* machine/attiny85: add PWM support for Timer0 and Timer1
Add complete PWM implementation for ATtiny85, supporting both Timer0
and Timer1 with their respective output channels:
- Timer0: 8-bit timer for pins PB0 (OC0A) and PB1 (OC0B)
- Timer1: 8-bit high-speed timer for pins PB1 (OC1A) and PB4 (OC1B)
Timer1 provides more flexible period control with configurable top value
(OCR1C) and extended prescaler options (1-16384), making it well-suited
for LED PWM control and other applications requiring variable frequencies.
Implements full PWM interface including Configure, SetPeriod, Channel,
Set, SetInverting, Top, Counter, and Period methods.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* machine/digispark: document PWM support on pins
Add documentation to the Digispark board file indicating which pins
support PWM output:
- P0 (PB0): Timer0 channel A
- P1 (PB1): Timer0 channel B or Timer1 channel A
- P4 (PB4): Timer1 channel B
Includes package comment explaining Timer0 vs Timer1 capabilities,
with Timer1 recommended for more flexible frequency control.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* machine/attiny85: optimize PWM prescaler lookups
Replace verbose switch statements with more efficient implementations:
- SetPeriod: Use bit shift (top >>= prescaler-1) instead of 15-case
switch for dividing uint64 by power-of-2 prescaler values
- Period: Replace switch statements with compact uint16 lookup tables
for both Timer0 and Timer1, casting to uint64 only when needed
This addresses review feedback about inefficient switch-based lookups.
On AVR, this approach is significantly smaller:
- Bit shifts for uint64 division: ~34 bytes vs ~140 bytes
- uint16 tables: 22 bytes code + 32/16 bytes data vs ~140 bytes
- Total savings: ~190 bytes (68% reduction)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* examples/pwm: add digispark support and smoketest
Add digispark.go configuration for PWM example using Timer1 with pins P1 (LED) and P4. Also add digispark PWM example to GNUmakefile smoketests.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat: Implement Lchown function for changing file ownership
- Added Lchown function to change the numeric uid and gid of a file or symbolic link.
- Included error handling to return *PathError for failed operations.
- Added unit tests for Lchown to verify behavior on different error scenarios.
* fix: fix chmod tests
Make timeoffset atomic to be able to handle changing the system
time. Otherwise the scheduler can gets rather confused if you call
AdjustTimeOffset when there are multiple goroutines already running.
Signed-off-by: deadprogram <ron@hybridgroup.com>
* - Fix SPI initialization by disabling interface before configuration.
- Ensure proper 8-bit configuration for STM32G0 SPI data register access.
- Add default pin initialization for SPI.
* Add Window Watchdog (WWDG) and ADC support for STM32G0
* Comment cleanup
* Refactored STM32G0 ADC sampling time configuration to use `switch` for improved readability
* Add STM32G0B1 target support
Introduce support for STM32G0B1 microcontrollers, including target-specific JSON files, linker scripts, and runtime initialization. This update adds hardware support for GPIO, UART, SPI, I2C, timers, and additional board-specific configurations like Nucleo-G0B1RE.
* Update STM32G0 clock initialization to 64MHz and adjust related configurations
Reconfigure STM32G0 to use a 64MHz system clock via PLL with HSI16 as the source. Update flash latency, prescaler settings, and I2C timing values to reflect the new frequency.
* Cleanup
* Cleanup
* Add STM32G0-specific UART implementation
Introduce a new UART implementation for the STM32G0 series with chip-specific setup and configuration methods. Update the generic STM32 UART code to exclude STM32G0.
* Refactor STM32G0 runtime and machine code to utilize chip-specific register access functions
Simplify and standardize register operations with dedicated setter methods in the STM32G0 runtime and machine code and cleanup redundant syntax.
* Remove redundant commented-out APBENR1 register operations in STM32G0 machine code
* Introduce FDCAN support for STM32G0B1 series
Add FDCAN peripheral implementation targeting STM32G0B1, including support for standard, extended identifiers, and bit rate configuration. Update board files to include FDCAN pins, instances, and clock configuration for Nucleo-G0B1RE and Amken Trio boards.
The GC bitmap length is measured in multiples of the pointer alignment.
This is equal to the pointer size on all architectures except AVR.
Replace the hardcoded lengths with lengths that are computed naturally.
The compiler now implements the copy builtin directly instead of calling sliceCopy.
The length is calculated with the llvm.umax.* intrinsics, and the move is performed by llvm.memmove.*.
Both of these operations are easily understood by LLVM's optimization passes.
The type's alignment is also provided to llvm.memmove.*, which is useful when rewriting the move.
Interp no longer needs to reimplement sliceCopy.
Some edge case handling was implemented by sliceCopy but not llvm.memmove.*/llvm.memcpy.*.
I copied this over, so copies of external slices should work now.
Volatile moves/copies are now run at runtime by interp.
There is a 4-byte size increase due to some confusing length logic in sendUSBPacket.
I will look at sendUSBPacket in a future PR.
This fixes two edge cases for min/max:
min/max(+0.0, -0.0) = -0.0, +0.0
min/max(number, NaN) = NaN, NaN
The compare and select method does not work here.
I switched to the llvm.minimum/llvm.maximum intrinsics which match the intended behavior.
The integer min/max were also swapped over to using intrinsics.
The compare and select path is now only used by strings.
Remove the sendUSBPacket maxLen param because this greatly confused the compiler.
It also fixes a bug where the length provided to the hardware may not match the length of the packet.
sendUSBPacket now panics if the sent packet is too big.
I also fixed some of the string descriptor logic where we could create a packet without fully populating it.
RP2* systems might require some more work since they are implemented very differently?
I don't have any of those to test with yet, so maybe someone can deal with them in a seperate PR?
The reason is that allocating without a heap is usually more visible
than using an uninitialized random generator which is subtle and may
lead to security vulnerabilities.
Based on suggestion from @eliasnaur
Signed-off-by: deadprogram <ron@hybridgroup.com>
The data to write is specififed in words, not in bytes.
This fix is needed for correctness. Without it, a
`machine.Flash.WriteAt` call can result in **data loss** since it will
overwrite more data than it should.
Now that the drivers repo and friends are intended to target the most
recent release version of TinyGo instead of the development version,
this trigger does not serve any puppose to trigger a build that will have
already been tested.
Signed-off-by: deadprogram <ron@hybridgroup.com>
ahocorasick no longer times out during interp. I don't believe
this is because we fixed a bug in interp but rather because "something"
(garbage collector fixes?) has moved the tree building to runtime.
Instead of looping over each block, we can use bit hacks to operate on an entire state byte.
I deinterleaved the state bits in order to enable these tricks.
Sweep used to count free/freed allocations/blocks.
I managed to move/remove all of these counters:
- The free space is now calculated in buildFreeRanges by adding the range lengths.
- ReadMemStats counts freed objects by subtracting live objects from allocated objects.
- gcFreedBlocks was never necessary because MemStats.HeapAlloc is the same as MemStats.HeapInUse.
The allocator originally just looped through the blocks until it found a sufficiently-long range.
This is simple, but it fragments very easily and can degrade to a full heap scan for long requests.
Instead, we now maintain a sorted nested list of free ranges by size.
The allocator will select the shortest sufficient-length range, generally reducing fragmentation.
This data structure can find a range in time directly proportional to the requested length.
This updates the stack slot pass to include callers of external functions which may access non-argument memory.
Wiithout this change, a use-after-free could occur on WASM when calling a reentrant function or switching to another goroutine.
Enabling USB consumes a lot of power. So it's better to keep it disabled
by default when the serial port is set to something other than "usb"
(USB-CDC).
On my nice!nano clone, it reduces current consumption from 1mA to
0.13mA (and most of the rest is probably consumed by a connected SCD41
sensor).
This change might break some expectations, when a board uses USB but not
USB-CDC (I think this is rare, but I didn't check specifically).
The setjmp code sets r24 to 0 and checks if it is still 0 when it finishes.
This usually works because tinygo_longjmp stores the lower half of the stack pointer into r24.
However, r24 will be set to 0 if the stack is aligned to 256 bytes when entering the setjmp.
Manually set r24 to 1 in tinygo_longjmp to fix this issue.
Loop over valid pointer locations in heap objects instead of checking if each location is valid.
The conservative scanning code is now shared between markRoots and the heap scan.
This also removes the ending alignment requirement from markRoots, since the new scan* functions do not require an aligned length.
This requirement was occasionally violated by the linux global marking code.
This saves some code space and has negligible impact on performance.
The blocks GC originally used a fixed-size stack to hold objects to scan.
When this stack overflowed, the GC would fully rescan all marked objects.
This could cause the GC to degrade to O(n^2) when scanning large linked data structures.
Instead of using a fixed-size stack, we now add a pointer field to the start of each object.
This pointer field is used to implement an unbounded linked stack.
This also consolidates the heap object scanning into one place, which simplifies the process.
This comes at the cost of introducing a pointer field to the start of the object, plus the cost of aligning the result.
This translates to:
- 16 bytes of overhead on x86/arm64 with the conservative collector
- 0 bytes of overhead on x86/arm64 with the precise collector (the layout field cost gets aligned up to 16 bytes anyway)
- 8 bytes of overhead on other 64-bit systems
- 4 bytes of overhead on 32-bit systems
- 2 bytes of overhead on AVR
VDDH is typically connected to USB (~5V) or directly to a battery.
Measuring the voltage on VDDH is a way to measure the current battery
voltage, which in turn can be useful to determine how much power is left
in the battery.
I've special cased the nrf52840 in a somewhat unusual way, maybe there
is a better way, feel free to comment!
deadprogram
Jesús Espino
Itxaka
Damian Gryski
soypat
Jake Bailey
Ayke van Laethem
Amken USA
Nia Waldvogel
gram
MakKi (makki_d)
Michael Smith