* First step to EPIRB rx app fix
* Added spike filtering on carrier detection for more robustness.
* Created dedicated packet builder
* First step to fixing UI.
* First step to epirb-rx ui rework.
* Made static methods static members
* Code optim
* Code cleanup + first step to new UI
* Fixed display
* Added BeaconList widget + BeaconDB
* Epirb TX app memory optim
* Fixed OOM when opening Map Display or Locator editor on EPIRB TX app
* First step to tabs + code cleanup to free some space...
* Added spectrum analyzer + fixed display
* Fixed display refresh issue after leaving spectrum.
* More code optim + first step to detail view.
* Fixed float coord display.
* Fixed protocol names
* Fixed location display
* Externalized country base to sd card + more code optim
* Fixed country display
* Fixed path
* Added protocol description and resource manager
* Added main/aux loc device
* Removed specan to save space
* First step to adding QR code
* Used a custom TextArea component instead of Console
* Fixed QR code display for map URL
* Added beacon selection management + fixes
* First step to map/data qr.
* QR tab : added data + detail/map toggle
* Removed sqhelch to save space
* Removed audio to save space
* Removed freq label to save space
* Removed packet timestamp to save space
* Moved frequency values to resource file
* Fixed detection parameters to suite real beacons (slower phase shift time).
* Fixed countdown field size
* Fixed frequency list.
* Fixed detail view on select.
* First step to fix settings.
* Fixed squelch for a 0-99 range.
* Added bch code correction (single bit error).
* More code optim, disable country cache, removed inline from location to reduce code size.
* Removed inline, code formatting.
* Added bch code correction display.
* Fixed focus bug, fixed packet size check. Added BCH1/BCH2 correction test cases in BEACONS.TXT file for EPIRB TX application.
* Fixed merge
* Added countdown setting.
* Added selection display to beacon list
* Restored squelch control. Added countdown reset.
* Code optim on formatSummary
* More code optim
* Made ResourceManager methods static
* Externalized beacon strings to res file
*Removed frame parameter from methods
* Added test beacons for emergency. Removed old res file.
* Fixed resource manager
* Fixed resources. Added emergency display.
* BCH + res fixes
* Fixed beacons
* Fixed app color. Fixed HexId and Serial calculation.
* Fixed frequency list. Comments.
* Code cleanup and comments
* Added slideshow mode to EPIRB TX application. Code comments / cleanup.
* Fixed frame end after wrong code cleanup
* More code optim and comments. Removed touch from beacon list.
* Added beacon selection with encoder on detail view.
* Added beacon paging in header. Fixed timeout display
* Fixed build for PRALINE
* Fixed formatting
* Potential fix for pull request finding
* stop on carriage return
* empty string if unknown
* zeroing data buffer before use
* fix typo
* add include
* fix case if pair == 0
* fix scpectrum_on to spectrum_on
* fix typos
* replaced 3 inlined offset blocks with apply_offset calls
* set_beacon consolidation
* Add P25 TX external app (UI shell)
- Register p25_tx in external.cmake and external.ld at 0xAE010000
- UI with NAC, SYSID, WACN, RFSSID, SITEID, TG, VCH fields
- 2.4 Msps TX, 155 MHz default, no baseband (m4_app_tag={0,0,0,0})
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add P25 TX baseband processor (M4)
- P25TxConfigure = 102 in message.hpp + P25TxConfigureMessage
- image_tag_p25_tx in spi_image.hpp
- set_p25tx_data() in baseband_api (copies dibits to bb_data, sends msg)
- proc_p25_tx registered in baseband CMakeLists (tag P25T)
- m4_app_tag updated to {'P','2','5','T'}
- TX wired: transmits P25 FSW test pattern (512 dibits) via M4 C4FM proc
- on_tx_progress handler stops TX when frame complete
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: implement correct P25 TSBK encoding from ccemu
- BCH(63,16) via generator matrix (not polynomial division)
- CRC-CCITT bit-by-bit init=0 over 80 bits
- 1/2-rate trellis encoder (4 states)
- DataInterleave per TIA-102
- Status symbol insertion (SS=0x02 every 35 dibits)
- TSBK rotation: IDEN_UP -> NET_STS -> RFSS_STS -> NET_STS
- tsbk_idx_ persists across buffer refills, resets on stop_tx
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: apply clang-format
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: fix HackRF lockup - zero output buffer when idle
When configured=false, execute() returned without writing to the
output buffer. The DMA would re-use stale IQ samples from the
previous cycle, sending garbage to the HackRF and causing it to
lock up mid-transmission.
Fix: explicitly zero the output buffer when the proc is idle.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: address PR review feedback and fix TX restart lockup
- Replace NumberField with SymField::Type::Hex for NAC, SYSID, WACN,
RFSSID, SITEID, TG, VCH (hex values should display as hex)
- Add voice grant TSBK (OpcodeGrpVChGrant 0x00) to rotation cycle;
rotation is now 5-step: IDEN_UP->NET_STS->RFSS_STS->GRP_V_GRANT->NET_STS
- Wire TG and VCH fields into fill_tx_buffer for voice grant encoding
- Reset txprogress_message.done=false on new P25TxConfigure in baseband
- Add #include <cstring> to baseband_api.cpp (needed for memcpy)
- Fix TX restart lockup: remove baseband::shutdown() from stop_tx() so
the M4 stays loaded between sessions; only shut down in destructor.
Previously, the stale ShutdownMessage in the queue would be picked up
by the restarted M4 on second TX, causing it to exit immediately and
leaving the HackRF stuck in TX mode.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* ifndef guard instead of pragma
* POC
* submodule
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* sadly have to reduce history
* icon
* bring it back
* bring it back
* bb
* format and move bb outside
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* USB receive good
* LSB receive good
* all mode receive good, log is dead
* frequency measurement good, decode dead
* total killed
* szutyok, gerjed
* frequenty meas only.
* ui ok
* Add frequency measurement handling and update Morse processing logic
* fix ssb speed
* Add FLEX pager support
- Introduced a new FLEX configuration function in baseband_api.
- Added FLEX application view and associated UI elements.
- Implemented FLEX processing logic in proc_flex, including demodulation and message handling.
- Updated CMakeLists to include new FLEX source files and headers.
- Enhanced message system to support FLEX-specific messages and statistics.
This commit lays the groundwork for FLEX pager functionality, allowing for the reception and processing of FLEX messages.
* Fixed baseband and moved app to external with some other fixes.
* Format code
---------
Co-authored-by: RocketGod <57732082+RocketGod-git@users.noreply.github.com>
* adding zoom_factor to app settings
* separated zoom_factor settings for AM and AMFM
* fix order so zoom factor is also applied correctly on modulation change
* fix zoom not applied when changing bandwidth
* temporary disable the Scanner so we are not breaking the nightly. Until we are choosing to finally remove it or find a better solution
---------
Co-authored-by: gullradriel <3157857+gullradriel@users.noreply.github.com>
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* wf3
* Ookbrute (#2354)
* Revert "Ookbrute (#2354)"
This reverts commit abb8143eec.
* fix
* test edition
* re enable ble
* re enable ert
* steal amfm stuff
* something happens
* save bmp on start btn
* kinda works
* exit crash fixed
* redline, remove some hardcoded
* removed cpu killer red line, and some fixes
* simplify #1
* seems ok. time to improve
* added hidden freq offset to receiver model, so wefax can be set to the "correct" freq without users needs to substract 300 hz
* badly implemented sync detection, and disabled it.
* fix for fix
* fixes
* fix offset to real life off
* no line on freq enter
* fixes
* changed order of modulations, changed case to avoid capture
* added missing AMAudioFMApt mode to dump pmem
* reorder demod, adding missing ones, fix warnings
* removed uneeded 'previous_modulation', renamed WFAX to AMFM to match other places
* removing uneeded 'previous_modulation' uneeded check in change_modulation
* move capture at the end so AMAUdioFMApt is matching the other arrays for position 4
* added AMFM to Recon Level and Scanner
* clang + more details in some comments
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* Initial commit - wip
* Half part of the transition of baseband processor.
* More SGD
* WIP, Weather refactor, UI improv
* Rename
* Added 4msps, and fixes
* Fixes
* princeton working
* Renamed proc_weather, bc now multifunctional
* Proto: bett
* FPS_CAME = 4,
FPS_PRASTEL = 5,
FPS_AIRFORCE = 6,
* Came Atomo, fixes
* Separate weather and sgd, bc of baseband size limit
* Fix display
* Save space
* More protos
* Dooya proto added
* More protos
* add protos
* More protos
* Move weather to ext app
* nw
* Revert "Move weather to ext app"
This reverts commit 8a84aac2f5.
* revert
* Fix merge
* Better naming
* More protos
* More protos
* Add protos
* Fix warning
* Add NeroRadio
* more protos
* more protos
* More protos
* Shrink a bit
* fixes
* More protos
* Nicer code
* Fix naming
* Fix format
* Remove unused
* Fix some protos, that needs a LOOOONG part with the same lo/high
* Modify key calculation
* Cleanup of BLE Rx naming and added switching between the two.
Fixed bug in packet count not resetting when opening new file in BLE Tx
* Bug fix and color change.
* First BLE work
* Adding new fsk proc WIP
* Reverting ble stuff
* Initial compile working
* more work.
* Adding waterfall for debug
* more edits to debug
* Work to get widgets to show.
* cleanup before attempting diff fsk modulation method
* Temporary debug to learn how decimation scales.
* Tab view for console and spectrum. Spectrum still not working right.
* Fixed spectrum offset.
* Added audio sampling rate increments to freqman
* Added overriding range for frequency field and working off deviation
* BLE cleanup. Got PDU parsing.
* Parsing CRC
* forgot :
* Removing AA again because cluttering UI
* fix compile
* attempt at throttling.
* WIP changes.
* Decimating by 4 to handle issue with overloading.
* Attempt to parse MAC still needs work.
* Small fixes. MAC still wrong.
* Fixed invalid indexing on Symbols.
* List view of BLE Mac Addresses
* Added Channel Option and improved GUI header.
* renaming to dB and fixing some warnings.
* Advertisements only.
* Initial cut of BLE Advertisement scan app.
* Copyrights
* formatting correctly in association to clang13
* Fixing warning and hiding fsk rx.
* spacing
* Removing some cmake install files that weren't suppose to be there.
* missed some.
* Added name to about.
* Edits for PR review pt.1
* Refactor ORing with 0 doesn't make sense.
* remove parenthesis
* More PR Review changes.
* Fix compiler error.
* PR Review edits.
* PR review changes.
* Fixes.
* Unneeded ;
* Update ui_about_simple.cpp
---------
Co-authored-by: jLynx <admin@jlynx.net>
* Attempt to fix Capture startup hang
* Pump baseband_queue on M4 startup
* Synchronization experiment
* Moved SpectrumCapture member, better hang detection for M0
* Prevent execute from working on members until class has been initialized.
* Formatting
* Remove workaround.
* Rebase on next
Frederic BORRY
Pezsma
Ryan Harden
Sarah Rose
zxkmm
qwer123
Totoo
stafur
StarVore Labs
Tim Elfelt
Netro
Brumi-2021
gullradriel
Mark Thompson
Kyle Reed
Bernd Herzog
jLynx
phil-stumpy
lujji
Brumi-2021
heurist1
eried