This switches the Espressif fork from LLVM 19 to LLVM 20, so we can use
the improvements made between those LLVM versions. It also better aligns
with the system-LLVM build method, which currently also defaults to LLVM
20.
Note that this disables the machine outliner for RISC-V. It appears
there's a bug in there somewhere, with the machine outliner enabled the
crypto/elliptic package tests fail with -target=riscv-qemu.
This should ideally be investigated and reported upstream.
This commit adds support for LLVM 16 and switches to it by default. That
means three LLVM versions are supported at the same time: LLVM 14, 15,
and 16.
This commit includes work by QuLogic:
* Part of this work was based on a PR by QuLogic:
https://github.com/tinygo-org/tinygo/pull/3649
But I also had parts of this already implemented in an old branch I
already made for LLVM 16.
* QuLogic also provided a CGo fix here, which is also incorporated in
this commit:
https://github.com/tinygo-org/tinygo/pull/3869
The difference with the original PR by QuLogic is that this commit is
more complete:
* It switches to LLVM 16 by default.
* It updates some things to also make it work with a self-built LLVM.
* It fixes the CGo bug in a slightly different way, and also fixes
another one not included in the original PR.
* It does not keep compiler tests passing on older LLVM versions. I
have found this to be quite burdensome and therefore don't generally
do this - the smoke tests should hopefully catch most regressions.
This prefix isn't actually used and only adds noise, so remove it.
It may have been useful on Linux that makes a distinction between
/dev/ttyACM* and /dev/ttyUSB* but it isn't now. Also, it's unlikely that
the same vid/pid pair will be shared between an acm and usb driver
anyway.
Switch over to LLVM 14 for static builds. Keep using LLVM 13 for regular
builds for now.
This uses a branch of the upstream Espressif branch to fix an issue,
see: https://github.com/espressif/llvm-project/pull/59
This makes sure that the LLVM target features match the one generated by
Clang:
- This fixes a bug introduced when setting the target CPU for all
targets: Cortex-M4 would now start using floating point operations
while they were disabled in C.
- This will make it possible in the future to inline C functions in Go
and vice versa. This will need some more work though.
There is a code size impact. Cortex-M4 targets are increased slightly in
binary size while Cortex-M0 targets tend to be reduced a little bit.
Other than that, there is little impact.
You can now debug the ESP32-C3 from the TinyGo command line, like this:
tinygo flash -target=esp32c3 examples/serial
tinygo gdb -target=esp32c3 examples/serial
It's important to flash before running `tinygo gdb`, because loading a
new firmware from GDB has not yet been implemented.
Probably the easiest way to connect to the ESP32-C3 is by using the
built-in JTAG connection. See:
https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/api-guides/jtag-debugging/configure-builtin-jtag.html
You will need to make sure that the `openocd` command in your $PATH is
the one from Espressif. Otherwise GDB will hang. You can debug this by
supplying the -ocd-output flag:
$ tinygo gdb -target=esp32c3 -ocd-output examples/serial
Open On-Chip Debugger 0.10.0
openocd: Licensed under GNU GPL v2
openocd: For bug reports, read
openocd: http://openocd.org/doc/doxygen/bugs.html
openocd: embedded:startup.tcl:60: Error: Can't find interface/esp_usb_jtag.cfg
openocd: in procedure 'script'
openocd: at file "embedded:startup.tcl", line 60
Make sure to configure OpenOCD correctly, until you get the correct
version (that includes the string "esp32"):
$ openocd --version
Open On-Chip Debugger v0.10.0-esp32-20210721 (2021-07-21-13:33)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
If you are on Linux, you may also get the following error:
$ tinygo gdb -target=esp32c3 -ocd-output examples/serial
Open On-Chip Debugger v0.10.0-esp32-20210721 (2021-07-21-13:33)
openocd: Licensed under GNU GPL v2
openocd: For bug reports, read
openocd: http://openocd.org/doc/doxygen/bugs.html
openocd: Info : only one transport option; autoselect 'jtag'
openocd: adapter speed: 40000 kHz
openocd:
openocd: Warn : Transport "jtag" was already selected
openocd: Info : Listening on port 6666 for tcl connections
openocd: Info : Listening on port 4444 for telnet connections
openocd: Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
openocd: Error: esp_usb_jtag: could not find or open device!
The error LIBUSB_ERROR_ACCESS means that there is a permission error.
You can fix this by creating the following file:
$ cat /etc/udev/rules.d/50-esp.rules
# ESP32-C3
SUBSYSTEMS=="usb", ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666"
For more details, see:
https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/api-guides/jtag-debugging/index.html
This change adds support for the ESP32-C3, a new chip from Espressif. It
is a RISC-V core so porting was comparatively easy.
Most peripherals are shared with the (original) ESP32 chip, but with
subtle differences. Also, the SVD file I've used gives some
peripherals/registers a different name which makes sharing code harder.
Eventually, when an official SVD file for the ESP32 is released, I
expect that a lot of code can be shared between the two chips.
More information: https://www.espressif.com/en/products/socs/esp32-c3
TODO:
- stack scheduler
- interrupts
- most peripherals (SPI, I2C, PWM, etc)
Ayke van Laethem
deadprogram
Dmitriy