- Fix long-address numeric message decoding: read body[0] from Vy (j+1)
for multi-word messages, from w1 for single-word. Fix MF word count
for long addresses (n_field words, not n_field+1).
- Fix long-address short message: read 5 additional BCD digits from Vy
for 8-digit decode.
- Fix BCD table: index 10 is '.' (dot) not ' ' (space) in both RX and TX.
- Clean up address decode: identify address type by value range per
Table 3.8.1-1. Remove is_group/is_temp_group from packet structs.
- Rename SMSG to SHORT. Format message payload directly in baseband:
TONE, NUM abc, SRC N, SRC N N=M R=R, RESERVED hex.
- Add BIW1 heartbeat packet (biw_field=0xFF) on every decoded frame.
- Move timezone table to file scope, simplify console log_message,
add No signal initial status, simplify serial BIW output format.
External app for encoding and transmitting FLEX pager frames at
1600bps/2FSK. Supports short (1-1,933,312) and long (2,101,249-
4,297,068,542) addresses across all encoding sets (1-2, 1-3/1-4, 2-3).
Message types:
- Alphanumeric (vector type 5): 7-bit chars, signature, K checksum
- Standard Numeric (vector type 3): 4-bit BCD, K checksum
- Short/tone-only (vector type 2): space-filled BCD in vector word
- Short numeric (vector type 2): BCD digits in vector word (3/8 digits)
Frame structure:
- FIW (Frame Information Word): cycle, frame, roaming flag
- BIW (Block Information Word) support with up to 3 extra words:
Date, Time, SysInfo/timezone+DST, SSID1 (Simulcast System ID:
Local ID + Coverage Zone), SSID2 (Country Code)
- BCH(31,21) encoding with bit reversal, block interleaving
- Two frames per TX: message R=1 (new) then R=0 (duplicate)
- Message number N (0-63): random seed from RTC, auto-increments
- ERS (Emergency Re-Sync) burst: configurable N x 42-cycle bursts
with 8-cycle preamble per frame
UI:
- Capcode info line: address type, computed frame/phase (reference)
- TX status: step counter with ERS/frame progress
- Set params view: Date/Time/TZ/DST, LocID/CovZone, CountryCode,
Roaming, message number, ERS count
- Date/time auto-populated from RTC with calendar-equivalent year
mapping for years beyond 2025 (per ARIB STD-43A)
- Year validation with equiv-year popup for out-of-range values
- Capcode and BIW flags persisted via SettingsManager
Serial interface:
- sendflex <capcode> <type> <msglen> + payload
- Types: 0=alpha, 1=numeric, 2=short/tone, 3=short numeric
- FlexTosendMessage (ID 103) for serial-to-app communication
- App must be open to receive serial commands
RX: fix address/batch-boundary handling, add numeric continuation,
add heuristic type detection toggle, pass inverted polarity flag,
stream decoded messages over USB serial.
TX: rename phase to polarity (Standard/Inverted), fix function
validation (&&→||), fix serial shell payload read (offset tracking,
31-byte cap, preserve msglen).
Decoder: remove color escapes from output (plain text for all
consumers), guard count_alpha_fill against empty string, keep
numeric_len across continuation batches.
Serial format: POCSAG <baud> <addr> <func> <pol> <type> "<msg>" hex:<hex>
Quote escaping for embedded " and \\ in alpha messages.
* make detector list a freqman file
* add file loading ability, autoscan/pause, step in on pause on range, frequency value display
* Update firmware/application/external/detector_rx/ui_detector_rx.hpp
* Update firmware/application/external/detector_rx/ui_detector_rx.cpp
* add 750 kHz step
* revamp UI and add auto advance, auto scan, and only display 'RANGE SCAN...' when auto scan is on on ranges to avoid flicker of the hell.
* adjust as I can the ranges as they where before
* Update sdcard/FREQMAN/DETECTOR.TXT
* fix instance related copilot remark
* Add P25 TX external app (UI shell)
- Register p25_tx in external.cmake and external.ld at 0xAE010000
- UI with NAC, SYSID, WACN, RFSSID, SITEID, TG, VCH fields
- 2.4 Msps TX, 155 MHz default, no baseband (m4_app_tag={0,0,0,0})
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add P25 TX baseband processor (M4)
- P25TxConfigure = 102 in message.hpp + P25TxConfigureMessage
- image_tag_p25_tx in spi_image.hpp
- set_p25tx_data() in baseband_api (copies dibits to bb_data, sends msg)
- proc_p25_tx registered in baseband CMakeLists (tag P25T)
- m4_app_tag updated to {'P','2','5','T'}
- TX wired: transmits P25 FSW test pattern (512 dibits) via M4 C4FM proc
- on_tx_progress handler stops TX when frame complete
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: implement correct P25 TSBK encoding from ccemu
- BCH(63,16) via generator matrix (not polynomial division)
- CRC-CCITT bit-by-bit init=0 over 80 bits
- 1/2-rate trellis encoder (4 states)
- DataInterleave per TIA-102
- Status symbol insertion (SS=0x02 every 35 dibits)
- TSBK rotation: IDEN_UP -> NET_STS -> RFSS_STS -> NET_STS
- tsbk_idx_ persists across buffer refills, resets on stop_tx
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: apply clang-format
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: fix HackRF lockup - zero output buffer when idle
When configured=false, execute() returned without writing to the
output buffer. The DMA would re-use stale IQ samples from the
previous cycle, sending garbage to the HackRF and causing it to
lock up mid-transmission.
Fix: explicitly zero the output buffer when the proc is idle.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: address PR review feedback and fix TX restart lockup
- Replace NumberField with SymField::Type::Hex for NAC, SYSID, WACN,
RFSSID, SITEID, TG, VCH (hex values should display as hex)
- Add voice grant TSBK (OpcodeGrpVChGrant 0x00) to rotation cycle;
rotation is now 5-step: IDEN_UP->NET_STS->RFSS_STS->GRP_V_GRANT->NET_STS
- Wire TG and VCH fields into fill_tx_buffer for voice grant encoding
- Reset txprogress_message.done=false on new P25TxConfigure in baseband
- Add #include <cstring> to baseband_api.cpp (needed for memcpy)
- Fix TX restart lockup: remove baseband::shutdown() from stop_tx() so
the M4 stays loaded between sessions; only shut down in destructor.
Previously, the stale ShutdownMessage in the queue would be picked up
by the restarted M4 on second TX, causing it to exit immediately and
leaving the HackRF stuck in TX mode.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* ifndef guard instead of pragma
Implements MDC-1200 single and double-packet TX as a PPMA external app.
Features:
- Supports PTT ID, Emergency, Radio Check, Stun/Unstun, Call Alert,
Selective Call (1 & 2), Status Request/Response, Remote Monitor, Message
- Auto-fills Arg byte on Op selection
- AFSK FSK modulation: 1800 Hz mark / 1200 Hz space, 1200 baud
- NRZI encoding with Golay FEC per MDC-1200 spec
- Tap-to-edit frequency via keypad
- Default TX gain of 30 dB
- Uses AFSK baseband (same as POCSAG/SAME TX)
- All buffers kept off the stack to avoid hard faults in ext app environment
* mdc_tx: address PR review feedback
- Move MDC helpers into ui::external_app::mdc_tx namespace (drop anonymous namespace)
- Use AFSK_TX_SAMPLERATE macro instead of hardcoded 1536000
- Add #include "modems.hpp" explicitly for AFSK_TX_SAMPLERATE
- Replace n*8/n*16 pixel positions with UI_POS_X/UI_POS_Y macros
- Fix field comments: 'hex bytes' -> 'decimal bytes (0-255)'
- Fix TransmitterView frequency_step: 1750000 -> 12500 (12.5kHz NFM step)
- Fix MDC preamble: replace leading 0x00 bytes with 0xAA
after NRZI encoding stayed 0x00, terminating TX on the first word.
0xAA bytes NRZI-encode to 0xFF (continuous 1800Hz mark tone), which
is the standard MDC-1200 preamble and does not trigger the sentinel.
* Add KISS TNC external app for APRS RX/TX over USB serial
Adds a KISS TNC (Terminal Node Controller) app that bridges APRS
packets between the HackRF radio and a connected PC over USB CDC
serial using the KISS protocol.
Features:
- APRS receive at 144.390 MHz (configurable), decoding packets via
the existing APRS RX baseband (PAPR.bin)
- Received AX.25 frames forwarded to host as KISS-framed data over
USB serial
- KISS frames received from host transmitted as AFSK audio using the
existing AFSK TX baseband (PAFT.bin)
- Clean RX->TX->RX baseband switching with proper timing delays
- USB connection status indicator with periodic refresh
- Compatible with standard KISS TNC clients (Xastir, APRSISCE/32,
Dire Wolf, etc.)
Firmware changes required to support the external app:
- baseband_api.cpp: mark set_aprs() __attribute__((used)) so it is
retained by the linker for external app use
- protocols/ax25: add make_frame_from_raw() to build NRZI bitstream
from raw AX.25 bytes, marked __attribute__((used))
- usb_serial_host_to_device: add kiss_raw_handler hook to route
incoming USB bytes directly to a registered callback, bypassing
the shell; marked __attribute__((used))
- baseband/proc_aprsrx: add constructor that auto-configures at
1200 baud so external apps do not need to call set_aprs() at init
* Address PR review: generic RAII USB handler, fix TX cutoff and buffer overflow
- Replace KISS-specific set_kiss_raw_handler() in shared USB code with a
generic UsbSerialInputHandler RAII class; any app can now register a
handler via the ctor and it auto-clears in the dtor — no app-specific
'if' checks in shared code, no __attribute__((used)) needed
- Remove __attribute__((used)) from set_aprs() — it is referenced directly
by ui_aprs_rx.cpp so it will never be dead-stripped
- Fix send_kiss_frame() buffer overflow: per-byte bounds check prevents
2-byte escape sequences from writing past the end of the output buffer
- Replace fillOBuffer(TIME_INFINITE) with chOQWriteTimeout(TIME_IMMEDIATE)
to drop bytes instead of blocking the event loop
- Remove chThdSleepMilliseconds() calls from start_tx() and finish_tx()
- Fix TX cutoff bug: call start_tx() directly from process_kiss_frame()
instead of deferring via tx_pending_ flag (deferral caused kiss_idx_
to be 0 by the time start_tx() fired, producing an empty frame)
* Move USB write into UsbSerialInputHandler class
Add a write() method to UsbSerialInputHandler so all USB I/O
(both input callback and output) is encapsulated in the class.
KISS TNC now uses usb_input_handler_->write() instead of calling
chOQWriteTimeout(&SUSBD1.oqueue, ...) directly, keeping raw USB
details out of app code.
* Address PR review: remove auto-configure from APRSRxProcessor, add timeout param to write()
- Remove default_config from APRSRxProcessor() constructor; baseband should
start unconfigured and wait for APRSRxConfigureMessage from the app side
(already sent via baseband::set_aprs() in KISS TNC and APRS RX app)
- Remove stray #include "stdio.h" from proc_aprsrx.cpp
- Add systime_t timeout parameter with default TIME_IMMEDIATE to
UsbSerialInputHandler::write() so callers can choose blocking behaviour
* Add SAME TX external app
Adds a Specific Area Message Encoding (SAME/EAS) transmitter as an
external app (.ppma) for HackRF PortaPack.
SAME is the digital protocol used by NOAA Weather Radio and the
Emergency Alert System in the US and Canada for broadcasting
emergency alerts (tornado warnings, flash floods, EAN, etc.)
on 162.400-162.550 MHz and AM/FM broadcast stations.
Features:
- Originator code selector (WXR, EAS, CIV, PEP)
- Event code selector: 26 standard SAME event codes
(RWT, TOR, SVR, FFW, EAN, etc.) with live name display
- FIPS location code entry (state 00-99 + county 000-999)
- Purge time entry (hours + minutes)
- Live message preview showing the encoded header
- AFSK encoding: mark=2083Hz, space=1563Hz, 520.833 baud
- FM deviation: 5 kHz, repeated 3x per SAME spec
- Default frequency: 162.550 MHz (WX channel 7)
Protocol details:
- 16-byte 0xAB preamble (bit-reversed for LSB-first AFSK)
- Header: ZCZC-ORG-EVT-SSPCCC+HHMM-JJJHHMM-STATION-
- Uses existing PAFT (proc_afsk) baseband image
* Apply clang-format via format-code.sh
* Add GPL license headers, guard re-entry, call set_transmitting(true)
- Add standard PortaPack GPL-2.0 license header to ui_same_tx.cpp and .hpp
- Guard start_tx() with tx_active_ to prevent re-entrant calls
- Call tx_view.set_transmitting(true) after starting TX so the
TransmitterView button switches to stop mode
* POC
* submodule
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* sadly have to reduce history
* icon
* bring it back
* bring it back
* bb
* format and move bb outside
* Add TPMS transmit application with editable fields and update linker script
* Fix formatting in application information structure for TPMS TX
* Implement TPMS recent entry detail view and enhance TPMS TX encoding logic
* Refactor TPMS TX UI layout and streamline packet display updates
* Fix formatting by removing unnecessary blank line in TPMSTXView constructor
* Enhance TPMS transmission logic with signal type handling and update UI components
* Add advanced mode toggle and auto-select signal type based on packet type
* Enhance packet display and encoding logic with protocol-specific notes for temperature and ID handling
* Implement baseband switching logic for TPMS transmission based on signal type
* Implement application-level FSK repeat handling and initialize repeat counter
* Add FSK termination function and improve transmission handling
* Remove unused kill_fsk function and clean up whitespace in TPMS transmission logic
* Add pressure and temperature unit conversion functionality in TPMSTXView
* Add temperature and function field visibility handling in TPMSTXView
* Add signal type handling and improve data loading in TPMSTXView
* Fix formatting of pressure unit string in TPMSRecentEntryDetailView
* Add pressure overflow checks and enhance transponder ID handling in TPMSTXView
* Update application information and change icon color to green in TPMS TX
* Update desired menu position for TPMS TX application
- Add bar() conversion method to Pressure class
- Convert pressure units system from boolean to enum (kPa, PSI, BAR)
- Add BAR option to pressure unit selector in UI
- Update settings manager to persist pressure unit preference
- Use ternary operators for compact pressure formatting
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* fix ui overlap, align with log box
* bring back enum inside the class as a simple enum
* correctly restore saved setting whatever the modulation was at exit
* set squelch / field_squelch / receiver model in one go, add audio/receiver model stop and start
* filters OK, radio configurations set
* all modes are working, noise still needs work, especially in FM. A baseband enum is also needed
* audio and decoding fixed, clipping and the baseband enum are still missing
* USB receive good
* LSB receive good
* all mode receive good, log is dead
* frequency measurement good, decode dead
* total killed
* szutyok, gerjed
* frequenty meas only.
* ui ok
* Add frequency measurement handling and update Morse processing logic
* fix ssb speed
Totoo
Pezsma
VasylSamoilov
Ryan Harden
Frederic BORRY
gullradriel
zxkmm
Sarah Rose
berkeozkir
E.T.
Sandbox
jLynx
lifegame1lu111
Hoite Prins
stafur
Harin Lee