delay addition of extra error types until verifiably needed

nets/nets.go was replaced by netif/netif.go

mcp2515/mcp2515.go

@@ -236,16 +236,83 @@ func (d *Device) getMode() (byte, error) {
 }
 
 func (d *Device) configRate(speed, clock byte) error {
-	// TODO: add another baudrate
 	var cfg1, cfg2, cfg3 byte
 	set := true
 	switch clock {
 	case Clock16MHz:
 		switch speed {
+		case CAN5kBps:
+			cfg1 = mcp16mHz5kBpsCfg1
+			cfg2 = mcp16mHz5kBpsCfg2
+			cfg3 = mcp16mHz5kBpsCfg3
+		case CAN10kBps:
+			cfg1 = mcp16mHz10kBpsCfg1
+			cfg2 = mcp16mHz10kBpsCfg2
+			cfg3 = mcp16mHz10kBpsCfg3
+		case CAN20kBps:
+			cfg1 = mcp16mHz20kBpsCfg1
+			cfg2 = mcp16mHz20kBpsCfg2
+			cfg3 = mcp16mHz20kBpsCfg3
+		case CAN25kBps:
+			cfg1 = mcp16mHz25kBpsCfg1
+			cfg2 = mcp16mHz25kBpsCfg2
+			cfg3 = mcp16mHz25kBpsCfg3
+		case CAN31k25Bps:
+			cfg1 = mcp16mHz31k25BpsCfg1
+			cfg2 = mcp16mHz31k25BpsCfg2
+			cfg3 = mcp16mHz31k25BpsCfg3
+		case CAN33kBps:
+			cfg1 = mcp16mHz33kBpsCfg1
+			cfg2 = mcp16mHz33kBpsCfg2
+			cfg3 = mcp16mHz33kBpsCfg3
+		case CAN40kBps:
+			cfg1 = mcp16mHz40kBpsCfg1
+			cfg2 = mcp16mHz40kBpsCfg2
+			cfg3 = mcp16mHz40kBpsCfg3
+		case CAN47kBps:
+			cfg1 = mcp16mHz47kBpsCfg1
+			cfg2 = mcp16mHz47kBpsCfg2
+			cfg3 = mcp16mHz47kBpsCfg3
+		case CAN50kBps:
+			cfg1 = mcp16mHz50kBpsCfg1
+			cfg2 = mcp16mHz50kBpsCfg2
+			cfg3 = mcp16mHz50kBpsCfg3
+		case CAN80kBps:
+			cfg1 = mcp16mHz80kBpsCfg1
+			cfg2 = mcp16mHz80kBpsCfg2
+			cfg3 = mcp16mHz80kBpsCfg3
+		case CAN83k3Bps:
+			cfg1 = mcp16mHz83k3BpsCfg1
+			cfg2 = mcp16mHz83k3BpsCfg2
+			cfg3 = mcp16mHz83k3BpsCfg3
+		case CAN95kBps:
+			cfg1 = mcp16mHz95kBpsCfg1
+			cfg2 = mcp16mHz95kBpsCfg2
+			cfg3 = mcp16mHz95kBpsCfg3
+		case CAN100kBps:
+			cfg1 = mcp16mHz100kBpsCfg1
+			cfg2 = mcp16mHz100kBpsCfg2
+			cfg3 = mcp16mHz100kBpsCfg3
+		case CAN125kBps:
+			cfg1 = mcp16mHz125kBpsCfg1
+			cfg2 = mcp16mHz125kBpsCfg2
+			cfg3 = mcp16mHz125kBpsCfg3
+		case CAN200kBps:
+			cfg1 = mcp16mHz200kBpsCfg1
+			cfg2 = mcp16mHz200kBpsCfg2
+			cfg3 = mcp16mHz200kBpsCfg3
+		case CAN250kBps:
+			cfg1 = mcp16mHz250kBpsCfg1
+			cfg2 = mcp16mHz250kBpsCfg2
+			cfg3 = mcp16mHz250kBpsCfg3
 		case CAN500kBps:
 			cfg1 = mcp16mHz500kBpsCfg1
 			cfg2 = mcp16mHz500kBpsCfg2
 			cfg3 = mcp16mHz500kBpsCfg3
+		case CAN666kBps:
+			cfg1 = mcp16mHz666kBpsCfg1
+			cfg2 = mcp16mHz666kBpsCfg2
+			cfg3 = mcp16mHz666kBpsCfg3
 		case CAN1000kBps:
 			cfg1 = mcp16mHz1000kBpsCfg1
 			cfg2 = mcp16mHz1000kBpsCfg2
@@ -255,6 +322,50 @@ func (d *Device) configRate(speed, clock byte) error {
 		}
 	case Clock8MHz:
 		switch speed {
+		case CAN5kBps:
+			cfg1 = mcp8mHz5kBpsCfg1
+			cfg2 = mcp8mHz5kBpsCfg2
+			cfg3 = mcp8mHz5kBpsCfg3
+		case CAN10kBps:
+			cfg1 = mcp8mHz10kBpsCfg1
+			cfg2 = mcp8mHz10kBpsCfg2
+			cfg3 = mcp8mHz10kBpsCfg3
+		case CAN20kBps:
+			cfg1 = mcp8mHz20kBpsCfg1
+			cfg2 = mcp8mHz20kBpsCfg2
+			cfg3 = mcp8mHz20kBpsCfg3
+		case CAN31k25Bps:
+			cfg1 = mcp8mHz31k25BpsCfg1
+			cfg2 = mcp8mHz31k25BpsCfg2
+			cfg3 = mcp8mHz31k25BpsCfg3
+		case CAN40kBps:
+			cfg1 = mcp8mHz40kBpsCfg1
+			cfg2 = mcp8mHz40kBpsCfg2
+			cfg3 = mcp8mHz40kBpsCfg3
+		case CAN50kBps:
+			cfg1 = mcp8mHz50kBpsCfg1
+			cfg2 = mcp8mHz50kBpsCfg2
+			cfg3 = mcp8mHz50kBpsCfg3
+		case CAN80kBps:
+			cfg1 = mcp8mHz80kBpsCfg1
+			cfg2 = mcp8mHz80kBpsCfg2
+			cfg3 = mcp8mHz80kBpsCfg3
+		case CAN100kBps:
+			cfg1 = mcp8mHz100kBpsCfg1
+			cfg2 = mcp8mHz100kBpsCfg2
+			cfg3 = mcp8mHz100kBpsCfg3
+		case CAN125kBps:
+			cfg1 = mcp8mHz125kBpsCfg1
+			cfg2 = mcp8mHz125kBpsCfg2
+			cfg3 = mcp8mHz125kBpsCfg3
+		case CAN200kBps:
+			cfg1 = mcp8mHz200kBpsCfg1
+			cfg2 = mcp8mHz200kBpsCfg2
+			cfg3 = mcp8mHz200kBpsCfg3
+		case CAN250kBps:
+			cfg1 = mcp8mHz250kBpsCfg1
+			cfg2 = mcp8mHz250kBpsCfg2
+			cfg3 = mcp8mHz250kBpsCfg3
 		case CAN500kBps:
 			cfg1 = mcp8mHz500kBpsCfg1
 			cfg2 = mcp8mHz500kBpsCfg2

netif/example_test.go

@@ -0,0 +1,97 @@
+package netif
+
+import (
+	"net"
+	"time"
+)
+
+func AutoProbe(timeout time.Duration) (Stack, error) {
+	// This function automatically gets the first available network device
+	// and returns a stack for it.
+	// It is intended to be used by the user as a convenience function.
+	// Will be guarded by build tags and specific for whether the device
+	// is a StackWifi, InterfaceEthPollWifi or InterfaceEthPoller.
+	return nil, nil
+}
+
+func ProbeStackWifi() StackWifi {
+	return nil
+}
+func ProbeEthPollWifi() InterfaceEthPollWifi {
+	return nil
+}
+func ProbeEthPoller() InterfaceEthPoller {
+	return nil
+}
+
+func StackForEthPoll(dev InterfaceEthPoller) Stack {
+	// Use seqs to generate a stack.
+	return nil
+}
+
+// OSI layer 4 enabled WIFI chip. i.e.: ESP32
+func ExampleProbeStackWifi() {
+	dev := ProbeStackWifi()
+	wifiparams := WifiParams{
+		SSID:        "myssid",
+		ConnectMode: ConnectModeSTA,
+		Passphrase:  "mypassphrase",
+		Auth:        AuthTypeWPA2,
+		CountryCode: "US",
+	}
+	err := StartWifiAutoconnect(dev, WifiAutoconnectParams{
+		WifiParams: wifiparams,
+	})
+	if err != nil {
+		panic(err)
+	}
+	for dev.NetFlags()&net.FlagRunning == 0 {
+		time.Sleep(100 * time.Millisecond)
+	}
+	UseStack(dev)
+	net.Dial("tcp", "192.168.1.1:33")
+}
+
+// Simplest case, OSI layer 2 enabled WIFI chip, i.e: CYW43439
+func ExampleProbeEthPollWifi() {
+	dev := ProbeEthPollWifi()
+	wifiparams := WifiParams{
+		SSID:        "myssid",
+		ConnectMode: ConnectModeSTA,
+		Passphrase:  "mypassphrase",
+		Auth:        AuthTypeWPA2,
+		CountryCode: "US",
+	}
+	err := StartWifiAutoconnect(dev, WifiAutoconnectParams{
+		WifiParams: wifiparams,
+	})
+	if err != nil {
+		panic(err)
+	}
+	for dev.NetFlags()&net.FlagRunning == 0 {
+		time.Sleep(100 * time.Millisecond)
+	}
+	stack := StackForEthPoll(dev)
+	UseStack(stack)
+	net.Dial("tcp", "192.168.1.1:33")
+}
+
+// OSI level 2 chip with wired connection, i.e. ENC28J60.
+func ExampleProbeEthPoller() {
+	dev := ProbeEthPoller()
+	if dev.NetFlags()&net.FlagRunning == 0 {
+		panic("ethernet not connected")
+	}
+	stack := StackForEthPoll(dev)
+	UseStack(stack)
+	net.Dial("tcp", "192.168.1.1:33")
+}
+
+func ExampleAutoProbe() {
+	stack, err := AutoProbe(10 * time.Second)
+	if err != nil {
+		panic(err)
+	}
+	UseStack(stack)
+	net.Dial("tcp", "192.168.1.1:33")
+}

netif/netif.go

@@ -0,0 +1,211 @@
+package netif
+
+import (
+	"context"
+	"errors"
+	"net"
+	"net/netip"
+	"time"
+	_ "unsafe"
+)
+
+//go:linkname UseStack net.useNetdev
+func UseStack(stack Stack)
+
+// Socket errors.
+var (
+	ErrProtocolNotSupported = errors.New("socket protocol/type not supported")
+)
+
+// Wifi errors.
+var (
+	ErrAuthFailure     = errors.New("wifi authentication failure")
+	ErrAuthUnsupported = errors.New("wifi authorization type not supported")
+)
+
+const (
+	_AF_INET       = 0x2
+	_SOCK_STREAM   = 0x1
+	_SOCK_DGRAM    = 0x2
+	_SOL_SOCKET    = 0x1
+	_SO_KEEPALIVE  = 0x9
+	_SOL_TCP       = 0x6
+	_TCP_KEEPINTVL = 0x5
+	_IPPROTO_TCP   = 0x6
+	_IPPROTO_UDP   = 0x11
+	// Made up, not a real IP protocol number.  This is used to create a
+	// TLS socket on the device, assuming the device supports mbed TLS.
+	_IPPROTO_TLS = 0xFE
+	_F_SETFL     = 0x4
+)
+
+// Interface is the minimum interface that need be implemented by any network
+// device driver and is based on [net.Interface].
+type Interface interface {
+	// HardwareAddr6 returns the device's 6-byte [MAC address].
+	//
+	// [MAC address]: https://en.wikipedia.org/wiki/MAC_address
+	HardwareAddr6() ([6]byte, error)
+	// NetFlags returns the net.Flag values for the interface. It includes state of connection.
+	NetFlags() net.Flags
+	// MTU returns the maximum transmission unit size.
+	MTU() int
+	// Notify to register callback for network events. May not be supported for certain devices.
+	NetNotify(cb func(Event)) error
+}
+
+// InterfaceEthPoller is implemented by devices that send/receive ethernet packets.
+type InterfaceEthPoller interface {
+	Interface
+	// SendEth sends an Ethernet packet
+	SendEth(pkt []byte) error
+	// RecvEthHandle sets recieve Ethernet packet callback function
+	RecvEthHandle(func(pkt []byte) error)
+	// PollOne tries to receive one Ethernet packet and returns true if one was
+	PollOne() (bool, error)
+}
+
+// InterfaceWifi is implemented by a interface device that has the capacity
+// to connect to wifi networks.
+type InterfaceWifi interface {
+	Interface
+	// Connect device to network
+	NetConnect(params WifiParams) error
+	// Disconnect device from network
+	NetDisconnect()
+}
+
+// InterfaceEthPollWifi is implemented by devices that connect to wifi networks
+// and send/receive ethernet packets (OSI level 2).
+type InterfaceEthPollWifi interface {
+	InterfaceWifi
+	InterfaceEthPoller
+}
+
+type Stack interface {
+	// GetHostByName returns the IP address of either a hostname or IPv4
+	// address in standard dot notation
+	// GetHostByName(name string) (netip.Addr, error)
+
+	// Addr returns IP address assigned to the interface, either by
+	// DHCP or statically
+	Addr() (netip.Addr, error)
+
+	// Berkely Sockets-like interface, Go-ified.  See man page for socket(2), etc.
+	Socket(domain int, stype int, protocol int) (int, error)
+	Bind(sockfd int, ip netip.AddrPort) error
+	Connect(sockfd int, host string, ip netip.AddrPort) error
+	Listen(sockfd int, backlog int) error
+	Accept(sockfd int) (int, netip.AddrPort, error)
+	Send(sockfd int, buf []byte, flags int, deadline time.Time) (int, error)
+	Recv(sockfd int, buf []byte, flags int, deadline time.Time) (int, error)
+	Close(sockfd int) error
+	SetSockOpt(sockfd int, level int, opt int, value interface{}) error
+}
+
+// Resolver is implemented by DNS resolvers, notably Go's [net.DefaultResolver].
+type Resolver interface {
+	// LookupNetIP looks up host using the local resolver.
+	// It returns a slice of that host's IP addresses of the type specified by
+	// network.
+	// The network must be one of "ip", "ip4" or "ip6".
+	LookupNetIP(ctx context.Context, network, host string) ([]netip.Addr, error)
+}
+
+// StackWifi is returned by `Probe` function for devices that communicate
+// on the OSI level 4 (transport) layer.
+type StackWifi interface {
+	InterfaceWifi
+	Stack
+}
+
+type WifiParams struct {
+	// Connect mode
+	ConnectMode ConnectMode
+
+	// SSID of Wifi AP
+	SSID string
+
+	// Passphrase of Wifi AP
+	Passphrase string
+
+	// Wifi authorization type
+	Auth AuthType
+
+	// Wifi country code as two-char string.  E.g. "XX" for world-wide,
+	// "US" for USA, etc.
+	CountryCode string
+}
+
+type Event uint8
+
+// Network events
+const (
+	// The device's network connection is now UP
+	EventNetUp Event = iota
+	// The device's network connection is now DOWN
+	EventNetDown
+)
+
+type ConnectMode uint8
+
+// Connect modes
+const (
+	ConnectModeSTA = iota // Connect as Wifi station (default)
+	ConnectModeAP         // Connect as Wifi Access Point
+)
+
+type AuthType uint8
+
+// Wifi authorization types.  Used when setting up an access point, or
+// connecting to an access point
+const (
+	AuthTypeWPA2      = iota // WPA2 authorization (default)
+	AuthTypeOpen             // No authorization required (open)
+	AuthTypeWPA              // WPA authorization
+	AuthTypeWPA2Mixed        // WPA2/WPA mixed authorization
+)
+
+type WifiAutoconnectParams struct {
+	WifiParams
+
+	// Retries is how many attempts to connect before returning with a
+	// "Connect failed" error.  Zero means infinite retries.
+	// Retries int // Probably should be implemented as a function
+
+	// Timeout duration for each connection attempt.  The default zero
+	// value means 10sec.
+	ConnectTimeout time.Duration
+
+	// Watchdog ticker duration.  On tick, the watchdog will check for
+	// downed connection or hardware fault and try to recover the
+	// connection.  Set to zero to disable watchodog.
+	WatchdogTimeout time.Duration
+}
+
+func StartWifiAutoconnect(dev InterfaceWifi, cfg WifiAutoconnectParams) error {
+	if dev == nil {
+		return errors.New("nil device")
+	}
+	go func() {
+		// Wifi autoconnect algorithm in one place,
+		// no need to implement for every single netdever.
+	RECONNECT:
+		for i := 0; i < 4; i++ {
+			err := dev.NetConnect(cfg.WifiParams)
+			if err != nil {
+				time.Sleep(cfg.ConnectTimeout)
+				goto RECONNECT
+			}
+			// Once connected reset the retry counter.
+			i = 0
+			for cfg.WatchdogTimeout != 0 {
+				time.Sleep(cfg.WatchdogTimeout)
+				if dev.NetFlags()&net.FlagRunning == 0 {
+					goto RECONNECT
+				}
+			}
+		}
+	}()
+	return nil
+}