Commit Graph

506 Commits

Author SHA1 Message Date
deadprogram 0c2ab895b7 targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-04-26 15:39:50 +00:00
deadprogram 8d5b7710cf fix: use OpenOCD flash method on microbit v2 when using Nordic Semi SoftDevice
Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-04-26 15:39:39 +00:00
Ayke van Laethem abc373dc73 wasm: use int64 instead of float64 for the timeUnit
This makes wasm consistent with all the other targets, where timeUnit is
already int64.
2025-04-15 09:23:23 +02:00
Ayke van Laethem dcf609defb riscv-qemu: actually sleep in time.Sleep()
Instead of just incrementing the timestamp, this causes the system to
actually sleep when calling time.Sleep. The direct effect is that this
works as expected:

    $ tinygo run -target=riscv-qemu examples/serial
    hello world!
    hello world!
    hello world!
    [..etc]

This commit also adds a bare bones handler for exceptions (such as
invalid memory writes), since we're adding an interrupt handler anyway.

While this patch doesn't add that much functionality, having interrupt
support is going to be needed for multicore support on riscv-qemu. My
plan is to first add this support to riscv-qemu (based on the earlier
work I did for the RP2040 and demoed at FOSDEM 2025) and once the basics
are in place and fully tested we can extend this support to the RP2040.
Writing for QEMU first makes it much easier to debug any issues that
will come up.
2025-04-05 08:57:26 +02:00
Michael Smith 4768c7d431 machine/rp2350: add flash support for rp2350 (#4803)
* machine/rp2350: add flash support for rp2350
* combine duplicate files
* clean things up and group by source file
* add stubbed out xip cache clean func if needed in the future
* update flash_enable_xip_via_boot2
* remove unused macros and fix inconsistent formatting
* make flash size configurable like rp2040
* add missing flash size configs
* retain big Go CGo compatibility per #4103
* clarify CS0_SIZE source and remove single-use typedef
2025-03-16 09:45:53 +01:00
Ayke van Laethem ff2a79de7c riscv-qemu: increase stack size
Bumping the stack size to 8kb (previous was 4kb) gets most remaining
tests to pass on baremetal.
2025-03-13 06:43:39 -07:00
Ayke van Laethem cab3834bc9 riscv-qemu: add VirtIO RNG device
This implements machine.GetRNG() using VirtIO. This gets the tests to
pass for crypto/md5 and crypto/sha1 that use crypto/rand in their tests.
2025-03-11 04:22:16 -07:00
Ayke van Laethem ebf70ab18e ci: add more tests for wasm and baremetal
Run a range of tests in CI, to make sure browser wasm and baremetal
don't regress too badly.

I have intentionally filtered out tests, so that newly added tests to
TEST_PACKAGES_FAST will be added here as well (and can be excluded if
needed).
2025-03-10 03:26:30 -07:00
Egawa Takashi 64d8a04308 convert offset as signed int into unsigned int in syscall/js.stringVal in wasm_exec.js 2025-03-01 09:14:57 -08:00
deadprogram 81da7bb4c1 targets: add target for pico2-w board
Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-02-28 20:02:35 +01:00
Ron Evans 6e97079367 target: add Pimoroni Pico Plus2 (#4735)
* machine: separate definitions for ADC pins on rp2350/rp2350b

Signed-off-by: deadprogram <ron@hybridgroup.com>

* targets: add support for Pimoroni Pico Plus2

Signed-off-by: deadprogram <ron@hybridgroup.com>

---------

Signed-off-by: deadprogram <ron@hybridgroup.com>
Co-authored-by: Patricio Whittingslow <graded.sp@gmail.com>
2025-02-21 09:56:52 +01:00
soypat 9c7bbce029 rp2350: add pll generalized solution; fix ADC handles; pwm period fix 2025-02-21 09:56:52 +01:00
soypat 0ec1cb1e19 machine/rp2350: extending support to include the rp2350b 2025-02-21 09:56:52 +01:00
Scott Feldman e7118e5bda add comboat_fw tag for elecrow W5 boards with Combo-AT Wifi firmware 2025-02-21 07:22:17 +01:00
Ron Evans 150d9d1c6b fix: correctly handle id lookup for finalizeRef call
Modify the ID used for looking up the reference, based on suggestion made by @prochac

Also use console.error in the caase that the reference is not found, since it is now actually
known to be an error.
2025-02-20 22:17:38 +01:00
Laurent Demailly 8fe039156b fix: Avoid total failure on wasm finalizer call 2025-02-20 22:17:38 +01:00
deadprogram 190c20825f targets: turn on GC for TKey1 device, since it does in fact work
Signed-off-by: deadprogram <ron@hybridgroup.com>
2025-02-14 12:49:20 +01:00
HattoriHanzo031 d55a89f96a board: support for NRF51 HW-651 (#4712)
NRF51: Support for NRF51 HW-651 board
* smoketest
* removed redundant flash-method
* smoketest fix
* description and links
* link fix
2025-01-30 05:46:52 +01:00
Elias Naur 080a6648e9 targets: match Pico2 stack size to Pico
Took me a while to debug weird crashes after switching from Pico to
Pico2.
2025-01-26 17:04:04 +08:00
vaaski 4f39be9c3b targets: esp32c3-supermini (#4518) 2025-01-20 21:44:58 +01:00
Scott Feldman 7305a44f0c targets: add support for Elecrow Pico rp2350 W5 boards (#4706)
https://www.elecrow.com/pico-w5-microcontroller-development-boards-rp2350-microcontroller-board.html

Just the basics to get several test to work (blinky1, flash).

This board has an rtl8720d Wifi/bluetooth chip wired to UART1, but the
rtl8720d firmware installed is the AT cmd set, not the RPC interface
used by the rtl8720dn driver, so no wifi support at the moment.

---------

Co-authored-by: Yurii Soldak <ysoldak@gmail.com>
2025-01-20 15:36:03 +01:00
Scott Feldman 74effd2fa9 targets: add support for Elecrow Pico rp2040 W5 boards (#4705)
https://www.elecrow.com/pico-w5-microcontroller-development-boards-rp2040-microcontroller-board-support-wifi-2-4ghz-5ghz-bluetooth5.html

Just the basics to get several test to work (blinky1, flash).

This board has an rtl8720d Wifi/bluetooth chip wired to UART1, but the
rtl8720d firmware installed is the AT cmd set, not the RPC interface
used by the rtl8720dn driver, so no wifi support at the moment.
2025-01-20 13:48:51 +01:00
Ayke van Laethem 9e9768b51d all: add support for LLVM 19 2025-01-20 06:15:33 +01:00
Volodymyr Pobochii b15adf23f8 machine: add support for waveshare-rp2040-tiny (#4683) 2025-01-14 01:53:40 +01:00
deadprogram c4cfc01ba3 targets: add support for Pimoroni Tiny2350 board
Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-12-19 10:12:57 +01:00
Patricio Whittingslow 37f35f8c91 Add RP2350 support (#4459)
machine/rp2350: add support

* add linker scripts for rp2350
* add bootloader
* begin melding rp2040 and rp2350 APIs
* add UART
* add rp2350 boot patching
* Fix RP2350 memory layout (#4626)
* Remove rp2040-style second stage bootloader.
* Add 'minimum viable' IMAGE_DEF embedded block
* Create a pico2 specific target
* Implement rp2350 init, clock, and uart support
* Merge rp2 reset code back together
* Separate chip-specific clock definitions
* Clear pad isolation bit on rp2350
* Init UART in rp2350 runtime
* Correct usb/serial initialization order
* Implement jump-to-bootloader
* test: add pico2 to smoketests

---------

Signed-off-by: deadprogram <ron@hybridgroup.com>
Co-authored-by: Matthew Mets <matt.mets@cibomahto.com>
Co-authored-by: Matt Mets <matt@blinkinlabs.com>
Co-authored-by: deadprogram <ron@hybridgroup.com>
2024-12-18 19:36:30 +01:00
Ron Evans 17302ca762 targets: add implementation for Tillitis TKey device (#4631)
* initial implementation for Tillitis TKey device
* add UART implementation for TKey
* add Pin interface implementation for TKey touch sensor
* add RNG interface implementation for TKey
* add helpful machine package functions to return identifiers such as name and version for TKey
* use built-in timer for sleep timing on TKey
* modify UART implementation for TKey to implement Serialer interface
* implement BLAKE2s ROM function call for TKey device
* handle abort by triggering TKey device fault using illegal instruction to halt CPU
* simplify TKey implementation by inheriting from existing riscv32 target
* return error for trying to configure invalid baudrates on UART
* add tkey to builder test
* be very specific for features passed to LLVM for specific config in use for TKey
* handle feedback items from TKey device code review

Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-12-14 14:26:03 +01:00
Ayke van Laethem 258dac2324 wasm: tidy up wasm_exec.js a bit 2024-11-14 11:02:54 -08:00
Damian Gryski 91563cff1f targets/wasm_exec: call process.exit() when go.run() returns 2024-11-14 09:16:25 +01:00
Ayke van Laethem ceb7891986 wasm: correctly return from run() in wasm_exec.js
Instead of hanging forever, it should return the exit code from os.Exit.
2024-11-08 11:55:38 +01:00
Randy Reddig 0edeaf657f tinygo: revise and simplify wasmtime argument handling (#4555) 2024-10-28 17:57:24 +01:00
Ayke van Laethem 0f95b4102d wasm: use precise GC for WebAssembly (including WASI)
With a few small modifications, all the problems with `-gc=precise` in
WebAssembly seem to have been fixed.

I didn't do any performance measurements, but this is supposed to
improve GC performance.
2024-10-23 09:13:30 +01:00
Ayke van Laethem e615c25319 targets: add WaveShare ESP-C3-32S-Kit
I've had this board for a while now, but never added proper TinyGo
support. So here is a PR to do just that.
2024-10-22 11:21:48 +01:00
Ayke van Laethem 4ef5109a07 wasm: add //go:wasmexport support to js/wasm
This adds support for //go:wasmexport with `-target=wasm` (in the
browser). This follows the //go:wasmexport proposal, meaning that
blocking functions are not allowed.

Both `-buildmode=default` and `-buildmode=c-shared` are supported. The
latter allows calling exported functions after `go.run()` has returned.
2024-10-18 10:07:21 +01:00
deadprogram 62c1555aa8 targets: add bulk memory flags to wasm-unknown target since basically every runtime has it now
Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-10-09 08:18:58 +01:00
Randy Reddig 453a1d35c3 compiler, runtime: enable go:wasmexport for wasip2 (#4499)
* compiler: prefer go:wasmexport over go:export

* runtime, targets/wasip2: enable -buildmode=c-shared for wasip2

* runtime: rename import from wasi_run to wasiclirun (PR feedback)
2024-10-04 17:36:47 -07:00
Ayke 9da8b5c786 wasm: add //go:wasmexport support (#4451)
This adds support for the `//go:wasmexport` pragma as proposed here:
https://github.com/golang/go/issues/65199

It is currently implemented only for wasip1 and wasm-unknown, but it is
certainly possible to extend it to other targets like GOOS=js and
wasip2.
2024-10-04 15:33:47 -07:00
Randy Reddig d4729f92bd targets/wasip2: add wasmtime -S args to support network interfaces 2024-09-17 11:24:13 +02:00
Ayke van Laethem c931bc7394 wasip2: do not export the _start function
It seems to have been replaced with the Component Model `run` function.
2024-09-06 08:54:20 +02:00
Warren Guy 1f3e0004a9 add board: RAKwireless RAK4631 (#4454)
targets: add rak4631
2024-09-05 11:49:36 +02:00
deadprogram 16950780d3 targets: remove import-memory flag from wasm-unknown target to fix #4319
Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-08-17 18:16:39 +02:00
Kobayashi Shunta 841abb0903 feat: add node: specifier 2024-08-09 20:30:58 +02:00
Damian Gryski 9cb263479c wasi preview 2 support (#4027)
* all: wasip2 support

Co-authored-by: Randy Reddig <randy.reddig@fastly.com>
2024-07-02 07:02:03 -07:00
deadprogram 880e940417 targets: add cyw43439 tag to badger2040-w and also add new pico-w target for wireless support
Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-06-11 07:57:58 +02:00
Ayke van Laethem 81ce7fb738 LLVM 18 support 2024-05-24 19:12:26 +02:00
deadprogram ee3a05f1de targets: add support for Badger2040 W
Signed-off-by: deadprogram <ron@hybridgroup.com>
2024-05-13 20:10:36 +02:00
Johann Freymuth 1d9f26cee1 targets: add support for m5paper 2024-05-12 16:09:27 +02:00
Elias Naur 2b3b870bfe mksnanov3: limit programming speed to 1800 kHz
Both of my development boards exhibit stability problems when
programming at the default 4000 kHz speed of the target/stmf32d4x
OpenOCD configuration.

Note that the speed limit must be set by an event handler, because it
is hard-coded by a similar event handler in stmf32f4x.cfg:

  $_TARGETNAME configure -event reset-init {
  	# Configure PLL to boost clock to HSI x 4 (64 MHz)
    ...

  	# Boost JTAG frequency
  	adapter speed 8000     <-- resolves to 4000 kHz by the SWD interface
  }

While here, replace the reference to the deprecated "stlink-v2"
configuration.
2024-04-27 13:02:20 +02:00
Patrick Ting 22bf045c9a add stm32 nucleol476rg support 2024-04-19 20:50:00 +02:00
Randy Reddig cfcc894855 targets: add wasi.json that inherits wasip1.json
PR feedback
2024-03-27 16:01:40 +01:00