such as program changes and pitch bend. Also add error handling for invalid
parameter values such as MIDI channel. This however makes a somewhat breaking
change to the current implementation, in that we now use the typical MIDI user
system of counting MIDI channels from 1-16 instead of from 0-15 as the lower
level USB-MIDI API itself expects.
Also add constant values for continuous controller messages, rename SendCC
function, and add SysEx function.
Signed-off-by: deadprogram <ron@hybridgroup.com>
This commit adds I2C timeouts for nrf51 and nrf52 (but not yet for
others like nrf52840).
Tested on the PineTime, where I now got a timeout instead of hanging and
resetting due to a watchdog reset.
* add gosched calls to UART
* add UART.flush() stubs for all supported architectures
* add comment un uart.go on flush functionality
* uart.writeByte as base of UART usage
* fix NXP having duplicate WriteByte
* fix writeByte not returning error on some platforms
* add flush method for fe310 device
* check for error in WriteByte call to writeByte
Found while working on the PineTime. For some reason it still kind of
works in most cases, but I was hitting this issue when interacting with
two different I2C devices (the touch sensor and the BMA421).
The regular port access is around 4 cycles, instead of the usual 2
cycles for a store instruction on Cortex-M0+. The IOBUS however is
faster, I didn't measure exactly but I guess it's 2 cycles as expected.
This fixes a bug in the WS2812 driver that only happens on samd21 chips:
https://github.com/tinygo-org/drivers/issues/540
I didn't add this method in the initial PR.
Also, I found that a few of my assumptions were incorrect. I've changed
the code that configures the pin to make input (floating and pullup)
actually work. These chips really are quite different from all the older
AVRs.
This is just support for the chip, no boards are currently supported.
However, you can use this target on a custom board.
Notes:
- This required a new runtime and machine implementation, because the
hardware is actually very different (and much nicer than older
AVRs!).
- I had to update gen-device-avr to support this chip. This also
affects the generated output of other AVRs, but I checked all chips
we support and there shouldn't be any backwards incompatible
changes.
- I did not implement peripherals like UART, I2C, SPI, etc because I
don't need them. That is left to do in the future.
You can flash these chips with only a UART and a 1kOhm resistor, which
is really nice (no special hardware needed). Here is the program I've
used for this purpose: https://pypi.org/project/pymcuprog/
* Initialize the ADC in Configure() (instead of in Get()).
* Do not set all channels to "not connected" - that's already the
reset value.
* Don't disable the ADC after use. It's not necessary to disable
(current consumption appears to remain the same whether enabled or
disabled).
* Rename pinetime-devkit0 to pinetime because the production device is
almost the same hardware (the only noticeable difference is a
different accelerometer, which isn't part of the board file).
* Remove the UART and set serial to none. The UART uses a lot of
current by default, so it seems better to disable it.
This is a breaking change, but honestly I think I'm the only one who has
ever actually used TinyGo for the PineTime and I'm fine with this
change :)
deadprogram
Timothy Rule
Pertti Erkkilä
Kenneth Bell
Unrud
sago35
Yurii Soldak
soypat
Ayke van Laethem
ivoszz
Pierre Constantineau
Scott Feldman