = nrf.RegValue(mosi)
+	spi.Bus.PSELMOSI.Set(uint32(mosi))
-	spi.Bus.PSELMISO = nrf.RegValue(miso)
+	spi.Bus.PSELMISO.Set(uint32(miso))
 }

src/machine/machine_nrf52.go

@@ -10,13 +10,13 @@ import (
 const CPU_FREQUENCY = 64000000
 
 // Get peripheral and pin number for this GPIO pin.
-func (p GPIO) getPortPin() (*nrf.GPIO_Type, uint8) {
+func (p Pin) getPortPin() (*nrf.GPIO_Type, uint32) {
-	return nrf.P0, p.Pin
+	return nrf.P0, uint32(p)
 }
 
-func (uart UART) setPins(tx, rx uint32) {
+func (uart UART) setPins(tx, rx Pin) {
-	nrf.UART0.PSELTXD = nrf.RegValue(tx)
+	nrf.UART0.PSELTXD.Set(uint32(tx))
-	nrf.UART0.PSELRXD = nrf.RegValue(rx)
+	nrf.UART0.PSELRXD.Set(uint32(rx))
 }
 
 //go:export UARTE0_UART0_IRQHandler
@@ -24,13 +24,13 @@ func handleUART0() {
 	UART0.handleInterrupt()
 }
 
-func (i2c I2C) setPins(scl, sda uint8) {
+func (i2c I2C) setPins(scl, sda Pin) {
-	i2c.Bus.PSELSCL = nrf.RegValue(scl)
+	i2c.Bus.PSELSCL.Set(uint32(scl))
-	i2c.Bus.PSELSDA = nrf.RegValue(sda)
+	i2c.Bus.PSELSDA.Set(uint32(sda))
 }
 
 // SPI
-func (spi SPI) setPins(sck, mosi, miso uint8) {
+func (spi SPI) setPins(sck, mosi, miso Pin) {
 	if sck == 0 {
 		sck = SPI0_SCK_PIN
 	}
@@ -40,9 +40,9 @@ func (spi SPI) setPins(sck, mosi, miso uint8) {
 	if miso == 0 {
 		miso = SPI0_MISO_PIN
 	}
-	spi.Bus.PSEL.SCK = nrf.RegValue(sck)
+	spi.Bus.PSEL.SCK.Set(uint32(sck))
-	spi.Bus.PSEL.MOSI = nrf.RegValue(mosi)
+	spi.Bus.PSEL.MOSI.Set(uint32(mosi))
-	spi.Bus.PSEL.MISO = nrf.RegValue(miso)
+	spi.Bus.PSEL.MISO.Set(uint32(miso))
 }
 
 // InitADC initializes the registers needed for ADC.
@@ -89,53 +89,53 @@ func (a ADC) Get() uint16 {
 		return 0
 	}
 
-	nrf.SAADC.RESOLUTION = nrf.SAADC_RESOLUTION_VAL_12bit
+	nrf.SAADC.RESOLUTION.Set(nrf.SAADC_RESOLUTION_VAL_12bit)
 
 	// Enable ADC.
-	nrf.SAADC.ENABLE = (nrf.SAADC_ENABLE_ENABLE_Enabled << nrf.SAADC_ENABLE_ENABLE_Pos)
+	nrf.SAADC.ENABLE.Set(nrf.SAADC_ENABLE_ENABLE_Enabled << nrf.SAADC_ENABLE_ENABLE_Pos)
 	for i := 0; i < 8; i++ {
-		nrf.SAADC.CH[i].PSELN = nrf.SAADC_CH_PSELP_PSELP_NC
+		nrf.SAADC.CH[i].PSELN.Set(nrf.SAADC_CH_PSELP_PSELP_NC)
-		nrf.SAADC.CH[i].PSELP = nrf.SAADC_CH_PSELP_PSELP_NC
+		nrf.SAADC.CH[i].PSELP.Set(nrf.SAADC_CH_PSELP_PSELP_NC)
 	}
 
 	// Configure ADC.
-	nrf.SAADC.CH[0].CONFIG = ((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESP_Pos) & nrf.SAADC_CH_CONFIG_RESP_Msk) |
+	nrf.SAADC.CH[0].CONFIG.Set(((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESP_Pos) & nrf.SAADC_CH_CONFIG_RESP_Msk) |
 		((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESN_Pos) & nrf.SAADC_CH_CONFIG_RESN_Msk) |
 		((nrf.SAADC_CH_CONFIG_GAIN_Gain1_5 << nrf.SAADC_CH_CONFIG_GAIN_Pos) & nrf.SAADC_CH_CONFIG_GAIN_Msk) |
 		((nrf.SAADC_CH_CONFIG_REFSEL_Internal << nrf.SAADC_CH_CONFIG_REFSEL_Pos) & nrf.SAADC_CH_CONFIG_REFSEL_Msk) |
 		((nrf.SAADC_CH_CONFIG_TACQ_3us << nrf.SAADC_CH_CONFIG_TACQ_Pos) & nrf.SAADC_CH_CONFIG_TACQ_Msk) |
-		((nrf.SAADC_CH_CONFIG_MODE_SE << nrf.SAADC_CH_CONFIG_MODE_Pos) & nrf.SAADC_CH_CONFIG_MODE_Msk)
+		((nrf.SAADC_CH_CONFIG_MODE_SE << nrf.SAADC_CH_CONFIG_MODE_Pos) & nrf.SAADC_CH_CONFIG_MODE_Msk))
 
 	// Set pin to read.
-	nrf.SAADC.CH[0].PSELN = nrf.RegValue(pwmPin)
+	nrf.SAADC.CH[0].PSELN.Set(pwmPin)
-	nrf.SAADC.CH[0].PSELP = nrf.RegValue(pwmPin)
+	nrf.SAADC.CH[0].PSELP.Set(pwmPin)
 
 	// Destination for sample result.
-	nrf.SAADC.RESULT.PTR = nrf.RegValue(uintptr(unsafe.Pointer(&value)))
+	nrf.SAADC.RESULT.PTR.Set(uint32(uintptr(unsafe.Pointer(&value))))
-	nrf.SAADC.RESULT.MAXCNT = 1 // One sample
+	nrf.SAADC.RESULT.MAXCNT.Set(1) // One sample
 
 	// Start tasks.
-	nrf.SAADC.TASKS_START = 1
+	nrf.SAADC.TASKS_START.Set(1)
-	for nrf.SAADC.EVENTS_STARTED == 0 {
+	for nrf.SAADC.EVENTS_STARTED.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_STARTED = 0x00
+	nrf.SAADC.EVENTS_STARTED.Set(0x00)
 
 	// Start the sample task.
-	nrf.SAADC.TASKS_SAMPLE = 1
+	nrf.SAADC.TASKS_SAMPLE.Set(1)
 
 	// Wait until the sample task is done.
-	for nrf.SAADC.EVENTS_END == 0 {
+	for nrf.SAADC.EVENTS_END.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_END = 0x00
+	nrf.SAADC.EVENTS_END.Set(0x00)
 
 	// Stop the ADC
-	nrf.SAADC.TASKS_STOP = 1
+	nrf.SAADC.TASKS_STOP.Set(1)
-	for nrf.SAADC.EVENTS_STOPPED == 0 {
+	for nrf.SAADC.EVENTS_STOPPED.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_STOPPED = 0
+	nrf.SAADC.EVENTS_STOPPED.Set(0)
 
 	// Disable the ADC.
-	nrf.SAADC.ENABLE = (nrf.SAADC_ENABLE_ENABLE_Disabled << nrf.SAADC_ENABLE_ENABLE_Pos)
+	nrf.SAADC.ENABLE.Set(nrf.SAADC_ENABLE_ENABLE_Disabled << nrf.SAADC_ENABLE_ENABLE_Pos)
 
 	if value < 0 {
 		value = 0
@@ -170,21 +170,21 @@ func (pwm PWM) Set(value uint16) {
 
 			p := pwms[i]
 
-			p.PSEL.OUT[0] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[0].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[1] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[1].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[2] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[2].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[3] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[3].Set(uint32(pwm.Pin))
-			p.ENABLE = (nrf.PWM_ENABLE_ENABLE_Enabled << nrf.PWM_ENABLE_ENABLE_Pos)
+			p.ENABLE.Set(nrf.PWM_ENABLE_ENABLE_Enabled << nrf.PWM_ENABLE_ENABLE_Pos)
-			p.PRESCALER = nrf.PWM_PRESCALER_PRESCALER_DIV_2
+			p.PRESCALER.Set(nrf.PWM_PRESCALER_PRESCALER_DIV_2)
-			p.MODE = nrf.PWM_MODE_UPDOWN_Up
+			p.MODE.Set(nrf.PWM_MODE_UPDOWN_Up)
-			p.COUNTERTOP = 16384 // frequency
+			p.COUNTERTOP.Set(16384) // frequency
-			p.LOOP = 0
+			p.LOOP.Set(0)
-			p.DECODER = (nrf.PWM_DECODER_LOAD_Common << nrf.PWM_DECODER_LOAD_Pos) | (nrf.PWM_DECODER_MODE_RefreshCount << nrf.PWM_DECODER_MODE_Pos)
+			p.DECODER.Set((nrf.PWM_DECODER_LOAD_Common << nrf.PWM_DECODER_LOAD_Pos) | (nrf.PWM_DECODER_MODE_RefreshCount << nrf.PWM_DECODER_MODE_Pos))
-			p.SEQ[0].PTR = nrf.RegValue(uintptr(unsafe.Pointer(&pwmChannelSequence[i])))
+			p.SEQ[0].PTR.Set(uint32(uintptr(unsafe.Pointer(&pwmChannelSequence[i]))))
-			p.SEQ[0].CNT = 1
+			p.SEQ[0].CNT.Set(1)
-			p.SEQ[0].REFRESH = 1
+			p.SEQ[0].REFRESH.Set(1)
-			p.SEQ[0].ENDDELAY = 0
+			p.SEQ[0].ENDDELAY.Set(0)
-			p.TASKS_SEQSTART[0] = 1
+			p.TASKS_SEQSTART[0].Set(1)
 
 			break
 		}

src/machine/machine_nrf52840.go

@@ -10,17 +10,17 @@ import (
 const CPU_FREQUENCY = 64000000
 
 // Get peripheral and pin number for this GPIO pin.
-func (p GPIO) getPortPin() (*nrf.GPIO_Type, uint8) {
+func (p Pin) getPortPin() (*nrf.GPIO_Type, uint32) {
-	if p.Pin >= 32 {
+	if p >= 32 {
-		return nrf.P1, p.Pin - 32
+		return nrf.P1, uint32(p - 32)
 	} else {
-		return nrf.P0, p.Pin
+		return nrf.P0, uint32(p)
 	}
 }
 
-func (uart UART) setPins(tx, rx uint32) {
+func (uart UART) setPins(tx, rx Pin) {
-	nrf.UART0.PSEL.TXD = nrf.RegValue(tx)
+	nrf.UART0.PSEL.TXD.Set(uint32(tx))
-	nrf.UART0.PSEL.RXD = nrf.RegValue(rx)
+	nrf.UART0.PSEL.RXD.Set(uint32(rx))
 }
 
 //go:export UARTE0_UART0_IRQHandler
@@ -28,13 +28,13 @@ func handleUART0() {
 	UART0.handleInterrupt()
 }
 
-func (i2c I2C) setPins(scl, sda uint8) {
+func (i2c I2C) setPins(scl, sda Pin) {
-	i2c.Bus.PSEL.SCL = nrf.RegValue(scl)
+	i2c.Bus.PSEL.SCL.Set(uint32(scl))
-	i2c.Bus.PSEL.SDA = nrf.RegValue(sda)
+	i2c.Bus.PSEL.SDA.Set(uint32(sda))
 }
 
 // SPI
-func (spi SPI) setPins(sck, mosi, miso uint8) {
+func (spi SPI) setPins(sck, mosi, miso Pin) {
 	if sck == 0 {
 		sck = SPI0_SCK_PIN
 	}
@@ -44,9 +44,9 @@ func (spi SPI) setPins(sck, mosi, miso uint8) {
 	if miso == 0 {
 		miso = SPI0_MISO_PIN
 	}
-	spi.Bus.PSEL.SCK = nrf.RegValue(sck)
+	spi.Bus.PSEL.SCK.Set(uint32(sck))
-	spi.Bus.PSEL.MOSI = nrf.RegValue(mosi)
+	spi.Bus.PSEL.MOSI.Set(uint32(mosi))
-	spi.Bus.PSEL.MISO = nrf.RegValue(miso)
+	spi.Bus.PSEL.MISO.Set(uint32(miso))
 }
 
 // InitADC initializes the registers needed for ADC.
@@ -93,53 +93,53 @@ func (a ADC) Get() uint16 {
 		return 0
 	}
 
-	nrf.SAADC.RESOLUTION = nrf.SAADC_RESOLUTION_VAL_12bit
+	nrf.SAADC.RESOLUTION.Set(nrf.SAADC_RESOLUTION_VAL_12bit)
 
 	// Enable ADC.
-	nrf.SAADC.ENABLE = (nrf.SAADC_ENABLE_ENABLE_Enabled << nrf.SAADC_ENABLE_ENABLE_Pos)
+	nrf.SAADC.ENABLE.Set(nrf.SAADC_ENABLE_ENABLE_Enabled << nrf.SAADC_ENABLE_ENABLE_Pos)
 	for i := 0; i < 8; i++ {
-		nrf.SAADC.CH[i].PSELN = nrf.SAADC_CH_PSELP_PSELP_NC
+		nrf.SAADC.CH[i].PSELN.Set(nrf.SAADC_CH_PSELP_PSELP_NC)
-		nrf.SAADC.CH[i].PSELP = nrf.SAADC_CH_PSELP_PSELP_NC
+		nrf.SAADC.CH[i].PSELP.Set(nrf.SAADC_CH_PSELP_PSELP_NC)
 	}
 
 	// Configure ADC.
-	nrf.SAADC.CH[0].CONFIG = ((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESP_Pos) & nrf.SAADC_CH_CONFIG_RESP_Msk) |
+	nrf.SAADC.CH[0].CONFIG.Set(((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESP_Pos) & nrf.SAADC_CH_CONFIG_RESP_Msk) |
 		((nrf.SAADC_CH_CONFIG_RESP_Bypass << nrf.SAADC_CH_CONFIG_RESN_Pos) & nrf.SAADC_CH_CONFIG_RESN_Msk) |
 		((nrf.SAADC_CH_CONFIG_GAIN_Gain1_5 << nrf.SAADC_CH_CONFIG_GAIN_Pos) & nrf.SAADC_CH_CONFIG_GAIN_Msk) |
 		((nrf.SAADC_CH_CONFIG_REFSEL_Internal << nrf.SAADC_CH_CONFIG_REFSEL_Pos) & nrf.SAADC_CH_CONFIG_REFSEL_Msk) |
 		((nrf.SAADC_CH_CONFIG_TACQ_3us << nrf.SAADC_CH_CONFIG_TACQ_Pos) & nrf.SAADC_CH_CONFIG_TACQ_Msk) |
-		((nrf.SAADC_CH_CONFIG_MODE_SE << nrf.SAADC_CH_CONFIG_MODE_Pos) & nrf.SAADC_CH_CONFIG_MODE_Msk)
+		((nrf.SAADC_CH_CONFIG_MODE_SE << nrf.SAADC_CH_CONFIG_MODE_Pos) & nrf.SAADC_CH_CONFIG_MODE_Msk))
 
 	// Set pin to read.
-	nrf.SAADC.CH[0].PSELN = nrf.RegValue(pwmPin)
+	nrf.SAADC.CH[0].PSELN.Set(pwmPin)
-	nrf.SAADC.CH[0].PSELP = nrf.RegValue(pwmPin)
+	nrf.SAADC.CH[0].PSELP.Set(pwmPin)
 
 	// Destination for sample result.
-	nrf.SAADC.RESULT.PTR = nrf.RegValue(uintptr(unsafe.Pointer(&value)))
+	nrf.SAADC.RESULT.PTR.Set(uint32(uintptr(unsafe.Pointer(&value))))
-	nrf.SAADC.RESULT.MAXCNT = 1 // One sample
+	nrf.SAADC.RESULT.MAXCNT.Set(1) // One sample
 
 	// Start tasks.
-	nrf.SAADC.TASKS_START = 1
+	nrf.SAADC.TASKS_START.Set(1)
-	for nrf.SAADC.EVENTS_STARTED == 0 {
+	for nrf.SAADC.EVENTS_STARTED.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_STARTED = 0x00
+	nrf.SAADC.EVENTS_STARTED.Set(0x00)
 
 	// Start the sample task.
-	nrf.SAADC.TASKS_SAMPLE = 1
+	nrf.SAADC.TASKS_SAMPLE.Set(1)
 
 	// Wait until the sample task is done.
-	for nrf.SAADC.EVENTS_END == 0 {
+	for nrf.SAADC.EVENTS_END.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_END = 0x00
+	nrf.SAADC.EVENTS_END.Set(0x00)
 
 	// Stop the ADC
-	nrf.SAADC.TASKS_STOP = 1
+	nrf.SAADC.TASKS_STOP.Set(1)
-	for nrf.SAADC.EVENTS_STOPPED == 0 {
+	for nrf.SAADC.EVENTS_STOPPED.Get() == 0 {
 	}
-	nrf.SAADC.EVENTS_STOPPED = 0
+	nrf.SAADC.EVENTS_STOPPED.Set(0)
 
 	// Disable the ADC.
-	nrf.SAADC.ENABLE = (nrf.SAADC_ENABLE_ENABLE_Disabled << nrf.SAADC_ENABLE_ENABLE_Pos)
+	nrf.SAADC.ENABLE.Set(nrf.SAADC_ENABLE_ENABLE_Disabled << nrf.SAADC_ENABLE_ENABLE_Pos)
 
 	if value < 0 {
 		value = 0
@@ -174,21 +174,21 @@ func (pwm PWM) Set(value uint16) {
 
 			p := pwms[i]
 
-			p.PSEL.OUT[0] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[0].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[1] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[1].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[2] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[2].Set(uint32(pwm.Pin))
-			p.PSEL.OUT[3] = nrf.RegValue(pwm.Pin)
+			p.PSEL.OUT[3].Set(uint32(pwm.Pin))
-			p.ENABLE = (nrf.PWM_ENABLE_ENABLE_Enabled << nrf.PWM_ENABLE_ENABLE_Pos)
+			p.ENABLE.Set(nrf.PWM_ENABLE_ENABLE_Enabled << nrf.PWM_ENABLE_ENABLE_Pos)
-			p.PRESCALER = nrf.PWM_PRESCALER_PRESCALER_DIV_2
+			p.PRESCALER.Set(nrf.PWM_PRESCALER_PRESCALER_DIV_2)
-			p.MODE = nrf.PWM_MODE_UPDOWN_Up
+			p.MODE.Set(nrf.PWM_MODE_UPDOWN_Up)
-			p.COUNTERTOP = 16384 // frequency
+			p.COUNTERTOP.Set(16384) // frequency
-			p.LOOP = 0
+			p.LOOP.Set(0)
-			p.DECODER = (nrf.PWM_DECODER_LOAD_Common << nrf.PWM_DECODER_LOAD_Pos) | (nrf.PWM_DECODER_MODE_RefreshCount << nrf.PWM_DECODER_MODE_Pos)
+			p.DECODER.Set((nrf.PWM_DECODER_LOAD_Common << nrf.PWM_DECODER_LOAD_Pos) | (nrf.PWM_DECODER_MODE_RefreshCount << nrf.PWM_DECODER_MODE_Pos))
-			p.SEQ[0].PTR = nrf.RegValue(uintptr(unsafe.Pointer(&pwmChannelSequence[i])))
+			p.SEQ[0].PTR.Set(uint32(uintptr(unsafe.Pointer(&pwmChannelSequence[i]))))
-			p.SEQ[0].CNT = 1
+			p.SEQ[0].CNT.Set(1)
-			p.SEQ[0].REFRESH = 1
+			p.SEQ[0].REFRESH.Set(1)
-			p.SEQ[0].ENDDELAY = 0
+			p.SEQ[0].ENDDELAY.Set(0)
-			p.TASKS_SEQSTART[0] = 1
+			p.TASKS_SEQSTART[0].Set(1)
 
 			break
 		}

src/machine/machine_stm32.go

@@ -4,10 +4,10 @@ package machine
 
 // Peripheral abstraction layer for the stm32.
 
-type GPIOMode uint8
+type PinMode uint8
 
 const (
-	portA = iota * 16
+	portA Pin = iota * 16
 	portB
 	portC
 	portD

src/machine/machine_stm32f103xx.go

@@ -13,25 +13,25 @@ import (
 const CPU_FREQUENCY = 72000000
 
 const (
-	GPIO_INPUT        = 0 // Input mode
+	PinInput       PinMode = 0 // Input mode
-	GPIO_OUTPUT_10MHz = 1 // Output mode, max speed 10MHz
+	PinOutput10MHz PinMode = 1 // Output mode, max speed 10MHz
-	GPIO_OUTPUT_2MHz  = 2 // Output mode, max speed 2MHz
+	PinOutput2MHz  PinMode = 2 // Output mode, max speed 2MHz
-	GPIO_OUTPUT_50MHz = 3 // Output mode, max speed 50MHz
+	PinOutput50MHz PinMode = 3 // Output mode, max speed 50MHz
-	GPIO_OUTPUT       = GPIO_OUTPUT_2MHz
+	PinOutput      PinMode = PinOutput2MHz
 
-	GPIO_INPUT_MODE_ANALOG       = 0  // Input analog mode
+	PinInputModeAnalog     PinMode = 0  // Input analog mode
-	GPIO_INPUT_MODE_FLOATING     = 4  // Input floating mode
+	PinInputModeFloating   PinMode = 4  // Input floating mode
-	GPIO_INPUT_MODE_PULL_UP_DOWN = 8  // Input pull up/down mode
+	PinInputModePullUpDown PinMode = 8  // Input pull up/down mode
-	GPIO_INPUT_MODE_RESERVED     = 12 // Input mode (reserved)
+	PinInputModeReserved   PinMode = 12 // Input mode (reserved)
 
-	GPIO_OUTPUT_MODE_GP_PUSH_PULL   = 0  // Output mode general purpose push/pull
+	PinOutputModeGPPushPull   PinMode = 0  // Output mode general purpose push/pull
-	GPIO_OUTPUT_MODE_GP_OPEN_DRAIN  = 4  // Output mode general purpose open drain
+	PinOutputModeGPOpenDrain  PinMode = 4  // Output mode general purpose open drain
-	GPIO_OUTPUT_MODE_ALT_PUSH_PULL  = 8  // Output mode alt. purpose push/pull
+	PinOutputModeAltPushPull  PinMode = 8  // Output mode alt. purpose push/pull
-	GPIO_OUTPUT_MODE_ALT_OPEN_DRAIN = 12 // Output mode alt. purpose open drain
+	PinOutputModeAltOpenDrain PinMode = 12 // Output mode alt. purpose open drain
 )
 
-func (p GPIO) getPort() *stm32.GPIO_Type {
+func (p Pin) getPort() *stm32.GPIO_Type {
-	switch p.Pin / 16 {
+	switch p / 16 {
 	case 0:
 		return stm32.GPIOA
 	case 1:
@@ -52,50 +52,50 @@ func (p GPIO) getPort() *stm32.GPIO_Type {
 }
 
 // enableClock enables the clock for this desired GPIO port.
-func (p GPIO) enableClock() {
+func (p Pin) enableClock() {
-	switch p.Pin / 16 {
+	switch p / 16 {
 	case 0:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPAEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPAEN)
 	case 1:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPBEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPBEN)
 	case 2:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPCEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPCEN)
 	case 3:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPDEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPDEN)
 	case 4:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPEEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPEEN)
 	case 5:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPFEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPFEN)
 	case 6:
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_IOPGEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_IOPGEN)
 	default:
 		panic("machine: unknown port")
 	}
 }
 
 // Configure this pin with the given configuration.
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
 	// Configure the GPIO pin.
 	p.enableClock()
 	port := p.getPort()
-	pin := p.Pin % 16
+	pin := uint8(p) % 16
-	pos := p.Pin % 8 * 4
+	pos := uint8(p) % 8 * 4
 	if pin < 8 {
-		port.CRL = stm32.RegValue((uint32(port.CRL) &^ (0xf << pos)) | (uint32(config.Mode) << pos))
+		port.CRL.Set((uint32(port.CRL.Get()) &^ (0xf << pos)) | (uint32(config.Mode) << pos))
 	} else {
-		port.CRH = stm32.RegValue((uint32(port.CRH) &^ (0xf << pos)) | (uint32(config.Mode) << pos))
+		port.CRH.Set((uint32(port.CRH.Get()) &^ (0xf << pos)) | (uint32(config.Mode) << pos))
 	}
 }
 
 // Set the pin to high or low.
 // Warning: only use this on an output pin!
-func (p GPIO) Set(high bool) {
+func (p Pin) Set(high bool) {
 	port := p.getPort()
-	pin := p.Pin % 16
+	pin := uint8(p) % 16
 	if high {
-		port.BSRR = 1 << pin
+		port.BSRR.Set(1 << pin)
 	} else {
-		port.BSRR = 1 << (pin + 16)
+		port.BSRR.Set(1 << (pin + 16))
 	}
 }
 
@@ -122,24 +122,24 @@ func (uart UART) Configure(config UARTConfig) {
 	switch config.TX {
 	case PB6:
 		// use alternate TX/RX pins PB6/PB7 via AFIO mapping
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_AFIOEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_AFIOEN)
-		stm32.AFIO.MAPR |= stm32.AFIO_MAPR_USART1_REMAP
+		stm32.AFIO.MAPR.SetBits(stm32.AFIO_MAPR_USART1_REMAP)
-		GPIO{PB6}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_PUSH_PULL})
+		PB6.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltPushPull})
-		GPIO{PB7}.Configure(GPIOConfig{Mode: GPIO_INPUT_MODE_FLOATING})
+		PB7.Configure(PinConfig{Mode: PinInputModeFloating})
 	default:
 		// use standard TX/RX pins PA9 and PA10
-		GPIO{UART_TX_PIN}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_PUSH_PULL})
+		UART_TX_PIN.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltPushPull})
-		GPIO{UART_RX_PIN}.Configure(GPIOConfig{Mode: GPIO_INPUT_MODE_FLOATING})
+		UART_RX_PIN.Configure(PinConfig{Mode: PinInputModeFloating})
 	}
 
 	// Enable USART1 clock
-	stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_USART1EN
+	stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_USART1EN)
 
 	// Set baud rate
 	uart.SetBaudRate(config.BaudRate)
 
 	// Enable USART1 port.
-	stm32.USART1.CR1 = stm32.USART_CR1_TE | stm32.USART_CR1_RE | stm32.USART_CR1_RXNEIE | stm32.USART_CR1_UE
+	stm32.USART1.CR1.Set(stm32.USART_CR1_TE | stm32.USART_CR1_RE | stm32.USART_CR1_RXNEIE | stm32.USART_CR1_UE)
 
 	// Enable RX IRQ.
 	arm.SetPriority(stm32.IRQ_USART1, 0xc0)
@@ -150,21 +150,21 @@ func (uart UART) Configure(config UARTConfig) {
 func (uart UART) SetBaudRate(br uint32) {
 	// first divide by PCLK2 prescaler (div 1) and then desired baudrate
 	divider := CPU_FREQUENCY / br
-	stm32.USART1.BRR = stm32.RegValue(divider)
+	stm32.USART1.BRR.Set(divider)
 }
 
 // WriteByte writes a byte of data to the UART.
 func (uart UART) WriteByte(c byte) error {
-	stm32.USART1.DR = stm32.RegValue(c)
+	stm32.USART1.DR.Set(uint32(c))
 
-	for (stm32.USART1.SR & stm32.USART_SR_TXE) == 0 {
+	for !stm32.USART1.SR.HasBits(stm32.USART_SR_TXE) {
 	}
 	return nil
 }
 
 //go:export USART1_IRQHandler
 func handleUART1() {
-	UART1.Receive(byte((stm32.USART1.DR & 0xFF)))
+	UART1.Receive(byte((stm32.USART1.DR.Get() & 0xFF)))
 }
 
 // SPI on the STM32.
@@ -183,9 +183,9 @@ var (
 // SPIConfig is used to store config info for SPI.
 type SPIConfig struct {
 	Frequency uint32
-	SCK       uint8
+	SCK       Pin
-	MOSI      uint8
+	MOSI      Pin
-	MISO      uint8
+	MISO      Pin
 	LSBFirst  bool
 	Mode      uint8
 }
@@ -198,9 +198,9 @@ type SPIConfig struct {
 // - hardware SS pin?
 func (spi SPI) Configure(config SPIConfig) {
 	// enable clock for SPI
-	stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_SPI1EN
+	stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_SPI1EN)
 
-	var conf uint16
+	var conf uint32
 
 	// set frequency
 	switch config.Frequency {
@@ -250,37 +250,37 @@ func (spi SPI) Configure(config SPIConfig) {
 	conf |= stm32.SPI_Mode_Master
 
 	// now set the configuration
-	spi.Bus.CR1 = stm32.RegValue(conf)
+	spi.Bus.CR1.Set(conf)
 
 	// init pins
 	spi.setPins(config.SCK, config.MOSI, config.MISO)
 
 	// enable SPI interface
-	spi.Bus.CR1 |= stm32.SPI_CR1_SPE
+	spi.Bus.CR1.SetBits(stm32.SPI_CR1_SPE)
 }
 
 // Transfer writes/reads a single byte using the SPI interface.
 func (spi SPI) Transfer(w byte) (byte, error) {
 	// Write data to be transmitted to the SPI data register
-	spi.Bus.DR = stm32.RegValue(w)
+	spi.Bus.DR.Set(uint32(w))
 
 	// Wait until transmit complete
-	for (spi.Bus.SR & stm32.SPI_SR_TXE) == 0 {
+	for !spi.Bus.SR.HasBits(stm32.SPI_SR_TXE) {
 	}
 
 	// Wait until receive complete
-	for (spi.Bus.SR & stm32.SPI_SR_RXNE) == 0 {
+	for !spi.Bus.SR.HasBits(stm32.SPI_SR_RXNE) {
 	}
 
 	// Wait until SPI is not busy
-	for (spi.Bus.SR & stm32.SPI_SR_BSY) > 0 {
+	for spi.Bus.SR.HasBits(stm32.SPI_SR_BSY) {
 	}
 
 	// Return received data from SPI data register
-	return byte(spi.Bus.DR), nil
+	return byte(spi.Bus.DR.Get()), nil
 }
 
-func (spi SPI) setPins(sck, mosi, miso uint8) {
+func (spi SPI) setPins(sck, mosi, miso Pin) {
 	if sck == 0 {
 		sck = SPI0_SCK_PIN
 	}
@@ -291,9 +291,9 @@ func (spi SPI) setPins(sck, mosi, miso uint8) {
 		miso = SPI0_MISO_PIN
 	}
 
-	GPIO{sck}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_PUSH_PULL})
+	sck.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltPushPull})
-	GPIO{mosi}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_PUSH_PULL})
+	mosi.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltPushPull})
-	GPIO{miso}.Configure(GPIOConfig{Mode: GPIO_INPUT_MODE_FLOATING})
+	miso.Configure(PinConfig{Mode: PinInputModeFloating})
 }
 
 // I2C on the STM32F103xx.
@@ -312,8 +312,8 @@ var (
 // I2CConfig is used to store config info for I2C.
 type I2CConfig struct {
 	Frequency uint32
-	SCL       uint8
+	SCL       Pin
-	SDA       uint8
+	SDA       Pin
 }
 
 // Configure is intended to setup the I2C interface.
@@ -324,26 +324,26 @@ func (i2c I2C) Configure(config I2CConfig) {
 	}
 
 	// enable clock for I2C
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_I2C1EN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_I2C1EN)
 
 	// I2C1 pins
 	switch config.SDA {
 	case PB9:
 		config.SCL = PB8
 		// use alternate I2C1 pins PB8/PB9 via AFIO mapping
-		stm32.RCC.APB2ENR |= stm32.RCC_APB2ENR_AFIOEN
+		stm32.RCC.APB2ENR.SetBits(stm32.RCC_APB2ENR_AFIOEN)
-		stm32.AFIO.MAPR |= stm32.AFIO_MAPR_I2C1_REMAP
+		stm32.AFIO.MAPR.SetBits(stm32.AFIO_MAPR_I2C1_REMAP)
 	default:
 		// use default I2C1 pins PB6/PB7
 		config.SDA = SDA_PIN
 		config.SCL = SCL_PIN
 	}
 
-	GPIO{config.SDA}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_OPEN_DRAIN})
+	config.SDA.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltOpenDrain})
-	GPIO{config.SCL}.Configure(GPIOConfig{Mode: GPIO_OUTPUT_50MHz + GPIO_OUTPUT_MODE_ALT_OPEN_DRAIN})
+	config.SCL.Configure(PinConfig{Mode: PinOutput50MHz + PinOutputModeAltOpenDrain})
 
 	// Disable the selected I2C peripheral to configure
-	i2c.Bus.CR1 &^= stm32.I2C_CR1_PE
+	i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_PE)
 
 	// pclk1 clock speed is main frequency divided by PCK1 prescaler (div 2)
 	pclk1 := uint32(CPU_FREQUENCY / 2)
@@ -351,40 +351,40 @@ func (i2c I2C) Configure(config I2CConfig) {
 	// set freqency range to pclk1 clock speed in Mhz.
 	// aka setting the value 36 means to use 36MhZ clock.
 	pclk1Mhz := pclk1 / 1000000
-	i2c.Bus.CR2 |= stm32.RegValue(pclk1Mhz)
+	i2c.Bus.CR2.SetBits(pclk1Mhz)
 
 	switch config.Frequency {
 	case TWI_FREQ_100KHZ:
 		// Normal mode speed calculation
 		ccr := pclk1 / (config.Frequency * 2)
-		i2c.Bus.CCR = stm32.RegValue(ccr)
+		i2c.Bus.CCR.Set(ccr)
 
 		// duty cycle 2
-		i2c.Bus.CCR &^= stm32.I2C_CCR_DUTY
+		i2c.Bus.CCR.ClearBits(stm32.I2C_CCR_DUTY)
 
 		// frequency standard mode
-		i2c.Bus.CCR &^= stm32.I2C_CCR_F_S
+		i2c.Bus.CCR.ClearBits(stm32.I2C_CCR_F_S)
 
 		// Set Maximum Rise Time for standard mode
-		i2c.Bus.TRISE = stm32.RegValue(pclk1Mhz)
+		i2c.Bus.TRISE.Set(pclk1Mhz)
 
 	case TWI_FREQ_400KHZ:
 		// Fast mode speed calculation
 		ccr := pclk1 / (config.Frequency * 3)
-		i2c.Bus.CCR = stm32.RegValue(ccr)
+		i2c.Bus.CCR.Set(ccr)
 
 		// duty cycle 2
-		i2c.Bus.CCR &^= stm32.I2C_CCR_DUTY
+		i2c.Bus.CCR.ClearBits(stm32.I2C_CCR_DUTY)
 
 		// frequency fast mode
-		i2c.Bus.CCR |= stm32.I2C_CCR_F_S
+		i2c.Bus.CCR.SetBits(stm32.I2C_CCR_F_S)
 
 		// Set Maximum Rise Time for fast mode
-		i2c.Bus.TRISE = stm32.RegValue(((pclk1Mhz * 300) / 1000))
+		i2c.Bus.TRISE.Set(((pclk1Mhz * 300) / 1000))
 	}
 
 	// re-enable the selected I2C peripheral
-	i2c.Bus.CR1 |= stm32.I2C_CR1_PE
+	i2c.Bus.CR1.SetBits(stm32.I2C_CR1_PE)
 }
 
 // Tx does a single I2C transaction at the specified address.
@@ -435,11 +435,11 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Disable ACK of received data
-			i2c.Bus.CR1 &^= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_ACK)
 
 			// clear timeout here
 			timeout := i2cTimeout
-			for i2c.Bus.SR2&(stm32.I2C_SR2_MSL|stm32.I2C_SR2_BUSY) == 0 {
+			for !i2c.Bus.SR2.HasBits(stm32.I2C_SR2_MSL | stm32.I2C_SR2_BUSY) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read clear address")
@@ -447,10 +447,10 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Generate stop condition
-			i2c.Bus.CR1 |= stm32.I2C_CR1_STOP
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_STOP)
 
 			timeout = i2cTimeout
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_RxNE) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_RxNE) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read 1 byte")
@@ -458,17 +458,17 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Read and return data byte from I2C data register
-			r[0] = byte(i2c.Bus.DR)
+			r[0] = byte(i2c.Bus.DR.Get())
 
 			// wait for stop
 			return i2c.waitForStop()
 
 		case 2:
 			// enable pos
-			i2c.Bus.CR1 |= stm32.I2C_CR1_POS
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_POS)
 
 			// Enable ACK of received data
-			i2c.Bus.CR1 |= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_ACK)
 
 			// send address
 			err = i2c.sendAddress(uint8(addr), false)
@@ -478,7 +478,7 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 
 			// clear address here
 			timeout := i2cTimeout
-			for i2c.Bus.SR2&(stm32.I2C_SR2_MSL|stm32.I2C_SR2_BUSY) == 0 {
+			for !i2c.Bus.SR2.HasBits(stm32.I2C_SR2_MSL | stm32.I2C_SR2_BUSY) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read clear address")
@@ -486,11 +486,11 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Disable ACK of received data
-			i2c.Bus.CR1 &^= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_ACK)
 
 			// wait for btf. we need a longer timeout here than normal.
 			timeout = 1000
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_BTF) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_BTF) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read 2 bytes")
@@ -498,18 +498,23 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Generate stop condition
-			i2c.Bus.CR1 |= stm32.I2C_CR1_STOP
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_STOP)
 
 			// read the 2 bytes by reading twice.
-			r[0] = byte(i2c.Bus.DR)
+			r[0] = byte(i2c.Bus.DR.Get())
-			r[1] = byte(i2c.Bus.DR)
+			r[1] = byte(i2c.Bus.DR.Get())
 
 			// wait for stop
-			return i2c.waitForStop()
+			err = i2c.waitForStop()
+
+			//disable pos
+			i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_POS)
+
+			return err
 
 		case 3:
 			// Enable ACK of received data
-			i2c.Bus.CR1 |= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_ACK)
 
 			// send address
 			err = i2c.sendAddress(uint8(addr), false)
@@ -519,7 +524,7 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 
 			// clear address here
 			timeout := i2cTimeout
-			for i2c.Bus.SR2&(stm32.I2C_SR2_MSL|stm32.I2C_SR2_BUSY) == 0 {
+			for !i2c.Bus.SR2.HasBits(stm32.I2C_SR2_MSL | stm32.I2C_SR2_BUSY) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read clear address")
@@ -527,11 +532,11 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Enable ACK of received data
-			i2c.Bus.CR1 |= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_ACK)
 
 			// wait for btf. we need a longer timeout here than normal.
 			timeout = 1000
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_BTF) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_BTF) {
 				timeout--
 				if timeout == 0 {
 					println("I2C timeout on read 3 bytes")
@@ -540,13 +545,13 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Disable ACK of received data
-			i2c.Bus.CR1 &^= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_ACK)
 
 			// read the first byte
-			r[0] = byte(i2c.Bus.DR)
+			r[0] = byte(i2c.Bus.DR.Get())
 
 			timeout = 1000
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_BTF) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_BTF) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read 3 bytes")
@@ -554,11 +559,11 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Generate stop condition
-			i2c.Bus.CR1 |= stm32.I2C_CR1_STOP
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_STOP)
 
 			// read the last 2 bytes by reading twice.
-			r[1] = byte(i2c.Bus.DR)
+			r[1] = byte(i2c.Bus.DR.Get())
-			r[2] = byte(i2c.Bus.DR)
+			r[2] = byte(i2c.Bus.DR.Get())
 
 			// wait for stop
 			return i2c.waitForStop()
@@ -574,7 +579,7 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 
 			// clear address here
 			timeout := i2cTimeout
-			for i2c.Bus.SR2&(stm32.I2C_SR2_MSL|stm32.I2C_SR2_BUSY) == 0 {
+			for !i2c.Bus.SR2.HasBits(stm32.I2C_SR2_MSL | stm32.I2C_SR2_BUSY) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read clear address")
@@ -583,11 +588,11 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 
 			for i := 0; i < len(r)-3; i++ {
 				// Enable ACK of received data
-				i2c.Bus.CR1 |= stm32.I2C_CR1_ACK
+				i2c.Bus.CR1.SetBits(stm32.I2C_CR1_ACK)
 
 				// wait for btf. we need a longer timeout here than normal.
 				timeout = 1000
-				for (i2c.Bus.SR1 & stm32.I2C_SR1_BTF) == 0 {
+				for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_BTF) {
 					timeout--
 					if timeout == 0 {
 						println("I2C timeout on read 3 bytes")
@@ -596,12 +601,12 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 				}
 
 				// read the next byte
-				r[i] = byte(i2c.Bus.DR)
+				r[i] = byte(i2c.Bus.DR.Get())
 			}
 
 			// wait for btf. we need a longer timeout here than normal.
 			timeout = 1000
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_BTF) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_BTF) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read more than 3 bytes")
@@ -609,19 +614,19 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// Disable ACK of received data
-			i2c.Bus.CR1 &^= stm32.I2C_CR1_ACK
+			i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_ACK)
 
 			// get third from last byte
-			r[len(r)-3] = byte(i2c.Bus.DR)
+			r[len(r)-3] = byte(i2c.Bus.DR.Get())
 
 			// Generate stop condition
-			i2c.Bus.CR1 |= stm32.I2C_CR1_STOP
+			i2c.Bus.CR1.SetBits(stm32.I2C_CR1_STOP)
 
 			// get second from last byte
-			r[len(r)-2] = byte(i2c.Bus.DR)
+			r[len(r)-2] = byte(i2c.Bus.DR.Get())
 
 			timeout = i2cTimeout
-			for (i2c.Bus.SR1 & stm32.I2C_SR1_RxNE) == 0 {
+			for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_RxNE) {
 				timeout--
 				if timeout == 0 {
 					return errors.New("I2C timeout on read last byte of more than 3")
@@ -629,7 +634,7 @@ func (i2c I2C) Tx(addr uint16, w, r []byte) error {
 			}
 
 			// get last byte
-			r[len(r)-1] = byte(i2c.Bus.DR)
+			r[len(r)-1] = byte(i2c.Bus.DR.Get())
 
 			// wait for stop
 			return i2c.waitForStop()
@@ -645,7 +650,7 @@ const i2cTimeout = 500
 func (i2c I2C) signalStart() error {
 	// Wait until I2C is not busy
 	timeout := i2cTimeout
-	for (i2c.Bus.SR2 & stm32.I2C_SR2_BUSY) > 0 {
+	for i2c.Bus.SR2.HasBits(stm32.I2C_SR2_BUSY) {
 		timeout--
 		if timeout == 0 {
 			return errors.New("I2C busy on start")
@@ -653,14 +658,14 @@ func (i2c I2C) signalStart() error {
 	}
 
 	// clear stop
-	i2c.Bus.CR1 &^= stm32.I2C_CR1_STOP
+	i2c.Bus.CR1.ClearBits(stm32.I2C_CR1_STOP)
 
 	// Generate start condition
-	i2c.Bus.CR1 |= stm32.I2C_CR1_START
+	i2c.Bus.CR1.SetBits(stm32.I2C_CR1_START)
 
 	// Wait for I2C EV5 aka SB flag.
 	timeout = i2cTimeout
-	for (i2c.Bus.SR1 & stm32.I2C_SR1_SB) == 0 {
+	for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_SB) {
 		timeout--
 		if timeout == 0 {
 			return errors.New("I2C timeout on start")
@@ -673,7 +678,7 @@ func (i2c I2C) signalStart() error {
 // signalStop sends a stop signal and waits for it to succeed.
 func (i2c I2C) signalStop() error {
 	// Generate stop condition
-	i2c.Bus.CR1 |= stm32.I2C_CR1_STOP
+	i2c.Bus.CR1.SetBits(stm32.I2C_CR1_STOP)
 
 	// wait for stop
 	return i2c.waitForStop()
@@ -683,7 +688,7 @@ func (i2c I2C) signalStop() error {
 func (i2c I2C) waitForStop() error {
 	// Wait until I2C is stopped
 	timeout := i2cTimeout
-	for (i2c.Bus.SR1 & stm32.I2C_SR1_STOPF) > 0 {
+	for i2c.Bus.SR1.HasBits(stm32.I2C_SR1_STOPF) {
 		timeout--
 		if timeout == 0 {
 			println("I2C timeout on wait for stop signal")
@@ -701,14 +706,14 @@ func (i2c I2C) sendAddress(address uint8, write bool) error {
 		data |= 1 // set read flag
 	}
 
-	i2c.Bus.DR = stm32.RegValue(data)
+	i2c.Bus.DR.Set(uint32(data))
 
 	// Wait for I2C EV6 event.
 	// Destination device acknowledges address
 	timeout := i2cTimeout
 	if write {
 		// EV6 which is ADDR flag.
-		for i2c.Bus.SR1&stm32.I2C_SR1_ADDR == 0 {
+		for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_ADDR) {
 			timeout--
 			if timeout == 0 {
 				return errors.New("I2C timeout on send write address")
@@ -716,7 +721,7 @@ func (i2c I2C) sendAddress(address uint8, write bool) error {
 		}
 
 		timeout = i2cTimeout
-		for i2c.Bus.SR2&(stm32.I2C_SR2_MSL|stm32.I2C_SR2_BUSY|stm32.I2C_SR2_TRA) == 0 {
+		for !i2c.Bus.SR2.HasBits(stm32.I2C_SR2_MSL | stm32.I2C_SR2_BUSY | stm32.I2C_SR2_TRA) {
 			timeout--
 			if timeout == 0 {
 				return errors.New("I2C timeout on send write address")
@@ -724,7 +729,7 @@ func (i2c I2C) sendAddress(address uint8, write bool) error {
 		}
 	} else {
 		// I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED which is ADDR flag.
-		for (i2c.Bus.SR1 & stm32.I2C_SR1_ADDR) == 0 {
+		for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_ADDR) {
 			timeout--
 			if timeout == 0 {
 				return errors.New("I2C timeout on send read address")
@@ -738,13 +743,13 @@ func (i2c I2C) sendAddress(address uint8, write bool) error {
 // WriteByte writes a single byte to the I2C bus.
 func (i2c I2C) WriteByte(data byte) error {
 	// Send data byte
-	i2c.Bus.DR = stm32.RegValue(data)
+	i2c.Bus.DR.Set(uint32(data))
 
 	// Wait for I2C EV8_2 when data has been physically shifted out and
 	// output on the bus.
 	// I2C_EVENT_MASTER_BYTE_TRANSMITTED is TXE flag.
 	timeout := i2cTimeout
-	for i2c.Bus.SR1&stm32.I2C_SR1_TxE == 0 {
+	for !i2c.Bus.SR1.HasBits(stm32.I2C_SR1_TxE) {
 		timeout--
 		if timeout == 0 {
 			return errors.New("I2C timeout on write")

src/machine/machine_stm32f407.go

@@ -13,15 +13,15 @@ const CPU_FREQUENCY = 168000000
 
 const (
 	// Mode Flag
-	GPIO_OUTPUT         = 0
+	PinOutput        PinMode = 0
-	GPIO_INPUT          = GPIO_INPUT_PULLDOWN
+	PinInput         PinMode = PinInputFloating
-	GPIO_INPUT_FLOATING = 1
+	PinInputFloating PinMode = 1
-	GPIO_INPUT_PULLDOWN = 2
+	PinInputPulldown PinMode = 2
-	GPIO_INPUT_PULLUP   = 3
+	PinInputPullup   PinMode = 3
 
 	// for UART
-	GPIO_UART_TX = 4
+	PinModeUartTX PinMode = 4
-	GPIO_UART_RX = 5
+	PinModeUartRX PinMode = 5
 
 	//GPIOx_MODER
 	GPIO_MODE_INPUT          = 0
@@ -45,8 +45,8 @@ const (
 	GPIO_PULL_DOWN = 2
 )
 
-func (p GPIO) getPort() *stm32.GPIO_Type {
+func (p Pin) getPort() *stm32.GPIO_Type {
-	switch p.Pin / 16 {
+	switch p / 16 {
 	case 0:
 		return stm32.GPIOA
 	case 1:
@@ -71,83 +71,83 @@ func (p GPIO) getPort() *stm32.GPIO_Type {
 }
 
 // enableClock enables the clock for this desired GPIO port.
-func (p GPIO) enableClock() {
+func (p Pin) enableClock() {
-	switch p.Pin / 16 {
+	switch p / 16 {
 	case 0:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOAEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOAEN)
 	case 1:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOBEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOBEN)
 	case 2:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOCEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOCEN)
 	case 3:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIODEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIODEN)
 	case 4:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOEEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOEEN)
 	case 5:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOFEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOFEN)
 	case 6:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOGEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOGEN)
 	case 7:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOHEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOHEN)
 	case 8:
-		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOIEN
+		stm32.RCC.AHB1ENR.SetBits(stm32.RCC_AHB1ENR_GPIOIEN)
 	default:
 		panic("machine: unknown port")
 	}
 }
 
 // Configure this pin with the given configuration.
-func (p GPIO) Configure(config GPIOConfig) {
+func (p Pin) Configure(config PinConfig) {
 	// Configure the GPIO pin.
 	p.enableClock()
 	port := p.getPort()
-	pin := p.Pin % 16
+	pin := uint8(p) % 16
 	pos := pin * 2
 
-	if config.Mode == GPIO_INPUT_FLOATING {
+	if config.Mode == PinInputFloating {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
-		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
+		port.PUPDR.Set((uint32(port.PUPDR.Get())&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
-	} else if config.Mode == GPIO_INPUT_PULLDOWN {
+	} else if config.Mode == PinInputPulldown {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
-		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_DOWN) << pos)))
+		port.PUPDR.Set((uint32(port.PUPDR.Get())&^(0x3<<pos) | (uint32(GPIO_PULL_DOWN) << pos)))
-	} else if config.Mode == GPIO_INPUT_PULLUP {
+	} else if config.Mode == PinInputPullup {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
-		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
+		port.PUPDR.Set((uint32(port.PUPDR.Get())&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
-	} else if config.Mode == GPIO_OUTPUT {
+	} else if config.Mode == PinOutput {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_GENERAL_OUTPUT) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_GENERAL_OUTPUT) << pos)))
-		port.OSPEEDR = stm32.RegValue((uint32(port.OSPEEDR)&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
+		port.OSPEEDR.Set((uint32(port.OSPEEDR.Get())&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
-	} else if config.Mode == GPIO_UART_TX {
+	} else if config.Mode == PinModeUartTX {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
-		port.OSPEEDR = stm32.RegValue((uint32(port.OSPEEDR)&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
+		port.OSPEEDR.Set((uint32(port.OSPEEDR.Get())&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
-		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
+		port.PUPDR.Set((uint32(port.PUPDR.Get())&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
 		p.setAltFunc(0x7)
-	} else if config.Mode == GPIO_UART_RX {
+	} else if config.Mode == PinModeUartRX {
-		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
+		port.MODER.Set((uint32(port.MODER.Get())&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
-		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
+		port.PUPDR.Set((uint32(port.PUPDR.Get())&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
 		p.setAltFunc(0x7)
 	}
 }
 
-func (p GPIO) setAltFunc(af uint32) {
+func (p Pin) setAltFunc(af uint32) {
 	port := p.getPort()
-	pin := p.Pin % 16
+	pin := uint8(p) % 16
 	pos := pin * 4
 	if pin >= 8 {
-		port.AFRH = stm32.RegValue(uint32(port.AFRH)&^(0xF<<pos) | ((af & 0xF) << pos))
+		port.AFRH.Set(uint32(port.AFRH.Get())&^(0xF<<pos) | ((af & 0xF) << pos))
 	} else {
-		port.AFRL = stm32.RegValue(uint32(port.AFRL)&^(0xF<<pos) | ((af & 0xF) << pos))
+		port.AFRL.Set(uint32(port.AFRL.Get())&^(0xF<<pos) | ((af & 0xF) << pos))
 	}
 }
 
 // Set the pin to high or low.
 // Warning: only use this on an output pin!
-func (p GPIO) Set(high bool) {
+func (p Pin) Set(high bool) {
 	port := p.getPort()
-	pin := p.Pin % 16
+	pin := p % 16
 	if high {
-		port.BSRR = 1 << pin
+		port.BSRR.Set(1 << uint8(pin))
 	} else {
-		port.BSRR = 1 << (pin + 16)
+		port.BSRR.Set(1 << uint8(pin+16))
 	}
 }
 
@@ -173,12 +173,12 @@ func (uart UART) Configure(config UARTConfig) {
 	switch config.TX {
 	default:
 		// use standard TX/RX pins PA2 and PA3
-		GPIO{UART_TX_PIN}.Configure(GPIOConfig{Mode: GPIO_UART_TX})
+		UART_TX_PIN.Configure(PinConfig{Mode: PinModeUartTX})
-		GPIO{UART_RX_PIN}.Configure(GPIOConfig{Mode: GPIO_UART_RX})
+		UART_RX_PIN.Configure(PinConfig{Mode: PinModeUartRX})
 	}
 
 	// Enable USART2 clock
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_USART2EN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_USART2EN)
 
 	/*
 	  Set baud rate(115200)
@@ -195,10 +195,10 @@ func (uart UART) Configure(config UARTConfig) {
 	  | 115200   | 0x16D  |
 	  +----------+--------+
 	*/
-	stm32.USART2.BRR = 0x16c
+	stm32.USART2.BRR.Set(0x16c)
 
 	// Enable USART2 port.
-	stm32.USART2.CR1 = stm32.USART_CR1_TE | stm32.USART_CR1_RE | stm32.USART_CR1_RXNEIE | stm32.USART_CR1_UE
+	stm32.USART2.CR1.Set(stm32.USART_CR1_TE | stm32.USART_CR1_RE | stm32.USART_CR1_RXNEIE | stm32.USART_CR1_UE)
 
 	// Enable RX IRQ.
 	arm.SetPriority(stm32.IRQ_USART2, 0xc0)
@@ -207,14 +207,14 @@ func (uart UART) Configure(config UARTConfig) {
 
 // WriteByte writes a byte of data to the UART.
 func (uart UART) WriteByte(c byte) error {
-	stm32.USART2.DR = stm32.RegValue(c)
+	stm32.USART2.DR.Set(uint32(c))
 
-	for (stm32.USART2.SR & stm32.USART_SR_TXE) == 0 {
+	for !stm32.USART2.SR.HasBits(stm32.USART_SR_TXE) {
 	}
 	return nil
 }
 
 //go:export USART2_IRQHandler
 func handleUSART2() {
-	UART1.Receive(byte((stm32.USART2.DR & 0xFF)))
+	UART1.Receive(byte((stm32.USART2.DR.Get() & 0xFF)))
 }

src/machine/uart.go

@@ -6,8 +6,8 @@ import "errors"
 
 type UARTConfig struct {
 	BaudRate uint32
-	TX       uint8
+	TX       Pin
-	RX       uint8
+	RX       Pin
 }
 
 // To implement the UART interface for a board, you must declare a concrete type as follows:

src/machine/usb.go

@@ -484,11 +484,11 @@ const (
 // 		 RoReg8                    Reserved1[0x5];
 //   } UsbDeviceDescBank;
 type usbDeviceDescBank struct {
-	ADDR      sam.RegValue
+	ADDR      sam.Register32
-	PCKSIZE   sam.RegValue
+	PCKSIZE   sam.Register32
-	EXTREG    sam.RegValue16
+	EXTREG    sam.Register16
-	STATUS_BK sam.RegValue8
+	STATUS_BK sam.Register8
-	_reserved [5]sam.RegValue8
+	_reserved [5]sam.Register8
 }
 
 type usbDeviceDescriptor struct {

src/runtime/panic.go

@@ -36,16 +36,20 @@ func isnil(ptr *uint8) bool {
 }
 
 // Panic when trying to dereference a nil pointer.
-func nilpanic() {
+func nilPanic() {
 	runtimePanic("nil pointer dereference")
 }
 
 // Panic when trying to acces an array or slice out of bounds.
-func lookuppanic() {
+func lookupPanic() {
 	runtimePanic("index out of range")
 }
 
 // Panic when trying to slice a slice out of bounds.
-func slicepanic() {
+func slicePanic() {
 	runtimePanic("slice out of range")
 }
+
+func blockingPanic() {
+	runtimePanic("trying to do blocking operation in exported function")
+}

src/runtime/runtime.go

@@ -10,7 +10,7 @@ const Compiler = "tinygo"
 // package.
 func initAll()
 
-// A function call to this function is replaced withone of the following,
+// A function call to this function is replaced with one of the following,
 // depending on whether the scheduler is necessary:
 //
 // Without scheduler:

src/runtime/runtime_atsamd21.go

@@ -36,12 +36,12 @@ func putchar(c byte) {
 
 func initClocks() {
 	// Set 1 Flash Wait State for 48MHz, required for 3.3V operation according to SAMD21 Datasheet
-	sam.NVMCTRL.CTRLB |= (sam.NVMCTRL_CTRLB_RWS_HALF << sam.NVMCTRL_CTRLB_RWS_Pos)
+	sam.NVMCTRL.CTRLB.SetBits(sam.NVMCTRL_CTRLB_RWS_HALF << sam.NVMCTRL_CTRLB_RWS_Pos)
 
 	// Turn on the digital interface clock
-	sam.PM.APBAMASK |= sam.PM_APBAMASK_GCLK_
+	sam.PM.APBAMASK.SetBits(sam.PM_APBAMASK_GCLK_)
 	// turn off RTC
-	sam.PM.APBAMASK &^= sam.PM_APBAMASK_RTC_
+	sam.PM.APBAMASK.ClearBits(sam.PM_APBAMASK_RTC_)
 
 	// Enable OSC32K clock (Internal 32.768Hz oscillator).
 	// This requires registers that are not included in the SVD file.
@@ -61,42 +61,42 @@ func initClocks() {
 	// SYSCTRL_OSC32K_CALIB(calib) |
 	//  SYSCTRL_OSC32K_STARTUP(0x6u) |
 	//  SYSCTRL_OSC32K_EN32K | SYSCTRL_OSC32K_ENABLE;
-	sam.SYSCTRL.OSC32K = sam.RegValue((calib << sam.SYSCTRL_OSC32K_CALIB_Pos) |
+	sam.SYSCTRL.OSC32K.Set((calib << sam.SYSCTRL_OSC32K_CALIB_Pos) |
 		(0x6 << sam.SYSCTRL_OSC32K_STARTUP_Pos) |
 		sam.SYSCTRL_OSC32K_EN32K |
 		sam.SYSCTRL_OSC32K_EN1K |
 		sam.SYSCTRL_OSC32K_ENABLE)
 	// Wait for oscillator stabilization
-	for (sam.SYSCTRL.PCLKSR & sam.SYSCTRL_PCLKSR_OSC32KRDY) == 0 {
+	for !sam.SYSCTRL.PCLKSR.HasBits(sam.SYSCTRL_PCLKSR_OSC32KRDY) {
 	}
 
 	// Software reset the module to ensure it is re-initialized correctly
-	sam.GCLK.CTRL = sam.GCLK_CTRL_SWRST
+	sam.GCLK.CTRL.Set(sam.GCLK_CTRL_SWRST)
 	// Wait for reset to complete
-	for (sam.GCLK.CTRL&sam.GCLK_CTRL_SWRST) > 0 && (sam.GCLK.STATUS&sam.GCLK_STATUS_SYNCBUSY) > 0 {
+	for sam.GCLK.CTRL.HasBits(sam.GCLK_CTRL_SWRST) && sam.GCLK.STATUS.HasBits(sam.GCLK_STATUS_SYNCBUSY) {
 	}
 
 	// Put OSC32K as source of Generic Clock Generator 1
-	sam.GCLK.GENDIV = sam.RegValue((1 << sam.GCLK_GENDIV_ID_Pos) |
+	sam.GCLK.GENDIV.Set((1 << sam.GCLK_GENDIV_ID_Pos) |
 		(0 << sam.GCLK_GENDIV_DIV_Pos))
 	waitForSync()
 
 	// GCLK_GENCTRL_ID(1) | GCLK_GENCTRL_SRC_OSC32K | GCLK_GENCTRL_GENEN;
-	sam.GCLK.GENCTRL = sam.RegValue((1 << sam.GCLK_GENCTRL_ID_Pos) |
+	sam.GCLK.GENCTRL.Set((1 << sam.GCLK_GENCTRL_ID_Pos) |
 		(sam.GCLK_GENCTRL_SRC_OSC32K << sam.GCLK_GENCTRL_SRC_Pos) |
 		sam.GCLK_GENCTRL_GENEN)
 	waitForSync()
 
 	// Use Generic Clock Generator 1 as source for Generic Clock Multiplexer 0 (DFLL48M reference)
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_DFLL48 << sam.GCLK_CLKCTRL_ID_Pos) |
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_DFLL48 << sam.GCLK_CLKCTRL_ID_Pos) |
 		(sam.GCLK_CLKCTRL_GEN_GCLK1 << sam.GCLK_CLKCTRL_GEN_Pos) |
 		sam.GCLK_CLKCTRL_CLKEN)
 	waitForSync()
 
 	// Remove the OnDemand mode, Bug http://avr32.icgroup.norway.atmel.com/bugzilla/show_bug.cgi?id=9905
-	sam.SYSCTRL.DFLLCTRL = sam.SYSCTRL_DFLLCTRL_ENABLE
+	sam.SYSCTRL.DFLLCTRL.Set(sam.SYSCTRL_DFLLCTRL_ENABLE)
 	// Wait for ready
-	for (sam.SYSCTRL.PCLKSR & sam.SYSCTRL_PCLKSR_DFLLRDY) == 0 {
+	for !sam.SYSCTRL.PCLKSR.HasBits(sam.SYSCTRL_PCLKSR_DFLLRDY) {
 	}
 
 	// Handle DFLL calibration based on info learned from Arduino SAMD implementation,
@@ -110,107 +110,107 @@ func initClocks() {
 		coarse = 0x1f
 	}
 
-	sam.SYSCTRL.DFLLVAL |= sam.RegValue(coarse << sam.SYSCTRL_DFLLVAL_COARSE_Pos)
+	sam.SYSCTRL.DFLLVAL.SetBits(coarse << sam.SYSCTRL_DFLLVAL_COARSE_Pos)
-	sam.SYSCTRL.DFLLVAL |= (0x1ff << sam.SYSCTRL_DFLLVAL_FINE_Pos)
+	sam.SYSCTRL.DFLLVAL.SetBits(0x1ff << sam.SYSCTRL_DFLLVAL_FINE_Pos)
 
 	// Write full configuration to DFLL control register
 	// SYSCTRL_DFLLMUL_CSTEP( 0x1f / 4 ) | // Coarse step is 31, half of the max value
 	// SYSCTRL_DFLLMUL_FSTEP( 10 ) |
 	// SYSCTRL_DFLLMUL_MUL( (48000) ) ;
-	sam.SYSCTRL.DFLLMUL = sam.RegValue(((31 / 4) << sam.SYSCTRL_DFLLMUL_CSTEP_Pos) |
+	sam.SYSCTRL.DFLLMUL.Set(((31 / 4) << sam.SYSCTRL_DFLLMUL_CSTEP_Pos) |
 		(10 << sam.SYSCTRL_DFLLMUL_FSTEP_Pos) |
 		(48000 << sam.SYSCTRL_DFLLMUL_MUL_Pos))
 
 	// disable DFLL
-	sam.SYSCTRL.DFLLCTRL = 0
+	sam.SYSCTRL.DFLLCTRL.Set(0)
 	waitForSync()
 
-	sam.SYSCTRL.DFLLCTRL |= sam.SYSCTRL_DFLLCTRL_MODE |
+	sam.SYSCTRL.DFLLCTRL.SetBits(sam.SYSCTRL_DFLLCTRL_MODE |
 		sam.SYSCTRL_DFLLCTRL_CCDIS |
 		sam.SYSCTRL_DFLLCTRL_USBCRM |
-		sam.SYSCTRL_DFLLCTRL_BPLCKC
+		sam.SYSCTRL_DFLLCTRL_BPLCKC)
 	// Wait for ready
-	for (sam.SYSCTRL.PCLKSR & sam.SYSCTRL_PCLKSR_DFLLRDY) == 0 {
+	for !sam.SYSCTRL.PCLKSR.HasBits(sam.SYSCTRL_PCLKSR_DFLLRDY) {
 	}
 
 	// Re-enable the DFLL
-	sam.SYSCTRL.DFLLCTRL |= sam.SYSCTRL_DFLLCTRL_ENABLE
+	sam.SYSCTRL.DFLLCTRL.SetBits(sam.SYSCTRL_DFLLCTRL_ENABLE)
 	// Wait for ready
-	for (sam.SYSCTRL.PCLKSR & sam.SYSCTRL_PCLKSR_DFLLRDY) == 0 {
+	for !sam.SYSCTRL.PCLKSR.HasBits(sam.SYSCTRL_PCLKSR_DFLLRDY) {
 	}
 
 	// Switch Generic Clock Generator 0 to DFLL48M. CPU will run at 48MHz.
-	sam.GCLK.GENDIV = sam.RegValue((0 << sam.GCLK_GENDIV_ID_Pos) |
+	sam.GCLK.GENDIV.Set((0 << sam.GCLK_GENDIV_ID_Pos) |
 		(0 << sam.GCLK_GENDIV_DIV_Pos))
 	waitForSync()
 
-	sam.GCLK.GENCTRL = sam.RegValue((0 << sam.GCLK_GENCTRL_ID_Pos) |
+	sam.GCLK.GENCTRL.Set((0 << sam.GCLK_GENCTRL_ID_Pos) |
 		(sam.GCLK_GENCTRL_SRC_DFLL48M << sam.GCLK_GENCTRL_SRC_Pos) |
 		sam.GCLK_GENCTRL_IDC |
 		sam.GCLK_GENCTRL_GENEN)
 	waitForSync()
 
 	// Modify PRESCaler value of OSC8M to have 8MHz
-	sam.SYSCTRL.OSC8M |= (sam.SYSCTRL_OSC8M_PRESC_0 << sam.SYSCTRL_OSC8M_PRESC_Pos)
+	sam.SYSCTRL.OSC8M.SetBits(sam.SYSCTRL_OSC8M_PRESC_0 << sam.SYSCTRL_OSC8M_PRESC_Pos)
-	sam.SYSCTRL.OSC8M &^= (1 << sam.SYSCTRL_OSC8M_ONDEMAND_Pos)
+	sam.SYSCTRL.OSC8M.ClearBits(1 << sam.SYSCTRL_OSC8M_ONDEMAND_Pos)
 	// Wait for oscillator stabilization
-	for (sam.SYSCTRL.PCLKSR & sam.SYSCTRL_PCLKSR_OSC8MRDY) == 0 {
+	for !sam.SYSCTRL.PCLKSR.HasBits(sam.SYSCTRL_PCLKSR_OSC8MRDY) {
 	}
 
 	// Use OSC8M as source for Generic Clock Generator 3
-	sam.GCLK.GENDIV = sam.RegValue((3 << sam.GCLK_GENDIV_ID_Pos))
+	sam.GCLK.GENDIV.Set((3 << sam.GCLK_GENDIV_ID_Pos))
 	waitForSync()
 
-	sam.GCLK.GENCTRL = sam.RegValue((3 << sam.GCLK_GENCTRL_ID_Pos) |
+	sam.GCLK.GENCTRL.Set((3 << sam.GCLK_GENCTRL_ID_Pos) |
 		(sam.GCLK_GENCTRL_SRC_OSC8M << sam.GCLK_GENCTRL_SRC_Pos) |
 		sam.GCLK_GENCTRL_GENEN)
 	waitForSync()
 
 	// Use OSC32K as source for Generic Clock Generator 2
 	// OSC32K/1 -> GCLK2 at 32KHz
-	sam.GCLK.GENDIV = sam.RegValue(2 << sam.GCLK_GENDIV_ID_Pos)
+	sam.GCLK.GENDIV.Set(2 << sam.GCLK_GENDIV_ID_Pos)
 	waitForSync()
 
-	sam.GCLK.GENCTRL = sam.RegValue((2 << sam.GCLK_GENCTRL_ID_Pos) |
+	sam.GCLK.GENCTRL.Set((2 << sam.GCLK_GENCTRL_ID_Pos) |
 		(sam.GCLK_GENCTRL_SRC_OSC32K << sam.GCLK_GENCTRL_SRC_Pos) |
 		sam.GCLK_GENCTRL_GENEN)
 	waitForSync()
 
 	// Use GCLK2 for RTC
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_RTC << sam.GCLK_CLKCTRL_ID_Pos) |
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_RTC << sam.GCLK_CLKCTRL_ID_Pos) |
 		(sam.GCLK_CLKCTRL_GEN_GCLK2 << sam.GCLK_CLKCTRL_GEN_Pos) |
 		sam.GCLK_CLKCTRL_CLKEN)
 	waitForSync()
 
 	// Set the CPU, APBA, B, and C dividers
-	sam.PM.CPUSEL = sam.PM_CPUSEL_CPUDIV_DIV1
+	sam.PM.CPUSEL.Set(sam.PM_CPUSEL_CPUDIV_DIV1)
-	sam.PM.APBASEL = sam.PM_APBASEL_APBADIV_DIV1
+	sam.PM.APBASEL.Set(sam.PM_APBASEL_APBADIV_DIV1)
-	sam.PM.APBBSEL = sam.PM_APBBSEL_APBBDIV_DIV1
+	sam.PM.APBBSEL.Set(sam.PM_APBBSEL_APBBDIV_DIV1)
-	sam.PM.APBCSEL = sam.PM_APBCSEL_APBCDIV_DIV1
+	sam.PM.APBCSEL.Set(sam.PM_APBCSEL_APBCDIV_DIV1)
 
 	// Disable automatic NVM write operations
-	sam.NVMCTRL.CTRLB |= sam.NVMCTRL_CTRLB_MANW
+	sam.NVMCTRL.CTRLB.SetBits(sam.NVMCTRL_CTRLB_MANW)
 }
 
 func initRTC() {
 	// turn on digital interface clock
-	sam.PM.APBAMASK |= sam.PM_APBAMASK_RTC_
+	sam.PM.APBAMASK.SetBits(sam.PM_APBAMASK_RTC_)
 
 	// disable RTC
-	sam.RTC_MODE0.CTRL = 0
+	sam.RTC_MODE0.CTRL.Set(0)
 	waitForSync()
 
 	// reset RTC
-	sam.RTC_MODE0.CTRL |= sam.RTC_MODE0_CTRL_SWRST
+	sam.RTC_MODE0.CTRL.SetBits(sam.RTC_MODE0_CTRL_SWRST)
 	waitForSync()
 
 	// set Mode0 to 32-bit counter (mode 0) with prescaler 1 and GCLK2 is 32KHz/1
-	sam.RTC_MODE0.CTRL = sam.RegValue16((sam.RTC_MODE0_CTRL_MODE_COUNT32 << sam.RTC_MODE0_CTRL_MODE_Pos) |
+	sam.RTC_MODE0.CTRL.Set((sam.RTC_MODE0_CTRL_MODE_COUNT32 << sam.RTC_MODE0_CTRL_MODE_Pos) |
 		(sam.RTC_MODE0_CTRL_PRESCALER_DIV1 << sam.RTC_MODE0_CTRL_PRESCALER_Pos))
 	waitForSync()
 
 	// re-enable RTC
-	sam.RTC_MODE0.CTRL |= sam.RTC_MODE0_CTRL_ENABLE
+	sam.RTC_MODE0.CTRL.SetBits(sam.RTC_MODE0_CTRL_ENABLE)
 	waitForSync()
 
 	arm.SetPriority(sam.IRQ_RTC, 0xc0)
@@ -218,7 +218,7 @@ func initRTC() {
 }
 
 func waitForSync() {
-	for (sam.GCLK.STATUS & sam.GCLK_STATUS_SYNCBUSY) > 0 {
+	for sam.GCLK.STATUS.HasBits(sam.GCLK_STATUS_SYNCBUSY) {
 	}
 }
 
@@ -250,11 +250,11 @@ func sleepTicks(d timeUnit) {
 // ticks returns number of microseconds since start.
 func ticks() timeUnit {
 	// request read of count
-	sam.RTC_MODE0.READREQ = sam.RTC_MODE0_READREQ_RREQ
+	sam.RTC_MODE0.READREQ.Set(sam.RTC_MODE0_READREQ_RREQ)
 	waitForSync()
 
-	rtcCounter := (uint64(sam.RTC_MODE0.COUNT) * 305) / 10 // each counter tick == 30.5us
+	rtcCounter := (uint64(sam.RTC_MODE0.COUNT.Get()) * 305) / 10 // each counter tick == 30.5us
-	offset := (rtcCounter - timerLastCounter)              // change since last measurement
+	offset := (rtcCounter - timerLastCounter)                    // change since last measurement
 	timerLastCounter = rtcCounter
 	timestamp += timeUnit(offset) // TODO: not precise
 	return timestamp
@@ -269,16 +269,16 @@ func timerSleep(ticks uint32) {
 	}
 
 	// request read of count
-	sam.RTC_MODE0.READREQ = sam.RTC_MODE0_READREQ_RREQ
+	sam.RTC_MODE0.READREQ.Set(sam.RTC_MODE0_READREQ_RREQ)
 	waitForSync()
 
 	// set compare value
-	cnt := sam.RTC_MODE0.COUNT
+	cnt := sam.RTC_MODE0.COUNT.Get()
-	sam.RTC_MODE0.COMP0 = sam.RegValue(uint32(cnt) + (ticks * 10 / 305)) // each counter tick == 30.5us
+	sam.RTC_MODE0.COMP0.Set(uint32(cnt) + (ticks * 10 / 305)) // each counter tick == 30.5us
 	waitForSync()
 
 	// enable IRQ for CMP0 compare
-	sam.RTC_MODE0.INTENSET |= sam.RTC_MODE0_INTENSET_CMP0
+	sam.RTC_MODE0.INTENSET.SetBits(sam.RTC_MODE0_INTENSET_CMP0)
 
 	for !timerWakeup {
 		arm.Asm("wfi")
@@ -288,70 +288,17 @@ func timerSleep(ticks uint32) {
 //go:export RTC_IRQHandler
 func handleRTC() {
 	// disable IRQ for CMP0 compare
-	sam.RTC_MODE0.INTFLAG = sam.RTC_MODE0_INTENSET_CMP0
+	sam.RTC_MODE0.INTFLAG.Set(sam.RTC_MODE0_INTENSET_CMP0)
 
 	timerWakeup = true
 }
 
-func initSERCOMClocks() {
-	// Turn on clock to SERCOM0 for UART0
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM0_
-
-	// Use GCLK0 for SERCOM0 aka UART0
-	// GCLK_CLKCTRL_ID( clockId ) | // Generic Clock 0 (SERCOMx)
-	// GCLK_CLKCTRL_GEN_GCLK0 | // Generic Clock Generator 0 is source
-	// GCLK_CLKCTRL_CLKEN ;
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM0_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-
-	// Turn on clock to SERCOM1
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM1_
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM1_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-
-	// Turn on clock to SERCOM2
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM2_
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM2_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-
-	// Turn on clock to SERCOM3
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM3_
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM3_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-
-	// Turn on clock to SERCOM4
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM4_
-
-	// Use GCLK0 for SERCOM4
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM4_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-
-	// Turn on clock to SERCOM5
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_SERCOM5_
-
-	// Use GCLK0 for SERCOM5
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_SERCOM5_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
-		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
-		sam.GCLK_CLKCTRL_CLKEN)
-	waitForSync()
-}
-
 func initUSBClock() {
 	// Turn on clock for USB
-	sam.PM.APBBMASK |= sam.PM_APBBMASK_USB_
+	sam.PM.APBBMASK.SetBits(sam.PM_APBBMASK_USB_)
 
 	// Put Generic Clock Generator 0 as source for Generic Clock Multiplexer 6 (USB reference)
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_USB << sam.GCLK_CLKCTRL_ID_Pos) |
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_USB << sam.GCLK_CLKCTRL_ID_Pos) |
 		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
 		sam.GCLK_CLKCTRL_CLKEN)
 	waitForSync()
@@ -359,10 +306,10 @@ func initUSBClock() {
 
 func initADCClock() {
 	// Turn on clock for ADC
-	sam.PM.APBCMASK |= sam.PM_APBCMASK_ADC_
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_ADC_)
 
 	// Put Generic Clock Generator 0 as source for Generic Clock Multiplexer for ADC.
-	sam.GCLK.CLKCTRL = sam.RegValue16((sam.GCLK_CLKCTRL_ID_ADC << sam.GCLK_CLKCTRL_ID_Pos) |
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_ADC << sam.GCLK_CLKCTRL_ID_Pos) |
 		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
 		sam.GCLK_CLKCTRL_CLKEN)
 	waitForSync()

src/runtime/runtime_atsamd21e18.go

@@ -0,0 +1,42 @@
+// +build sam,atsamd21,atsamd21e18
+
+package runtime
+
+import (
+	"device/sam"
+)
+
+func initSERCOMClocks() {
+	// Turn on clock to SERCOM0 for UART0
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM0_)
+
+	// Use GCLK0 for SERCOM0 aka UART0
+	// GCLK_CLKCTRL_ID( clockId ) | // Generic Clock 0 (SERCOMx)
+	// GCLK_CLKCTRL_GEN_GCLK0 | // Generic Clock Generator 0 is source
+	// GCLK_CLKCTRL_CLKEN ;
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM0_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM1
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM1_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM1_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM2
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM2_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM2_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM3
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM3_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM3_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+}

src/runtime/runtime_atsamd21g18.go

@@ -0,0 +1,60 @@
+// +build sam,atsamd21,atsamd21g18
+
+package runtime
+
+import (
+	"device/sam"
+)
+
+func initSERCOMClocks() {
+	// Turn on clock to SERCOM0 for UART0
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM0_)
+
+	// Use GCLK0 for SERCOM0 aka UART0
+	// GCLK_CLKCTRL_ID( clockId ) | // Generic Clock 0 (SERCOMx)
+	// GCLK_CLKCTRL_GEN_GCLK0 | // Generic Clock Generator 0 is source
+	// GCLK_CLKCTRL_CLKEN ;
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM0_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM1
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM1_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM1_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM2
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM2_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM2_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM3
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM3_)
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM3_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM4
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM4_)
+
+	// Use GCLK0 for SERCOM4
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM4_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+
+	// Turn on clock to SERCOM5
+	sam.PM.APBCMASK.SetBits(sam.PM_APBCMASK_SERCOM5_)
+
+	// Use GCLK0 for SERCOM5
+	sam.GCLK.CLKCTRL.Set((sam.GCLK_CLKCTRL_ID_SERCOM5_CORE << sam.GCLK_CLKCTRL_ID_Pos) |
+		(sam.GCLK_CLKCTRL_GEN_GCLK0 << sam.GCLK_CLKCTRL_GEN_Pos) |
+		sam.GCLK_CLKCTRL_CLKEN)
+	waitForSync()
+}

src/runtime/runtime_cortexm.go

@@ -41,11 +41,61 @@ func preinit() {
 }
 
 func abort() {
+	// disable all interrupts
+	arm.DisableInterrupts()
+
+	// lock up forever
 	for {
 		arm.Asm("wfi")
 	}
 }
 
+// The stack layout at the moment an interrupt occurs.
+// Registers can be accessed if the stack pointer is cast to a pointer to this
+// struct.
+type interruptStack struct {
+	R0  uintptr
+	R1  uintptr
+	R2  uintptr
+	R3  uintptr
+	R12 uintptr
+	LR  uintptr
+	PC  uintptr
+	PSR uintptr
+}
+
+// This function is called at HardFault.
+// Before this function is called, the stack pointer is reset to the initial
+// stack pointer (loaded from addres 0x0) and the previous stack pointer is
+// passed as an argument to this function. This allows for easy inspection of
+// the stack the moment a HardFault occurs, but it means that the stack will be
+// corrupted by this function and thus this handler must not attempt to recover.
+//
+// For details, see:
+// https://community.arm.com/developer/ip-products/system/f/embedded-forum/3257/debugging-a-cortex-m0-hard-fault
+// https://blog.feabhas.com/2013/02/developing-a-generic-hard-fault-handler-for-arm-cortex-m3cortex-m4/
+//go:export handleHardFault
+func handleHardFault(sp *interruptStack) {
+	print("fatal error: ")
+	if uintptr(unsafe.Pointer(sp)) < 0x20000000 {
+		print("stack overflow")
+	} else {
+		// TODO: try to find the cause of the hard fault. Especially on
+		// Cortex-M3 and higher it is possible to find more detailed information
+		// in special status registers.
+		print("HardFault")
+	}
+	print(" with sp=", sp)
+	if uintptr(unsafe.Pointer(&sp.PC)) >= 0x20000000 {
+		// Only print the PC if it points into memory.
+		// It may not point into memory during a stack overflow, so check that
+		// first before accessing the stack.
+		print(" pc=", sp.PC)
+	}
+	println()
+	abort()
+}
+
 // Implement memset for LLVM and compiler-rt.
 //go:export memset
 func libc_memset(ptr unsafe.Pointer, c byte, size uintptr) {

src/runtime/runtime_nrf.go

@@ -32,16 +32,16 @@ func init() {
 
 func initLFCLK() {
 	if machine.HasLowFrequencyCrystal {
-		nrf.CLOCK.LFCLKSRC = nrf.CLOCK_LFCLKSTAT_SRC_Xtal
+		nrf.CLOCK.LFCLKSRC.Set(nrf.CLOCK_LFCLKSTAT_SRC_Xtal)
 	}
-	nrf.CLOCK.TASKS_LFCLKSTART = 1
+	nrf.CLOCK.TASKS_LFCLKSTART.Set(1)
-	for nrf.CLOCK.EVENTS_LFCLKSTARTED == 0 {
+	for nrf.CLOCK.EVENTS_LFCLKSTARTED.Get() == 0 {
 	}
-	nrf.CLOCK.EVENTS_LFCLKSTARTED = 0
+	nrf.CLOCK.EVENTS_LFCLKSTARTED.Set(0)
 }
 
 func initRTC() {
-	nrf.RTC1.TASKS_START = 1
+	nrf.RTC1.TASKS_START.Set(1)
 	arm.SetPriority(nrf.IRQ_RTC1, 0xc0) // low priority
 	arm.EnableIRQ(nrf.IRQ_RTC1)
 }
@@ -72,7 +72,7 @@ var (
 // overflow the counter, leading to incorrect results. This might be fixed by
 // handling the overflow event.
 func ticks() timeUnit {
-	rtcCounter := uint32(nrf.RTC1.COUNTER)
+	rtcCounter := uint32(nrf.RTC1.COUNTER.Get())
 	offset := (rtcCounter - rtcLastCounter) & 0xffffff // change since last measurement
 	rtcLastCounter = rtcCounter
 	timestamp += timeUnit(offset) // TODO: not precise
@@ -85,7 +85,7 @@ type isrFlag bool
 var rtc_wakeup isrFlag
 
 func rtc_sleep(ticks uint32) {
-	nrf.RTC1.INTENSET = nrf.RTC_INTENSET_COMPARE0
+	nrf.RTC1.INTENSET.Set(nrf.RTC_INTENSET_COMPARE0)
 	rtc_wakeup = false
 	if ticks == 1 {
 		// Race condition (even in hardware) at ticks == 1.
@@ -93,7 +93,7 @@ func rtc_sleep(ticks uint32) {
 		// describes.
 		ticks = 2
 	}
-	nrf.RTC1.CC[0] = (nrf.RTC1.COUNTER + nrf.RegValue(ticks)) & 0x00ffffff
+	nrf.RTC1.CC[0].Set((nrf.RTC1.COUNTER.Get() + ticks) & 0x00ffffff)
 	for !rtc_wakeup {
 		arm.Asm("wfi")
 	}
@@ -101,7 +101,7 @@ func rtc_sleep(ticks uint32) {
 
 //go:export RTC1_IRQHandler
 func handleRTC1() {
-	nrf.RTC1.INTENCLR = nrf.RTC_INTENSET_COMPARE0
+	nrf.RTC1.INTENCLR.Set(nrf.RTC_INTENSET_COMPARE0)
-	nrf.RTC1.EVENTS_COMPARE[0] = 0
+	nrf.RTC1.EVENTS_COMPARE[0].Set(0)
 	rtc_wakeup = true
 }

src/runtime/runtime_stm32f103xx.go

@@ -21,33 +21,33 @@ func putchar(c byte) {
 
 // initCLK sets clock to 72MHz using HSE 8MHz crystal w/ PLL X 9 (8MHz x 9 = 72MHz).
 func initCLK() {
-	stm32.FLASH.ACR |= stm32.FLASH_ACR_LATENCY_2    // Two wait states, per datasheet
+	stm32.FLASH.ACR.SetBits(stm32.FLASH_ACR_LATENCY_2)    // Two wait states, per datasheet
-	stm32.RCC.CFGR |= stm32.RCC_CFGR_PPRE1_DIV_2    // prescale PCLK1 = HCLK/2
+	stm32.RCC.CFGR.SetBits(stm32.RCC_CFGR_PPRE1_DIV_2)    // prescale PCLK1 = HCLK/2
-	stm32.RCC.CFGR |= stm32.RCC_CFGR_PPRE2_DIV_NONE // prescale PCLK2 = HCLK/1
+	stm32.RCC.CFGR.SetBits(stm32.RCC_CFGR_PPRE2_DIV_NONE) // prescale PCLK2 = HCLK/1
-	stm32.RCC.CR |= stm32.RCC_CR_HSEON              // enable HSE clock
+	stm32.RCC.CR.SetBits(stm32.RCC_CR_HSEON)              // enable HSE clock
 
 	// wait for the HSEREADY flag
-	for (stm32.RCC.CR & stm32.RCC_CR_HSERDY) == 0 {
+	for !stm32.RCC.CR.HasBits(stm32.RCC_CR_HSERDY) {
 	}
 
-	stm32.RCC.CR |= stm32.RCC_CR_HSION // enable HSI clock
+	stm32.RCC.CR.SetBits(stm32.RCC_CR_HSION) // enable HSI clock
 
 	// wait for the HSIREADY flag
-	for (stm32.RCC.CR & stm32.RCC_CR_HSIRDY) == 0 {
+	for !stm32.RCC.CR.HasBits(stm32.RCC_CR_HSIRDY) {
 	}
 
-	stm32.RCC.CFGR |= stm32.RCC_CFGR_PLLSRC   // set PLL source to HSE
+	stm32.RCC.CFGR.SetBits(stm32.RCC_CFGR_PLLSRC)   // set PLL source to HSE
-	stm32.RCC.CFGR |= stm32.RCC_CFGR_PLLMUL_9 // multiply by 9
+	stm32.RCC.CFGR.SetBits(stm32.RCC_CFGR_PLLMUL_9) // multiply by 9
-	stm32.RCC.CR |= stm32.RCC_CR_PLLON        // enable the PLL
+	stm32.RCC.CR.SetBits(stm32.RCC_CR_PLLON)        // enable the PLL
 
 	// wait for the PLLRDY flag
-	for (stm32.RCC.CR & stm32.RCC_CR_PLLRDY) == 0 {
+	for !stm32.RCC.CR.HasBits(stm32.RCC_CR_PLLRDY) {
 	}
 
-	stm32.RCC.CFGR |= stm32.RCC_CFGR_SW_PLL // set clock source to pll
+	stm32.RCC.CFGR.SetBits(stm32.RCC_CFGR_SW_PLL) // set clock source to pll
 
 	// wait for PLL to be CLK
-	for (stm32.RCC.CFGR & stm32.RCC_CFGR_SWS_PLL) == 0 {
+	for !stm32.RCC.CFGR.HasBits(stm32.RCC_CFGR_SWS_PLL) {
 	}
 }
 
@@ -65,43 +65,43 @@ var timerWakeup isrFlag
 
 func initRTC() {
 	// Enable the PWR and BKP.
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_PWREN | stm32.RCC_APB1ENR_BKPEN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_PWREN | stm32.RCC_APB1ENR_BKPEN)
 
 	// access to backup register
-	stm32.PWR.CR |= stm32.PWR_CR_DBP
+	stm32.PWR.CR.SetBits(stm32.PWR_CR_DBP)
 
 	// Enable LSE
-	stm32.RCC.BDCR |= stm32.RCC_BDCR_LSEON
+	stm32.RCC.BDCR.SetBits(stm32.RCC_BDCR_LSEON)
 
 	// wait until LSE is ready
-	for stm32.RCC.BDCR&stm32.RCC_BDCR_LSERDY == 0 {
+	for !stm32.RCC.BDCR.HasBits(stm32.RCC_BDCR_LSERDY) {
 	}
 
 	// Select LSE
-	stm32.RCC.BDCR |= stm32.RCC_RTCCLKSource_LSE
+	stm32.RCC.BDCR.SetBits(stm32.RCC_RTCCLKSource_LSE)
 
 	// set prescaler to "max" per datasheet
-	stm32.RTC.PRLH = stm32.RTC_PRLH_PRLH_Msk
+	stm32.RTC.PRLH.Set(stm32.RTC_PRLH_PRLH_Msk)
-	stm32.RTC.PRLL = stm32.RTC_PRLL_PRLL_Msk
+	stm32.RTC.PRLL.Set(stm32.RTC_PRLL_PRLL_Msk)
 
 	// set count to zero
-	stm32.RTC.CNTH = 0x0
+	stm32.RTC.CNTH.Set(0x0)
-	stm32.RTC.CNTL = 0x0
+	stm32.RTC.CNTL.Set(0x0)
 
 	// Enable RTC
-	stm32.RCC.BDCR |= stm32.RCC_BDCR_RTCEN
+	stm32.RCC.BDCR.SetBits(stm32.RCC_BDCR_RTCEN)
 
 	// Clear RSF
-	stm32.RTC.CRL &^= stm32.RTC_CRL_RSF
+	stm32.RTC.CRL.ClearBits(stm32.RTC_CRL_RSF)
 
 	// Wait till flag is set
-	for stm32.RTC.CRL&stm32.RTC_CRL_RSF == 0 {
+	for !stm32.RTC.CRL.HasBits(stm32.RTC_CRL_RSF) {
 	}
 }
 
 // Enable the TIM3 clock.
 func initTIM() {
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_TIM3EN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_TIM3EN)
 
 	arm.SetPriority(stm32.IRQ_TIM3, 0xc3)
 	arm.EnableIRQ(stm32.IRQ_TIM3)
@@ -122,10 +122,10 @@ func sleepTicks(d timeUnit) {
 // number of ticks (microseconds) since start.
 func ticks() timeUnit {
 	// convert RTC counter from seconds to microseconds
-	timerCounter := uint64(stm32.RTC.CNTH<<16|stm32.RTC.CNTL) * 1000 * 1000
+	timerCounter := uint64(stm32.RTC.CNTH.Get()<<16|stm32.RTC.CNTL.Get()) * 1000 * 1000
 
 	// add the fractional part of current time using DIV register
-	timerCounter += uint64(0x8000-stm32.RTC.DIVL) * 31
+	timerCounter += uint64(0x8000-stm32.RTC.DIVL.Get()) * 31
 
 	// change since last measurement
 	offset := (timerCounter - timerLastCounter)
@@ -165,16 +165,16 @@ func timerSleep(ticks uint32) {
 	// The current scaling only supports a range of 100 usec to 6553 msec.
 
 	// prescale counter down from 72mhz to 10khz aka 0.1 ms frequency.
-	stm32.TIM3.PSC = machine.CPU_FREQUENCY/10000 - 1 // 7199
+	stm32.TIM3.PSC.Set(machine.CPU_FREQUENCY/10000 - 1) // 7199
 
 	// set duty aka duration
-	stm32.TIM3.ARR = stm32.RegValue(ticks/100) - 1 // convert from microseconds to 0.1 ms
+	stm32.TIM3.ARR.Set(ticks/100 - 1) // convert from microseconds to 0.1 ms
 
 	// Enable the hardware interrupt.
-	stm32.TIM3.DIER |= stm32.TIM_DIER_UIE
+	stm32.TIM3.DIER.SetBits(stm32.TIM_DIER_UIE)
 
 	// Enable the timer.
-	stm32.TIM3.CR1 |= stm32.TIM_CR1_CEN
+	stm32.TIM3.CR1.SetBits(stm32.TIM_CR1_CEN)
 
 	// wait till timer wakes up
 	for !timerWakeup {
@@ -184,12 +184,12 @@ func timerSleep(ticks uint32) {
 
 //go:export TIM3_IRQHandler
 func handleTIM3() {
-	if (stm32.TIM3.SR & stm32.TIM_SR_UIF) > 0 {
+	if stm32.TIM3.SR.HasBits(stm32.TIM_SR_UIF) {
 		// Disable the timer.
-		stm32.TIM3.CR1 &^= stm32.TIM_CR1_CEN
+		stm32.TIM3.CR1.ClearBits(stm32.TIM_CR1_CEN)
 
 		// clear the update flag
-		stm32.TIM3.SR &^= stm32.TIM_SR_UIF
+		stm32.TIM3.SR.ClearBits(stm32.TIM_SR_UIF)
 
 		// timer was triggered
 		timerWakeup = true

src/runtime/runtime_stm32f407.go

@@ -42,58 +42,59 @@ func initCLK() {
 
 	// Reset clock registers
 	// Set HSION
-	stm32.RCC.CR |= stm32.RCC_CR_HSION
+	stm32.RCC.CR.SetBits(stm32.RCC_CR_HSION)
-	for (stm32.RCC.CR & stm32.RCC_CR_HSIRDY) == 0 {
+	for !stm32.RCC.CR.HasBits(stm32.RCC_CR_HSIRDY) {
 	}
 
 	// Reset CFGR
-	stm32.RCC.CFGR = 0x00000000
+	stm32.RCC.CFGR.Set(0x00000000)
 	// Reset HSEON, CSSON and PLLON
-	stm32.RCC.CR &= 0xFEF6FFFF
+	stm32.RCC.CR.ClearBits(stm32.RCC_CR_HSEON | stm32.RCC_CR_CSSON | stm32.RCC_CR_PLLON)
 	// Reset PLLCFGR
-	stm32.RCC.PLLCFGR = 0x24003010
+	stm32.RCC.PLLCFGR.Set(0x24003010)
 	// Reset HSEBYP
-	stm32.RCC.CR &= 0xFFFBFFFF
+	stm32.RCC.CR.ClearBits(stm32.RCC_CR_HSEBYP)
 	// Disable all interrupts
-	stm32.RCC.CIR = 0x00000000
+	stm32.RCC.CIR.Set(0x00000000)
 
 	// Set up the clock
 	var startupCounter uint32 = 0
 
 	// Enable HSE
-	stm32.RCC.CR = stm32.RCC_CR_HSEON
+	stm32.RCC.CR.Set(stm32.RCC_CR_HSEON)
+
 	// Wait till HSE is ready and if timeout is reached exit
 	for {
 		startupCounter++
-		if (stm32.RCC.CR&stm32.RCC_CR_HSERDY != 0) || (startupCounter == HSE_STARTUP_TIMEOUT) {
+		if stm32.RCC.CR.HasBits(stm32.RCC_CR_HSERDY) || (startupCounter == HSE_STARTUP_TIMEOUT) {
 			break
 		}
 	}
-	if (stm32.RCC.CR & stm32.RCC_CR_HSERDY) != 0 {
+	if stm32.RCC.CR.HasBits(stm32.RCC_CR_HSERDY) {
 		// Enable high performance mode, System frequency up to 168MHz
-		stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_PWREN
+		stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_PWREN)
-		stm32.PWR.CR |= 0x4000 // PWR_CR_VOS
+		stm32.PWR.CR.SetBits(0x4000) // PWR_CR_VOS
 		// HCLK = SYSCLK / 1
-		stm32.RCC.CFGR |= (0x0 << stm32.RCC_CFGR_HPRE_Pos)
+		stm32.RCC.CFGR.SetBits(0x0 << stm32.RCC_CFGR_HPRE_Pos)
 		// PCLK2 = HCLK / 2
-		stm32.RCC.CFGR |= (0x4 << stm32.RCC_CFGR_PPRE2_Pos)
+		stm32.RCC.CFGR.SetBits(0x4 << stm32.RCC_CFGR_PPRE2_Pos)
 		// PCLK1 = HCLK / 4
-		stm32.RCC.CFGR |= (0x5 << stm32.RCC_CFGR_PPRE1_Pos)
+		stm32.RCC.CFGR.SetBits(0x5 << stm32.RCC_CFGR_PPRE1_Pos)
 		// Configure the main PLL
 		// PLL Options - See RM0090 Reference Manual pg. 95
-		stm32.RCC.PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) - 1) << 16) |
+		stm32.RCC.PLLCFGR.Set(PLL_M | (PLL_N << 6) | (((PLL_P >> 1) - 1) << 16) |
-			(1 << stm32.RCC_PLLCFGR_PLLSRC_Pos) | (PLL_Q << 24)
+			(1 << stm32.RCC_PLLCFGR_PLLSRC_Pos) | (PLL_Q << 24))
 		// Enable main PLL
-		stm32.RCC.CR |= stm32.RCC_CR_PLLON
+		stm32.RCC.CR.SetBits(stm32.RCC_CR_PLLON)
 		// Wait till the main PLL is ready
-		for (stm32.RCC.CR & stm32.RCC_CR_PLLRDY) == 0 {
+		for (stm32.RCC.CR.Get() & stm32.RCC_CR_PLLRDY) == 0 {
 		}
 		// Configure Flash prefetch, Instruction cache, Data cache and wait state
-		stm32.FLASH.ACR = stm32.FLASH_ACR_ICEN | stm32.FLASH_ACR_DCEN | (5 << stm32.FLASH_ACR_LATENCY_Pos)
+		stm32.FLASH.ACR.Set(stm32.FLASH_ACR_ICEN | stm32.FLASH_ACR_DCEN | (5 << stm32.FLASH_ACR_LATENCY_Pos))
 		// Select the main PLL as system clock source
-		stm32.RCC.CFGR &^= stm32.RCC_CFGR_SW0 | stm32.RCC_CFGR_SW1
+		stm32.RCC.CFGR.ClearBits(stm32.RCC_CFGR_SW0 | stm32.RCC_CFGR_SW1)
-		stm32.RCC.CFGR |= (0x2 << stm32.RCC_CFGR_SW0_Pos)
+		stm32.RCC.CFGR.SetBits(0x2 << stm32.RCC_CFGR_SW0_Pos)
-		for (stm32.RCC.CFGR & (0x3 << stm32.RCC_CFGR_SWS0_Pos)) != (0x2 << stm32.RCC_CFGR_SWS0_Pos) {
+		for (stm32.RCC.CFGR.Get() & (0x3 << stm32.RCC_CFGR_SWS0_Pos)) != (0x2 << stm32.RCC_CFGR_SWS0_Pos) {
 		}
 
 	} else {
@@ -102,7 +103,7 @@ func initCLK() {
 		}
 	}
 	// Enable the CCM RAM clock
-	stm32.RCC.AHB1ENR |= (1 << 20)
+	stm32.RCC.AHB1ENR.SetBits(1 << 20)
 
 }
 
@@ -120,7 +121,7 @@ var timerWakeup isrFlag
 
 // Enable the TIM3 clock.(sleep count)
 func initTIM3() {
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_TIM3EN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_TIM3EN)
 
 	arm.SetPriority(stm32.IRQ_TIM3, 0xc3)
 	arm.EnableIRQ(stm32.IRQ_TIM3)
@@ -128,17 +129,17 @@ func initTIM3() {
 
 // Enable the TIM7 clock.(tick count)
 func initTIM7() {
-	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_TIM7EN
+	stm32.RCC.APB1ENR.SetBits(stm32.RCC_APB1ENR_TIM7EN)
 
 	// CK_INT = APB1 x2 = 84mhz
-	stm32.TIM7.PSC = 84000000/10000 - 1     // 84mhz to 10khz(0.1ms)
+	stm32.TIM7.PSC.Set(84000000/10000 - 1) // 84mhz to 10khz(0.1ms)
-	stm32.TIM7.ARR = stm32.RegValue(10) - 1 // interrupt per 1ms
+	stm32.TIM7.ARR.Set(10 - 1)             // interrupt per 1ms
 
 	// Enable the hardware interrupt.
-	stm32.TIM7.DIER |= stm32.TIM_DIER_UIE
+	stm32.TIM7.DIER.SetBits(stm32.TIM_DIER_UIE)
 
 	// Enable the timer.
-	stm32.TIM7.CR1 |= stm32.TIM_CR1_CEN
+	stm32.TIM7.CR1.SetBits(stm32.TIM_CR1_CEN)
 
 	arm.SetPriority(stm32.IRQ_TIM7, 0xc1)
 	arm.EnableIRQ(stm32.IRQ_TIM7)
@@ -163,20 +164,20 @@ func timerSleep(ticks uint32) {
 
 	// CK_INT = APB1 x2 = 84mhz
 	// prescale counter down from 84mhz to 10khz aka 0.1 ms frequency.
-	stm32.TIM3.PSC = 84000000/10000 - 1 // 8399
+	stm32.TIM3.PSC.Set(84000000/10000 - 1) // 8399
 
 	// set duty aka duration
 	arr := (ticks / 100) - 1 // convert from microseconds to 0.1 ms
 	if arr == 0 {
 		arr = 1 // avoid blocking
 	}
-	stm32.TIM3.ARR = stm32.RegValue(arr)
+	stm32.TIM3.ARR.Set(arr)
 
 	// Enable the hardware interrupt.
-	stm32.TIM3.DIER |= stm32.TIM_DIER_UIE
+	stm32.TIM3.DIER.SetBits(stm32.TIM_DIER_UIE)
 
 	// Enable the timer.
-	stm32.TIM3.CR1 |= stm32.TIM_CR1_CEN
+	stm32.TIM3.CR1.SetBits(stm32.TIM_CR1_CEN)
 
 	// wait till timer wakes up
 	for !timerWakeup {
@@ -186,12 +187,12 @@ func timerSleep(ticks uint32) {
 
 //go:export TIM3_IRQHandler
 func handleTIM3() {
-	if (stm32.TIM3.SR & stm32.TIM_SR_UIF) > 0 {
+	if stm32.TIM3.SR.HasBits(stm32.TIM_SR_UIF) {
 		// Disable the timer.
-		stm32.TIM3.CR1 &^= stm32.TIM_CR1_CEN
+		stm32.TIM3.CR1.ClearBits(stm32.TIM_CR1_CEN)
 
 		// clear the update flag
-		stm32.TIM3.SR &^= stm32.TIM_SR_UIF
+		stm32.TIM3.SR.ClearBits(stm32.TIM_SR_UIF)
 
 		// timer was triggered
 		timerWakeup = true
@@ -200,9 +201,9 @@ func handleTIM3() {
 
 //go:export TIM7_IRQHandler
 func handleTIM7() {
-	if (stm32.TIM7.SR & stm32.TIM_SR_UIF) > 0 {
+	if stm32.TIM7.SR.HasBits(stm32.TIM_SR_UIF) {
 		// clear the update flag
-		stm32.TIM7.SR &^= stm32.TIM_SR_UIF
+		stm32.TIM7.SR.ClearBits(stm32.TIM_SR_UIF)
 		tickCount++
 	}
 }

src/runtime/runtime_unix.go

@@ -18,6 +18,9 @@ func malloc(size uintptr) unsafe.Pointer
 //go:export abort
 func abort()
 
+//go:export exit
+func exit(code int)
+
 //go:export clock_gettime
 func clock_gettime(clk_id uint, ts *timespec)
 
@@ -75,3 +78,8 @@ func monotime() uint64 {
 func ticks() timeUnit {
 	return timeUnit(monotime())
 }
+
+//go:linkname syscall_Exit syscall.Exit
+func syscall_Exit(code int) {
+	exit(code)
+}

src/runtime/runtime_wasm.go

@@ -37,9 +37,16 @@ func putchar(c byte) {
 	resource_write(stdout, &c, 1)
 }
 
+var handleEvent func()
+
 //go:linkname setEventHandler syscall/js.setEventHandler
 func setEventHandler(fn func()) {
-	// TODO
+	handleEvent = fn
+}
+
+//go:export resume
+func resume() {
+	handleEvent()
 }
 
 //go:export go_scheduler

src/runtime/scheduler.go

@@ -120,6 +120,9 @@ func setTaskPromisePtr(task *coroutine, value unsafe.Pointer) {
 // getTaskPromisePtr is a helper function to get the current .ptr field from a
 // coroutine promise.
 func getTaskPromisePtr(task *coroutine) unsafe.Pointer {
+	if task == nil {
+		blockingPanic()
+	}
 	return task.promise().ptr
 }
 

src/runtime/string.go

@@ -166,9 +166,10 @@ func decodeUTF8(s string, index uintptr) (rune, uintptr) {
 	}
 }
 
-// indexByte returns the index of the first instance of c in s, or -1 if c is not present in s.
+// indexByteString returns the index of the first instance of c in s, or -1 if c
-//go:linkname indexByte strings.IndexByte
+// is not present in s.
-func indexByte(s string, c byte) int {
+//go:linkname indexByteString internal/bytealg.IndexByteString
+func indexByteString(s string, c byte) int {
 	for i := 0; i < len(s); i++ {
 		if s[i] == c {
 			return i

src/runtime/strings_go111.go

@@ -0,0 +1,12 @@
+// +build !go1.12
+
+package runtime
+
+// indexByte provides compatibility with Go 1.11.
+// See the following:
+// https://github.com/tinygo-org/tinygo/issues/351
+// https://github.com/golang/go/commit/ad4a58e31501bce5de2aad90a620eaecdc1eecb8
+//go:linkname indexByte strings.IndexByte
+func indexByte(s string, c byte) int {
+	return indexByteString(s, c)
+}

target.go

@@ -5,11 +5,13 @@ import (
 	"errors"
 	"fmt"
 	"io"
+	"io/ioutil"
 	"os"
 	"os/exec"
 	"os/user"
 	"path/filepath"
 	"runtime"
+	"strconv"
 	"strings"
 )
 
@@ -22,6 +24,7 @@ type TargetSpec struct {
 	Inherits   []string `json:"inherits"`
 	Triple     string   `json:"llvm-target"`
 	CPU        string   `json:"cpu"`
+	Features   []string `json:"features"`
 	GOOS       string   `json:"goos"`
 	GOARCH     string   `json:"goarch"`
 	BuildTags  []string `json:"build-tags"`
@@ -50,6 +53,7 @@ func (spec *TargetSpec) copyProperties(spec2 *TargetSpec) {
 	if spec2.CPU != "" {
 		spec.CPU = spec2.CPU
 	}
+	spec.Features = append(spec.Features, spec2.Features...)
 	if spec2.GOOS != "" {
 		spec.GOOS = spec2.GOOS
 	}
@@ -368,3 +372,26 @@ func isGoroot(goroot string) bool {
 	_, err := os.Stat(filepath.Join(goroot, "src", "runtime", "internal", "sys", "zversion.go"))
 	return err == nil
 }
+
+// getGorootVersion returns the major and minor version for a given GOROOT path.
+// If the goroot cannot be determined, (0, 0) is returned.
+func getGorootVersion(goroot string) (major, minor int) {
+	data, err := ioutil.ReadFile(filepath.Join(goroot, "VERSION"))
+	if err != nil {
+		return
+	}
+	s := string(data)
+	if s[:2] != "go" {
+		return
+	}
+	parts := strings.Split(s[2:], ".")
+	if len(parts) < 2 {
+		return
+	}
+
+	// Ignore the errors, strconv.Atoi will return 0 on most errors and we
+	// don't really handle errors here anyway.
+	major, _ = strconv.Atoi(parts[0])
+	minor, _ = strconv.Atoi(parts[1])
+	return
+}

targets/atsamd21e18a.json

@@ -0,0 +1,15 @@
+{
+	"inherits": ["cortex-m"],
+	"llvm-target": "armv6m-none-eabi",
+	"build-tags": ["atsamd21e18", "atsamd21", "sam"],
+	"cflags": [
+		"--target=armv6m-none-eabi",
+		"-Qunused-arguments"
+	],
+	"ldflags": [
+		"-T", "targets/atsamd21.ld"
+	],
+	"extra-files": [
+		"src/device/sam/atsamd21e18a.s"
+	]
+}

targets/cortex-m.json

@@ -19,5 +19,8 @@
 	"ldflags": [
 		"--gc-sections"
 	],
+	"extra-files": [
+		"src/device/arm/cortexm.s"
+	],
 	"gdb": "arm-none-eabi-gdb"
 }

targets/feather-m0.json

@@ -0,0 +1,5 @@
+{
+    "inherits": ["atsamd21g18a"],
+    "build-tags": ["sam", "atsamd21g18a", "feather_m0"],
+    "flash": "bossac -d -i -e -w -v -R --offset=0x2000 {hex}"
+}

targets/trinket-m0.json

@@ -0,0 +1,5 @@
+{
+    "inherits": ["atsamd21e18a"],
+    "build-tags": ["sam", "atsamd21e18a", "trinket_m0"],
+    "flash": "bossac -d -i -e -w -v -R --offset=0x2000 {hex}"
+}

targets/wasm.json

@@ -13,6 +13,7 @@
 	],
 	"ldflags": [
 		"--allow-undefined",
+		"--no-threads",
 		"--export-all"
 	],
 	"emulator":      ["node", "targets/wasm_exec.js"]

targets/wasm_exec.js

@@ -240,9 +240,9 @@
 					},
 
 					// func valueIndex(v ref, i int) ref
-					//"syscall/js.valueIndex": (sp) => {
+					"syscall/js.valueIndex": (ret_addr, v_addr, i) => {
-					//	storeValue(sp + 24, Reflect.get(loadValue(sp + 8), getInt64(sp + 16)));
+						storeValue(ret_addr, Reflect.get(loadValue(v_addr), i));
-					//},
+					},
 
 					// valueSetIndex(v ref, i int, x ref)
 					//"syscall/js.valueSetIndex": (sp) => {
@@ -291,9 +291,9 @@
 					},
 
 					// func valueLength(v ref) int
-					//"syscall/js.valueLength": (sp) => {
+					"syscall/js.valueLength": (v_addr) => {
-					//	setInt64(sp + 16, parseInt(loadValue(sp + 8).length));
+						return loadValue(v_addr).length;
-					//},
+					},
 
 					// valuePrepareString(v ref) (ref, int)
 					"syscall/js.valuePrepareString": (ret_addr, v_addr) => {
@@ -352,25 +352,23 @@
 			}
 		}
 
-		static _makeCallbackHelper(id, pendingCallbacks, go) {
+		_resume() {
-			return function () {
+			if (this.exited) {
-				pendingCallbacks.push({ id: id, args: arguments });
+				throw new Error("Go program has already exited");
-				go._resolveCallbackPromise();
+			}
-			};
+			this._inst.exports.resume();
+			if (this.exited) {
+				this._resolveExitPromise();
+			}
 		}
 
-		static _makeEventCallbackHelper(preventDefault, stopPropagation, stopImmediatePropagation, fn) {
+		_makeFuncWrapper(id) {
-			return function (event) {
+			const go = this;
-				if (preventDefault) {
+			return function () {
-					event.preventDefault();
+				const event = { id: id, this: this, args: arguments };
-				}
+				go._pendingEvent = event;
-				if (stopPropagation) {
+				go._resume();
-					event.stopPropagation();
+				return event.result;
-				}
-				if (stopImmediatePropagation) {
-					event.stopImmediatePropagation();
-				}
-				fn(event);
 			};
 		}
 	}

testdata/cgo/main.c

@@ -17,6 +17,7 @@ int globalStructSize = sizeof(globalStruct);
 short globalArray[3] = {5, 6, 7};
 joined_t globalUnion;
 int globalUnionSize = sizeof(globalUnion);
+option_t globalOption = optionG;
 
 int fortytwo() {
 	return 42;

testdata/cgo/main.go

@@ -75,6 +75,24 @@ func main() {
 		println("n in chain:", list.n)
 		list = (*C.list_t)(list.next)
 	}
+
+	// named enum
+	var _ C.enum_option = C.optionA
+	var _ C.option_t = C.optionA
+	println("option:", C.globalOption)
+	println("option A:", C.optionA)
+	println("option B:", C.optionB)
+	println("option C:", C.optionC)
+	println("option D:", C.optionD)
+	println("option E:", C.optionE)
+	println("option F:", C.optionF)
+	println("option G:", C.optionG)
+
+	// anonymous enum
+	var _ C.option2_t = C.option2A
+	var _ C.option3_t = C.option3A
+	println("option 2A:", C.option2A)
+	println("option 3A:", C.option3A)
 }
 
 func printUnion(union C.joined_t) C.joined_t {

testdata/cgo/main.h

@@ -47,6 +47,24 @@ void unionSetShort(short s);
 void unionSetFloat(float f);
 void unionSetData(short f0, short f1, short f2);
 
+typedef enum option {
+	optionA,
+	optionB,
+	optionC = -5,
+	optionD,
+	optionE = 10,
+	optionF,
+	optionG,
+} option_t;
+
+typedef enum {
+	option2A = 20,
+} option2_t;
+
+typedef enum {
+	option3A = 21,
+} option3_t;
+
 // test globals and datatypes
 extern int global;
 extern int unusedGlobal;
@@ -66,6 +84,7 @@ extern int globalStructSize;
 extern short globalArray[3];
 extern joined_t globalUnion;
 extern int globalUnionSize;
+extern option_t globalOption;
 
 // test duplicate definitions
 int add(int a, int b);

testdata/cgo/out.txt

@@ -35,3 +35,13 @@ struct: 3 5
 n in chain: 3
 n in chain: 6
 n in chain: 7
+option: 12
+option A: 0
+option B: 1
+option C: -5
+option D: -4
+option E: 10
+option F: 11
+option G: 12
+option 2A: 20
+option 3A: 21

testdata/stdlib.go

@@ -4,12 +4,18 @@ import (
 	"fmt"
 	"math/rand"
 	"os"
+	"strings"
 )
 
 func main() {
+	// package os, fmt
 	fmt.Println("stdin: ", os.Stdin.Fd())
 	fmt.Println("stdout:", os.Stdout.Fd())
 	fmt.Println("stderr:", os.Stderr.Fd())
 
+	// package math/rand
 	fmt.Println("pseudorandom number:", rand.Int31())
+
+	// package strings
+	fmt.Println("strings.IndexByte:", strings.IndexByte("asdf", 'd'))
 }

testdata/stdlib.txt

@@ -2,3 +2,4 @@ stdin:  0
 stdout: 1
 stderr: 2
 pseudorandom number: 1298498081
+strings.IndexByte: 2

tools/gen-device-avr.py

@@ -200,6 +200,16 @@ func (r *Register8) ClearBits(value uint8) {{
 	volatile.StoreUint8(&r.Reg, volatile.LoadUint8(&r.Reg) &^ value)
 }}
 
+// HasBits reads the register and then checks to see if the passed bits are set. It
+// is the volatile equivalent of:
+//
+//     (*r.Reg & value) > 0
+//
+//go:inline
+func (r *Register8) HasBits(value uint8) bool {{
+	return (r.Get() & value) > 0
+}}
+
 // Some information about this device.
 const (
 	DEVICE     = "{name}"

tools/gen-device-svd.py

@@ -300,18 +300,168 @@ def writeGo(outdir, device):
 {licenseBlock}
 package {pkgName}
 
-import "unsafe"
+import (
+	"runtime/volatile"
+	"unsafe"
+)
 
-// Special types that cause loads/stores to be volatile (necessary for
+// Special types that causes loads/stores to be volatile (necessary for
 // memory-mapped registers).
-//go:volatile
+type Register8 struct {{
-type RegValue uint32
+	Reg uint8
+}}
 
-//go:volatile
+// Get returns the value in the register. It is the volatile equivalent of:
-type RegValue16 uint16
+//
+//     *r.Reg
+//
+//go:inline
+func (r *Register8) Get() uint8 {{
+	return volatile.LoadUint8(&r.Reg)
+}}
 
-//go:volatile
+// Set updates the register value. It is the volatile equivalent of:
-type RegValue8 uint8
+//
+//     *r.Reg = value
+//
+//go:inline
+func (r *Register8) Set(value uint8) {{
+	volatile.StoreUint8(&r.Reg, value)
+}}
+
+// SetBits reads the register, sets the given bits, and writes it back. It is
+// the volatile equivalent of:
+//
+//     r.Reg |= value
+//
+//go:inline
+func (r *Register8) SetBits(value uint8) {{
+	volatile.StoreUint8(&r.Reg, volatile.LoadUint8(&r.Reg) | value)
+}}
+
+// ClearBits reads the register, clears the given bits, and writes it back. It
+// is the volatile equivalent of:
+//
+//     r.Reg &^= value
+//
+//go:inline
+func (r *Register8) ClearBits(value uint8) {{
+	volatile.StoreUint8(&r.Reg, volatile.LoadUint8(&r.Reg) &^ value)
+}}
+
+// HasBits reads the register and then checks to see if the passed bits are set. It
+// is the volatile equivalent of:
+//
+//     (*r.Reg & value) > 0
+//
+//go:inline
+func (r *Register8) HasBits(value uint8) bool {{
+	return (r.Get() & value) > 0
+}}
+
+type Register16 struct {{
+	Reg uint16
+}}
+
+// Get returns the value in the register. It is the volatile equivalent of:
+//
+//     *r.Reg
+//
+//go:inline
+func (r *Register16) Get() uint16 {{
+	return volatile.LoadUint16(&r.Reg)
+}}
+
+// Set updates the register value. It is the volatile equivalent of:
+//
+//     *r.Reg = value
+//
+//go:inline
+func (r *Register16) Set(value uint16) {{
+	volatile.StoreUint16(&r.Reg, value)
+}}
+
+// SetBits reads the register, sets the given bits, and writes it back. It is
+// the volatile equivalent of:
+//
+//     r.Reg |= value
+//
+//go:inline
+func (r *Register16) SetBits(value uint16) {{
+	volatile.StoreUint16(&r.Reg, volatile.LoadUint16(&r.Reg) | value)
+}}
+
+// ClearBits reads the register, clears the given bits, and writes it back. It
+// is the volatile equivalent of:
+//
+//     r.Reg &^= value
+//
+//go:inline
+func (r *Register16) ClearBits(value uint16) {{
+	volatile.StoreUint16(&r.Reg, volatile.LoadUint16(&r.Reg) &^ value)
+}}
+
+// HasBits reads the register and then checks to see if the passed bits are set. It
+// is the volatile equivalent of:
+//
+//     (*r.Reg & value) > 0
+//
+//go:inline
+func (r *Register16) HasBits(value uint16) bool {{
+	return (r.Get() & value) > 0
+}}
+
+type Register32 struct {{
+	Reg uint32
+}}
+
+// Get returns the value in the register. It is the volatile equivalent of:
+//
+//     *r.Reg
+//
+//go:inline
+func (r *Register32) Get() uint32 {{
+	return volatile.LoadUint32(&r.Reg)
+}}
+
+// Set updates the register value. It is the volatile equivalent of:
+//
+//     *r.Reg = value
+//
+//go:inline
+func (r *Register32) Set(value uint32) {{
+	volatile.StoreUint32(&r.Reg, value)
+}}
+
+// SetBits reads the register, sets the given bits, and writes it back. It is
+// the volatile equivalent of:
+//
+//     r.Reg |= value
+//
+//go:inline
+func (r *Register32) SetBits(value uint32) {{
+	volatile.StoreUint32(&r.Reg, volatile.LoadUint32(&r.Reg) | value)
+}}
+
+// ClearBits reads the register, clears the given bits, and writes it back. It
+// is the volatile equivalent of:
+//
+//     r.Reg &^= value
+//
+//go:inline
+func (r *Register32) ClearBits(value uint32) {{
+	volatile.StoreUint32(&r.Reg, volatile.LoadUint32(&r.Reg) &^ value)
+}}
+
+// HasBits reads the register and then checks to see if the passed bits are set. It
+// is the volatile equivalent of:
+//
+//     (*r.Reg & value) > 0
+//
+//go:inline
+func (r *Register32) HasBits(value uint32) bool {{
+	return (r.Get() & value) > 0
+}}
 
 // Some information about this device.
 const (
@@ -349,22 +499,22 @@ const (
                 continue
             eSize = register['elementsize']
             if eSize == 4:
-                regType = 'RegValue'
+                regType = 'Register32'
             elif eSize == 2:
-                regType = 'RegValue16'
+                regType = 'Register16'
             elif eSize == 1:
-                regType = 'RegValue8'        
+                regType = 'Register8'        
             else:
                 eSize = 4
-                regType = 'RegValue'
+                regType = 'Register32'
 
             # insert padding, if needed
             if address < register['address']:
                 bytesNeeded = register['address'] - address
                 if bytesNeeded == 1:
-                    out.write('\t_padding{padNumber} {regType}\n'.format(padNumber=padNumber, regType='RegValue8'))
+                    out.write('\t_padding{padNumber} {regType}\n'.format(padNumber=padNumber, regType='Register8'))
                 elif bytesNeeded == 2:
-                    out.write('\t_padding{padNumber} {regType}\n'.format(padNumber=padNumber, regType='RegValue16'))
+                    out.write('\t_padding{padNumber} {regType}\n'.format(padNumber=padNumber, regType='Register16'))
                 else:
                     numSkip = (register['address'] - address) // eSize
                     if numSkip == 1:
@@ -381,28 +531,28 @@ const (
                 subaddress = register['address']
                 for subregister in register['registers']:
                     if subregister['elementsize'] == 4:
-                        subregType = 'RegValue'
+                        subregType = 'Register32'
                     elif subregister['elementsize'] == 2:
-                        subregType = 'RegValue16'
+                        subregType = 'Register16'
                     else:
-                        subregType = 'RegValue8'
+                        subregType = 'Register8'
 
                     if subregister['array']:
                         subregType = '[{}]{}'.format(subregister['array'], subregType)
                     if subaddress != subregister['address']:
                         bytesNeeded = subregister['address'] - subaddress
                         if bytesNeeded == 1:
-                            regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='RegValue8')
+                            regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='Register8')
                         elif bytesNeeded == 2:
-                            regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='RegValue16')
+                            regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='Register16')
                         else:
                             numSkip = (subregister['address'] - subaddress)
                             if numSkip < 1:
                                 continue
                             elif numSkip == 1:
-                                regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='RegValue8')
+                                regType += '\t\t_padding{padNumber} {subregType}\n'.format(padNumber=padNumber, subregType='Register8')
                             else:
-                                regType += '\t\t_padding{padNumber} [{num}]{subregType}\n'.format(padNumber=padNumber, num=numSkip, subregType='RegValue8')
+                                regType += '\t\t_padding{padNumber} [{num}]{subregType}\n'.format(padNumber=padNumber, num=numSkip, subregType='Register8')
                         padNumber += 1
                         subaddress += bytesNeeded
                     if subregister['array'] is not None:

version.go

@@ -2,4 +2,4 @@ package main
 
 // version of this package.
 // Update this value before release of new version of software.
-const version = "0.5.0"
+const version = "0.6.0"