* updated submodule
* usb_serial: populate usb_device before usb_run. Upstream now leaves the global usb_device zero-initialized and expects hackrf_usb.c to memcpy a per-board const into it. We don't link hackrf_usb.c, so do the memcpy here. Also flip control_in to enable_zlp=true to match the new endpoint API.
* baseband: derive IS_* board defines from BOARD. Upstream moved platform IS_* macros from platform_detect.h to cmake. Set them per BOARD here since we don't include platform-detect.cmake. Drop the duplicate clkin.c entry.
* sd_over_usb: drop duplicate driver objects, fix setup callback. Upstream now defines i2c0/i2c1, spi_bus_ssp0/1, sgpio_config and rf_path in the common driver files, so stop redefining them here and patch the runtime fields in pin_setup() instead. Update si5351c_reset_pll() call to the two-arg form. Replace the no-op transceiver_usb_setup_complete stub with one that delegates to usb_setup_complete.
* sd_over_usb: populate usb_device before usb_run. Same fix as the application side: memcpy a const template into usb_device before usb_device_init/usb_run, otherwise the descriptor pointer is NULL. Also pass enable_zlp=true on control_in to match the new endpoint API.
* fix unicode in comment
* remove lz4 bufs reservation in M0
* First step to EPIRB rx app fix
* Added spike filtering on carrier detection for more robustness.
* Created dedicated packet builder
* First step to fixing UI.
* First step to epirb-rx ui rework.
* Made static methods static members
* Code optim
* Code cleanup + first step to new UI
* Fixed display
* Added BeaconList widget + BeaconDB
* Epirb TX app memory optim
* Fixed OOM when opening Map Display or Locator editor on EPIRB TX app
* First step to tabs + code cleanup to free some space...
* Added spectrum analyzer + fixed display
* Fixed display refresh issue after leaving spectrum.
* More code optim + first step to detail view.
* Fixed float coord display.
* Fixed protocol names
* Fixed location display
* Externalized country base to sd card + more code optim
* Fixed country display
* Fixed path
* Added protocol description and resource manager
* Added main/aux loc device
* Removed specan to save space
* First step to adding QR code
* Used a custom TextArea component instead of Console
* Fixed QR code display for map URL
* Added beacon selection management + fixes
* First step to map/data qr.
* QR tab : added data + detail/map toggle
* Removed sqhelch to save space
* Removed audio to save space
* Removed freq label to save space
* Removed packet timestamp to save space
* Moved frequency values to resource file
* Fixed detection parameters to suite real beacons (slower phase shift time).
* Fixed countdown field size
* Fixed frequency list.
* Fixed detail view on select.
* First step to fix settings.
* Fixed squelch for a 0-99 range.
* Added bch code correction (single bit error).
* More code optim, disable country cache, removed inline from location to reduce code size.
* Removed inline, code formatting.
* Added bch code correction display.
* Fixed focus bug, fixed packet size check. Added BCH1/BCH2 correction test cases in BEACONS.TXT file for EPIRB TX application.
* Fixed merge
* Added countdown setting.
* Added selection display to beacon list
* Restored squelch control. Added countdown reset.
* Code optim on formatSummary
* More code optim
* Made ResourceManager methods static
* Externalized beacon strings to res file
*Removed frame parameter from methods
* Added test beacons for emergency. Removed old res file.
* Fixed resource manager
* Fixed resources. Added emergency display.
* BCH + res fixes
* Fixed beacons
* Fixed app color. Fixed HexId and Serial calculation.
* Fixed frequency list. Comments.
* Code cleanup and comments
* Added slideshow mode to EPIRB TX application. Code comments / cleanup.
* Fixed frame end after wrong code cleanup
* More code optim and comments. Removed touch from beacon list.
* Added beacon selection with encoder on detail view.
* Added beacon paging in header. Fixed timeout display
* Fixed build for PRALINE
* Fixed formatting
* Potential fix for pull request finding
* stop on carriage return
* empty string if unknown
* zeroing data buffer before use
* fix typo
* add include
* fix case if pair == 0
* fix scpectrum_on to spectrum_on
* fix typos
* replaced 3 inlined offset blocks with apply_offset calls
* set_beacon consolidation
* Fix BLE RX RSSI and Channel scale
* Properly reset gradient index 0
* Use move constructor in MenuView::add_item
* Avoid erasing during iteration
* Fix gradient rounding. Extend to end of table
* Add comment to add_item
- Fix long-address numeric message decoding: read body[0] from Vy (j+1)
for multi-word messages, from w1 for single-word. Fix MF word count
for long addresses (n_field words, not n_field+1).
- Fix long-address short message: read 5 additional BCD digits from Vy
for 8-digit decode.
- Fix BCD table: index 10 is '.' (dot) not ' ' (space) in both RX and TX.
- Clean up address decode: identify address type by value range per
Table 3.8.1-1. Remove is_group/is_temp_group from packet structs.
- Rename SMSG to SHORT. Format message payload directly in baseband:
TONE, NUM abc, SRC N, SRC N N=M R=R, RESERVED hex.
- Add BIW1 heartbeat packet (biw_field=0xFF) on every decoded frame.
- Move timezone table to file scope, simplify console log_message,
add No signal initial status, simplify serial BIW output format.
Use per-character error tracking to substitute '?' when a
character's bits came from an uncorrectable codeword (BCH error_count >= 3).
Previously these displayed as garbage.
External app for encoding and transmitting FLEX pager frames at
1600bps/2FSK. Supports short (1-1,933,312) and long (2,101,249-
4,297,068,542) addresses across all encoding sets (1-2, 1-3/1-4, 2-3).
Message types:
- Alphanumeric (vector type 5): 7-bit chars, signature, K checksum
- Standard Numeric (vector type 3): 4-bit BCD, K checksum
- Short/tone-only (vector type 2): space-filled BCD in vector word
- Short numeric (vector type 2): BCD digits in vector word (3/8 digits)
Frame structure:
- FIW (Frame Information Word): cycle, frame, roaming flag
- BIW (Block Information Word) support with up to 3 extra words:
Date, Time, SysInfo/timezone+DST, SSID1 (Simulcast System ID:
Local ID + Coverage Zone), SSID2 (Country Code)
- BCH(31,21) encoding with bit reversal, block interleaving
- Two frames per TX: message R=1 (new) then R=0 (duplicate)
- Message number N (0-63): random seed from RTC, auto-increments
- ERS (Emergency Re-Sync) burst: configurable N x 42-cycle bursts
with 8-cycle preamble per frame
UI:
- Capcode info line: address type, computed frame/phase (reference)
- TX status: step counter with ERS/frame progress
- Set params view: Date/Time/TZ/DST, LocID/CovZone, CountryCode,
Roaming, message number, ERS count
- Date/time auto-populated from RTC with calendar-equivalent year
mapping for years beyond 2025 (per ARIB STD-43A)
- Year validation with equiv-year popup for out-of-range values
- Capcode and BIW flags persisted via SettingsManager
Serial interface:
- sendflex <capcode> <type> <msglen> + payload
- Types: 0=alpha, 1=numeric, 2=short/tone, 3=short numeric
- FlexTosendMessage (ID 103) for serial-to-app communication
- App must be open to receive serial commands
RX: fix address/batch-boundary handling, add numeric continuation,
add heuristic type detection toggle, pass inverted polarity flag,
stream decoded messages over USB serial.
TX: rename phase to polarity (Standard/Inverted), fix function
validation (&&→||), fix serial shell payload read (offset tracking,
31-byte cap, preserve msglen).
Decoder: remove color escapes from output (plain text for all
consumers), guard count_alpha_fill against empty string, keep
numeric_len across continuation batches.
Serial format: POCSAG <baud> <addr> <func> <pol> <type> "<msg>" hex:<hex>
Quote escaping for embedded " and \\ in alpha messages.
* make detector list a freqman file
* add file loading ability, autoscan/pause, step in on pause on range, frequency value display
* Update firmware/application/external/detector_rx/ui_detector_rx.hpp
* Update firmware/application/external/detector_rx/ui_detector_rx.cpp
* add 750 kHz step
* revamp UI and add auto advance, auto scan, and only display 'RANGE SCAN...' when auto scan is on on ranges to avoid flicker of the hell.
* adjust as I can the ranges as they where before
* Update sdcard/FREQMAN/DETECTOR.TXT
* fix instance related copilot remark
* update hackrf submodule
* add platform_gpio.c and platform_scu.c to baseband build
-New source files required by the updated hackrf submodule.
* adapt scsi.c to updated hackrf API
-Rename struct gpio_t to struct gpio and add gpio_lpc.h include.
* adapt hackrf_core.c to updated hackrf API
- Rename struct gpio_t to struct gpio throughout
- Add platform_gpio.h, platform_scu.h, and fixed_point.h includes
- Update pin_setup() to use platform_scu() accessor instead of SCU_ macros
- Rewrite sample_rate_set() to use new fixed-point frequency API
- Update ssp_config_w25q80bv for changed struct layout
- Update si5351c and max283x function call signatures
qwer123
Totoo
Pezsma
未来方舟
gullradriel
Frederic BORRY
Synray
janhaverkamp
VasylSamoilov
Ryan Harden
zxkmm
jLynx