tinygo/src/machine/machine_stm32f407.go

// +build stm32,stm32f407

package machine

// Peripheral abstraction layer for the stm32.

import (
	"device/arm"
	"device/stm32"
)

const CPU_FREQUENCY = 168000000

const (
	// Mode Flag
	GPIO_OUTPUT         = 0
	GPIO_INPUT          = GPIO_INPUT_PULLDOWN
	GPIO_INPUT_FLOATING = 1
	GPIO_INPUT_PULLDOWN = 2
	GPIO_INPUT_PULLUP   = 3

	// for UART
	GPIO_UART_TX = 4
	GPIO_UART_RX = 5

	//GPIOx_MODER
	GPIO_MODE_INPUT          = 0
	GPIO_MODE_GENERAL_OUTPUT = 1
	GPIO_MODE_ALTERNABTIVE   = 2
	GPIO_MODE_ANALOG         = 3

	//GPIOx_OTYPER
	GPIO_OUTPUT_MODE_PUSH_PULL  = 0
	GPIO_OUTPUT_MODE_OPEN_DRAIN = 1

	// GPIOx_OSPEEDR
	GPIO_SPEED_LOW     = 0
	GPIO_SPEED_MID     = 1
	GPIO_SPEED_HI      = 2
	GPIO_SPEED_VERY_HI = 3

	// GPIOx_PUPDR
	GPIO_FLOATING  = 0
	GPIO_PULL_UP   = 1
	GPIO_PULL_DOWN = 2
)

func (p GPIO) getPort() *stm32.GPIO_Type {
	switch p.Pin / 16 {
	case 0:
		return stm32.GPIOA
	case 1:
		return stm32.GPIOB
	case 2:
		return stm32.GPIOC
	case 3:
		return stm32.GPIOD
	case 4:
		return stm32.GPIOE
	case 5:
		return stm32.GPIOF
	case 6:
		return stm32.GPIOG
	case 7:
		return stm32.GPIOH
	case 8:
		return stm32.GPIOI
	default:
		panic("machine: unknown port")
	}
}

// enableClock enables the clock for this desired GPIO port.
func (p GPIO) enableClock() {
	switch p.Pin / 16 {
	case 0:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOAEN
	case 1:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOBEN
	case 2:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOCEN
	case 3:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIODEN
	case 4:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOEEN
	case 5:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOFEN
	case 6:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOGEN
	case 7:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOHEN
	case 8:
		stm32.RCC.AHB1ENR |= stm32.RCC_AHB1ENR_GPIOIEN
	default:
		panic("machine: unknown port")
	}
}

// Configure this pin with the given configuration.
func (p GPIO) Configure(config GPIOConfig) {
	// Configure the GPIO pin.
	p.enableClock()
	port := p.getPort()
	pin := p.Pin % 16
	pos := pin * 2

	if config.Mode == GPIO_INPUT_FLOATING {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
	} else if config.Mode == GPIO_INPUT_PULLDOWN {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_DOWN) << pos)))
	} else if config.Mode == GPIO_INPUT_PULLUP {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_INPUT) << pos)))
		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
	} else if config.Mode == GPIO_OUTPUT {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_GENERAL_OUTPUT) << pos)))
		port.OSPEEDR = stm32.RegValue((uint32(port.OSPEEDR)&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
	} else if config.Mode == GPIO_UART_TX {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
		port.OSPEEDR = stm32.RegValue((uint32(port.OSPEEDR)&^(0x3<<pos) | (uint32(GPIO_SPEED_HI) << pos)))
		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_PULL_UP) << pos)))
		p.setAltFunc(0x7)
	} else if config.Mode == GPIO_UART_RX {
		port.MODER = stm32.RegValue((uint32(port.MODER)&^(0x3<<pos) | (uint32(GPIO_MODE_ALTERNABTIVE) << pos)))
		port.PUPDR = stm32.RegValue((uint32(port.PUPDR)&^(0x3<<pos) | (uint32(GPIO_FLOATING) << pos)))
		p.setAltFunc(0x7)
	}
}

func (p GPIO) setAltFunc(af uint32) {
	port := p.getPort()
	pin := p.Pin % 16
	pos := pin * 4
	if pin >= 8 {
		port.AFRH = stm32.RegValue(uint32(port.AFRH)&^(0xF<<pos) | ((af & 0xF) << pos))
	} else {
		port.AFRL = stm32.RegValue(uint32(port.AFRL)&^(0xF<<pos) | ((af & 0xF) << pos))
	}
}

// Set the pin to high or low.
// Warning: only use this on an output pin!
func (p GPIO) Set(high bool) {
	port := p.getPort()
	pin := p.Pin % 16
	if high {
		port.BSRR = 1 << pin
	} else {
		port.BSRR = 1 << (pin + 16)
	}
}

// UART
type UART struct {
	Buffer *RingBuffer
}

var (
	// Both UART0 and UART1 refer to USART2.
	UART0 = UART{Buffer: NewRingBuffer()}
	UART1 = &UART0
)

// Configure the UART.
func (uart UART) Configure(config UARTConfig) {
	// Default baud rate to 115200.
	if config.BaudRate == 0 {
		config.BaudRate = 115200
	}

	// pins
	switch config.TX {
	default:
		// use standard TX/RX pins PA2 and PA3
		GPIO{UART_TX_PIN}.Configure(GPIOConfig{Mode: GPIO_UART_TX})
		GPIO{UART_RX_PIN}.Configure(GPIOConfig{Mode: GPIO_UART_RX})
	}

	// Enable USART2 clock
	stm32.RCC.APB1ENR |= stm32.RCC_APB1ENR_USART2EN

	/*
	  Set baud rate(115200)
	  OVER8 = 0, APB2 = 42mhz
	  +----------+--------+
	  | baudrate | BRR    |
	  +----------+--------+
	  | 1200     | 0x88B8 |
	  | 2400     | 0x445C |
	  | 9600     | 0x1117 |
	  | 19200    | 0x88C  |
	  | 38400    | 0x446  |
	  | 57600    | 0x2D9  |
	  | 115200   | 0x16D  |
	  +----------+--------+
	*/
	stm32.USART2.BRR = 0x16c

	// Enable USART2 port.
	stm32.USART2.CR1 = stm32.USART_CR1_TE | stm32.USART_CR1_RE | stm32.USART_CR1_RXNEIE | stm32.USART_CR1_UE

	// Enable RX IRQ.
	arm.SetPriority(stm32.IRQ_USART2, 0xc0)
	arm.EnableIRQ(stm32.IRQ_USART2)
}

// WriteByte writes a byte of data to the UART.
func (uart UART) WriteByte(c byte) error {
	stm32.USART2.DR = stm32.RegValue(c)

	for (stm32.USART2.SR & stm32.USART_SR_TXE) == 0 {
	}
	return nil
}

//go:export USART2_IRQHandler
func handleUSART2() {
	UART1.Receive(byte((stm32.USART2.DR & 0xFF)))
}