* Initial commit and pr for HackRF Pro (praline) arch-port to mayhem-firmware. Please see https://github.com/portapack-mayhem/mayhem-firmware/issues/2957. Added flash specifics for -DBOARD=PRALINE. This firmware only builds with toolchain v9.2.1 if hackrf codebase has -B arm in firmware/hackrf_usb/CMakeLists.txt.
* Updated CMakeLists.txt per coordination with @HtoToo. For -DBOARD=PRALINE FLASH_MB_SIZE and FLASH_MB_LIMIT_SIZE are now 4. Removed praline specific variable for FLASH limits.
* Updated chibios-portapack's board.cpp to support initialization of the HachRF-Pro (praline) FPGA. Added append_fpga_bitstream.py tool to ensure that praline_fgpa.bin bitstream can be appended to -DBOARD=PRALINE produced firmware. In order to ensure successful execution of append_fpga_bitstream.py to append the fpga bitstream we should expect that the bistsream will be located at 0x180000 in flash. This requires that FLASH_MB_LIMIT_SIZE must be 1.5, and FLASH_BYTES_LIMIT_SIZE must be 1535 * 1024. If we want to allow more or less space for the base firmware image sans the fpga bitstream the location of the bistream must be moved to a location other than 0x180000.
* Updated location of praline_fpga.bin bitstream to 0x380000 to allow more room for firmware. Firmware now has 3.5MB, or 2MB more available than before as coordinated with @HTotoo.
* Expanded #ifndef PRALINE to include og and r9 gpio and pin setup as coordinated with @HTotoo.
* Added note for PRALINE FLASH_MB_LIMIT_SIZE and FLASH_BYTES_LIMIT_SIZE to explain why we are using the 3.5 and 3584 values respectively as coordinated with @HTotoo.
* Next round of modifications derived heavily, if not entirely from work done by @banandana at https://github.com/Banandana/mayhem-firmware. This commit should power on the HackRF Pro (praline) display, power on the fpga, and enable gpio, and provide debug utilties. There is still a lot of work to be done to fully enable the new praline board with this build and firmware architectural porting effort. However, hackrf-one boards do not seem to be adversely impacted by the #ifdef PRALINE statements, and CMakeLists updates, as far as I have been able to test.
* Ran format-code.sh. Updates for this commit are only due to formatting. Tested builds and they seem to work as exptected.
* Addressed fixes in firmware/application and firmware/baseband. Stream now flows to capture and looking glass. Issues were related to thread management. Issues were originally addressed by @banandana.
* Ran format-code.sh to allow for consistency with autoamted clang checks.
* Update hackrf ref repo to mayhem-portapack-hackrf next from https://github.com/portapack-mayhem/hackrf
* Addressed format edits necessary to pass clang-format check.
* Starting addressing Si5351 Clocks for radio sampling. These updates correctly set the Si5351 clock at start up. There appears to be an issue during runtime when testing with RX Test Init, Capture and Looking glass.
* Updated clock_manager.cpp to restore correct function introduced by @banandana when testing with Rx Test Init.
* Switched to using decimation for setting the sample rate without changing the Si5351 clock. This assumes that for the praline board Si5351 CLK0 runs at fixed 8 MHz (constant) and the FPGA decimates to get the desired sample rate. For example, for a 1 MHz sample rate -> Si5351 outputs 8 MHz, FPGA decimates by 8. There is still more work needed here, and potential verification that this is the correct way to operate with this new archteitecture.
* After deliberating on hackrf_usb hackrf_core.c and radio.c, and reviewing firmware/application/hw/si5351.cpp the original approach of using the aproach detailed in hackrf_core.c sample_rate_frac_set() lines 580-582, via the implementation in firmware/application/hw/si5351.cpp seems like the best place to continue testing efforts.
* Tested at ~2.4GHz (2.3 - 2.5) with lookgin glass and was able to receive signals. Added a Signal Path debug app to test gains, and readio mode (receive/transmit).
* Added two debug apps for the RFFC507x. Status View and Tuning View. This helped debug some of the potential issues with tuning.
* update submodule
* format code
* Small touch up merging latest next and ensuring build for HackRF One.
* Reverted edits to re: firmware/baseband/sd_over_usb/scsi.c and firmware/application/portapack.cpp. Source now builds, had to pull latest hackrf submodule.
* Skipped detect hardware for praline board to avoid backscreen in HackRF Pro praline board.
---------
Co-authored-by: gullradriel <gullradriel@users.noreply.github.com>
* Work on BLE Rx Tx improvements.
* Working on compile size.
* cleanup
* Formatting
* Fixes
* More Improvements + Custom Parsing for Tags
* Moving ERT to external apps.
* Fix Icon.
* removing ability to focus on RSSI bars and to launch level app, until a solution to launch external apps from internal ones is given
* externalize Level app
* adding zoom_factor to app settings
* separated zoom_factor settings for AM and AMFM
* fix order so zoom factor is also applied correctly on modulation change
* fix zoom not applied when changing bandwidth
* temporary disable the Scanner so we are not breaking the nightly. Until we are choosing to finally remove it or find a better solution
---------
Co-authored-by: gullradriel <3157857+gullradriel@users.noreply.github.com>
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* revert custom compiler definition since we are now having correct hackrf m0 implementation
* update submodule
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* adding ook_file.cpp
* aligned GUI, change low_bit to pause, start to use ook_file API
* bit duration, pause, fields step, indent
* working OOK file loading
* revamped GUI with the decided names and units
* read, start tx, stop tx in ook_file API
* cleanings, using ook_file_data and API to load, save, send, stop tx
* renamed text widget
* moved set target frequency to start_ook_file_tx function
* comments, took out a function to put it in API
* removed non working Tesla OOK files
* changed space to tab
* set author information
* Renamed to OOKEditor
* removing ui_fsk_rx.cpp from targets
* removing unneeded ui_fsk_rx.hpp from includes
* deleting the now unused ui_fsk_rx.cpp and hpp files
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* message on dev list change
* dc detect
* added sht3x sensor.
* separete environment data from light
* max17055 moved to i2c dev
* sht fix, goterror detection fix
* fix ext sensor app display for a lot of devices.
* added bh1750 driver
* autoscan on main view
* added devlist mutex
* better timing
* fix h2 sw8 on poweron by usb
This pull requests adds a new type of external app to the firmware: The standalone app.
Pros:
Will work after an upgrade.
Size of image is only limited by shared heap size of M0 (application) (64kb total).
Cons:
No full access to all functions in the main firmware. One well defined (and versioned) API handles all communication.
The Pacman app was converted to be the first the the new kind.
* BMP initial
* Add vscode debug configuration as a template (#2109)
* usb serial debug interface & usb serial async msg (#2111)
* add serial_debug
* not use OSS
* add path print
* add string print and vec
* clean up
* clean up
* format
* add an async blocking bool
* add an async blocking bool - comment
* protect the unexpected tx
* naming
* remove demo code
* fix bottom-up format, and add auto extend, ..
* bmp write
* Minor additions
* Minor
* overwrite on create
* Tmp
* Basic view - WIP
* debug
* add literal str print in asyncmsg (#2113)
* add literal str print in asyncmsg
* remove debug things
* accept suggestion per gull
* fix documentary
* Fix bug (#2114)
* Disable Back button during Touch Calibration (#2115)
* ADS1100 (#2116)
* WIP
* WIP
* WIP
* Corrected name
* WIP
* WIP
* WIP
* WIP
* Added new calc
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* Added debug serial lines
* WIP
* Fixed issue
* Fixed calculation issue
* Added voltage to performance DFU menu
* Added padding function and added voltage to perf menu
* Clean up
* Refactor
* Fixed linting
* Hides voltage if PP does not conatin IC
* WIP showing battery %
* made the percentage a int
* Added % to header
* Removed test UI
* Removed comment
* Added fix for precision too large
* Added fix for precision too large
* Linting
* widget
* auto zoom
* remove debug
* move in screen
* fix math
* remove test code
* fix
* fix compiler warning
* BMP File viewer
* Full screen
* bg instead of noice
* add comment
* Handle some not supported formats.
---------
Co-authored-by: E.T <tamas@eisenberger.hu>
Co-authored-by: sommermorgentraum <24917424+zxkmm@users.noreply.github.com>
Co-authored-by: Mark Thompson <129641948+NotherNgineer@users.noreply.github.com>
Co-authored-by: jLynx <admin@jlynx.net>
* WIP
* WIP
* WIP
* Corrected name
* WIP
* WIP
* WIP
* WIP
* Added new calc
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* Added debug serial lines
* WIP
* Fixed issue
* Fixed calculation issue
* Added voltage to performance DFU menu
* Added padding function and added voltage to perf menu
* Clean up
* Refactor
* Fixed linting
* Hides voltage if PP does not conatin IC
* WIP showing battery %
* made the percentage a int
* Added % to header
* Removed test UI
* Removed comment
* Added fix for precision too large
* Added fix for precision too large
* Linting
Totoo
Sandbox
lifegame1lu111
stafur
E.T.
zxkmm
Netro
Oleg Belousov
gullradriel
Brumi-2021
sommermorgentraum
Bernd Herzog
jLynx
Mark Thompson