This commit changes the number of wait states for the stm32f103 chip to
2 instead of 4. This gets it back in line with the datasheet, but it
also has the side effect of breaking I2C. Therefore, another (seemingly
unrelated) change is needed: the i2cTimeout constant must be increased
to a higher value to adjust to the lower flash wait states - presumably
because the lower number of wait states allows the chip to run code
faster.
Instead of trying to modify periperhals directly, external functions are
called. For example, __tinygo_gpio_set sets a GPIO pin to a specified
value (high or low). It is expected that binaries made this way will be
linked with some extra libraries that implement support for these
functions.
One particularly interesting case is this experimental board simulator:
https://github.com/aykevl/tinygo-play
Compiling code to WebAssembly with the correct build tag for a board
will enable this board to be simulated in the browser.
Atmel/Microchip based SAMD boards are not currently supported, because
their I2C/SPI support is somewhat uncommon and harder to support in the
machine API. They may require a modification to the machine API for
proper support.
Kenneth Bell
Ayke van Laethem
ardnew
deadprogram
GeoffThomas
Yusuke Mitsuki