mirror of
https://github.com/tinygo-org/drivers.git
synced 2026-08-14 03:43:42 +00:00
Ayke van Laethem
4ff437e5d4
This commit adds support for the nrf52, which is a Cortex-M4 running at 64MHz. While implementing this, I discovered that the timings for AVR/16MHz and Cortex-M0 at 16MHz weren't quite right. They do work, but were slightly out of spec. So I fixed this as well.
50 lines
1.5 KiB
Go
50 lines
1.5 KiB
Go
// +build arduino
|
|
|
|
package ws2812
|
|
|
|
// This file implements the WS2812 protocol for 16MHz AVR microcontrollers.
|
|
|
|
import (
|
|
"device/avr"
|
|
)
|
|
|
|
// Send a single byte using the WS2812 protocol.
|
|
func (d Device) WriteByte(c byte) error {
|
|
// For the AVR at 16MHz
|
|
portSet, maskSet := d.Pin.PortMaskSet()
|
|
portClear, maskClear := d.Pin.PortMaskClear()
|
|
|
|
// See:
|
|
// https://wp.josh.com/2014/05/13/ws2812-neopixels-are-not-so-finicky-once-you-get-to-know-them/
|
|
// T0H: 4 cycles or 250ns
|
|
// T0L: 14 cycles or 875ns -> together 18 cycles or 1125ns
|
|
// T1H: 9 cycles or 562ns
|
|
// T1L: 8 cycles or 500ns -> together 17 cycles or 1062ns
|
|
avr.AsmFull(`
|
|
send_bit:
|
|
st {portSet}, {maskSet} ; [2] set output high
|
|
lsl {value} ; [1] shift off the next bit, store it in C
|
|
brcs skip_store ; [1/2] branch if this bit is high (long pulse)
|
|
st {portClear}, {maskClear} ; [2] set output low (short pulse)
|
|
skip_store:
|
|
nop ; [4] wait before changing the output again
|
|
nop
|
|
nop
|
|
nop
|
|
st {portClear}, {maskClear} ; [2] set output low (end of pulse)
|
|
nop ; [3]
|
|
nop
|
|
nop
|
|
subi {i}, 1 ; [1] subtract one (for the loop)
|
|
brne send_bit ; [1/2] send the next bit, if not at the end of the loop
|
|
`, map[string]interface{}{
|
|
"value": c,
|
|
"i": 8,
|
|
"maskSet": maskSet,
|
|
"portSet": portSet,
|
|
"maskClear": maskClear,
|
|
"portClear": portClear,
|
|
})
|
|
return nil
|
|
}
|