Increase REC BW Option till 1Mhz Capture App (#1352)

* Increase REC BW Option till 1Mhz Capture App

* Format issues

* miss type correction

* format issues

firmware/application/apps/capture_app.cpp

@@ -60,25 +60,28 @@ CaptureAppView::CaptureAppView(NavigationView& nav)
     };
 
     freqman_set_bandwidth_option(SPEC_MODULATION, option_bandwidth);
-    option_bandwidth.on_change = [this](size_t, uint32_t base_rate) {
-        /* base_rate is used for FFT calculation and display LCD, and also in recording writing SD Card rate. */
+    option_bandwidth.on_change = [this](size_t, uint32_t bandwidth) {
+        /* Nyquist would imply a sample rate of 2x bandwidth, but because the ADC
+         * provides 2 values (I,Q), the sample_rate is equal to bandwidth here. */
+        auto sample_rate = bandwidth;
+
+        /* base_rate (bandwidth) is used for FFT calculation and display LCD, and also in recording writing SD Card rate. */
         /* ex. sampling_rate values, 4Mhz, when recording 500 kHz (BW) and fs 8 Mhz, when selected 1 Mhz BW ... */
-        /* ex. recording 500kHz BW to .C16 file, base_rate clock 500kHz x2(I,Q) x 2 bytes (int signed) =2MB/sec rate SD Card  */
-
-        // For lower bandwidths, (12k5, 16k, 20k), increase the oversample rate to get a higher sample rate.
-        OversampleRate oversample_rate = base_rate >= 25'000 ? OversampleRate::Rate8x : OversampleRate::Rate16x;
-
-        // HackRF suggests a minimum sample rate of 2M.
-        // Oversampling helps get to higher sample rates when recording lower bandwidths.
-        uint32_t sampling_rate = toUType(oversample_rate) * base_rate;
-
-        // Set up proper anti aliasing BPF bandwidth in MAX2837 before ADC sampling according to the new added BW Options.
-        auto anti_alias_baseband_bandwidth_filter = filter_bandwidth_for_sampling_rate(sampling_rate);
+        /* ex. recording 500kHz BW to .C16 file, base_rate clock 500kHz x2(I,Q) x 2 bytes (int signed) =2MB/sec rate SD Card. */
 
         waterfall.stop();
-        record_view.set_sampling_rate(sampling_rate, oversample_rate);  // NB: Actually updates the baseband.
-        receiver_model.set_sampling_rate(sampling_rate);
-        receiver_model.set_baseband_bandwidth(anti_alias_baseband_bandwidth_filter);
+
+        // record_view determines the correct oversampling to apply and returns the actual sample rate.
+        // NB: record_view is what actually updates proc_capture baseband settings.
+        auto actual_sample_rate = record_view.set_sampling_rate(sample_rate);
+
+        // Update the radio model with the actual sampling rate.
+        receiver_model.set_sampling_rate(actual_sample_rate);
+
+        // Get suitable anti-aliasing BPF bandwidth for MAX2837 given the actual sample rate.
+        auto anti_alias_filter_bandwidth = filter_bandwidth_for_sampling_rate(actual_sample_rate);
+        receiver_model.set_baseband_bandwidth(anti_alias_filter_bandwidth);
+
         waterfall.start();
     };
 

firmware/application/apps/replay_app.cpp

@@ -124,7 +124,7 @@ void ReplayAppView::start() {
 
     if (reader) {
         button_play.set_bitmap(&bitmap_stop);
-        baseband::set_sample_rate(sample_rate * 8);
+        baseband::set_sample_rate(sample_rate, OversampleRate::x8);
 
         replay_thread = std::make_unique<ReplayThread>(
             std::move(reader),
@@ -136,7 +136,7 @@ void ReplayAppView::start() {
             });
     }
 
-    transmitter_model.set_sampling_rate(sample_rate * 8);
+    transmitter_model.set_sampling_rate(sample_rate * toUType(OversampleRate::x8));
     transmitter_model.set_baseband_bandwidth(baseband_bandwidth);
     transmitter_model.enable();
 

firmware/application/apps/ui_playlist.cpp

@@ -24,18 +24,18 @@
 
 #include "ui_playlist.hpp"
 
+#include "baseband_api.hpp"
 #include "convert.hpp"
 #include "file_reader.hpp"
 #include "io_file.hpp"
 #include "io_convert.hpp"
-
+#include "oversample.hpp"
+#include "portapack.hpp"
+#include "portapack_persistent_memory.hpp"
 #include "string_format.hpp"
 #include "ui_fileman.hpp"
 #include "utility.hpp"
 
-#include "baseband_api.hpp"
-#include "portapack.hpp"
-#include "portapack_persistent_memory.hpp"
 #include <unistd.h>
 #include <fstream>
 
@@ -266,17 +266,16 @@ void PlaylistView::send_current_track() {
         return;
     }
 
-    // ReplayThread starts immediately on construction so
-    // these need to be set before creating the ReplayThread.
+    // Update the sample rate in proc_replay baseband.
+    baseband::set_sample_rate(current()->metadata.sample_rate,
+                              get_oversample_rate(current()->metadata.sample_rate));
+
+    // ReplayThread starts immediately on construction; must be set before creating.
     transmitter_model.set_target_frequency(current()->metadata.center_frequency);
-    transmitter_model.set_sampling_rate(current()->metadata.sample_rate * 8);
+    transmitter_model.set_sampling_rate(get_actual_sample_rate(current()->metadata.sample_rate));
     transmitter_model.set_baseband_bandwidth(baseband_bandwidth);
     transmitter_model.enable();
 
-    // Set baseband sample rate too for waterfall to be correct.
-    // TODO: Why doesn't the transmitter_model just handle this?
-    baseband::set_sample_rate(transmitter_model.sampling_rate());
-
     // Reset the transmit progress bar.
     progressbar_transmit.set_value(0);
 

firmware/application/apps/ui_recon.cpp

@@ -859,18 +859,12 @@ void ReconView::on_statistics_update(const ChannelStatistics& statistics) {
     uint32_t local_recon_lock_duration = recon_lock_duration;
 
     chrono_end = chTimeNow();
-    if (field_mode.selected_index_value() == SPEC_MODULATION) {
-        time_interval = chrono_end - chrono_start;
-        // capping here to avoid double check a frequency because time_interval is more than exactly 100 by a few units
-        // this is because we are making a measurement and not using a fixed value
-        if (time_interval > 100)
-            time_interval = 100;
-        if (field_lock_wait.value() == 0) {
-            if (time_interval <= 1)             // capping here to avoid freeze because too quick
-                local_recon_lock_duration = 2;  // minimum working tested value
-            else
-                local_recon_lock_duration = time_interval;
-        }
+    time_interval = chrono_end - chrono_start;
+    if (field_lock_wait.value() == 0) {
+        if (time_interval <= 1)             // capping here to avoid freeze because too quick
+            local_recon_lock_duration = 2;  // minimum working tested value
+        else
+            local_recon_lock_duration = time_interval;
     }
     chrono_start = chrono_end;
 
@@ -907,7 +901,7 @@ void ReconView::on_statistics_update(const ChannelStatistics& statistics) {
             if (db > squelch)  // MATCHING LEVEL
             {
                 freq_lock++;
-                timer += time_interval;  // give some more time for next lock
+                timer += local_recon_lock_duration;  // give some more time for next lock
             } else {
                 // continuous, direct cut it if not consecutive match after 1 first match
                 if (recon_match_mode == RECON_MATCH_CONTINUOUS) {
@@ -961,7 +955,7 @@ void ReconView::on_statistics_update(const ChannelStatistics& statistics) {
     }
 
     if (timer != 0) {
-        timer -= time_interval;
+        timer -= local_recon_lock_duration;
         if (timer < 0) {
             timer = 0;
         }
@@ -1234,10 +1228,10 @@ size_t ReconView::change_mode(freqman_index_t new_mod) {
             break;
         case SPEC_MODULATION:
             freqman_set_bandwidth_option(new_mod, field_bw);
-            // bw 200k (0) default
+            // bw 12k5 (0) default
+            field_bw.set_by_value(0);
             baseband::run_image(portapack::spi_flash::image_tag_capture);
             receiver_model.set_modulation(ReceiverModel::Mode::Capture);
-            field_bw.set_by_value(0);
             field_bw.on_change = [this](size_t, OptionsField::value_t sampling_rate) {
                 auto anti_alias_baseband_bandwidth_filter = filter_bandwidth_for_sampling_rate(sampling_rate);
                 record_view->set_sampling_rate(sampling_rate);

firmware/application/baseband_api.cpp

@@ -347,13 +347,8 @@ void spectrum_streaming_stop() {
     send_message(&message);
 }
 
-void set_sample_rate(const uint32_t sample_rate) {
-    SamplerateConfigMessage message{sample_rate};
-    send_message(&message);
-}
-
-void set_oversample_rate(OversampleRate oversample_rate) {
-    OversampleRateConfigMessage message{oversample_rate};
+void set_sample_rate(uint32_t sample_rate, OversampleRate oversample_rate) {
+    SampleRateConfigMessage message{sample_rate, oversample_rate};
     send_message(&message);
 }
 

firmware/application/baseband_api.hpp

@@ -94,8 +94,8 @@ void shutdown();
 void spectrum_streaming_start();
 void spectrum_streaming_stop();
 
-void set_sample_rate(const uint32_t sample_rate);
-void set_oversample_rate(OversampleRate oversample_rate);
+/* NB: sample_rate should be desired rate. Don't pre-scale. */
+void set_sample_rate(uint32_t sample_rate, OversampleRate oversample_rate = OversampleRate::None);
 void capture_start(CaptureConfig* const config);
 void capture_stop();
 void replay_start(ReplayConfig* const config);

firmware/application/freqman_db.cpp

@@ -82,10 +82,11 @@ options_t freqman_bandwidths[4] = {
         {"100k", 100000},
         {"250k", 250000},
         {"500k", 500000}, /* Previous Limit bandwith Option with perfect micro SD write .C16 format operaton.*/
-        {"600k", 600000}, /* That extended option is still possible to record with FW version Mayhem v1.41 (< 2,5MB/sec) */
+        {"600k", 600000}, /* We doubled x2 previous REC BW limit , now extended BW from 600k to 1M with fast enough SD card in C16 or C8 format .*/
         {"650k", 650000},
-        {"750k", 750000}, /* From this BW onwards, the LCD is ok, but the recorded file is decimated, (not real file size) */
-        {"1100k", 1100000},
+        {"750k", 750000},
+        {"1000k", 1000000}, /* New limit bandwith option for recording in C16 (in fast SD card) or in C8 */
+        {"1500k", 1500000}, /* From this BW onwards, the LCD is ok, but M4 CPU is having periodical sample rec dropps, (not real file size, accelerated replay) */
         {"1750k", 1750000},
         {"2000k", 2000000},
         {"2500k", 2500000},

firmware/application/replay_thread.cpp

@@ -80,6 +80,8 @@ uint32_t ReplayThread::run() {
         chThdSleep(100);
     };
 
+    constexpr size_t block_size = 512;
+
     // While empty buffers fifo is not empty...
     while (!buffers.empty()) {
         prefill_buffer = buffers.get_prefill();
@@ -87,10 +89,10 @@ uint32_t ReplayThread::run() {
         if (prefill_buffer == nullptr) {
             buffers.put_app(prefill_buffer);
         } else {
-            size_t blocks = config.read_size / 512;
+            size_t blocks = config.read_size / block_size;
 
             for (size_t c = 0; c < blocks; c++) {
-                auto read_result = reader->read(&((uint8_t*)prefill_buffer->data())[c * 512], 512);
+                auto read_result = reader->read(&((uint8_t*)prefill_buffer->data())[c * block_size], block_size);
                 if (read_result.is_error()) {
                     return READ_ERROR;
                 }

firmware/application/ui/ui_spectrum.cpp

@@ -380,33 +380,38 @@ void WaterfallView::on_audio_spectrum() {
 
 } /* namespace spectrum */
 
+// TODO: Comments below refer to a fixed oversample rate (8x), cleanup.
 uint32_t filter_bandwidth_for_sampling_rate(int32_t sampling_rate) {
-    switch (sampling_rate) {  // Use the var fs (sampling_rate) to set up BPF aprox < fs_max / 2 by Nyquist theorem.
-        case 0 ... 2000000:   // BW Captured range (0 <= 250kHz max)  fs = 8 x 250 kHz.
-            return 1750000;   // Minimum BPF MAX2837 for all those lower BW options.
+    switch (sampling_rate) {   // Use the var fs (sampling_rate) to set up BPF aprox < fs_max / 2 by Nyquist theorem.
+        case 0 ... 2'000'000:  // BW Captured range (0 <= 250kHz max)  fs = 8 x 250 kHz.
+            return 1'750'000;  // Minimum BPF MAX2837 for all those lower BW options.
 
-        case 4000000 ... 6000000:  // BW capture range (500k...750kHz max)  fs_max = 8 x 750kHz = 6Mhz
-                                   // BW 500k...750kHz, ex. 500kHz (fs = 8 x BW = 4Mhz), BW 600kHz (fs = 4,8Mhz), BW 750 kHz (fs = 6Mhz).
-            return 2500000;        // In some IC, MAX2837 appears as 2250000, but both work similarly.
+        case 4'000'000 ... 6'000'000:  // BW capture range (500k...750kHz max)  fs_max = 8 x 750kHz = 6Mhz
+                                       // BW 500k...750kHz, ex. 500kHz (fs = 8 x BW = 4Mhz), BW 600kHz (fs = 4,8Mhz), BW 750 kHz (fs = 6Mhz).
+            return 2'500'000;          // In some IC, MAX2837 appears as 2250000, but both work similarly.
 
-        case 8800000:  // BW capture 1,1Mhz fs = 8 x 1,1Mhz = 8,8Mhz. (1Mhz showed slightly higher noise background).
-            return 3500000;
+        case 8'000'000:        // BW capture 1Mhz fs = 8 x 1Mhz = 8Mhz. (1Mhz showed slightly higher noise background).
+            return 3'500'000;  // some low SD cards, if not showing avg. writting speed >4MB/sec, they will produce sammples drop at REC with 1MB and C16 format.
 
-        case 14000000:  // BW capture 1,75Mhz, fs = 8 x 1,75Mhz = 14Mhz
-                        // Good BPF, good matching, but LCD flickers, refresh rate should be < 20 Hz, reasonable picture.
-            return 5000000;
+        case 12'000'000:  // BW capture 1,5Mhz, fs = 8 x 1,5Mhz = 12Mhz
+                          // Good BPF, good matching, we have some periodical M4 % samples drop.
+            return 5'000'000;
 
-        case 16000000:  // BW capture 2Mhz, fs = 8 x 2Mhz = 16Mhz
-                        // Good BPF, good matching, but LCD flickers, refresh rate should be < 20 Hz, reasonable picture.
-            return 6000000;
+        case 14'000'000:  // BW capture 1,75Mhz, fs = 8 x 1,75Mhz = 14Mhz
+                          // Good BPF, good matching, we have some periodical M4 % samples drop.
+            return 5'000'000;
 
-        case 20000000:  // BW capture 2,5Mhz, fs = 8 x 2,5 Mhz = 20Mhz
-                        // Good BPF, good matching, but LCD flickers, refresh rate should be < 20 Hz, reasonable picture.
-            return 7000000;
+        case 16'000'000:  // BW capture 2Mhz, fs = 8 x 2Mhz = 16Mhz
+                          // Good BPF, good matching, we have some periodical M4 % samples drop.
+            return 6'000'000;
+
+        case 20'000'000:  // BW capture 2,5Mhz, fs = 8 x 2,5 Mhz = 20Mhz
+                          // Good BPF, good matching, we have some periodical M4 % samples drop.
+            return 7'000'000;
 
         default:  // BW capture 2,75Mhz, fs = 8 x 2,75Mhz = 22Mhz max ADC sampling and others.
                   // We tested also 9Mhz FPB slightly too much noise floor, better at 8Mhz.
-            return 8000000;
+            return 8'000'000;
     }
 }
 

firmware/application/ui_record_view.cpp

@@ -30,6 +30,7 @@ using namespace portapack;
 
 #include "baseband_api.hpp"
 #include "metadata_file.hpp"
+#include "oversample.hpp"
 #include "rtc_time.hpp"
 #include "string_format.hpp"
 #include "utility.hpp"
@@ -101,27 +102,28 @@ void RecordView::focus() {
     button_record.focus();
 }
 
-void RecordView::set_sampling_rate(size_t new_sampling_rate, OversampleRate new_oversample_rate) {
-    /* We are changing "REC" icon background to yellow in BW rec Options >600kHz
-        where we are NOT recording full IQ .C16 files (recorded files are decimated ones).
-        Those decimated recorded files, has not the full IQ samples.
-        are ok as recorded spectrum indication, but they should not be used by Replay app.
+uint32_t RecordView::set_sampling_rate(uint32_t new_sampling_rate) {
+    // Determine the oversampling needed (if any) and the actual sampling rate.
+    auto oversample_rate = get_oversample_rate(new_sampling_rate);
+    auto actual_sampling_rate = new_sampling_rate * toUType(oversample_rate);
 
-        We keep original black background in all the correct IQ .C16 files BW's Options */
-    if (new_sampling_rate > 4'800'000) {  // > BW >600kHz  (fs=8*BW), (750kHz...2750kHz)
+    /* We are changing "REC" icon background to yellow in BW rec Options >1Mhz
+     * > 1Mhz BW options , we are NOT recording full IQ .C16 files (those files has some periodical  missing dropped samples).
+     * Those recorded files, has not the full IQ samples information, looks like decimated in file size.
+     * They are ok as recorded spectrum indication, but they should not be used by Replay app. (the voice speed will be accelerated)
+
+     * We keep original black background in all the correct IQ .C16 files BW's Options. */
+    if (actual_sampling_rate > 8'000'000) {  // Till fw 1.7.4  BW limit yellow REC button  was >500khz, now  BW >1Mhz  (fs=8*BW), (>1Mhz ..2M75)
         button_record.set_background(ui::Color::yellow());
     } else {
         button_record.set_background(ui::Color::black());
     }
 
-    if (new_sampling_rate != sampling_rate ||
-        new_oversample_rate != oversample_rate) {
+    if (sampling_rate != new_sampling_rate) {
         stop();
 
         sampling_rate = new_sampling_rate;
-        oversample_rate = new_oversample_rate;
-        baseband::set_sample_rate(sampling_rate);
-        baseband::set_oversample_rate(oversample_rate);
+        baseband::set_sample_rate(sampling_rate, oversample_rate);
 
         button_record.hidden(sampling_rate == 0);
         text_record_filename.hidden(sampling_rate == 0);
@@ -131,6 +133,24 @@ void RecordView::set_sampling_rate(size_t new_sampling_rate, OversampleRate new_
 
         update_status_display();
     }
+
+    return actual_sampling_rate;
+}
+
+OversampleRate RecordView::get_oversample_rate(uint32_t sample_rate) {
+    // No oversampling necessary for baseband audio processors.
+    if (file_type == FileType::WAV)
+        return OversampleRate::None;
+
+    auto rate = ::get_oversample_rate(sample_rate);
+
+    // Currently proc_capture only supports x8 and x16 for decimation.
+    if (rate < OversampleRate::x8)
+        rate = OversampleRate::x8;
+    else if (rate > OversampleRate::x16)
+        rate = OversampleRate::x16;
+
+    return rate;
 }
 
 // Setter for datetime and frequency filename
@@ -202,8 +222,7 @@ void RecordView::start() {
         case FileType::RawS8:
         case FileType::RawS16: {
             const auto metadata_file_error = write_metadata_file(
-                get_metadata_path(base_path),
-                {receiver_model.target_frequency(), sampling_rate / toUType(oversample_rate)});
+                get_metadata_path(base_path), {receiver_model.target_frequency(), sampling_rate});
             if (metadata_file_error.is_valid()) {
                 handle_error(metadata_file_error.value());
                 return;
@@ -278,12 +297,7 @@ void RecordView::update_status_display() {
         // - C8 captures 2 (I,Q) int8_t per sample or '2' bytes per sample.
         // - C16 captures 2 (I,Q) int16_t per sample or '4' bytes per sample.
         const auto bytes_per_sample = file_type == FileType::RawS16 ? 4 : 2;
-        // WAV files are not oversampled, but C8 and C16 are. Divide by the
-        // oversample rate to get the effective sample rate.
-        const auto effective_sampling_rate = file_type == FileType::WAV
-                                                 ? sampling_rate
-                                                 : sampling_rate / toUType(oversample_rate);
-        const uint32_t bytes_per_second = effective_sampling_rate * bytes_per_sample;
+        const uint32_t bytes_per_second = sampling_rate * bytes_per_sample;
         const uint32_t available_seconds = space_info.free / bytes_per_second;
         const uint32_t seconds = available_seconds % 60;
         const uint32_t available_minutes = available_seconds / 60;

firmware/application/ui_record_view.hpp

@@ -56,16 +56,11 @@ class RecordView : public View {
 
     void focus() override;
 
-    /* Sets the sampling rate and the oversampling "decimation" rate.
-     * These values are passed down to the baseband proc_capture. For
-     * Audio (WAV) recording, the OversampleRate should not be
-     * specified and the default will be used. */
-    /* TODO: Currently callers are expected to have already multiplied the
-     * sample_rate with the oversample rate. It would be better move that
-     * logic to a single place. */
-    void set_sampling_rate(
-        size_t new_sampling_rate,
-        OversampleRate new_oversample_rate = OversampleRate::Rate8x);
+    /* Sets the sampling rate for the baseband.
+     * NB: Do not pre-apply any oversampling. This function will determine
+     * the correct amount of oversampling and return the actual sample rate
+     * that can be used to configure the radio or other UI element. */
+    uint32_t set_sampling_rate(uint32_t new_sampling_rate);
 
     void set_file_type(const FileType v) { file_type = v; }
 
@@ -87,6 +82,8 @@ class RecordView : public View {
     void handle_capture_thread_done(const File::Error error);
     void handle_error(const File::Error error);
 
+    OversampleRate get_oversample_rate(uint32_t sample_rate);
+
     // bool pitch_rssi_enabled = false;
 
     // Time Stamp
@@ -98,8 +95,7 @@ class RecordView : public View {
     FileType file_type;
     const size_t write_size;
     const size_t buffer_count;
-    size_t sampling_rate{0};
-    OversampleRate oversample_rate{OversampleRate::Rate8x};
+    uint32_t sampling_rate{0};
     SignalToken signal_token_tick_second{};
 
     Rectangle rect_background{

firmware/baseband/proc_audiotx.cpp

@@ -77,8 +77,8 @@ void AudioTXProcessor::on_message(const Message* const message) {
             replay_config(*reinterpret_cast<const ReplayConfigMessage*>(message));
             break;
 
-        case Message::ID::SamplerateConfig:
-            samplerate_config(*reinterpret_cast<const SamplerateConfigMessage*>(message));
+        case Message::ID::SampleRateConfig:
+            sample_rate_config(*reinterpret_cast<const SampleRateConfigMessage*>(message));
             break;
 
         case Message::ID::FIFOData:
@@ -108,7 +108,7 @@ void AudioTXProcessor::replay_config(const ReplayConfigMessage& message) {
     }
 }
 
-void AudioTXProcessor::samplerate_config(const SamplerateConfigMessage& message) {
+void AudioTXProcessor::sample_rate_config(const SampleRateConfigMessage& message) {
     resample_inc = (((uint64_t)message.sample_rate) << 16) / baseband_fs;  // 16.16 fixed point message.sample_rate
 }
 

firmware/baseband/proc_audiotx.hpp

@@ -53,7 +53,7 @@ class AudioTXProcessor : public BasebandProcessor {
     bool configured{false};
     uint32_t bytes_read{0};
 
-    void samplerate_config(const SamplerateConfigMessage& message);
+    void sample_rate_config(const SampleRateConfigMessage& message);
     void audio_config(const AudioTXConfigMessage& message);
     void replay_config(const ReplayConfigMessage& message);
 

firmware/baseband/proc_capture.cpp

@@ -27,8 +27,10 @@
 #include "utility.hpp"
 
 CaptureProcessor::CaptureProcessor() {
-    decim_0_4.configure(taps_200k_decim_0.taps, 33554432);
-    decim_0_8.configure(taps_200k_decim_0.taps, 33554432);
+    decim_0_4.configure(taps_200k_decim_0.taps, 33554432);           // to be used with decim1 (/2), then total two stages decim (/8)
+    decim_0_8.configure(taps_200k_decim_0.taps, 33554432);           // to be used with decim1 (/2), then total two stages decim (/16)
+    decim_0_8_180k.configure(taps_180k_wfm_decim_0.taps, 33554432);  // to be used alone - no additional decim1 (/2), then total single stage decim (/8)
+
     decim_1.configure(taps_200k_decim_1.taps, 131072);
 
     channel_spectrum.set_decimation_factor(1);
@@ -37,8 +39,12 @@ CaptureProcessor::CaptureProcessor() {
 
 void CaptureProcessor::execute(const buffer_c8_t& buffer) {
     /* 2.4576MHz, 2048 samples */
-    const auto decim_0_out = decim_0_execute(buffer, dst_buffer);
-    const auto decim_1_out = decim_1.execute(decim_0_out, dst_buffer);
+    const auto decim_0_out = decim_0_execute(buffer, dst_buffer);  // selectable 3 possible decim_0, (/4.  /8 200k soft transition filter , /8 180k sharp )
+
+    const auto decim_1_out = baseband_fs < 4800'000
+                                 ? decim_1.execute(decim_0_out, dst_buffer)  // < 500khz double decim. stage
+                                 : decim_0_out;                              // > 500khz single decim. stage
+
     const auto& decimator_out = decim_1_out;
     const auto& channel = decimator_out;
 
@@ -66,19 +72,9 @@ void CaptureProcessor::on_message(const Message* const message) {
             channel_spectrum.on_message(message);
             break;
 
-        case Message::ID::SamplerateConfig: {
-            auto config = reinterpret_cast<const SamplerateConfigMessage*>(message);
-            baseband_fs = config->sample_rate;
-            update_for_rate_change();
+        case Message::ID::SampleRateConfig:
+            sample_rate_config(*reinterpret_cast<const SampleRateConfigMessage*>(message));
             break;
-        }
-
-        case Message::ID::OversampleRateConfig: {
-            auto config = reinterpret_cast<const OversampleRateConfigMessage*>(message);
-            oversample_rate = config->oversample_rate;
-            update_for_rate_change();
-            break;
-        }
 
         case Message::ID::CaptureConfig:
             capture_config(*reinterpret_cast<const CaptureConfigMessage*>(message));
@@ -89,13 +85,15 @@ void CaptureProcessor::on_message(const Message* const message) {
     }
 }
 
-void CaptureProcessor::update_for_rate_change() {
+void CaptureProcessor::sample_rate_config(const SampleRateConfigMessage& message) {
+    baseband_fs = message.sample_rate * toUType(message.oversample_rate);
+    oversample_rate = message.oversample_rate;
+
     baseband_thread.set_sampling_rate(baseband_fs);
 
-    auto decim_0_factor = oversample_rate == OversampleRate::Rate8x
+    auto decim_0_factor = oversample_rate == OversampleRate::x8
                               ? decim_0_4.decimation_factor
                               : decim_0_8.decimation_factor;
-
     size_t decim_0_output_fs = baseband_fs / decim_0_factor;
 
     size_t decim_1_input_fs = decim_0_output_fs;
@@ -119,10 +117,14 @@ void CaptureProcessor::capture_config(const CaptureConfigMessage& message) {
 
 buffer_c16_t CaptureProcessor::decim_0_execute(const buffer_c8_t& src, const buffer_c16_t& dst) {
     switch (oversample_rate) {
-        case OversampleRate::Rate8x:
-            return decim_0_4.execute(src, dst);
+        case OversampleRate::x8:                     // we can get /8 by two means , decim0 (:4) + decim1 (:2) .  or just decim0 (;8)
+            if (baseband_fs < 4800'000) {            // 600khz (600k x 8)
+                return decim_0_4.execute(src, dst);  // decim_0  /4 with double decim stage
+            } else {
+                return decim_0_8_180k.execute(src, dst);  // decim_0  /8 with single decim stage
+            }
 
-        case OversampleRate::Rate16x:
+        case OversampleRate::x16:
             return decim_0_8.execute(src, dst);
 
         default:

firmware/baseband/proc_capture.hpp

@@ -42,7 +42,7 @@ class CaptureProcessor : public BasebandProcessor {
     void on_message(const Message* const message) override;
 
    private:
-    size_t baseband_fs = 3072000;
+    size_t baseband_fs = 3072000;  // aka: sample_rate
     static constexpr auto spectrum_rate_hz = 50.0f;
 
     std::array<complex16_t, 512> dst{};
@@ -56,8 +56,9 @@ class CaptureProcessor : public BasebandProcessor {
      * use decim_0_8 for an overall decimation factor of 16. */
     dsp::decimate::FIRC8xR16x24FS4Decim4 decim_0_4{};
     dsp::decimate::FIRC8xR16x24FS4Decim8 decim_0_8{};
-
+    dsp::decimate::FIRC8xR16x24FS4Decim8 decim_0_8_180k{};
     dsp::decimate::FIRC16xR16x16Decim2 decim_1{};
+
     int32_t channel_filter_low_f = 0;
     int32_t channel_filter_high_f = 0;
     int32_t channel_filter_transition = 0;
@@ -67,15 +68,14 @@ class CaptureProcessor : public BasebandProcessor {
     SpectrumCollector channel_spectrum{};
     size_t spectrum_interval_samples = 0;
     size_t spectrum_samples = 0;
-    OversampleRate oversample_rate{OversampleRate::Rate8x};
+    OversampleRate oversample_rate{OversampleRate::x8};
 
     /* NB: Threads should be the last members in the class definition. */
     BasebandThread baseband_thread{
         baseband_fs, this, baseband::Direction::Receive, /*auto_start*/ false};
     RSSIThread rssi_thread{};
 
-    /* Called to update members when the sample rate or oversample rate is changed. */
-    void update_for_rate_change();
+    void sample_rate_config(const SampleRateConfigMessage& message);
     void capture_config(const CaptureConfigMessage& message);
 
     /* Dispatch to the correct decim_0 based on oversample rate. */

firmware/baseband/proc_gps_sim.cpp

@@ -83,8 +83,8 @@ void GPSReplayProcessor::on_message(const Message* const message) {
             channel_spectrum.on_message(message);
             break;
 
-        case Message::ID::SamplerateConfig:
-            samplerate_config(*reinterpret_cast<const SamplerateConfigMessage*>(message));
+        case Message::ID::SampleRateConfig:
+            sample_rate_config(*reinterpret_cast<const SampleRateConfigMessage*>(message));
             break;
 
         case Message::ID::ReplayConfig:
@@ -103,7 +103,7 @@ void GPSReplayProcessor::on_message(const Message* const message) {
     }
 }
 
-void GPSReplayProcessor::samplerate_config(const SamplerateConfigMessage& message) {
+void GPSReplayProcessor::sample_rate_config(const SampleRateConfigMessage& message) {
     baseband_fs = message.sample_rate;
     baseband_thread.set_sampling_rate(baseband_fs);
     spectrum_interval_samples = baseband_fs / spectrum_rate_hz;

firmware/baseband/proc_gps_sim.hpp

@@ -64,7 +64,7 @@ class GPSReplayProcessor : public BasebandProcessor {
     bool configured{false};
     uint32_t bytes_read{0};
 
-    void samplerate_config(const SamplerateConfigMessage& message);
+    void sample_rate_config(const SampleRateConfigMessage& message);
     void replay_config(const ReplayConfigMessage& message);
 
     TXProgressMessage txprogress_message{};

firmware/baseband/proc_replay.cpp

@@ -41,43 +41,75 @@ ReplayProcessor::ReplayProcessor() {
     baseband_thread.start();
 }
 
-void ReplayProcessor::execute(const buffer_c8_t& buffer) {
-    /* 4MHz, 2048 samples */
+// Change to 1 to enable buffer assertions in replay.
+#define BUFFER_SIZE_ASSERT 0
 
+void ReplayProcessor::execute(const buffer_c8_t& buffer) {
     if (!configured || !stream) return;
 
-    buffer_c16_t iq_buffer{iq.data(), iq.size(), baseband_fs / 8};
+    // Because this is actually adding samples, alias
+    // oversample_rate so the math below is more clear.
+    const size_t interpolation_factor = toUType(oversample_rate);
 
-    // File data is in C16 format, we need C8
-    // File samplerate is 500kHz, we're at 4MHz
-    // iq_buffer can only be 512 C16 samples (RAM limitation)
-    // To fill up the 2048-sample C8 buffer, we need:
-    // 2048 samples * 2 bytes per sample = 4096 bytes
-    // Since we're oversampling by 4M/500k = 8, we only need 2048/8 = 256 samples from the file and duplicate them 8 times each
-    // So 256 * 4 bytes per sample (C16) = 1024 bytes from the file
-    const size_t bytes_to_read = sizeof(*buffer.p) * 2 * (buffer.count / 8);  // *2 (C16), /8 (oversampling) should be == 1024
-    size_t bytes_read_this_iteration = stream->read(iq_buffer.p, bytes_to_read);
-    size_t oversamples_this_iteration = bytes_read_this_iteration * 8 / (sizeof(*buffer.p) * 2);
+    // Wrap the IQ data array in a buffer with the correct sample_rate.
+    buffer_c16_t iq_buffer{iq.data(), iq.size(), baseband_fs / interpolation_factor};
 
-    bytes_read += bytes_read_this_iteration;
+    // The IQ data in stream is C16 format and needs to be converted to C8 (N * 2).
+    // The data also needs to be interpolated so the effective sample rate is closer
+    // to 4Mhz. Because interpolation repeats a sample multiple times, fewer bytes
+    // are needed from the source stream in order to fill the buffer (count / oversample).
+    // Together the C16->C8 conversion and the interpolation give the number of
+    // bytes that need to be read from the source stream.
+    const size_t samples_to_read = buffer.count / interpolation_factor;
+    const size_t bytes_to_read = samples_to_read * sizeof(buffer_c16_t::Type);
 
-    // Fill and "stretch"
-    for (size_t i = 0; i < oversamples_this_iteration; i++) {
-        if (i & 7) {
-            buffer.p[i] = buffer.p[i - 1];
-        } else {
-            auto re_out = iq_buffer.p[i >> 3].real() >> 8;
-            auto im_out = iq_buffer.p[i >> 3].imag() >> 8;
-            buffer.p[i] = {(int8_t)re_out, (int8_t)im_out};
+#if BUFFER_SIZE_ASSERT
+    // Verify the output buffer size is divisible by the interpolation factor.
+    if (samples_to_read * interpolation_factor != buffer.count)
+        chDbgPanic("Output not div.");
+
+    // Is the input smaple buffer big enough?
+    if (samples_to_read > iq_buffer.size())
+        chDbgPanic("IQ buf ovf.");
+#endif
+
+    // Read the C16 IQ data from the source stream.
+    size_t current_bytes_read = stream->read(iq_buffer.p, bytes_to_read);
+
+    // Compute the number of samples were actually read from the source.
+    size_t samples_read = current_bytes_read / sizeof(buffer_c16_t::Type);
+
+    // Write converted source samples to the output buffer with interpolation.
+    for (auto i = 0u; i < samples_read; ++i) {
+        int8_t re_out = iq_buffer.p[i].real() >> 8;
+        int8_t im_out = iq_buffer.p[i].imag() >> 8;
+        auto out_value = buffer_c8_t::Type{re_out, im_out};
+
+        // Interpolate sample.
+        for (auto j = 0u; j < interpolation_factor; ++j) {
+            size_t index = i * interpolation_factor + j;
+            buffer.p[index] = out_value;
+
+#if BUFFER_SIZE_ASSERT
+            // Verify the index is within bounds.
+            if (index >= buffer.count)
+                chDbgPanic("Output bounds");
+#endif
         }
     }
 
-    spectrum_samples += oversamples_this_iteration;
+    // Update tracking stats.
+    bytes_read += current_bytes_read;
+    spectrum_samples += samples_read * interpolation_factor;
+
     if (spectrum_samples >= spectrum_interval_samples) {
         spectrum_samples -= spectrum_interval_samples;
-        channel_spectrum.feed(iq_buffer, channel_filter_low_f, channel_filter_high_f, channel_filter_transition);
+        channel_spectrum.feed(
+            iq_buffer, channel_filter_low_f,
+            channel_filter_high_f, channel_filter_transition);
 
-        txprogress_message.progress = bytes_read;  // Inform UI about progress
+        // Inform UI about progress.
+        txprogress_message.progress = bytes_read;
         txprogress_message.done = false;
         shared_memory.application_queue.push(txprogress_message);
     }
@@ -90,8 +122,8 @@ void ReplayProcessor::on_message(const Message* const message) {
             channel_spectrum.on_message(message);
             break;
 
-        case Message::ID::SamplerateConfig:
-            samplerate_config(*reinterpret_cast<const SamplerateConfigMessage*>(message));
+        case Message::ID::SampleRateConfig:
+            sample_rate_config(*reinterpret_cast<const SampleRateConfigMessage*>(message));
             break;
 
         case Message::ID::ReplayConfig:
@@ -110,9 +142,11 @@ void ReplayProcessor::on_message(const Message* const message) {
     }
 }
 
-void ReplayProcessor::samplerate_config(const SamplerateConfigMessage& message) {
-    baseband_fs = message.sample_rate;
+void ReplayProcessor::sample_rate_config(const SampleRateConfigMessage& message) {
+    baseband_fs = message.sample_rate * toUType(message.oversample_rate);
+    oversample_rate = message.oversample_rate;
     baseband_thread.set_sampling_rate(baseband_fs);
+
     spectrum_interval_samples = baseband_fs / spectrum_rate_hz;
 }
 

firmware/baseband/proc_replay.hpp

@@ -44,6 +44,7 @@ class ReplayProcessor : public BasebandProcessor {
     size_t baseband_fs = 3072000;
     static constexpr auto spectrum_rate_hz = 50.0f;
 
+    // Holds the read IQ data chunk from the file to send.
     std::array<complex16_t, 256> iq{};
 
     int32_t channel_filter_low_f = 0;
@@ -58,8 +59,9 @@ class ReplayProcessor : public BasebandProcessor {
 
     bool configured{false};
     uint32_t bytes_read{0};
+    OversampleRate oversample_rate = OversampleRate::x8;
 
-    void samplerate_config(const SamplerateConfigMessage& message);
+    void sample_rate_config(const SampleRateConfigMessage& message);
     void replay_config(const ReplayConfigMessage& message);
 
     TXProgressMessage txprogress_message{};

firmware/common/buffer.hpp

@@ -49,6 +49,7 @@ using Timestamp = lpc43xx::rtc::RTC;
 
 template <typename T>
 struct buffer_t {
+    using Type = T;
     T* const p;
     const size_t count;
     const uint32_t sampling_rate;

firmware/common/lcd_ili9341.cpp

@@ -456,6 +456,9 @@ bool ILI9341::drawBMP2(const ui::Point p, const std::filesystem::path& file) {
     width = bmp_header.width;
     height = bmp_header.height;
 
+    if (width != 240)
+        return false;
+
     file_pos = bmp_header.image_data;
 
     py = height + 16;

firmware/common/message.hpp

@@ -78,7 +78,7 @@ class Message {
         ReplayThreadDone = 21,
         AFSKRxConfigure = 22,
         StatusRefresh = 23,
-        SamplerateConfig = 24,
+        SampleRateConfig = 24,
         BTLERxConfigure = 25,
         NRFRxConfigure = 26,
         TXProgress = 27,
@@ -111,7 +111,6 @@ class Message {
         APRSRxConfigure = 54,
         SpectrumPainterBufferRequestConfigure = 55,
         SpectrumPainterBufferResponseConfigure = 56,
-        OversampleRateConfig = 57,
         MAX
     };
 
@@ -799,32 +798,37 @@ class RetuneMessage : public Message {
     uint32_t range = 0;
 };
 
-class SamplerateConfigMessage : public Message {
-   public:
-    constexpr SamplerateConfigMessage(
-        const uint32_t sample_rate)
-        : Message{ID::SamplerateConfig},
-          sample_rate(sample_rate) {
-    }
-
-    const uint32_t sample_rate = 0;
-};
-
-/* Controls decimation handling in proc_capture. */
+/* Oversample/Interpolation sample rate multipliers. */
 enum class OversampleRate : uint8_t {
-    Rate8x = 8,
-    Rate16x = 16,
+    /* Use either to indicate there's no oversampling needed. */
+    None = 1,
+    x1 = None,
+
+    // 4x would make sense to have, but need to ensure it doesn't
+    // overrun the IQ read buffer in proc_replay.
+
+    /* Oversample rate of 8 times the sample rate. */
+    x8 = 8,
+
+    /* Oversample rate of 16 times the sample rate. */
+    x16 = 16,
+
+    /* Oversample rate of 32 times the sample rate. */
+    x32 = 32,
 };
 
-class OversampleRateConfigMessage : public Message {
+class SampleRateConfigMessage : public Message {
    public:
-    constexpr OversampleRateConfigMessage(
+    constexpr SampleRateConfigMessage(
+        uint32_t sample_rate,
         OversampleRate oversample_rate)
-        : Message{ID::OversampleRateConfig},
+        : Message{ID::SampleRateConfig},
+          sample_rate(sample_rate),
           oversample_rate(oversample_rate) {
     }
 
-    const OversampleRate oversample_rate{OversampleRate::Rate8x};
+    const uint32_t sample_rate = 0;
+    const OversampleRate oversample_rate = OversampleRate::None;
 };
 
 class AudioLevelReportMessage : public Message {

firmware/common/oversample.hpp

@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2023 Kyle Reed, zxkmm
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/* Helpers for handling oversampling and interpolation. */
+
+#ifndef __OVERSAMPLE_H__
+#define __OVERSAMPLE_H__
+
+#include "message.hpp"
+#include "utility.hpp"
+
+/* TODO:
+ * The decision to oversample/interpolate should only be a baseband concern.
+ * However, the baseband can't set up the radio (M0 code), so the apps also
+ * need to know about the "actual" sample rate so the radio settings can be
+ * applied correctly. Ideally the baseband would tell the apps what the
+ * actual sample rate is. Currently the apps are telling the baseband and
+ * that feels like a separation of concerns problem. */
+
+/* HackRF suggests a minimum sample rate of 2M so a oversample rate is applied
+ * to the sample rate (pre-scale) to get the sample rate closer to that target.
+ * The baseband needs to know how to correctly decimate (or interpolate) so
+ * the set of allowed scalars is fixed (See OversampleRate enum).
+ * In testing, a minimum rate of 400kHz seems to the functional minimum.
+ */
+
+/* Gets the oversample rate for a given sample rate.
+ * The oversample rate is used to increase the sample rate to improve SNR and quality.
+ * This is also used as the interpolation rate when replaying captures. */
+inline OversampleRate get_oversample_rate(uint32_t sample_rate) {
+    if (sample_rate < 25'000) return OversampleRate::x32;
+    if (sample_rate < 50'000) return OversampleRate::x16;
+
+    return OversampleRate::x8;
+}
+
+/* Gets the actual sample rate for a given sample rate.
+ * This is the rate with the correct oversampling rate applied. */
+inline uint32_t get_actual_sample_rate(uint32_t sample_rate) {
+    return sample_rate * toUType(get_oversample_rate(sample_rate));
+}
+
+#endif /*__OVERSAMPLE_H__*/