all: updates for drivers release v0.32.0

Signed-off-by: deadprogram <ron@hybridgroup.com>

CHANGELOG.md

@@ -1,3 +1,30 @@
+0.32.0
+---
+- **enhancements**
+    - **bmp280**
+        - remove alloc on read sensor data
+    - **ws2812**
+        - add 200MHz support for the Cortex-M0/rp2040
+
+- **bugfixes**
+    - **ssd1306**
+        - remove time.Sleep from SSD1306 SPI transfer code
+    - **tmc2209**
+        - tmc2209 bug fixes (#755)
+
+- **docs**
+    - **contributing**
+        - add driver design pointer to CONTRIBUTING.md
+
+
+0.31.0
+---
+---
+- **enhancements**
+    - **spi**
+        - update all SPI usage to use either *machine.SPI or drivers.SPI
+
+
 0.30.0
 ---
 - **new devices**

CONTRIBUTING.md

@@ -8,6 +8,9 @@ We would like your help to make this project better, so we appreciate any contri
 
 We'd love to get your feedback on getting started with TinyGo. Run into any difficulty, confusion, or anything else? You are not alone. We want to know about your experience, so we can help the next people. Please open a Github issue with your questions, or you can also get in touch directly with us on our Slack channel at [https://gophers.slack.com/messages/CDJD3SUP6](https://gophers.slack.com/messages/CDJD3SUP6).
 
+### Driver design
+Before porting or writing a driver from scratch please read **[Driver Design for TinyGo](https://tinygo.org/docs/guides/driver-design)**.
+
 ### One of the TinyGo drivers is not working as you expect
 
 Please open a Github issue with your problem, and we will be happy to assist.

bmp280/bmp280.go

@@ -23,6 +23,7 @@ type Filter uint
 type Device struct {
 	bus         drivers.I2C
 	Address     uint16
+	buf         [6]byte
 	cali        calibrationCoefficients
 	Temperature Oversampling
 	Pressure    Oversampling
@@ -134,8 +135,8 @@ func (d *Device) PrintCali() {
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
 func (d *Device) ReadTemperature() (temperature int32, err error) {
-	data, err := d.readData(REG_TEMP, 3)
-	if err != nil {
+	data := d.buf[:3]
+	if err = d.readData(REG_TEMP, data); err != nil {
 		return
 	}
 
@@ -158,8 +159,8 @@ func (d *Device) ReadTemperature() (temperature int32, err error) {
 // ReadPressure returns the pressure in milli pascals (mPa).
 func (d *Device) ReadPressure() (pressure int32, err error) {
 	// First 3 bytes are Pressure, last 3 bytes are Temperature
-	data, err := d.readData(REG_PRES, 6)
-	if err != nil {
+	data := d.buf[:6]
+	if err = d.readData(REG_PRES, data); err != nil {
 		return
 	}
 
@@ -203,7 +204,7 @@ func (d *Device) ReadPressure() (pressure int32, err error) {
 }
 
 // readData reads n number of bytes of the specified register
-func (d *Device) readData(register int, n int) ([]byte, error) {
+func (d *Device) readData(register int, data []byte) error {
 	// If not in normal mode, set the mode to FORCED mode, to prevent incorrect measurements
 	// After the measurement in FORCED mode, the sensor will return to SLEEP mode
 	if d.Mode != MODE_NORMAL {
@@ -218,9 +219,7 @@ func (d *Device) readData(register int, n int) ([]byte, error) {
 	}
 
 	// Read the requested register
-	data := make([]byte, n)
-	err := legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
-	return data, err
+	return legacy.ReadRegister(d.bus, uint8(d.Address), uint8(register), data[:])
 }
 
 // convert3Bytes converts three bytes to int32

examples/flash/console/spi/main.go

@@ -10,7 +10,7 @@ import (
 func main() {
 	console_example.RunFor(
 		flash.NewSPI(
-			&machine.SPI1,
+			machine.SPI1,
 			machine.SPI1_SDO_PIN,
 			machine.SPI1_SDI_PIN,
 			machine.SPI1_SCK_PIN,

examples/sdcard/console/feather-m4.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/grandcentral-m4.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI1
+	spi = machine.SPI1
 	sckPin = machine.SDCARD_SCK_PIN
 	sdoPin = machine.SDCARD_SDO_PIN
 	sdiPin = machine.SDCARD_SDI_PIN

examples/sdcard/console/m0.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/p1am-100.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SDCARD_SPI
+	spi = machine.SDCARD_SPI
 	sckPin = machine.SDCARD_SCK_PIN
 	sdoPin = machine.SDCARD_SDO_PIN
 	sdiPin = machine.SDCARD_SDI_PIN

examples/sdcard/console/pygamer.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/pyportal.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI0
+	spi = machine.SPI0
 	sckPin = machine.SPI0_SCK_PIN
 	sdoPin = machine.SPI0_SDO_PIN
 	sdiPin = machine.SPI0_SDI_PIN

examples/sdcard/console/wioterminal.go

@@ -7,7 +7,7 @@ import (
 )
 
 func init() {
-	spi = &machine.SPI2
+	spi = machine.SPI2
 	sckPin = machine.SCK2
 	sdoPin = machine.SDO2
 	sdiPin = machine.SDI2

examples/tmc5160/main.go

@@ -27,7 +27,7 @@ func main() {
 	//bind csPin to driverAdddress
 	driverAddress := uint8(0) // Let's assume we are working with driver at address 0x01
 	// Step 3. Bind the communication interface to the protocol
-	comm := tmc5160.NewSPIComm(*spi, csPins)
+	comm := tmc5160.NewSPIComm(spi, csPins)
 	// Step 4. Define your stepper like this below
 	//stepper := tmc5160.NewStepper(angle , gearRatio  vSupply  rCoil , lCoil , iPeak , rSense , mSteps, fclk )
 	stepper := tmc5160.NewDefaultStepper() // Default Stepper should be used only for testing.

ili9341/spi_atsamd21.go

@@ -8,10 +8,10 @@ import (
 )
 
 type spiDriver struct {
-	bus machine.SPI
+	bus *machine.SPI
 }
 
-func NewSPI(bus machine.SPI, dc, cs, rst machine.Pin) *Device {
+func NewSPI(bus *machine.SPI, dc, cs, rst machine.Pin) *Device {
 	return &Device{
 		dc:  dc,
 		cs:  cs,

ili9341/spi_atsamd51.go

@@ -8,10 +8,10 @@ import (
 )
 
 type spiDriver struct {
-	bus machine.SPI
+	bus *machine.SPI
 }
 
-func NewSPI(bus machine.SPI, dc, cs, rst machine.Pin) *Device {
+func NewSPI(bus *machine.SPI, dc, cs, rst machine.Pin) *Device {
 	return &Device{
 		dc:  dc,
 		cs:  cs,

max6675/max6675.go

@@ -4,6 +4,8 @@ package max6675
 import (
 	"errors"
 	"machine"
+
+	"tinygo.org/x/drivers"
 )
 
 // ErrThermocoupleOpen is returned when the thermocouple input is open.
@@ -11,14 +13,14 @@ import (
 var ErrThermocoupleOpen = errors.New("thermocouple input open")
 
 type Device struct {
-	bus machine.SPI
+	bus drivers.SPI
 	cs  machine.Pin
 }
 
 // Create a new Device to read from a MAX6675 thermocouple.
 // Pins must be configured before use.  Frequency for SPI
 // should be 4.3MHz maximum.
-func NewDevice(bus machine.SPI, cs machine.Pin) *Device {
+func NewDevice(bus drivers.SPI, cs machine.Pin) *Device {
 	return &Device{
 		bus: bus,
 		cs:  cs,

max72xx/max72xx.go

@@ -4,17 +4,19 @@ package max72xx
 
 import (
 	"machine"
+
+	"tinygo.org/x/drivers"
 )
 
 type Device struct {
-	bus machine.SPI
+	bus drivers.SPI
 	cs  machine.Pin
 }
 
 // NewDriver creates a new max7219 connection. The SPI wire must already be configured
 // The SPI frequency must not be higher than 10MHz.
 // parameter cs: the datasheet also refers to this pin as "load" pin.
-func NewDevice(bus machine.SPI, cs machine.Pin) *Device {
+func NewDevice(bus drivers.SPI, cs machine.Pin) *Device {
 	return &Device{
 		bus: bus,
 		cs:  cs,

p1am/p1am.go

@@ -14,7 +14,8 @@ import (
 )
 
 type P1AM struct {
-	bus                                        machine.SPI
+	bus *machine.SPI
+
 	slaveSelectPin, slaveAckPin, baseEnablePin machine.Pin
 
 	// SkipAutoConfig will skip loading a default configuration into each module.

ssd1306/ssd1306.go

@@ -322,7 +322,6 @@ func (b *SPIBus) tx(data []byte, isCommand bool) error {
 
 	if isCommand {
 		b.csPin.High()
-		time.Sleep(1 * time.Millisecond)
 		b.dcPin.Low()
 		b.csPin.Low()
 
@@ -330,7 +329,6 @@ func (b *SPIBus) tx(data []byte, isCommand bool) error {
 		b.csPin.High()
 	} else {
 		b.csPin.High()
-		time.Sleep(1 * time.Millisecond)
 		b.dcPin.High()
 		b.csPin.Low()
 

sx127x/sx127x.go

@@ -43,7 +43,7 @@ func (d *Device) GetRadioEventChan() chan lora.RadioEvent {
 }
 
 // New creates a new SX127x connection. The SPI bus must already be configured.
-func New(spi machine.SPI, rstPin machine.Pin) *Device {
+func New(spi drivers.SPI, rstPin machine.Pin) *Device {
 	k := Device{
 		spi:            spi,
 		rstPin:         rstPin,

tmc2209/uartcomm.go

@@ -57,14 +57,10 @@ func (comm *UARTComm) WriteRegister(register uint8, value uint32, driverIndex ui
 		byte((value >> 16) & 0xFF), // Middle byte
 		byte((value >> 8) & 0xFF),  // Next byte
 		byte(value & 0xFF),         // LSB of value
+		0,                          // CRC
 	}
 
-	// Calculate checksum by XORing all bytes
-	checksum := byte(0)
-	for _, b := range buffer[:7] {
-		checksum ^= b
-	}
-	buffer[7] = checksum // Set checksum byte
+	buffer[7] = CalculateCRC(buffer[:7])
 
 	// Write the data to the TMC2209
 	done := make(chan error, 1)
@@ -86,10 +82,10 @@ func (comm *UARTComm) WriteRegister(register uint8, value uint32, driverIndex ui
 // ReadRegister sends a register read command to the TMC2209 with a timeout.
 func (comm *UARTComm) ReadRegister(register uint8, driverIndex uint8) (uint32, error) {
 	var writeBuffer [4]byte
-	writeBuffer[0] = 0x05                                             // Sync byte
-	writeBuffer[1] = 0x00                                             // Slave address
-	writeBuffer[2] = register & 0x7F                                  // Read command (MSB clear for read)
-	writeBuffer[3] = writeBuffer[0] ^ writeBuffer[1] ^ writeBuffer[2] // Checksum
+	writeBuffer[0] = 0x05            // Sync byte
+	writeBuffer[1] = 0x00            // Slave address
+	writeBuffer[2] = register & 0x7F // Read command (MSB clear for read)
+	writeBuffer[3] = CalculateCRC(writeBuffer[:3])
 
 	// Send the read command
 	done := make(chan []byte, 1)
@@ -103,11 +99,7 @@ func (comm *UARTComm) ReadRegister(register uint8, driverIndex uint8) (uint32, e
 	// Implementing timeout using a 100ms timer
 	select {
 	case readBuffer := <-done:
-		// Validate checksum
-		checksum := byte(0)
-		for i := 0; i < 7; i++ {
-			checksum ^= readBuffer[i]
-		}
+		checksum := CalculateCRC(readBuffer[:7])
 		if checksum != readBuffer[7] {
 			return 0, CustomError("checksum error")
 		}

tmc5160/README.MD

@@ -183,7 +183,7 @@ if err != nil {
 
 ## API Reference
 
-    NewSPIComm(spi machine.SPI, csPins map[uint8]machine.Pin) *SPIComm
+    NewSPIComm(spi *machine.SPI, csPins map[uint8]machine.Pin) *SPIComm
 
 Creates a new SPI communication interface for the TMC5160.
 

tmc5160/spicomm.go

@@ -16,12 +16,12 @@ func (e CustomError) Error() string {
 
 // SPIComm implements RegisterComm for SPI-based communication
 type SPIComm struct {
-	spi    machine.SPI
+	spi    *machine.SPI
 	CsPins map[uint8]machine.Pin // Map to store CS pin for each Driver by its address
 }
 
 // NewSPIComm creates a new SPIComm instance.
-func NewSPIComm(spi machine.SPI, csPins map[uint8]machine.Pin) *SPIComm {
+func NewSPIComm(spi *machine.SPI, csPins map[uint8]machine.Pin) *SPIComm {
 	return &SPIComm{
 		spi:    spi,
 		CsPins: csPins,
@@ -31,7 +31,7 @@ func NewSPIComm(spi machine.SPI, csPins map[uint8]machine.Pin) *SPIComm {
 // Setup initializes the SPI communication with the Driver and configures all CS pins.
 func (comm *SPIComm) Setup() error {
 	// Check if SPI is initialized
-	if comm.spi == (machine.SPI{}) {
+	if comm.spi == nil {
 		return CustomError("SPI not initialized")
 	}
 
@@ -66,7 +66,7 @@ func (comm *SPIComm) WriteRegister(register uint8, value uint32, driverAddress u
 	addressWithWriteAccess := register | 0x80
 
 	// Send the address and the data to write (split into 4 bytes)
-	_, err := spiTransfer40(&comm.spi, addressWithWriteAccess, value)
+	_, err := spiTransfer40(comm.spi, addressWithWriteAccess, value)
 	if err != nil {
 		csPin.High()
 		return CustomError("Failed to write register")
@@ -88,7 +88,7 @@ func (comm *SPIComm) ReadRegister(register uint8, driverAddress uint8) (uint32,
 	csPin.Low()
 
 	// Step 1: Send a dummy write operation to begin the read sequence
-	_, err := spiTransfer40(&comm.spi, register, 0x00) // Send dummy data
+	_, err := spiTransfer40(comm.spi, register, 0x00) // Send dummy data
 	if err != nil {
 		csPin.High()
 		return 0, CustomError("Failed to send dummy write")
@@ -97,7 +97,7 @@ func (comm *SPIComm) ReadRegister(register uint8, driverAddress uint8) (uint32,
 	time.Sleep(176 * time.Nanosecond)
 	csPin.Low()
 	// Step 2: Send the register read request again to get the actual value
-	response, err := spiTransfer40(&comm.spi, register, 0x00) // Send again to get actual register data
+	response, err := spiTransfer40(comm.spi, register, 0x00) // Send again to get actual register data
 	if err != nil {
 		csPin.High()
 		return 0, CustomError("Failed to read register")

version.go

@@ -2,4 +2,4 @@ package drivers
 
 // Version returns a user-readable string showing the version of the drivers package for support purposes.
 // Update this value before release of new version of software.
-const Version = "0.30.0"
+const Version = "0.32.0"

waveshare-epd/epd1in54/epd1in54.go

@@ -22,7 +22,7 @@ type Config struct {
 }
 
 type Device struct {
-	bus  machine.SPI
+	bus  *machine.SPI
 	cs   machine.Pin
 	dc   machine.Pin
 	rst  machine.Pin
@@ -79,7 +79,7 @@ var partialRefresh = [159]uint8{
 }
 
 // New returns a new epd1in54 driver. Pass in a fully configured SPI bus.
-func New(bus machine.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
+func New(bus *machine.SPI, csPin, dcPin, rstPin, busyPin machine.Pin) Device {
 	return Device{
 		buffer: make([]uint8, (uint32(Width)*uint32(Height))/8),
 		bus:    bus,

ws2812/ws2812-asm_cortexm.go

@@ -1320,6 +1320,465 @@ void ws2812_writeByte168(char c, uint32_t *portSet, uint32_t *portClear, uint32_
 	  [maskClear]"r"(maskClear),
 	  [portClear]"m"(*portClear));
 }
+
+__attribute__((always_inline))
+void ws2812_writeByte200(char c, uint32_t *portSet, uint32_t *portClear, uint32_t maskSet, uint32_t maskClear) {
+	// Timings:
+	// T0H: 70 - 72 cycles or 350.0ns - 360.0ns
+	// T1H: 210 - 212 cycles or 1050.0ns - 1060.0ns
+	// TLD: 230 -    cycles or 1150.0ns -
+	uint32_t value = (uint32_t)c << 24;
+	char i = 8;
+	__asm__ __volatile__(
+		"1: @ send_bit\n"
+		"\t  str   %[maskSet], %[portSet]     @ [2]   T0H and T0L start here\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  lsls  %[value], #1               @ [1]\n"
+		"\t  bcs.n 2f                         @ [1/3] skip_store\n"
+		"\t  str   %[maskClear], %[portClear] @ [2]   T0H -> T0L transition\n"
+		"\t2: @ skip_store\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  str   %[maskClear], %[portClear] @ [2]   T1H -> T1L transition\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  nop\n"
+		"\t  subs  %[i], #1                   @ [1]\n"
+		"\t  beq.n 3f                         @ [1/3] end\n"
+		"\t  b     1b                         @ [1/3] send_bit\n"
+		"\t3: @ end\n"
+	: [value]"+r"(value),
+	  [i]"+r"(i)
+	: [maskSet]"r"(maskSet),
+	  [portSet]"m"(*portSet),
+	  [maskClear]"r"(maskClear),
+	  [portClear]"m"(*portClear));
+}
 */
 import "C"
 
@@ -1382,3 +1841,13 @@ func (d Device) writeByte168(c byte) {
 
 	interrupt.Restore(mask)
 }
+
+func (d Device) writeByte200(c byte) {
+	portSet, maskSet := d.Pin.PortMaskSet()
+	portClear, maskClear := d.Pin.PortMaskClear()
+
+	mask := interrupt.Disable()
+	C.ws2812_writeByte200(C.char(c), (*C.uint32_t)(unsafe.Pointer(portSet)), (*C.uint32_t)(unsafe.Pointer(portClear)), C.uint32_t(maskSet), C.uint32_t(maskClear))
+
+	interrupt.Restore(mask)
+}

ws2812/ws2812.go

@@ -1,7 +1,7 @@
 // Package ws2812 implements a driver for WS2812 and SK6812 RGB LED strips.
 package ws2812 // import "tinygo.org/x/drivers/ws2812"
 
-//go:generate go run gen-ws2812.go -arch=cortexm 16 48 64 120 125 168
+//go:generate go run gen-ws2812.go -arch=cortexm 16 48 64 120 125 168 200
 //go:generate go run gen-ws2812.go -arch=tinygoriscv 160 320
 
 import (

ws2812/ws2812_cortexm.go

@@ -28,12 +28,15 @@ func (d Device) WriteByte(c byte) error {
 	case 120_000_000: // 120MHz
 		d.writeByte120(c)
 		return nil
-	case 125_000_000: // 125 MHz e.g. rp2040
+	case 125_000_000: // 125 MHz e.g. rp2040 originally
 		d.writeByte125(c)
 		return nil
 	case 168_000_000: // 168MHz, e.g. stm32f405
 		d.writeByte168(c)
 		return nil
+	case 200_000_000: // 200MHz, e.g. rp2040 starting with TinyGo v0.37
+		d.writeByte200(c)
+		return nil
 	default:
 		return errUnknownClockSpeed
 	}