7a7235f83b
move netdev interface to use net/netip for IP addr/ports
2023-12-06 20:09:39 +01:00
3089bf8b1b
net: updates/cleanup/docs for net, netdev, and netlink
2023-12-06 20:09:39 +01:00
8238f96319
move netdev and netlink into their own packages and out of drivers
...
This moves the netdev/netlink namespace out of drivers and into their
own packages. Also, defines netdev and netlink as L3/L4 and L2 OSI
layers, respectively. Move some L3 functionality from netlink to
netdev (GetIPAddr).
For netlink, add ConnectParams for NetConnect to pass in L2 connection
parameters (ssid, pass, auth_type, etc). Also adds connection mode
(STA, AP, etc).
For netlink, add SendEth and RecvEthFunc funcs to handle L2 send/recv of
Ethernet pkts.
2023-12-06 20:09:39 +01:00
4bf631a7e3
s/ConnectTimeo/ConnectTimeout, s/WatchdogTimeo/WatchdogTimeout/
2023-12-06 20:09:39 +01:00
3c4df6e811
wifinina: add 'unknown failure' reason code for AP connect
2023-12-06 20:09:39 +01:00
255c639ad4
wifinina: add ResetIsHigh cfg switch for MKR 1010 (copied from #561 )
2023-12-06 20:09:39 +01:00
276feecc20
Add network device driver model, netdev
2023-12-06 20:09:39 +01:00
422051d822
wifinina: add ResetIsHigh to control the behavior of the RESET pin for boards like the Arduino MKR 1010
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-05-18 21:25:33 +02:00
5f25a4f6be
wifinina: small timing adjustments in Configure() to better ensure device reset
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-05-18 21:25:33 +02:00
9955e09466
wifinina: only add generated strings when using wifidebug tag
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-05-14 23:16:40 +02:00
bc9177726d
wifinina: add generated strings, improved debugging system and messages
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-05-14 23:16:40 +02:00
0ec887c9d8
wifinina: add support for http server ( #480 )
...
* wifinina: add support for http server
This adds http.ListenAndServe() implementation for wifinina. Included
is an example webserver, basically copied from the rtl8720dn/webserver.
Tested on Arduino Nano RP2040 Connect. Also tried testing on Arduino
Nano33 IoT but test panics with "out of memory". There's only 32K of
SRAM on the Nano33, vs 264K on the rp2040 Connect.
2022-11-14 22:24:15 +01:00
1bb1b621c6
all: correct go fmt
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2022-09-25 13:23:16 +02:00
1c038f5183
wifinina: add mutex to prevent communication race problems
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2022-06-11 10:59:41 +02:00
f7dce6ae22
wifinina: correct sendParamStr to handle empty strings, such as when connecting to an unsecured access point.
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2022-01-26 23:05:50 +01:00
941c1c9057
wifi/espat, rtl8720dn, wifinina, net: modify to use Adapter interface
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2022-01-24 13:24:39 +01:00
d8c813d515
wifi/espat, rtl8720dn, wifinina: move towards standard common interface for wifi adaptors
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2022-01-24 13:24:39 +01:00
0f9b9d873b
wifinina: avoid busy wait
2021-12-10 12:15:56 +01:00
334ed57373
wifinina: control nina pins, for example leds
2021-11-12 15:32:21 +01:00
3fe3fc64e4
wifinina: fix warnings
2021-09-19 13:05:38 +02:00
feb1c63656
Instructions on how to flash nina-fw on nano rp2040 connect w/o Arduino IDE
2021-09-05 11:57:07 +02:00
0691ed5205
wifinina: nina-fw update docs
2021-09-05 11:57:07 +02:00
9adbde99a2
wifinina: avoid fmt package
2021-05-28 18:09:29 +02:00
a09ec31e7a
Fix RSSI command for WiFiNINA
...
+ Print current SSID
+ Wait for correct time before printing it out
+ Cleanup
2021-05-27 08:00:13 +02:00
351700e48d
wifinina: add information about Adafruit boards with ESP32 wifi coprocessors, and modify examples to remove code that was both not being used, and also prevented many Adafruit boards from being able to be targeted by the examples
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2021-05-12 09:13:09 +02:00
cbcb62af01
wifinina: update docs to simplify the nina-fw update process
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2021-05-12 09:13:09 +02:00
2a48b5c25d
wifinina: fix getMACAddress and getTime
...
Tested against Adafruit AirLift (compatibile variant of wifinina)
2021-05-12 09:11:18 +02:00
67b8a341a6
Make TLS work over WiFiNINA
...
Verified on Arduino Nano33 IoT and nina fw v1.4.5
2021-05-11 10:59:52 +02:00
b869d27170
remove debug flag and remove unnecessary padding call
...
(cherry picked from commit 9d3e63232b
2021-05-11 10:59:52 +02:00
107932a201
fix padding and implement missing functions
...
(cherry picked from commit 0aa0bde76e
2021-05-11 10:59:52 +02:00
42a907035b
spi: incorporate change from GH issue feedback
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2020-12-15 06:08:59 +01:00
46c9ba9595
spi: remove machine.SPI and replace with drivers.SPI interface for almost all SPI drivers
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2020-12-15 06:08:59 +01:00
74c9ff4c76
all: changeover to eliminate all direct use of master/slave terminology
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2020-07-30 12:03:09 +02:00
511a3282b7
Added UDP support
2020-06-21 16:21:06 +02:00
d61fe99ef1
fix typo on StartScanNetworks
2020-02-26 19:55:12 +01:00
38076352eb
wifinina: update docs and add Dockerfile to build firmware
...
Signed-off-by: Ron Evans <ron@hybridgroup.com >
2019-12-29 17:45:41 +01:00
086415605e
wifinina: update docs and info on how to install WiFiNINA driver
...
Signed-off-by: Ron Evans <ron@hybridgroup.com >
2019-12-26 16:34:35 +01:00
e80a22d0ba
Client driver for WiFiNINA firmware ( #98 )
...
* wifinina: implementation of WiFiNINA driver, including:
- TCP client example is working
- reading sockets and mqtt working
- switched over to common net package also used by espat package
- smoke tests and updated README for wifinina
2019-12-22 10:25:10 +01:00
Scott Feldman
deadprogram
Yurii Soldak
Kenneth Bell
Tobias Theel
BCG
Daniel Esteban