2c778b72e2
Wrong S3 region.
2015-09-01 15:15:24 -07:00
72a59c3dae
Fix cwd when uploading release files.
2015-09-01 15:07:31 -07:00
a06ee31566
Make release and post on S3.
2015-09-01 14:53:40 -07:00
57ec7aac41
Remove container stuff.
2015-09-01 14:53:40 -07:00
340fc4dd83
Override compilers.
2015-09-01 14:53:40 -07:00
61d765aeac
before_install vs. before_script? No idea...
2015-09-01 14:53:40 -07:00
e96895d18c
Container's not flexible enough, back to the old approach.
2015-09-01 14:53:40 -07:00
e0c313b240
Switch to shiny container.
2015-09-01 14:53:40 -07:00
8b465a593e
Whitespace, huh? OK...
2015-09-01 14:53:40 -07:00
0f39d52f48
More Travis CI stumbling.
2015-09-01 14:53:39 -07:00
92674706ed
Oops, bad Travis CI .yml syntax.
2015-09-01 14:53:39 -07:00
0fd2dcf04a
Experimenting with Travis CI for firmware builds.
2015-09-01 14:53:39 -07:00
4846557f12
Missed spots when renaming REVISION to GIT_REVISION.
2015-09-01 14:21:40 -07:00
5d8c636f40
Halt M4 right after sending M0 the shutdown message.
...
Addresses issue #55 .
2015-09-01 13:49:09 -07:00
805442d46f
Allow KiCad to update metadata.
2015-09-01 11:10:50 -07:00
d9568f7f47
Update date code to 20150901.
2015-09-01 11:09:19 -07:00
1c2b3b82ce
Update layers exported during PCB plot.
2015-09-01 10:17:30 -07:00
73e9dabf72
Change default layer visibility.
2015-09-01 10:14:36 -07:00
f3f5a9647b
Board stack-up drawing clean-up.
2015-09-01 10:13:51 -07:00
e979b9b64d
Change drawing lines width to 0.1mm.
2015-09-01 10:02:07 -07:00
968ec6d176
Change PCB stack-up for vendor.
2015-09-01 10:01:39 -07:00
128dda23bb
Note about separate PTH and NPTH drill files.
2015-08-30 17:23:53 -07:00
85f9b4cdc5
Add default dimension units note.
2015-08-30 17:18:14 -07:00
c5cd3a4498
Add title block with copyright, license.
2015-08-30 17:12:32 -07:00
d2436ca229
Add notes block.
2015-08-30 17:11:59 -07:00
18b272bcab
Add PCB dimensions
2015-08-30 16:24:07 -07:00
d3acd79df8
Add PCB stack data and diagram.
2015-08-30 16:23:55 -07:00
375cf6f238
Tighten solder mask around LCD connector.
...
Shooting for 4mil mask web between pads.
2015-08-30 14:35:04 -07:00
84b92365f9
Move and shrink copper layer legend.
...
Doesn't need to be visible after assembly. I think.
2015-08-30 10:14:36 -07:00
ea2cfb7ad2
Center text in layer legend.
2015-08-30 09:42:47 -07:00
732561d01c
Change vias to 13mil, 7mil annular ring.
...
Was 13.5mm, but why?!?
2015-08-29 22:31:29 -07:00
1340991dba
Reduce solder mask margin on WM8731.
...
Trying to squeeze some mask web in there!
2015-08-29 18:14:23 -07:00
56c7c31cbb
More footprint units cleanup.
2015-08-29 17:54:26 -07:00
bda376df4b
KiCad added courtyard layers.
2015-08-29 17:20:41 -07:00
436e6fd21b
Footprint cleanup
...
Remove courtyard lines from silkscreen.
Round coordinates/dimensions to correct values (KiCad's old units don't convert nicely to the new units).
Restore U3 refdes silkscreen visibility.
2015-08-29 17:14:06 -07:00
c78b7fe196
Reduce mask margin on QFP pads.
2015-08-29 16:12:45 -07:00
d61f3802cb
Remove line in/out components and traces, microphone.
...
Clean up traces and via stitching affected by removed components.
2015-08-27 16:54:38 -07:00
29243a5fd1
Schematic and netlist from schematic modifications.
2015-08-27 16:54:38 -07:00
70d7ecc51b
Clean up PCB net labels to match code, CPLD.
2015-08-27 16:54:38 -07:00
75d9aa9c73
Remove extra CPLD code internal signals.
2015-08-27 16:54:38 -07:00
19764ce693
Swap function of P2_8, P2_4 in schematic, firmware, CPLD.
...
gpio_unused: P2_4 -> P2_8
gpio_lcd_rd: P2_8 -> P2_4
P2_8 is a very long line, shared with DFU button.
Revise schematic to match CPLD signal names.
2015-08-27 16:54:38 -07:00
b6e25692dc
Label 1V8 regulator bypass/adjust capacitor as DNI.
...
Was already DNI in assembly BOM. TCR2EF shows that pin as NC.
2015-08-27 16:54:38 -07:00
1ca4f45d9e
Change VBAT capacitor to DNI.
...
HackRF One has 100nF capacitor on VBAT. Having 10uF capacitor on PortaPack VBAT may slowly drain the coin cell when in storage, and add a bit of leakage current when installed.
2015-08-27 16:54:38 -07:00
8dfd68a6b3
Removed electret microphone.
2015-08-27 16:54:37 -07:00
cd4840f1f9
Remove line in/out circuitry.
2015-08-27 16:54:37 -07:00
84ffaaef33
Back-annotate CVPCB data into schematic.
...
Remove CVPCB .cmp file, since it's a deprecated by the KiCad project.
2015-08-27 16:54:37 -07:00
bf4521bf35
Update schematic issue/copyright date.
...
KiCad also made some automatic tweaks for latest build (bzr 6109).
2015-08-27 16:54:37 -07:00
3fea68d777
Adjust wideband specan gain to match other modes.
2015-08-27 14:57:05 -07:00
b13081696d
Simplify MessageQueue pop() usage.
2015-08-27 14:35:17 -07:00
d8b3b4cb6b
Check queue empty only once when reading messages.
...
There was a second is_empty() call hidden in the pop() call, so the while(condition) was redundant.
2015-08-27 14:27:29 -07:00
Jared Boone