mirror of
https://github.com/tinygo-org/drivers.git
synced 2026-08-05 07:27:49 +00:00
deadprogram
265 lines
9.6 KiB
Markdown
265 lines
9.6 KiB
Markdown
0.15.0
|
|
---
|
|
- **new devices**
|
|
- dht: add DHTXX thermometer
|
|
- mcp23017: new driver for MCP23017 (I2C port expander)
|
|
- bmp388: Add bmp388 support (#219)
|
|
- **enhancements**
|
|
- hd44780: add a mode to work with boards where the RW pin is grounded
|
|
- st7789: add scrolling functions to match st7735
|
|
- microbitmatrix: matrix now working on microbit v2
|
|
- ds1307: Better interface "ReadTime" instead of "Time"
|
|
- ws2812: make AVR support more robust
|
|
- **bugfixes**
|
|
- all: fix main package in examples
|
|
- **core**
|
|
- adc: update all drivers with ADC to use new config struct
|
|
- spi: remove machine.SPI and replace with drivers.SPI interface for almost all SPI drivers
|
|
- **testing**
|
|
- test: run unit tests against i2c drivers and any spi drivers without direct gpio
|
|
- **docs**
|
|
- st7789: correct errors on various godoc comments
|
|
|
|
0.14.0
|
|
---
|
|
- **new devices**
|
|
- lis2mdl: add LIS2MDL magnetometer (#187)
|
|
- waveshare: add Waveshare 4.2in B/W e-paper driver (#183)
|
|
- **enhancements**
|
|
- adt7410: add connection test and for that matter connection method
|
|
- gps
|
|
- add speed and heading to fix, as parsed from RMC NMEA sentence
|
|
- improvements and bugfixes (#186)
|
|
- ili9341
|
|
- add support for setting framerate, vsync pause, and reading scanline data.
|
|
- renamed NewSpi() to NewSPI() in accordance with Go naming conventions
|
|
- ws2812
|
|
- add support for ESP8266
|
|
- add support for ESP32
|
|
- **bugfixes**
|
|
- ili9341
|
|
- rix setWindow bug, add CS pin for Clue compatibility. (#180)
|
|
- bugfix for RAMWR bug
|
|
- lis2mdl: turn on read mode on every read, to ensure that magnetometer data is updated
|
|
- **core**
|
|
- i2c
|
|
- switch all i2c drivers definitions to use i2c bus interface type instead of machine package concrete type
|
|
- correct interface definition for I2C Tx function
|
|
- **testing**
|
|
- fix smoke-test unless avr-gcc installed
|
|
- add very basic mock structs for testing i2c devices, based on work done by @rogpeppe
|
|
- improve API surface and implement one more test function in lis2mdl driver
|
|
- **docs**
|
|
- replace README badge for godocs with pkgdocs
|
|
|
|
0.13.0
|
|
---
|
|
- **new devices**
|
|
- bmi160: add initial support
|
|
- bmp280: added support for the Bosch BMP280 temperature and pressure sensor. (#158)
|
|
- lsm303agr: add lsm303agr (#162)
|
|
- ssd1351: add SSD1351 OLED display driver (#146)
|
|
- **enhancements**
|
|
- hd44780: add Hd44780i2c driver (#173)
|
|
- ili9341
|
|
- add ILI9341 TFT driver (SPI) for ATSAMD2x (#174)
|
|
- cache address window to prevent sending unnecessary commands (#171)
|
|
- ILI9341 TFT driver (SPI) (#153)
|
|
- improve performance of ILI9341 on ATSAMD5X
|
|
- ST77xx: fix DrawFastHLine for ST77xx, SSD1331 and SSD1351 DrawFastHLine uses FillRectangle(x,y,width,height,c), so height must be 1 to draw a horizontal line
|
|
- tmp102: add Connected func to check for device
|
|
- wifinina: added UDP support
|
|
- ws2812: update ws2812_avr_16m.go
|
|
- **bugfixes**
|
|
- apa102: avoid creating garbage
|
|
- bmp180: fix temperature type conversion
|
|
- **core**
|
|
- all
|
|
- added custom import path (#161)
|
|
- changeover to eliminate all direct use of master/slave terminology
|
|
- build: try vendor in working directory to match expected module path
|
|
- ci: support Go modules
|
|
- modules: update go version and dependency
|
|
- **docs**
|
|
- docs: reorder to correct alpha and adjust count of supported drivers
|
|
|
|
0.12.0
|
|
---
|
|
- **new devices**
|
|
- hcsr04: Added HC-SR04 ultrasonic distance sensor. (#143)
|
|
- spi/qspi: Low-level IO driver for serial flash memory via SPI and QSPI (#124)
|
|
- tmp102: TMP102 low-power digital temperature sensor (#141)
|
|
- amg88xx: AMG88xx thermal camera module
|
|
- **bugfixes**
|
|
- mqtt: reduce use of goroutines in router to not start a new goroutine for each invocation of each callback
|
|
|
|
0.11.0
|
|
---
|
|
- **new devices**
|
|
- shiftregister: Support for various shift register chips (#135)
|
|
- **enhancements**
|
|
- shifter: simplify API surface for PyBadge (#137)
|
|
- shifter: new API for shifter driver
|
|
- mqtt: use buffered channels for incoming messages to handle bursts
|
|
- ili9341: Adding scroll functionality (#121)
|
|
- **bugfixes**
|
|
- wifinina: fix typo on StartScanNetworks
|
|
- ili9341: various bugfixes for display
|
|
- **examples**
|
|
- semihosting: add example
|
|
- **docs**
|
|
- readme: Use degree sign instead of ordinal
|
|
- all: fix celsius symbol in all code comments
|
|
|
|
0.10.0
|
|
---
|
|
- **new devices**
|
|
- adt7410: Support for ADT7410 temperature sensor (#109)
|
|
- ili9341: ILI9341 TFT driver (#115)
|
|
- l293x: added support for h-bridge motor controller
|
|
- l9110x: add support for L9110x h-bridge motor driver
|
|
- resistive: Adding driver for four-wire resistive touchscreen (#118)
|
|
- **enhancements**
|
|
- st7735: added scroll functionality to st7735
|
|
- st7735: remove default offsets
|
|
- st7789: remove default offsets
|
|
- ws2812: Added nrf52840 tag to ws2812
|
|
- ws2812: work-arounds to allow Digispark to control WS2812 LEDs
|
|
- **docs**
|
|
- readme: update README to include list of all 44 drivers
|
|
- wifinina: update docs and add Dockerfile to build firmware
|
|
- wifinina: update docs and info on how to install WiFiNINA driver
|
|
|
|
0.9.0
|
|
---
|
|
- **new devices**
|
|
- net: shared implementation of net package for serial wifi devices
|
|
- shifter: add support for bit Parallel In Serial Out (PISO) shifter
|
|
- stepper: add support for dual stepper motor
|
|
- wifinina: add implementation for WiFiNINA firmware
|
|
- **enhancements**
|
|
- st7735: improvements in st7735 driver
|
|
- st7789: improvements in st7789 driver
|
|
- ws2812: add support for 120Mhz Cortex-M4
|
|
- ws2812: added Feather M0 and Trinket M0 to build tags for WS2812
|
|
- ws2812: add support for simulation
|
|
- **bugfixes**
|
|
- ws2812: fix "invalid symbol redefinition" error
|
|
- **examples**
|
|
- Add examples for wifinina drivers
|
|
|
|
0.8.0
|
|
---
|
|
- **new devices**
|
|
- mcp3008: add implementation for MCP3008 ADC with SPI interface
|
|
- semihosting: initial implementation of ARM semihosting
|
|
- **enhancements**
|
|
- espat: refactor response processing for greater speed and efficiency
|
|
- espat: implement mqtt subscribe functionality via blocking select/channels (experiemental)
|
|
- **bugfixes**
|
|
- st7789: fix index out of bounds error
|
|
- **examples**
|
|
- Add espat driver example for mqtt subscribe
|
|
|
|
0.7.0
|
|
---
|
|
- **new devices**
|
|
- veml6070: add Vishay UV light sensor
|
|
- **enhancements**
|
|
- lis3dh: example uses I2C1 so requires config to specify pins since they are not default
|
|
- ssd1331: make SPI TX faster
|
|
- st7735: make SPI Tx faster
|
|
- **docs**
|
|
- complete missing GoDocs for main and sub-packages
|
|
- **core**
|
|
- add Version string for support purposes
|
|
- **examples**
|
|
- Change all espat driver examples to use Arduino Nano33 IoT by default
|
|
|
|
0.6.0
|
|
---
|
|
- **new devices**
|
|
- Support software SPI for APA102 (Itsy Bitsy M0 on-board "Dotstar" LED as example)
|
|
|
|
0.5.0
|
|
---
|
|
- **new devices**
|
|
- LSM6DS3 accelerometer
|
|
- **bugfixes**
|
|
- ws2812: fix timings for the nrf51
|
|
- **enhancements**
|
|
- ws2812: Add build tag for Arduino Nano33 IoT
|
|
|
|
0.4.0
|
|
---
|
|
- **new devices**
|
|
- SSD1331 TFT color display
|
|
- ST7735 TFT color display
|
|
- ST7789 TFT color display
|
|
- **docs**
|
|
- espat
|
|
- complete list of dependencies for flashing NINA-W102 as used in Arduino Nano33 IoT board.
|
|
|
|
0.3.0
|
|
---
|
|
- **new devices**
|
|
- Buzzer for piezo or small speaker
|
|
- PDM MEMS microphone support using I2S interface
|
|
- **enhancements**
|
|
- epd2in13: added rotation
|
|
- espat
|
|
- add built-in support for MQTT publish using the Paho library packets, alongside some modifications needed for the AT protocol.
|
|
- add DialTLS and Dial methods, update MQTT example to allow both MQTT and MQTTS connections
|
|
- add example that uses MQTT publish to open server
|
|
- add README with information on how to flash ESP32 or ESP8266 with AT command set firmware.
|
|
- add ResolveUDPAddr and ResolveTCPAddr implementations using AT command for DNS lookup
|
|
- change Response() method to use a passed-in timeout value instead of fixed pauses.
|
|
- implement TCPConn using AT command set
|
|
- improve error handling for key TCP functions
|
|
- refactor net and tls interface compatible code into separate sub-packages
|
|
- update MQTT example for greater stability
|
|
- use only AT commands that work on both ESP8266 and ESP32
|
|
- add documentation on how to use Arduino Nano33 IoT built-in WiFi NINA-W102 chip.
|
|
- **bugfixes**
|
|
- core: Error strings should not be capitalized (unless beginning with proper nouns or acronyms) or end with punctuation, since they are usually printed following other context.
|
|
- docs: add note to current/future contributors to please start by opening a GH issue to avoid duplication of efforts
|
|
- examples: typo in package name of examples
|
|
- mpu6050: properly scale the outputs of the accel/gyro
|
|
|
|
0.2.0
|
|
---
|
|
- **new devices**
|
|
- AT24C32/64 2-wire serial EEPROM
|
|
- BME280 humidity/pressure sensor
|
|
- **bugfixes**
|
|
- ws2812: better support for nrf52832
|
|
|
|
0.1.0
|
|
---
|
|
- **first release**
|
|
- This is the first official release of the TinyGo drivers repo, matching TinyGo 0.6.0. The following devices are supported:
|
|
- ADXL345
|
|
- APA102
|
|
- BH1750
|
|
- BlinkM
|
|
- BMP180
|
|
- DS1307
|
|
- DS3231
|
|
- Easystepper
|
|
- ESP8266/ESP32
|
|
- GPS
|
|
- HUB75
|
|
- LIS3DH
|
|
- MAG3110
|
|
- microbit LED matrix
|
|
- MMA8653
|
|
- MPU6050
|
|
- PCD8544
|
|
- SHT3x
|
|
- SSD1306
|
|
- Thermistor
|
|
- VL53L1X
|
|
- Waveshare 2.13"
|
|
- Waveshare 2.13" (B & C)
|
|
- WS2812
|