* Cleaned up #ifndef PRALINE and updated logic to being with #ifdef PRALINE entries where possible to make logic flow for PRALINE code execution pipeline clearer. Cleaned up compiletime warnings for PRALINE related codebase updates.
* Addressed comments provided by copilot during PR review. Combed through frequency definitions for consistency between PLL A and PLL B register definitions for CLKs 0-7. Ensured CLK3/LK6 <- SMA PORTs and CLK7 <- not utiliized are disabled during core development phase to support root cause analysis of any spectral artifacts. Updated MCU frequency to 40MHz to ensure audio harmonics are outside FM radio band range (< 80 MHz, >120MHz) and added comments clarifying choice of 40 over 10 MHz for potential future root cause analysis in other bands where audio may be expected as needed. Added CLK6 and CLK7 to Clocks Status View Debug display. Moved CLK defintions and PLL instantiations for components that are most RF sensitive to PLL A. Left others in PLL B. That is move FPGA CLK1 to PLL B, while moving CLK2, CLK4, and CLK5 to PLL A.
* Cleaned up PLL A and B XTAL reference checks relative to 800 MHz.
* Updated PRALINE audio processing methods to account for potential slip in 25MHz reference clock. Moved all clocks to PLLB except for CLK0 to isolate the ADC from potential EMI and clock spills from the other clocks to CLK0. Added PLL reference to Clock ui_debug display and added debug view for PLLA and PLLB. Updated PRO menu in analog_audio_app to allow for 100Hz resolution in sample rate for finer control of samplerate debugging of crackling noise artifacts. Updated ppb method and set it for account for a potential 49 Hz shift in the PRALINE crystal. Started instatiating methods for synchronized DMA transfers for the spectrogram since the FFT calculations and the LCD data updates appear to be related to the crackling noise.
* Added firmware/flash.h to .gitignore.
* Changed reference clock for start_audio_pll to 40MHz instead of ~12MHz xtal. Moved clocks around to reflect best audio quality in analog_audio_app at 3.072 MHz sample frequency.
* Ran format-code.sh.
* Removed ppb in set_sampling_frequency since it created aliasing in analog_audio_app.
* Expanded baseband_bandwidth back to 1750000 after testing since audio quality was retained.
* Updated comments to address copilot recommendations where acceptable.
* Removed firmware/flashsize.h from .gitignore as coordinated with @gullradriel.
* Addressed clock inversion and fractiona/interger states. Created ui_debug display that checks expected clock frequencies for expected 3.072 MHz sampling frequency commonly utilizaed in portapack apps.
* Ran format-code.sh
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Fixed 0x03 mode for DC/Q-INV/Q-SHFT being set at every tuning and sample rate change. This was the root cause for loss of bluetooth before. Sample rate, and frequency can now be changed without need for manually resetting DC/Q-INV/Q-SHIFT settings. Updated method for setting frequncies in praline so that we have more testing options.
* Ran format-code.sh and cleaned up stale comments.
* Addressed comments, and removed commented line, opting for higher register values, 5E and 5D. Added WFM Debug View to support testing demodulation ringing.
* Addressed comments in PR conversation to clean comments and ensure consistency at initializtion accross updated methods and displays.
* Ran format-code.sh
* Set initial legacy state. Improved readability of clocking initialization settings. Updated set_sampling_frequency, and udpate_bandwidth to set decimation values in the fpga_registers to avoid aliasing in low band frequencies.
* Updated clock_manager to use correct clock and clock parameters for audio pll. Ran format-code.sh.
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* Fixed 0x03 mode for DC/Q-INV/Q-SHFT being set at every tuning and sample rate change. This was the root cause for loss of bluetooth before. Sample rate, and frequency can now be changed without need for manually resetting DC/Q-INV/Q-SHIFT settings. Updated method for setting frequncies in praline so that we have more testing options.
* Ran format-code.sh and cleaned up stale comments.
* Addressed comments, and removed commented line, opting for higher register values, 5E and 5D. Added WFM Debug View to support testing demodulation ringing.
* Addressed comments in PR conversation to clean comments and ensure consistency at initializtion accross updated methods and displays.
* Ran format-code.sh
* Added PRO button to analog_audio.cpp for debugging metallic ringing sounds in Audio app. Ensured consitency to 4MHz in analog_audio.cpp
* Restored blutooth after loss.
* Added several sampling rates to analog_audio for testing.
* Ran format-code.sh
* static vars so no external linkage is possible
* persistent settings and no more global living variables
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* adding zoom_factor to app settings
* separated zoom_factor settings for AM and AMFM
* fix order so zoom factor is also applied correctly on modulation change
* fix zoom not applied when changing bandwidth
* temporary disable the Scanner so we are not breaking the nightly. Until we are choosing to finally remove it or find a better solution
---------
Co-authored-by: gullradriel <3157857+gullradriel@users.noreply.github.com>
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* changed order of modulations, changed case to avoid capture
* added missing AMAudioFMApt mode to dump pmem
* reorder demod, adding missing ones, fix warnings
* removed uneeded 'previous_modulation', renamed WFAX to AMFM to match other places
* removing uneeded 'previous_modulation' uneeded check in change_modulation
* move capture at the end so AMAUdioFMApt is matching the other arrays for position 4
* added AMFM to Recon Level and Scanner
* clang + more details in some comments
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* WIP RadioState init
* TX/RX cleanup
* Update all apps using RadioState and setting modulation mode
* Set apps to use AM mode
* Don't push modulation update in RadioState.
* Support passing overrides to Audio and MicTX
* Support set_nearest on OptionsField, fix recon step
* Fix audio, typo
---------
Co-authored-by: kallanreed <kylereed@manzana.lan>
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Generate CTCSS messages at fixed rate regardless of tone freq
* Generate CTCSS messages at fixed rate regardless of tone freq
* Function for generating CTCSS description strings
* Function for generating CTCSS description strings
* Increase width of CTCSS text to include tone freq
* Increase width of CTCSS text field to include frequency
* Use CTCSS tone freq when saving HAM freqs to freq file
* Use function in tone_key.cpp for displaying CTCSS string
* Use function in tone_key.cpp for CTCSS descr strings
* Use function in tone_key.cpp for CTCSS descr strings
* Clang test
* Clang
* Clang
* Support for reading CTCSS tones from FreqMan file
* Clang
* Clean up and eliminate floating point
* Clean up and eliminate floating point
* Corrected CTCSS field length
* Corrected CTCSS field length
* Clang
* Consolidate styles into a Styles class and clean up code
* Format
* Add style_bg_dark_grey for nav bar
* Fix bugs found in PR
* Rename styles
* Add bg_white style
---------
Co-authored-by: kallanreed <kallanreed@outlook.com>
Co-authored-by: gullradriel <3157857+gullradriel@users.noreply.github.com>
* Put WFM bandwidth options in ascending order
* Put WFM bandwidth options in ascending order
* Put WFM bandwidth options in ascending order
* Put WFM bandwidth options in ascending order
* Put WFM bandwidth options in ascending order
* Clang formatting attempt
* OptionsField wrapping - for your consideration
Perhaps if OptionsWidget supported wrapping, then it would be easier to dial through all available options without having to know which direction to turn the dial.
stafur
Brumi-2021
gullradriel
Totoo
Mark Thompson
Kyle Reed
Kyle Reed
jLynx
GullCode
heurist1
formtapez
Arjan Onwezen
notpike
Белоусов Олег
Erwin Ried
furrtek