tinygo-org/tinygo
1
0
Fork 0
mirror of https://github.com/tinygo-org/tinygo.git synced 2026-08-03 18:47:47 +00:00
Code Issues Packages Projects Releases 6 Wiki Activity
Files
b5b2600b7bd6fd1f0f5d27cf995b02c6f9fb9141
tinygo/src/machine
T
History
Ayke van Laethem b5b2600b7b fe310: add support for bit banging drivers 
This is necessary to add support for WS2812.
2021-10-21 08:14:34 +02:00
..
adc.go
accept configuration struct for ADC parameters (#1533)
2021-01-31 14:54:27 -06:00
board_arduino_mega1280.go
Arduino Mega 1280 support
2021-04-12 11:03:13 +02:00
board_arduino_mega2560.go
machine: fix atmega2560 mapping for pins D2 and D5
2020-07-05 21:18:20 +02:00
board_arduino_mkr1000.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_arduino_mkrwifi1010.go
machine/arduino_mkrwifi1010: fix pin definition of NINA_RESETN
2021-09-05 14:10:25 +02:00
board_arduino_nano33_baremetal.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
board_arduino_nano33.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
board_arduino_nano.go
avr: use standard pin numbering
2020-05-12 08:16:34 +02:00
board_arduino_zero.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_arduino.go
avr: use standard pin numbering
2020-05-12 08:16:34 +02:00
board_atmega328p.go
avr: use standard pin numbering
2020-05-12 08:16:34 +02:00
board_atsamd21.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_atsame54-xpro.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_bluepill.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_circuitplay_bluefruit.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_circuitplay_express_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_circuitplay_express.go
machine: add definition for ws2812
2021-06-16 07:32:39 +02:00
board_clue_alpha.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_digispark.go
avr: clean up ATtiny definitions
2020-03-25 19:47:36 +01:00
board_esp32-coreboard-v2.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_fe310.go
machine/hifive1b: fix compiling in simulation (wasm)
2019-10-31 12:03:35 +01:00
board_feather_rp2040.go
feather-stm32f405, feather-rp2040: add I2C pin names
2021-09-27 12:37:26 +02:00
board_feather-m0.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_feather-m4_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_feather-m4-can.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_feather-m4.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_feather-nrf52840-sense.go
machine/feather-nrf52: fix pin definition of uart
2021-07-20 17:45:41 +02:00
board_feather-nrf52840.go
machine/feather-nrf52: fix pin definition of uart
2021-07-20 17:45:41 +02:00
board_feather-stm32f405.go
feather-stm32f405, feather-rp2040: add I2C pin names
2021-09-27 12:37:26 +02:00
board_grandcentral-m4_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_grandcentral-m4.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_hifive1b_baremetal.go
machine: make machine.I2C0 and similar objects pointers
2021-03-29 02:02:04 +02:00
board_hifive1b.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_itsybitsy-m0.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_itsybitsy-m4_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_itsybitsy-m4.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_itsybitsy-nrf52840.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_k210.go
all: changeover to eliminate all direct use of master/slave terminology
2020-07-23 22:45:23 +02:00
board_lgt92.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_m5stack_core2.go
board: add M5Stack Core2
2021-10-20 20:28:47 +02:00
board_maixbit_baremetal.go
machine: make machine.I2C0 and similar objects pointers
2021-03-29 02:02:04 +02:00
board_maixbit.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_matrixportal-m4_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_matrixportal-m4.go
machine: add definition for ws2812
2021-06-16 07:32:39 +02:00
board_mdbt50qrx.go
board: add Raytac MDBT50Q-RX Dongle with TinyUF2
2021-09-08 12:40:49 +02:00
board_metro-m4-airlift_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_metro-m4-airlift.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_microbit-v2.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_microbit.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nano-33-ble.go
targets: add serial key to JSON files for newly added rp2040 boards, and also nano-33-ble board
2021-06-25 22:06:16 +02:00
board_nano-rp2040.go
board/nano-rp2040: define NINA_SPI and fix wifinina pins
2021-09-01 17:24:19 +02:00
board_nicenano.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nodemcu.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nrf52840-mdk-usb-dongle.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nrf52840-mdk.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nucleof103rb.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nucleof722ze.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nucleol031k6.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nucleol432kc.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_nucleol552ze.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_p1am-100_baremetal.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
board_p1am-100.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
board_particle_argon.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_particle_boron.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_particle_xenon.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pca10031.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pca10040.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pca10056.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pca10059.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pico.go
machine/rp2040: add I2C support (#2013)
2021-08-06 17:22:50 +02:00
board_pinetime-devkit0.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pybadge_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_pybadge.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pygamer.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_pyportal_baremetal.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_pyportal.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_qtpy.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_reelboard.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_stm32f4disco.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_teensy36.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_teensy40.go
teensy40: enable hardware UART reconfiguration, fix receive watermark interrupt
2021-09-13 09:29:20 +02:00
board_trinket.go
targets: add DefaultUART to adafruit boards
2021-09-09 15:58:35 +02:00
board_wioterminal_baremetal.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
board_wioterminal.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_x9pro.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
board_xiao.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
buffer.go
Working on NXP/Teensy support
2020-07-08 21:58:15 +02:00
i2c.go
machine/rp2040: add I2C support (#2013)
2021-08-06 17:22:50 +02:00
i2s.go
all: changeover to eliminate all direct use of master/slave terminology
2020-07-23 22:45:23 +02:00
machine_atmega328p.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
machine_atmega328pb.go
Add SPI support for Atmega based chips.
2021-02-10 12:56:48 +01:00
machine_atmega1280.go
Make fmt-check happy again
2021-04-17 00:01:37 +02:00
machine_atmega1284p.go
Add SPI support for Atmega based chips.
2021-02-10 12:56:48 +01:00
machine_atmega2560.go
Add SPI support for Atmega based chips.
2021-02-10 12:56:48 +01:00
machine_atmega.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
machine_atsamd21.go
machine: fix copy-paste error for atsamd21/51 calibTrim block
2021-09-10 18:07:17 +02:00
machine_atsamd21e18.go
machine: refactor pins to be of Pin type
2019-05-26 20:48:50 +02:00
machine_atsamd21g18.go
Use runtime/volatile.T.ReplaceBits
2020-07-14 06:08:08 +02:00
machine_atsamd51.go
machine: fix copy-paste error for atsamd21/51 calibTrim block
2021-09-10 18:07:17 +02:00
machine_atsamd51g19.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
machine_atsamd51j19.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
machine_atsamd51j20.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
machine_atsamd51p19.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
machine_atsamd51p20.go
atsamd51: fix PWM support in atsamd51p20
2021-04-21 15:02:47 +02:00
machine_atsame5x_can.go
atsame5x: add support for CAN
2021-05-10 12:27:10 +02:00
machine_atsame51j19.go
atsame51: add initial support for feather-m4-can
2021-04-16 17:49:46 +02:00
machine_atsame54p20.go
atsame54: add initial support for atsame54-xpro
2021-04-15 15:43:37 +02:00
machine_attiny85.go
avr: unify GPIO pin/port code
2020-05-22 13:17:04 +02:00
machine_avr.go
machine: move PinMode to central location
2021-05-06 13:59:12 +02:00
machine_esp32.go
esp32: remove extra configuration
2021-09-29 14:51:04 +02:00
machine_esp32c3.go
esp32c3: add support for this chip
2021-09-16 20:13:04 +02:00
machine_esp8266.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
machine_fe310.go
fe310: add support for bit banging drivers
2021-10-21 08:14:34 +02:00
machine_gameboyadvance.go
machine: move PinMode to central location
2021-05-06 13:59:12 +02:00
machine_generic.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
machine_k210.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
machine_mimxrt1062_uart.go
relax restriction on configuration with duplicate settings
2021-09-13 09:29:20 +02:00
machine_mimxrt1062.go
machine: move PinMode to central location
2021-05-06 13:59:12 +02:00
machine_nrf51.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
machine_nrf52.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
machine_nrf528xx.go
nrf: don't trigger a heap allocation in SPI.Transfer
2021-05-30 20:56:01 +02:00
machine_nrf52833.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
machine_nrf52840_usb_reset_bossa.go
nrf52840: add support for flashing with the BOSSA tool
2021-06-18 13:00:00 +02:00
machine_nrf52840_usb_reset_none.go
nrf52840: add support for flashing with the BOSSA tool
2021-06-18 13:00:00 +02:00
machine_nrf52840_usb_reset_uf2.go
machine/nrf52840+nxpmk66f18: rename files to match naming format for all other boards/machines
2021-02-26 00:32:33 +01:00
machine_nrf52840_usb.go
machine: make USBCDC global a pointer
2021-05-13 16:43:37 +02:00
machine_nrf52840.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
machine_nrf.go
machine: define Serial as the default output
2021-05-13 16:43:37 +02:00
machine_nxpmk66f18_uart.go
machine: make UART objects pointer receivers
2021-05-13 16:43:37 +02:00
machine_nxpmk66f18.go
machine: move PinMode to central location
2021-05-06 13:59:12 +02:00
machine_rp2040_adc.go
machine/rp2040: gpio and adc pin definitions
2021-06-09 12:27:05 +02:00
machine_rp2040_clocks.go
rp2040: add CPUFrequency()
2021-10-05 07:17:36 +02:00
machine_rp2040_gpio.go
machine/rp2040: add PWM implementation (#2015)
2021-09-01 16:58:13 +02:00
machine_rp2040_i2c.go
rp2040: i2c SetBaudRate spelling
2021-10-21 00:29:16 +02:00
machine_rp2040_pll.go
add rp2040, pico
2021-05-28 18:29:04 +02:00
machine_rp2040_pwm.go
machine/rp2040: add PWM implementation (#2015)
2021-09-01 16:58:13 +02:00
machine_rp2040_resets.go
add rp2040, pico
2021-05-28 18:29:04 +02:00
machine_rp2040_spi.go
machine/rp2040: add SPI support
2021-07-31 22:11:08 +02:00
machine_rp2040_timer.go
add rp2040, pico
2021-05-28 18:29:04 +02:00
machine_rp2040_uart.go
machine/rp2040: implement UART0/UART1, can be used on all rp2040 boards
2021-06-16 19:13:01 +02:00
machine_rp2040_watchdog.go
add rp2040, pico
2021-05-28 18:29:04 +02:00
machine_rp2040_xosc.go
add rp2040, pico
2021-05-28 18:29:04 +02:00
machine_rp2040.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
machine_stm32_exti_afio.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32_exti_exti.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32_exti_syscfg.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32_gpio_reva.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32_gpio_revb.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32_i2c_reva.go
machine: make machine.I2C0 and similar objects pointers
2021-03-29 02:02:04 +02:00
machine_stm32_i2c_revb.go
stm32: add nucleo-l031k6 support
2021-04-07 17:20:19 +02:00
machine_stm32_moder_gpio.go
stm32: add pwm for f4 series
2021-05-28 00:02:46 +02:00
machine_stm32_spi.go
stm32: support SPI on L4 series
2021-04-21 21:09:41 +02:00
machine_stm32_tim_moder.go
stm32f103 (bluepill): add pwm
2021-05-28 00:02:46 +02:00
machine_stm32_tim.go
stm32f103 (bluepill): add pwm
2021-05-28 00:02:46 +02:00
machine_stm32_uart.go
stm32: separate altfunc selection for UART Tx/Rx
2021-03-23 08:33:59 +01:00
machine_stm32.go
stm32: add support for PortMask* functions for WS2812 support
2021-09-16 18:29:14 +02:00
machine_stm32f4.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32f7.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32f7x2.go
stm32f7: add pwm
2021-05-28 00:02:46 +02:00
machine_stm32f103.go
bluepill: GPIO PinInputPullup / PinInputPulldown
2021-06-11 09:07:32 +02:00
machine_stm32f405.go
stm32: add pwm for f4 series
2021-05-28 00:02:46 +02:00
machine_stm32f407.go
stm32: add pwm for f4 series
2021-05-28 00:02:46 +02:00
machine_stm32l0.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32l0x1.go
stm32l0: add pwm
2021-05-28 00:02:46 +02:00
machine_stm32l0x2.go
stm32l0: add pwm
2021-05-28 00:02:46 +02:00
machine_stm32l4.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32l4x2.go
stm32l4: add pwm
2021-05-28 00:02:46 +02:00
machine_stm32l5.go
stm32: support pin input interrupts
2021-06-11 09:07:32 +02:00
machine_stm32l5x2.go
stm32l5: add pwm
2021-05-28 00:02:46 +02:00
machine.go
machine: move PinMode to central location
2021-05-06 13:59:12 +02:00
pwm.go
machine: refactor PWM support
2021-04-06 20:36:10 +02:00
serial-none.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
serial-uart.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
serial-usb.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
serial.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
spi.go
stm32: support SPI on L4 series
2021-04-21 21:09:41 +02:00
uart.go
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
usb.go
machine: make USBCDC global a pointer
2021-05-13 16:43:37 +02:00