Adding_BPF_selection_to_the_NOAA_APT_signal (#2675)

* Adding_BPF_selection_to_the_NOAA_APT_signal
* comments, spell mistake .

README.md

@@ -28,7 +28,7 @@ This repository expands upon the previous work by many people and aims to consta
 ## What to buy?
 
 <!---not direct to h4m but to opensourcesdrlab https://share.hackrf.app/TUOLYI---> 
-:heavy_check_mark: ![Static Badge](https://img.shields.io/badge/NEW-yellow) The fabulous H4M [complete](https://share.hackrf.app/ABDO6H) or [upgrade](https://share.hackrf.app/FPLM1H), featuring numerous improvements and accessories. Sold by our friends at [OpenSourceSDRLab](https://share.hackrf.app/99SAMT). Join their giveaways on discord (check the badge on top). _EU customers_ can purchase via [Lab401](https://share.hackrf.app/0CI2CR).
+:heavy_check_mark: ![Static Badge](https://img.shields.io/badge/NEW-yellow) The fabulous H4M [complete](https://share.hackrf.app/9UMBN5) or [upgrade](https://share.hackrf.app/30CQ55), featuring numerous improvements and accessories. Sold by our friends at [OpenSourceSDRLab](https://share.hackrf.app/99SAMT). Join their giveaways on discord (check the badge on top). _EU customers_ can purchase via [Lab401](https://share.hackrf.app/0CI2CR).
 
 :heavy_check_mark: A recommended one is this [PortaPack H2](https://www.ebay.com/itm/116382397447), that includes everything you need with the plastic case "inspired" on [this](https://github.com/portapack-mayhem/mayhem-firmware/wiki/3d-printed-enclosure).
 

firmware/application/app_settings.cpp

@@ -188,6 +188,7 @@ void copy_to_radio_model(const AppSettings& settings) {
             settings.am_config_index,
             settings.nbfm_config_index,
             settings.wfm_config_index,
+            settings.wfmam_config_index,
             settings.squelch);
     }
 
@@ -218,6 +219,7 @@ void copy_from_radio_model(AppSettings& settings) {
         settings.am_config_index = receiver_model.am_configuration();
         settings.nbfm_config_index = receiver_model.nbfm_configuration();
         settings.wfm_config_index = receiver_model.wfm_configuration();
+        settings.wfmam_config_index = receiver_model.wfmam_configuration();
     }
 
     settings.step = receiver_model.frequency_step();
@@ -271,6 +273,7 @@ SettingsManager::SettingsManager(
         bindings_.emplace_back("am_config_index"sv, &settings_.am_config_index);
         bindings_.emplace_back("nbfm_config_index"sv, &settings_.nbfm_config_index);
         bindings_.emplace_back("wfm_config_index"sv, &settings_.wfm_config_index);
+        bindings_.emplace_back("wfmam_config_index"sv, &settings_.wfmam_config_index);
         bindings_.emplace_back("squelch"sv, &settings_.squelch);
     }
 

firmware/application/app_settings.hpp

@@ -139,6 +139,7 @@ struct AppSettings {
     uint8_t am_config_index = 0;
     uint8_t nbfm_config_index = 0;
     uint8_t wfm_config_index = 0;
+    uint8_t wfmam_config_index = 0;
     uint8_t squelch = 80;
     uint8_t volume;
     // NOTE: update COMMON_APP_SETTINGS_COUNT when adding to this

firmware/application/apps/ais_app.hpp

@@ -210,7 +210,7 @@ class AISAppView : public View {
     };
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     Channel channel{
         {21 * 8, 5, 6 * 8, 4},

firmware/application/apps/analog_audio_app.cpp

@@ -114,6 +114,26 @@ WFMOptionsView::WFMOptionsView(
     };
 }
 
+/* WFMAMAptOptionsView *******************************************************/
+
+WFMAMAptOptionsView::WFMAMAptOptionsView(
+    Rect parent_rect,
+    const Style* style)
+    : View{parent_rect} {
+    set_style(style);
+
+    add_children({
+        &label_config,
+        &options_config,
+    });
+
+    freqman_set_bandwidth_option(WFMAM_MODULATION, options_config);  // adding the common message from freqman.cpp to the options_config
+    options_config.set_by_value(receiver_model.wfmam_configuration());
+    options_config.on_change = [this](size_t, OptionsField::value_t n) {
+        receiver_model.set_wfmam_configuration(n);
+    };
+}
+
 /* AMFMAptOptionsView *********************************************************/
 
 AMFMAptOptionsView::AMFMAptOptionsView(
@@ -415,6 +435,12 @@ void AnalogAudioView::on_show_options_modulation() {
             text_ctcss.hidden(true);
             break;
 
+        case ReceiverModel::Mode::WFMAudioAMApt:
+            widget = std::make_unique<WFMAMAptOptionsView>(options_view_rect, Theme::getInstance()->option_active);
+            waterfall.show_audio_spectrum_view(true);
+            text_ctcss.hidden(true);
+            break;
+
         case ReceiverModel::Mode::AMAudioFMApt:
             widget = std::make_unique<AMFMAptOptionsView>(this, options_view_rect, Theme::getInstance()->option_active);
             waterfall.show_audio_spectrum_view(false);
@@ -462,7 +488,10 @@ void AnalogAudioView::update_modulation(ReceiverModel::Mode modulation) {
         case ReceiverModel::Mode::WidebandFMAudio:
             image_tag = portapack::spi_flash::image_tag_wfm_audio;
             break;
-        case ReceiverModel::Mode::AMAudioFMApt:  // TODO pending to update it.
+        case ReceiverModel::Mode::WFMAudioAMApt:
+            image_tag = portapack::spi_flash::image_tag_wfm_audio;
+            break;
+        case ReceiverModel::Mode::AMAudioFMApt:
             image_tag = portapack::spi_flash::image_tag_am_audio;
             break;
         case ReceiverModel::Mode::SpectrumAnalysis:
@@ -501,7 +530,10 @@ void AnalogAudioView::update_modulation(ReceiverModel::Mode modulation) {
         case ReceiverModel::Mode::WidebandFMAudio:
             sampling_rate = 48000;
             break;
-        case ReceiverModel::Mode::AMAudioFMApt:  // TODO  Wefax mode.
+        case ReceiverModel::Mode::WFMAudioAMApt:
+            sampling_rate = 12000;
+            break;
+        case ReceiverModel::Mode::AMAudioFMApt:
             sampling_rate = 12000;
             break;
         default:

firmware/application/apps/analog_audio_app.hpp

@@ -74,7 +74,7 @@ class AMFMAptOptionsView : public View {
 
     OptionsField options_config{
         {3 * 8, 0 * 16},
-        6,  // Max option length chars
+        17,  // Max option length chars   "USB+FM(Wefax Apt)"
         {
             // Using common messages from freqman_ui.cpp In HF USB , Here  we only need USB Audio demod, + post-FM demod fsubcarrier FM tone to get APT signal.
         }};
@@ -132,6 +132,23 @@ class WFMOptionsView : public View {
         }};
 };
 
+class WFMAMAptOptionsView : public View {
+   public:
+    WFMAMAptOptionsView(Rect parent_rect, const Style* style);
+
+   private:
+    Text label_config{
+        {0 * 8, 0 * 16, 2 * 8, 1 * 16},
+        "BW",
+    };
+    OptionsField options_config{
+        {3 * 8, 0 * 16},
+        19,  // Max option char length "80k-NOAA Apt LPF-2K" , example.
+        {
+            // Using common messages from freqman_ui.cpp
+        }};
+};
+
 class SPECOptionsView : public View {
    public:
     SPECOptionsView(AnalogAudioView* view, Rect parent_rect, const Style* style);
@@ -168,7 +185,7 @@ class SPECOptionsView : public View {
         {19 * 8, 0 * 16, 11 * 8, 1 * 16},  // 18 (x col.) x char_size,  12 (length) x 8 blanking space to delete previous chars.
         "Rx_IQ_CAL  "};
     NumberField field_rx_iq_phase_cal{
-        {28 * 8, 0 * 16},
+        {screen_width - 2 * 8, 0 * 16},
         2,
         {0, 63},  // 5 or 6 bits IQ CAL phase adjustment (range updated later)
         1,
@@ -215,7 +232,7 @@ class AnalogAudioView : public View {
     uint8_t zoom_factor_amfm{0};             // initial zoom factor in AMFM mode
     uint8_t previous_AM_mode_option{0};      // GUI 5 AM modes :  (0..4 ) (DSB9K, DSB6K, USB,LSB, CW). Used to select proper FIR filter (0..11) AM mode  + offset 0 (zoom+1) or +6 (if zoom+2)
     uint8_t previous_zoom{0};                // GUI ZOOM+1, ZOOM+2 , equivalent to two values offset 0 (zoom+1) or +6 (if zoom+2)
-                                             //
+
     app_settings::SettingsManager settings_{
         "rx_audio",
         app_settings::Mode::RX,
@@ -227,7 +244,7 @@ class AnalogAudioView : public View {
             {"previous_zoom"sv, &previous_zoom},                      // we are saving and restoring AMFM ZOOM factor from Settings.
         }};
 
-    const Rect options_view_rect{0 * 8, 1 * 16, 30 * 8, 1 * 16};
+    const Rect options_view_rect{0 * 8, 1 * 16, screen_width, 1 * 16};
     const Rect nbfm_view_rect{0 * 8, 1 * 16, 18 * 8, 1 * 16};
 
     size_t spec_bw_index = 0;
@@ -261,11 +278,12 @@ class AnalogAudioView : public View {
             {"NFM ", toUType(ReceiverModel::Mode::NarrowbandFMAudio)},
             {"WFM ", toUType(ReceiverModel::Mode::WidebandFMAudio)},
             {"SPEC", toUType(ReceiverModel::Mode::SpectrumAnalysis)},
-            {"AMFM", toUType(ReceiverModel::Mode::AMAudioFMApt)}  // Added to handle  HF  WeatherFax , SSB (USB demod) + Tone_Subcarrier FM demod
+            {"AMFM", toUType(ReceiverModel::Mode::AMAudioFMApt)},  // Added to handle  HF  WeatherFax , SSB (USB demod) + Tone_Subcarrier FM demod
+            {"FMAM", toUType(ReceiverModel::Mode::WFMAudioAMApt)}  // Added to handle  SAT NOAA APT
         }};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     Text text_ctcss{
         {16 * 8, 1 * 16, 14 * 8, 1 * 16},
@@ -274,7 +292,7 @@ class AnalogAudioView : public View {
     std::unique_ptr<Widget> options_widget{};
 
     RecordView record_view{
-        {0 * 8, 2 * 16, 30 * 8, 1 * 16},
+        {0 * 8, 2 * 16, screen_width, 1 * 16},
         u"AUD",
         u"AUDIO",
         RecordView::FileType::WAV,

firmware/application/apps/ble_comm_app.hpp

@@ -170,7 +170,7 @@ class BLECommView : public View {
         "-"};
 
     Console console{
-        {0, 4 * 16, 240, 240}};
+        {0, 4 * 16, ui::screen_width, ui::screen_height - 80}};
 
     std::string str_log{""};
     bool logging{false};

firmware/application/apps/ble_rx_app.cpp

@@ -33,6 +33,7 @@
 #include "portapack_persistent_memory.hpp"
 #include "ui_fileman.hpp"
 #include "ui_textentry.hpp"
+#include "usb_serial_asyncmsg.hpp"
 
 using namespace portapack;
 using namespace modems;
@@ -446,6 +447,8 @@ BLERxView::BLERxView(NavigationView& nav)
                   &button_switch,
                   &recent_entries_view});
 
+    async_tx_states_when_entered = portapack::async_tx_enabled;
+
     recent_entries_view.on_select = [this](const BleRecentEntry& entry) {
         nav_.push<BleRecentEntryDetailView>(entry);
     };
@@ -453,9 +456,9 @@ BLERxView::BLERxView(NavigationView& nav)
     check_serial_log.on_select = [this](Checkbox&, bool v) {
         serial_logging = v;
         if (v) {
-            usb_serial_thread = std::make_unique<UsbSerialThread>();
+            portapack::async_tx_enabled = true;
         } else {
-            usb_serial_thread.reset();
+            portapack::async_tx_enabled = false;
         }
     };
     check_serial_log.set_value(serial_logging);
@@ -755,8 +758,7 @@ void BLERxView::on_data(BlePacketData* packet) {
     }
 
     if (serial_logging) {
-        usb_serial_thread->serial_str = str_console + "\r\n";
-        usb_serial_thread->str_ready = true;
+        UsbSerialAsyncmsg::asyncmsg(str_console);  // new line handled there, no need here.
     }
     str_console = "";
 
@@ -916,6 +918,7 @@ void BLERxView::set_parent_rect(const Rect new_parent_rect) {
 }
 
 BLERxView::~BLERxView() {
+    portapack::async_tx_enabled = async_tx_states_when_entered;
     receiver_model.disable();
     baseband::shutdown();
 }

firmware/application/apps/ble_rx_app.hpp

@@ -219,6 +219,7 @@ class BLERxView : public View {
     std::string filter{};
     bool logging{false};
     bool serial_logging{false};
+    bool async_tx_states_when_entered{false};
 
     bool name_enable{true};
     app_settings::SettingsManager settings_{
@@ -340,18 +341,18 @@ class BLERxView : public View {
         true};
 
     // Console console{
-    //     {0, 10 * 8, 240, 240}};
+    //     {0, 10 * 8, screen_height, screen_height-80}};
 
     Button button_clear_list{
-        {2 * 8, 320 - (16 + 32), 7 * 8, 32},
+        {2 * 8, screen_height - (16 + 32), 7 * 8, 32},
         "Clear"};
 
     Button button_save_list{
-        {11 * 8, 320 - (16 + 32), 11 * 8, 32},
+        {11 * 8, screen_height - (16 + 32), 11 * 8, 32},
         "Export CSV"};
 
     Button button_switch{
-        {240 - 6 * 8, 320 - (16 + 32), 4 * 8, 32},
+        {screen_width - 6 * 8, screen_height - (16 + 32), 4 * 8, 32},
         "Tx"};
 
     std::string str_log{""};

firmware/application/apps/ble_tx_app.hpp

@@ -216,7 +216,7 @@ class BLETxView : public View {
         true};
 
     ImageButton button_play{
-        {28 * 8, 2 * 16, 2 * 8, 1 * 16},
+        {screen_width - 2 * 8, 2 * 16, 2 * 8, 1 * 16},
         &bitmap_play,
         Theme::getInstance()->fg_green->foreground,
         Theme::getInstance()->fg_green->background};
@@ -288,10 +288,10 @@ class BLETxView : public View {
         {{0 * 8, 9 * 16}, "Packet Data:", Theme::getInstance()->fg_light->foreground}};
 
     Console console{
-        {0, 9 * 18, 240, 240}};
+        {0, 9 * 18, screen_width, screen_height - 80}};
 
     TextViewer dataEditView{
-        {0, 9 * 18, 240, 240}};
+        {0, 9 * 18, screen_width, screen_height - 80}};
 
     Button button_clear_marked{
         {1 * 8, 14 * 16, 13 * 8, 3 * 8},

firmware/application/apps/capture_app.hpp

@@ -109,7 +109,7 @@ class CaptureAppView : public View {
         /*small*/ true};
 
     RecordView record_view{
-        {0 * 8, 2 * 16, 30 * 8, 1 * 16},
+        {0 * 8, 2 * 16, screen_width, 1 * 16},
         u"BBD_????.*",
         captures_dir,
         RecordView::FileType::RawS16,

firmware/application/apps/ert_app.hpp

@@ -166,7 +166,7 @@ class ERTAppView : public View {
     };
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     MessageHandlerRegistration message_handler_packet{
         Message::ID::ERTPacket,

firmware/application/apps/pocsag_app.hpp

@@ -259,7 +259,7 @@ class POCSAGAppView : public View {
         ' ',
         true /*wrap*/};
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     Image image_status{
         {0 * 8 + 4, 1 * 16 + 2, 16, 16},

firmware/application/apps/soundboard_app.cpp

@@ -91,10 +91,6 @@ void SoundBoardView::start_tx(const uint32_t id) {
 
     auto reader = std::make_unique<WAVFileReader>();
 
-    uint32_t tone_key_index = options_tone_key.selected_index();
-    uint32_t sample_rate;
-    uint8_t bits_per_sample;
-
     stop();
 
     if (!reader->open(u"/WAV/" + file_list[id].native())) {
@@ -108,7 +104,9 @@ void SoundBoardView::start_tx(const uint32_t id) {
 
     // button_play.set_bitmap(&bitmap_stop);
 
-    sample_rate = reader->sample_rate();
+    uint32_t sample_rate = reader->sample_rate();
+
+    tone_key_index = options_tone_key.selected_index();
     bits_per_sample = reader->bits_per_sample();
 
     replay_thread = std::make_unique<ReplayThread>(
@@ -155,6 +153,23 @@ void SoundBoardView::on_tx_progress(const uint32_t progress) {
     progressbar.set_value(progress);
 }
 
+void SoundBoardView::update_config() {
+    // NB: this were called by the on_bandwidth_changed() callback,
+    // so other val would be updated too when bw changed. currently it's safe but be careful.
+    baseband::set_audiotx_config(
+        1536000 / 20,  // Update vu-meter at 20Hz
+        transmitter_model.channel_bandwidth(),
+        0,  // Gain is unused
+        8,  // shift_bits_s16, default 8 bits, but also unused
+        bits_per_sample,
+        TONES_F2D(tone_key_frequency(tone_key_index), TONES_SAMPLERATE),
+        false,  // AM
+        false,  // DSB
+        false,  // USB
+        false   // LSB
+    );
+}
+
 void SoundBoardView::on_select_entry() {
     tx_view.focus();
 }
@@ -289,6 +304,10 @@ SoundBoardView::SoundBoardView(
         };
     };
 
+    tx_view.on_bandwidth_changed = [this]() {
+        update_config();
+    };
+
     tx_view.on_start = [this]() {
         start_tx(menu_view.highlighted_index());
     };

firmware/application/apps/soundboard_app.hpp

@@ -70,6 +70,8 @@ class SoundBoardView : public View {
     uint32_t playing_id{};
     uint32_t page = 1;
     uint32_t c_page = 1;
+    uint32_t tone_key_index = 1;
+    uint8_t bits_per_sample = 1;
 
     std::vector<std::filesystem::path> file_list{};
 
@@ -90,6 +92,7 @@ class SoundBoardView : public View {
     void on_tx_progress(const uint32_t progress);
     void refresh_list();
     void on_select_entry();
+    void update_config();
 
     Labels labels{
         {{24 * 8, 180}, "Vol:", Theme::getInstance()->fg_light->foreground},
@@ -104,10 +107,10 @@ class SoundBoardView : public View {
         "<="};
 
     Text page_info{
-        {0, 29 * 8, 30 * 8, 16}};
+        {0, 29 * 8, screen_width, 16}};
 
     MenuView menu_view{
-        {0, 0, 240, 175},
+        {0, 0, screen_width, 175},
         true};
     Text text_empty{
         {7 * 8, 12 * 8, 16 * 8, 16},
@@ -128,9 +131,9 @@ class SoundBoardView : public View {
         {}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 180}};
+        {screen_width - 2 * 8, 180}};
     Text text_volume_disabled{
-        {28 * 8, 180, 3 * 8, 16},
+        {screen_width - 2 * 8, 180, 3 * 8, 16},
         "--"};
 
     Checkbox check_loop{
@@ -144,7 +147,7 @@ class SoundBoardView : public View {
         "Random"};
 
     ProgressBar progressbar{
-        {0 * 8, 31 * 8 + 2, 30 * 8, 4}};
+        {0 * 8, 31 * 8 + 2, screen_width, 4}};
 
     TransmitterView tx_view{
         16 * 16,

firmware/application/apps/ui_about_simple.hpp

@@ -6,6 +6,10 @@
 
 #include <cstdint>
 
+/*
+    TODO: Now it is dyn width. There should be an algorithm to fill the menu based on it's size.
+*/
+
 namespace ui {
 class AboutView : public View {
    public:
@@ -22,11 +26,11 @@ class AboutView : public View {
     uint16_t frame_sync_count{0};
     void on_frame_sync();
     MenuView menu_view{
-        {0, 0, 240, 264},
+        {0, 0, screen_width, screen_height - 56},
         true};
 
     Button button_ok{
-        {240 / 3, 270, 240 / 3, 24},
+        {screen_width / 3, screen_height - 50, screen_width / 3, 24},
         "OK",
     };
 

firmware/application/apps/ui_adsb_rx.cpp

@@ -40,6 +40,8 @@ namespace pmem = portapack::persistent_memory;
 
 namespace ui {
 
+static const char speed_type_msg[][6] = {" Spd:", " IAS:", " TAS:"};
+
 static std::string get_map_tag(const AircraftRecentEntry& entry) {
     return trimr(entry.callsign.empty() ? entry.icao_str : entry.callsign);
 }
@@ -70,18 +72,34 @@ void RecentEntriesTable<AircraftRecentEntries>::draw(
 
     entry_string +=
         (entry.callsign.empty() ? entry.icao_str + "   " : entry.callsign + " ") +
-        to_string_dec_uint((unsigned int)(entry.pos.altitude / 100), 4) +
-        to_string_dec_uint((unsigned int)entry.velo.speed, 4) +
-        to_string_dec_uint((unsigned int)(entry.amp >> 9), 4) + " " +
-        (entry.hits <= 999 ? to_string_dec_uint(entry.hits, 3) + " " : "1k+ ") +
-        to_string_dec_uint(entry.age, 4);
+        to_string_dec_uint((unsigned int)(entry.pos.altitude / 100), 4);
+
+    if (entry.velo.type == SPD_IAS && entry.pos.alt_valid) {  // IAS can be converted to TAS
+        // It is generally accepted that for every thousand feet of altitude,
+        // true airspeed is approximately 2% higher than indicated airspeed.
+        // Since the application CPU has no floating point unit, we avoid floating point here
+        // tas = entry.velo.speed + (float)entry.pos.altitude / 1000.0 * 0.02 * entry.velo.speed;
+        unsigned int tas = entry.velo.speed + entry.pos.altitude * 2 * entry.velo.speed / 100000;
+
+        entry_string +=
+            to_string_dec_uint(tas, 4) + '*' +
+            to_string_dec_uint((unsigned int)(entry.amp >> 9), 3);
+    } else {
+        entry_string +=
+            to_string_dec_uint((unsigned int)entry.velo.speed, 4) +
+            to_string_dec_uint((unsigned int)(entry.amp >> 9), 4);
+    }
+
+    entry_string += " " +
+                    (entry.hits <= 999 ? to_string_dec_uint(entry.hits, 3) + " " : "1k+ ") +
+                    to_string_dec_uint(entry.age, 4);
 
     painter.draw_string(
         target_rect.location(),
         style,
         entry_string);
 
-    if (entry.pos.valid)
+    if (entry.pos.pos_valid)
         painter.draw_bitmap(target_rect.location() + Point(8 * 8, 0),
                             bitmap_target, target_color, style.background);
 }
@@ -93,22 +111,31 @@ void ADSBLogger::log(const ADSBLogEntry& log_entry) {
     log_line.reserve(100);
 
     log_line = log_entry.raw_data;
-    log_line += "ICAO:" + log_entry.icao;
+    log_line += " ICAO:" + log_entry.icao;
+
+    if (log_entry.sqwk)
+        log_line += " Squawk:" + to_string_dec_uint(log_entry.sqwk, 4, '0');
 
     if (!log_entry.callsign.empty())
         log_line += " " + log_entry.callsign;
 
-    if (log_entry.pos.valid)
-        log_line += " Alt:" + to_string_dec_int(log_entry.pos.altitude) +
-                    " Lat:" + to_string_decimal(log_entry.pos.latitude, 7) +
+    if (log_entry.pos.alt_valid)
+        log_line += " Alt:" + to_string_dec_int(log_entry.pos.altitude);
+
+    if (log_entry.pos.pos_valid)
+        log_line += " Lat:" + to_string_decimal(log_entry.pos.latitude, 7) +
                     " Lon:" + to_string_decimal(log_entry.pos.longitude, 7);
 
     if (log_entry.vel.valid)
         log_line += " Type:" + to_string_dec_uint(log_entry.vel_type) +
                     " Hdg:" + to_string_dec_uint(log_entry.vel.heading) +
-                    " Spd: " + to_string_dec_int(log_entry.vel.speed);
+                    speed_type_msg[log_entry.vel.type] +
+                    to_string_dec_int(log_entry.vel.speed) +
+                    " Vrate:" + to_string_dec_int(log_entry.vel.v_rate);
+
     if (log_entry.sil != 0)
         log_line += " Sil:" + to_string_dec_uint(log_entry.sil);
+
     log_file.write_entry(log_line);
 }
 
@@ -258,7 +285,7 @@ ADSBRxDetailsView::ADSBRxDetailsView(
             get_map_tag(entry_),
             entry_.pos.altitude,
             GeoPos::alt_unit::FEET,
-            GeoPos::spd_unit::MPH,
+            GeoPos::spd_unit::HIDDEN,
             entry_.pos.latitude,
             entry_.pos.longitude,
             entry_.velo.heading);
@@ -356,11 +383,12 @@ void ADSBRxDetailsView::refresh_ui() {
     text_callsign.set(entry_.callsign);
     text_infos.set(entry_.info_string);
     std::string str_sil = (entry_.sil > 0) ? " Sil:" + to_string_dec_uint(entry_.sil) : "";
+    std::string str_sqw = (entry_.sqwk > 0) ? " Sqw:" + to_string_dec_uint(entry_.sqwk) : "";
     if (entry_.velo.heading < 360 && entry_.velo.speed >= 0)
         text_info2.set("Hdg:" + to_string_dec_uint(entry_.velo.heading) +
-                       " Spd:" + to_string_dec_int(entry_.velo.speed) + str_sil);
+                       speed_type_msg[entry_.velo.type] + to_string_dec_int(entry_.velo.speed) + str_sil + str_sqw);
     else
-        text_info2.set(str_sil);
+        text_info2.set(str_sil + str_sqw);
 
     text_frame_pos_even.set(to_string_hex_array(entry_.frame_pos_even.get_raw_data(), 14));
     text_frame_pos_odd.set(to_string_hex_array(entry_.frame_pos_odd.get_raw_data(), 14));
@@ -381,7 +409,7 @@ ADSBRxView::ADSBRxView(NavigationView& nav) {
          &status_good_frame,
          &field_volume});
 
-    recent_entries_view.set_parent_rect({0, 16, 240, 272});
+    recent_entries_view.set_parent_rect({0, 16, screen_width, 272});
     recent_entries_view.on_select = [this, &nav](const AircraftRecentEntry& entry) {
         detail_key = entry.key();
         details_view = nav.push<ADSBRxDetailsView>(entry);
@@ -421,14 +449,22 @@ void ADSBRxView::focus() {
 
 void ADSBRxView::on_frame(const ADSBFrameMessage* message) {
     auto frame = message->frame;
-    uint32_t ICAO_address = frame.get_ICAO_address();
     status_frame.toggle();
 
-    // Bad frame, skip it.
-    if (!frame.check_CRC() || ICAO_address == 0)
-        return;
+    uint32_t ICAO_address;
+    uint32_t crc = frame.check_CRC();
+
+    if (crc != 0) {
+        if (find(recent, crc) != recent.end())
+            ICAO_address = crc;
+        else
+            return;  // Bad frame, skip it.
+    } else {
+        ICAO_address = frame.get_ICAO_address();
+        if (ICAO_address == 0)
+            return;  // Bad frame, skip it.
+    }
 
-    ADSBLogEntry log_entry;
     status_good_frame.toggle();
 
     rtc::RTC datetime;
@@ -440,42 +476,68 @@ void ADSBRxView::on_frame(const ADSBFrameMessage* message) {
     entry.inc_hit();
     entry.reset_age();
 
+    if (pmem::beep_on_packets()) {
+        baseband::request_audio_beep(1000, 24000, 60);
+    }
+
     // Store smoothed amplitude on updates.
     entry.amp = entry.hits == 0
                     ? message->amp
                     : ((entry.amp * 15) + message->amp) >> 4;
 
-    log_entry.raw_data = to_string_hex_array(frame.get_raw_data(), 14);
+    uint8_t df = frame.get_DF();
+
+    if (df == 11)  // do not log DF11, because messages arrive too frequently
+        return;
+
+    ADSBLogEntry log_entry;
+    uint8_t* raw_data = frame.get_raw_data();
+
+    if (df & 0x10)  // 112 bits
+        log_entry.raw_data = to_string_hex_array(raw_data, 14);
+    else {  // 56 bits
+        log_entry.raw_data = to_string_hex_array(raw_data, 7);
+        log_entry.raw_data.append(14, ' ');
+    }
+
     log_entry.icao = entry.icao_str;
 
-    if (frame.get_DF() == DF_ADSB) {
+    // 17: // Extended squitter
+    // 18: // Extended squitter/non-transponder
+    if (df == DF_ADSB) {
         uint8_t msg_type = frame.get_msg_type();
         uint8_t msg_sub = frame.get_msg_sub();
-        uint8_t* raw_data = frame.get_raw_data();
 
-        // 4: // surveillance, altitude reply
-        if ((msg_type >= AIRCRAFT_ID_L) && (msg_type <= AIRCRAFT_ID_H)) {
+        // transmitted when horizontal position information is not available but altitude information is available
+        if (msg_type == 0) {
+            // Q-bit must be present
+            if (raw_data[5] & 1) {
+                int altitude = ((((raw_data[5] & 0xFE) << 3) | ((raw_data[6] & 0xF0) >> 4)) * 25) - 1000;
+
+                log_entry.pos.altitude = entry.pos.altitude = altitude;
+                log_entry.pos.alt_valid = entry.pos.alt_valid = true;
+            }
+        }
+        // 1-4: Aircraft identification
+        else if ((msg_type >= AIRCRAFT_ID_L) && (msg_type <= AIRCRAFT_ID_H)) {
             entry.set_callsign(decode_frame_id(frame));
             log_entry.callsign = entry.callsign;
         }
-
-        // 9:
-        // 18: // Extended squitter/non-transponder
-        // 21: // Comm-B, identity reply
-        // 20: // Comm-B, altitude reply
+        // 9-18: Airborne position (w/Baro Altitude)
+        // 20-22: Airborne position (w/GNSS Height)
         else if (((msg_type >= AIRBORNE_POS_BARO_L) && (msg_type <= AIRBORNE_POS_BARO_H)) ||
                  ((msg_type >= AIRBORNE_POS_GPS_L) && (msg_type <= AIRBORNE_POS_GPS_H))) {
             entry.set_frame_pos(frame, raw_data[6] & 4);
             log_entry.pos = entry.pos;
 
-            if (entry.pos.valid) {
+            if (entry.pos.pos_valid) {
                 std::string str_info =
                     "Alt:" + to_string_dec_int(entry.pos.altitude) +
                     " Lat:" + to_string_decimal(entry.pos.latitude, 2) +
                     " Lon:" + to_string_decimal(entry.pos.longitude, 2);
                 entry.set_info_string(std::move(str_info));
             }
-
+            // 19: Airborne velocities
         } else if (msg_type == AIRBORNE_VEL && msg_sub >= VEL_GND_SUBSONIC && msg_sub <= VEL_AIR_SUPERSONIC) {
             entry.set_frame_velo(frame);
             log_entry.vel = entry.velo;
@@ -485,11 +547,59 @@ void ADSBRxView::on_frame(const ADSBFrameMessage* message) {
         }
     }
 
-    logger->log(log_entry);
+    // 4: // surveillance, altitude reply
+    // 20: // Comm-B, altitude reply
+    // 21: // Comm-B, identity reply
+    if (df == 0 || df == 4 || df == 20) {  // Decode the 13 bit AC altitude field
+        uint8_t m_bit = raw_data[3] & (1 << 6);
+        uint8_t q_bit = raw_data[3] & (1 << 4);
+        int altitude = 0;
 
-    if (pmem::beep_on_packets()) {
-        baseband::request_audio_beep(1000, 24000, 60);
+        if (!m_bit) {     // units -> FEET
+            if (q_bit) {  // N is the 11 bit integer resulting from the removal of bit Q and M
+                int n = ((raw_data[2] & 31) << 6) |
+                        ((raw_data[3] & 0x80) >> 2) |
+                        ((raw_data[3] & 0x20) >> 1) |
+                        (raw_data[3] & 15);
+
+                // The final altitude is due to the resulting number multiplied by 25, minus 1000.
+                altitude = 25 * n - 1000;
+                if (altitude < 0)
+                    altitude = 0;
+            }  // else N is an 11 bit Gillham coded altitude
+        }
+
+        log_entry.pos.altitude = entry.pos.altitude = altitude;
+        log_entry.pos.alt_valid = entry.pos.alt_valid = true;
     }
+
+    if (df == 5 || df == 21 ||
+        (df == 17 && frame.get_msg_type() == 28 && frame.get_msg_sub() == 1)) {  // Decode the squawk code
+        uint8_t* s = (df == 17) ? raw_data + 5 : raw_data + 2;                   // calc start of the code
+        uint16_t sqwk{0};
+
+        sqwk = ((s[1] & 0x80) >> 5) | ((s[0] & 0x02) >> 0) | ((s[0] & 0x08) >> 3);  // A
+        sqwk *= 10;
+        sqwk += ((s[1] & 0x02) << 1) | ((s[1] & 0x08) >> 2) | ((s[1] & 0x20) >> 5);  // B
+        sqwk *= 10;
+        sqwk += ((s[0] & 0x01) << 2) | ((s[0] & 0x04) >> 1) | ((s[0] & 0x10) >> 4);  // C
+        sqwk *= 10;
+        sqwk += ((s[1] & 0x01) << 2) | ((s[1] & 0x04) >> 1) | ((s[1] & 0x10) >> 4);  // D
+
+        log_entry.sqwk = entry.sqwk = sqwk;
+    }
+
+    if (df == 20 || df == 21) {
+        if (raw_data[4] == 0x20) {  // try decode as BDS20
+            std::string callsign = decode_frame_id(frame);
+            if (callsign.find('#') == std::string::npos) {  // all chars OK
+                entry.set_callsign(callsign);
+                log_entry.callsign = callsign;
+            }
+        }
+    }
+
+    logger->log(log_entry);
 }
 
 void ADSBRxView::on_tick_second() {
@@ -544,7 +654,7 @@ void ADSBRxView::refresh_ui() {
             }
 
             // NB: current entry also gets a marker so it shows up if map is panned.
-            if (map_needs_update && entry.pos.valid && entry.state <= ADSBAgeState::Recent) {
+            if (map_needs_update && entry.pos.pos_valid && entry.state <= ADSBAgeState::Recent) {
                 map_needs_update = details_view->add_map_marker(entry);
             }
 

firmware/application/apps/ui_adsb_rx.hpp

@@ -95,8 +95,8 @@ struct AircraftRecentEntry {
     ADSBAgeState state{ADSBAgeState::Invalid};
     uint32_t age{0};  // In seconds
     uint32_t amp{0};
-    adsb_pos pos{false, 0, 0, 0};
-    adsb_vel velo{false, 0, 999, 0};
+    adsb_pos pos{false, false, 0, 0, 0};
+    adsb_vel velo{false, SPD_GND, 0, 999, 0};
     ADSBFrame frame_pos_even{};
     ADSBFrame frame_pos_odd{};
 
@@ -105,6 +105,7 @@ struct AircraftRecentEntry {
     std::string info_string{};
 
     uint8_t sil{0};  // Surveillance integrity level
+    uint16_t sqwk{0};
 
     AircraftRecentEntry(const uint32_t ICAO_address)
         : ICAO_address{ICAO_address} {
@@ -152,8 +153,8 @@ struct AircraftRecentEntry {
         age += delta;
 
         if (age < ADSBAgeLimit::Current)
-            state = pos.valid ? ADSBAgeState::Invalid
-                              : ADSBAgeState::Current;
+            state = pos.pos_valid ? ADSBAgeState::Current
+                                  : ADSBAgeState::Invalid;
 
         else if (age < ADSBAgeLimit::Recent)
             state = ADSBAgeState::Recent;
@@ -178,6 +179,7 @@ struct ADSBLogEntry {
     adsb_vel vel{};
     uint8_t vel_type{};
     uint8_t sil{};
+    uint16_t sqwk{};
 };
 
 // TODO: Make logging optional.
@@ -228,7 +230,7 @@ class ADSBRxAircraftDetailsView : public View {
         "-"};
 
     Text text_model{
-        {0 * 8, 6 * 16, 30 * 8, 16},
+        {0 * 8, 6 * 16, screen_width, 16},
         "-"};
 
     Text text_type{
@@ -236,19 +238,19 @@ class ADSBRxAircraftDetailsView : public View {
         "-"};
 
     Text text_number_of_engines{
-        {18 * 8, 8 * 16, 30 * 8, 16},
+        {18 * 8, 8 * 16, screen_width, 16},
         "-"};
 
     Text text_engine_type{
-        {0 * 8, 10 * 16, 30 * 8, 16},
+        {0 * 8, 10 * 16, screen_width, 16},
         "-"};
 
     Text text_owner{
-        {0 * 8, 12 * 16, 30 * 8, 16},
+        {0 * 8, 12 * 16, screen_width, 16},
         "-"};
 
     Text text_operator{
-        {0 * 8, 14 * 16, 30 * 8, 16},
+        {0 * 8, 14 * 16, screen_width, 16},
         "-"};
 
     Button button_close{
@@ -310,7 +312,7 @@ class ADSBRxDetailsView : public View {
         "-"};
 
     Text text_airline{
-        {0 * 8, 4 * 16, 30 * 8, 16},
+        {0 * 8, 4 * 16, screen_width, 16},
         "-"};
 
     Text text_country{
@@ -318,18 +320,18 @@ class ADSBRxDetailsView : public View {
         "-"};
 
     Text text_infos{
-        {0 * 8, 6 * 16, 30 * 8, 16},
+        {0 * 8, 6 * 16, screen_width, 16},
         "-"};
 
     Text text_info2{
-        {0 * 8, 7 * 16, 30 * 8, 16},
+        {0 * 8, 7 * 16, screen_width, 16},
         "-"};
 
     Text text_frame_pos_even{
-        {0 * 8, 14 * 16, 30 * 8, 16},
+        {0 * 8, 14 * 16, screen_width, 16},
         "-"};
     Text text_frame_pos_odd{
-        {0 * 8, 16 * 16, 30 * 8, 16},
+        {0 * 8, 16 * 16, screen_width, 16},
         "-"};
 
     Button button_aircraft_details{
@@ -440,7 +442,7 @@ class ADSBRxView : public View {
     };
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     MessageHandlerRegistration message_handler_frame{
         Message::ID::ADSBFrame,

firmware/application/apps/ui_aprs_rx.cpp

@@ -247,8 +247,8 @@ APRSTableView::APRSTableView(NavigationView& nav, Rect parent_rec)
 
     details_view.hidden(true);
 
-    recent_entries_view.set_parent_rect({0, 0, 240, 280});
-    details_view.set_parent_rect({0, 0, 240, 280});
+    recent_entries_view.set_parent_rect({0, 0, screen_width, screen_width - 40});
+    details_view.set_parent_rect({0, 0, screen_width, screen_width - 40});
 
     recent_entries_view.on_select = [this](const APRSRecentEntry& entry) {
         this->on_show_detail(entry);

firmware/application/apps/ui_aprs_rx.hpp

@@ -134,7 +134,7 @@ class APRSDetailsView : public View {
     bool send_updates{false};
 
     Console console{
-        {0, 0 * 16, 240, 224}};
+        {0, 0 * 16, screen_width, 224}};
 
     Button button_done{
         {160, 14 * 16, 8 * 8, 3 * 16},
@@ -220,7 +220,7 @@ class APRSRxView : public View {
         {21 * 8, 5, 6 * 8, 4}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     OptionsField options_region{
         {0 * 8, 0 * 8},
@@ -241,7 +241,7 @@ class APRSRxView : public View {
 
     // DEBUG
     RecordView record_view{
-        {0 * 8, 1 * 16, 30 * 8, 1 * 16},
+        {0 * 8, 1 * 16, screen_width, 1 * 16},
         u"AFS_????.WAV",
         aprs_dir,
         RecordView::FileType::WAV,
@@ -249,7 +249,7 @@ class APRSRxView : public View {
         4};
 
     Console console{
-        {0, 2 * 16, 240, 240}};
+        {0, 2 * 16, screen_width, screen_height - 80}};
 
     std::unique_ptr<APRSLogger> logger{};
 };
@@ -265,7 +265,7 @@ class APRSRXView : public View {
 
    private:
     NavigationView& nav_;
-    Rect view_rect = {0, 3 * 8, 240, 280};
+    Rect view_rect = {0, 3 * 8, screen_width, screen_height - 40};
 
     APRSRxView view_stream{nav_, view_rect};
     APRSTableView view_table{nav_, view_rect};

firmware/application/apps/ui_aprs_tx.hpp

@@ -91,7 +91,7 @@ class APRSTXView : public View {
         ' '};
 
     Text text_payload{
-        {0 * 8, 5 * 16, 30 * 8, 16},
+        {0 * 8, 5 * 16, screen_width, 16},
         "-"};
     Button button_set{
         {0 * 8, 6 * 16, 80, 32},

firmware/application/apps/ui_battinfo.hpp

@@ -90,7 +90,7 @@ class BattinfoView : public View {
         "-"};
 
     Text text_warn{
-        {1 * 8, 8 * 16, 30 * 8, 2 * 16},
+        {1 * 8, 8 * 16, screen_width, 2 * 16},
         ""}; */
 
     Button button_mode{

firmware/application/apps/ui_bht_tx.hpp

@@ -189,7 +189,7 @@ class BHTView : public View {
 
     tx_modes tx_mode = IDLE;
 
-    Rect view_rect = {0, 3 * 8, 240, 176};
+    Rect view_rect = {0, 3 * 8, screen_width, 176};
 
     XylosView view_xylos{view_rect};
     EPARView view_EPAR{view_rect};
@@ -218,7 +218,7 @@ class BHTView : public View {
         ' '};
 
     ProgressBar progressbar{
-        {0 * 8, 29 * 8, 30 * 8, 16},
+        {0 * 8, 29 * 8, screen_width, 16},
     };
 
     TransmitterView tx_view{

firmware/application/apps/ui_bmp_file_viewer.hpp

@@ -42,7 +42,7 @@ class BMPFileViewer : public View {
    private:
     NavigationView& nav_;
     std::filesystem::path path_{};
-    BMPViewer bmp{{0, 0, 240, 320}};
+    BMPViewer bmp{{0, 0, screen_width, screen_height}};
 };
 
 }  // namespace ui

firmware/application/apps/ui_btle_rx.hpp

@@ -78,11 +78,11 @@ class BTLERxView : public View {
         nav_};
 
     Button button_modem_setup{
-        {240 - 12 * 8, 1 * 16, 96, 24},
+        {screen_width - 12 * 8, 1 * 16, 96, 24},
         "Modem setup"};
 
     Console console{
-        {0, 4 * 16, 240, 240}};
+        {0, 4 * 16, screen_width, screen_height - 80}};
 
     MessageHandlerRegistration message_handler_packet{
         Message::ID::AFSKData,

firmware/application/apps/ui_debug.cpp

@@ -202,10 +202,10 @@ RegistersView::RegistersView(
     };
     button_done.on_select = [&nav](Button&) { nav.pop(); };
 
-    registers_widget.set_parent_rect({0, 48, 240, 192});
+    registers_widget.set_parent_rect({0, 48, screen_width, 192});
     registers_widget.set_page(0);
 
-    text_title.set_parent_rect({(240 - static_cast<int>(title.size()) * 8) / 2, 16,
+    text_title.set_parent_rect({(screen_width - static_cast<int>(title.size()) * 8) / 2, 16,
                                 static_cast<int>(title.size()) * 8, 16});
     text_title.set(title);
 
@@ -482,7 +482,7 @@ DebugPmemView::DebugPmemView(NavigationView& nav)
     : registers_widget(RegistersWidgetConfig{CT_PMEM, PMEM_SIZE_BYTES, page_size, 8}) {
     add_children({&registers_widget, &text_checksum, &text_checksum2, &button_ok});
 
-    registers_widget.set_parent_rect({0, 32, 240, 192});
+    registers_widget.set_parent_rect({0, 32, screen_width, 192});
 
     text_checksum.set("Size: " + to_string_dec_uint(portapack::persistent_memory::data_size(), 3) + "  CRC: " + to_string_hex(portapack::persistent_memory::pmem_stored_checksum(), 8));
     text_checksum2.set("Calculated CRC: " + to_string_hex(portapack::persistent_memory::pmem_calculated_checksum(), 8));

firmware/application/apps/ui_debug.hpp

@@ -283,7 +283,7 @@ class DebugMemoryDumpView : public View {
         "Write"};
 
     Button button_done{
-        {128, 240, 96, 24},
+        {128, screen_height - 80, 96, 24},
         "Done"};
 
     Labels labels{
@@ -332,7 +332,7 @@ class DebugPmemView : public View {
     Text text_checksum2{{16, 248, 208, 16}};
 
     Button button_ok{
-        {240 / 3, 270, 240 / 3, 24},
+        {screen_width / 3, 270, screen_width / 3, 24},
         "OK",
     };
 
@@ -364,7 +364,7 @@ public:
 
 private:
         Console console {
-                { 8, 16, 224, 240 }
+                { 8, 16, 224, screen_height-80 }
         };
 
         Button button_exit {

firmware/application/apps/ui_encoders.hpp

@@ -124,7 +124,7 @@ class EncodersConfigView : public View {
         ""};
 
     Waveform waveform{
-        {0, 17 * 8, 240, 32},
+        {0, 17 * 8, screen_width, 32},
         waveform_buffer,
         0,
         0,
@@ -201,7 +201,7 @@ class EncodersView : public View {
     void start_tx(const bool scan);
     void on_tx_progress(const uint32_t progress, const bool done);
 
-    Rect view_rect = {0, 4 * 8, 240, 168};
+    Rect view_rect = {0, 4 * 8, screen_width, 168};
 
     EncodersConfigView view_config{nav_, view_rect};
     EncodersScanView view_scan{nav_, view_rect};

firmware/application/apps/ui_external_module_view.hpp

@@ -84,7 +84,7 @@ class ExternalModuleView : public View {
     Text text_app5_name{{24, 160, 200, 16}};
 
     Button dummy{
-        {240, 0, 0, 0},
+        {screen_width, 0, 0, 0},
         ""};
 
     SignalToken signal_token_tick_second{};

firmware/application/apps/ui_fileman.cpp

@@ -455,7 +455,7 @@ FileLoadView::FileLoadView(
     add_children({&menu_view});
 
     // Resize menu view to fill screen
-    menu_view.set_parent_rect({0, 3 * 8, 240, 29 * 8});
+    menu_view.set_parent_rect({0, 3 * 8, screen_width, 29 * 8});
 
     refresh_list();
 

firmware/application/apps/ui_fileman.hpp

@@ -125,7 +125,7 @@ class FileManBaseView : public View {
     };
 
     MenuView menu_view{
-        {0, 2 * 8, 240, 26 * 8},
+        {0, 2 * 8, screen_width, 26 * 8},
         true};
 
     Button button_exit{
@@ -172,7 +172,7 @@ private:
         };
 
         Text text_path {
-                { 0 * 8, 2 * 16, 30 * 8, 16 },
+                { 0 * 8, 2 * 16, screen_width, 16 },
                 "",
         };
 
@@ -182,7 +182,7 @@ private:
         };
 
         Text text_name {
-                { 0 * 8, 7 * 16, 30 * 8, 16 },
+                { 0 * 8, 7 * 16, screen_width, 16 },
                 "",
         };
 

firmware/application/apps/ui_flash_utility.cpp

@@ -80,7 +80,7 @@ FlashUtilityView::FlashUtilityView(NavigationView& nav)
     add_children({&labels,
                   &menu_view});
 
-    menu_view.set_parent_rect({0, 3 * 8, 240, 33 * 8});
+    menu_view.set_parent_rect({0, 3 * 8, screen_width, 33 * 8});
 
     ensure_directory(apps_dir);
     ensure_directory(firmware_dir);

firmware/application/apps/ui_flash_utility.hpp

@@ -60,7 +60,7 @@ class FlashUtilityView : public View {
         {{4, 4}, "Select firmware to flash:", Theme::getInstance()->bg_darkest->foreground}};
 
     MenuView menu_view{
-        {0, 2 * 8, 240, 26 * 8},
+        {0, 2 * 8, screen_width, 26 * 8},
         true};
 
     std::filesystem::path extract_tar(std::filesystem::path::string_type path, ui::Painter& painter);  // extracts the tar file, and returns the firmware.bin path from it. empty string if no fw

firmware/application/apps/ui_freqman.cpp

@@ -45,7 +45,7 @@ using option_db_t = std::pair<std::string_view, int32_t>;
 using options_db_t = std::vector<option_db_t>;
 
 extern options_db_t freqman_modulations;
-extern options_db_t freqman_bandwidths[5];
+extern options_db_t freqman_bandwidths[6];
 // extern options_db_t freqman_steps; // now included via ui_receiver.hpp
 extern options_db_t freqman_steps_short;
 

firmware/application/apps/ui_freqman.hpp

@@ -100,7 +100,7 @@ class FrequencySaveView : public FreqManBaseView {
         {{0 * 8, 6 * 16}, "Description:", Theme::getInstance()->bg_darkest->foreground}};
 
     TextField field_description{
-        {0 * 8, 7 * 16, 30 * 8, 1 * 16},
+        {0 * 8, 7 * 16, screen_width, 1 * 16},
         ""};
 
     Button button_save{

firmware/application/apps/ui_iq_trim.cpp

@@ -34,6 +34,7 @@ namespace ui {
 
 IQTrimView::IQTrimView(NavigationView& nav)
     : nav_{nav} {
+    power_buckets_.resize(screen_width);
     add_children({
         &labels,
         &field_path,

firmware/application/apps/ui_iq_trim.hpp

@@ -96,7 +96,7 @@ class IQTrimView : public View {
 
     std::filesystem::path path_{};
     Optional<iq::CaptureInfo> info_{};
-    std::array<iq::PowerBuckets::Bucket, screen_width> power_buckets_{};
+    std::vector<iq::PowerBuckets::Bucket> power_buckets_{};
     TrimProgressUI progress_ui{};
 
     Labels labels{
@@ -112,7 +112,7 @@ class IQTrimView : public View {
     };
 
     TextField field_path{
-        {0 * 8, 1 * 16, 30 * 8, 1 * 16},
+        {0 * 8, 1 * 16, screen_width, 1 * 16},
         "Open File..."};
 
     Point pos_lines{0 * 8, 4 * 16};

firmware/application/apps/ui_looking_glass_app.cpp

@@ -94,10 +94,10 @@ void GlassView::get_max_power(const ChannelSpectrum& spectrum, uint8_t bin, uint
 rf::Frequency GlassView::get_freq_from_bin_pos(uint8_t pos) {
     rf::Frequency freq_at_pos = 0;
     if (mode == LOOKING_GLASS_SINGLEPASS) {
-        // starting from the middle, minus 8 ignored bin on each side. Since pos is [-120,120] after the (pos - 120), it's divided by SCREEN_W(240)/2 => 120
-        freq_at_pos = f_center_ini + ((pos - 120) * ((looking_glass_range - ((16 * looking_glass_range) / SPEC_NB_BINS)) / 2)) / (SCREEN_W / 2);
+        // starting from the middle, minus 8 ignored bin on each side. Since pos is [-120,120] after the (pos - 120), it's divided by screen_width(240)/2 => 120
+        freq_at_pos = f_center_ini + ((pos - 120) * ((looking_glass_range - ((16 * looking_glass_range) / SPEC_NB_BINS)) / 2)) / (screen_width / 2);
     } else
-        freq_at_pos = f_min + (2 * offset * each_bin_size) + (pos * looking_glass_range) / SCREEN_W;
+        freq_at_pos = f_min + (2 * offset * each_bin_size) + (pos * looking_glass_range) / screen_width;
     return freq_at_pos;
 }
 
@@ -122,7 +122,7 @@ void GlassView::reset_live_view() {
 
     // Clear screen in peak mode.
     if (live_frequency_view == 2)
-        display.fill_rectangle({{0, 108 + 16}, {SCREEN_W, SCREEN_H - (108 + 16)}}, {0, 0, 0});
+        display.fill_rectangle({{0, 108 + 16}, {screen_width, screen_height - (108 + 16)}}, {0, 0, 0});
 }
 
 void GlassView::add_spectrum_pixel(uint8_t power) {
@@ -130,7 +130,7 @@ void GlassView::add_spectrum_pixel(uint8_t power) {
     spectrum_data[pixel_index] = (live_frequency_integrate * spectrum_data[pixel_index] + power) / (live_frequency_integrate + 1);  // smoothing
     pixel_index++;
 
-    if (pixel_index == SCREEN_W)  // got an entire waterfall line
+    if (pixel_index == screen_width)  // got an entire waterfall line
     {
         if (live_frequency_view > 0) {
             constexpr int rssi_sample_range = SPEC_NB_BINS;
@@ -140,22 +140,22 @@ void GlassView::add_spectrum_pixel(uint8_t power) {
             constexpr int raw_min = rssi_sample_range * rssi_voltage_min / adc_voltage_max;
             constexpr int raw_max = rssi_sample_range * rssi_voltage_max / adc_voltage_max;
             constexpr int raw_delta = raw_max - raw_min;
-            const range_t<int> y_max_range{0, 320 - (108 + 16)};
+            const range_t<int> y_max_range{0, screen_height - (108 + 16)};
 
             // drawing and keeping track of max freq
-            for (uint16_t xpos = 0; xpos < SCREEN_W; xpos++) {
+            for (uint16_t xpos = 0; xpos < screen_width; xpos++) {
                 // save max powerwull freq
                 if (spectrum_data[xpos] > max_freq_power) {
                     max_freq_power = spectrum_data[xpos];
                     max_freq_hold = get_freq_from_bin_pos(xpos);
                 }
-                int16_t point = y_max_range.clip(((spectrum_data[xpos] - raw_min) * (320 - (108 + 16))) / raw_delta);
+                int16_t point = y_max_range.clip(((spectrum_data[xpos] - raw_min) * (screen_height - (108 + 16))) / raw_delta);
                 uint8_t color_gradient = (point * 255) / 212;
                 // clear if not in peak view
                 if (live_frequency_view != 2) {
-                    display.fill_rectangle({{xpos, 108 + 16}, {1, SCREEN_H - point}}, {0, 0, 0});
+                    display.fill_rectangle({{xpos, 108 + 16}, {1, screen_height - point}}, {0, 0, 0});
                 }
-                display.fill_rectangle({{xpos, SCREEN_H - point}, {1, point}}, {color_gradient, 0, uint8_t(255 - color_gradient)});
+                display.fill_rectangle({{xpos, screen_height - point}, {1, point}}, {color_gradient, 0, uint8_t(255 - color_gradient)});
             }
             if (last_max_freq != max_freq_hold) {
                 last_max_freq = max_freq_hold;
@@ -163,7 +163,7 @@ void GlassView::add_spectrum_pixel(uint8_t power) {
             }
             plot_marker(marker_pixel_index);
         } else {
-            display.draw_pixels({{0, display.scroll(1)}, {SCREEN_W, 1}}, spectrum_row);  // new line at top, one less var, speedier
+            display.draw_pixels({{0, display.scroll(1)}, {screen_width, 1}}, spectrum_row);  // new line at top, one less var, speedier
         }
         pixel_index = 0;  // Start New cascade line
     }
@@ -199,7 +199,7 @@ bool GlassView::process_bins(uint8_t* powerlevel) {
 void GlassView::on_channel_spectrum(const ChannelSpectrum& spectrum) {
     baseband::spectrum_streaming_stop();
     // Convert bins of this spectrum slice into a representative max_power and when enough, into pixels
-    // we actually need SCREEN_W (240) of those bins
+    // we actually need screen_width (240) of those bins
     for (uint8_t bin = 0; bin < bin_length; bin++) {
         get_max_power(spectrum, bin, max_power);
         if (max_power > range_max_power)
@@ -238,7 +238,7 @@ void GlassView::on_hide() {
 }
 
 void GlassView::on_show() {
-    display.scroll_set_area(109, 319);  // Restart scroll on the correct coordinates
+    display.scroll_set_area(109, screen_height - 1);  // Restart scroll on the correct coordinates
     baseband::spectrum_streaming_start();
 }
 
@@ -253,11 +253,11 @@ void GlassView::on_range_changed() {
         // if the view is done in one pass, show it like in analog_audio_app
         mode = LOOKING_GLASS_SINGLEPASS;
         offset = 2;
-        bin_length = SCREEN_W;
+        bin_length = screen_width;
         ignore_dc = 0;
         looking_glass_bandwidth = looking_glass_range;
         looking_glass_sampling_rate = looking_glass_range;
-        each_bin_size = looking_glass_bandwidth / SCREEN_W;
+        each_bin_size = looking_glass_bandwidth / screen_width;
         looking_glass_step = looking_glass_bandwidth;
         f_center_ini = f_min + (looking_glass_bandwidth / 2);  // Initial center frequency for sweep
     } else {
@@ -269,7 +269,7 @@ void GlassView::on_range_changed() {
         if (mode == LOOKING_GLASS_FASTSCAN) {
             offset = 2;
             ignore_dc = 4;
-            bin_length = SCREEN_W;
+            bin_length = screen_width;
         } else {  // if( mode == LOOKING_GLASS_SLOWSCAN )
             offset = 2;
             bin_length = 80;
@@ -279,7 +279,7 @@ void GlassView::on_range_changed() {
         f_center_ini = f_min - (offset * each_bin_size) + (looking_glass_bandwidth / 2);  // Initial center frequency for sweep
     }
     search_span = looking_glass_range / MHZ_DIV;
-    marker_pixel_step = looking_glass_range / SCREEN_W;  // Each pixel value in Hz
+    marker_pixel_step = looking_glass_range / screen_width;  // Each pixel value in Hz
 
     pixel_index = 0;
     max_power = 0;
@@ -304,10 +304,10 @@ void GlassView::plot_marker(uint8_t pos) {
     {
         shift_y = 16;
     }
-    portapack::display.fill_rectangle({0, 100 + shift_y, SCREEN_W, 8}, Theme::getInstance()->bg_darkest->background);  // Clear old marker and whole marker rectangle btw
-    portapack::display.fill_rectangle({pos - 2, 100 + shift_y, 5, 3}, Theme::getInstance()->fg_red->foreground);       // Red marker top
-    portapack::display.fill_rectangle({pos - 1, 103 + shift_y, 3, 3}, Theme::getInstance()->fg_red->foreground);       // Red marker middle
-    portapack::display.fill_rectangle({pos, 106 + shift_y, 1, 2}, Theme::getInstance()->fg_red->foreground);           // Red marker bottom
+    portapack::display.fill_rectangle({0, 100 + shift_y, screen_width, 8}, Theme::getInstance()->bg_darkest->background);  // Clear old marker and whole marker rectangle btw
+    portapack::display.fill_rectangle({pos - 2, 100 + shift_y, 5, 3}, Theme::getInstance()->fg_red->foreground);           // Red marker top
+    portapack::display.fill_rectangle({pos - 1, 103 + shift_y, 3, 3}, Theme::getInstance()->fg_red->foreground);           // Red marker middle
+    portapack::display.fill_rectangle({pos, 106 + shift_y, 1, 2}, Theme::getInstance()->fg_red->foreground);               // Red marker bottom
 }
 
 void GlassView::update_min(int32_t v) {
@@ -358,7 +358,8 @@ GlassView::GlassView(
     NavigationView& nav)
     : nav_(nav) {
     baseband::run_image(portapack::spi_flash::image_tag_wideband_spectrum);
-
+    spectrum_row.resize(screen_width);
+    spectrum_data.resize(screen_width);
     if (!gradient.load_file(default_gradient_file)) {
         gradient.set_default();
     }
@@ -437,11 +438,11 @@ GlassView::GlassView(
                 freq_stats.hidden(true);
                 button_jump.hidden(true);
                 button_rst.hidden(true);
-                display.scroll_set_area(109, 319);  // Restart scroll on the correct coordinates.
+                display.scroll_set_area(109, screen_height - 1);  // Restart scroll on the correct coordinates.
                 break;
 
             case 1:  // LEVEL
-                display.fill_rectangle({{0, 108}, {SCREEN_W, 24}}, {0, 0, 0});
+                display.fill_rectangle({{0, 108}, {screen_width, 24}}, {0, 0, 0});
                 display.scroll_disable();
                 level_integration.hidden(false);
                 freq_stats.hidden(false);
@@ -451,7 +452,7 @@ GlassView::GlassView(
 
             case 2:  // PEAK
             default:
-                display.fill_rectangle({{0, 108}, {SCREEN_W, 24}}, {0, 0, 0});
+                display.fill_rectangle({{0, 108}, {screen_width, 24}}, {0, 0, 0});
                 display.scroll_disable();
                 level_integration.hidden(false);
                 freq_stats.hidden(false);
@@ -491,9 +492,9 @@ GlassView::GlassView(
 
     field_marker.on_encoder_change = [this](TextField&, EncoderEvent delta) {
         if ((marker_pixel_index + delta) < 0)
-            marker_pixel_index = marker_pixel_index + delta + SCREEN_W;
-        else if ((marker_pixel_index + delta) > SCREEN_W)
-            marker_pixel_index = marker_pixel_index + delta - SCREEN_W;
+            marker_pixel_index = marker_pixel_index + delta + screen_width;
+        else if ((marker_pixel_index + delta) > screen_width)
+            marker_pixel_index = marker_pixel_index + delta - screen_width;
         else
             marker_pixel_index = marker_pixel_index + delta;
         on_marker_change();
@@ -531,7 +532,7 @@ GlassView::GlassView(
     };
     set_spec_iq_phase_calibration_value(get_spec_iq_phase_calibration_value());  // initialize iq_phase_calibration in radio
 
-    display.scroll_set_area(109, 319);
+    display.scroll_set_area(109, screen_height - 1);  // Restart scroll on the correct coordinates
 
     // trigger:
     // Discord User jteich:  WidebandSpectrum::on_message to set the trigger value. In WidebandSpectrum::execute,
@@ -539,7 +540,7 @@ GlassView::GlassView(
     // at which time it pushes the buffer up with channel_spectrum.feed
     baseband::set_spectrum(looking_glass_bandwidth, trigger);
 
-    marker_pixel_index = SCREEN_W / 2;
+    marker_pixel_index = screen_width / 2;
     on_range_changed();  // Force a UI update.
 
     receiver_model.set_sampling_rate(looking_glass_sampling_rate);   // 20mhz

firmware/application/apps/ui_looking_glass_app.hpp

@@ -51,9 +51,6 @@ namespace ui {
 #define LOOKING_GLASS_SINGLEPASS 2
 // one spectrum line number of bins
 #define SPEC_NB_BINS 256
-// screen dimensions
-#define SCREEN_W 240
-#define SCREEN_H 320
 
 class GlassView : public View {
    public:
@@ -155,8 +152,8 @@ class GlassView : public View {
     uint8_t min_color_power{0};  // Filter cutoff level.
     uint32_t pixel_index{0};
 
-    std::array<Color, SCREEN_W> spectrum_row{};
-    std::array<uint8_t, SCREEN_W> spectrum_data{};
+    std::vector<Color> spectrum_row{};
+    std::vector<uint8_t> spectrum_data{};
     ChannelSpectrumFIFO* fifo{};
 
     int32_t steps = 1;
@@ -168,7 +165,7 @@ class GlassView : public View {
     rf::Frequency max_freq_hold = 0;
     rf::Frequency last_max_freq = 0;
     int16_t max_freq_power = -1000;
-    uint8_t bin_length = SCREEN_W;
+    uint8_t bin_length = screen_width;
     uint8_t offset = 0;
     uint8_t ignore_dc = 0;
 
@@ -222,7 +219,7 @@ class GlassView : public View {
         {}};
 
     ButtonWithEncoder button_beep_squelch{
-        {240 - 8 * 8, 2 * 16 + 4, 8 * 8, 1 * 8},
+        {screen_width - 8 * 8, 2 * 16 + 4, 8 * 8, 1 * 8},
         ""};
 
     TextField field_marker{
@@ -293,15 +290,15 @@ class GlassView : public View {
         }};
 
     Button button_jump{
-        {SCREEN_W - 4 * 8, 5 * 16, 4 * 8, 16},
+        {screen_width - 4 * 8, 5 * 16, 4 * 8, 16},
         "JMP"};
 
     Button button_rst{
-        {SCREEN_W - 9 * 8, 5 * 16, 4 * 8, 16},
+        {screen_width - 9 * 8, 5 * 16, 4 * 8, 16},
         "RST"};
 
     Text freq_stats{
-        {0 * 8, 5 * 16, SCREEN_W - 10 * 8, 8},
+        {0 * 8, 5 * 16, screen_width - 10 * 8, 8},
         ""};
 
     MessageHandlerRegistration message_handler_spectrum_config{

firmware/application/apps/ui_mictx.cpp

@@ -202,7 +202,7 @@ void MicTXView::rxaudio(bool enable) {
                 receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
                 // receiver_model.set_nbfm_configuration(n); is called above, depending user's selection (8k5, 11k, 16k).
                 break;
-            case MIC_MOD_WFM:  // WFM, BW 200Khz aprox, or the two new addional BW filters (180k, 40k)
+            case MIC_MOD_WFM:  // WFM, BW 200Khz aprox, or the two new addional BW filters (180k, 80k)
                 baseband::run_image(portapack::spi_flash::image_tag_wfm_audio);
                 receiver_model.set_modulation(ReceiverModel::Mode::WidebandFMAudio);
                 // receiver_model.set_wfm_configuration(n); is called above, depending user's selection (200k, 180k, 0k).
@@ -300,7 +300,7 @@ void MicTXView::update_receiver_rxbw(void) {
             receiver_model.set_nbfm_configuration(rxbw_index);  // we are in NFM/FM case, we need to select proper NFM/FM RX channel filter, NFM BW 8K5(0), NFM BW 11K(1), FM BW 16K (2)
             break;
         case MIC_MOD_WFM:
-            receiver_model.set_wfm_configuration(rxbw_index);  // we are in WFM case, we need to select proper WFB RX BW filter, WFM BW 200K(0), WFM BW 180K(1), WFM BW 40K(2)
+            receiver_model.set_wfm_configuration(rxbw_index);  // we are in WFM case, we need to select proper WFB RX BW filter, WFM BW 200K(0), WFM BW 180K(1), WFM BW 80K(2)
             break;
         case MIC_MOD_AM:
             receiver_model.set_am_configuration(rxbw_index);  // we are in AM TX mode, we need to select proper AM full path config AM-9K filter. 0+0 =>AM-9K(0), 0+1=1 =>AM-6K(1),

firmware/application/apps/ui_mictx.hpp

@@ -350,7 +350,7 @@ class MicTXView : public View {
     };
 
     Button tx_button{
-        {10 * 8, 30 * 8, 10 * 8, 5 * 8},
+        {10 * 8, screen_width, 10 * 8, 5 * 8},
         "PTT TX",
         true};
 

firmware/application/apps/ui_playlist.hpp

@@ -107,7 +107,7 @@ class PlaylistView : public View {
     void handle_replay_thread_done(uint32_t return_code);
 
     Text text_filename{
-        {0 * 8, 0 * 16, 30 * 8, 16}};
+        {0 * 8, 0 * 16, screen_width, 16}};
 
     FrequencyField field_frequency{
         {0 * 8, 1 * 16}};
@@ -139,13 +139,13 @@ class PlaylistView : public View {
         true};
 
     ImageButton button_play{
-        {28 * 8, 2 * 16, 2 * 8, 1 * 16},
+        {screen_width - 2 * 8, 2 * 16, 2 * 8, 1 * 16},
         &bitmap_play,
         Theme::getInstance()->fg_green->foreground,
         Theme::getInstance()->fg_green->background};
 
     Text text_track{
-        {0 * 8, 3 * 16, 30 * 8, 16}};
+        {0 * 8, 3 * 16, screen_width, 16}};
 
     NewButton button_prev{
         {2 * 8, 4 * 16, 4 * 8, 2 * 16},

firmware/application/apps/ui_pocsag_tx.hpp

@@ -122,10 +122,10 @@ class POCSAGTXView : public View {
         }};
 
     Text text_message{
-        {0 * 8, 16 * 8, 30 * 8, 16},
+        {0 * 8, 16 * 8, screen_width, 16},
         ""};
     Text text_message_l2{
-        {0 * 8, 18 * 8, 30 * 8, 16},
+        {0 * 8, 18 * 8, screen_width, 16},
         ""};
 
     Button button_message{

firmware/application/apps/ui_rds.hpp

@@ -160,7 +160,7 @@ class RDSView : public View {
 
     void start_tx();
 
-    Rect view_rect = {0, 8 * 8, 240, 192};
+    Rect view_rect = {0, 8 * 8, screen_width, 192};
 
     RDSPSNView view_PSN{nav_, view_rect};
     RDSRadioTextView view_radiotext{nav_, view_rect};

firmware/application/apps/ui_recon.cpp

@@ -335,7 +335,7 @@ ReconView::ReconView(NavigationView& nav)
     tx_view.hidden(true);
 
     // set record View
-    record_view = std::make_unique<RecordView>(Rect{0, 0, 30 * 8, 1 * 16},
+    record_view = std::make_unique<RecordView>(Rect{0, 0, screen_width, 1 * 16},
                                                u"AUTO_AUDIO", audio_dir,
                                                RecordView::FileType::WAV, 4096, 4);
     record_view->set_filename_date_frequency(true);
@@ -1164,18 +1164,18 @@ size_t ReconView::change_mode(freqman_index_t new_mod) {
     }
     if (new_mod == SPEC_MODULATION) {
         if (persistent_memory::recon_repeat_recorded()) {
-            record_view = std::make_unique<RecordView>(Rect{0, 0, 30 * 8, 1 * 16},
+            record_view = std::make_unique<RecordView>(Rect{0, 0, screen_width, 1 * 16},
                                                        u"RECON_REPEAT.C16", captures_dir,
                                                        RecordView::FileType::RawS16, 16384, 3);
             record_view->set_filename_as_is(true);
         } else {
-            record_view = std::make_unique<RecordView>(Rect{0, 0, 30 * 8, 1 * 16},
+            record_view = std::make_unique<RecordView>(Rect{0, 0, screen_width, 1 * 16},
                                                        u"AUTO_RAW", captures_dir,
                                                        RecordView::FileType::RawS16, 16384, 3);
             record_view->set_filename_date_frequency(true);
         }
     } else {
-        record_view = std::make_unique<RecordView>(Rect{0, 0, 30 * 8, 1 * 16},
+        record_view = std::make_unique<RecordView>(Rect{0, 0, screen_width, 1 * 16},
                                                    u"AUTO_AUDIO", audio_dir,
                                                    RecordView::FileType::WAV, 4096, 4);
         record_view->set_filename_date_frequency(true);
@@ -1404,8 +1404,8 @@ void ReconView::start_repeat() {
             std::string delay_message = "TX DELAY: " + to_string_dec_uint(delay) + "s";
 
             // update display information
-            p.fill_rectangle({0, (SCREEN_H / 2) - 16, SCREEN_W, 64}, Theme::getInstance()->fg_light->foreground);
-            p.draw_string({(SCREEN_W / 2) - 7 * 8, SCREEN_H / 2}, *Theme::getInstance()->fg_red, delay_message);
+            p.fill_rectangle({0, (screen_height / 2) - 16, screen_width, 64}, Theme::getInstance()->fg_light->foreground);
+            p.draw_string({(screen_width / 2) - 7 * 8, screen_height / 2}, *Theme::getInstance()->fg_red, delay_message);
 
             // sleep 1 second
             chThdSleepMilliseconds(1000);

firmware/application/apps/ui_recon.hpp

@@ -237,15 +237,15 @@ class ReconView : public View {
 
     Text file_name{
         // show file used
-        {0, 1 * 16, SCREEN_W, 16},
+        {0, 1 * 16, screen_width, 16},
     };
 
     Text desc_cycle{
-        {0, 2 * 16, SCREEN_W, 16},
+        {0, 2 * 16, screen_width, 16},
     };
 
     RSSI rssi{
-        {0 * 16, 3 * 16 + 2, SCREEN_W - 8 * 8 + 4, 12},
+        {0 * 16, 3 * 16 + 2, screen_width - 8 * 8 + 4, 12},
     };
 
     ButtonWithEncoder text_cycle{
@@ -285,15 +285,15 @@ class ReconView : public View {
 
     // Button can be RECON or SCANNER
     Button button_scanner_mode{
-        {SCREEN_W - 7 * 8, 3 * 16, 7 * 8, 28},
+        {screen_width - 7 * 8, 3 * 16, 7 * 8, 28},
         "RECON"};
 
     Button button_loop_config{
-        {SCREEN_W - 7 * 8, 5 * 16, 7 * 8, 28},
+        {screen_width - 7 * 8, 5 * 16, 7 * 8, 28},
         "[LOOP]"};
 
     Button button_config{
-        {SCREEN_W - 7 * 8, 7 * 16, 7 * 8, 28},
+        {screen_width - 7 * 8, 7 * 16, 7 * 8, 28},
         "CONFIG"};
 
     ButtonWithEncoder button_manual_start{
@@ -391,7 +391,7 @@ class ReconView : public View {
         "<REMOVE>"};
 
     ProgressBar progressbar{
-        {0 * 8, SCREEN_H / 2 - 16, SCREEN_W, 32}};
+        {0 * 8, screen_height / 2 - 16, screen_width, 32}};
 
     TransmitterView2 tx_view{
         {11 * 8, 2 * 16},

firmware/application/apps/ui_recon_settings.hpp

@@ -57,10 +57,6 @@
 #define RECON_MIN_LOCK_DURATION 100   // have to be >= and a multiple of STATS_UPDATE_INTERVAL
 #define RECON_DEF_WAIT_DURATION 1000  // will be incremented/decremented by STATS_UPDATE_INTERVAL steps
 
-// screen size helper
-#define SCREEN_W 240
-// #define SCREEN_H 320
-
 // recon settings nb params
 #define RECON_SETTINGS_NB_PARAMS 7
 
@@ -219,7 +215,7 @@ class ReconSetupView : public View {
     std::string input_file{"RECON"};
     std::string output_file{"RECON_RESULTS"};
 
-    Rect view_rect{0, 3 * 8, SCREEN_W, 230};
+    Rect view_rect{0, 3 * 8, screen_width, 230};
 
     ReconSetupViewMain viewMain{nav_, view_rect, input_file, output_file};
     ReconSetupViewMore viewMore{nav_, view_rect};

firmware/application/apps/ui_settings.cpp

@@ -759,7 +759,7 @@ AppSettingsView::AppSettingsView(
     add_children({&labels,
                   &menu_view});
 
-    menu_view.set_parent_rect({0, 3 * 8, 240, 33 * 8});
+    menu_view.set_parent_rect({0, 3 * 8, screen_width, 33 * 8});
 
     ensure_directory(settings_dir);
 
@@ -810,30 +810,29 @@ SetDisplayView::SetDisplayView(NavigationView& nav) {
                   &field_fake_brightness,
                   &button_save,
                   &button_cancel,
-                  &checkbox_invert_switch,
+                  &checkbox_ips_screen_switch,
                   &checkbox_brightness_switch});
 
     field_fake_brightness.set_by_value(pmem::fake_brightness_level());
     checkbox_brightness_switch.set_value(pmem::apply_fake_brightness());
-    checkbox_invert_switch.set_value(pmem::config_lcd_inverted_mode());
+    checkbox_ips_screen_switch.set_value(pmem::config_lcd_normally_black());
 
     button_save.on_select = [&nav, this](Button&) {
         pmem::set_apply_fake_brightness(checkbox_brightness_switch.value());
         pmem::set_fake_brightness_level(field_fake_brightness.selected_index_value());
-        if (checkbox_invert_switch.value() != pmem::config_lcd_inverted_mode()) {
-            display.set_inverted(checkbox_invert_switch.value());
-            pmem::set_lcd_inverted_mode(checkbox_invert_switch.value());
+        if (checkbox_ips_screen_switch.value() != pmem::config_lcd_normally_black()) {
+            pmem::set_lcd_normally_black(checkbox_ips_screen_switch.value());
         }
         send_system_refresh();
         nav.pop();
     };
 
     // only enable invert OR fake brightness
-    checkbox_invert_switch.on_select = [this](Checkbox&, bool v) {
+    checkbox_ips_screen_switch.on_select = [this](Checkbox&, bool v) {
         if (v) checkbox_brightness_switch.set_value(false);
     };
     checkbox_brightness_switch.on_select = [this](Checkbox&, bool v) {
-        if (v) checkbox_invert_switch.set_value(false);
+        if (v) checkbox_ips_screen_switch.set_value(false);
     };
 
     button_cancel.on_select = [&nav, this](Button&) {

firmware/application/apps/ui_settings.hpp

@@ -713,7 +713,7 @@ class AppSettingsView : public View {
         {{0, 4}, "Select file to edit:", Theme::getInstance()->bg_darkest->foreground}};
 
     MenuView menu_view{
-        {0, 2 * 8, 240, 26 * 8},
+        {0, 2 * 8, screen_width, 26 * 8},
         true};
 };
 
@@ -762,6 +762,8 @@ class SetDisplayView : public View {
         {{1 * 8, 2 * 16}, "(has a small performance", Theme::getInstance()->fg_light->foreground},
         {{1 * 8, 3 * 16}, "impact when enabled).", Theme::getInstance()->fg_light->foreground},
         {{2 * 8, 8 * 16}, "Brightness:", Theme::getInstance()->fg_light->foreground},
+        {{2 * 8, 10 * 16}, "REBOOT TO APPLY SCREEN TYPE", Theme::getInstance()->fg_light->foreground},
+
     };
 
     OptionsField field_fake_brightness{
@@ -776,10 +778,10 @@ class SetDisplayView : public View {
         16,
         "Enable brightness adjust"};
 
-    Checkbox checkbox_invert_switch{
-        {1 * 8, 10 * 16},
+    Checkbox checkbox_ips_screen_switch{
+        {1 * 8, 12 * 16},
         23,
-        "Invert colors (For IPS)"};
+        "IPS Screen"};
 
     Button button_save{
         {2 * 8, 16 * 16, 12 * 8, 32},
@@ -945,7 +947,7 @@ class SetThemeView : public View {
 
     OptionsField options{
         {0 * 8, 4 * 16},
-        screen_width / 8,
+        (size_t)(screen_width / 8),
         {
             {"Default - Grey", 0},
             {"Yellow", 1},

firmware/application/apps/ui_sigfrx.cpp

@@ -57,7 +57,7 @@ void SIGFRXView::paint(Painter& painter) {
     uint8_t i, xp;
 
     // portapack::display.draw_bmp_from_bmp_hex_arr({0, 302-160}, fox_bmp);
-    portapack::display.fill_rectangle({0, 16, 240, 160 - 16}, Theme::getInstance()->bg_darkest->foreground);
+    portapack::display.fill_rectangle({0, 16, screen_width, 160 - 16}, Theme::getInstance()->bg_darkest->foreground);
     for (i = 0; i < 6; i++) {
         xp = sigfrx_marks[i * 3];
         painter.draw_string({(ui::Coord)sigfrx_marks[(i * 3) + 1], 144 - 20}, style_white, to_string_dec_uint(sigfrx_marks[(i * 3) + 2]));
@@ -66,7 +66,7 @@ void SIGFRXView::paint(Painter& painter) {
 }
 
 void SIGFRXView::on_channel_spectrum(const ChannelSpectrum& spectrum) {
-    portapack::display.fill_rectangle({0, 144, 240, 4}, Theme::getInstance()->bg_darkest->foreground);
+    portapack::display.fill_rectangle({0, 144, screen_width, 4}, Theme::getInstance()->bg_darkest->foreground);
 
     uint8_t xmax = 0, imax = 0;
     size_t i;

firmware/application/apps/ui_siggen.cpp

@@ -154,6 +154,13 @@ SigGenView::SigGenView(
         };
     };
 
+    tx_view.on_bandwidth_changed = [this]() {
+        // we don't protect here with auto_update because other field of tx_view obj isn't protected too
+        // to remains the design logic same
+
+        update_config();
+    };
+
     tx_view.on_start = [this]() {
         start_tx();
         tx_view.set_transmitting(true);
@@ -165,4 +172,4 @@ SigGenView::SigGenView(
     };
 }
 
-} /* namespace ui */
+} /* namespace ui */

firmware/application/apps/ui_sonde.hpp

@@ -120,7 +120,7 @@ class SondeView : public View {
         {21 * 8, 0, 6 * 8, 4}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     Checkbox check_log{
         {22 * 8, 8 * 16},

firmware/application/apps/ui_ss_viewer.cpp

@@ -58,7 +58,7 @@ void ScreenshotViewer::paint(Painter& painter) {
     }
 
     // Screenshots from PNGWriter are all this size.
-    if (file.size() != 232383) {
+    if ((file.size() != 232383 && screen_width == 240) || (screen_width == 320 && file.size() != 463743)) {
         show_invalid();
         return;
     }
@@ -66,7 +66,7 @@ void ScreenshotViewer::paint(Painter& painter) {
     constexpr size_t read_chunk = 80;  // NB: must be a factor of pixel_width.
     constexpr size_t buffer_size = sizeof(ColorRGB888) * read_chunk;
     uint8_t buffer[buffer_size];
-    std::array<Color, screen_width> pixel_data;
+    std::vector<Color> pixel_data(screen_width);
 
     // Seek past all the headers.
     file.seek(43);

firmware/application/apps/ui_subghzd.hpp

@@ -192,7 +192,7 @@ class SubGhzDRecentEntryDetailView : public View {
     Text text_id{{6 * 8, 2 * 16, 10 * 8, 16}, "?"};
 
     Console console{
-        {0, 4 * 16, 240, screen_height - (4 * 16) - 36}};
+        {0, 4 * 16, screen_width, screen_height - (4 * 16) - 36}};
 
     Labels labels{
         {{0 * 8, 0 * 16}, "Type:", Theme::getInstance()->fg_light->foreground},

firmware/application/apps/ui_test.cpp

@@ -99,8 +99,8 @@ void TestView::on_packet(const testapp::Packet& packet) {
     display.draw_pixel(Point(cur_x, 4 * 16 + (256 - ((raw_alt - cal_value) / 4))), Color::white());
 
     cur_x++;
-    if (cur_x >= 240) {
-        display.fill_rectangle(Rect(0, 5 * 16, 240, 256), Color::black());
+    if (cur_x >= screen_width) {
+        display.fill_rectangle(Rect(0, 5 * 16, screen_width, 256), Color::black());
         cur_x = 0;
     }
 

firmware/application/apps/ui_test.hpp

@@ -95,10 +95,10 @@ class TestView : public View {
     };
 
     Text text_debug_a{
-        {0 * 8, 4 * 16, 30 * 8, 16},
+        {0 * 8, 4 * 16, screen_width, 16},
         "..."};
     Text text_debug_b{
-        {0 * 8, 5 * 16, 30 * 8, 16},
+        {0 * 8, 5 * 16, screen_width, 16},
         "..."};
 
     Button button_cal{

firmware/application/apps/ui_weatherstation.hpp

@@ -149,7 +149,7 @@ class WeatherView : public View {
         {21 * 8, 0, 6 * 8, 4}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     RxFrequencyField field_frequency{
         {0 * 8, 0 * 16},

firmware/application/baseband_api.cpp

@@ -93,9 +93,9 @@ void NBFMConfig::apply(const uint8_t squelch_level) const {
 
 void WFMConfig::apply() const {
     const WFMConfigureMessage message{
-        decim_0,  // 	taps_200k_decim_0 , 	taps_180k_wfm_decim_0, taps_40k_wfm_decim_0
-        decim_1,  // 	taps_200k_decim_1 or 	taps_180k_wfm_decim_1, taps_40k_wfm_decim_1
-        taps_64_lp_156_198,
+        decim_0,             // 	Dynamic array 24 taps : taps_200k_decim_0 , 	taps_180k_wfm_decim_0, taps_80k_wfm_decim_0
+        decim_1,             // 	Dynamic array 16 taps : taps_200k_decim_1 or 	taps_180k_wfm_decim_1, taps_80k_wfm_decim_1
+        taps_64_lp_156_198,  // Fixed channel audio filter 15khz
         75000,
         audio_48k_hpf_30hz_config,
         audio_48k_deemph_2122_6_config};
@@ -103,6 +103,18 @@ void WFMConfig::apply() const {
     audio::set_rate(audio::Rate::Hz_48000);
 }
 
+void WFMAMConfig::apply() const {
+    const WFMAMConfigureMessage message{
+        decim_0,         // 	Fixed 24 taps array : taps_16k0_decim_0
+        decim_1,         // Dynamic  32 taps array : taps_80k_wfmam_decim_1, 38k_wfmam
+        taps_64_lp_bpf,  // Dynamic 64 taps array , to filter modulated DSB AM 2k4 carrier before demod. AM .(LPF / BPF)
+        17000,           // NOAA satellite tx , FM deviation = +-17Khz.
+        apt_audio_12k_notch_2k4_config,
+        apt_audio_12k_lpf_2000hz_config};
+    send_message(&message);
+    audio::set_rate(audio::Rate::Hz_12000);
+}
+
 void set_tone(const uint32_t index, const uint32_t delta, const uint32_t duration) {
     shared_memory.bb_data.tones_data.tone_defs[index].delta = delta;
     shared_memory.bb_data.tones_data.tone_defs[index].duration = duration;
@@ -310,6 +322,11 @@ void set_wefax_config(uint8_t lpm = 120, uint8_t ioc = 0) {
     send_message(&message);
 }
 
+void set_noaaapt_config() {
+    const NoaaAptRxConfigureMessage message{};
+    send_message(&message);
+}
+
 void set_siggen_tone(const uint32_t tone) {
     const SigGenToneMessage message{
         TONES_F2D(tone, TONES_SAMPLERATE)};

firmware/application/baseband_api.hpp

@@ -56,12 +56,20 @@ struct NBFMConfig {
 };
 
 struct WFMConfig {
-    const fir_taps_real<24> decim_0;  // To handle both WFM filters , 200k and 40K for NOAA APT
+    const fir_taps_real<24> decim_0;  // To handle all 3 WFM filters , 200k, 180k and 80K-
     const fir_taps_real<16> decim_1;
 
     void apply() const;
 };
 
+struct WFMAMConfig {
+    const fir_taps_real<24> decim_0;  // To handle WFM filter   BW=40K for NOAA APT
+    const fir_taps_real<32> decim_1;
+    const fir_taps_real<64> taps_64_lp_bpf;  // to handle dynamically  LPF / BPF .
+
+    void apply() const;
+};
+
 void set_tone(const uint32_t index, const uint32_t delta, const uint32_t duration);
 void set_tones_config(const uint32_t bw, const uint32_t pre_silence, const uint16_t tone_count, const bool dual_tone, const bool audio_out);
 void kill_tone();
@@ -93,6 +101,7 @@ void set_siggen_config(const uint32_t bw, const uint32_t shape, const uint32_t d
 void set_spectrum_painter_config(const uint16_t width, const uint16_t height, bool update, int32_t bw);
 void set_subghzd_config(uint8_t modulation, uint32_t sampling_rate);
 void set_wefax_config(uint8_t lpm, uint8_t ioc);
+void set_noaaapt_config();
 
 void request_roger_beep();
 void request_rssi_beep();

firmware/application/bitmap.hpp

@@ -2435,6 +2435,44 @@ static constexpr Bitmap bitmap_icon_new_file{
     {16, 16},
     bitmap_icon_new_file_data};
 
+static constexpr uint8_t bitmap_icon_noaa_data[] = {
+    0x1C,
+    0x80,
+    0x3C,
+    0x40,
+    0x78,
+    0x18,
+    0xF0,
+    0x20,
+    0xE0,
+    0x26,
+    0x00,
+    0x0F,
+    0x80,
+    0x0F,
+    0xC0,
+    0x07,
+    0xE1,
+    0x1B,
+    0xC5,
+    0x39,
+    0x95,
+    0x78,
+    0x35,
+    0xF0,
+    0x09,
+    0xE0,
+    0x72,
+    0xC0,
+    0x04,
+    0x00,
+    0x78,
+    0x00,
+};
+static constexpr Bitmap bitmap_icon_noaa{
+    {16, 16},
+    bitmap_icon_noaa_data};
+
 static constexpr uint8_t bitmap_icon_notepad_data[] = {
     0x0C,
     0x00,

firmware/application/external/acars_rx/acars_app.hpp

@@ -87,10 +87,10 @@ class ACARSAppView : public View {
         true};
 
     Console console{
-        {0, 3 * 16, 240, 256}};
+        {0, 3 * 16, screen_width, 256}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 1 * 16}};
+        {screen_width - 2 * 8, 1 * 16}};
 
     std::unique_ptr<ACARSLogger> logger{};
 

firmware/application/external/adsbtx/ui_adsb_tx.hpp

@@ -218,7 +218,7 @@ class ADSBTxView : public View {
     void start_tx();
     void generate_frames();
 
-    Rect view_rect = {0, 7 * 8, 240, 192};
+    Rect view_rect = {0, 7 * 8, screen_width, 192};
 
     ADSBPositionView view_position{nav_, view_rect};
     ADSBCallsignView view_callsign{nav_, view_rect};

firmware/application/external/afsk_rx/ui_afsk_rx.hpp

@@ -84,7 +84,7 @@ class AFSKRxView : public View {
         {21 * 8, 5, 6 * 8, 4}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     RxFrequencyField field_frequency{
         {0 * 8, 0 * 16},
@@ -105,7 +105,7 @@ class AFSKRxView : public View {
         LanguageHelper::currentMessages[LANG_MODEM_SETUP]};
 
     Console console{
-        {0, 4 * 16, 240, screen_width}};
+        {0, 4 * 16, screen_width, screen_width}};
 
     void on_data_afsk(const AFSKDataMessage& message);
 

firmware/application/external/analogtv/analog_tv_app.hpp

@@ -58,7 +58,7 @@ class AnalogTvView : public View {
     app_settings::SettingsManager settings_{
         "rx_tv", app_settings::Mode::RX};
 
-    const Rect options_view_rect{0 * 8, 1 * 16, 30 * 8, 1 * 16};
+    const Rect options_view_rect{0 * 8, 1 * 16, screen_width, 1 * 16};
     const Rect nbfm_view_rect{0 * 8, 1 * 16, 18 * 8, 1 * 16};
 
     RSSI rssi{

firmware/application/external/antenna_length/ui_whipcalc.hpp

@@ -86,7 +86,7 @@ class WhipCalcView : public View {
         {13 * 8, 4 * 16, 10 * 16, 16},
         "-"};
     Console console{
-        {0, 6 * 16, 240, 160}};
+        {0, 6 * 16, screen_width, 160}};
 
     Button button_exit{
         {72, 17 * 16, 96, 32},

firmware/application/external/blespam/ui_blespam.hpp

@@ -119,7 +119,7 @@ class BLESpamView : public View {
 
 #ifdef BLESPMUSECONSOLE
     Console console{
-        {0, 70, 240, 220}};
+        {0, 70, screen_width, 220}};
 #endif
     OptionsField options_atkmode{
         {0 * 8, 2 * 8},

firmware/application/external/breakout/ui_breakout.cpp

@@ -12,8 +12,8 @@ namespace ui::external_app::breakout {
 
 Ticker game_timer;
 
-int paddle_x = (SCREEN_WIDTH - PADDLE_WIDTH) / 2;
-float ball_x = SCREEN_WIDTH / 2;
+int paddle_x = 0;
+float ball_x = 0;
 float ball_y = GAME_AREA_BOTTOM - PADDLE_HEIGHT - BALL_SIZE - 1;
 float ball_dx = 1.5f;
 float ball_dy = -2.0f;
@@ -105,7 +105,7 @@ void game_timer_check() {
 }
 
 void init_game() {
-    paddle_x = (SCREEN_WIDTH - PADDLE_WIDTH) / 2;
+    paddle_x = (screen_width - PADDLE_WIDTH) / 2;
     score = 0;
     lives = 3;
     level = 1;
@@ -157,7 +157,7 @@ void draw_screen() {
 }
 
 void draw_borders() {
-    rect(0, GAME_AREA_TOP - 1, SCREEN_WIDTH, GAME_AREA_TOP, COLOR_BORDER);
+    rect(0, GAME_AREA_TOP - 1, screen_width, GAME_AREA_TOP, COLOR_BORDER);
 }
 
 void draw_bricks() {
@@ -218,14 +218,14 @@ void move_paddle_left() {
 }
 
 void move_paddle_right() {
-    if (paddle_x < SCREEN_WIDTH - PADDLE_WIDTH) {
+    if (paddle_x < screen_width - PADDLE_WIDTH) {
         fillrect(paddle_x, PADDLE_Y, paddle_x + PADDLE_WIDTH, PADDLE_Y + PADDLE_HEIGHT, COLOR_BACKGROUND);
         if (ball_attached) {
             fillrect(ball_x, ball_y, ball_x + BALL_SIZE, ball_y + BALL_SIZE, COLOR_BACKGROUND);
         }
 
         paddle_x += 10;
-        if (paddle_x > SCREEN_WIDTH - PADDLE_WIDTH) paddle_x = SCREEN_WIDTH - PADDLE_WIDTH;
+        if (paddle_x > screen_width - PADDLE_WIDTH) paddle_x = screen_width - PADDLE_WIDTH;
 
         if (ball_attached) {
             ball_x = paddle_x + (PADDLE_WIDTH / 2) - (BALL_SIZE / 2);
@@ -277,8 +277,8 @@ void update_game() {
     if (ball_x < 0) {
         ball_x = 0;
         ball_dx = -ball_dx;
-    } else if (ball_x > SCREEN_WIDTH - BALL_SIZE) {
-        ball_x = SCREEN_WIDTH - BALL_SIZE;
+    } else if (ball_x > screen_width - BALL_SIZE) {
+        ball_x = screen_width - BALL_SIZE;
         ball_dx = -ball_dx;
     }
 
@@ -381,7 +381,7 @@ void init_menu() {
     auto style_blue = *ui::Theme::getInstance()->fg_blue;
     auto style_cyan = *ui::Theme::getInstance()->fg_cyan;
 
-    int16_t screen_width = 240;
+    int16_t screen_width = ui::screen_width;
     int16_t title_x = (screen_width - 17 * 8) / 2;
     int16_t divider_width = 24 * 8;
     int16_t divider_x = (screen_width - divider_width) / 2;
@@ -428,7 +428,7 @@ void init_game_over() {
     auto style_red = *ui::Theme::getInstance()->fg_red;
     auto style_yellow = *ui::Theme::getInstance()->fg_yellow;
 
-    int16_t screen_width = 240;
+    // int16_t screen_width = screen_width;
     int16_t title_width = 9 * 8;
     int16_t title_x = (screen_width - title_width) / 2;
     int16_t score_text_width = (16 + std::to_string(score).length()) * 8;
@@ -484,6 +484,8 @@ void reset_game() {
 
 BreakoutView::BreakoutView(NavigationView& nav)
     : nav_{nav} {
+    paddle_x = (screen_width - PADDLE_WIDTH) / 2;
+    ball_x = screen_width / 2;
     add_children({&dummy});
     game_timer.attach(&game_timer_check, 1.0 / 60.0);
 }

firmware/application/external/breakout/ui_breakout.hpp

@@ -56,8 +56,6 @@ class Ticker {
     void detach();
 };
 
-#define SCREEN_WIDTH 240
-#define SCREEN_HEIGHT 320
 #define PADDLE_WIDTH 40
 #define PADDLE_HEIGHT 10
 #define BALL_SIZE 8
@@ -141,7 +139,7 @@ class BreakoutView : public View {
     NavigationView& nav_;
 
     Button dummy{
-        {240, 0, 0, 0},
+        {screen_width, 0, 0, 0},
         ""};
 
     MessageHandlerRegistration message_handler_frame_sync{

firmware/application/external/cvs_spam/cvs_spam.hpp

@@ -53,7 +53,7 @@ class CVSSpamView : public View {
     std::vector<std::filesystem::path> file_list{};
 
     MenuView menu_view{
-        {0, 0, 240, 180},
+        {0, 0, screen_width, 180},
         true};
 
     Text text_empty{
@@ -84,7 +84,7 @@ class CVSSpamView : public View {
         LanguageHelper::currentMessages[LANG_STOP]};
 
     ProgressBar progressbar{
-        {0, 256, 240, 44}};
+        {0, 256, screen_width, 44}};
 
     MessageHandlerRegistration message_handler_fifo_signal{
         Message::ID::RequestSignal,

firmware/application/external/debug_pmem/ui_debug_pmem.cpp

@@ -80,7 +80,7 @@ bool DebugDumpView::debug_dump_func() {
     pmem_dump_file.write_line("updown_converter: " + to_string_dec_int(config_updown_converter()));
     pmem_dump_file.write_line("updown_frequency_rx_correction: " + to_string_dec_int(config_freq_rx_correction_updown()));
     pmem_dump_file.write_line("updown_frequency_tx_correction: " + to_string_dec_int(config_freq_tx_correction_updown()));
-    pmem_dump_file.write_line("lcd_inverted_mode: " + to_string_dec_uint(config_lcd_inverted_mode()));
+    pmem_dump_file.write_line("lcd_normally_black: " + to_string_dec_uint(config_lcd_normally_black()));
     pmem_dump_file.write_line("converter_frequency_offset: " + to_string_dec_int(config_converter_freq()));
     pmem_dump_file.write_line("frequency_rx_correction: " + to_string_dec_uint(config_freq_rx_correction()));
     pmem_dump_file.write_line("frequency_tx_correction: " + to_string_dec_uint(config_freq_tx_correction()));
@@ -157,6 +157,9 @@ bool DebugDumpView::debug_dump_func() {
         case ReceiverModel::Mode::WidebandFMAudio:
             pmem_dump_file.write_line("modulation: Mode::WidebandFMAudio");
             break;
+        case ReceiverModel::Mode::WFMAudioAMApt:
+            pmem_dump_file.write_line("modulation: Mode::WFMAudioAMApt");
+            break;
         case ReceiverModel::Mode::SpectrumAnalysis:
             pmem_dump_file.write_line("modulation: Mode::SpectrumAnalysis");
             break;

firmware/application/external/debug_pmem/ui_debug_pmem.hpp

@@ -44,7 +44,7 @@ class DebugDumpView : public View {
     NavigationView& nav_;
 
     Text dump_output{
-        {0 * 8, 19 * 8, 30 * 8, 16},
+        {0 * 8, 19 * 8, screen_width, 16},
         ""};
 
     Button button_exit{

firmware/application/external/detector_rx/main.cpp

@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2023 Bernd Herzog
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "ui.hpp"
+#include "ui_detector_rx.hpp"
+#include "ui_navigation.hpp"
+#include "external_app.hpp"
+
+namespace ui::external_app::detector_rx {
+void initialize_app(ui::NavigationView& nav) {
+    nav.push<DetectorRxView>();
+}
+}  // namespace ui::external_app::detector_rx
+
+extern "C" {
+
+__attribute__((section(".external_app.app_detector_rx.application_information"), used)) application_information_t _application_information_detector_rx = {
+    /*.memory_location = */ (uint8_t*)0x00000000,
+    /*.externalAppEntry = */ ui::external_app::detector_rx::initialize_app,
+    /*.header_version = */ CURRENT_HEADER_VERSION,
+    /*.app_version = */ VERSION_MD5,
+
+    /*.app_name = */ "Detector",
+    /*.bitmap_data = */
+    {
+        0x00,
+        0x00,
+        0x00,
+        0x00,
+        0x04,
+        0x20,
+        0x12,
+        0x48,
+        0x8A,
+        0x51,
+        0xCA,
+        0x53,
+        0xCA,
+        0x53,
+        0x8A,
+        0x51,
+        0x12,
+        0x48,
+        0x84,
+        0x21,
+        0xC0,
+        0x03,
+        0x40,
+        0x02,
+        0x60,
+        0x06,
+        0x20,
+        0x04,
+        0x30,
+        0x0C,
+        0xF0,
+        0x0F},
+    /*.icon_color = */ ui::Color::orange().v,
+    /*.menu_location = */ app_location_t::RX,
+    /*.desired_menu_position = */ -1,
+
+    // this has to be the biggest baseband used by the app. SPEC
+    /*.m4_app_tag = portapack::spi_flash::image_tag_nfm */ {'P', 'W', 'F', 'M'},
+    /*.m4_app_offset = */ 0x00000000,  // will be filled at compile time
+};
+}

firmware/application/external/detector_rx/ui_detector_rx.cpp

@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2018 Furrtek
+ * Copyright (C) 2023 gullradriel, Nilorea Studio Inc.
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "ui_detector_rx.hpp"
+#include "ui_fileman.hpp"
+#include "ui_freqman.hpp"
+#include "baseband_api.hpp"
+#include "file.hpp"
+#include "oversample.hpp"
+#include "ui_font_fixed_8x16.hpp"
+
+using namespace portapack;
+using namespace tonekey;
+using portapack::memory::map::backup_ram;
+
+namespace ui::external_app::detector_rx {
+
+// Function to map the value from one range to another
+int32_t DetectorRxView::map(int32_t value, int32_t fromLow, int32_t fromHigh, int32_t toLow, int32_t toHigh) {
+    return toLow + (value - fromLow) * (toHigh - toLow) / (fromHigh - fromLow);
+}
+
+void DetectorRxView::focus() {
+    field_lna.focus();
+}
+
+DetectorRxView::~DetectorRxView() {
+    // reset performance counters request to default
+    shared_memory.request_m4_performance_counter = 0;
+    receiver_model.disable();
+    audio::output::stop();
+    baseband::shutdown();
+}
+
+void DetectorRxView::on_timer() {
+    freq_index++;
+    if (freq_mode == 0 && freq_index >= tetra_uplink_monitoring_frequencies_hz.size()) freq_index = 0;  // TETRA UP
+    if (freq_mode == 1 && freq_index >= lora_monitoring_frequencies_hz.size()) freq_index = 0;          // Lora
+    if (freq_mode == 2 && freq_index >= remotes_monitoring_frequencies_hz.size()) freq_index = 0;       // Remotes
+
+    if (freq_mode == 2)
+        freq_ = remotes_monitoring_frequencies_hz[freq_index];
+    else if (freq_mode == 1)
+        freq_ = lora_monitoring_frequencies_hz[freq_index];
+    else
+        freq_ = tetra_uplink_monitoring_frequencies_hz[freq_index];
+    receiver_model.set_target_frequency(freq_);
+}
+
+DetectorRxView::DetectorRxView(NavigationView& nav)
+    : nav_{nav} {
+    add_children({
+        &labels,
+        &field_lna,
+        &field_vga,
+        &field_rf_amp,
+        &field_volume,
+        &text_frequency,
+        &freq_stats_rssi,
+        &freq_stats_db,
+        &text_beep_squelch,
+        &field_beep_squelch,
+        &rssi,
+        &rssi_graph,
+        &field_mode,
+    });
+
+    // activate vertical bar mode
+    rssi.set_vertical_rssi(true);
+
+    freq_ = receiver_model.target_frequency();
+
+    field_beep_squelch.set_value(beep_squelch);
+    field_beep_squelch.on_change = [this](int32_t v) {
+        beep_squelch = v;
+    };
+
+    rssi_graph.set_nb_columns(256);
+
+    change_mode();
+    rssi.set_peak(true, 3000);
+
+    // FILL STEP OPTIONS
+    freq_stats_rssi.set_style(Theme::getInstance()->bg_darkest);
+    freq_stats_db.set_style(Theme::getInstance()->bg_darkest);
+
+    field_mode.on_change = [this](size_t, int32_t value) {
+        freq_mode = value;
+        freq_index = 0;
+        switch (value) {
+            case 1:  // Lora
+                text_frequency.set("   433, 868, 915 Mhz");
+                break;
+            case 2:  // Remotes
+                text_frequency.set("        433, 315 Mhz");
+                break;
+            default:
+            case 0:  // TETRA UP
+                text_frequency.set("         380-390 Mhz");
+                break;
+        }
+    };
+}
+
+void DetectorRxView::on_statistics_update(const ChannelStatistics& statistics) {
+    static int16_t last_max_db = 0;
+    static uint8_t last_min_rssi = 0;
+    static uint8_t last_avg_rssi = 0;
+    static uint8_t last_max_rssi = 0;
+
+    rssi_graph.add_values(rssi.get_min(), rssi.get_avg(), rssi.get_max(), statistics.max_db);
+
+    // refresh db
+    if (last_max_db != statistics.max_db) {
+        last_max_db = statistics.max_db;
+        freq_stats_db.set("Power: " + to_string_dec_int(statistics.max_db) + " db");
+        rssi.set_db(statistics.max_db);
+    }
+    // refresh rssi
+    if (last_min_rssi != rssi_graph.get_graph_min() || last_avg_rssi != rssi_graph.get_graph_avg() || last_max_rssi != rssi_graph.get_graph_max()) {
+        last_min_rssi = rssi_graph.get_graph_min();
+        last_avg_rssi = rssi_graph.get_graph_avg();
+        last_max_rssi = rssi_graph.get_graph_max();
+        freq_stats_rssi.set("RSSI: " + to_string_dec_uint(last_min_rssi) + "/" + to_string_dec_uint(last_avg_rssi) + "/" + to_string_dec_uint(last_max_rssi));
+    }
+
+    if (statistics.max_db > beep_squelch) {
+        baseband::request_audio_beep(map(statistics.max_db, -100, 20, 400, 2600), 24000, 150);
+    }
+
+} /* on_statistic_updates */
+
+size_t DetectorRxView::change_mode() {
+    audio::output::stop();
+    receiver_model.disable();
+    baseband::shutdown();
+
+    audio_sampling_rate = audio::Rate::Hz_24000;
+    baseband::run_image(portapack::spi_flash::image_tag_capture);
+    receiver_model.set_modulation(ReceiverModel::Mode::Capture);
+
+    baseband::set_sample_rate(DETECTOR_BW, get_oversample_rate(DETECTOR_BW));
+    // The radio needs to know the effective sampling rate.
+    auto actual_sampling_rate = get_actual_sample_rate(DETECTOR_BW);
+    receiver_model.set_sampling_rate(actual_sampling_rate);
+    receiver_model.set_baseband_bandwidth(filter_bandwidth_for_sampling_rate(actual_sampling_rate));
+
+    audio::set_rate(audio_sampling_rate);
+    audio::output::start();
+    receiver_model.set_headphone_volume(receiver_model.headphone_volume());  // WM8731 hack.
+
+    receiver_model.enable();
+
+    return 0;
+}
+
+}  // namespace ui::external_app::detector_rx

firmware/application/external/detector_rx/ui_detector_rx.hpp

@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2018 Furrtek
+ * Copyright (C) 2023 gullradriel, Nilorea Studio Inc.
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _UI_DETECTOR_RX
+#define _UI_DETECTOR_RX
+
+#include "analog_audio_app.hpp"
+#include "app_settings.hpp"
+#include "audio.hpp"
+#include "baseband_api.hpp"
+#include "file.hpp"
+#include "freqman_db.hpp"
+#include "portapack_persistent_memory.hpp"
+#include "radio_state.hpp"
+#include "receiver_model.hpp"
+#include "string_format.hpp"
+#include "ui.hpp"
+#include "ui_mictx.hpp"
+#include "ui_receiver.hpp"
+#include "ui_spectrum.hpp"
+
+namespace ui::external_app::detector_rx {
+
+#define DETECTOR_BW 750000
+
+class DetectorRxView : public View {
+   public:
+    DetectorRxView(NavigationView& nav);
+    ~DetectorRxView();
+
+    void focus() override;
+
+    std::string title() const override { return "Detector RX"; };
+
+   private:
+    NavigationView& nav_;
+
+    RxRadioState radio_state_{};
+
+    int32_t map(int32_t value, int32_t fromLow, int32_t fromHigh, int32_t toLow, int32_t toHigh);
+    size_t change_mode();
+    void on_statistics_update(const ChannelStatistics& statistics);
+    void set_display_freq(int64_t freq);
+    void on_timer();
+
+    uint8_t freq_index = 0;
+    rf::Frequency freq_ = {433920000};
+    int32_t beep_squelch = 0;
+    audio::Rate audio_sampling_rate = audio::Rate::Hz_48000;
+    uint8_t freq_mode = 0;
+
+    app_settings::SettingsManager settings_{
+        "rx_detector",
+        app_settings::Mode::RX,
+        {
+            {"beep_squelch"sv, &beep_squelch},
+        }};
+
+    Labels labels{
+        {{UI_POS_X(0), UI_POS_Y(0)}, "LNA:   VGA:   AMP:  VOL:     ", Theme::getInstance()->fg_light->foreground}};
+
+    LNAGainField field_lna{
+        {UI_POS_X(4), UI_POS_Y(0)}};
+
+    VGAGainField field_vga{
+        {UI_POS_X(11), UI_POS_Y(0)}};
+
+    RFAmpField field_rf_amp{
+        {UI_POS_X(18), UI_POS_Y(0)}};
+
+    AudioVolumeField field_volume{
+        {UI_POS_X(24), UI_POS_Y(0)}};
+
+    OptionsField field_mode{
+        {UI_POS_X(0), UI_POS_Y(1)},
+        9,
+        {
+            {"TETRA UP", 0},
+            {"Lora", 1},
+            {"Remotes", 2},
+        }};
+
+    Text text_frequency{
+        {UI_POS_X_RIGHT(20), UI_POS_Y(1), UI_POS_WIDTH(20), UI_POS_DEFAULT_HEIGHT},
+        ""};
+
+    Text text_beep_squelch{
+        {UI_POS_X_RIGHT(9), UI_POS_Y(2), UI_POS_WIDTH(4), UI_POS_DEFAULT_HEIGHT},
+        "Bip>"};
+
+    NumberField field_beep_squelch{
+        {UI_POS_X_RIGHT(5), UI_POS_Y(2)},
+        4,
+        {-100, 20},
+        1,
+        ' ',
+    };
+
+    // RSSI: XX/XX/XXX
+    Text freq_stats_rssi{
+        {UI_POS_X(0), UI_POS_Y(2), UI_POS_WIDTH(15), UI_POS_DEFAULT_HEIGHT},
+    };
+
+    // Power: -XXX db
+    Text freq_stats_db{
+        {UI_POS_X(0), UI_POS_Y(3), UI_POS_WIDTH(15), UI_POS_DEFAULT_HEIGHT},
+    };
+
+    RSSIGraph rssi_graph{
+        {UI_POS_X(0), UI_POS_Y(5), UI_POS_WIDTH_REMAINING(5), UI_POS_HEIGHT_REMAINING(6)},
+    };
+
+    RSSI rssi{
+        {UI_POS_X_RIGHT(5), UI_POS_Y(5), UI_POS_WIDTH(5), UI_POS_HEIGHT_REMAINING(6)},
+    };
+
+    MessageHandlerRegistration message_handler_stats{
+        Message::ID::ChannelStatistics,
+        [this](const Message* const p) {
+            this->on_statistics_update(static_cast<const ChannelStatisticsMessage*>(p)->statistics);
+        }};
+
+    MessageHandlerRegistration message_handler_frame_sync{
+        Message::ID::DisplayFrameSync,
+        [this](const Message* const) {
+            this->on_timer();
+        }};
+
+    const std::vector<uint32_t> remotes_monitoring_frequencies_hz = {
+        // Around 315 MHz (common for older remotes, key fobs in some regions)
+        // Window centered on 315 MHz, covers 314.625 - 315.375 MHz
+        315000000,
+
+        // Around 433.92 MHz (very common for remotes, sensors, key fobs globally)
+        // Window centered on 433.92 MHz, covers 433.545 - 434.295 MHz
+        433920000,
+    };
+    const std::vector<uint32_t> lora_monitoring_frequencies_hz = {
+        // EU433 Band (Europe, typically 433.05 MHz to 434.79 MHz)
+        // Scanning the approximate range 433.0 MHz to 434.8 MHz with 750kHz steps
+        433375000,  // Covers 433.000 - 433.750 MHz
+        434125000,  // Covers 433.750 - 434.500 MHz (includes 433.92 MHz)
+        434875000,  // Covers 434.500 - 435.250 MHz (covers up to 434.79 MHz)
+
+        // EU868 Band (Europe, typically 863 MHz to 870 MHz, specific channels around 868 MHz)
+        // Targeting common LoRaWAN channel groups (approx 867.0 - 868.6 MHz) with 750kHz steps
+        867375000,  // Covers 867.000 - 867.750 MHz
+        868125000,  // Covers 867.750 - 868.500 MHz
+        868875000,  // Covers 868.500 - 869.250 MHz (covers up to 868.6 MHz)
+
+        // US915 Band (North America, typically 902 MHz to 928 MHz, specific channels around 915 MHz)
+        // Providing a few sample windows around the 915 MHz area with 750kHz steps.
+        // This band is wide; a full scan would require many more frequencies.
+        914250000,  // Covers 913.875 - 914.625 MHz
+        915000000,  // Covers 914.625 - 915.375 MHz (Centered on 915 MHz)
+        915750000,  // Covers 915.375 - 916.125 MHz
+    };
+    const std::vector<uint32_t> tetra_uplink_monitoring_frequencies_hz = {
+        // Band starts at 380,000,000 Hz, ends at 390,000,000 Hz.
+        // First center: 380,000,000 + 375,000 = 380,375,000 Hz
+        // Last center:  380,375,000 + 13 * 750,000 = 390,125,000 Hz (14 frequencies total for this band)
+        380375000,  // Covers 380.000 - 380.750 MHz
+        381125000,  // Covers 380.750 - 381.500 MHz
+        381875000,  // Covers 381.500 - 382.250 MHz
+        382625000,  // Covers 382.250 - 383.000 MHz
+        383375000,  // Covers 383.000 - 383.750 MHz
+        384125000,  // Covers 383.750 - 384.500 MHz
+        384875000,  // Covers 384.500 - 385.250 MHz
+        385625000,  // Covers 385.250 - 386.000 MHz
+        386375000,  // Covers 386.000 - 386.750 MHz
+        387125000,  // Covers 386.750 - 387.500 MHz
+        387875000,  // Covers 387.500 - 388.250 MHz
+        388625000,  // Covers 388.250 - 389.000 MHz
+        389375000,  // Covers 389.000 - 389.750 MHz
+        390125000,  // Covers 389.750 - 390.500 MHz
+    };
+};
+
+}  // namespace ui::external_app::detector_rx
+
+#endif

firmware/application/external/doom/ui_doom.cpp

@@ -12,11 +12,11 @@
 namespace ui::external_app::doom {
 
 //clang-format off
-#define SCREEN_WIDTH 240
-#define SCREEN_HEIGHT 320
-#define RENDER_HEIGHT 280
-#define HALF_WIDTH (SCREEN_WIDTH / 2)
-#define HALF_HEIGHT (RENDER_HEIGHT / 2)
+int SCREEN_WIDTH = 0;
+int SCREEN_HEIGHT = 0;
+int RENDER_HEIGHT = 0;
+int HALF_WIDTH = 0;
+int HALF_HEIGHT = 0;
 #define LEVEL_WIDTH_BASE 6
 #define LEVEL_WIDTH (1 << LEVEL_WIDTH_BASE)
 #define LEVEL_HEIGHT 57
@@ -1001,6 +1001,11 @@ void render_map(Painter& painter, bool full_clear, int16_t x_start = 0, int16_t
 
 DoomView::DoomView(NavigationView& nav)
     : nav_{nav} {
+    SCREEN_WIDTH = screen_width;
+    SCREEN_HEIGHT = screen_height;
+    RENDER_HEIGHT = screen_height - 40;
+    HALF_WIDTH = screen_width / 2;
+    HALF_HEIGHT = RENDER_HEIGHT / 2;
     add_children({&dummy});
     game_timer.attach(&game_timer_check, 1.0 / 60.0);
 }

firmware/application/external/doom/ui_doom.hpp

@@ -70,7 +70,7 @@ class DoomView : public View {
 
    private:
     NavigationView& nav_;
-    Button dummy{{240, 0, 0, 0}, ""};
+    Button dummy{{screen_width, 0, 0, 0}, ""};
     bool initialized{false};
     bool prev_velocity_moving{false};
     MessageHandlerRegistration message_handler_frame_sync{

firmware/application/external/external.cmake

@@ -111,6 +111,11 @@ set(EXTCPPSRC
 	external/wefax_rx/main.cpp
 	external/wefax_rx/ui_wefax_rx.cpp
 	
+	#noaaapt_rx
+	external/noaaapt_rx/main.cpp
+	external/noaaapt_rx/ui_noaaapt_rx.cpp
+		
+	
 
 	#shoppingcart_lock
 	external/shoppingcart_lock/main.cpp
@@ -207,6 +212,10 @@ set(EXTCPPSRC
 	#gfxEQ
 	external/gfxeq/main.cpp
 	external/gfxeq/ui_gfxeq.cpp	
+
+	#detector_rx
+	external/detector_rx/main.cpp
+	external/detector_rx/ui_detector_rx.cpp		
 )
 
 set(EXTAPPLIST
@@ -239,6 +248,7 @@ set(EXTAPPLIST
 	ookbrute
 	ook_editor
 	wefax_rx
+	noaaapt_rx
 	shoppingcart_lock
 	flippertx
 	remote
@@ -260,4 +270,5 @@ set(EXTAPPLIST
 	scanner
 	level
 	gfxeq
+	detector_rx
 )

firmware/application/external/external.ld

@@ -73,6 +73,8 @@ MEMORY
     ram_external_app_scanner    (rwx) : org = 0xADE00000, len = 32k
     ram_external_app_level      (rwx) : org = 0xADE10000, len = 32k
     ram_external_app_gfxeq      (rwx) : org = 0xADE20000, len = 32k
+    ram_external_app_noaaapt_rx   (rwx) : org = 0xADE30000, len = 32k
+    ram_external_app_detector_rx   (rwx) : org = 0xADE40000, len = 32k
 }
 
 SECTIONS
@@ -334,12 +336,19 @@ SECTIONS
         KEEP(*(.external_app.app_stopwatch.application_information));
         *(*ui*external_app*stopwatch*);
     } > ram_external_app_stopwatch
+    
    .external_app_wefax_rx : ALIGN(4) SUBALIGN(4)
     {
         KEEP(*(.external_app.app_wefax_rx.application_information));
         *(*ui*external_app*wefax_rx*);
     } > ram_external_app_wefax_rx
 
+   .external_app_noaaapt_rx : ALIGN(4) SUBALIGN(4)
+    {
+        KEEP(*(.external_app.app_noaaapt_rx.application_information));
+        *(*ui*external_app*noaaapt_rx*);
+    } > ram_external_app_noaaapt_rx
+
     .external_app_breakout : ALIGN(4) SUBALIGN(4)
     {
         KEEP(*(.external_app.app_breakout.application_information));
@@ -375,4 +384,13 @@ SECTIONS
         KEEP(*(.external_app.app_gfxeq.application_information));
         *(*ui*external_app*gfxeq*);
     } > ram_external_app_gfxeq
+
+    .external_app_detector_rx : ALIGN(4) SUBALIGN(4)
+    {
+        KEEP(*(.external_app.app_detector_rx.application_information));
+        *(*ui*external_app*detector_rx*);
+    } > ram_external_app_detector_rx
+
+
 }
+

firmware/application/external/extsensors/ui_extsensors.hpp

@@ -60,7 +60,7 @@ class ExtSensorsView : public View {
         {{0 * 8, 5 * 16}, "ORI:", Theme::getInstance()->fg_light->foreground},
         {{0 * 8, 7 * 16}, "ENV:", Theme::getInstance()->fg_light->foreground}};
 
-    Text text_info{{0 * 8, 0 * 8, 30 * 8, 16 * 1}, "Connect a compatible module..."};
+    Text text_info{{0 * 8, 0 * 8, screen_width, 16 * 1}, "Connect a compatible module..."};
     Text text_gps{{5 * 8, 3 * 16, 24 * 8, 16}, "-"};
     Text text_orientation{{5 * 8, 5 * 16, 24 * 8, 16}, "-"};
     Text text_envl1{{5 * 8, 7 * 16, 24 * 8, 16}, "-"};

firmware/application/external/fmradio/ui_fmradio.hpp

@@ -89,7 +89,7 @@ class FmRadioView : public View {
     RSSI rssi{
         {21 * 8, 0, 6 * 8, 4}};
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     RxFrequencyField field_frequency{
         {0 * 8, 0 * 16},
@@ -103,7 +103,7 @@ class FmRadioView : public View {
         {21 * 8, 10, 6 * 8, 4}};
 
     Waveform waveform{
-        {0, 20, 30 * 8, 2 * 16},
+        {0, 20, screen_width, 2 * 16},
         audio_spectrum,
         128,
         0,

firmware/application/external/foxhunt/ui_foxhunt_rx.hpp

@@ -62,7 +62,7 @@ class FoxhuntRxView : public View {
     RSSI rssi{
         {21 * 8, 0, 6 * 8, 4}};
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {screen_width - 2 * 8, 0 * 16}};
 
     RxFrequencyField field_frequency{
         {0 * 8, 0 * 16},
@@ -73,7 +73,7 @@ class FoxhuntRxView : public View {
         {0 * 8, 2 * 16 + 4, 14 * 8, 14},
     };
     RSSIGraph rssi_graph{
-        {0, 50, 240, 30},
+        {0, 50, screen_width, 30},
     };
 
     Button clear_markers{
@@ -84,7 +84,7 @@ class FoxhuntRxView : public View {
         {2, 18, 7 * 8, 16},
         "Mark"};
 
-    GeoMap geomap{{0, 80, 240, 240}};
+    GeoMap geomap{{0, 80, screen_width, screen_height - 80}};
 
     MessageHandlerRegistration message_handler_gps{
         Message::ID::GPSPosData,

firmware/application/external/gfxeq/main.cpp

@@ -29,8 +29,8 @@ __attribute__((section(".external_app.app_gfxeq.application_information"), used)
     ui::Color::green().v,
     app_location_t::RX,
     -1,
-    {'P', 'N', 'F', 'M'},
+    {'P', 'W', 'F', 'M'},
     0x00000000,
 };
 
-}  // namespace ui::external_app::gfxeq
+}  // namespace ui::external_app::gfxeq

firmware/application/external/gfxeq/ui_gfxeq.cpp

@@ -32,7 +32,7 @@ gfxEQView::gfxEQView(NavigationView& nav)
     baseband::run_image(portapack::spi_flash::image_tag_wfm_audio);
 
     receiver_model.set_modulation(ReceiverModel::Mode::WidebandFMAudio);
-    receiver_model.set_wfm_configuration(1);  // 200k => 0 , 180k => 1 , 40k => 2. Set to 1 or 2 for better reception
+    receiver_model.set_wfm_configuration(1);  // 200k => 0 , 180k => 1 , 80k => 2. Set to 1 or 2 for better reception
     receiver_model.set_sampling_rate(3072000);
     receiver_model.set_baseband_bandwidth(1750000);
 
@@ -165,12 +165,12 @@ void gfxEQView::render_equalizer(Painter& painter) {
 
         if (prev_bar_heights[bar] > active_segments) {
             int clear_height = (prev_bar_heights[bar] - active_segments) * SEGMENT_HEIGHT;
-            int clear_y = SCREEN_HEIGHT - prev_bar_heights[bar] * SEGMENT_HEIGHT;
+            int clear_y = screen_height - prev_bar_heights[bar] * SEGMENT_HEIGHT;
             painter.fill_rectangle({x, clear_y, BAR_WIDTH, clear_height}, Color(0, 0, 0));
         }
 
         for (int seg = 0; seg < active_segments; seg++) {
-            int y = SCREEN_HEIGHT - (seg + 1) * SEGMENT_HEIGHT;
+            int y = screen_height - (seg + 1) * SEGMENT_HEIGHT;
             if (y < header_height) break;
 
             Color segment_color = (seg >= active_segments - 2 && seg < active_segments) ? theme.peak_color : theme.base_color;
@@ -183,7 +183,7 @@ void gfxEQView::render_equalizer(Painter& painter) {
 
 void gfxEQView::paint(Painter& painter) {
     if (needs_background_redraw) {
-        painter.fill_rectangle({0, header_height, SCREEN_WIDTH, RENDER_HEIGHT}, Color(0, 0, 0));
+        painter.fill_rectangle({0, header_height, screen_width, RENDER_HEIGHT}, Color(0, 0, 0));
         needs_background_redraw = false;
     }
     render_equalizer(painter);

firmware/application/external/gfxeq/ui_gfxeq.hpp

@@ -40,12 +40,10 @@ class gfxEQView : public View {
 
    private:
     static constexpr ui::Dim header_height = 2 * 16;
-    static constexpr int SCREEN_WIDTH = 240;
-    static constexpr int SCREEN_HEIGHT = 320;
     static constexpr int RENDER_HEIGHT = 288;
     static constexpr int NUM_BARS = 11;
     static constexpr int BAR_SPACING = 2;
-    static constexpr int BAR_WIDTH = (SCREEN_WIDTH - (BAR_SPACING * (NUM_BARS - 1))) / NUM_BARS;
+    int BAR_WIDTH = (screen_width - (BAR_SPACING * (NUM_BARS - 1))) / NUM_BARS;
     static constexpr int HORIZONTAL_OFFSET = 2;
     static constexpr int SEGMENT_HEIGHT = 10;
 
@@ -101,7 +99,7 @@ class gfxEQView : public View {
     LNAGainField field_lna{{15 * 8, 0 * 16}};
     VGAGainField field_vga{{18 * 8, 0 * 16}};
     Button button_mood{{21 * 8, 0, 6 * 8, 16}, "MOOD"};
-    AudioVolumeField field_volume{{28 * 8, 0 * 16}};
+    AudioVolumeField field_volume{{screen_width - 2 * 8, 0 * 16}};
 
     rf::Frequency frequency_value{93100000};
 

firmware/application/external/gpssim/gps_sim_app.hpp

@@ -112,7 +112,7 @@ class GpsSimAppView : public View {
         LanguageHelper::currentMessages[LANG_LOOP],
         true};
     ImageButton button_play{
-        {28 * 8, 2 * 16, 2 * 8, 1 * 16},
+        {screen_width - 2 * 8, 2 * 16, 2 * 8, 1 * 16},
         &bitmap_play,
         Theme::getInstance()->fg_green->foreground,
         Theme::getInstance()->fg_green->background};

firmware/application/external/jammer/ui_jammer.cpp

@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
  * Copyright (C) 2016 Furrtek
+ * Copyright (C) 2025 RocketGod - Added modes from my Flipper Zero RF Jammer App - https://betaskynet.com
  *
  * This file is part of PortaPack.
  *
@@ -36,7 +37,6 @@ void RangeView::focus() {
 }
 
 void RangeView::update_start(rf::Frequency f) {
-    // Change everything except max
     frequency_range.min = f;
     button_start.set_text(to_string_short_freq(f));
 
@@ -48,7 +48,6 @@ void RangeView::update_start(rf::Frequency f) {
 }
 
 void RangeView::update_stop(rf::Frequency f) {
-    // Change everything except min
     frequency_range.max = f;
     button_stop.set_text(to_string_short_freq(f));
 
@@ -60,7 +59,6 @@ void RangeView::update_stop(rf::Frequency f) {
 }
 
 void RangeView::update_center(rf::Frequency f) {
-    // Change min/max/center, keep width
     center = f;
     button_center.set_text(to_string_short_freq(center));
 
@@ -75,7 +73,6 @@ void RangeView::update_center(rf::Frequency f) {
 }
 
 void RangeView::update_width(uint32_t w) {
-    // Change min/max/width, keep center
     width = w;
 
     button_width.set_text(to_string_short_freq(width));
@@ -91,7 +88,6 @@ void RangeView::update_width(uint32_t w) {
 }
 
 void RangeView::paint(Painter&) {
-    // Draw lines and arrows
     Rect r;
     Point p;
     Coord c;
@@ -162,7 +158,7 @@ RangeView::RangeView(NavigationView& nav) {
         auto load_view = nav.push<FrequencyLoadView>();
         load_view->on_frequency_loaded = [this](rf::Frequency value) {
             update_center(value);
-            update_width(100000);  // 100kHz default jamming bandwidth when loading unique frequency
+            update_width(100000);
         };
         load_view->on_range_loaded = [this](rf::Frequency start, rf::Frequency stop) {
             update_start(start);
@@ -193,10 +189,37 @@ void JammerView::set_jammer_channel(uint32_t i, uint32_t width, uint64_t center,
     jammer_channels[i].enabled = true;
     jammer_channels[i].width = (width * 0xFFFFFFULL) / 1536000;
     jammer_channels[i].center = center;
-    jammer_channels[i].duration = 30720 * duration;
+    jammer_channels[i].duration = duration ? 30720 * duration : 3000;
 }
 
 void JammerView::start_tx() {
+    if (update_config()) {
+        jamming = true;
+        button_transmit.set_style(&style_cancel);
+        button_transmit.set_text("STOP");
+
+        transmitter_model.set_rf_amp(field_amp.value());
+        transmitter_model.set_tx_gain(field_gain.value());
+        transmitter_model.set_baseband_bandwidth(28'000'000);
+        transmitter_model.enable();
+
+        baseband::set_jammer(true, (JammerType)options_type.selected_index(), options_speed.selected_index_value());
+        mscounter = 0;
+    }
+}
+
+void JammerView::stop_tx() {
+    button_transmit.set_style(&style_val);
+    button_transmit.set_text("START");
+    transmitter_model.disable();
+    baseband::set_jammer(false, JammerType::TYPE_FSK, 0);
+    jamming = false;
+    cooling = false;
+    seconds = 0;
+    mscounter = 0;
+}
+
+bool JammerView::update_config() {
     uint32_t c, i = 0;
     size_t num_channels;
     rf::Frequency start_freq, range_bw, range_bw_sub, ch_width;
@@ -204,24 +227,19 @@ void JammerView::start_tx() {
 
     size_t hop_value = options_hop.selected_index_value();
 
-    // Disable all channels by default
     for (c = 0; c < JAMMER_MAX_CH; c++)
         jammer_channels[c].enabled = false;
 
-    // Generate jamming channels with JAMMER_MAX_CH maximum width
-    // Convert ranges min/max to center/bw
     for (size_t r = 0; r < 3; r++) {
         if (range_views[r]->frequency_range.enabled) {
             range_bw = abs(range_views[r]->frequency_range.max - range_views[r]->frequency_range.min);
 
-            // Get lower bound
             if (range_views[r]->frequency_range.min < range_views[r]->frequency_range.max)
                 start_freq = range_views[r]->frequency_range.min;
             else
                 start_freq = range_views[r]->frequency_range.max;
 
             if (range_bw >= JAMMER_CH_WIDTH) {
-                // Split range in multiple channels
                 num_channels = 0;
                 range_bw_sub = range_bw;
 
@@ -241,7 +259,6 @@ void JammerView::start_tx() {
                     i++;
                 }
             } else {
-                // Range fits in a single channel
                 if (i >= JAMMER_MAX_CH) {
                     out_of_ranges = true;
                 } else {
@@ -254,43 +271,24 @@ void JammerView::start_tx() {
 
     if (!out_of_ranges && i) {
         text_range_total.set("/" + to_string_dec_uint(i, 2));
-
-        jamming = true;
-        button_transmit.set_style(&style_cancel);
-        button_transmit.set_text("STOP");
-
-        transmitter_model.set_rf_amp(field_amp.value());
-        transmitter_model.set_tx_gain(field_gain.value());
-        transmitter_model.set_baseband_bandwidth(28'000'000);  // Although tx is narrowband , let's use Max TX LPF .
-        transmitter_model.enable();
-
-        baseband::set_jammer(true, (JammerType)options_type.selected_index(), options_speed.selected_index_value());
-        mscounter = 0;  // euquiq: Reset internal ms counter for do_timer()
+        return true;
     } else {
         if (out_of_ranges)
             nav_.display_modal("Error", "Jamming bandwidth too large.\nMust be less than 24MHz.");
         else
             nav_.display_modal("Error", "No range enabled.");
+        return false;
     }
 }
 
-void JammerView::stop_tx() {
-    button_transmit.set_style(&style_val);
-    button_transmit.set_text("START");
-    transmitter_model.disable();
-    baseband::set_jammer(false, JammerType::TYPE_FSK, 0);
-    jamming = false;
-    cooling = false;
-}
-
-// called each 1/60th of second
 void JammerView::on_timer() {
-    if (++mscounter == 60) {
+    if (++mscounter >= 60) {
         mscounter = 0;
         if (jamming) {
+            int32_t timepause = field_timepause.value();
             if (cooling) {
-                if (++seconds >= field_timepause.value()) {                // Re-start TX
-                    transmitter_model.set_baseband_bandwidth(28'000'000);  // Although tx is narrowband , let's use Max TX LPF .
+                if (timepause == 0 || ++seconds >= timepause) {
+                    transmitter_model.set_baseband_bandwidth(28'000'000);
                     transmitter_model.enable();
                     button_transmit.set_text("STOP");
                     baseband::set_jammer(true, (JammerType)options_type.selected_index(), options_speed.selected_index_value());
@@ -306,8 +304,7 @@ void JammerView::on_timer() {
                     seconds = 0;
                 }
             } else {
-                if (++seconds >= field_timetx.value())  // Start cooling period:
-                {
+                if (timepause && ++seconds >= field_timetx.value()) {
                     transmitter_model.disable();
                     button_transmit.set_text("PAUSED");
                     baseband::set_jammer(false, JammerType::TYPE_FSK, 0);
@@ -327,11 +324,9 @@ void JammerView::on_timer() {
     }
 }
 
-JammerView::JammerView(
-    NavigationView& nav)
+JammerView::JammerView(NavigationView& nav)
     : nav_{nav} {
-    Rect view_rect = {0, 3 * 8, 240, 80};
-    // baseband::run_image(portapack::spi_flash::image_tag_jammer);
+    Rect view_rect = {0, 3 * 8, screen_width, 80};
     baseband::run_prepared_image(portapack::memory::map::m4_code.base());
 
     add_children({&tab_view,
@@ -355,15 +350,101 @@ JammerView::JammerView(
     view_range_b.set_parent_rect(view_rect);
     view_range_c.set_parent_rect(view_rect);
 
-    options_type.set_selected_index(3);   // Rand CW
-    options_speed.set_selected_index(3);  // 10kHz
-    options_hop.set_selected_index(1);    // 50ms
-    button_transmit.set_style(&style_val);
+    view_range_a.check_enabled.set_value(true);
+    view_range_a.frequency_range.enabled = true;
+    view_range_a.update_center(315'000'000);
+    view_range_a.update_width(1'000'000);
 
+    options_type.set_selected_index(3);
+    options_speed.set_selected_index(3);
+    options_hop.set_selected_index(0);
     field_timetx.set_value(30);
-    field_timepause.set_value(1);
+    field_timepause.set_value(0);
+    field_jitter.set_value(0);
     field_gain.set_value(transmitter_model.tx_gain());
     field_amp.set_value(transmitter_model.rf_amp());
+    button_transmit.set_style(&style_val);
+
+    options_type.on_change = [this](size_t, OptionsField::value_t) {
+        if (jamming) update_config();
+        if (jamming && !cooling) baseband::set_jammer(true, (JammerType)options_type.selected_index(), options_speed.selected_index_value());
+    };
+
+    options_speed.on_change = [this](size_t, OptionsField::value_t) {
+        if (jamming) update_config();
+        if (jamming && !cooling) baseband::set_jammer(true, (JammerType)options_type.selected_index(), options_speed.selected_index_value());
+    };
+
+    options_hop.on_change = [this](size_t, OptionsField::value_t) {
+        if (jamming) update_config();
+    };
+
+    field_timetx.on_change = [this](int32_t) {
+        if (jamming) update_config();
+    };
+
+    field_timepause.on_change = [this](int32_t) {
+        if (jamming) update_config();
+    };
+
+    field_jitter.on_change = [this](int32_t) {
+        if (jamming) update_config();
+    };
+
+    field_gain.on_change = [this](int32_t v) {
+        if (jamming) transmitter_model.set_tx_gain(v);
+    };
+
+    field_amp.on_change = [this](int32_t v) {
+        if (jamming) transmitter_model.set_rf_amp(v);
+    };
+
+    for (auto range_view : range_views) {
+        range_view->check_enabled.on_select = [this](Checkbox&, bool) {
+            if (jamming) update_config();
+        };
+        range_view->button_start.on_select = [this, range_view](Button&) {
+            auto new_view = nav_.push<FrequencyKeypadView>(range_view->frequency_range.min);
+            new_view->on_changed = [this, range_view](rf::Frequency f) {
+                range_view->update_start(f);
+                if (jamming) update_config();
+            };
+        };
+        range_view->button_stop.on_select = [this, range_view](Button&) {
+            auto new_view = nav_.push<FrequencyKeypadView>(range_view->frequency_range.max);
+            new_view->on_changed = [this, range_view](rf::Frequency f) {
+                range_view->update_stop(f);
+                if (jamming) update_config();
+            };
+        };
+        range_view->button_center.on_select = [this, range_view](Button&) {
+            auto new_view = nav_.push<FrequencyKeypadView>(range_view->center);
+            new_view->on_changed = [this, range_view](rf::Frequency f) {
+                range_view->update_center(f);
+                if (jamming) update_config();
+            };
+        };
+        range_view->button_width.on_select = [this, range_view](Button&) {
+            auto new_view = nav_.push<FrequencyKeypadView>(range_view->width);
+            new_view->on_changed = [this, range_view](rf::Frequency f) {
+                range_view->update_width(f);
+                if (jamming) update_config();
+            };
+        };
+        range_view->button_load_range.on_select = [this, range_view](Button&) {
+            auto load_view = nav_.push<FrequencyLoadView>();
+            load_view->on_frequency_loaded = [this, range_view](rf::Frequency value) {
+                range_view->update_center(value);
+                range_view->update_width(100000);
+                if (jamming) update_config();
+            };
+            load_view->on_range_loaded = [this, range_view](rf::Frequency start, rf::Frequency stop) {
+                range_view->update_start(start);
+                range_view->update_stop(stop);
+                if (jamming) update_config();
+            };
+        };
+    }
 
     button_transmit.on_select = [this](Button&) {
         if (jamming || cooling)

firmware/application/external/jammer/ui_jammer.hpp

@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
  * Copyright (C) 2016 Furrtek
+ * Copyright (C) 2025 RocketGod - Added modes from my Flipper Zero RF Jammer App - https://betaskynet.com
  *
  * This file is part of PortaPack.
  *
@@ -40,27 +41,12 @@ class RangeView : public View {
     RangeView(NavigationView& nav);
 
     void focus() override;
-    void paint(Painter&) override;
+    void paint(Painter& painter) override;
 
     jammer_range_t frequency_range{false, 0, 0};
-
-   private:
-    void update_start(rf::Frequency f);
-    void update_stop(rf::Frequency f);
-    void update_center(rf::Frequency f);
-    void update_width(uint32_t w);
-
     uint32_t width{};
     rf::Frequency center{};
 
-    const Style& style_info = *Theme::getInstance()->fg_medium;
-
-    Labels labels{
-        {{2 * 8, 8 * 8 + 4}, LanguageHelper::currentMessages[LANG_START], Theme::getInstance()->fg_light->foreground},
-        {{23 * 8, 8 * 8 + 4}, LanguageHelper::currentMessages[LANG_STOP], Theme::getInstance()->fg_light->foreground},
-        {{12 * 8, 5 * 8 - 4}, "Center", Theme::getInstance()->fg_light->foreground},
-        {{12 * 8 + 4, 13 * 8}, "Width", Theme::getInstance()->fg_light->foreground}};
-
     Checkbox check_enabled{
         {1 * 8, 4},
         12,
@@ -73,15 +59,32 @@ class RangeView : public View {
     Button button_start{
         {0 * 8, 11 * 8, 11 * 8, 28},
         ""};
+
     Button button_stop{
         {19 * 8, 11 * 8, 11 * 8, 28},
         ""};
+
     Button button_center{
         {76, 4 * 15 - 4, 11 * 8, 28},
         ""};
+
     Button button_width{
         {76, 8 * 15, 11 * 8, 28},
         ""};
+
+    void update_start(rf::Frequency f);
+    void update_stop(rf::Frequency f);
+    void update_center(rf::Frequency f);
+    void update_width(uint32_t w);
+
+   private:
+    const Style& style_info = *Theme::getInstance()->fg_medium;
+
+    Labels labels{
+        {{2 * 8, 8 * 8 + 4}, LanguageHelper::currentMessages[LANG_START], Theme::getInstance()->fg_light->foreground},
+        {{23 * 8, 8 * 8 + 4}, LanguageHelper::currentMessages[LANG_STOP], Theme::getInstance()->fg_light->foreground},
+        {{12 * 8, 5 * 8 - 4}, "Center", Theme::getInstance()->fg_light->foreground},
+        {{12 * 8 + 4, 13 * 8}, "Width", Theme::getInstance()->fg_light->foreground}};
 };
 
 class JammerView : public View {
@@ -109,15 +112,16 @@ class JammerView : public View {
     void start_tx();
     void on_timer();
     void stop_tx();
+    bool update_config();
     void set_jammer_channel(uint32_t i, uint32_t width, uint64_t center, uint32_t duration);
     void on_retune(const rf::Frequency freq, const uint32_t range);
 
     JammerChannel* jammer_channels = (JammerChannel*)shared_memory.bb_data.data;
     bool jamming{false};
-    bool cooling{false};     // euquiq: Indicates jammer in cooldown
-    uint16_t seconds = 0;    // euquiq: seconds counter for toggling tx / cooldown
-    int16_t mscounter = 0;   // euquiq: Internal ms counter for do_timer()
-    lfsr_word_t lfsr_v = 1;  // euquiq: Used to generate "random" Jitter
+    bool cooling{false};
+    uint16_t seconds{0};
+    int16_t mscounter{0};
+    lfsr_word_t lfsr_v{1};
 
     const Style& style_val = *Theme::getInstance()->fg_green;
     const Style& style_cancel = *Theme::getInstance()->fg_red;
@@ -139,8 +143,8 @@ class JammerView : public View {
         {{1 * 8, 25 * 8}, "Speed:", Theme::getInstance()->fg_light->foreground},
         {{3 * 8, 27 * 8}, "Hop:", Theme::getInstance()->fg_light->foreground},
         {{4 * 8, 29 * 8}, "TX:", Theme::getInstance()->fg_light->foreground},
-        {{1 * 8, 31 * 8}, "Sle3p:", Theme::getInstance()->fg_light->foreground},   // euquiq: Token of appreciation to TheSle3p, which made this ehnancement a reality with his bounty.
-        {{0 * 8, 33 * 8}, "Jitter:", Theme::getInstance()->fg_light->foreground},  // Maybe the repository curator can keep the "mystype" for some versions.
+        {{1 * 8, 31 * 8}, "Sleep:", Theme::getInstance()->fg_light->foreground},
+        {{0 * 8, 33 * 8}, "Jitter:", Theme::getInstance()->fg_light->foreground},
         {{11 * 8, 29 * 8}, "Secs.", Theme::getInstance()->fg_light->foreground},
         {{11 * 8, 31 * 8}, "Secs.", Theme::getInstance()->fg_light->foreground},
         {{11 * 8, 33 * 8}, "/60", Theme::getInstance()->fg_light->foreground},
@@ -150,12 +154,17 @@ class JammerView : public View {
     OptionsField options_type{
         {7 * 8, 23 * 8},
         8,
-        {
-            {"Rand FSK", 0},
-            {"FM tone", 1},
-            {"CW sweep", 2},
-            {"Rand CW", 3},
-        }};
+        {{"Rand FSK", 0},
+         {"FM tone", 1},
+         {"CW sweep", 2},
+         {"Noise", 3},
+         {"Sine", 4},
+         {"Square", 5},
+         {"Sawtooth", 6},
+         {"Triangle", 7},
+         {"Chirp", 8},
+         {"Gauss", 9},
+         {"Brute", 10}}};
 
     Text text_range_number{
         {16 * 8, 23 * 8, 2 * 8, 16},
@@ -176,7 +185,8 @@ class JammerView : public View {
     OptionsField options_hop{
         {7 * 8, 27 * 8},
         5,
-        {{"10ms ", 1},
+        {{"Off   ", 0},
+         {"10ms ", 1},
          {"50ms ", 5},
          {"100ms", 10},
          {"1s   ", 100},
@@ -195,7 +205,7 @@ class JammerView : public View {
     NumberField field_timepause{
         {8 * 8, 31 * 8},
         2,
-        {1, 60},
+        {0, 60},
         1,
         ' ',
     };
@@ -203,7 +213,7 @@ class JammerView : public View {
     NumberField field_jitter{
         {8 * 8, 33 * 8},
         2,
-        {1, 60},
+        {0, 60},
         1,
         ' ',
     };

firmware/application/external/level/main.cpp

@@ -77,8 +77,8 @@ __attribute__((section(".external_app.app_level.application_information"), used)
     /*.menu_location = */ app_location_t::RX,
     /*.desired_menu_position = */ -1,
 
-    // this has to be the biggest baseband used by the app. Level is using AM,WFM,NFM,AMFM,SPEC and NFM is the biggest
-    /*.m4_app_tag = portapack::spi_flash::image_tag_nfm */ {'P', 'N', 'F', 'M'},
+    // this has to be the biggest baseband used by the app. Level is using AM,WFM,NFM,AMFM,SPEC and WFM is the biggest
+    /*.m4_app_tag = portapack::spi_flash::image_tag_nfm */ {'P', 'W', 'F', 'M'},
     /*.m4_app_offset = */ 0x00000000,  // will be filled at compile time
 };
 }

firmware/application/external/level/ui_level.hpp

@@ -178,12 +178,12 @@ class LevelView : public View {
 
     RSSIGraph rssi_graph{
         // 240x320  =>
-        {0, 6 * 16 + 8, 240 - 5 * 8, 320 - (6 * 16)},
+        {0, 6 * 16 + 8, screen_width - 5 * 8, screen_height - (6 * 16)},
     };
 
     RSSI rssi{
         // 240x320  =>
-        {240 - 5 * 8, 6 * 16 + 8, 5 * 8, 320 - (6 * 16)},
+        {screen_width - 5 * 8, 6 * 16 + 8, 5 * 8, screen_height - (6 * 16)},
     };
 
     void handle_coded_squelch(const uint32_t value);

firmware/application/external/lge/lge_app.hpp

@@ -171,7 +171,7 @@ class LGEView : public View {
         '0'};
 
     Console console{
-        {0, 18 * 8, 30 * 8, 7 * 16}};
+        {0, 18 * 8, screen_width, 7 * 16}};
 
     TransmitterView tx_view{
         16 * 16,

firmware/application/external/mcu_temperature/mcu_temperature.hpp

@@ -72,16 +72,16 @@ class McuTemperatureView : public View {
 
    private:
     Text text_title{
-        {76, 16, 240, 16},
+        {76, 16, screen_width, 16},
         "Temperature",
     };
 
     McuTemperatureWidget temperature_widget{
-        {0, 40, 240, 180},
+        {0, 40, screen_width, 180},
     };
 
     Button button_done{
-        {72, 264, 96, 24},
+        {72, screen_height - 56, 96, 24},
         "Done"};
 };
 

firmware/application/external/noaaapt_rx/main.cpp

@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2025 HTotoo
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "ui.hpp"
+#include "ui_noaaapt_rx.hpp"
+#include "ui_navigation.hpp"
+#include "external_app.hpp"
+
+namespace ui::external_app::noaaapt_rx {
+void initialize_app(ui::NavigationView& nav) {
+    nav.push<NoaaAptRxView>();
+}
+}  // namespace ui::external_app::noaaapt_rx
+
+extern "C" {
+
+__attribute__((section(".external_app.app_noaaapt_rx.application_information"), used)) application_information_t _application_information_noaaapt_rx = {
+    /*.memory_location = */ (uint8_t*)0x00000000,
+    /*.externalAppEntry = */ ui::external_app::noaaapt_rx::initialize_app,
+    /*.header_version = */ CURRENT_HEADER_VERSION,
+    /*.app_version = */ VERSION_MD5,
+
+    /*.app_name = */ "NOAA APT",
+    /*.bitmap_data = */ {
+        0x1C,
+        0x80,
+        0x3C,
+        0x40,
+        0x78,
+        0x18,
+        0xF0,
+        0x20,
+        0xE0,
+        0x26,
+        0x00,
+        0x0F,
+        0x80,
+        0x0F,
+        0xC0,
+        0x07,
+        0xE1,
+        0x1B,
+        0xC5,
+        0x39,
+        0x95,
+        0x78,
+        0x35,
+        0xF0,
+        0x09,
+        0xE0,
+        0x72,
+        0xC0,
+        0x04,
+        0x00,
+        0x78,
+        0x00,
+    },
+    /*.icon_color = */ ui::Color::orange().v,
+    /*.menu_location = */ app_location_t::RX,
+    /*.desired_menu_position = */ -1,
+
+    /*.m4_app_tag = portapack::spi_flash::image_tag_noaaapt_rx */ {'P', 'N', 'O', 'A'},
+    /*.m4_app_offset = */ 0x00000000,  // will be filled at compile time
+};
+}

firmware/application/external/noaaapt_rx/ui_noaaapt_rx.cpp

@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2025 HTotoo
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or  modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/*
+TODOS LATER:
+ - add load data from wav file (maybe to a separate app, not this)
+ - AGC?!?
+ - Auto doppler correction
+ - fix and enable sync detection
+ - auto start / stop bmp save on each image
+*/
+
+#include "ui_noaaapt_rx.hpp"
+
+#include "audio.hpp"
+#include "rtc_time.hpp"
+#include "baseband_api.hpp"
+#include "string_format.hpp"
+#include "portapack_persistent_memory.hpp"
+#include "lcd_ili9341.hpp"
+
+using namespace portapack;
+using namespace modems;
+using namespace ui;
+
+namespace ui::external_app::noaaapt_rx {
+
+void NoaaAptRxView::focus() {
+    field_frequency.focus();
+}
+
+NoaaAptRxView::NoaaAptRxView(NavigationView& nav)
+    : nav_{nav} {
+    baseband::run_prepared_image(portapack::memory::map::m4_code.base());
+    add_children({&rssi,
+                  &field_rf_amp,
+                  &field_lna,
+                  &field_vga,
+                  &field_volume,
+                  &field_frequency,
+                  &txt_status,
+                  //&check_wav,  // enable this or the record view, but not both. yet it has some error, says "Invalid object" a lot. so disabled it
+                  //&record_view,  //
+                  &button_ss});
+
+    record_view.set_filename_date_frequency(true);
+    record_view.on_error = [&nav](std::string message) {
+        nav.display_modal("Error", message);
+    };
+    record_view.set_sampling_rate(12000);
+
+    field_frequency.set_step(100);
+    field_frequency.on_edit_shown = [this]() {
+        paused = true;
+    };
+    field_frequency.on_edit_hidden = [this]() {
+        paused = false;
+    };
+    audio::set_rate(audio::Rate::Hz_12000);
+    audio::output::start();
+    receiver_model.set_hidden_offset(NOAAAPT_FREQ_OFFSET);
+    receiver_model.set_baseband_bandwidth(1750000);
+    receiver_model.set_sampling_rate(3072000);
+    receiver_model.enable();
+    txt_status.set("Waiting for signal.");
+
+    button_ss.on_select = [this](Button&) {
+        if (bmp.is_loaded()) {
+            bmp.close();
+            button_ss.set_text(LanguageHelper::currentMessages[LANG_START]);
+            if (check_wav.value()) {
+                record_view.stop();
+            }
+            return;
+        }
+        if (check_wav.value()) {
+            record_view.start();
+        }
+        ensure_directory("/BMP");
+        bmp.create("/BMP/noaa_" + to_string_timestamp(rtc_time::now()) + ".bmp", NOAAAPT_PX_SIZE, 1);
+
+        button_ss.set_text(LanguageHelper::currentMessages[LANG_STOP]);
+    };
+    on_settings_changed();
+}
+
+NoaaAptRxView::~NoaaAptRxView() {
+    stopping = true;
+    receiver_model.set_hidden_offset(0);
+    bmp.close();
+    receiver_model.disable();
+    baseband::shutdown();
+    audio::output::stop();
+    record_view.stop();
+}
+
+void NoaaAptRxView::on_settings_changed() {
+    baseband::set_noaaapt_config();
+}
+
+void NoaaAptRxView::on_status(NoaaAptRxStatusDataMessage msg) {
+    (void)msg;
+    std::string tmp = "";
+    if (msg.state == 0) {
+        tmp = "Waiting for signal.";
+    } else if (msg.state == 1) {
+        tmp = "Synced.";
+    } else if (msg.state == 2) {
+        tmp = "Image arriving.";
+    }
+    txt_status.set(tmp);
+}
+
+// this stores and displays the image. keep it as simple as you can. a bit more complexity will kill the sync
+void NoaaAptRxView::on_image(NoaaAptRxImageDataMessage msg) {
+    if ((line_num) >= UI_POS_HEIGHT_REMAINING(NOAA_IMG_START_ROW)) line_num = 0;  // for draw reset
+
+    for (uint16_t i = 0; i < msg.cnt; i += 1) {
+        Color pxl = {msg.image[i], msg.image[i], msg.image[i]};
+        bmp.write_next_px(pxl);
+        line_in_part++;
+        if (line_in_part == NOAAAPT_PX_SIZE) {
+            line_in_part = 0;
+            line_num++;
+            bmp.expand_y_delta(1);
+        }
+
+        uint16_t xpos = line_in_part / (NOAAAPT_PX_SIZE / 240);
+        if (xpos >= 240) xpos = 239;
+        line_buffer[xpos] = pxl;
+        if ((line_in_part == 0)) {
+            portapack::display.render_line({0, line_num + NOAA_IMG_START_ROW * 16}, 240, line_buffer);
+        }
+    }
+}
+
+}  // namespace ui::external_app::noaaapt_rx

firmware/application/external/noaaapt_rx/ui_noaaapt_rx.hpp

@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2025 HTotoo
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __UI_noaaapt_RX_H__
+#define __UI_noaaapt_RX_H__
+
+#include "ui.hpp"
+#include "ui_language.hpp"
+#include "ui_navigation.hpp"
+#include "ui_receiver.hpp"
+#include "ui_geomap.hpp"
+#include "ui_freq_field.hpp"
+#include "ui_record_view.hpp"
+#include "app_settings.hpp"
+#include "radio_state.hpp"
+#include "log_file.hpp"
+#include "utility.hpp"
+#include "ui_fileman.hpp"
+#include "bmpfile.hpp"
+#include "file_path.hpp"
+
+using namespace ui;
+
+namespace ui::external_app::noaaapt_rx {
+
+#define NOAAAPT_PX_SIZE 2080
+
+#define NOAAAPT_FREQ_OFFSET 0
+
+#define NOAA_IMG_START_ROW 4
+
+class NoaaAptRxView : public View {
+   public:
+    NoaaAptRxView(NavigationView& nav);
+    ~NoaaAptRxView();
+
+    void focus() override;
+
+    std::string title() const override { return "NOAA APT"; };
+
+   private:
+    void on_settings_changed();
+    void on_status(NoaaAptRxStatusDataMessage msg);
+    void on_image(NoaaAptRxImageDataMessage msg);
+
+    bool stopping = false;
+
+    uint16_t line_num = 0;      // nth line
+    uint16_t line_in_part = 0;  // got multiple parts of a line, so keep track of it
+    uint8_t delayer = 0;
+    ui::Color line_buffer[240];
+    std::filesystem::path filetohandle = "";
+
+    bool paused = false;  // when freq field is shown for example, we need to pause
+
+    BMPFile bmp{};
+
+    NavigationView& nav_;
+    RxRadioState radio_state_{};
+    app_settings::SettingsManager settings_{
+        "rx_noaaapt",
+        app_settings::Mode::RX,
+        {}};
+
+    RFAmpField field_rf_amp{
+        {UI_POS_X(13), UI_POS_Y(0)}};
+    LNAGainField field_lna{
+        {UI_POS_X(15), UI_POS_Y(0)}};
+    VGAGainField field_vga{
+        {UI_POS_X(18), UI_POS_Y(0)}};
+    RSSI rssi{
+        {UI_POS_X(21), UI_POS_Y(0), UI_POS_WIDTH(6), 4}};
+    AudioVolumeField field_volume{
+        {UI_POS_X_RIGHT(2), UI_POS_Y(0)}};
+
+    RxFrequencyField field_frequency{
+        {UI_POS_X(0), UI_POS_Y(0)},
+        nav_};
+
+    RecordView record_view{
+        {UI_POS_X(0), UI_POS_Y(2), UI_POS_MAXWIDTH, UI_POS_DEFAULT_HEIGHT},
+        u"AUD",
+        u"AUDIO",
+        RecordView::FileType::WAV,
+        4096,
+        4};
+
+    Checkbox check_wav{
+        {UI_POS_X(0), UI_POS_Y(2)},
+        12,
+        "Save WAV too",
+        true};
+
+    Text txt_status{
+        {UI_POS_X(0), UI_POS_Y(1), UI_POS_WIDTH(20), UI_POS_DEFAULT_HEIGHT},
+    };
+
+    Button button_ss{
+        {UI_POS_X_RIGHT(6), UI_POS_Y(1), UI_POS_WIDTH(5), UI_POS_DEFAULT_HEIGHT},
+        LanguageHelper::currentMessages[LANG_START]};
+
+    MessageHandlerRegistration message_handler_stats{
+        Message::ID::NoaaAptRxStatusData,
+        [this](const Message* const p) {
+            if (stopping || paused) return;
+            const auto message = *reinterpret_cast<const NoaaAptRxStatusDataMessage*>(p);
+            on_status(message);
+        }};
+
+    MessageHandlerRegistration message_handler_image{
+        Message::ID::NoaaAptRxImageData,
+        [this](const Message* const p) {
+            if (stopping || paused) return;
+            const auto message = *reinterpret_cast<const NoaaAptRxImageDataMessage*>(p);
+            on_image(message);
+        }};
+};
+
+}  // namespace ui::external_app::noaaapt_rx
+
+#endif /*__UI_noaaapt_RX_H__*/

firmware/application/external/nrf_rx/ui_nrf_rx.hpp

@@ -77,11 +77,11 @@ class NRFRxView : public View {
         nav_};
 
     Button button_modem_setup{
-        {240 - 12 * 8, 1 * 16, 96, 24},
+        {screen_width - 12 * 8, 1 * 16, 96, 24},
         LanguageHelper::currentMessages[LANG_MODEM_SETUP]};
 
     Console console{
-        {0, 4 * 16, 240, 240}};
+        {0, 4 * 16, screen_width, screen_height - 80}};
 
     MessageHandlerRegistration message_handler_packet{
         Message::ID::AFSKData,

firmware/application/external/ook_editor/ui_ook_editor.hpp

@@ -109,7 +109,7 @@ class OOKEditorAppView : public View {
     Labels label_waveform{{{0, 188}, "Waveform:", Theme::getInstance()->fg_light->foreground}};
 
     // Text field to display the various status message of the app
-    Text text_app_status{{0, 160, 30 * 8, 16}, ""};
+    Text text_app_status{{0, 160, screen_width, 16}, ""};
 
     // OptionsField for selectable sample rates.
     OptionsField field_sample_rate{{96, 20}, 7, {{"250k", 250000U}, {"1M", 1000000U}, {"2M", 2000000U}, {"5M", 5000000U}, {"10M", 10000000U}, {"20M", 20000000U}}};
@@ -121,7 +121,7 @@ class OOKEditorAppView : public View {
     NumberField field_repeat{{210, 40}, 3, {1, 999}, 1, '0', false};
 
     // Text field to display the payload data.
-    Text text_payload{{0 * 8, 100, 30 * 8, 16}, ""};
+    Text text_payload{{0 * 8, 100, screen_width, 16}, ""};
 
     // Buttons for setting configurations, opening files, and starting transmission.
     Button button_set{{0, 125, 60, 28}, LanguageHelper::currentMessages[LANG_SET]};
@@ -134,7 +134,7 @@ class OOKEditorAppView : public View {
     ProgressBar progressbar{{2 * 8, 250, 208, 16}};
 
     // Waveform display using waveform buffer and yellow theme color.
-    Waveform waveform{{0, 208, 240, 32}, waveform_buffer, 0, 0, true, Theme::getInstance()->fg_yellow->foreground};
+    Waveform waveform{{0, 208, screen_width, 32}, waveform_buffer, 0, 0, true, Theme::getInstance()->fg_yellow->foreground};
 };
 
 /******** bug key input view **********/

firmware/application/external/playlist_editor/ui_playlist_editor.hpp

@@ -56,7 +56,7 @@ class PlaylistEditorView : public View {
         "New"};
 
     Text text_current_ppl_file{
-        {sizeof("PPL file:") * 8, 0 * 16, screen_width - sizeof("PPL file:") * 8, 16},
+        {sizeof("PPL file:") * 8, 0 * 16, screen_width - (int)sizeof("PPL file:") * 8, 16},
         ""};
 
     MenuView menu_view{};

firmware/application/external/protoview/ui_protoview.hpp

@@ -60,29 +60,29 @@ class ProtoView : public View {
         "rx_protoview", app_settings::Mode::RX};
 
     RFAmpField field_rf_amp{
-        {13 * 8, 0 * 16}};
+        {UI_POS_X(13), UI_POS_Y(0)}};
     LNAGainField field_lna{
-        {15 * 8, 0 * 16}};
+        {UI_POS_X(15), UI_POS_Y(0)}};
     VGAGainField field_vga{
-        {18 * 8, 0 * 16}};
+        {UI_POS_X(18), UI_POS_Y(0)}};
     RSSI rssi{
-        {21 * 8, 0, 6 * 8, 4}};
+        {UI_POS_X(21), UI_POS_Y(0), UI_POS_WIDTH(6), 4}};
 
     AudioVolumeField field_volume{
-        {28 * 8, 0 * 16}};
+        {UI_POS_X_RIGHT(2), UI_POS_Y(0)}};
 
     RxFrequencyField field_frequency{
-        {0 * 8, 0 * 16},
+        {UI_POS_X(0), UI_POS_Y(0)},
         nav_};
 
     // need to seperate because label shift need to hide independently
     Labels label_zoom{
-        {{0 * 8, 1 * 16}, "Zoom: ", Theme::getInstance()->fg_light->foreground}};
+        {{UI_POS_X(0), UI_POS_Y(1)}, "Zoom: ", Theme::getInstance()->fg_light->foreground}};
     Labels label_shift{
-        {{0 * 8, 2 * 16}, "Shift: ", Theme::getInstance()->fg_light->foreground}};
+        {{UI_POS_X(0), UI_POS_Y(2)}, "Shift: ", Theme::getInstance()->fg_light->foreground}};
 
     OptionsField options_zoom{
-        {7 * 8, 1 * 16},
+        {UI_POS_X(7), UI_POS_Y(1)},
         4,
         {{"1", 1},
          {"2", 2},
@@ -96,22 +96,22 @@ class ProtoView : public View {
          {"1000", 1000}}};
 
     NumberField number_shift{
-        {7 * 8, 2 * 16},
+        {UI_POS_X(7), UI_POS_Y(2)},
         5,
         {-MAXSIGNALBUFFER, MAXSIGNALBUFFER},
         1,
         ' '};
 
     Button button_reset{
-        {screen_width - 12 * 8, 1 * 16, 96, 24},
+        {UI_POS_X_RIGHT(12), UI_POS_Y(1), UI_POS_WIDTH(12), UI_POS_HEIGHT(1.5)},
         LanguageHelper::currentMessages[LANG_RESET]};
 
     Button button_pause{
-        {screen_width - 12 * 8, 1 * 16 + 24, 96, 24},
+        {UI_POS_X_RIGHT(12), UI_POS_Y(2.5), UI_POS_WIDTH(12), UI_POS_HEIGHT(1.5)},
         LanguageHelper::currentMessages[LANG_PAUSE]};
 
     Waveform waveform{
-        {0, 8 * 8, 240, 50},
+        {UI_POS_X(0), UI_POS_Y(4), UI_POS_MAXWIDTH, (UI_POS_HEIGHT_REMAINING(5) / 4) - 4},
         waveform_buffer,
         0,
         0,
@@ -119,7 +119,7 @@ class ProtoView : public View {
         Theme::getInstance()->fg_yellow->foreground};
 
     Waveform waveform2{
-        {0, 8 * 8 + 55, 240, 50},
+        {UI_POS_X(0), UI_POS_Y(4) + (UI_POS_HEIGHT_REMAINING(5) / 4), UI_POS_MAXWIDTH, (UI_POS_HEIGHT_REMAINING(5) / 4) - 4},
         &waveform_buffer[MAXDRAWCNTPERWF],
         0,
         0,
@@ -127,7 +127,7 @@ class ProtoView : public View {
         Theme::getInstance()->fg_yellow->foreground};
 
     Waveform waveform3{
-        {0, 8 * 8 + 110, 240, 50},
+        {UI_POS_X(0), UI_POS_Y(4) + 2 * (UI_POS_HEIGHT_REMAINING(5) / 4), UI_POS_MAXWIDTH, (UI_POS_HEIGHT_REMAINING(5) / 4) - 4},
         &waveform_buffer[MAXDRAWCNTPERWF * 2],
         0,
         0,
@@ -135,7 +135,7 @@ class ProtoView : public View {
         Theme::getInstance()->fg_yellow->foreground};
 
     Waveform waveform4{
-        {0, 8 * 8 + 165, 240, 50},
+        {UI_POS_X(0), UI_POS_Y(4) + 3 * (UI_POS_HEIGHT_REMAINING(5) / 4), UI_POS_MAXWIDTH, (UI_POS_HEIGHT_REMAINING(5) / 4) - 4},
         &waveform_buffer[MAXDRAWCNTPERWF * 3],
         0,
         0,

firmware/application/external/random_password/ui_random_password.hpp

@@ -203,7 +203,7 @@ class RandomPasswordView : public View {
         ' '};
 
     OptionsField field_method{
-        {(screen_width / 2) + (sizeof("method:") - 1) * 8, 7 * 16 - 2},
+        {(screen_width / 2) + (int)(sizeof("method:") - 1) * 8, 7 * 16 - 2},
         sizeof("R+L+R+H"),
         {{"R+L+R", Method::RADIO_LCG_ROLL},
          {"R+L+R+H", Method::RADIO_LCG_ROLL_HASH}}};

firmware/application/external/remote/ui_remote.hpp

@@ -292,12 +292,12 @@ class RemoteAppView : public View {
     bool is_sending() const { return replay_thread_ != nullptr; }
     void show_error(const std::string& msg) const;
 
-    static constexpr Dim button_rows = 4;
-    static constexpr Dim button_cols = 3;
-    static constexpr uint8_t max_buttons = button_rows * button_cols;
-    static constexpr Dim button_area_height = 200;
-    static constexpr Dim button_width = screen_width / button_cols;
-    static constexpr Dim button_height = button_area_height / button_rows;
+    Dim button_rows = 4;
+    Dim button_cols = 3;
+    uint8_t max_buttons = button_rows * button_cols;
+    Dim button_area_height = 200;
+    Dim button_width = screen_width / button_cols;
+    Dim button_height = button_area_height / button_rows;
 
     // This value is mysterious... why?
     static constexpr uint32_t baseband_bandwidth = 2'500'000;
@@ -328,7 +328,7 @@ class RemoteAppView : public View {
     bool ready_signal_{};  // Used to signal ReplayThread ready.
 
     TextField field_title{
-        {0 * 8, 0 * 16 + 2, 30 * 8, 1 * 16},
+        {0 * 8, 0 * 16 + 2, screen_width, 1 * 16},
         {}};
 
     TransmitterView2 tx_view{