- Fix long-address numeric message decoding: read body[0] from Vy (j+1)
for multi-word messages, from w1 for single-word. Fix MF word count
for long addresses (n_field words, not n_field+1).
- Fix long-address short message: read 5 additional BCD digits from Vy
for 8-digit decode.
- Fix BCD table: index 10 is '.' (dot) not ' ' (space) in both RX and TX.
- Clean up address decode: identify address type by value range per
Table 3.8.1-1. Remove is_group/is_temp_group from packet structs.
- Rename SMSG to SHORT. Format message payload directly in baseband:
TONE, NUM abc, SRC N, SRC N N=M R=R, RESERVED hex.
- Add BIW1 heartbeat packet (biw_field=0xFF) on every decoded frame.
- Move timezone table to file scope, simplify console log_message,
add No signal initial status, simplify serial BIW output format.
RX: fix address/batch-boundary handling, add numeric continuation,
add heuristic type detection toggle, pass inverted polarity flag,
stream decoded messages over USB serial.
TX: rename phase to polarity (Standard/Inverted), fix function
validation (&&→||), fix serial shell payload read (offset tracking,
31-byte cap, preserve msglen).
Decoder: remove color escapes from output (plain text for all
consumers), guard count_alpha_fill against empty string, keep
numeric_len across continuation batches.
Serial format: POCSAG <baud> <addr> <func> <pol> <type> "<msg>" hex:<hex>
Quote escaping for embedded " and \\ in alpha messages.
* update hackrf submodule
* add platform_gpio.c and platform_scu.c to baseband build
-New source files required by the updated hackrf submodule.
* adapt scsi.c to updated hackrf API
-Rename struct gpio_t to struct gpio and add gpio_lpc.h include.
* adapt hackrf_core.c to updated hackrf API
- Rename struct gpio_t to struct gpio throughout
- Add platform_gpio.h, platform_scu.h, and fixed_point.h includes
- Update pin_setup() to use platform_scu() accessor instead of SCU_ macros
- Rewrite sample_rate_set() to use new fixed-point frequency API
- Update ssp_config_w25q80bv for changed struct layout
- Update si5351c and max283x function call signatures
* Add P25 TX external app (UI shell)
- Register p25_tx in external.cmake and external.ld at 0xAE010000
- UI with NAC, SYSID, WACN, RFSSID, SITEID, TG, VCH fields
- 2.4 Msps TX, 155 MHz default, no baseband (m4_app_tag={0,0,0,0})
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add P25 TX baseband processor (M4)
- P25TxConfigure = 102 in message.hpp + P25TxConfigureMessage
- image_tag_p25_tx in spi_image.hpp
- set_p25tx_data() in baseband_api (copies dibits to bb_data, sends msg)
- proc_p25_tx registered in baseband CMakeLists (tag P25T)
- m4_app_tag updated to {'P','2','5','T'}
- TX wired: transmits P25 FSW test pattern (512 dibits) via M4 C4FM proc
- on_tx_progress handler stops TX when frame complete
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: implement correct P25 TSBK encoding from ccemu
- BCH(63,16) via generator matrix (not polynomial division)
- CRC-CCITT bit-by-bit init=0 over 80 bits
- 1/2-rate trellis encoder (4 states)
- DataInterleave per TIA-102
- Status symbol insertion (SS=0x02 every 35 dibits)
- TSBK rotation: IDEN_UP -> NET_STS -> RFSS_STS -> NET_STS
- tsbk_idx_ persists across buffer refills, resets on stop_tx
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: apply clang-format
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: fix HackRF lockup - zero output buffer when idle
When configured=false, execute() returned without writing to the
output buffer. The DMA would re-use stale IQ samples from the
previous cycle, sending garbage to the HackRF and causing it to
lock up mid-transmission.
Fix: explicitly zero the output buffer when the proc is idle.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* p25_tx: address PR review feedback and fix TX restart lockup
- Replace NumberField with SymField::Type::Hex for NAC, SYSID, WACN,
RFSSID, SITEID, TG, VCH (hex values should display as hex)
- Add voice grant TSBK (OpcodeGrpVChGrant 0x00) to rotation cycle;
rotation is now 5-step: IDEN_UP->NET_STS->RFSS_STS->GRP_V_GRANT->NET_STS
- Wire TG and VCH fields into fill_tx_buffer for voice grant encoding
- Reset txprogress_message.done=false on new P25TxConfigure in baseband
- Add #include <cstring> to baseband_api.cpp (needed for memcpy)
- Fix TX restart lockup: remove baseband::shutdown() from stop_tx() so
the M4 stays loaded between sessions; only shut down in destructor.
Previously, the stale ShutdownMessage in the queue would be picked up
by the restarted M4 on second TX, causing it to exit immediately and
leaving the HackRF stuck in TX mode.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* ifndef guard instead of pragma
* Cleaned up #ifndef PRALINE and updated logic to being with #ifdef PRALINE entries where possible to make logic flow for PRALINE code execution pipeline clearer. Cleaned up compiletime warnings for PRALINE related codebase updates.
* Addressed comments provided by copilot during PR review. Combed through frequency definitions for consistency between PLL A and PLL B register definitions for CLKs 0-7. Ensured CLK3/LK6 <- SMA PORTs and CLK7 <- not utiliized are disabled during core development phase to support root cause analysis of any spectral artifacts. Updated MCU frequency to 40MHz to ensure audio harmonics are outside FM radio band range (< 80 MHz, >120MHz) and added comments clarifying choice of 40 over 10 MHz for potential future root cause analysis in other bands where audio may be expected as needed. Added CLK6 and CLK7 to Clocks Status View Debug display. Moved CLK defintions and PLL instantiations for components that are most RF sensitive to PLL A. Left others in PLL B. That is move FPGA CLK1 to PLL B, while moving CLK2, CLK4, and CLK5 to PLL A.
* Cleaned up PLL A and B XTAL reference checks relative to 800 MHz.
* Encapsulated HackRF Pro Praline debug and status vies into a single Pro Debug submenu as part of clean up.
* Fixed BLE RX Out of Memory error. Updated LPC43xx ld scripts to accouint for additional HackRF Pro praline memory.
* Addressed copilot comments for ble_rx_app by adding recent_entries_view.set_dirty. Updated ble_rx_app for easier use with heap limit set to one less than recent entries max limit.
* Addressed copilot comments by updating comment clarity in source files. Updated ui_debug to allow for return reference if set for PRO debug menu item.
* Improved readability of intialization parameters for the FPGA registers, and addressed 20Mhz nulls by initializing DC Notch width with standard setting, and DC Adaptiation rate with a balanced setting.
* Ran format-code.sh
* Added option to allow for user to set number if entries in recent list. Default is set to a relatively stable 32.
* Removed #ifdef PRALINE pragmas from ble_rx_app such that HackRF One can also use the updated UI widget to allow for user to set number of entries in recent list.
* Ran format-code.sh
* Improved RSSI for praline. Values are now being counted correctly by statistics methods after selecting ADC = 0 0 for RSSI. This was different than for the hackrf one which uses ADC = 1.
* Implemented SW RSSI calculation since HW RSSI not currently available in hackrf pro (praline) via fpga pass through. Calibrated RSSI power sensistivity to mid level signal intensitities.
* In preparation for WIP allocated full 128k to M4 limiting heap for M0 to 0k, and leabing it only with 64k from bank 0. That is, bank1 and bank2 are fully allocated to M4. Cleaned up #ifdef PRALINE conditionals such taht max2837/39 are in #else conditionals, as well as continuing to clean up hackrf_r9 booleans by placing them within #else conditionals.
* fix typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Addressed co-pilot comments. Clarified use of 25 recent samples in ble app for stability, udpated comments to reflect use of avg power over pwak pwer detection, improved safety of sample packing while relying on intrinstics for execute the implementation in a single machine instruction (PKHBT) for computational and memory efficiency.
* Add KISS TNC external app for APRS RX/TX over USB serial
Adds a KISS TNC (Terminal Node Controller) app that bridges APRS
packets between the HackRF radio and a connected PC over USB CDC
serial using the KISS protocol.
Features:
- APRS receive at 144.390 MHz (configurable), decoding packets via
the existing APRS RX baseband (PAPR.bin)
- Received AX.25 frames forwarded to host as KISS-framed data over
USB serial
- KISS frames received from host transmitted as AFSK audio using the
existing AFSK TX baseband (PAFT.bin)
- Clean RX->TX->RX baseband switching with proper timing delays
- USB connection status indicator with periodic refresh
- Compatible with standard KISS TNC clients (Xastir, APRSISCE/32,
Dire Wolf, etc.)
Firmware changes required to support the external app:
- baseband_api.cpp: mark set_aprs() __attribute__((used)) so it is
retained by the linker for external app use
- protocols/ax25: add make_frame_from_raw() to build NRZI bitstream
from raw AX.25 bytes, marked __attribute__((used))
- usb_serial_host_to_device: add kiss_raw_handler hook to route
incoming USB bytes directly to a registered callback, bypassing
the shell; marked __attribute__((used))
- baseband/proc_aprsrx: add constructor that auto-configures at
1200 baud so external apps do not need to call set_aprs() at init
* Address PR review: generic RAII USB handler, fix TX cutoff and buffer overflow
- Replace KISS-specific set_kiss_raw_handler() in shared USB code with a
generic UsbSerialInputHandler RAII class; any app can now register a
handler via the ctor and it auto-clears in the dtor — no app-specific
'if' checks in shared code, no __attribute__((used)) needed
- Remove __attribute__((used)) from set_aprs() — it is referenced directly
by ui_aprs_rx.cpp so it will never be dead-stripped
- Fix send_kiss_frame() buffer overflow: per-byte bounds check prevents
2-byte escape sequences from writing past the end of the output buffer
- Replace fillOBuffer(TIME_INFINITE) with chOQWriteTimeout(TIME_IMMEDIATE)
to drop bytes instead of blocking the event loop
- Remove chThdSleepMilliseconds() calls from start_tx() and finish_tx()
- Fix TX cutoff bug: call start_tx() directly from process_kiss_frame()
instead of deferring via tx_pending_ flag (deferral caused kiss_idx_
to be 0 by the time start_tx() fired, producing an empty frame)
* Move USB write into UsbSerialInputHandler class
Add a write() method to UsbSerialInputHandler so all USB I/O
(both input callback and output) is encapsulated in the class.
KISS TNC now uses usb_input_handler_->write() instead of calling
chOQWriteTimeout(&SUSBD1.oqueue, ...) directly, keeping raw USB
details out of app code.
* Address PR review: remove auto-configure from APRSRxProcessor, add timeout param to write()
- Remove default_config from APRSRxProcessor() constructor; baseband should
start unconfigured and wait for APRSRxConfigureMessage from the app side
(already sent via baseband::set_aprs() in KISS TNC and APRS RX app)
- Remove stray #include "stdio.h" from proc_aprsrx.cpp
- Add systime_t timeout parameter with default TIME_IMMEDIATE to
UsbSerialInputHandler::write() so callers can choose blocking behaviour
* Cleaned up #ifndef PRALINE and updated logic to being with #ifdef PRALINE entries where possible to make logic flow for PRALINE code execution pipeline clearer. Cleaned up compiletime warnings for PRALINE related codebase updates.
* Addressed comments provided by copilot during PR review. Combed through frequency definitions for consistency between PLL A and PLL B register definitions for CLKs 0-7. Ensured CLK3/LK6 <- SMA PORTs and CLK7 <- not utiliized are disabled during core development phase to support root cause analysis of any spectral artifacts. Updated MCU frequency to 40MHz to ensure audio harmonics are outside FM radio band range (< 80 MHz, >120MHz) and added comments clarifying choice of 40 over 10 MHz for potential future root cause analysis in other bands where audio may be expected as needed. Added CLK6 and CLK7 to Clocks Status View Debug display. Moved CLK defintions and PLL instantiations for components that are most RF sensitive to PLL A. Left others in PLL B. That is move FPGA CLK1 to PLL B, while moving CLK2, CLK4, and CLK5 to PLL A.
* Cleaned up PLL A and B XTAL reference checks relative to 800 MHz.
* Updated PRALINE audio processing methods to account for potential slip in 25MHz reference clock. Moved all clocks to PLLB except for CLK0 to isolate the ADC from potential EMI and clock spills from the other clocks to CLK0. Added PLL reference to Clock ui_debug display and added debug view for PLLA and PLLB. Updated PRO menu in analog_audio_app to allow for 100Hz resolution in sample rate for finer control of samplerate debugging of crackling noise artifacts. Updated ppb method and set it for account for a potential 49 Hz shift in the PRALINE crystal. Started instatiating methods for synchronized DMA transfers for the spectrogram since the FFT calculations and the LCD data updates appear to be related to the crackling noise.
* Added firmware/flash.h to .gitignore.
* Changed reference clock for start_audio_pll to 40MHz instead of ~12MHz xtal. Moved clocks around to reflect best audio quality in analog_audio_app at 3.072 MHz sample frequency.
* Ran format-code.sh.
* Removed ppb in set_sampling_frequency since it created aliasing in analog_audio_app.
* Expanded baseband_bandwidth back to 1750000 after testing since audio quality was retained.
* Updated comments to address copilot recommendations where acceptable.
* Removed firmware/flashsize.h from .gitignore as coordinated with @gullradriel.
* POC
* submodule
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* seperate bb
* sadly have to reduce history
* icon
* bring it back
* bring it back
* bb
* format and move bb outside
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Fixed 0x03 mode for DC/Q-INV/Q-SHFT being set at every tuning and sample rate change. This was the root cause for loss of bluetooth before. Sample rate, and frequency can now be changed without need for manually resetting DC/Q-INV/Q-SHIFT settings. Updated method for setting frequncies in praline so that we have more testing options.
* Ran format-code.sh and cleaned up stale comments.
* Addressed comments, and removed commented line, opting for higher register values, 5E and 5D. Added WFM Debug View to support testing demodulation ringing.
* Addressed comments in PR conversation to clean comments and ensure consistency at initializtion accross updated methods and displays.
* Ran format-code.sh
* Set initial legacy state. Improved readability of clocking initialization settings. Updated set_sampling_frequency, and udpate_bandwidth to set decimation values in the fpga_registers to avoid aliasing in low band frequencies.
* Updated clock_manager to use correct clock and clock parameters for audio pll. Ran format-code.sh.
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Add restaurant pager protocol to SubGhzD receiver
EV1527-variant 25-bit OOK PWM decoder for restaurant pager
systems (JianTao JT-913 and similar). Decodes system ID,
pager address, and function code (buzz/sync).
* Show friendly pager details in SubGhzD view
* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* filters OK, radio configurations set
* all modes are working, noise still needs work, especially in FM. A baseband enum is also needed
* audio and decoding fixed, clipping and the baseband enum are still missing
* USB receive good
* LSB receive good
* all mode receive good, log is dead
* frequency measurement good, decode dead
* total killed
* szutyok, gerjed
* frequenty meas only.
* ui ok
* Add frequency measurement handling and update Morse processing logic
* fix ssb speed
* Add FLEX pager support
- Introduced a new FLEX configuration function in baseband_api.
- Added FLEX application view and associated UI elements.
- Implemented FLEX processing logic in proc_flex, including demodulation and message handling.
- Updated CMakeLists to include new FLEX source files and headers.
- Enhanced message system to support FLEX-specific messages and statistics.
This commit lays the groundwork for FLEX pager functionality, allowing for the reception and processing of FLEX messages.
* Fixed baseband and moved app to external with some other fixes.
* Format code
---------
Co-authored-by: RocketGod <57732082+RocketGod-git@users.noreply.github.com>
* Implementation of EPIRB receiver
* Baseband processing of EPIRB signal
* UI to ddecode and display EPIRB message with display on a map
* External application
* External proc element
* Delete CLAUDE.md
* Work on BLE Rx Tx improvements.
* Working on compile size.
* cleanup
* Formatting
* Fixes
* More Improvements + Custom Parsing for Tags
* Moving ERT to external apps.
* Fix Icon.
gullradriel
VasylSamoilov
Totoo
Pezsma
Ryan Harden
Frederic BORRY
Sarah Rose
stafur
jLynx
zxkmm
E.T.
Jeff Laflamme
lifegame1lu111
StarVore Labs
Tim Elfelt
Arne Luehrs
Netro