tinygo-org/tinygo
1
0
Fork 0
mirror of https://github.com/tinygo-org/tinygo.git synced 2026-08-03 02:27:48 +00:00
Code Issues Packages Projects Releases 6 Wiki Activity
Files
4a6a82ae7904c8685e4473934255bae7c19adee3
tinygo/targets
T
History
deadprogram 394116e998 targets: switch rp2040/rp2350 to default to tasks scheduler 
This switches the rp2040 and rp2350 to use the tasks scheduler
by default instead of using the cores scheduler. Too many race
conditions at present, we need to look into exactly why. In
the meantime, going back to the tasks as default will address
a lot of these intermittent problems.

Signed-off-by: deadprogram <ron@hybridgroup.com>
2026-04-05 14:15:40 +02:00
..
adafruit-esp32-feather-v2.json
Begin implementing support for Adafruit ESP32 Feather V2
2024-03-27 11:55:25 +01:00
ae-rp2040.json
board: add AKIZUKI DENSHI AE-RP2040
2023-08-04 17:53:01 +02:00
amken-trio.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
arduino-leonardo.json
Add basic atmega32u support (#3337)
2022-12-20 16:57:55 +01:00
arduino-mega1280.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-mega2560.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-mkr1000.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
arduino-mkrwifi1010.json
targets: add ninafw tag to Arduino mkrwifi1010 and Adafruit Matrix Portal M4 for drivers netlink support
2024-01-15 19:34:05 -05:00
arduino-nano33.json
Adding additional build tag for boards with ninafw
2024-01-07 16:06:16 +01:00
arduino-nano-new.json
Add Arduino Nano w/ New Bootloader target
2021-05-01 17:09:46 +02:00
arduino-nano.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arduino-zero.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
arduino.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
arm.ld
rp2040: add multicore support
2025-06-13 16:19:10 +02:00
atmega32u4.json
Add basic atmega32u support (#3337)
2022-12-20 16:57:55 +01:00
atmega328p.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega328pb.json
machine/atmega328pb: refactor to enable extra uart
2023-12-02 13:26:59 +01:00
atmega1280.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega1284p.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atmega2560.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
atsamd21.ld
machine/atsamd21: extracts functionality for processor family into shared files.
2019-02-20 14:16:09 +01:00
atsamd21e18a.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
atsamd21g18a.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
atsamd51.ld
machine/atsamd51: add support for ATSAMD51 processor using Adafruit ItsyBitsy-M4 board
2019-09-14 17:56:14 +02:00
atsamd51g19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j20a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51j20a.ld
sam: fix ROM / RAM size on atsamd51j20
2020-05-07 23:04:10 +02:00
atsamd51p19a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51p20a.json
all: use -Qunused-arguments only for assembly files
2021-04-14 09:17:54 +02:00
atsamd51p20a.ld
Add board support for Adafruit Grand Central M4 (SAMD51) (#1714)
2021-03-15 14:06:09 +01:00
atsame5xx19.ld
atsame51: add initial support for feather-m4-can
2021-04-16 17:49:46 +02:00
atsame5xx20-no-bootloader.ld
atsame54: add initial support for atsame54-xpro
2021-04-15 15:43:37 +02:00
atsame51j19a.json
atsame51: add initial support for feather-m4-can
2021-04-16 17:49:46 +02:00
atsame54-xpro.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
atsame54p20a.json
atsame5x: add support for CAN
2021-05-10 12:27:10 +02:00
attiny85.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
attiny1616.json
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avr.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
avr.ld
avr: support ThinLTO
2022-11-18 18:40:38 +01:00
avr.S
avr: fix .data initialization for binaries over 64kB
2022-11-14 22:22:26 +01:00
avrtiny.json
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avrtiny.ld
avr: add attiny1616 support
2023-05-20 21:18:02 +02:00
avrtiny.S
all: remove LLVM 14 support
2023-10-01 18:32:15 +02:00
badger2040-w.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
badger2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
bluemicro840.json
Add bluemicro840 board
2023-06-01 21:04:36 +02:00
bluepill-clone.json
Add support for additional openocd commands (#1492)
2020-12-30 09:19:41 +01:00
bluepill.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
btt-skr-pico.json
machine: Add board support for BigTreeTech SKR Pico (#4842)
2025-06-01 18:15:57 +02:00
challenger-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
circuitplay-bluefruit.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
circuitplay-express.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
clue-alpha.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
clue.json
machine/clue: correct volume name and add alias for release version of Adafruit Clue board
2020-12-29 15:17:38 +01:00
cortex-m0.json
all: update to LLVM 14
2022-04-23 08:45:46 +02:00
cortex-m0plus.json
all: update to LLVM 14
2022-04-23 08:45:46 +02:00
cortex-m3.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m4.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m7.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m33.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
cortex-m-qemu.json
targets: bump cortex-m-qemu default stack size
2023-03-08 09:38:49 -08:00
cortex-m-qemu.s
builder: sizes: list interrupt vector as a pseudo-package for -size=full
2023-03-08 07:09:46 +01:00
cortex-m.json
cortexm: add "gdb" as a debugger
2023-04-26 23:07:52 +02:00
d1mini.json
esp8266: add target for d1mini board and add pin mappings for SPI/I2C to help out implementers
2020-10-17 19:57:53 +02:00
digispark.json
avr: drop GNU toolchain dependency
2022-11-06 09:05:05 +01:00
elecrow-rp2040.json
add comboat_fw tag for elecrow W5 boards with Combo-AT Wifi firmware
2025-02-21 07:22:17 +01:00
elecrow-rp2350.json
add comboat_fw tag for elecrow W5 boards with Combo-AT Wifi firmware
2025-02-21 07:22:17 +01:00
esp32-c3-devkit-rust-1.json
Support for the Espressif ESP32-C3-DevKit-RUST-1 development board
2023-01-29 22:50:12 +01:00
esp32-coreboard-v2.json
machine/esp32, targets/esp32: correct board definitions for actual boards not processor variants, also define all labeled pins
2020-10-14 21:48:48 +02:00
esp32-mini32.json
machine/esp32, targets/esp32: correct board definitions for actual boards not processor variants, also define all labeled pins
2020-10-14 21:48:48 +02:00
esp32.json
targets: modify esp32, esp32s3, esp32c3, & esp8266 targets to use built-in esp32flash
2026-04-05 14:15:40 +02:00
esp32.ld
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
esp32c3-12f.json
targets: fix build tag duplicates
2022-09-03 08:31:27 +02:00
esp32c3-supermini.json
targets: esp32c3-supermini (#4518)
2025-01-20 21:44:58 +01:00
esp32c3.json
targets: modify esp32, esp32s3, esp32c3, & esp8266 targets to use built-in esp32flash
2026-04-05 14:15:40 +02:00
esp32c3.ld
esp32c3: update linker script to support binary blobs
2024-01-27 14:11:09 +01:00
esp32s3-wroom1.json
Esp32s3 implement spi (#5169)
2026-04-05 14:15:40 +02:00
esp32s3.json
targets: modify esp32, esp32s3, esp32c3, & esp8266 targets to use built-in esp32flash
2026-04-05 14:15:40 +02:00
esp32s3.ld
Add ESP32-S3 support (#5091)
2025-11-24 12:11:47 +01:00
esp8266.json
targets: modify esp32, esp32s3, esp32c3, & esp8266 targets to use built-in esp32flash
2026-04-05 14:15:40 +02:00
esp8266.ld
esp8266: add support for this chip
2020-09-09 19:17:11 +02:00
esp-c3-32s-kit.json
targets: add WaveShare ESP-C3-32S-Kit
2024-10-22 11:21:48 +01:00
fe310.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
feather-m0-express.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m4-can.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-nrf52840-sense.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-nrf52840.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
feather-rp2040-boot-stage2.S
feather-rp2040,macropad-rp2040: fix qspi-flash settings
2022-07-05 16:37:45 +02:00
feather-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
feather-stm32f405.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
gameboy-advance.json
compiler: implement recover() built-in function
2022-06-16 07:59:21 +02:00
gameboy-advance.ld
main: add initial support for (in-development) LLVM 11
2020-10-13 20:23:50 +02:00
gameboy-advance.s
fix GBA ROM header
2021-09-05 19:59:26 +02:00
gemma-m0.json
Board support for Adafruit Gemma M0 (#3903)
2023-09-11 11:11:26 +02:00
gnse.json
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
gobadge.json
targets: add GoBadge target as alias for PyBadge :)
2023-09-10 15:52:55 +02:00
gopher-arcade.json
Added Gopher ARCADE board
2025-09-20 08:35:34 +02:00
gopher-badge.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
gopherbot2.json
target: add gopherbot and gopherbot2 aliases to simplify for newer users
2022-07-26 08:06:24 +02:00
gopherbot.json
target: add gopherbot and gopherbot2 aliases to simplify for newer users
2022-07-26 08:06:24 +02:00
grandcentral-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
hifive1b.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
hifive1b.ld
all: add HiFive1 rev B board with RISC-V architecture
2019-07-07 14:03:24 +02:00
hw-651-s110v8.json
board: support for NRF51 HW-651 (#4712)
2025-01-30 05:46:52 +01:00
hw-651.json
board: support for NRF51 HW-651 (#4712)
2025-01-30 05:46:52 +01:00
itsybitsy-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
itsybitsy-m4.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
itsybitsy-nrf52840.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
k210.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
kb2040.json
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
lgt92.json
Target MCU was not properly defined for LGT92 target
2023-01-25 14:11:28 +01:00
lm3s6965.ld
all: add emulation support for Cortex-M3 with QEMU
2018-10-08 17:07:19 +02:00
lorae5.json
stm32: add minimal stm32wlex5 / lorae5 target
2021-11-20 12:07:11 +01:00
m5paper.json
targets: add support for m5paper
2024-05-12 16:09:27 +02:00
m5stack-core2.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
m5stack.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
m5stamp-c3.json
m5stamp-c3: change settings to explicitly use UART
2023-11-29 08:11:46 +01:00
m5stick-c.json
Support for the M5STACK M5StickC ESP32-PICO device
2023-06-08 09:27:41 +02:00
macropad-rp2040-boot-stage2.S
feather-rp2040,macropad-rp2040: fix qspi-flash settings
2022-07-05 16:37:45 +02:00
macropad-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
maixbit.json
Revert "fix: flash-command for maixbit board"
2022-04-12 17:13:32 +02:00
maixbit.ld
all: remove support for LLVM 9
2021-03-04 15:46:05 +01:00
makerfabs-esp32c3spi35.json
Support for Makerfabs ESP32C3SPI35 TFT Touchscreen board
2023-01-26 20:16:11 +01:00
matrixportal-m4.json
targets: add ninafw tag to Arduino mkrwifi1010 and Adafruit Matrix Portal M4 for drivers netlink support
2024-01-15 19:34:05 -05:00
mch2022.json
boards: Add MCH2022 badge
2022-07-16 08:31:22 +02:00
mdbt50qrx-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
metro-m4-airlift.json
targets: add ninafw pins and settings to Adafruit Metro M4 Airlift board
2024-01-15 19:34:05 -05:00
metro-rp2350.json
feat: add metro-rp2350 board definition (#4989)
2025-08-10 09:32:16 +02:00
microbit-s110v8.json
microbit: reelboard: flash using OpenOCD when needed
2020-09-15 17:07:40 +02:00
microbit-v2-s113v7.json
fix: use OpenOCD flash method on microbit v2 when using Nordic Semi SoftDevice
2025-04-26 15:39:39 +00:00
microbit-v2-s140v7.json
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
microbit-v2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
microbit.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
mimxrt1062-teensy40.ld
teensy40: enable hardware UART reconfiguration, fix receive watermark interrupt
2021-09-13 09:29:20 +02:00
mksnanov3.json
mksnanov3: limit programming speed to 1800 kHz
2024-04-27 13:02:20 +02:00
nano-33-ble-s140v6-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nano-33-ble-s140v7-uf2.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nano-33-ble-s140v7.json
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nano-33-ble.json
targets: remove "acm:"` prefix for USB vid/pid pair
2022-10-16 10:02:48 +02:00
nano-33-ble.ld
board/nano-33-ble: pins, blinking leds and serial
2021-06-14 00:06:59 +02:00
nano-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
nicenano.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nintendoswitch.json
all: add support for LLVM 19
2025-01-20 06:15:33 +01:00
nintendoswitch.ld
nintendoswitch: Add env parser and removed unused stuff
2020-11-03 23:28:55 +01:00
nintendoswitch.s
nintendoswitch: Add env parser and removed unused stuff
2020-11-03 23:28:55 +01:00
nodemcu.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
nrf51-s110v8.json
nrf: add microbit-s110v8 target
2020-05-26 18:50:33 +02:00
nrf51-s110v8.ld
nrf: add microbit-s110v8 target
2020-05-26 18:50:33 +02:00
nrf51.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf51.ld
nrf: add micro:bit board
2018-10-06 13:04:14 +02:00
nrf52-s132v6.json
nrf: fix nrf52-s132v6 config
2019-11-16 21:57:18 +01:00
nrf52-s132v6.ld
nrf: fix nrf52832 flash size
2020-10-20 19:13:43 +02:00
nrf52.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52.ld
nrf: fix nrf52832 flash size
2020-10-20 19:13:43 +02:00
nrf52833-s113v7.json
microbit-v2: add support for S113 SoftDevice
2021-04-14 22:55:52 +02:00
nrf52833-s113v7.ld
microbit-v2: add support for S113 SoftDevice
2021-04-14 22:55:52 +02:00
nrf52833-s140v7.json
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
nrf52833-s140v7.ld
targets: add target for Microbit v2 with SoftDevice S140 support for both peripheral and central
2025-04-26 15:39:50 +00:00
nrf52833.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52833.ld
machine/microbit-v2: add initial support based on work done by @alankrantas thank you!
2021-01-06 18:50:46 +01:00
nrf52840-mdk-usb-dongle.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
nrf52840-mdk.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
nrf52840-s140v6-uf2-generic.json
nrf52840: generic board support (#4121)
2024-02-12 10:37:19 +01:00
nrf52840-s140v6-uf2.json
nrf52: cleanup s140v6 uf2 targets
2022-08-07 11:27:49 +02:00
nrf52840-s140v6-uf2.ld
nrf52: cleanup s140v6 uf2 targets
2022-08-07 11:27:49 +02:00
nrf52840-s140v7-uf2.json
nrf52: cleanup s140v7 uf2 targets
2022-08-07 12:58:36 +02:00
nrf52840-s140v7-uf2.ld
nrf52: cleanup s140v7 uf2 targets
2022-08-07 12:58:36 +02:00
nrf52840-s140v7.json
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nrf52840-s140v7.ld
nano-33-ble: SoftDevice s140v7 support
2021-11-03 20:54:40 +01:00
nrf52840.json
Revert "Bump CMSIS to 5.9.0"
2022-12-16 21:26:49 +01:00
nrf52840.ld
nrf: add nrf52840-mdk board
2018-10-18 15:07:06 +02:00
nucleo-f103rb.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-f722ze.json
targets/nucleo-f722ze.json: add build-tag stm32f722, change stm32f7x2.s to ..722.s
2026-04-05 14:15:40 +02:00
nucleo-g0b1re.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
nucleo-l031k6.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-l432kc.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-l476rg.json
add stm32 nucleol476rg support
2024-04-19 20:50:00 +02:00
nucleo-l552ze.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
nucleo-wl55jc.json
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
nxpmk66f18.ld
Cleanup Teensy 3.6 linker script
2020-07-13 12:35:53 +02:00
p1am-100.json
p1am-100: remove duplicate build tags
2022-08-29 09:44:03 +02:00
particle-3rd-gen.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
particle-argon.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
particle-boron.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
particle-xenon.json
Apply review suggestions
2020-02-18 23:34:56 +01:00
pca10031.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10040-s132v6.json
nrf: fix nrf52-s132v6 config
2019-11-16 21:57:18 +01:00
pca10040.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10056-s140v6-uf2.json
adding new uf2 target for PCA10056 (#3765)
2023-08-19 11:06:17 +02:00
pca10056-s140v7.json
nrf: support for SoftDevice s140 PCA10056 board
2019-11-20 16:43:55 +01:00
pca10056.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
pca10059-s140v7.json
Add pca10059-s140v7 as a target
2024-03-23 10:23:07 +01:00
pca10059.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
pca10059.ld
initial support for pca10059
2021-03-28 21:38:05 +02:00
pga2350.json
machine/rp2350: add flash support for rp2350 (#4803)
2025-03-16 09:45:53 +01:00
pico2-ice.json
Create "pico2-ice" target board (#5062)
2025-10-13 13:19:04 +02:00
pico2-w.json
targets: add target for pico2-w board
2025-02-28 20:02:35 +01:00
pico2.json
machine/rp2350: add flash support for rp2350 (#4803)
2025-03-16 09:45:53 +01:00
pico-boot-stage2.S
rp2040: support Adafruit Feather RP2040
2021-06-19 12:34:40 +02:00
pico-plus2.json
target: add Pimoroni Pico Plus2 (#4735)
2025-02-21 09:56:52 +01:00
pico-w.json
targets: add cyw43439 tag to badger2040-w and also add new pico-w target for wireless support
2024-06-11 07:57:58 +02:00
pico.json
Bump default stack size for target pico to 8kb from 2kb
2023-11-12 19:22:50 +01:00
pinetime.json
pinetime: update the target file
2023-05-09 19:44:00 +02:00
pybadge.json
targets: add ninafw pins and settings to Adafruit PyBadge board with AirLift Featherwing
2024-01-15 19:34:05 -05:00
pygamer.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
pyportal.json
Adding additional build tag for boards with ninafw
2024-01-07 16:06:16 +01:00
qtpy-esp32c3.json
targets: add Adafruit qtpy-esp32c3 board support
2023-11-28 23:57:30 +01:00
qtpy-rp2040-boot-stage2.S
Add qtpy-rp2040 to TinyGo v0.25.0
2022-09-02 15:06:37 +02:00
qtpy-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
qtpy.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
rak4631.json
add board: RAKwireless RAK4631 (#4454)
2024-09-05 11:49:36 +02:00
reelboard-s140v7.json
microbit: reelboard: flash using OpenOCD when needed
2020-09-15 17:07:40 +02:00
reelboard.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
riscv32.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
riscv64.json
all: switch to LLVM 16
2023-09-18 21:58:02 +02:00
riscv-qemu.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
riscv-qemu.ld
ci: add more tests for wasm and baremetal
2025-03-10 03:26:30 -07:00
riscv.json
compiler: implement recover() built-in function
2022-06-16 07:59:21 +02:00
riscv.ld
all: add support for multicore scheduler
2025-06-12 21:04:36 +02:00
rp2040-boot-stage2.S
rp2040: add missing suffix to CMD_READ_STATUS
2023-07-03 10:52:33 +02:00
rp2040.json
targets: switch rp2040/rp2350 to default to tasks scheduler
2026-04-05 14:15:40 +02:00
rp2040.ld
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
rp2350_embedded_block.s
Add RP2350 support (#4459)
2024-12-18 19:36:30 +01:00
rp2350.json
targets: switch rp2040/rp2350 to default to tasks scheduler
2026-04-05 14:15:40 +02:00
rp2350.ld
machine/rp2350: add flash support for rp2350 (#4803)
2025-03-16 09:45:53 +01:00
rp2350b.json
machine/rp2350: extending support to include the rp2350b
2025-02-21 09:56:52 +01:00
simavr.json
avr: get go test -target=simavr to work
2022-05-18 15:20:09 +02:00
stm32.ld
stm32: initial support
2018-09-22 01:51:44 +02:00
stm32f4disco-1.json
machine/stm32f4disco: add updated target file for newer version of board that have updated st-link
2020-06-30 14:08:20 +02:00
stm32f4disco.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32f7x2zetx.ld
Nucleo f722ze (#1526)
2020-12-15 06:51:35 +01:00
stm32f103rb.ld
machine/stm32f103xx/nucleo-f103rb: add support for NUCLEO-F103RB STM32F1-based board
2019-09-17 13:26:26 +02:00
stm32f405.ld
add STM32F405 machine/runtime, and new board/target feather-stm32f405
2020-09-11 09:09:02 +02:00
stm32f407.ld
stm32: add support for the STM32F4Discovery
2019-04-13 13:32:05 +02:00
stm32f469.ld
targets,runtime,machine: add support for the stm32f469-disco board
2021-12-31 10:30:48 +00:00
stm32f469disco.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32g0b1.json
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32g0b1.ld
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32g0b1cb.ld
Add stm32g0b1 support (#5150)
2026-01-06 23:12:02 +01:00
stm32l0x1.json
stm32: add support for the STM32L031G6U6
2025-07-17 16:35:05 +02:00
stm32l0x2.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32l4x2.ld
Add support for nucleol432 board
2021-03-23 08:33:59 +01:00
stm32l4x5.ld
stm32: add blues wireless swan
2022-01-13 07:56:08 +01:00
stm32l4x6.ld
add stm32 nucleol476rg support
2024-04-19 20:50:00 +02:00
stm32l5x2xe.ld
nucleol552ze: implementation with CLOCK, LED, and UART
2021-02-16 12:48:52 +01:00
stm32l031k6.ld
stm32: add nucleo-l031k6 support
2021-04-07 17:20:19 +02:00
stm32l031x6.ld
stm32: add support for the STM32L031G6U6
2025-07-17 16:35:05 +02:00
stm32l072czt6.ld
Support for STM32L0 MCUs and Dragino LGT92 device (#1561)
2021-01-08 22:27:25 +01:00
stm32wl5x_cm4.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32wle5.json
Revert "all: move stm32 files to separate repository"
2022-02-28 10:19:26 +01:00
stm32wlx.ld
stm32/stm32wlx: Add support for stm32wl55_cm4
2021-12-13 16:02:00 +01:00
swan.json
targets/swan: rename group build tag stm32l4x5 => stm32l4y5 to avoid clash with stm32 device name
2026-04-05 14:15:40 +02:00
teensy36.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
teensy36.s
Viable NXP/Teensy support
2020-07-08 21:58:15 +02:00
teensy40.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
teensy40.s
teensy40: initial implementation
2020-11-11 18:34:47 +01:00
teensy41.json
targets: do not set stack size per board
2022-10-14 13:36:42 +02:00
thingplus-rp2040.json
rp2040: unify all linker scripts using LDFLAGS
2023-03-30 23:49:02 +02:00
thumby.json
targets: add support for Thumby
2024-02-23 14:00:57 +01:00
tiny2350.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
tkey.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
tkey.ld
targets: add implementation for Tillitis TKey device (#4631)
2024-12-14 14:26:03 +01:00
trinket-m0.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
trinkey-qt2040-boot-stage2.S
machine: Add support for Adafruit QT2040 board.
2022-08-28 10:16:52 +02:00
trinkey-qt2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
tufty2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
vicharak_shrike-lite.json
targets: Add Shrike Lite board (#5170)
2026-04-05 14:15:39 +02:00
wasi.json
targets: add wasi.json that inherits wasip1.json
2024-03-27 16:01:40 +01:00
wasip1.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasip2.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasm_exec.js
wasm: use int64 instead of float64 for the timeUnit
2025-04-15 09:23:23 +02:00
wasm-undefined.txt
wasm: do not allow undefined symbols
2022-09-08 08:25:27 +02:00
wasm-unknown.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
wasm.json
all: add full LLVM 20 support
2025-09-17 05:28:06 -04:00
waveshare-rp2040-tiny.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
waveshare-rp2040-zero.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
wioterminal.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
x9pro.json
all: add a flag to the command line to select the serial implementation
2021-06-25 17:58:39 +02:00
xiao-ble.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
xiao-esp32c3.json
boards: Add XIAO ESP32C3 board
2022-08-26 12:44:04 +02:00
xiao-esp32s3.json
target: add xiao-esp32s3 board target
2025-11-24 14:30:50 +00:00
xiao-rp2040.json
targets: set default stanck size to 8k for rp2040/rp2350 based boards where this was not already the case.
2025-08-18 12:23:51 +02:00
xiao-rp2350.json
targets: add support for Seeedstudio Xiao-RP2350 board.
2026-04-05 14:15:40 +02:00
xiao.json
targets: make msd-volume-name an array
2023-04-17 18:56:32 +02:00
xtensa.json
Also disable asynchronous unwind tables
2022-04-11 14:58:55 +02:00