Add support for nucleol432 board

LED and UART are working

src/machine/board_nucleol432kc.go

@@ -0,0 +1,46 @@
+// +build nucleol432kc
+
+package machine
+
+import (
+	"device/stm32"
+	"runtime/interrupt"
+)
+
+const (
+	LED         = LED_BUILTIN
+	LED_BUILTIN = LED_GREEN
+	LED_GREEN   = PB3
+)
+
+// UART pins
+const (
+	// PA2 and PA15 are connected to the ST-Link Virtual Com Port (VCP)
+	UART_TX_PIN = PA2
+	UART_RX_PIN = PA15
+)
+
+// I2C pins
+const (
+	// PB6 and PB7 are mapped to CN4 pin 7 and CN4 pin 8 respectively with the
+	// default solder bridge settings
+	I2C0_SCL_PIN = PB6
+	I2C0_SDA_PIN = PB7
+)
+
+var (
+	// USART2 is the hardware serial port connected to the onboard ST-LINK
+	// debugger to be exposed as virtual COM port over USB on Nucleo boards.
+	// Both UART0 and UART1 refer to USART2.
+	UART0 = UART{
+		Buffer:            NewRingBuffer(),
+		Bus:               stm32.USART2,
+		TxAltFuncSelector: 7,
+		RxAltFuncSelector: 3,
+	}
+	UART1 = &UART0
+)
+
+func init() {
+	UART0.Interrupt = interrupt.New(stm32.IRQ_USART2, UART0.handleInterrupt)
+}