Having them as methods on reflectlite.Value makes them
visible to the user.
Also move new functions out of all_test.go so it can stay
closer to upstream (except for comments).
Generalize the shared esp32xx I2C implementation to also cover the
ESP32-C6 and add the chip-specific code.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Instead of referring to an unused global, use a constant value. This is
safe even when using `-gc=none` (since no actual memory gets allocated)
which wasn't the case before. It should also reduce binary size by a few
bytes for most programs.
This adds a minimal esp32c6 implementation, currently only
supporting the examples/serial and examples/blinky1 programs.
It does correctly output the expected "Hello, World" via the
serial port, as well as blink the onboard LED.
In addition, it adds support for the PLIC based IRQ handling
as used on the ESP32C6 processor.
Some parts of this code are loosely based on PR #5252 and #5248
Signed-off-by: deadprogram <ron@hybridgroup.com>
This converts the heap allocation to a statically allocated string.
This is useful for me, since it reduces binary size and makes it
possible to use `-gc=none` (which would previously result in a linker
error).
This moves the objHeader from before an object body to after it.
On 32-bit systems with 16-byte alignment requirements (x86, ARM, RISC-V), we previously padded the header to a whole block.
This wastes up to 12 bytes, as on -gc=conservative the header is a single pointer.
With this change, no padding is required (beyond that from rounding the size up).
The "head" block in the metadata was moved to the end of the range to match the header location.
This changed the block loop directions throughout the GC logic.
The bit hacks used by sweep no longer work because there is no equivalent of addition that carries downwards.
However it is now possible to merge the sweep and free range list rebuild passes because their loop directions match.
There are two other places where we rebuilt the free ranges list: when initializing or growing the heap.
The former can be easily replaced with a single hardcoded range containing the entire heap.
In the latter case, I opted to only add the new space to the existing list.
These replacements allowed me to fully remove the buildFreeRanges function.
Implement SetStallEPIn, SetStallEPOut, ClearStallEPIn, and ClearStallEPOut methods on the nRF52840 USBDevice struct using the hardware EPSTALL register to support MSC driver requirements. Also, correct the handleUSBIRQ loops to iterate over physical endpoint numbers rather than dynamic configuration entries to prevent missed or incorrectly routed endpoint interrupts.
Remap CDC and MSC endpoints to share physical endpoint numbers. This change separates IN/OUT directional states for RP2 endpoints to prevent cross-talk, ensures SAMD21 and SAMD51 endpoint configuration merging does not overwrite bidirectionally shared registers, implements missing SAMD endpoint stall and clear methods, and corrects SAMD interrupt loop bounds to iterate over physical endpoint numbers rather than dynamic configuration entries.
Replace static endpoint variables with EndpointIN and EndpointOUT
functions. Allows flexible endpoint remapping across USB configs.
Map CDC, HID, MIDI and MSC USB devices to bidirectional endpoints consistently across different configurations.
* gba: add bios interrupt flags
Adds a new GBA register for interrupt flags, the register is equivalent
to the IF register, but is intended for BIOS functions.
Acknowledging the interrupts with this register allows us to use BIOS
halt functions such as VBlankIntrWait and IntrWait, which we can use to
get rid of busy loops in the GBA code.
* fix formatting
---------
Co-authored-by: zoey <git@zoey.si>
Implements `putchar` when `mgbadebug` build tag is set which outputs
text through the mGBA debugging output interface.
mGBA allows the games running in the emulator to output debug text the
process to do so is:
1. set 0x4FFF780 to value of 0xC0DE
2. write text in memory 0x4FFF600 to 0x4FFF700
3. set 0x4FFF700 to the desired log level value from 0x100 (fatal) to
0x104 (debug)
Once this is done mGBA will output the text in its logs view as well as
through stdout. (Setting the log level to fatal also produces a dialog
box with the text)
The text output in the CLI is prefixed with `[DEBUG] GBA Debug: ` so I
modified the regex used for address matching in panic messages to be
able to read the address when the output line doesn't start with
`panic`.
Register a vectored exception handler at startup so Windows hardware
exceptions can be translated into Go panics. Access violations become
nil pointer panics, and integer divide-by-zero exceptions become divide
by zero panics, allowing defer/recover to handle them like ordinary
runtime panics.
Modify the Unix signal handler to redirect execution to a Go sigpanic
function instead of printing an error and re-raising the signal.
The C signal handler modifies the ucontext to make the faulting
instruction appear to have called tinygo_sigpanic, which then calls
runtimePanic with the appropriate message.
Supported on all architectures TinyGo targets on Linux and Darwin:
x86_64, i386, aarch64, ARM, and MIPS. Also registers SIGFPE, which
was previously not handled at all.
Emit fault checkpoints around compiler-generated runtime assertions so
runtimePanicAt can unwind through the existing defer/recover machinery
instead of aborting. This lets panics from bounds checks, type checks,
and other compiler-inserted runtime checks be recovered by deferred
functions.
Mark functions that call recover as noinline. Inlining such a function
into a deferred closure can make recover observe the wrong call context
and report success when it should return nil.
Addresses tinygo-org/tinygo issues 2759 and 3510.
- Uses PLL1 to boost the system clock from the 4 MHz MSIS default to 160 MHz.
- Sets VOS to Range 1 (1.2V) and enables the EPOD booster for higher frequency support.
- Configures flash latency (4 wait states) and enables prefetch for 160 MHz operation.
- Updates CPU and APB timer frequencies in the machine package accordingly.
- Fixes LPUART baud rate divisor computation by using 64-bit arithmetic to prevent
overflow with the newly increased 160 MHz clock.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This fixes several issues in the STM32 UART implementation:
- `writeByte` now waits for the transmit register to be empty before writing, preventing data loss by avoiding overwriting the shift register.
- `flush` now correctly waits for the Transmission Complete (TC) flag.
- The interrupt handler now clears all error flags (ORE, NE, FE, PE) to prevent interrupt storms, rather than just ORE.
- Extracted `SetBaudRate` so it can be cleanly overridden by specific MCU families.
It also introduces specific fixes for the STM32U5 family:
- Enforces a minimum BRR divisor of 16 in `getBaudRateDivisor` to prevent undefined hardware behavior and CPU starvation.
- Overrides `SetBaudRate` for STM32U585 to momentarily disable the USART (UE=0) before updating the BRR register, which is read-only when enabled.
- Adds a readback after enabling the USART1 clock to ensure the clock is active before register access.
Signed-off-by: deadprogram <ron@hybridgroup.com>
Realized this while looking through the code: there is no way to use
this safely when the scheduler is involved. It can only be used safely
with a `wfe` or similar (part of scheduler code).
rdon(あーるどん)
rdon
Damian Gryski
deadprogram
Ayke van Laethem
Nia Waldvogel
Marco Feltmann
Konstantin Sharlaimov
Jake Bailey
zowhoey
sago35
Matthew Hiles
zoey
Kenneth Bell
Juraj Michálek
Pat Whittingslow