tinygo-org/tinygo
1
0
Fork 0
mirror of https://github.com/tinygo-org/tinygo.git synced 2026-08-07 12:33:42 +00:00
Code Issues Packages Projects Releases 6 Wiki Activity

device: update SVD files

Browse Source 
This updates lib/cmsis-svd, pulling in the updates to the Espressif SVD
files here:
https://github.com/cmsis-svd/cmsis-svd-data/pull/3

This is needed for wifi/BLE support on the ESP32-C3 (the older SVD files
were missing some necessary interrupts).
This commit is contained in:
Ayke van Laethem
2024-01-30 16:45:24 +01:00
committed by Ron Evans
parent d04b07fa8b
commit 5557e97888
6 changed files with 73 additions and 73 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/machine/machine_esp32c3.go
+7 -7
View File
@@ -192,7 +192,7 @@ func (p Pin) SetInterrupt(change PinChange, callback func(Pin)) (err error) {
if callback == nil {
// Disable this pin interrupt
p.pin().ClearBits(esp.GPIO_PIN_PIN_INT_TYPE_Msk | esp.GPIO_PIN_PIN_INT_ENA_Msk)
p.pin().ClearBits(esp.GPIO_PIN_INT_TYPE_Msk | esp.GPIO_PIN_INT_ENA_Msk)
if pinCallbacks[p] != nil {
pinCallbacks[p] = nil
@@ -216,8 +216,8 @@ func (p Pin) SetInterrupt(change PinChange, callback func(Pin)) (err error) {
}
p.pin().Set(
(p.pin().Get() & ^uint32(esp.GPIO_PIN_PIN_INT_TYPE_Msk|esp.GPIO_PIN_PIN_INT_ENA_Msk)) |
uint32(change)<<esp.GPIO_PIN_PIN_INT_TYPE_Pos | uint32(1)<<esp.GPIO_PIN_PIN_INT_ENA_Pos)
(p.pin().Get() & ^uint32(esp.GPIO_PIN_INT_TYPE_Msk|esp.GPIO_PIN_INT_ENA_Msk)) |
uint32(change)<<esp.GPIO_PIN_INT_TYPE_Pos | uint32(1)<<esp.GPIO_PIN_INT_ENA_Pos)
return nil
}
@@ -395,7 +395,7 @@ func initUARTClock(bus *esp.UART_Type, regs registerSet) {
// synchronize core register
bus.SetID_REG_UPDATE(0)
// enable RTC clock
esp.RTC_CNTL.SetRTC_CLK_CONF_DIG_CLK8M_EN(1)
esp.RTC_CNTL.SetCLK_CONF_DIG_CLK8M_EN(1)
// wait for Core Clock to ready for configuration
for bus.GetID_REG_UPDATE() > 0 {
riscv.Asm("nop")
@@ -419,7 +419,7 @@ func (uart *UART) setupPins(config UARTConfig, regs registerSet) {
// link TX with GPIO signal X (technical reference manual 5.10) (this is not interrupt signal!)
config.TX.outFunc().Set(regs.gpioMatrixSignal)
// link RX with GPIO signal X and route signals via GPIO matrix (GPIO_SIGn_IN_SEL 0x40)
inFunc(regs.gpioMatrixSignal).Set(esp.GPIO_FUNC_IN_SEL_CFG_SIG_IN_SEL | uint32(config.RX))
inFunc(regs.gpioMatrixSignal).Set(esp.GPIO_FUNC_IN_SEL_CFG_SEL | uint32(config.RX))
}
func (uart *UART) configureInterrupt(intrMapReg *volatile.Register32) { // Disable all UART interrupts
@@ -611,8 +611,8 @@ func GetRNG() (ret uint32, err error) {
initADCClock()
// ensure fast RTC clock is enabled
if esp.RTC_CNTL.GetRTC_CLK_CONF_DIG_CLK8M_EN() == 0 {
esp.RTC_CNTL.SetRTC_CLK_CONF_DIG_CLK8M_EN(1)
if esp.RTC_CNTL.GetCLK_CONF_DIG_CLK8M_EN() == 0 {
esp.RTC_CNTL.SetCLK_CONF_DIG_CLK8M_EN(1)
}
return esp.APB_CTRL.GetRND_DATA(), nil