wifinina: control nina pins, for example leds

examples/wifinina/pins/main.go

@@ -0,0 +1,91 @@
+//go:build nano_rp2040
+// +build nano_rp2040
+
+// This examples shows how to control RGB LED connected to
+// NINA-W102 chip on Arduino Nano RP2040 Connect board
+// Built-in LED code added for API comparison
+
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/wifinina"
+)
+
+const (
+	LED = machine.LED
+
+	// Arduino Nano RP2040 Connect board RGB LED pins
+	// See https://docs.arduino.cc/static/3525d638b5c76a2d19588d6b41cd02a0/ABX00053-full-pinout.pdf
+	LED_R wifinina.Pin = 27
+	LED_G wifinina.Pin = 25
+	LED_B wifinina.Pin = 26
+)
+
+var (
+
+	// these are the default pins for the Arduino Nano-RP2040 Connect
+	spi = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	device *wifinina.Device
+)
+
+func setup() {
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	device = wifinina.New(spi,
+		machine.NINA_CS,
+		machine.NINA_ACK,
+		machine.NINA_GPIO0,
+		machine.NINA_RESETN)
+	device.Configure()
+
+	time.Sleep(time.Second)
+
+	LED.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	LED_R.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+	LED_G.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+	LED_B.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+}
+
+func main() {
+
+	setup()
+
+	LED.Low()    // OFF
+	LED_R.High() // OFF
+	LED_G.High() // OFF
+	LED_B.High() // OFF
+
+	go func() {
+		for {
+			LED.Low()
+			time.Sleep(time.Second)
+			LED.High()
+			time.Sleep(time.Second)
+		}
+	}()
+
+	for {
+		LED_R.Low() // ON
+		time.Sleep(time.Second)
+		LED_R.High() // OFF
+		LED_G.Low()  // ON
+		time.Sleep(time.Second)
+		LED_G.High() // OFF
+		LED_B.Low()  // ON
+		time.Sleep(time.Second)
+		LED_B.High() // OFF
+	}
+
+}