diff --git a/examples/wifinina/pins/main.go b/examples/wifinina/pins/main.go
new file mode 100644
index 0000000..378a528
--- /dev/null
+++ b/examples/wifinina/pins/main.go
@@ -0,0 +1,91 @@
+//go:build nano_rp2040
+// +build nano_rp2040
+
+// This examples shows how to control RGB LED connected to
+// NINA-W102 chip on Arduino Nano RP2040 Connect board
+// Built-in LED code added for API comparison
+
+package main
+
+import (
+	"machine"
+	"time"
+
+	"tinygo.org/x/drivers/wifinina"
+)
+
+const (
+	LED = machine.LED
+
+	// Arduino Nano RP2040 Connect board RGB LED pins
+	// See https://docs.arduino.cc/static/3525d638b5c76a2d19588d6b41cd02a0/ABX00053-full-pinout.pdf
+	LED_R wifinina.Pin = 27
+	LED_G wifinina.Pin = 25
+	LED_B wifinina.Pin = 26
+)
+
+var (
+
+	// these are the default pins for the Arduino Nano-RP2040 Connect
+	spi = machine.NINA_SPI
+
+	// this is the ESP chip that has the WIFININA firmware flashed on it
+	device *wifinina.Device
+)
+
+func setup() {
+
+	// Configure SPI for 8Mhz, Mode 0, MSB First
+	spi.Configure(machine.SPIConfig{
+		Frequency: 8 * 1e6,
+		SDO:       machine.NINA_SDO,
+		SDI:       machine.NINA_SDI,
+		SCK:       machine.NINA_SCK,
+	})
+
+	device = wifinina.New(spi,
+		machine.NINA_CS,
+		machine.NINA_ACK,
+		machine.NINA_GPIO0,
+		machine.NINA_RESETN)
+	device.Configure()
+
+	time.Sleep(time.Second)
+
+	LED.Configure(machine.PinConfig{Mode: machine.PinOutput})
+	LED_R.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+	LED_G.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+	LED_B.Configure(wifinina.PinConfig{Mode: wifinina.PinOutput})
+}
+
+func main() {
+
+	setup()
+
+	LED.Low()    // OFF
+	LED_R.High() // OFF
+	LED_G.High() // OFF
+	LED_B.High() // OFF
+
+	go func() {
+		for {
+			LED.Low()
+			time.Sleep(time.Second)
+			LED.High()
+			time.Sleep(time.Second)
+		}
+	}()
+
+	for {
+		LED_R.Low() // ON
+		time.Sleep(time.Second)
+		LED_R.High() // OFF
+		LED_G.Low()  // ON
+		time.Sleep(time.Second)
+		LED_G.High() // OFF
+		LED_B.Low()  // ON
+		time.Sleep(time.Second)
+		LED_B.High() // OFF
+	}
+
+}
diff --git a/wifinina/pins.go b/wifinina/pins.go
new file mode 100644
index 0000000..a1afbcb
--- /dev/null
+++ b/wifinina/pins.go
@@ -0,0 +1,65 @@
+package wifinina
+
+import "errors"
+
+// Mimics machine package's pin control
+//
+// NB! These are NINA chip pins, not main unit pins.
+//
+// Digital pin values and modes taken from
+// https://github.com/arduino/nina-fw/blob/master/arduino/cores/esp32/wiring_digital.h
+
+type Pin uint8
+
+const (
+	PinLow uint8 = iota
+	PinHigh
+)
+
+type PinMode uint8
+
+const (
+	PinInput PinMode = iota
+	PinOutput
+	PinInputPullup
+)
+
+type PinConfig struct {
+	Mode PinMode
+}
+
+var (
+	ErrPinNoDevice = errors.New("wifinina pin: device not set")
+)
+
+var pinDevice *Device
+
+func pinUseDevice(d *Device) {
+	pinDevice = d
+}
+
+func (p Pin) Configure(config PinConfig) error {
+	if pinDevice == nil {
+		return ErrPinNoDevice
+	}
+	return pinDevice.PinMode(uint8(p), uint8(config.Mode))
+}
+
+func (p Pin) Set(high bool) error {
+	if pinDevice == nil {
+		return ErrPinNoDevice
+	}
+	value := PinLow
+	if high {
+		value = PinHigh
+	}
+	return pinDevice.DigitalWrite(uint8(p), value)
+}
+
+func (p Pin) High() error {
+	return p.Set(true)
+}
+
+func (p Pin) Low() error {
+	return p.Set(false)
+}
diff --git a/wifinina/wifinina.go b/wifinina/wifinina.go
index 04ed371..290f1b0 100644
--- a/wifinina/wifinina.go
+++ b/wifinina/wifinina.go
@@ -297,6 +297,7 @@ func New(bus drivers.SPI, csPin, ackPin, gpio0Pin, resetPin machine.Pin) *Device
 func (d *Device) Configure() {
 
 	net.UseDriver(d.NewDriver())
+	pinUseDevice(d)
 
 	d.CS.Configure(machine.PinConfig{Mode: machine.PinOutput})
 	d.ACK.Configure(machine.PinConfig{Mode: machine.PinInput})
@@ -689,6 +690,23 @@ func (d *Device) StartScanNetworks() (uint8, error) {
 	return d.getUint8(d.req0(CmdStartScanNetworks))
 }
 
+func (d *Device) PinMode(pin uint8, mode uint8) error {
+	_, err := d.req2Uint8(CmdSetPinMode, pin, mode)
+	return err
+}
+
+func (d *Device) DigitalWrite(pin uint8, value uint8) error {
+	_, err := d.req2Uint8(CmdSetDigitalWrite, pin, value)
+	return err
+}
+
+func (d *Device) AnalogWrite(pin uint8, value uint8) error {
+	_, err := d.req2Uint8(CmdSetAnalogWrite, pin, value)
+	return err
+}
+
+// ------------- End of public device interface ----------------------------
+
 func (d *Device) getString(l uint8, err error) (string, error) {
 	if err != nil {
 		return "", err
@@ -773,6 +791,14 @@ func (d *Device) reqUint8(cmd uint8, data uint8) (l uint8, err error) {
 	return d.waitRspCmd1(cmd)
 }
 
+// req2Uint8 sends a command to the device with two uint8 parameters
+func (d *Device) req2Uint8(cmd, p1, p2 uint8) (l uint8, err error) {
+	if err := d.sendCmdPadded2(cmd, p1, p2); err != nil {
+		return 0, err
+	}
+	return d.waitRspCmd1(cmd)
+}
+
 // reqStr sends a command to the device with a single string parameter
 func (d *Device) reqStr(cmd uint8, p1 string) (uint8, error) {
 	if err := d.sendCmdStr(cmd, p1); err != nil {
@@ -834,6 +860,18 @@ func (d *Device) sendCmdPadded1(cmd uint8, data uint8) error {
 	return nil
 }
 
+func (d *Device) sendCmdPadded2(cmd, data1, data2 uint8) error {
+	defer d.spiChipDeselect()
+	if err := d.waitForChipSelect(); err != nil {
+		return err
+	}
+	l := d.sendCmd(cmd, 1)
+	l += d.sendParam8(data1, false)
+	l += d.sendParam8(data2, true)
+	d.SPI.Transfer(dummyData)
+	return nil
+}
+
 func (d *Device) sendCmdStr(cmd uint8, p1 string) (err error) {
 	defer d.spiChipDeselect()
 	if err := d.waitForChipSelect(); err != nil {