tinygo-org/tinygo
1
0
Fork 0
mirror of https://github.com/tinygo-org/tinygo.git synced 2026-09-01 02:09:06 +00:00
Code Issues Packages Projects Releases 6 Wiki Activity
Files
6b53c58f92cb693432fa6aad47dc4df2ad936d3d
tinygo/targets
T
History
deadprogram 6b53c58f92 esp32c6: fix .rodata flash mapping being off by a few bytes 
The flash MMU maps 64kB pages, so a flash-mapped section is only read
correctly when its virtual address and its offset within the firmware
image agree modulo 64kB. targets/esp32c6.ld reproduces the image offset
in .rodata_dummy by accumulating the preceding segment sizes and headers,
which works only if the linker inserts no alignment padding between the
dummy and .rodata -- padding moves the virtual address without moving the
image offset.

lld gives .rodata 8-byte alignment, but the accumulated offset is only
4-byte aligned, so whenever the preceding segments happened to leave the
running offset at a 4-mod-8 boundary the whole of .rodata was mapped 4
bytes off. Every read of constant data then returned neighbouring bytes.

This is silent and looks like arbitrary memory corruption rather than a
mapping bug. It was found while bringing up WiFi: the blob rejected its
init config because the first field of a const struct read back as a code
pointer, and whether a given build was affected depended on unrelated code
size changes.

Pad .data, .iram and .text to a multiple of 8 so the running image offset
stays 8-aligned and matches, and add ASSERTs for both flash-mapped
sections so this cannot regress silently.

Signed-off-by: Ron Evans <ron@hybridgroup.com>
2026-08-30 10:36:44 +02:00
..
adafruit-esp32-feather-v2.json
Begin implementing support for Adafruit ESP32 Feather V2
2024-03-27 11:55:25 +01:00
ae-rp2040.json
board: add AKIZUKI DENSHI AE-RP2040
2023-08-04 17:53:01 +02:00
amken-trio.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
arduino-leonardo.json
Add basic atmega32u support (#3337)
2022-12-20 16:57:55 +01:00
arduino-mega1280.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-mega2560.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-mkr1000.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
arduino-mkrwifi1010.json
targets: add ninafw tag to Arduino mkrwifi1010 and Adafruit Matrix Portal M4 for drivers netlink support
2024-01-15 19:34:05 -05:00
arduino-nano33.json
Adding additional build tag for boards with ninafw
2024-01-07 16:06:16 +01:00
arduino-nano-new.json
Add Arduino Nano w/ New Bootloader target
2021-05-01 17:09:46 +02:00
arduino-nano.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-uno-q.json
targets: add "adb" flash method using Android Debug Bridge
2026-04-11 17:19:46 +01:00
arduino-uno.json
targets: rename arduino target to arduino-uno
2026-04-18 23:58:39 +01:00
arduino-zero.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
arduino.json
targets: rename arduino target to arduino-uno
2026-04-18 23:58:39 +01:00
arm.ld
rp2040: add multicore support
2025-06-13 16:19:10 +02:00
atmega32u4.json
Add basic atmega32u support (#3337)
2022-12-20 16:57:55 +01:00
atmega328p.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega328pb.json
machine/atmega328pb: refactor to enable extra uart
2023-12-02 13:26:59 +01:00
atmega1280.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega1284p.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega2560.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atsamd21.ld
machine/atsamd21: extracts functionality for processor family into shared files.
2019-02-20 14:16:09 +01:00
atsamd21e18a.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
atsamd21g18a.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
atsamd51.ld
machine/atsamd51: add support for ATSAMD51 processor using Adafruit ItsyBitsy-M4 board
2019-09-14 17:56:14 +02:00
atsamd51g19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j20a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j20a.ld
sam: fix ROM / RAM size on atsamd51j20
2020-05-07 23:04:10 +02:00
atsamd51p19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51p20a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51p20a.ld
Add board support for Adafruit Grand Central M4 (SAMD51) (#1714)
2021-03-15 14:06:09 +01:00
atsame5xx19.ld
atsame51: add initial support for feather-m4-can
2021-04-16 17:49:46 +02:00
atsame5xx20-no-bootloader.ld
atsame54: add initial support for atsame54-xpro
2021-04-15 15:43:37 +02:00
atsame51j19a.json
atsame51: add initial support for feather-m4-can
2021-04-16 17:49:46 +02:00
atsame54-xpro.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
atsame54p20a.json
atsame5x: add support for CAN
2021-05-10 12:27:10 +02:00
attiny85.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
attiny1616.json
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avr.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
avr.ld
avr: support ThinLTO
2022-11-18 18:40:38 +01:00
avr.S
avr: fix .data initialization for binaries over 64kB
2022-11-14 22:22:26 +01:00
avrtiny.json
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avrtiny.ld
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avrtiny.S
all: remove LLVM 14 support
2023-10-01 18:32:15 +02:00
badger2040-w.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
badger2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
badger2350.json
New Boards: Pimoroni Blinky 2350 and Badger 2350 (#5434)
2026-06-13 15:00:29 +02:00
blinky2350.json
New Boards: Pimoroni Blinky 2350 and Badger 2350 (#5434)
2026-06-13 15:00:29 +02:00
bluemicro840.json
Add bluemicro840 board
2023-06-01 21:04:36 +02:00
bluepill-clone.json
Add support for additional openocd commands (#1492)
2020-12-30 09:19:41 +01:00
bluepill.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
btt-skr-pico.json
machine: Add board support for BigTreeTech SKR Pico (#4842)
2025-06-01 18:15:57 +02:00
challenger-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
circuitplay-bluefruit.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
circuitplay-express.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
clue-alpha.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
clue.json
machine/clue: correct volume name and add alias for release version of Adafruit Clue board
2020-12-29 15:17:38 +01:00
cortex-m0.json
all: update to LLVM 14
2022-04-23 08:45:46 +02:00
cortex-m0plus.json
all: update to LLVM 14
2022-04-23 08:45:46 +02:00
cortex-m3.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m4.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m7.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m33.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m-qemu.json
targets: bump cortex-m-qemu default stack size
2023-03-08 09:38:49 -08:00
cortex-m-qemu.s
builder: sizes: list interrupt vector as a pseudo-package for -size=full
2023-03-08 07:09:46 +01:00
cortex-m.json
cortexm: add "gdb" as a debugger
2023-04-26 23:07:52 +02:00
d1mini.json
esp8266: add target for d1mini board and add pin mappings for SPI/I2C to help out implementers
2020-10-17 19:57:53 +02:00
digispark.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
elecrow-rp2040.json
add comboat_fw tag for elecrow W5 boards with Combo-AT Wifi firmware
2025-02-21 07:22:17 +01:00
elecrow-rp2350.json
add comboat_fw tag for elecrow W5 boards with Combo-AT Wifi firmware
2025-02-21 07:22:17 +01:00
embedfire-py32f002b.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
embedfire-py32f030.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
esp32-c3-devkit-rust-1.json
Support for the Espressif ESP32-C3-DevKit-RUST-1 development board
2023-01-29 22:50:12 +01:00
esp32-coreboard-v2.json
machine/esp32, targets/esp32: correct board definitions for actual boards not processor variants, also define all labeled pins
2020-10-14 21:48:48 +02:00
esp32-generic.json
create generic targets for esp32 boards
2026-04-15 10:28:33 +01:00
esp32-interrupts.S
esp32: implement flash XIP (execute-in-place) support
2026-07-22 23:52:21 +02:00
esp32-mini32.json
machine/esp32, targets/esp32: correct board definitions for actual boards not processor variants, also define all labeled pins
2020-10-14 21:48:48 +02:00
esp32-qemu.json
test: run ESP32 programs in QEMU
2026-08-20 16:07:13 +02:00
esp32.json
test: run ESP32 programs in QEMU
2026-08-20 16:07:13 +02:00
esp32.ld
targets/esp32: add .rxring and .wifibss sections to DRAM1
2026-07-25 17:42:01 +02:00
esp32c3-12f.json
targets: fix build tag duplicates
2022-09-03 08:31:27 +02:00
esp32c3-generic.json
create generic targets for esp32 boards
2026-04-15 10:28:33 +01:00
esp32c3-supermini.json
targets: esp32c3-supermini (#4518)
2025-01-20 21:44:58 +01:00
esp32c3.json
targets/esp32*: add espradio tag for convenience
2026-07-30 02:03:13 +02:00
esp32c3.ld
targets/esp32c3: add remaining required BT ROM functions to linker
2026-07-28 12:11:11 +02:00
esp32c6.json
esp32c6: prepare target for espradio WiFi support
2026-08-29 19:30:41 +02:00
esp32c6.ld
esp32c6: fix .rodata flash mapping being off by a few bytes
2026-08-30 10:36:44 +02:00
esp32s3-box-3.json
Add new targets/esp32s3-box-3 (#5388)
2026-05-28 22:47:08 +02:00
esp32s3-generic.json
create generic targets for esp32 boards
2026-04-15 10:28:33 +01:00
esp32s3-interrupts.S
esp32s3: fix register-window corruption under interrupt load
2026-08-23 21:29:21 +02:00
esp32s3-supermini.json
targets: add esp32s3-supermini
2026-04-05 14:15:40 +02:00
esp32s3.json
test: run ESP32 programs in QEMU
2026-08-20 16:07:13 +02:00
esp32s3.ld
esp32s3: fix register-window corruption under interrupt load
2026-08-23 21:29:21 +02:00
esp8266.json
feat: add inheritable-only field to filter processor-level targets (#5270)
2026-04-05 14:15:40 +02:00
esp8266.ld
esp8266: add support for this chip
2020-09-09 19:17:11 +02:00
esp-c3-32s-kit.json
targets: add WaveShare ESP-C3-32S-Kit
2024-10-22 11:21:48 +01:00
fe310.json
all: fix LLVM version compatibility for targets and interp
2026-07-17 19:06:57 +02:00
feather-m0-express.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m4-can.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-nrf52840-sense.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-nrf52840.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-rp2040-boot-stage2.S
feather-rp2040,macropad-rp2040: fix qspi-flash settings
2022-07-05 16:37:45 +02:00
feather-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
feather-stm32f405.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
gameboy-advance.json
compiler: implement recover() built-in function
2022-06-16 07:59:21 +02:00
gameboy-advance.ld
main: add initial support for (in-development) LLVM 11
2020-10-13 20:23:50 +02:00
gameboy-advance.s
fix GBA ROM header
2021-09-05 19:59:26 +02:00
gemma-m0.json
Board support for Adafruit Gemma M0 (#3903)
2023-09-11 11:11:26 +02:00
gnse.json
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
gobadge.json
targets: add GoBadge target as alias for PyBadge :)
2023-09-10 15:52:55 +02:00
gopher-arcade.json
Added Gopher ARCADE board
2025-09-20 08:35:34 +02:00
gopher-badge.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
gopherbot2.json
target: add gopherbot and gopherbot2 aliases to simplify for newer users
2022-07-26 08:06:24 +02:00
gopherbot.json
target: add gopherbot and gopherbot2 aliases to simplify for newer users
2022-07-26 08:06:24 +02:00
grandcentral-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
hifive1b.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
hifive1b.ld
all: add HiFive1 rev B board with RISC-V architecture
2019-07-07 14:03:24 +02:00
hw-651-s110v8.json
board: support for NRF51 HW-651 (#4712)
2025-01-30 05:46:52 +01:00
hw-651.json
board: support for NRF51 HW-651 (#4712)
2025-01-30 05:46:52 +01:00
itsybitsy-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
itsybitsy-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
itsybitsy-nrf52840.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
k210.json
all: fix LLVM version compatibility for targets and interp
2026-07-17 19:06:57 +02:00
kb2040.json
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
lgt92.json
Target MCU was not properly defined for LGT92 target
2023-01-25 14:11:28 +01:00
lm3s6965.ld
all: add emulation support for Cortex-M3 with QEMU
2018-10-08 17:07:19 +02:00
lorae5.json
stm32: add minimal stm32wlex5 / lorae5 target
2021-11-20 12:07:11 +01:00
m5paper.json
targets: add support for m5paper
2024-05-12 16:09:27 +02:00
m5stack-core2.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
m5stack.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
m5stamp-c3.json
m5stamp-c3: change settings to explicitly use UART
2023-11-29 08:11:46 +01:00
m5stamp-s3a.json
targets: add M5Stack Stamp-S3A (#5524)
2026-07-16 14:31:47 +02:00
m5stick-c.json
Support for the M5STACK M5StickC ESP32-PICO device
2023-06-08 09:27:41 +02:00
macropad-rp2040-boot-stage2.S
feather-rp2040,macropad-rp2040: fix qspi-flash settings
2022-07-05 16:37:45 +02:00
macropad-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
maixbit.json
Revert "fix: flash-command for maixbit board"
2022-04-12 17:13:32 +02:00
maixbit.ld
all: remove support for LLVM 9
2021-03-04 15:46:05 +01:00
makerfabs-esp32c3spi35.json
Support for Makerfabs ESP32C3SPI35 TFT Touchscreen board
2023-01-26 20:16:11 +01:00
matrixportal-m4.json
targets: add ninafw tag to Arduino mkrwifi1010 and Adafruit Matrix Portal M4 for drivers netlink support
2024-01-15 19:34:05 -05:00
mch2022.json
boards: Add MCH2022 badge
2022-07-16 08:31:22 +02:00
mdbt50qrx-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
metro-m4-airlift.json
targets: add ninafw pins and settings to Adafruit Metro M4 Airlift board
2024-01-15 19:34:05 -05:00
metro-rp2350.json
feat: add metro-rp2350 board definition (#4989)
2025-08-10 09:32:16 +02:00
microbit-s110v8.json
microbit: reelboard: flash using OpenOCD when needed
2020-09-15 17:07:40 +02:00
microbit-v2-s113v7.json
fix: use OpenOCD flash method on microbit v2 when using Nordic Semi SoftDevice
2025-04-26 15:39:39 +00:00
microbit-v2-s140v7.json
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
microbit-v2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
microbit.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
mimxrt1062-teensy40.ld
teensy40: enable hardware UART reconfiguration, fix receive watermark interrupt
2021-09-13 09:29:20 +02:00
mksnanov3.json
mksnanov3: limit programming speed to 1800 kHz
2024-04-27 13:02:20 +02:00
nano-33-ble-s140v6-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nano-33-ble-s140v7-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nano-33-ble-s140v7.json
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nano-33-ble.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
nano-33-ble.ld
board/nano-33-ble: pins, blinking leds and serial
2021-06-14 00:06:59 +02:00
nano-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
nicenano.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nintendoswitch.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
nintendoswitch.ld
nintendoswitch: Add env parser and removed unused stuff
2020-11-03 23:28:55 +01:00
nintendoswitch.s
nintendoswitch: Add env parser and removed unused stuff
2020-11-03 23:28:55 +01:00
nodemcu.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
nrf51-s110v8.json
nrf: add microbit-s110v8 target
2020-05-26 18:50:33 +02:00
nrf51-s110v8.ld
nrf: add microbit-s110v8 target
2020-05-26 18:50:33 +02:00
nrf51.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf51.ld
nrf: add micro:bit board
2018-10-06 13:04:14 +02:00
nrf52-s132v6.json
nrf: fix nrf52-s132v6 config
2019-11-16 21:57:18 +01:00
nrf52-s132v6.ld
nrf: fix nrf52832 flash size
2020-10-20 19:13:43 +02:00
nrf52.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52.ld
nrf: fix nrf52832 flash size
2020-10-20 19:13:43 +02:00
nrf52833-s113v7.json
microbit-v2: add support for S113 SoftDevice
2021-04-14 22:55:52 +02:00
nrf52833-s113v7.ld
microbit-v2: add support for S113 SoftDevice
2021-04-14 22:55:52 +02:00
nrf52833-s140v7.json
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
nrf52833-s140v7.ld
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
nrf52833.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52833.ld
machine/microbit-v2: add initial support based on work done by @alankrantas thank you!
2021-01-06 18:50:46 +01:00
nrf52840-mdk-usb-dongle.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nrf52840-mdk.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
nrf52840-s140v6-uf2-generic.json
nrf52840: generic board support (#4121)
2024-02-12 10:37:19 +01:00
nrf52840-s140v6-uf2.json
nrf52: cleanup s140v6 uf2 targets
2022-08-07 11:27:49 +02:00
nrf52840-s140v6-uf2.ld
nrf52: cleanup s140v6 uf2 targets
2022-08-07 11:27:49 +02:00
nrf52840-s140v7-uf2.json
nrf52: cleanup s140v7 uf2 targets
2022-08-07 12:58:36 +02:00
nrf52840-s140v7-uf2.ld
nrf52: cleanup s140v7 uf2 targets
2022-08-07 12:58:36 +02:00
nrf52840-s140v7.json
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nrf52840-s140v7.ld
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nrf52840.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52840.ld
nrf: add nrf52840-mdk board
2018-10-18 15:07:06 +02:00
nucleo-f103rb.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-f722ze.json
targets/nucleo-f722ze.json: add build-tag stm32f722, change stm32f7x2.s to ..722.s
2026-04-05 14:15:40 +02:00
nucleo-g0b1re.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
nucleo-h753zi.json
feat(machine/stm32): add STM32H7 and NUCLEO-H753ZI support
2026-07-23 12:29:44 +02:00
nucleo-l031k6.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-l432kc.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-l476rg.json
add stm32 nucleol476rg support
2024-04-19 20:50:00 +02:00
nucleo-l552ze.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-wl55jc.json
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
nxpmk66f18.ld
Cleanup Teensy 3.6 linker script
2020-07-13 12:35:53 +02:00
p1am-100.json
p1am-100: remove duplicate build tags
2022-08-29 09:44:03 +02:00
particle-3rd-gen.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
particle-argon.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
particle-boron.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
particle-xenon.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
pca10031.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10040-s132v6.json
nrf: fix nrf52-s132v6 config
2019-11-16 21:57:18 +01:00
pca10040.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10056-s140v6-uf2.json
adding new uf2 target for PCA10056 (#3765)
2023-08-19 11:06:17 +02:00
pca10056-s140v7.json
nrf: support for SoftDevice s140 PCA10056 board
2019-11-20 16:43:55 +01:00
pca10056.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
pca10059-s140v7.json
Add pca10059-s140v7 as a target
2024-03-23 10:23:07 +01:00
pca10059.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10059.ld
initial support for pca10059
2021-03-28 21:38:05 +02:00
pga2350.json
machine/rp2350: add flash support for rp2350 (#4803)
2025-03-16 09:45:53 +01:00
pico2-ice.json
Create "pico2-ice" target board (#5062)
2025-10-13 13:19:04 +02:00
pico2-w.json
targets: add target for pico2-w board
2025-02-28 20:02:35 +01:00
pico2.json
machine/rp2350: add flash support for rp2350 (#4803)
2025-03-16 09:45:53 +01:00
pico-boot-stage2.S
rp2040: support Adafruit Feather RP2040
2021-06-19 12:34:40 +02:00
pico-plus2.json
target: add Pimoroni Pico Plus2 (#4735)
2025-02-21 09:56:52 +01:00
pico-w.json
targets: add cyw43439 tag to badger2040-w and also add new pico-w target for wireless support
2024-06-11 07:57:58 +02:00
pico.json
Bump default stack size for target pico to 8kb from 2kb
2023-11-12 19:22:50 +01:00
pinetime.json
pinetime: update the target file
2023-05-09 19:44:00 +02:00
py32-m4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xc.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xc.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xd.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xd.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xe.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xe.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32e407xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f001cx4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f001cx4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f001cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f001xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002ax5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002ax5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002axx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002bx5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002bx5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002bxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002cx5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002cx5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx2.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx2.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xx5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002xxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002zx4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002zx4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f002zxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x7.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x7.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f003xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f021x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f021x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f021xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x7.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x7.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f030xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x4.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x4.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x7.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x7.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f031xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f032x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f032x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f032xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cx9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cxb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cxb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040epxb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040epxb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040epxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040ex9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040exb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040exb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040exx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040x9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f040xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cx9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cxb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cxb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071ex9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071exb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071exb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071exx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071x9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f071xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cx9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cxb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cxb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072ex9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072exb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072exb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072exx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x9.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072x9.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f072xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xc.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xc.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xd.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xd.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f403xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f410xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f410xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32f410xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l020x5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l020x5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l020xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l090xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l090xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l090xc.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l090xc.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32l090xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m010x5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m010x5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m010xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m020x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m020x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m020xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m030x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m030x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m030xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m031x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m031x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m031xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070cxb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070cxb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070cxx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32m070xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md310x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md310x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md310xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md320x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md320x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md320xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md410x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md410x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md410xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md420x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md420x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md420xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md430x8.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md430x8.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32md430xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020bx5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020bx5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020bx6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020bx6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020x5.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020x5.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020x6.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020x6.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t020xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t090xb.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t090xb.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t090xc.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t090xc.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t090xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t092xc.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t092xc.ld
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
py32t092xx.json
Puya PY32F MCU support (#5106)
2026-08-29 08:41:43 +02:00
pybadge.json
targets: add ninafw pins and settings to Adafruit PyBadge board with AirLift Featherwing
2024-01-15 19:34:05 -05:00
pygamer.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
pyportal.json
Adding additional build tag for boards with ninafw
2024-01-07 16:06:16 +01:00
qtpy-esp32c3.json
targets: add Adafruit qtpy-esp32c3 board support
2023-11-28 23:57:30 +01:00
qtpy-rp2040-boot-stage2.S
Add qtpy-rp2040 to TinyGo v0.25.0
2022-09-02 15:06:37 +02:00
qtpy-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
qtpy.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
rak4631.json
add board: RAKwireless RAK4631 (#4454)
2024-09-05 11:49:36 +02:00
reelboard-s140v7.json
microbit: reelboard: flash using OpenOCD when needed
2020-09-15 17:07:40 +02:00
reelboard.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
riscv32.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
riscv64.json
all: switch to LLVM 16
2023-09-18 21:58:02 +02:00
riscv-qemu.json
all: fix LLVM version compatibility for targets and interp
2026-07-17 19:06:57 +02:00
riscv-qemu.ld
ci: add more tests for wasm and baremetal
2025-03-10 03:26:30 -07:00
riscv.json
compiler: implement recover() built-in function
2022-06-16 07:59:21 +02:00
riscv.ld
all: add support for multicore scheduler
2025-06-12 21:04:36 +02:00
rp2040-boot-stage2.S
rp2040: add missing suffix to CMD_READ_STATUS
2023-07-03 10:52:33 +02:00
rp2040.json
feat: add inheritable-only field to filter processor-level targets (#5270)
2026-04-05 14:15:40 +02:00
rp2040.ld
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
rp2350_embedded_block.s
Add RP2350 support (#4459)
2024-12-18 19:36:30 +01:00
rp2350.json
feat: add inheritable-only field to filter processor-level targets (#5270)
2026-04-05 14:15:40 +02:00
rp2350.ld
make spellfix (+ manual tweak)
2026-04-17 10:33:07 +02:00
rp2350b.json
feat: add inheritable-only field to filter processor-level targets (#5270)
2026-04-05 14:15:40 +02:00
simavr.json
avr: get go test -target=simavr to work
2022-05-18 15:20:09 +02:00
stm32.ld
stm32: initial support
2018-09-22 01:51:44 +02:00
stm32f4disco-1.json
machine/stm32f4disco: add updated target file for newer version of board that have updated st-link
2020-06-30 14:08:20 +02:00
stm32f4disco.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32f7x2zetx.ld
Nucleo f722ze (#1526)
2020-12-15 06:51:35 +01:00
stm32f103rb.ld
machine/stm32f103xx/nucleo-f103rb: add support for NUCLEO-F103RB STM32F1-based board
2019-09-17 13:26:26 +02:00
stm32f405.ld
add STM32F405 machine/runtime, and new board/target feather-stm32f405
2020-09-11 09:09:02 +02:00
stm32f407.ld
stm32: add support for the STM32F4Discovery
2019-04-13 13:32:05 +02:00
stm32f469.ld
targets,runtime,machine: add support for the stm32f469-disco board
2021-12-31 10:30:48 +00:00
stm32f469disco.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32g0b1.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32g0b1.ld
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32g0b1cb.ld
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32h7.ld
feat(machine/stm32): add STM32H7 and NUCLEO-H753ZI support
2026-07-23 12:29:44 +02:00
stm32l0x1.json
cli: add basic probe-rs support
2026-05-28 18:05:24 +02:00
stm32l0x2.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32l4x2.ld
Add support for nucleol432 board
2021-03-23 08:33:59 +01:00
stm32l4x5.ld
stm32: add blues wireless swan
2022-01-13 07:56:08 +01:00
stm32l4x6.ld
add stm32 nucleol476rg support
2024-04-19 20:50:00 +02:00
stm32l5x2xe.ld
nucleol552ze: implementation with CLOCK, LED, and UART
2021-02-16 12:48:52 +01:00
stm32l031k6.ld
stm32: add nucleo-l031k6 support
2021-04-07 17:20:19 +02:00
stm32l031x6.ld
stm32: add support for the STM32L031G6U6
2025-07-17 16:35:05 +02:00
stm32l072czt6.ld
Support for STM32L0 MCUs and Dragino LGT92 device (#1561)
2021-01-08 22:27:25 +01:00
stm32u031.json
machine: add support for the STM32U031 chip
2026-07-08 08:54:06 +02:00
stm32u031x8.ld
machine: add support for the STM32U031 chip
2026-07-08 08:54:06 +02:00
stm32u585.json
machine/stm32: add STM32U585 target definition and runtime
2026-04-05 14:15:40 +02:00
stm32u585.ld
machine/stm32: add STM32U585 target definition and runtime
2026-04-05 14:15:40 +02:00
stm32wl5x_cm4.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32wle5.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32wlx.ld
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
swan.json
targets/swan: rename group build tag stm32l4x5 => stm32l4y5 to avoid clash with stm32 device name
2026-04-05 14:15:40 +02:00
teensy36.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
teensy36.s
Viable NXP/Teensy support
2020-07-08 21:58:15 +02:00
teensy40.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
teensy40.s
teensy40: initial implementation
2020-11-11 18:34:47 +01:00
teensy41.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
thingplus-rp2040.json
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
thumby.json
targets: add support for Thumby
2024-02-23 14:00:57 +01:00
tiny2350.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
tkey.json
all: fix LLVM version compatibility for targets and interp
2026-07-17 19:06:57 +02:00
tkey.ld
targets: add implementation for Tillitis TKey device (#4631)
2024-12-14 14:26:03 +01:00
trinket-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
trinkey-qt2040-boot-stage2.S
machine: Add support for Adafruit QT2040 board.
2022-08-28 10:16:52 +02:00
trinkey-qt2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
tufty2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
uefi-amd64.json
UEFI: add support for tasks scheduler and make it default (#5553)
2026-08-28 19:48:48 +02:00
vicharak_shrike-lite.json
targets: Add Shrike Lite board (#5170)
2026-04-05 14:15:39 +02:00
wasi.json
targets: add wasi.json that inherits wasip1.json
2024-03-27 16:01:40 +01:00
wasip1.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasip2.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasm_exec_node.js
wasm: patch wasm_exec.js and wasm_exec_node.js from Go 1.18+ (#5483)
2026-07-08 12:32:00 +02:00
wasm_exec.js
targets:wasm_exec.js set _pendingEvent to null
2026-08-27 20:32:13 +02:00
wasm-undefined.txt
wasm: do not allow undefined symbols
2022-09-08 08:25:27 +02:00
wasm-unknown.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasm.json
wasm: patch wasm_exec.js and wasm_exec_node.js from Go 1.18+ (#5483)
2026-07-08 12:32:00 +02:00
waveshare-rp2040-tiny.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
waveshare-rp2040-zero.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
wioterminal.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
x9pro.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
xiao-ble-plus.json
Adding support for the 'Plus' board variant of SeeedStudio XIAO nrf52840, works with Sense variants as well (#5479)
2026-07-07 13:36:18 +02:00
xiao-ble.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
xiao-esp32c3.json
boards: Add XIAO ESP32C3 board
2022-08-26 12:44:04 +02:00
xiao-esp32c6.json
machine,targets: add minimal esp32c6 implementation
2026-06-25 19:30:24 +02:00
xiao-esp32s3.json
target: add xiao-esp32s3 board target
2025-11-24 14:30:50 +00:00
xiao-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
xiao-rp2350.json
targets: add support for Seeedstudio Xiao-RP2350 board.
2026-04-05 14:15:40 +02:00
xiao.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
xtensa.json
Also disable asynchronous unwind tables
2022-04-11 14:58:55 +02:00