Add ESP32-S3 support (#5091)

* feat: add initial support for ESP32-S3 (#3442) * feat: add initial support for esp32-s3 * esp32s3: fix merge errors * esp32s3: Fix Watchdog registers bad names * esp32s3: fix linker relocation errors and support for ESP binary * esp32s3: fix memory section overlap * esp32s3: correct clock frequencies * esp32s3: more stable cpu * esp32s3: enable basic gpio support * esp32s3: simplify loading and check extensions * esp32s3: synchronize cpu features with clang * esp32s3: correct iram origin --------- Co-authored-by: Denys Vitali <denys@denv.it> Co-authored-by: Olivier Fauchon <ofauchon2204@gmail.com>
2026-08-09 13:33:39 +00:00 · 2025-11-24 04:11:47 -07:00
parent 97a2cb4a37
commit fbbaa5e580
9 changed files with 714 additions and 3 deletions
@@ -0,0 +1,312 @@
+//go:build esp32s3
+
+package machine
+
+import (
+	"device/esp"
+	"errors"
+	"runtime/volatile"
+	"unsafe"
+)
+
+const deviceName = esp.Device
+
+const xtalClock = 40_000000       // 40MHz
+const apbClock = 80_000000        // 80MHz
+const cryptoPWMClock = 160_000000 // 160MHz
+
+// GetCPUFrequency returns the current CPU frequency of the chip.
+func GetCPUFrequency() (uint32, error) {
+	switch esp.SYSTEM.GetSYSCLK_CONF_SOC_CLK_SEL() {
+	case 0:
+		return xtalClock / (esp.SYSTEM.GetSYSCLK_CONF_PRE_DIV_CNT() + 1), nil
+	case 1:
+		switch esp.SYSTEM.GetCPU_PER_CONF_CPUPERIOD_SEL() {
+		case 0:
+			return 80e6, nil
+		case 1:
+			return 160e6, nil
+		case 2:
+			// If esp.SYSTEM.GetCPU_PER_CONF_PLL_FREQ_SEL() == 1, this is undefined
+			return 240e6, nil
+		}
+	case 2:
+		//RC Fast Clock
+		return (175e5) / (esp.SYSTEM.GetSYSCLK_CONF_PRE_DIV_CNT() + 1), nil
+	}
+	return 0, errors.New("machine: Unable to determine current cpu frequency")
+}
+
+// SetCPUFrequency sets the frequency of the CPU to one of several targets
+func SetCPUFrequency(frequency uint32) error {
+	// Always assume we are on PLL. Lower frequencies can be set with a different
+	// clock source, but this will change the behavior of APB clock and Crypto PWM
+	// clock
+	//esp.SYSTEM.SetSYSCLK_CONF_SOC_CLK_SEL(1)
+
+	switch frequency {
+	case 80_000000:
+		esp.SYSTEM.SetCPU_PER_CONF_CPUPERIOD_SEL(0)
+		esp.SYSTEM.SetCPU_PER_CONF_PLL_FREQ_SEL(0) // Reduce PLL freq when possible
+		return nil
+	case 160_000000:
+		esp.SYSTEM.SetCPU_PER_CONF_CPUPERIOD_SEL(1)
+		esp.SYSTEM.SetCPU_PER_CONF_PLL_FREQ_SEL(0)
+		return nil
+	case 240_000000:
+		esp.SYSTEM.SetCPU_PER_CONF_PLL_FREQ_SEL(1) // Increase PLL freq when needed
+		esp.SYSTEM.SetCPU_PER_CONF_CPUPERIOD_SEL(2)
+		return nil
+	}
+	return errors.New("machine: Unsupported CPU frequency selected. Supported: 80, 160, 240 MHz")
+}
+
+var (
+	ErrInvalidSPIBus = errors.New("machine: invalid SPI bus")
+)
+
+const (
+	PinOutput PinMode = iota
+	PinInput
+	PinInputPullup
+	PinInputPulldown
+)
+
+// Hardware pin numbers
+const (
+	GPIO0  Pin = 0
+	GPIO1  Pin = 1
+	GPIO2  Pin = 2
+	GPIO3  Pin = 3
+	GPIO4  Pin = 4
+	GPIO5  Pin = 5
+	GPIO6  Pin = 6
+	GPIO7  Pin = 7
+	GPIO8  Pin = 8
+	GPIO9  Pin = 9
+	GPIO10 Pin = 10
+	GPIO11 Pin = 11
+	GPIO12 Pin = 12
+	GPIO13 Pin = 13
+	GPIO14 Pin = 14
+	GPIO15 Pin = 15
+	GPIO16 Pin = 16
+	GPIO17 Pin = 17
+	GPIO18 Pin = 18
+	GPIO19 Pin = 19
+	GPIO20 Pin = 20
+	GPIO21 Pin = 21
+	GPIO26 Pin = 26
+	GPIO27 Pin = 27
+	GPIO28 Pin = 28
+	GPIO29 Pin = 29
+	GPIO30 Pin = 30
+	GPIO31 Pin = 31
+	GPIO32 Pin = 32
+	GPIO33 Pin = 33
+	GPIO34 Pin = 34
+	GPIO35 Pin = 35
+	GPIO36 Pin = 36
+	GPIO37 Pin = 37
+	GPIO38 Pin = 38
+	GPIO39 Pin = 39
+	GPIO40 Pin = 40
+	GPIO41 Pin = 41
+	GPIO42 Pin = 42
+	GPIO43 Pin = 43
+	GPIO44 Pin = 44
+	GPIO45 Pin = 45
+	GPIO46 Pin = 46
+	GPIO47 Pin = 47
+	GPIO48 Pin = 48
+)
+
+// Configure this pin with the given configuration.
+func (p Pin) Configure(config PinConfig) {
+	// Output function 256 is a special value reserved for use as a regular GPIO
+	// pin. Peripherals (SPI etc) can set a custom output function by calling
+	// lowercase configure() instead with a signal name.
+	p.configure(config, 256)
+}
+
+// configure is the same as Configure, but allows for setting a specific input
+// or output signal.
+// Signals are always routed through the GPIO matrix for simplicity. Output
+// signals are configured in FUNCx_OUT_SEL_CFG which selects a particular signal
+// to output on a given pin. Input signals are configured in FUNCy_IN_SEL_CFG,
+// which sets the pin to use for a particular input signal.
+func (p Pin) configure(config PinConfig, signal uint32) {
+	if p == NoPin {
+		// This simplifies pin configuration in peripherals such as SPI.
+		return
+	}
+
+	ioConfig := uint32(0)
+
+	// MCU_SEL: Function 1 is always GPIO
+	ioConfig |= (1 << esp.IO_MUX_GPIO_MCU_SEL_Pos)
+
+	// FUN_IE: Make this pin an input pin (always set for GPIO operation)
+	ioConfig |= esp.IO_MUX_GPIO_FUN_IE
+
+	// DRV: Set drive strength to 20 mA as a default. Pins 17 and 18 are special
+	var drive uint32
+	if p == GPIO17 || p == GPIO18 {
+		drive = 1 // 20 mA
+	} else {
+		drive = 2 // 20 mA
+	}
+	ioConfig |= (drive << esp.IO_MUX_GPIO_FUN_DRV_Pos)
+
+	// WPU/WPD: Select pull mode.
+	if config.Mode == PinInputPullup {
+		ioConfig |= esp.IO_MUX_GPIO_FUN_WPU
+	} else if config.Mode == PinInputPulldown {
+		ioConfig |= esp.IO_MUX_GPIO_FUN_WPD
+	}
+
+	// Set configuration
+	ioRegister := p.ioMuxReg()
+	ioRegister.Set(ioConfig)
+
+	switch config.Mode {
+	case PinOutput:
+		// Set the 'output enable' bit.
+		if p < 32 {
+			esp.GPIO.ENABLE_W1TS.Set(1 << p)
+		} else {
+			esp.GPIO.ENABLE1_W1TS.Set(1 << (p - 32))
+		}
+		// Set the signal to read the output value from. It can be a peripheral
+		// output signal, or the special value 256 which indicates regular GPIO
+		// usage.
+		p.outFunc().Set(signal)
+	case PinInput, PinInputPullup, PinInputPulldown:
+		// Clear the 'output enable' bit.
+		if p < 32 {
+			esp.GPIO.ENABLE_W1TC.Set(1 << p)
+		} else {
+			esp.GPIO.ENABLE1_W1TC.Set(1 << (p - 32))
+		}
+		if signal != 256 {
+			// Signal is a peripheral function (not a simple GPIO). Connect this
+			// signal to the pin.
+			// Note that outFunc and inFunc work in the opposite direction.
+			// outFunc configures a pin to use a given output signal, while
+			// inFunc specifies a pin to use to read the signal from.
+			inFunc(signal).Set(esp.GPIO_FUNC_IN_SEL_CFG_SEL | uint32(p)<<esp.GPIO_FUNC_IN_SEL_CFG_IN_SEL_Pos)
+		}
+	}
+}
+
+// ioMuxReg returns the IO_MUX_n_REG register used for configuring the io mux for
+// this pin
+func (p Pin) ioMuxReg() *volatile.Register32 {
+	return (*volatile.Register32)(unsafe.Add(unsafe.Pointer(&esp.IO_MUX.GPIO0), uintptr(p)*4))
+}
+
+// outFunc returns the FUNCx_OUT_SEL_CFG register used for configuring the
+// output function selection.
+func (p Pin) outFunc() *volatile.Register32 {
+	return (*volatile.Register32)(unsafe.Add(unsafe.Pointer(&esp.GPIO.FUNC0_OUT_SEL_CFG), uintptr(p)*4))
+}
+
+// inFunc returns the FUNCy_IN_SEL_CFG register used for configuring the input
+// function selection.
+func inFunc(signal uint32) *volatile.Register32 {
+	return (*volatile.Register32)(unsafe.Add(unsafe.Pointer(&esp.GPIO.FUNC0_IN_SEL_CFG), uintptr(signal)*4))
+}
+
+// Set the pin to high or low.
+// Warning: only use this on an output pin!
+func (p Pin) Set(value bool) {
+	if value {
+		reg, mask := p.portMaskSet()
+		reg.Set(mask)
+	} else {
+		reg, mask := p.portMaskClear()
+		reg.Set(mask)
+	}
+}
+
+// Return the register and mask to enable a given GPIO pin. This can be used to
+// implement bit-banged drivers.
+//
+// Warning: only use this on an output pin!
+func (p Pin) PortMaskSet() (*uint32, uint32) {
+	reg, mask := p.portMaskSet()
+	return &reg.Reg, mask
+}
+
+// Return the register and mask to disable a given GPIO pin. This can be used to
+// implement bit-banged drivers.
+//
+// Warning: only use this on an output pin!
+func (p Pin) PortMaskClear() (*uint32, uint32) {
+	reg, mask := p.portMaskClear()
+	return &reg.Reg, mask
+}
+
+func (p Pin) portMaskSet() (*volatile.Register32, uint32) {
+	if p < 32 {
+		return &esp.GPIO.OUT_W1TS, 1 << p
+	} else {
+		return &esp.GPIO.OUT1_W1TS, 1 << (p - 32)
+	}
+}
+
+func (p Pin) portMaskClear() (*volatile.Register32, uint32) {
+	if p < 32 {
+		return &esp.GPIO.OUT_W1TC, 1 << p
+	} else {
+		return &esp.GPIO.OUT1_W1TC, 1 << (p - 32)
+	}
+}
+
+// Get returns the current value of a GPIO pin when the pin is configured as an
+// input or as an output.
+func (p Pin) Get() bool {
+	if p < 32 {
+		return esp.GPIO.IN.Get()&(1<<p) != 0
+	} else {
+		return esp.GPIO.IN1.Get()&(1<<(p-32)) != 0
+	}
+}
+
+var DefaultUART = UART0
+
+var (
+	UART0  = &_UART0
+	_UART0 = UART{Bus: esp.UART0, Buffer: NewRingBuffer()}
+	UART1  = &_UART1
+	_UART1 = UART{Bus: esp.UART1, Buffer: NewRingBuffer()}
+	UART2  = &_UART2
+	_UART2 = UART{Bus: esp.UART2, Buffer: NewRingBuffer()}
+)
+
+type UART struct {
+	Bus    *esp.UART_Type
+	Buffer *RingBuffer
+}
+
+func (uart *UART) Configure(config UARTConfig) {
+	if config.BaudRate == 0 {
+		config.BaudRate = 115200
+	}
+	// Crystal clock source is selected by default
+	uart.Bus.CLKDIV.Set(xtalClock / config.BaudRate)
+}
+
+func (uart *UART) writeByte(b byte) error {
+	for (uart.Bus.STATUS.Get()>>16)&0xff >= 128 {
+		// Read UART_TXFIFO_CNT from the status register, which indicates how
+		// many bytes there are in the transmit buffer. Wait until there are
+		// less than 128 bytes in this buffer (the default buffer size).
+	}
+	uart.Bus.FIFO.Set(uint32(b))
+	return nil
+}
+
+func (uart *UART) flush() {}
+
+// TODO: SPI