Add ESP32-S3 support (#5091)

* feat: add initial support for ESP32-S3 (#3442)

* feat: add initial support for esp32-s3

* esp32s3: fix merge errors

* esp32s3: Fix Watchdog registers bad names

* esp32s3: fix linker relocation errors and support for ESP binary

* esp32s3: fix memory section overlap

* esp32s3: correct clock frequencies

* esp32s3: more stable cpu

* esp32s3: enable basic gpio support

* esp32s3: simplify loading and check extensions

* esp32s3: synchronize cpu features with clang

* esp32s3: correct iram origin

---------

Co-authored-by: Denys Vitali <denys@denv.it>
Co-authored-by: Olivier Fauchon <ofauchon2204@gmail.com>

src/runtime/runtime_esp32sx.go

@@ -0,0 +1,86 @@
+//go:build esp32s3
+
+package runtime
+
+import (
+	"device/esp"
+	"machine"
+	"unsafe"
+)
+
+//type timeUnit int64
+
+func putchar(c byte) {
+	machine.Serial.WriteByte(c)
+}
+
+func getchar() byte {
+	for machine.Serial.Buffered() == 0 {
+		Gosched()
+	}
+	v, _ := machine.Serial.ReadByte()
+	return v
+}
+
+func buffered() int {
+	return machine.Serial.Buffered()
+}
+
+// Initialize .bss: zero-initialized global variables.
+// The .data section has already been loaded by the ROM bootloader.
+func clearbss() {
+	ptr := unsafe.Pointer(&_sbss)
+	for ptr != unsafe.Pointer(&_ebss) {
+		*(*uint32)(ptr) = 0
+		ptr = unsafe.Add(ptr, 4)
+	}
+}
+
+func initTimer() {
+	// Configure timer 0 in timer group 0, for timekeeping.
+	//   EN:       Enable the timer.
+	//   INCREASE: Count up every tick (as opposed to counting down).
+	//   DIVIDER:  16-bit prescaler, set to 2 for dividing the APB clock by two
+	//             (40MHz).
+	// esp.TIMG0.T0CONFIG.Set(0 << esp.TIMG_T0CONFIG_T0_EN_Pos)
+	esp.TIMG0.T0CONFIG.Set(esp.TIMG_TCONFIG_EN | esp.TIMG_TCONFIG_INCREASE | 2<<esp.TIMG_TCONFIG_DIVIDER_Pos)
+	// esp.TIMG0.T0CONFIG.Set(1 << esp.TIMG_T0CONFIG_T0_DIVCNT_RST_Pos)
+	// esp.TIMG0.T0CONFIG.Set(esp.TIMG_T0CONFIG_T0_EN)
+
+	// Set the timer counter value to 0.
+	esp.TIMG0.T0LOADLO.Set(0)
+	esp.TIMG0.T0LOADHI.Set(0)
+	esp.TIMG0.T0LOAD.Set(0) // value doesn't matter.
+}
+
+func ticks() timeUnit {
+	// First, update the LO and HI register pair by writing any value to the
+	// register. This allows reading the pair atomically.
+	esp.TIMG0.T0UPDATE.Set(0)
+	// Then read the two 32-bit parts of the timer.
+	return timeUnit(uint64(esp.TIMG0.T0LO.Get()) | uint64(esp.TIMG0.T0HI.Get())<<32)
+}
+
+func nanosecondsToTicks(ns int64) timeUnit {
+	// Calculate the number of ticks from the number of nanoseconds. At a 80MHz
+	// APB clock, that's 25 nanoseconds per tick with a timer prescaler of 2:
+	// 25 = 1e9 / (80MHz / 2)
+	return timeUnit(ns / 25)
+}
+
+func ticksToNanoseconds(ticks timeUnit) int64 {
+	// See nanosecondsToTicks.
+	return int64(ticks) * 25
+}
+
+// sleepTicks busy-waits until the given number of ticks have passed.
+func sleepTicks(d timeUnit) {
+	sleepUntil := ticks() + d
+	for ticks() < sleepUntil {
+		// TODO: suspend the CPU to not burn power here unnecessarily.
+	}
+}
+
+func exit(code int) {
+	abort()
+}