8890b57ba0
Add I2C support for esp32 ( #4259 )
...
machine/esp32: add i2c support
2024-05-13 21:58:06 +02:00
ee3a05f1de
targets: add support for Badger2040 W
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-05-13 20:10:36 +02:00
1d9f26cee1
targets: add support for m5paper
2024-05-12 16:09:27 +02:00
6e58c44390
machine: add TxFifoFreeLevel() for CAN
2024-05-10 18:45:06 +02:00
7d6b667bba
machine/stm32: add i2c Frequency and SetBaudRate() function for boards that were missing implementation
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-05-08 10:57:46 +02:00
d419cc11bf
simulator: add support for GetRNG
...
This is needed to be able to simulate the Gopher Badge code:
https://github.com/conejoninja/gopherbadge
2024-04-28 23:59:23 +02:00
441dfc98d7
simulator: fix I2C support
...
- Add ReadRegister and WriteRegister (because they're still used by
some packages).
- Fix out-of-bounds panic in I2C.Tx when either w or r has a length of
zero (or is nil).
2024-04-28 23:05:49 +02:00
797a5a2031
machine/thingplus_rp2040, machine/waveshare-rp2040-zero:add WS2812 definition
2024-04-24 08:50:53 +02:00
1154212c15
chore: fix function names in comment
...
Signed-off-by: hongkuang <liurenhong@outlook.com >
2024-04-20 14:58:06 +02:00
22bf045c9a
add stm32 nucleol476rg support
2024-04-19 20:50:00 +02:00
39029cc376
Run Nick G's spellchecker github.com/client9/misspell, carefuly fix what it found ( #4235 )
2024-04-19 06:57:01 -07:00
85b59e66da
machine: add __tinygo_spi_tx function to simulator
...
This is much, _much_ faster than __tinygo_spi_transfer which can only
transfer a single byte at a time. This is especially important for
simulated displays.
I've already implemented the browser side of this on the playground and
have used this patch for local testing where it massively speeds up
display operations.
2024-04-13 11:38:18 +02:00
90b0bf646c
rp2040: make all RP2040 boards available for simulation
...
This makes all rp2040 boards available for simulation using
-tags=<board_name>. Importantly, this includes the Gopher Badge which
I'm working on to add to the TinyGo Playground.
2024-04-04 19:34:01 +02:00
c55ac9f28e
rp2040: move UART0 and UART1 to common file
...
This is makes it easier to use these in simulation, plus it avoids
duplication. The only downside I see is that more UARTs get defined than
a board supports, but no existing code should break (no UARTs get
renamed for example).
2024-04-04 19:34:01 +02:00
62d8cdb218
Map the rest of the pinout
2024-03-27 11:55:25 +01:00
b6fdbee14e
Begin implementing support for Adafruit ESP32 Feather V2
2024-03-27 11:55:25 +01:00
6714974aba
feather-nrf52840-sense doesn't use LFXO
2024-03-21 20:29:02 +01:00
c66836cf3a
targets: add support for Thumby
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-02-23 14:00:57 +01:00
5557e97888
device: update SVD files
...
This updates lib/cmsis-svd, pulling in the updates to the Espressif SVD
files here:
https://github.com/cmsis-svd/cmsis-svd-data/pull/3
This is needed for wifi/BLE support on the ESP32-C3 (the older SVD files
were missing some necessary interrupts).
2024-02-19 19:10:21 +01:00
7486277012
all: make TinyGo code usable with "big Go" CGo
...
I managed to get CGo sort-of working in VSCode (meaning that it will
typecheck code in the IDE itself) using a few crude hacks, but it
requires a few minor changes to the TinyGo standard library.
I intend to eventually add this support in the TinyGo extension for
VSCode directly, but for now I've manually updated .vscode/settings.json
to get IDE support. In any case, it would be nice to have this for when
I hopefully add this to the TinyGo extension eventually.
2024-02-19 15:49:36 +01:00
828b9614c2
nrf52840: generic board support ( #4121 )
...
machine/nrf52840: generic board support
2024-02-12 10:37:19 +01:00
f5e933cd4d
machine/rp2040: set XOSC startup delay multiplier
...
XOSC requires additional time to stablize on certain RP2040 boards.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com >
2024-02-11 11:59:54 +01:00
edb8766aab
esp32: switch over to the official SVD file
2024-02-09 16:12:21 +01:00
0ea5cfc8fe
rp2040: add definition for machine.PinToggle
2024-01-29 12:38:06 +01:00
45764325b4
targets: add motor control pin definitions for MKS Nano V3x boards
...
Signed-off-by: Elias Naur <mail@eliasnaur.com >
2024-01-23 21:04:22 +01:00
bb66232164
targets: add support for the MKS Robin Nano V3.x
...
Signed-off-by: Elias Naur <mail@eliasnaur.com >
2024-01-23 21:04:22 +01:00
9679e7f1cc
fix typo
2024-01-23 16:52:37 +01:00
5f50c3b60b
machine/samd51: add UART hardware flow control support
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-17 12:41:15 +01:00
cf39d8b2c8
targets: add ninafw pins and settings to Adafruit PyBadge board with AirLift Featherwing
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-15 19:34:05 -05:00
d92a31b440
targets: add ninafw pins and settings to Adafruit Metro M4 Airlift board
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-15 19:34:05 -05:00
8c90f4facf
machine/pyportal: add needed values to board file for ninafw BLE support
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-06 22:46:47 +01:00
81c56c3ab8
machine, targets: ninafw support for arduino-nano33 and nano-rp2040 boards
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-05 19:04:12 +01:00
3d9a1ca22a
machine/samd21: add hardware flow control for UART
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2024-01-05 17:56:45 +01:00
603a81f194
expose UART4 on wioterminal board
...
The right-hand grove port on the wioterminal can be used as UART, using
D0/D1 pins. The pins D0/D1 are tied to SERCOM4, so this patch exposes a
UART4 for sercom4 access.
RX = A0/D0 = PB08/SERCOM4.0 (port 4 pad 0)
TX = A1/D1 = PB09/SERCOM4.1 (port 4 pad 1)
Tested with Lora E5 UART.
uart : = machine.UART4
tx := machine.D0
rx := machine.D1
Note: must also cross Tx/Rx wires in grove cable. See
https://www.lucadentella.it/en/2022/01/29/wio-terminal-porta-grove-di-destra-e-moduli-uart/
2023-12-31 10:54:11 +01:00
8d2a07b927
main: add -serial=rtt support
2023-12-23 08:14:35 -05:00
ffe6dfd21b
machine/nano-rp2040: add UART1 and correct mappings for NINA via UART.
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-20 16:51:21 -05:00
cf21380264
machine/serial, rp2040: add support for hardware flow control
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-20 16:48:12 -05:00
338590cc75
machine/atmega: uart double speed mode
...
Less errors and higher throughput.
Example: default / slow mode is problematic for 115200 on 16Mhz CPU.
2023-12-05 16:29:51 +01:00
c6add1e769
machine/esp32c3: implement RNG
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-04 09:34:20 +01:00
c6609a02fa
machine/esp32c3: move i2c implementation into separate file to skip m5stamp-c3 since it does not appear to expose those pins
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-03 22:05:08 +01:00
19fb1bfafc
machine/esp32c3: corrected implementation for error handling and when to expect NACK
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-03 22:05:08 +01:00
f91b6ad0df
machine/esp32c3: handle defaults for I2C configuration
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-12-03 22:05:08 +01:00
94459cefe5
machine/esp32c3: implement i2c for esp32-c3
2023-12-03 22:05:08 +01:00
2919fa8b14
machine/atmega: bufferSize = 32
...
to save memory on 2k ram targets
also updates sizediff tool to show ram differences
2023-12-03 12:55:22 +01:00
6420e90124
machine/atmega328pb: refactor to enable extra uart
2023-12-02 13:26:59 +01:00
e065da20cb
targets: add Adafruit qtpy-esp32c3 board support
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-11-28 23:57:30 +01:00
d7c77b6761
machine/esp32c3: implement USB_SERIAL for USBCDC communication
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-11-28 23:05:07 +01:00
2b215955ca
machine/usb: add support for ISERIAL descriptor
2023-11-07 00:11:40 +01:00
938ce22307
machine/stm32: implement DeviceID() with unique ID per processor
...
Signed-off-by: deadprogram <ron@hybridgroup.com >
2023-10-27 17:44:53 +02:00
9fb5a5b9a4
nrf,sam,rp2040: add machine.HardwareID function
2023-10-27 13:25:32 +02:00
Johann Freymuth
deadprogram
sago35
Ayke van Laethem
hongkuang
Patrick Ting
dkegel-fastly
Patrick Lindsay
Anders Savill
BCG
Xudong Zheng
Elias Naur
Daniel Esteban
Scott Feldman
Yurii Soldak
Dmitriy
Kenneth Bell