sx126x: Driver for Semtech sx126x radio modules and optional RF Switch.

This first version of the driver has been tested with STM32WL SoC,
	which embeddeds SX1262 radio on the same die.

examples/sx126x/rfswitch/gnse.go

@@ -0,0 +1,61 @@
+//go:build gnse
+// +build gnse
+
+/*
+ Generic Node Sensor Edition
+ RFSwitch
+
+ Disable Switch   :  PB8=OFF PA0=OFF  PA1=OFF
+ Enable RX        :  PB8=ON  PA0=ON   PA1=OFF
+ Enable TX RFO LP :  PB8=ON  PA0=ON   PA1=ON
+ Enable TX RFO HP :  PB8=ON  PA0=OFF  PA1=ON
+*/
+package rfswitch
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/sx126x"
+)
+
+type CustomSwitch struct {
+}
+
+var (
+	rfstate int
+)
+
+func (s CustomSwitch) InitRFSwitch() {
+	machine.RF_FE_CTRL1.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.RF_FE_CTRL2.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.RF_FE_CTRL3.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	rfstate = -1 //Unknown
+}
+
+func (s CustomSwitch) SetRfSwitchMode(mode int) error {
+	if mode == rfstate {
+		return nil
+	}
+
+	switch mode {
+
+	case sx126x.RFSWITCH_TX_HP:
+		machine.RF_FE_CTRL1.Set(false)
+		machine.RF_FE_CTRL2.Set(true)
+		machine.RF_FE_CTRL3.Set(true)
+
+	case sx126x.RFSWITCH_TX_LP:
+		machine.RF_FE_CTRL1.Set(true)
+		machine.RF_FE_CTRL2.Set(true)
+		machine.RF_FE_CTRL3.Set(true)
+
+	case sx126x.RFSWITCH_RX:
+		machine.RF_FE_CTRL1.Set(true)
+		machine.RF_FE_CTRL2.Set(false)
+		machine.RF_FE_CTRL3.Set(true)
+	}
+
+	rfstate = mode
+
+	return nil
+}

examples/sx126x/rfswitch/lorae5.go

@@ -0,0 +1,43 @@
+//go:build lorae5
+// +build lorae5
+
+package radio
+
+/*
+/!\ LoRa-E5 module ONLY transmits through RFO_HP:
+
+	Receive: PA4=1, PA5=0
+	Transmit(high output power, SMPS mode): PA4=0, PA5=1
+
+*/
+
+import (
+	"errors"
+	"machine"
+
+	"tinygo.org/x/drivers/sx126x"
+)
+
+type CustomSwitch struct {
+}
+
+func (s CustomSwitch) InitRFSwitch() {
+	machine.PA4.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.PB5.Configure(machine.PinConfig{Mode: machine.PinOutput})
+}
+
+func (s CustomSwitch) SetRfSwitchMode(mode int) error {
+	switch mode {
+
+	case sx126x.RFSWITCH_RX:
+		machine.PA4.Set(true)
+		machine.PB5.Set(false)
+	case sx126x.RFSWITCH_TX_LP:
+		errors.New("RFSWITCH_TX_LP not supported ")
+	case sx126x.RFSWITCH_TX_HP:
+		machine.PA4.Set(false)
+		machine.PB5.Set(true)
+
+	}
+	return nil
+}

examples/sx126x/rfswitch/wl55jc.go

@@ -0,0 +1,55 @@
+//go:build nucleowl55jc
+// +build nucleowl55jc
+
+/*
+ Nucleo WL55JC1
+ RFSwitch
+
++-----------+---------+------------+------------+
+|           | FE_CTRL1 |  FE_CTRL2 |   FE_CTRL3 |
+|           |   (PC4)  |   (PC5)   |     (PC3)  |
++-----------+----------+-----------+------------+
+|  TX_HP    |   LOW    |   HIGH    |    HIGH    |
+|  TX_LP    |   HIGH   |   HIGH    |    HIGH    |
+|  RX       |   HIGH   |   LOW     |    HIGH    |
++-----------+----------+-----------+------------+
+*/
+package rfswitch
+
+import (
+	"machine"
+
+	"tinygo.org/x/drivers/sx126x"
+)
+
+type CustomSwitch struct {
+}
+
+func (s CustomSwitch) InitRFSwitch() {
+	machine.PC4.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.PC5.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	machine.PC3.Configure(machine.PinConfig{Mode: machine.PinOutput})
+}
+
+func (s CustomSwitch) SetRfSwitchMode(mode int) error {
+	switch mode {
+
+	case sx126x.RFSWITCH_TX_HP:
+		machine.PC4.Set(false)
+		machine.PC5.Set(true)
+		machine.PC3.Set(true)
+
+	case sx126x.RFSWITCH_TX_LP:
+		machine.PC4.Set(true)
+		machine.PC5.Set(true)
+		machine.PC3.Set(true)
+
+	case sx126x.RFSWITCH_RX:
+		machine.PC4.Set(true)
+		machine.PC5.Set(false)
+		machine.PC3.Set(true)
+
+	}
+	return nil
+
+}