Implement enough wrappers to start the WiFi task

Work in progress. Does not work yet.

Some notes:

  - This requires some changes to TinyGo, look at the espnet branch.
  - The  next step is probably defining all the functions in
    g_wifi_osi_funcs (see espnet.c). Right now it hangs in
    esp_wifi_init_internal, probably a NULL pointer dereference.
  - This is only for the ESP32-C3. This will require some work to work
    on other chips from Espressif.

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "espnet/esp-idf"]
+	path = espnet/esp-idf
+	url = https://github.com/espressif/esp-idf.git

Makefile

@@ -214,6 +214,6 @@ NOTESTS = build examples flash semihosting pcd8544 shiftregister st7789 micropho
 TESTS = $(filter-out $(addsuffix /%,$(NOTESTS)),$(DRIVERS))
 
 unit-test:
-	@go test -v . $(addprefix ./,$(TESTS)) 
+	@go test -v $(addprefix ./,$(TESTS)) 
 
 test: clean fmt-check unit-test smoke-test

adt7410/adt7410.go

@@ -60,8 +60,19 @@ func (d *Device) Connected() bool {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (temperature int32, err error) {
-	return (drivers.Temperature(d.readUint16(RegTempValueMSB)) * 1000) / 128, nil
+	return (int32(d.readUint16(RegTempValueMSB)) * 1000) / 128, nil
+}
+
+// ReadTempC returns the value in the temperature value register, in Celsius.
+func (d *Device) ReadTempC() float32 {
+	t := d.readUint16(RegTempValueMSB)
+	return float32(int(t)) / 128.0
+}
+
+// ReadTempF returns the value in the temperature value register, in Fahrenheit.
+func (d *Device) ReadTempF() float32 {
+	return d.ReadTempC()*1.8 + 32.0
 }
 
 func (d *Device) writeByte(reg uint8, data byte) {

bme280/bme280.go

@@ -114,14 +114,14 @@ func (d *Device) Reset() {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (drivers.Temperature, error) {
+func (d *Device) ReadTemperature() (int32, error) {
 	data, err := d.readData()
 	if err != nil {
 		return 0, err
 	}
 
 	temp, _ := d.calculateTemp(data)
-	return drivers.Temperature(temp), nil
+	return temp, nil
 }
 
 // ReadPressure returns the pressure in milli pascals mPa

bmi160/bmi160.go

@@ -81,7 +81,7 @@ func (d *DeviceSPI) Reset() error {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
-func (d *DeviceSPI) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *DeviceSPI) ReadTemperature() (temperature int32, err error) {
 	data := d.buf[:3]
 	data[0] = 0x80 | reg_TEMPERATURE_0
 	data[1] = 0
@@ -109,7 +109,7 @@ func (d *DeviceSPI) ReadTemperature() (temperature drivers.Temperature, err erro
 	//    rawTemperature * 1000 * 64 / 0x8000 + 23000
 	//    rawTemperature * 64000 / 0x8000 + 23000
 	//    rawTemperature * 125 / 64 + 23000
-	temperature = drivers.Temperature(rawTemperature)*125/64 + 23000
+	temperature = int32(rawTemperature)*125/64 + 23000
 	return
 }
 

bmp180/bmp180.go

@@ -81,14 +81,14 @@ func (d *Device) Configure() {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
-func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (temperature int32, err error) {
 	rawTemp, err := d.rawTemp()
 	if err != nil {
 		return
 	}
 	b5 := d.calculateB5(rawTemp)
 	t := (b5 + 8) >> 4
-	return drivers.Temperature(100 * t), nil
+	return 100 * t, nil
 }
 
 // ReadPressure returns the pressure in milli pascals (mPa).

bmp280/bmp280.go

@@ -132,7 +132,7 @@ func (d *Device) PrintCali() {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000).
-func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (temperature int32, err error) {
 	data, err := d.readData(REG_TEMP, 3)
 	if err != nil {
 		return
@@ -150,7 +150,7 @@ func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error)
 
 	// Convert from degrees to milli degrees by multiplying by 10.
 	// Will output 30250 milli degrees celsius for 30.25 degrees celsius
-	temperature = drivers.Temperature(10 * ((tFine*5 + 128) >> 8))
+	temperature = 10 * ((tFine*5 + 128) >> 8)
 	return
 }
 

bmp388/bmp388.go

@@ -133,16 +133,16 @@ func (d *Device) tlinCompensate() (int64, error) {
 
 }
 
-// ReadTemperature returns the temperature in milli degrees Celsius, i.e 24260 / 1000 = 24.26°C.
+// ReadTemperature returns the temperature in centicelsius, i.e 2426 / 100 = 24.26 C
-func (d *Device) ReadTemperature() (drivers.Temperature, error) {
+func (d *Device) ReadTemperature() (int32, error) {
 
 	tlin, err := d.tlinCompensate()
 	if err != nil {
 		return 0, err
 	}
 
-	temp := (tlin * 125) / 8192
+	temp := (tlin * 25) / 16384
-	return drivers.Temperature(temp), nil
+	return int32(temp), nil
 }
 
 // ReadPressure returns the pressure in centipascals, i.e 10132520 / 100 = 101325.20 Pa

dht/constants.go

@@ -35,6 +35,18 @@ func (d DeviceType) extractData(buf []byte) (temp int16, hum uint16) {
 	return
 }
 
+// Celsius and Fahrenheit temperature scales
+type TemperatureScale uint8
+
+func (t TemperatureScale) convertToFloat(temp int16) float32 {
+	if t == C {
+		return float32(temp) / 10
+	} else {
+		// Fahrenheit
+		return float32(temp)*(9.0/50.) + 32.
+	}
+}
+
 // All functions return ErrorCode instance as error. This class can be used for more efficient error processing
 type ErrorCode uint8
 
@@ -45,6 +57,9 @@ const (
 	DHT11 DeviceType = iota
 	DHT22
 
+	C TemperatureScale = iota
+	F
+
 	ChecksumError ErrorCode = iota
 	NoSignalError
 	NoDataError

dht/thermometer.go

@@ -9,15 +9,14 @@ package dht // import "tinygo.org/x/drivers/dht"
 import (
 	"machine"
 	"time"
-
-	"tinygo.org/x/drivers"
 )
 
 // DummyDevice provides a basic interface for DHT devices.
 type DummyDevice interface {
 	ReadMeasurements() error
 	Measurements() (temperature int16, humidity uint16, err error)
-	Temperature() (drivers.Temperature, error)
+	Temperature() (int16, error)
+	TemperatureFloat(scale TemperatureScale) (float32, error)
 	Humidity() (uint16, error)
 	HumidityFloat() (float32, error)
 }
@@ -50,13 +49,23 @@ func (t *device) ReadMeasurements() error {
 	return err
 }
 
-// Getter for temperature. The temperature is returned in milli degrees Celsius.
+// Getter for temperature. Temperature method returns temperature as it is sent by device.
+// The temperature is measured temperature in Celsius multiplied by 10.
 // If no successful measurements for this device was performed, returns UninitializedDataError.
-func (t *device) Temperature() (drivers.Temperature, error) {
+func (t *device) Temperature() (int16, error) {
 	if !t.initialized {
 		return 0, UninitializedDataError
 	}
-	return drivers.Temperature(t.temperature) * 100, nil
+	return t.temperature, nil
+}
+
+// Getter for temperature. TemperatureFloat returns temperature in a given scale.
+// If no successful measurements for this device was performed, returns UninitializedDataError.
+func (t *device) TemperatureFloat(scale TemperatureScale) (float32, error) {
+	if !t.initialized {
+		return 0, UninitializedDataError
+	}
+	return scale.convertToFloat(t.temperature), nil
 }
 
 // Getter for humidity. Humidity returns humidity as it is sent by device.

dht/timesafethermometer.go

@@ -9,8 +9,6 @@ package dht // import "tinygo.org/x/drivers/dht"
 import (
 	"machine"
 	"time"
-
-	"tinygo.org/x/drivers"
 )
 
 // Device interface provides main functionality of the DHTXX sensors.
@@ -37,9 +35,10 @@ func (m *managedDevice) Measurements() (temperature int16, humidity uint16, err
 	return m.t.Measurements()
 }
 
-// Getter for temperature. The temperature is returned in milli degrees Celsius.
+// Getter for temperature. Temperature method returns temperature as it is sent by device.
+// The temperature is measured temperature in Celsius multiplied by 10.
 // Depending on the UpdatePolicy of the device may update cached measurements.
-func (m *managedDevice) Temperature() (temp drivers.Temperature, err error) {
+func (m *managedDevice) Temperature() (temp int16, err error) {
 	err = m.checkForUpdateOnDataRequest()
 	if err != nil {
 		return 0, err
@@ -65,6 +64,16 @@ func (m *managedDevice) checkForUpdateOnDataRequest() (err error) {
 	return err
 }
 
+// Getter for temperature. TemperatureFloat returns temperature in a given scale.
+// Depending on the UpdatePolicy of the device may update cached measurements.
+func (m *managedDevice) TemperatureFloat(scale TemperatureScale) (float32, error) {
+	err := m.checkForUpdateOnDataRequest()
+	if err != nil {
+		return 0, err
+	}
+	return m.t.TemperatureFloat(scale)
+}
+
 // Getter for humidity. Humidity returns humidity as it is sent by device.
 // The humidity is measured in percentages multiplied by 10.
 // Depending on the UpdatePolicy of the device may update cached measurements.

ds3231/ds3231.go

@@ -134,13 +134,13 @@ func (d *Device) ReadTime() (dt time.Time, err error) {
 }
 
 // ReadTemperature returns the temperature in millicelsius (mC)
-func (d *Device) ReadTemperature() (drivers.Temperature, error) {
+func (d *Device) ReadTemperature() (int32, error) {
 	data := make([]uint8, 2)
 	err := d.bus.ReadRegister(uint8(d.Address), REG_TEMP, data)
 	if err != nil {
 		return 0, err
 	}
-	return drivers.Temperature(int32(data[0])*1000 + int32((data[1]>>6)*25)*10), nil
+	return int32(data[0])*1000 + int32((data[1]>>6)*25)*10, nil
 }
 
 // uint8ToBCD converts a byte to BCD for the DS3231

espnet/ap.go

@@ -0,0 +1,49 @@
+package espnet
+
+/*
+#cgo CFLAGS: -DCONFIG_IDF_TARGET_ESP32C3
+#cgo CFLAGS: -Iinclude
+#cgo CFLAGS: -Iesp-idf/components/esp_common/include
+#cgo CFLAGS: -Iesp-idf/components/esp_event/include
+#cgo CFLAGS: -Iesp-idf/components/esp_netif/include
+#cgo CFLAGS: -Iesp-idf/components/esp_wifi/include
+
+#cgo LDFLAGS: -Lesp-idf/components/esp_wifi/lib/esp32c3 -lnet80211 -lpp -lphy -lmesh -lcore
+#cgo LDFLAGS: -Tesp-idf/components/esp_rom/esp32c3/ld/esp32c3.rom.ld
+
+#include "esp_private/wifi.h"
+#include "esp_wifi_types.h"
+#include "espnet.h"
+*/
+import "C"
+
+import _ "compat/freertos"
+
+type ESPWiFi struct {
+}
+
+var WiFi = &ESPWiFi{}
+
+type Config struct {
+}
+
+var internalConfig = C.wifi_init_config_t{
+	osi_funcs:           &C.g_wifi_osi_funcs,
+	wpa_crypto_funcs:    C.g_wifi_default_wpa_crypto_funcs,
+	static_rx_buf_num:   10,
+	static_tx_buf_num:   10,
+	mgmt_sbuf_num:       6,
+	sta_disconnected_pm: true,
+	magic:               C.WIFI_INIT_CONFIG_MAGIC,
+}
+
+func (wifi ESPWiFi) Configure(config Config) error {
+	C.esp_wifi_internal_set_log_level(5)
+	return makeError(C.esp_wifi_init_internal(&internalConfig))
+}
+
+func (wifi ESPWiFi) AccessPointMAC() ([6]byte, error) {
+	var mac [6]byte
+	errCode := C.esp_wifi_get_mac(C.ESP_IF_WIFI_AP, &mac[0])
+	return mac, makeError(errCode)
+}

espnet/error.go

@@ -0,0 +1,103 @@
+package espnet
+
+// #include <esp_err.h>
+// #include <esp_wifi.h>
+import "C"
+
+// Wrapper for C.esp_err_t. Don't convert a C.esp_err_t to an Error type,
+// instead use makeError to handle ESP_OK.
+type Error C.esp_err_t
+
+// makeError converts a C.esp_err_t into an error or nil depending on whether
+// errCode indicates an error or not.
+func makeError(errCode C.esp_err_t) error {
+	if errCode == C.ESP_OK {
+		return nil
+	}
+	return Error(errCode)
+}
+
+func (e Error) Error() string {
+	switch {
+	case e < C.ESP_ERR_WIFI_BASE:
+		// esp-idf/components/esp_common/include/esp_err.h
+		switch e {
+		case C.ESP_OK:
+			return "OK" // not an error
+		case C.ESP_FAIL:
+			return "ESP FAIL"
+		case C.ESP_ERR_NO_MEM:
+			return "Out of memory"
+		case C.ESP_ERR_INVALID_ARG:
+			return "Invalid argument"
+		case C.ESP_ERR_INVALID_STATE:
+			return "Invalid state"
+		case C.ESP_ERR_INVALID_SIZE:
+			return "Invalid size"
+		case C.ESP_ERR_NOT_FOUND:
+			return "Requested resource not found"
+		case C.ESP_ERR_NOT_SUPPORTED:
+			return "Operation or feature not supported"
+		case C.ESP_ERR_TIMEOUT:
+			return "Operation timed out"
+		case C.ESP_ERR_INVALID_RESPONSE:
+			return "Received response was invalid"
+		case C.ESP_ERR_INVALID_CRC:
+			return "CRC or checksum was invalid"
+		case C.ESP_ERR_INVALID_VERSION:
+			return "Version was invalid"
+		case C.ESP_ERR_INVALID_MAC:
+			return "MAC address was invalid"
+		default:
+			return "Unknown error"
+		}
+	case e >= C.ESP_ERR_WIFI_BASE && e < C.ESP_ERR_MESH_BASE:
+		// esp-idf/components/esp_wifi/include/esp_wifi.h
+		switch e {
+		case C.ESP_ERR_WIFI_NOT_INIT:
+			return "WiFi driver was not installed by esp_wifi_init"
+		case C.ESP_ERR_WIFI_NOT_STARTED:
+			return "WiFi driver was not started by esp_wifi_start"
+		case C.ESP_ERR_WIFI_NOT_STOPPED:
+			return "WiFi driver was not stopped by esp_wifi_stop"
+		case C.ESP_ERR_WIFI_IF:
+			return "WiFi interface error"
+		case C.ESP_ERR_WIFI_MODE:
+			return "WiFi mode error"
+		case C.ESP_ERR_WIFI_STATE:
+			return "WiFi internal state error"
+		case C.ESP_ERR_WIFI_CONN:
+			return "WiFi internal control block of station or soft-AP error"
+		case C.ESP_ERR_WIFI_NVS:
+			return "WiFi internal NVS module error"
+		case C.ESP_ERR_WIFI_MAC:
+			return "MAC address is invalid"
+		case C.ESP_ERR_WIFI_SSID:
+			return " SSID is invalid"
+		case C.ESP_ERR_WIFI_PASSWORD:
+			return "Password is invalid"
+		case C.ESP_ERR_WIFI_TIMEOUT:
+			return "Timeout error"
+		case C.ESP_ERR_WIFI_WAKE_FAIL:
+			return "WiFi is in sleep state(RF closed) and wakeup fail"
+		case C.ESP_ERR_WIFI_WOULD_BLOCK:
+			return "The caller would block"
+		case C.ESP_ERR_WIFI_NOT_CONNECT:
+			return "Station still in disconnect status"
+		case C.ESP_ERR_WIFI_POST:
+			return "Failed to post the event to WiFi task"
+		case C.ESP_ERR_WIFI_INIT_STATE:
+			return "Invalid WiFi state when init/deinit is called"
+		case C.ESP_ERR_WIFI_STOP_STATE:
+			return "Returned when WiFi is stopping"
+		case C.ESP_ERR_WIFI_NOT_ASSOC:
+			return "The WiFi connection is not associated"
+		case C.ESP_ERR_WIFI_TX_DISALLOW:
+			return "The WiFi TX is disallowed"
+		default:
+			return "Other WiFi error"
+		}
+	default:
+		return "Other error"
+	}
+}

espnet/espnet.c

@@ -0,0 +1,829 @@
+#include <stdint.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "espnet.h"
+#include "esp_wifi.h"
+#include "esp_private/wifi.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/semphr.h"
+#include "freertos/task.h"
+
+
+// Stub functions, to know which functions need to be implemented for OS
+// functionality.
+
+static bool _env_is_chip(void) {
+	printf("called: _env_is_chip\n");
+	return false;
+}
+static void _set_intr(int32_t cpu_no, uint32_t intr_source, uint32_t intr_num, int32_t intr_prio) {
+	printf("called: _set_intr\n");
+}
+static void _clear_intr(uint32_t intr_source, uint32_t intr_num) {
+	printf("called: _clear_intr\n");
+}
+static void _set_isr(int32_t n, void *f, void *arg) {
+	printf("called: _set_isr\n");
+}
+static void _ints_on(uint32_t mask) {
+	printf("called: _ints_on\n");
+}
+static void _ints_off(uint32_t mask) {
+	printf("called: _ints_off\n");
+}
+static bool _is_from_isr(void) {
+	printf("called: _is_from_isr\n");
+	return false;
+}
+
+// Having conflict between when include 
+// #include "freertos/portmacro.h" 
+
+typedef struct {
+	/* owner field values:
+	 * 0				- Uninitialized (invalid)
+	 * portMUX_FREE_VAL - Mux is free, can be locked by either CPU
+	 * CORE_ID_REGVAL_PRO / CORE_ID_REGVAL_APP - Mux is locked to the particular core
+	 *
+	 *
+	 * Any value other than portMUX_FREE_VAL, CORE_ID_REGVAL_PRO, CORE_ID_REGVAL_APP indicates corruption
+	 */
+	uint32_t owner;
+	/* count field:
+	 * If mux is unlocked, count should be zero.
+	 * If mux is locked, count is non-zero & represents the number of recursive locks on the mux.
+	 */
+	uint32_t count;
+} portMUX_TYPE;
+
+#define portMUX_FREE_VAL	SPINLOCK_FREE
+#define SPINLOCK_FREE	   0xB33FFFFF
+
+#define portMUX_INITIALIZER_UNLOCKED {					\
+		.owner = portMUX_FREE_VAL,						\
+		.count = 0,										\
+	}
+
+static void * _spin_lock_create(void) {
+	portMUX_TYPE tmp = portMUX_INITIALIZER_UNLOCKED;
+	void *mux = malloc(sizeof(portMUX_TYPE));
+	if (mux) {
+		memcpy(mux,&tmp,sizeof(portMUX_TYPE));
+		return mux;
+	}
+	return NULL;
+}
+static void _spin_lock_delete(void *lock) {
+	free(lock);
+}
+static uint32_t _wifi_int_disable(void *wifi_int_mux) {
+	printf("called: _wifi_int_disable\n");
+	return 0;
+}
+static void _wifi_int_restore(void *wifi_int_mux, uint32_t tmp) {
+	printf("called: _wifi_int_restore\n");
+}
+static void _task_yield_from_isr(void) {
+	printf("called: _task_yield_from_isr\n");
+}
+static void *_semphr_create(uint32_t max, uint32_t init) {
+	return (void *)xSemaphoreCreateCounting(max, init);
+}
+static void _semphr_delete(void *semphr) {
+	vSemaphoreDelete(semphr);
+}
+static int32_t _semphr_take(void *semphr, uint32_t block_time_tick) {
+	if (block_time_tick == OSI_FUNCS_TIME_BLOCKING) {
+		return (int32_t)xSemaphoreTake(semphr, portMAX_DELAY);
+	} else {
+		return (int32_t)xSemaphoreTake(semphr, block_time_tick);
+	}
+}
+static int32_t _semphr_give(void *semphr) {
+	return (int32_t)xSemaphoreGive(semphr);
+}
+static void *_wifi_thread_semphr_get(void) {
+	static SemaphoreHandle_t sem = NULL;
+	if (!sem) {
+		sem = xSemaphoreCreateCounting(1, 0);
+	}
+	return (void*)sem;
+}
+static void *_mutex_create(void) {
+	printf("called: _mutex_create\n");
+	return NULL;
+}
+
+static void *_recursive_mutex_create(void) {
+	return xSemaphoreCreateRecursiveMutex();
+}
+static void _mutex_delete(void *mutex) {
+	return vSemaphoreDelete(mutex);
+}
+static int32_t _mutex_lock(void *mutex) {
+	return (int32_t)xSemaphoreTakeRecursive(mutex, portMAX_DELAY);
+}
+static int32_t _mutex_unlock(void *mutex) {
+	return (int32_t)xSemaphoreGiveRecursive(mutex);
+}
+static void * _queue_create(uint32_t queue_len, uint32_t item_size) {
+	printf("called: _queue_create\n");
+	return NULL;
+}
+static void _queue_delete(void *queue) {
+	printf("called: _queue_delete\n");
+}
+static int32_t _queue_send(void *queue, void *item, uint32_t block_time_tick) {
+	if (block_time_tick == OSI_FUNCS_TIME_BLOCKING) {
+		return (int32_t)xQueueSend(queue, item, portMAX_DELAY);
+	} else {
+		return (int32_t)xQueueSend(queue, item, block_time_tick);
+	}
+}
+static int32_t _queue_send_from_isr(void *queue, void *item, void *hptw) {
+	printf("called: _queue_send_from_isr\n");
+	return 0;
+}
+static int32_t _queue_send_to_back(void *queue, void *item, uint32_t block_time_tick) {
+	printf("called: _queue_send_to_back\n");
+	return 0;
+}
+static int32_t _queue_send_to_front(void *queue, void *item, uint32_t block_time_tick) {
+	printf("called: _queue_send_to_front\n");
+	return 0;
+}
+static int32_t _queue_recv(void *queue, void *item, uint32_t block_time_tick) {
+	if (block_time_tick == OSI_FUNCS_TIME_BLOCKING) {
+		return (int32_t)xQueueReceive(queue, item, portMAX_DELAY);
+	} else {
+		return (int32_t)xQueueReceive(queue, item, block_time_tick);
+	}
+}
+static void * _event_group_create(void) {
+	printf("called: _event_group_create\n");
+	return NULL;
+}
+static void _event_group_delete(void *event) {
+	printf("called: _event_group_delete\n");
+}
+static uint32_t _event_group_set_bits(void *event, uint32_t bits) {
+	printf("called: _event_group_set_bits\n");
+	return 0;
+}
+static uint32_t _event_group_clear_bits(void *event, uint32_t bits) {
+	printf("called: _event_group_clear_bits\n");
+	return 0;
+}
+static uint32_t _event_group_wait_bits(void *event, uint32_t bits_to_wait_for, int clear_on_exit, int wait_for_all_bits, uint32_t block_time_tick) {
+	printf("called: _event_group_wait_bits\n");
+	return 0;
+}
+
+#define P(x) printf("called: "#x"\n");
+
+static int32_t _task_create_pinned_to_core(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle, uint32_t core_id) {
+	// Note: using xTaskCreate instead of xTaskCreatePinnedToCore.
+	return (uint32_t)xTaskCreate(task_func, name, stack_depth, param, prio, task_handle);
+}
+static int32_t _task_create(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle) {
+	P(_task_create)
+	return 0;
+}
+static void _task_delete(void *task_handle) {
+	P(_task_delete)
+}
+static int32_t _task_ms_to_tick(uint32_t ms) {
+	return (int32_t)(ms / portTICK_PERIOD_MS);
+}
+static int32_t _task_get_max_priority() {
+	return configMAX_PRIORITIES;
+}
+static int32_t _event_post(const char* event_base, int32_t event_id, void* event_data, size_t event_data_size, uint32_t ticks_to_wait) {
+	P(_event_post)
+	return 0;
+}
+static uint32_t  _get_free_heap_size(void) {
+	P(_get_free_heap_size)
+	return 0;
+}
+static uint32_t  _rand(void) {
+	P(_rand)
+	return 0;
+}
+static void _dport_access_stall_other_cpu_start_wrap(void) {
+	P(_dport_access_stall_other_cpu_start_wrap)
+}
+static void _dport_access_stall_other_cpu_end_wrap(void) {
+	P(_dport_access_stall_other_cpu_end_wrap)
+}
+static void _wifi_apb80m_request(void) {
+	P(_wifi_apb80m_request)
+}
+static void _wifi_apb80m_release(void) {
+	P(_wifi_apb80m_release)
+}
+static void _phy_disable(void) {
+	P(_phy_disable)
+}
+static void _phy_enable(void) {
+	P(_phy_enable)
+}
+static int _phy_update_country_info(const char* country) {
+	P(_phy_update_country_info)
+	return 0;
+}
+static int _read_mac(uint8_t* mac, uint32_t type) {
+	P(_read_mac)
+	return 0;
+}
+static void _timer_arm(void *timer, uint32_t tmout, bool repeat) {
+	P(_timer_arm)
+}
+static void _timer_disarm(void *timer) {
+	P(_timer_disarm)
+}
+static void _timer_done(void *ptimer) {
+	P(_timer_done)
+}
+static void _timer_setfn(void *ptimer, void *pfunction, void *parg) {
+	P(_timer_setfn)
+}
+static void _timer_arm_us(void *ptimer, uint32_t us, bool repeat) {
+	P(_timer_arm_us)
+}
+static void _wifi_reset_mac(void) {
+	P(_wifi_reset_mac)
+}
+static void _wifi_clock_enable(void) {
+	P(_wifi_clock_enable)
+}
+static void _wifi_clock_disable(void) {
+	P(_wifi_clock_disable)
+}
+static void _wifi_rtc_enable_iso(void) {
+	P(_wifi_rtc_enable_iso)
+}
+static void _wifi_rtc_disable_iso(void) {
+	P(_wifi_rtc_disable_iso)
+}
+static int64_t _esp_timer_get_time(void) {
+	P(_esp_timer_get_time)
+	return 0;
+}
+static int _nvs_set_i8(uint32_t handle, const char* key, int8_t value) {
+	P(_nvs_set_i8)
+	return 0;
+}
+static int _nvs_get_i8(uint32_t handle, const char* key, int8_t* out_value) {
+	P(_nvs_get_i8)
+	return 0;
+}
+static int _nvs_set_u8(uint32_t handle, const char* key, uint8_t value) {
+	P(_nvs_set_u8)
+	return 0;
+}
+static int _nvs_get_u8(uint32_t handle, const char* key, uint8_t* out_value) {
+	P(_nvs_get_u8)
+	return 0;
+}
+static int _nvs_set_u16(uint32_t handle, const char* key, uint16_t value) {
+	P(_nvs_set_u16)
+	return 0;
+}
+static int _nvs_get_u16(uint32_t handle, const char* key, uint16_t* out_value) {
+	P(_nvs_get_u16)
+	return 0;
+}
+static int _nvs_open(const char* name, uint32_t open_mode, uint32_t *out_handle) {
+	P(_nvs_open)
+	return 0;
+}
+static void _nvs_close(uint32_t handle) {
+	P(_nvs_close)
+}
+static int _nvs_commit(uint32_t handle) {
+	P(_nvs_commit)
+	return 0;
+}
+static int _nvs_set_blob(uint32_t handle, const char* key, const void* value, size_t length) {
+	P(_nvs_set_blob)
+	return 0;
+}
+static int _nvs_get_blob(uint32_t handle, const char* key, void* out_value, size_t* length) {
+	P(_nvs_get_blob)
+	return 0;
+}
+static int _nvs_erase_key(uint32_t handle, const char* key) {
+	P(_nvs_erase_key)
+	return 0;
+}
+static int _get_random(uint8_t *buf, size_t len) {
+	P(_get_random)
+	return 0;
+}
+static int _get_time(void *t) {
+	P(_get_time)
+	return 0;
+}
+static unsigned long _random(void) {
+	P(_random)
+	return 0;
+}
+// #if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3
+//	 uint32_t (* _slowclk_cal_get(void)
+// #endif
+static void _log_write(uint32_t level, const char* tag, const char* format, ...) {
+	va_list argList;
+	printf("[%s] ", tag);
+	va_start(argList, format);
+	vprintf(format, argList);
+	va_end(argList);
+	printf("\n");
+}
+static void _log_writev(uint32_t level, const char* tag, const char* format, va_list args) {
+	printf("[%s] ", tag);
+	vprintf(format, args);
+	printf("\n");
+}
+
+static uint32_t  _log_timestamp(void) {
+	P(_log_timestamp)
+	return 0;
+}
+static void* _malloc_internal(size_t size) {
+	printf("called: _malloc_internal(%d)\n", size);
+	return malloc(size);
+}
+static void* _realloc_internal(void *ptr, size_t size) {
+	printf("called: _realloc_internal(%p,%d)\n", ptr, size);
+	return NULL;
+}
+
+static void* _calloc_internal(size_t n, size_t size) {
+	printf("called: _calloc_internal(%d,%d)\n", n, size);
+	return malloc(n * size);
+}
+static void* _zalloc_internal(size_t size) {
+	printf("called: _zalloc_internal(%d)\n", size);
+	return NULL;
+}
+static void* _wifi_malloc(size_t size) {
+	return malloc(size);
+}
+static void* _wifi_realloc(void *ptr, size_t size) {
+	printf("called: _wifi_realloc(%d)\n", size);
+	return NULL;
+}
+static void* _wifi_calloc(size_t n, size_t size) {
+	return calloc(n, size);
+}
+static void* _wifi_zalloc(size_t size) {
+	return calloc(1, size);
+}
+static void* _wifi_create_queue(int queue_len, int item_size) {
+	wifi_static_queue_t *queue = (wifi_static_queue_t*)malloc(sizeof(wifi_static_queue_t));
+	queue->handle = xQueueCreate( queue_len, item_size);
+	return queue;
+}
+static void _wifi_delete_queue(void * queue) {
+	vQueueDelete(queue);
+}
+static int _coex_init(void) {
+	P(_coex_init)
+	return 0;
+}
+static void _coex_deinit(void) {
+	P(_coex_deinit)
+}
+static int _coex_enable(void) {
+	P(_coex_enable)
+	return 0;
+}
+static void _coex_disable(void) {
+	P(_coex_disable)
+}
+static uint32_t  _coex_status_get(void) {
+	P(_coex_status_get)
+	return 0;
+}
+static void _coex_condition_set(uint32_t type, bool dissatisfy) {
+	P(_coex_condition_set)
+}
+static int _coex_wifi_request(uint32_t event, uint32_t latency, uint32_t duration) {
+	P(_coex_wifi_request)
+	return 0;
+}
+static int _coex_wifi_release(uint32_t event) {
+	P(_coex_wifi_release)
+	return 0;
+}
+static int _coex_wifi_channel_set(uint8_t primary, uint8_t secondary) {
+	P(_coex_wifi_channel_set)
+	return 0;
+}
+static int _coex_event_duration_get(uint32_t event, uint32_t *duration) {
+	P(_coex_event_duration_get)
+	return 0;
+}
+static int _coex_pti_get(uint32_t event, uint8_t *pti) {
+	P(_coex_pti_get)
+	return 0;
+}
+static void _coex_schm_status_bit_clear(uint32_t type, uint32_t status) {
+	P(_coex_schm_status_bit_clear)
+}
+static void _coex_schm_status_bit_set(uint32_t type, uint32_t status) {
+	P(_coex_schm_status_bit_set)
+}
+static int _coex_schm_interval_set(uint32_t interval) {
+	P(_coex_schm_interval_set)
+	return 0;
+}
+static uint32_t  _coex_schm_interval_get(void) {
+	P(_coex_schm_interval_get)
+	return 0;
+}
+static uint8_t _coex_schm_curr_period_get(void) {
+	P(_coex_schm_curr_period_get)
+	return 0;
+}
+static void* _coex_schm_curr_phase_get(void) {
+	P(_coex_schm_curr_phase_get)
+	return NULL;
+}
+static int _coex_schm_curr_phase_idx_set(int idx) {
+	P(_coex_schm_curr_phase_idx_set)
+	return 0;
+}
+static int _coex_schm_curr_phase_idx_get(void) {
+	P(_coex_schm_curr_phase_idx_get)
+	return 0;
+}
+
+
+uint32_t _slowclk_cal_get(void) {
+	return 0;
+}
+
+// OS adapter functions.
+// See: esp-idf/components/esp_wifi/include/esp_private/wifi_os_adapter.h
+wifi_osi_funcs_t g_wifi_osi_funcs = {
+	._version = ESP_WIFI_OS_ADAPTER_VERSION,
+	._env_is_chip = _env_is_chip,
+	._set_intr = _set_intr,
+	._clear_intr = _clear_intr,
+	._set_isr = _set_isr,
+	._ints_on = _ints_on,
+	._ints_off = _ints_off,
+	._is_from_isr = _is_from_isr,
+	._spin_lock_create = _spin_lock_create,
+	._spin_lock_delete = _spin_lock_delete,
+	._wifi_int_disable = _wifi_int_disable,
+	._wifi_int_restore = _wifi_int_restore,
+	._task_yield_from_isr = _task_yield_from_isr,
+	._semphr_create = _semphr_create,
+	._semphr_delete = _semphr_delete,
+	._semphr_take = _semphr_take,
+	._semphr_give = _semphr_give,
+	._wifi_thread_semphr_get = _wifi_thread_semphr_get,
+	._mutex_create = _mutex_create,
+	._recursive_mutex_create = _recursive_mutex_create,
+	._mutex_delete = _mutex_delete,
+	._mutex_lock = _mutex_lock,
+	._mutex_unlock = _mutex_unlock,
+	._queue_create = _queue_create,
+	._queue_delete = _queue_delete,
+	._queue_send = _queue_send,
+	._queue_send_from_isr = _queue_send_from_isr,
+	._queue_send_to_back = _queue_send_to_back,
+	._queue_send_to_front = _queue_send_to_front,
+	._queue_recv = _queue_recv,
+	._queue_msg_waiting = (uint32_t(*)(void *))uxQueueMessagesWaiting,
+	._event_group_create = _event_group_create,
+	._event_group_delete = _event_group_delete,
+	._event_group_set_bits = _event_group_set_bits,
+	._event_group_clear_bits = _event_group_clear_bits,
+	._event_group_wait_bits = _event_group_wait_bits,
+	._task_create_pinned_to_core = _task_create_pinned_to_core,
+	._task_create = _task_create,
+	._task_delete = _task_delete,
+	._task_delay = vTaskDelay,
+	._task_ms_to_tick = _task_ms_to_tick,
+	._task_get_current_task = (void *(*)(void))xTaskGetCurrentTaskHandle,
+	._task_get_max_priority = _task_get_max_priority,
+	._malloc = malloc,
+	._free = free,
+	._event_post = _event_post,
+	._get_free_heap_size = _get_free_heap_size,
+	._rand = _rand,
+	._dport_access_stall_other_cpu_start_wrap = _dport_access_stall_other_cpu_start_wrap,
+	._dport_access_stall_other_cpu_end_wrap = _dport_access_stall_other_cpu_end_wrap,
+	._wifi_apb80m_request = _wifi_apb80m_request,
+	._wifi_apb80m_release = _wifi_apb80m_release,
+	._phy_disable = _phy_disable,
+	._phy_enable = _phy_enable,
+	._phy_update_country_info = _phy_update_country_info,
+	._read_mac = _read_mac,
+	._timer_arm = _timer_arm,
+	._timer_disarm = _timer_disarm,
+	._timer_done = _timer_done,
+	._timer_setfn = _timer_setfn,
+	._timer_arm_us = _timer_arm_us,
+	._wifi_reset_mac = _wifi_reset_mac,
+	._wifi_clock_enable = _wifi_clock_enable,
+	._wifi_clock_disable = _wifi_clock_disable,
+	._wifi_rtc_enable_iso = _wifi_rtc_enable_iso,
+	._wifi_rtc_disable_iso = _wifi_rtc_disable_iso,
+	._esp_timer_get_time = _esp_timer_get_time,
+	._nvs_set_i8 = _nvs_set_i8,
+	._nvs_get_i8 = _nvs_get_i8,
+	._nvs_set_u8 = _nvs_set_u8,
+	._nvs_get_u8 = _nvs_get_u8,
+	._nvs_set_u16 = _nvs_set_u16,
+	._nvs_get_u16 = _nvs_get_u16,
+	._nvs_open = _nvs_open,
+	._nvs_close = _nvs_close,
+	._nvs_commit = _nvs_commit,
+	._nvs_set_blob = _nvs_set_blob,
+	._nvs_get_blob = _nvs_get_blob,
+	._nvs_erase_key = _nvs_erase_key,
+	._get_random = _get_random,
+	._get_time = _get_time,
+	._random = _random,
+#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3
+	._slowclk_cal_get = _slowclk_cal_get,
+#endif
+	._log_write = _log_write,
+	._log_writev = _log_writev,
+	._log_timestamp = _log_timestamp,
+	._malloc_internal = _malloc_internal,
+	._realloc_internal = _realloc_internal,
+	._calloc_internal = _calloc_internal,
+	._zalloc_internal = _zalloc_internal,
+	._wifi_malloc = _wifi_malloc,
+	._wifi_realloc = _wifi_realloc,
+	._wifi_calloc = _wifi_calloc,
+	._wifi_zalloc = _wifi_zalloc,
+	._wifi_create_queue = _wifi_create_queue,
+	._wifi_delete_queue = _wifi_delete_queue,
+	._coex_init = _coex_init,
+	._coex_deinit = _coex_deinit,
+	._coex_enable = _coex_enable,
+	._coex_disable = _coex_disable,
+	._coex_status_get = _coex_status_get,
+	._coex_condition_set = _coex_condition_set,
+	._coex_wifi_request = _coex_wifi_request,
+	._coex_wifi_release = _coex_wifi_release,
+	._coex_wifi_channel_set = _coex_wifi_channel_set,
+	._coex_event_duration_get = _coex_event_duration_get,
+	._coex_pti_get = _coex_pti_get,
+	._coex_schm_status_bit_clear = _coex_schm_status_bit_clear,
+	._coex_schm_status_bit_set = _coex_schm_status_bit_set,
+	._coex_schm_interval_set = _coex_schm_interval_set,
+	._coex_schm_interval_get = _coex_schm_interval_get,
+	._coex_schm_curr_period_get = _coex_schm_curr_period_get,
+	._coex_schm_curr_phase_get = _coex_schm_curr_phase_get,
+	._coex_schm_curr_phase_idx_set = _coex_schm_curr_phase_idx_set,
+	._coex_schm_curr_phase_idx_get = _coex_schm_curr_phase_idx_get,
+
+	._magic = ESP_WIFI_OS_ADAPTER_MAGIC,
+};
+
+static int esp_aes_wrap(const unsigned char *kek, int n, const unsigned char *plain, unsigned char *cipher) {
+	P(aes_wrap)
+	return -1;
+}
+static int esp_aes_unwrap(const unsigned char *kek, int n, const unsigned char *cipher, unsigned char *plain) {
+	P(aes_unwrap)
+	return -1;	
+}
+static int hmac_sha256_vector(const unsigned char *key, int key_len, int num_elem,
+	const unsigned char *addr[], const int *len, unsigned char *mac) {
+	return -1;
+}
+static int sha256_prf(const unsigned char *key, int key_len, const char *label,
+								   const unsigned char *data, int data_len, unsigned char *buf, int buf_len) {
+	P(sha256_prf)
+	return -1;
+}
+static int hmac_md5(const unsigned char *key, unsigned int key_len, const unsigned char *data,
+							  unsigned int data_len, unsigned char *mac) {
+	P(hmac_md5)
+	return -1;
+}
+static int hamc_md5_vector(const unsigned char *key, unsigned int key_len, unsigned int num_elem,
+							  const unsigned char *addr[], const unsigned int *len, unsigned char *mac) {
+	P(hamc_md5_vector)
+	return -1;							
+}
+static int hmac_sha1(const unsigned char *key, unsigned int key_len, const unsigned char *data,
+							  unsigned int data_len, unsigned char *mac) {
+	P(hmac_sha1)
+	return -1;
+}
+static int hmac_sha1_vector(const unsigned char *key, unsigned int key_len, unsigned int num_elem,
+							  const unsigned char *addr[], const unsigned int *len, unsigned char *mac) {
+	P(hmac_sha1_vector)
+	return -1;
+}
+static int sha1_prf(const unsigned char *key, unsigned int key_len, const char *label,
+							  const unsigned char *data, unsigned int data_len, unsigned char *buf, unsigned int buf_len) {
+	P(sha1_prf)
+	return -1;
+}
+static int sha1_vector(unsigned int num_elem, const unsigned char *addr[], const unsigned int *len,
+							  unsigned char *mac) {
+	P(sha1_vector)
+	return -1;
+}
+static int pbkdf2_sha1(const char *passphrase, const char *ssid, unsigned int ssid_len,
+							  int iterations, unsigned char *buf, unsigned int buflen) {
+	P(pbkdf2_sha1)
+	return -1;
+}
+static int rc4_skip(const unsigned char *key, unsigned int keylen, unsigned int skip,
+							  unsigned char *data, unsigned int data_len) {
+	P(rc4_skip)
+	return -1;
+}
+static int md5_vector(unsigned int num_elem, const unsigned char *addr[], const unsigned int *len,
+							  unsigned char *mac) {
+	P(md5_vector)
+	return -1;
+}
+static void aes_encrypt(void *ctx, const unsigned char *plain, unsigned char *crypt) {
+	P(aes_encrypt)
+}
+static void * aes_encrypt_init(const unsigned char *key,  unsigned int len) {
+	P(aes_encrypt_init)
+	return NULL;
+}
+static void aes_encrypt_deinit(void *ctx) {
+	P(aes_encrypt_deinit)
+}
+static void aes_decrypt(void *ctx, const unsigned char *crypt, unsigned char *plain) {
+	P(aes_decrypt)
+}
+static void * aes_decrypt_init(const unsigned char *key, unsigned int len) {
+	P(aes_decrypt_init)
+	return NULL;
+}
+static void aes_decrypt_deinit(void *ctx) {
+	P(aes_decrypt_deinit)
+}
+static int aes_128_decrypt(const unsigned char *key, const unsigned char *iv, unsigned char *data, int data_len) {
+	P(aes_128_decrypt)
+	return -1;
+}
+static int omac1_aes_128(const uint8_t *key, const uint8_t *data, size_t data_len,
+								   uint8_t *mic) {
+	P(omac1_aes_128)
+	return -1;
+}
+static uint8_t * ccmp_decrypt(const uint8_t *tk, const uint8_t *ieee80211_hdr,
+										const uint8_t *data, size_t data_len,
+										size_t *decrypted_len, bool espnow_pkt) {
+	P(ccmp_decrypt)
+	return NULL;
+}
+static uint8_t * ccmp_encrypt(const uint8_t *tk, uint8_t *frame, size_t len, size_t hdrlen,
+										uint8_t *pn, int keyid, size_t *encrypted_len) {
+	P(ccmp_encrypt)
+	return NULL;
+}
+static int hmac_md5_vector(const unsigned char *key, unsigned int key_len, unsigned int num_elem,
+							  const unsigned char *addr[], const unsigned int *len, unsigned char *mac) {
+	P(hmac_md5_vector)
+	return -1;
+}
+static void esp_aes_encrypt(void *ctx, const unsigned char *plain, unsigned char *crypt) {
+	P(esp_aes_encrypt)
+}
+static void esp_aes_decrypt(void *ctx, const unsigned char *crypt, unsigned char *plain) {
+	P(esp_aes_decrypt)
+}
+static int aes_128_cbc_encrypt(const unsigned char *key, const unsigned char *iv, unsigned char *data, int data_len) {
+	P(aes_128_cbc_encrypt)
+	return -1;
+}
+static int aes_128_cbc_decrypt(const unsigned char *key, const unsigned char *iv, unsigned char *data, int data_len) {
+	P(aes_128_cbc_decrypt)
+	return -1;
+}
+
+const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs = {
+	.size = sizeof(wpa_crypto_funcs_t),
+	.version = ESP_WIFI_CRYPTO_VERSION,
+	.aes_wrap = (esp_aes_wrap_t)esp_aes_wrap,
+	.aes_unwrap = (esp_aes_unwrap_t)esp_aes_unwrap,
+	.hmac_sha256_vector = (esp_hmac_sha256_vector_t)hmac_sha256_vector,
+	.sha256_prf = (esp_sha256_prf_t)sha256_prf,
+	.hmac_md5 = (esp_hmac_md5_t)hmac_md5,
+	.hamc_md5_vector = (esp_hmac_md5_vector_t)hmac_md5_vector,
+	.hmac_sha1 = (esp_hmac_sha1_t)hmac_sha1,
+	.hmac_sha1_vector = (esp_hmac_sha1_vector_t)hmac_sha1_vector,
+	.sha1_prf = (esp_sha1_prf_t)sha1_prf,
+	.sha1_vector = (esp_sha1_vector_t)sha1_vector,
+	.pbkdf2_sha1 = (esp_pbkdf2_sha1_t)pbkdf2_sha1,
+	.rc4_skip = (esp_rc4_skip_t)rc4_skip,
+	.md5_vector = (esp_md5_vector_t)md5_vector,
+	.aes_encrypt = (esp_aes_encrypt_t)esp_aes_encrypt,
+	.aes_encrypt_init = (esp_aes_encrypt_init_t)aes_encrypt_init,
+	.aes_encrypt_deinit = (esp_aes_encrypt_deinit_t)aes_encrypt_deinit,
+	.aes_decrypt = (esp_aes_decrypt_t)esp_aes_decrypt,
+	.aes_decrypt_init = (esp_aes_decrypt_init_t)aes_decrypt_init,
+	.aes_decrypt_deinit = (esp_aes_decrypt_deinit_t)aes_decrypt_deinit,
+	.aes_128_encrypt = (esp_aes_128_encrypt_t)aes_128_cbc_encrypt,
+	.aes_128_decrypt = (esp_aes_128_decrypt_t)aes_128_cbc_decrypt,
+	.omac1_aes_128 = (esp_omac1_aes_128_t)omac1_aes_128,
+	.ccmp_decrypt = (esp_ccmp_decrypt_t)ccmp_decrypt,
+	.ccmp_encrypt = (esp_ccmp_encrypt_t)ccmp_encrypt
+};
+
+// This is a string constant that is used all over ESP-IDF and is also used by
+// libnet80211.a. The main purpose is to be a fixed pointer that can be compared
+// against etc.
+const char *WIFI_EVENT = "WIFI_EVENT";
+
+// Required by libphy.a
+int phy_printf(const char *format, ...) {
+	va_list args;
+	va_start(args, format);
+	printf("phy: ");
+	int res = vprintf(format, args);
+	va_end(args);
+	return res;
+}
+
+// Required by libpp.a
+int pp_printf(const char *format, ...) {
+	va_list args;
+	va_start(args, format);
+	printf("pp: ");
+	int res = vprintf(format, args);
+	va_end(args);
+	return res;
+}
+
+// Required by libnet80211.a
+int net80211_printf(const char *format, ...) {
+	va_list args;
+	va_start(args, format);
+	printf("net80211: ");
+	int res = vprintf(format, args);
+	va_end(args);
+	return res;
+}
+
+// Source: esp-idf/components/wpa_supplicant/src/utils/common.c
+static int hex2num(char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if (c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+	return -1;
+}
+
+// Source: esp-idf/components/wpa_supplicant/src/utils/common.c
+int hex2byte(const char *hex)
+{
+	int a, b;
+	a = hex2num(*hex++);
+	if (a < 0)
+		return -1;
+	b = hex2num(*hex++);
+	if (b < 0)
+		return -1;
+	return (a << 4) | b;
+}
+
+// Source: esp-idf/components/wpa_supplicant/src/utils/common.c
+/**
+ * hexstr2bin - Convert ASCII hex string into binary data
+ * @hex: ASCII hex string (e.g., "01ab")
+ * @buf: Buffer for the binary data
+ * @len: Length of the text to convert in bytes (of buf); hex will be double
+ * this size
+ * Returns: 0 on success, -1 on failure (invalid hex string)
+ */
+int hexstr2bin(const char *hex, uint8_t *buf, size_t len)
+{
+	size_t i;
+	int a;
+	const char *ipos = hex;
+	uint8_t *opos = buf;
+
+	for (i = 0; i < len; i++) {
+		a = hex2byte(ipos);
+		if (a < 0)
+			return -1;
+		*opos++ = a;
+		ipos += 2;
+	}
+	return 0;
+}

espnet/espnet.h

@@ -0,0 +1,5 @@
+#include <stdbool.h>
+
+#include "esp_private/wifi_os_adapter.h"
+
+extern wifi_osi_funcs_t g_wifi_osi_funcs;

examples/adt7410/main.go

@@ -19,8 +19,8 @@ func main() {
 	sensor.Configure()
 
 	for {
-		temp, _ := sensor.ReadTemperature()
+		temp := sensor.ReadTempF()
-		fmt.Printf("temperature: %f°C\r\n", temp.Celsius())
+		fmt.Printf("temperature: %f\r\n", temp)
 		time.Sleep(time.Second)
 	}
 

examples/bme280/main.go

@@ -22,7 +22,7 @@ func main() {
 
 	for {
 		temp, _ := sensor.ReadTemperature()
-		println("Temperature:", strconv.FormatFloat(float64(temp.Celsius()), 'f', 2, 64), "°C")
+		println("Temperature:", strconv.FormatFloat(float64(temp)/1000, 'f', 2, 64), "°C")
 		press, _ := sensor.ReadPressure()
 		println("Pressure:", strconv.FormatFloat(float64(press)/100000, 'f', 2, 64), "hPa")
 		hum, _ := sensor.ReadHumidity()

examples/bmi160/main.go

@@ -27,7 +27,7 @@ func main() {
 			println("Error reading temperature", err)
 			continue
 		}
-		fmt.Printf("Temperature: %.2f °C\n", t.Celsius())
+		fmt.Printf("Temperature: %.2f °C\n", float32(t)/1000)
 
 		accelX, accelY, accelZ, err := sensor.ReadAcceleration()
 		if err != nil {

examples/bmp180/main.go

@@ -22,7 +22,7 @@ func main() {
 
 	for {
 		temp, _ := sensor.ReadTemperature()
-		println("Temperature:", temp.Celsius(), "°C")
+		println("Temperature:", float32(temp)/1000, "°C")
 
 		pressure, _ := sensor.ReadPressure()
 		println("Pressure", float32(pressure)/100000, "hPa")

examples/bmp280/main.go

@@ -30,7 +30,7 @@ func main() {
 			println("Error reading temperature")
 		}
 		// Temperature in degrees Celsius
-		fmt.Printf("Temperature: %.2f °C\n", t.Celsius())
+		fmt.Printf("Temperature: %.2f °C\n", float32(t)/1000)
 
 		p, err := sensor.ReadPressure()
 		if err != nil {

examples/bmp388/main.go

@@ -38,13 +38,13 @@ func main() {
 	}
 
 	for {
-		temp, err := sensor.ReadTemperature() // returns the temperature in millicelsius
+		temp, err := sensor.ReadTemperature() // returns the temperature in centicelsius
 		press, err := sensor.ReadPressure()   // returns the pressure in centipascals
 
 		if err != nil {
 			println(err)
 		} else {
-			println("Temperature:", temp/1000, "C")
+			println("Temperature: " + strconv.FormatInt(int64(temp), 10) + " cC")
 			println("Pressure:    " + strconv.FormatInt(int64(press), 10) + " cPa\n")
 		}
 

examples/ds3231/main.go

@@ -38,7 +38,7 @@ func main() {
 			fmt.Printf("Date: %d/%s/%02d %02d:%02d:%02d \r\n", dt.Year(), dt.Month(), dt.Day(), dt.Hour(), dt.Minute(), dt.Second())
 		}
 		temp, _ := rtc.ReadTemperature()
-		fmt.Printf("Temperature: %.2f °C \r\n", temp.Celsius())
+		fmt.Printf("Temperature: %.2f °C \r\n", float32(temp)/1000)
 
 		time.Sleep(time.Second * 1)
 	}

examples/espnet/main.go

@@ -0,0 +1,20 @@
+package main
+
+import "tinygo.org/x/drivers/espnet"
+
+func main() {
+	err := espnet.WiFi.Configure(espnet.Config{})
+	if err != nil {
+		println("failed to configure:", err.Error())
+	}
+	mac, err := espnet.WiFi.AccessPointMAC()
+	if err != nil {
+		println("failed to read MAC address:", err.Error())
+		return
+	}
+	print("MAC address:")
+	for _, b := range mac {
+		print(" ", b)
+	}
+	println()
+}

examples/lsm6ds3/main.go

@@ -23,8 +23,8 @@ func main() {
 		println("Acceleration:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
 		x, y, z = accel.ReadRotation()
 		println("Gyroscope:", float32(x)/1000000, float32(y)/1000000, float32(z)/1000000)
-		t, _ := accel.ReadTemperature()
+		x, _ = accel.ReadTemperature()
-		println("Degrees C", t.Celsius(), "\n\n")
+		println("Degrees C", float32(x)/1000, "\n\n")
 		time.Sleep(time.Millisecond * 1000)
 	}
 }

examples/lsm6dsox/main.go

@@ -6,7 +6,6 @@ import (
 	"machine"
 	"time"
 
-	"tinygo.org/x/drivers"
 	"tinygo.org/x/drivers/lsm6dsox"
 )
 
@@ -77,7 +76,7 @@ func calibrateGyro(device *lsm6dsox.Device) {
 }
 
 // Arduino IDE's Serial Plotter
-func printPlotter(ax, ay, az, gx, gy, gz int32, t drivers.Temperature) {
+func printPlotter(ax, ay, az, gx, gy, gz, t int32) {
 	if SHOW_ACCELERATION {
 		fmt.Printf("AX:%f, AY:%f, AZ:%f,", axis(ax, 0), axis(ay, 0), axis(az, 0))
 	}
@@ -85,7 +84,7 @@ func printPlotter(ax, ay, az, gx, gy, gz int32, t drivers.Temperature) {
 		fmt.Printf("GX:%f, GY:%f, GZ:%f,", axis(gx, cal[0]), axis(gy, cal[1]), axis(gz, cal[2]))
 	}
 	if SHOW_TEMPERATURE {
-		fmt.Printf("T:%f", t.Celsius())
+		fmt.Printf("T:%f", float32(t)/1000)
 	}
 	println()
 }

examples/mag3110/main.go

@@ -19,7 +19,7 @@ func main() {
 		println("Magnetic readings:", x, y, z)
 
 		c, _ := mag.ReadTemperature()
-		println("Temperature:", c.Celsius(), "°C")
+		println("Temperature:", float32(c)/1000, "°C")
 
 		time.Sleep(time.Millisecond * 100)
 	}

examples/tmp102/main.go

@@ -20,7 +20,7 @@ func main() {
 
 		temp, _ := thermo.ReadTemperature()
 
-		print(fmt.Sprintf("%.2f°C\r\n", temp.Celsius()))
+		print(fmt.Sprintf("%.2f°C\r\n", float32(temp)/1000.0))
 
 		time.Sleep(time.Millisecond * 1000)
 	}

lsm303agr/lsm303agr.go

@@ -191,14 +191,14 @@ func (d *Device) ReadCompass() (h int32) {
 }
 
 // ReadTemperature returns the temperature in Celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (c drivers.Temperature, e error) {
+func (d *Device) ReadTemperature() (c int32, e error) {
 
 	data1, data2 := []byte{0}, []byte{0}
 	d.bus.ReadRegister(uint8(d.AccelAddress), OUT_TEMP_H_A, data1)
 	d.bus.ReadRegister(uint8(d.AccelAddress), OUT_TEMP_L_A, data2)
 
 	t := int16((uint16(data1[0])<<8 | uint16(data2[0]))) >> 4 // temperature offsef from 25 °C
-	c = drivers.Temperature(t)*125 + 25000
+	c = int32((float32(25) + float32(t)/8) * 1000)
 	e = nil
 	return
 }

lsm6ds3/lsm6ds3.go

@@ -165,13 +165,13 @@ func (d *Device) ReadRotation() (x int32, y int32, z int32) {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (drivers.Temperature, error) {
+func (d *Device) ReadTemperature() (int32, error) {
 	d.bus.ReadRegister(uint8(d.Address), OUT_TEMP_L, d.dataBufferTwo)
 
 	// From "Table 5. Temperature sensor characteristics"
 	// temp = value/16 + 25
 	t := 25000 + (int32(int16((int16(d.dataBufferTwo[1])<<8)|int16(d.dataBufferTwo[0])))*125)/2
-	return drivers.Temperature(t), nil
+	return t, nil
 }
 
 // ReadSteps returns the steps of the pedometer

lsm6dsox/lsm6dsox.go

@@ -110,11 +110,11 @@ func (d *Device) ReadRotation() (x int32, y int32, z int32) {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (drivers.Temperature, error) {
+func (d *Device) ReadTemperature() (int32, error) {
 	d.bus.ReadRegister(uint8(d.Address), OUT_TEMP_L, d.dataBufferTwo)
 
 	// From "Table 4. Temperature sensor characteristics"
 	// temp = value/256 + 25
 	t := 25000 + (int32(int16((int16(d.dataBufferTwo[1])<<8)|int16(d.dataBufferTwo[0])))*125)/32
-	return drivers.Temperature(t), nil
+	return t, nil
 }

mag3110/mag3110.go

@@ -49,8 +49,8 @@ func (d Device) ReadMagnetic() (x int16, y int16, z int16) {
 
 // ReadTemperature reads and returns the current die temperature in
 // celsius milli degrees (°C/1000).
-func (d Device) ReadTemperature() (drivers.Temperature, error) {
+func (d Device) ReadTemperature() (int32, error) {
 	data := make([]byte, 1)
 	d.bus.ReadRegister(uint8(d.Address), DIE_TEMP, data)
-	return drivers.Temperature(data[0]) * 1000, nil
+	return int32(data[0]) * 1000, nil
 }

sht3x/sht3x.go

@@ -31,9 +31,9 @@ func New(bus drivers.I2C) Device {
 }
 
 // Read returns the temperature in celsius milli degrees (°C/1000).
-func (d *Device) ReadTemperature() (tempMilliCelsius drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (tempMilliCelsius int32, err error) {
 	tempMilliCelsius, _, err = d.ReadTemperatureHumidity()
-	return drivers.Temperature(tempMilliCelsius), err
+	return tempMilliCelsius, err
 }
 
 // Read returns the relative humidity in hundredths of a percent.
@@ -43,15 +43,15 @@ func (d *Device) ReadHumidity() (relativeHumidity int16, err error) {
 }
 
 // Read returns both the temperature and relative humidity.
-func (d *Device) ReadTemperatureHumidity() (tempMilliCelsius drivers.Temperature, relativeHumidity int16, err error) {
+func (d *Device) ReadTemperatureHumidity() (tempMilliCelsius int32, relativeHumidity int16, err error) {
 	var rawTemp, rawHum, errx = d.rawReadings()
 	if errx != nil {
 		err = errx
 		return
 	}
-	tempMilliCelsius = drivers.Temperature((35000 * int32(rawTemp) / 13107) - 45000)
+	tempMilliCelsius = (35000 * int32(rawTemp) / 13107) - 45000
 	relativeHumidity = int16(2000 * int32(rawHum) / 13107)
-	return
+	return tempMilliCelsius, relativeHumidity, err
 }
 
 // rawReadings returns the sensor's raw values of the temperature and humidity

thermistor/thermistor.go

@@ -29,8 +29,6 @@ package thermistor // import "tinygo.org/x/drivers/thermistor"
 import (
 	"machine"
 	"math"
-
-	"tinygo.org/x/drivers"
 )
 
 // Device holds the ADC pin and the needed settings for calculating the
@@ -63,7 +61,7 @@ func (d *Device) Configure() {
 }
 
 // ReadTemperature returns the temperature in celsius milli degrees (°C/1000)
-func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (temperature int32, err error) {
 	var reading uint32
 	if d.HighSide {
 		// Thermistor connected from analog input to high logic level.
@@ -84,5 +82,5 @@ func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error)
 	steinhart = 1.0 / steinhart                                 // Invert
 	steinhart -= 273.15                                         // convert to C
 
-	return drivers.Temperature(steinhart * 1000), nil
+	return int32(steinhart * 1000), nil
 }

tmp102/tmp102.go

@@ -46,7 +46,7 @@ func (d *Device) Connected() bool {
 }
 
 // Reads the temperature from the sensor and returns it in celsius milli degrees (°C/1000).
-func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error) {
+func (d *Device) ReadTemperature() (temperature int32, err error) {
 
 	tmpData := make([]byte, 2)
 
@@ -62,7 +62,7 @@ func (d *Device) ReadTemperature() (temperature drivers.Temperature, err error)
 		temperatureSum |= int32(0xf800)
 	}
 
-	temperature = drivers.Temperature(temperatureSum * 625 / 10)
+	temperature = temperatureSum * 625
 
-	return temperature, nil
+	return temperature / 10, nil
 }

units.go

@@ -1,17 +0,0 @@
-package drivers
-
-// This file contains some common units that can be used in a sensor driver.
-
-// Temperature is a temperature in Celsius milli degrees (°C/1000). For example,
-// the value 25000 is 25°C.
-type Temperature int32
-
-// Celsius returns the temperature in degrees Celsius.
-func (t Temperature) Celsius() float32 {
-	return float32(t) / 1000
-}
-
-// Fahrenheit returns the temperature in degrees Fahrenheit.
-func (t Temperature) Fahrenheit() float32 {
-	return t.Celsius()*1.8 + 32
-}

units_test.go

@@ -1,26 +0,0 @@
-package drivers
-
-import "testing"
-
-func TestTemperature(t *testing.T) {
-	tests := []struct {
-		t Temperature
-		c float32 // Celsius
-		f float32 // Fahrenheit
-	}{
-		{-40000, -40, -40}, // -40°C
-		{0, 0, 32},         // 0°C
-		{20000, 20, 68},    // 20°C
-		{25000, 25, 77},    // 25°C
-	}
-	for _, tc := range tests {
-		c := tc.t.Celsius()
-		f := tc.t.Fahrenheit()
-		if c != tc.c {
-			t.Errorf("expected value %d to be %f°C, but got %f°C", tc.t, tc.c, c)
-		}
-		if f != tc.f {
-			t.Errorf("expected value %d to be %f°F, but got %f°F", tc.t, tc.f, f)
-		}
-	}
-}