targets/gba: implement interrupt handler

targets/gameboy-advance.ld

@@ -1,10 +1,13 @@
 OUTPUT_ARCH(arm)
 ENTRY(_start)
 
+/* Note: iwram is reduced by 96 bytes because the last part of that RAM
+ * (starting at 0x03007FA0) is used for interrupt handling.
+ */
 MEMORY {
-    ewram   : ORIGIN = 0x02000000, LENGTH = 256K /* on-board work RAM (2 wait states) */
-    iwram   : ORIGIN = 0x03000000, LENGTH = 32K  /* in-chip work RAM (faster) */
-    rom     : ORIGIN = 0x08000000, LENGTH = 32M  /* flash ROM */
+    ewram   : ORIGIN = 0x02000000, LENGTH = 256K   /* on-board work RAM (2 wait states) */
+    iwram   : ORIGIN = 0x03000000, LENGTH = 32K-96 /* in-chip work RAM (faster) */
+    rom     : ORIGIN = 0x08000000, LENGTH = 32M    /* flash ROM */
 }
 
 __stack_size_irq = 1K;

targets/gameboy-advance.s

@@ -17,9 +17,7 @@ _start:
     .byte   0x00,0x00              // Checksum (80000BEh)
 
 start_vector:
-    mov     r0, #0x4000000                 // REG_BASE
-    str     r0, [r0, #0x208]
-
+    // Configure stacks
     mov     r0, #0x12                      // Switch to IRQ Mode
     msr     cpsr, r0
     ldr     sp, =__sp_irq                  // Set IRQ stack
@@ -27,7 +25,21 @@ start_vector:
     msr     cpsr, r0
     ldr     sp, =__sp_usr                  // Set user stack
 
+    // Configure interrupt handler
+    mov     r0, #0x4000000                 // REG_BASE
+    ldr     r1, =handleInterruptARM
+    str     r1, [r0, #-4]                  // actually storing to 0x03007FFC due to mirroring
+
+    // Enable interrupts
+    mov     r1, #1
+    str     r1, [r0, #0x208]               // 0x04000208 Interrupt Master Enable
+
     // Jump to user code (switching to Thumb mode)
     ldr     r3, =main
     bx      r3
 
+// Small interrupt handler that immediately jumps to a function defined in the
+// program (in Thumb) for further processing.
+handleInterruptARM:
+    ldr     r0, =handleInterrupt
+    bx      r0