Without this change, a pending interrupt would spuriously trigger
immediately after enabling. This happens if an interrupt is triggered
during flashing (e.g. by DMA), which survives the subsequent reset.
This behaviour matches e.g. `machine.irqSet` in machine_rp2_rp2350.go.
See 7f970a45, whose symptoms were likely caused by spurious interrupts.
Removes usage of AsmFull which required an optimization pass to remove the map parameter passed into it. This caused issues when compiling with -opt=0 where memory for the map was being allocated as an unintended side-effect of using AsmFull with no optimizations enabled.
The Go tools only consider lowercase .s files to be assembly files. By
renaming these to uppercase .S files they won't be discovered by the Go
toolchain and listed as the SFiles to be assembled.
There is a difference between .s and .S: only uppercase .S will be
passed through the preprocessor. Doing that is normally safe, and
definitely safe in the case of these files.
Go 1.19 started reformatting code in a way that makes it more obvious
how it will be rendered on pkg.go.dev. It gets it almost right, but not
entirely. Therefore, I had to modify some of the comments so that they
are formatted correctly.
Do it all at once in preparation for Go 1.18 support.
To make this commit, I've simply modified the `fmt-check` Makefile
target to rewrite files instead of listing the differences. So this is a
fully mechanical change, it should not have introduced any errors.
There were a few issues that were causing qemu-system-arm and
qemu-system-riscv to give the wrong exit codes. They are in fact capable
of exiting with 0 or 1 signalled from the running application, but this
functionality wasn't used. This commit changes this in the following
ways:
* It fixes SemiHosting codes, which were incorrectly written in
decimal while they should have been written in hexadecimal (oops!).
* It modifies all the baremetal main functions (aka reset handlers) to
exit with `exit(0)` instead of `abort()`.
* It changes `syscall.Exit` to call `exit(code)` instead of `abort()`
on baremetal targets.
* It adds these new exit functions where necessary, implemented in a
way that signals the correct exit status if running under QEMU.
All in all, this means that `tinygo test` doesn't have to look at the
output of a test to determine the outcome. It can simply look at the
exit code.
On some boards the FPU is already enabled on startup, probably as part
of the bootloader. On other chips it was enabled as part of the runtime
startup code. In all these cases, enabling the FPU is currently
unsupported: the automatic stack sizing of goroutines assumes that the
processor won't need to reserve space for FPU registers. Enabling the
FPU therefore can lead to a stack overflow.
This commit either removes the code that enables the FPU, or simply
disables it in startup code. A future change should fully enable the FPU
so that operations on float32 can be performed by the FPU instead of in
software, greatly speeding up such code.
This is a big change that will determine the stack size for many
goroutines automatically. Functions that aren't recursive and don't call
function pointers can in many cases have an automatically determined
worst case stack size. This is useful, as the stack size is usually much
lower than the previous hardcoded default of 1024 bytes: somewhere
around 200-500 bytes is common.
A side effect of this change is that the default stack sizes (including
the stack size for other architectures such as AVR) can now be changed
in the config JSON file, making it tunable per application.
For now, this is just an extra flag that can be used to print stack
frame information, but this is intended to provide a way to determine
stack sizes for goroutines at compile time in many cases.
Stack sizes are often somewhere around 350 bytes so are in fact not all
that big usually. Once this can be determined at compile time in many
cases, it is possible to use this information when available and as a
result increase the fallback stack size if the size cannot be determined
at compile time. This should reduce stack overflows while at the same
time reducing RAM consumption in many cases.
Interesting output for testdata/channel.go:
function stack usage (in bytes)
Reset_Handler 332
.Lcommand-line-arguments.fastreceiver 220
.Lcommand-line-arguments.fastsender 192
.Lcommand-line-arguments.iterator 192
.Lcommand-line-arguments.main$1 184
.Lcommand-line-arguments.main$2 200
.Lcommand-line-arguments.main$3 200
.Lcommand-line-arguments.main$4 328
.Lcommand-line-arguments.receive 176
.Lcommand-line-arguments.selectDeadlock 72
.Lcommand-line-arguments.selectNoOp 72
.Lcommand-line-arguments.send 184
.Lcommand-line-arguments.sendComplex 192
.Lcommand-line-arguments.sender 192
.Lruntime.run$1 548
This shows that the stack size (if these numbers are correct) can in
fact be determined automatically in many cases, especially for small
goroutines. One of the great things about Go is lightweight goroutines,
and reducing stack sizes is very important to make goroutines
lightweight on microcontrollers.
Calling errors.New in an error path causes a heap allocation at an
already unfortunate moment. It is more efficient to create these error
values in globals and return these constant globals. If these errors are
not used (because the related code was optimized out), the globals will
also be optimized out.
* device/arm: add system timer registers
Add SYST registers and bit definitions to device/arm.
Add a setup function.
Add an example that uses it to blink an LED.
This change results in changes to all smoketests for Cortex-M based
chips: they get a bit smaller (32-48 bytes). I'm not sure why but
probably because the inliner made a different inlining decision. There
was a similar effect when files generated from SVD files switched to the
new volatile types so it's probably harmless.
This is very useful for debugging. It differentiates between a stack
overflow and other errors (because it's easy to see when a stack
overflow occurs) and prints the old stack pointer and program counter if
available.
This is one step towards removing unnecessary special casts in most
cases. It is also part of removing as much magic as possible from the
compiler (the pragma is explicit, the special name is not).
Don't store addresses in the values of registers, this leads to problems
with char arrays (among others). Instead, do it like it's done in C with
raw addresses cast to struct pointers.
This commit also splits gen-device.py, as AVR and ARM have very
different ideas of what a register is. It's easier to just keep them
separate.
Elias Naur
Justin A. Wilson
Yurii Soldak
Ayke van Laethem
ardnew
Ethan Reesor
Jaden Weiss
Infinoid
Ron Evans