0.29.0
---

* **general**
  - Go 1.21 support
  - use https for renesas submodule #3856
  - ci: rename release-double-zipped to something more useful
  - ci: update Node.js from version 14 to version 16
  - ci: switch GH actions builds to use Go 1.21 final release
  - docker: update clang to version 15
  - docker: use Go 1.21 for Docker dev container build
  - `main`: add target JSON file in `tinygo info` output
  - `main`: improve detection of filesystems
  - `main`: use `go env` instead of doing all detection manually
  - make: add make task to generate Renesas device wrappers
  - make: add task to check NodeJS version before running tests
  - add submodule for Renesas SVD file mirror repo
  - update to go-serial package v1.6.0
  - `testing`: add Testing function
  - `tools/gen-device-svd`: small changes needed for Renesas MCUs
* **compiler**
  - `builder`: update message for max supported Go version
  - `compiler,reflect`: NumMethods reports exported methods only
  - `compiler`: add compiler-rt and wasm symbols to table
  - `compiler`: add compiler-rt to wasm.json
  - `compiler`: add min and max builtin support
  - `compiler`: implement clear builtin for maps
  - `compiler`: implement clear builtin for slices
  - `compiler`: improve panic message when a runtime call is unavailable
  - `compiler`: update .ll test output
  - `loader`: merge go.env file which is now required starting in Go 1.21 to correctly get required packages
* **standard library**
  - `os`: define ErrNoDeadline
  - `reflect`: Add FieldByNameFunc
  - `reflect`: add SetZero
  - `reflect`: fix iterating over maps with interface{} keys
  - `reflect`: implement Value.Grow
  - `reflect`: remove unecessary heap allocations
  - `reflect`: use .key() instead of a type assert
  - `sync`: add implementation from upstream Go for OnceFunc, OnceValue, and OnceValues
* **targets**
  - `machine`: UART refactor (#3832)
  - `machine/avr`: pin change interrupt
  - `machine/macropad_rp2040`: add machine.BUTTON
  - `machine/nrf`: add I2C timeout
  - `machine/nrf`: wait for stop condition after reading from the I2C bus
  - `machine/nRF52`: set SPI TX/RX lengths even data is empty. Fixes #3868 (#3877)
  - `machine/rp2040`: add missing suffix to CMD_READ_STATUS
  - `machine/rp2040`: add NoPin support
  - `machine/rp2040`: move flash related functions into separate file from C imports for correct  - LSP. Fixes #3852
  - `machine/rp2040`: wait for 1000 us after flash reset to avoid issues with busy USB bus
  - `machine/samd51,rp2040,nrf528xx,stm32`: implement watchdog
  - `machine/samd51`: fix i2cTimeout was decreasing due to cache activation
  - `machine/usb`: Add support for HID Keyboard LEDs
  - `machine/usb`: allow USB Endpoint settings to be changed externally
  - `machine/usb`: refactor endpoint configuration
  - `machine/usb`: remove usbDescriptorConfig
  - `machine/usb/hid,joystick`: fix hidreport (3) (#3802)
  - `machine/usb/hid`: add RxHandler interface
  - `machine/usb/hid`: rename Handler() to TxHandler()
  - `wasi`: allow zero inodes when reading directories
  - `wasm`: add support for GOOS=wasip1
  - `wasm`: fix functions exported through //export
  - `wasm`: remove i64 workaround, use BigInt instead
  - `example`: adjust time offset
  - `example`: simplify pininterrupt
* **boards**
  - `targets`: add AKIZUKI DENSHI AE-RP2040
  - `targets`: adding new uf2 target for PCA10056 (#3765)


0.28.0
---

* **general**
  - fix parallelism in the compiler on Windows by building LLVM with thread support
  - support qemu-user debugging
  - make target JSON msd-volume-name an array
  - print source location when a panic happens in -monitor
  - `test`: don't print `ok` for a successful compile-only
* **compiler**
  - `builder`: remove non-ThinLTO build mode
  - `builder`: fail earlier if Go is not available
  - `builder`: improve `-size=full` in a number of ways
  - `builder`: implement Nordic DFU file writer in Go
  - `cgo`: allow `LDFLAGS: --export=...`
  - `compiler`: support recursive slice types
  - `compiler`: zero struct padding during map operations
  - `compiler`: add llvm.ident metadata
  - `compiler`: remove `unsafe.Pointer(uintptr(v) + idx)` optimization (use `unsafe.Add` instead)
  - `compiler`: add debug info to `//go:embed` data structures for better `-size` output
  - `compiler`: add debug info to string constants
  - `compiler`: fix a minor race condition
  - `compiler`: emit correct alignment in debug info for global variables
  - `compiler`: correctly generate reflect data for local named types
  - `compiler`: add alloc attributes to `runtime.alloc`, reducing flash usage slightly
  - `compiler`: for interface maps, use the original named type if available
  - `compiler`: implement most math/bits functions as LLVM intrinsics
  - `compiler`: ensure all defers have been seen before creating rundefers
* **standard library**
  - `internal/task`: disallow blocking inside an interrupt
  - `machine`: add `CPUReset`
  - `machine/usb/hid`: add MediaKey support
  - `machine/usb/hid/joystick`: move joystick under HID
  - `machine/usb/hid/joystick`: allow joystick settings override
  - `machine/usb/hid/joystick`: handle case where we cannot find the correct HID descriptor
  - `machine/usb/hid/mouse`: add support for mouse back and forward
  - `machine/usb`: add ability to override default VID, PID, manufacturer name, and product name
  - `net`: added missing `TCPAddr` and `UDPAddr` implementations
  - `os`: add IsTimeout function
  - `os`: fix resource leak in `(*File).Close`
  - `os`: add `(*File).Sync`
  - `os`: implement `(*File).ReadDir` for wasi
  - `os`: implement `(*File).WriteAt`
  - `reflect`: make sure null bytes are supported in tags
  - `reflect`: refactor this package to enable many new features
  - `reflect`: add map type methods: `Elem` and `Key`
  - `reflect`: add map methods: `MapIndex`, `MapRange`/`MapIter`, `SetMapIndex`, `MakeMap`, `MapKeys`
  - `reflect`: add slice methods: `Append`, `MakeSlice`, `Slice`, `Slice3`, `Copy`, `Bytes`, `SetLen`
  - `reflect`: add misc methods: `Zero`, `Addr`, `UnsafeAddr`, `OverflowFloat`, `OverflowInt`, `OverflowUint`, `SetBytes`, `Convert`, `CanInt`, `CanFloat`, `CanComplex`, `Comparable`
  - `reflect`: add type methods: `String`, `PkgPath`, `FieldByName`, `FieldByIndex`, `NumMethod`
  - `reflect`: add stubs for `Type.Method`, `CanConvert`, `ArrayOf`, `StructOf`, `MapOf`
  - `reflect`: add stubs for channel select routines/types
  - `reflect`: allow nil rawType to call Kind()
  - `reflect`: ensure all ValueError panics have Kind fields
  - `reflect`: add support for named types
  - `reflect`: improve `Value.String()`
  - `reflect`: set `Index` and `PkgPath` field in `Type.Field`
  - `reflect`: `Type.AssignableTo`: you can assign anything to `interface{}`
  - `reflect`: add type check to `Value.Field`
  - `reflect`: let `TypeOf(nil)` return nil
  - `reflect`: move `StructField.Anonymous` field to match upstream location
  - `reflect`: add `UnsafePointer` for Func types
  - `reflect`: `MapIter.Next` needs to allocate new keys/values every time
  - `reflect`: fix `IsNil` for interfaces
  - `reflect`: fix `Type.Name` to return an empty string for non-named types
  - `reflect`: add `VisibleFields`
  - `reflect`: properly handle embedded structs
  - `reflect`: make sure `PointerTo` works for named types
  - `reflect`: `Set`: convert non-interface to interface
  - `reflect`: `Set`: fix direction of assignment check
  - `reflect`: support channel directions
  - `reflect`: print struct tags in Type.String()
  - `reflect`: properly handle read-only values
  - `runtime`: allow custom-gc SetFinalizer and clarify KeepAlive
  - `runtime`: implement KeepAlive using inline assembly
  - `runtime`: check for heap allocations inside interrupts
  - `runtime`: properly turn pointer into empty interface when hashing
  - `runtime`: improve map size hint usage
  - `runtime`: zero map key/value on deletion to so GC doesn't see them
  - `runtime`: print the address where a panic happened
  - `runtime/debug`: stub `SetGCPercent`, `BuildInfo.Settings`
  - `runtime/metrics`: add this package as a stub
  - `syscall`: `Stat_t` timespec fields are Atimespec on darwin
  - `syscall`: add `Timespec.Unix()` for wasi
  - `syscall`: add fsync using libc
  - `testing`: support -test.count
  - `testing`: make test output unbuffered when verbose
  - `testing`: add -test.skip
  - `testing`: move runtime.GC() call to runN to match upstream
  - `testing`: add -test.shuffle to order randomize test and benchmark order
* **targets**
  - `arm64`: fix register save/restore to include vector registers
  - `attiny1616`: add support for this chip
  - `cortexm`: refactor EnableInterrupts and DisableInterrupts to avoid `arm.AsmFull`
  - `cortexm`: enable functions in RAM for go & cgo
  - `cortexm`: convert SystemStack from `AsmFull` to C inline assembly
  - `cortexm`: fix crash due to wrong stack size offset
  - `nrf`: samd21, stm32: add flash API
  - `nrf`: fix memory issue in ADC read
  - `nrf`: new peripheral type for nrf528xx chips
  - `nrf`: implement target mode
  - `nrf`: improve ADC and add oversampling, longer sample time, and reference voltage
  - `rp2040`: change calling order for device enumeration fix to do first
  - `rp2040`: rtc delayed interrupt
  - `rp2040`: provide better errors for invalid pins on I2C and SPI
  - `rp2040`: change uart to allow for a single pin
  - `rp2040`: implement Flash interface
  - `rp2040`: remove SPI `DataBits` property
  - `rp2040`: unify all linker scripts using LDFLAGS
  - `rp2040`: remove SPI deadline for improved performance
  - `rp2040`: use 4MHz as default frequency for SPI
  - `rp2040`: implement target mode
  - `rp2040`: use DMA for send-only SPI transfers
  - `samd21`: rearrange switch case for get pin cfg
  - `samd21`: fix issue with WS2812 driver by making pin accesses faster
  - `samd51`: enable CMCC cache for greatly improved performance
  - `samd51`: remove extra BK0RDY clear
  - `samd51`: implement Flash interface
  - `samd51`: use correct SPI frequency
  - `samd51`: remove extra BK0RDY clear
  - `samd51`: fix ADC multisampling
  - `wasi`: allow users to set the `runtime_memhash_tsip` or `runtime_memhash_fnv` build tags
  - `wasi`: set `WASMTIME_BACKTRACE_DETAILS` when running in wasmtime.
  - `wasm`: implement the `//go:wasmimport` directive
* **boards**
  - `gameboy-advance`: switch to use register definitions in device/gba
  - `gameboy-advance`: rename display and make pointer receivers
  - `gopher-badge`: Added Gopher Badge support
  - `lorae5`: add needed definition for UART2
  - `lorae5`: correct mapping for I2C bus, add pin mapping to enable power
  - `pinetime`: update the target file (rename from pinetime-devkit0)
  - `qtpy`: fix bad pin assignment
  - `wioterminal`: fix pin definition of BCM13
  - `xiao`: Pins D4 & D5 are I2C1. Use pins D2 & D3 for I2C0.
  - `xiao`: add DefaultUART


0.27.0
---

* **general**
  - all: update musl
  - all: remove "acm:"` prefix for USB vid/pid pair
  - all: add support for LLVM 15
  - all: use DWARF version 4
  - all: add initial (incomplete) support for Go 1.20
  - all: add `-gc=custom` option
  - `main`: print ldflags including ThinLTO flags with -x
  - `main`: fix error message when a serial port can't be accessed
  - `main`: add `-timeout` flag to allow setting how long TinyGo will try looking for a MSD volume for flashing
  - `test`: print PASS on pass when running standalone test binaries
  - `test`: fix printing of benchmark output
  - `test`: print package name when compilation failed (not just when the test failed)
* **compiler**
  - refactor to support LLVM 15
  - `builder`: print compiler commands while building a library
  - `compiler`: fix stack overflow when creating recursive pointer types (fix for LLVM 15+ only)
  - `compiler`: allow map keys and values of ≥256 bytes
  - `cgo`: add support for `C.float` and `C.double`
  - `cgo`: support anonymous enums included in multiple Go files
  - `cgo`: add support for bitwise operators
  - `interp`: add support for constant icmp instructions
  - `transform`: fix memory corruption issues
* **standard library**
  - `machine/usb`: remove allocs in USB ISR
  - `machine/usb`: add `Port()` and deprecate `New()` to have the API better match the singleton that is actually being returned
  - `machine/usb`: change HID usage-maximum to 0xFF
  - `machine/usb`: add USB HID joystick support
  - `machine/usb`: change to not send before endpoint initialization
  - `net`: implement `Pipe`
  - `os`: add stub for `os.Chtimes`
  - `reflect`: stub out `Type.FieldByIndex`
  - `reflect`: add `Value.IsZero` method
  - `reflect`: fix bug in `.Field` method when the field fits in a pointer but the parent doesn't
  - `runtime`: switch some `panic()` calls in the gc to `runtimePanic()` for consistency
  - `runtime`: add xorshift-based fastrand64
  - `runtime`: fix alignment for arm64, arm, xtensa, riscv
  - `runtime`: implement precise GC
  - `runtime/debug`: stub `PrintStack`
  - `sync`: implement simple pooling in `sync.Pool`
  - `syscall`: stubbed `Setuid`, Exec and friends
  - `syscall`: add more stubs as needed for Go 1.20 support
  - `testing`: implement `t.Setenv`
  - `unsafe`: add support for Go 1.20 slice/string functions
* **targets**
  - `all`: do not set stack size per board
  - `all`: update picolibc to v1.7.9
  - `atsame5x`: fix CAN extendedID handling
  - `atsame5x`: reduce heap allocation
  - `avr`: drop GNU toolchain dependency
  - `avr`: fix .data initialization for binaries over 64kB
  - `avr`: support ThinLTO
  - `baremetal`: implements calloc
  - `darwin`: fix `syscall.Open` on darwin/arm64
  - `darwin`: fix error with `tinygo lldb`
  - `esp`: use LLVM Xtensa linker instead of Espressif toolchain
  - `esp`: use ThinLTO for Xtensa
  - `esp32c3`: add SPI support
  - `linux`: include musl `getpagesize` function in release
  - `nrf51`: add ADC implementation
  - `nrf52840`: add PDM support
  - `riscv`: add "target-abi" metadata flag
  - `rp2040`: remove mem allocation in GPIO ISR
  - `rp2040`: avoid allocating clock on heap
  - `rp2040`: add basic GPIO support for PIO
  - `rp2040`: fix USB interrupt issue
  - `rp2040`: fix RP2040-E5 USB errata
  - `stm32`: always set ADC pins to pullups floating
  - `stm32f1`, `stm32f4`: fix ADC by clearing the correct bit for rank after each read
  - `stm32wl`: Fix incomplete RNG initialisation
  - `stm32wlx`: change order for init so clock speeds are set before peripheral start
  - `wasi`: makes wasmtime "run" explicit
  - `wasm`: fix GC scanning of allocas
  - `wasm`: allow custom malloc implementation
  - `wasm`: remove `-wasm-abi=` flag (use `-target` instead)
  - `wasm`: fix scanning of the stack
  - `wasm`: fix panic when allocating 0 bytes using malloc
  - `wasm`: always run wasm-opt even with `-scheduler=none`
  - `wasm`: avoid miscompile with ThinLTO
  - `wasm`: allow the emulator to expand `{tmpDir}`
  - `wasm`: support ThinLTO
  - `windows`: update mingw-w64 version to avoid linker warning
  - `windows`: add ARM64 support
* **boards**
  - Add Waveshare RP2040 Zero
  - Add Arduino Leonardo support
  - Add Adafruit KB2040
  - Add Adafruit Feather M0 Express
  - Add Makerfabs ESP32C3SPI35 TFT Touchscreen board
  - Add Espressif ESP32-C3-DevKit-RUST-1 board
  - `lgt92`: fix OpenOCD configuration
  - `xiao-rp2040`: fix D9 and D10 constants
  - `xiao-rp2040`: add pin definitions

0.26.0
---

* **general**
  - remove support for LLVM 13
  - remove calls to deprecated ioutil package
  - move from `os.IsFoo` to `errors.Is(err, ErrFoo)`
  - fix for builds using an Android host
  - make interp timeout configurable from command line
  - ignore ports with VID/PID if there is no candidates
  - drop support for Go 1.16 and Go 1.17
  - update serial package to v1.3.5 for latest bugfixes
  - remove GOARM from `tinygo info`
  - add flag for setting the goroutine stack size
  - add serial port monitoring functionality
* **compiler**
  - `cgo`: implement support for static functions
  - `cgo`: fix panic when FuncType.Results is nil
  - `compiler`: add aliases for `edwards25519/field.feMul` and `field.feSquare`
  - `compiler`: fix incorrect DWARF type in some generic parameters
  - `compiler`: use LLVM math builtins everywhere
  - `compiler`: replace some math operation bodies with LLVM intrinsics
  - `compiler`: replace math aliases with intrinsics
  - `compiler`: fix `unsafe.Sizeof` for chan and map values
  - `compileopts`: use tags parser from buildutil
  - `compileopts`: use backticks for regexp to avoid extra escapes
  - `compileopts`: fail fast on duplicate values in target field slices
  - `compileopts`: fix windows/arm target triple
  - `compileopts`: improve error handling when loading target/*.json
  - `compileopts`: add support for stlink-dap programmer
  - `compileopts`: do not complain about `-no-debug` on MacOS
  - `goenv`: support `GOOS=android`
  - `interp`: fix reading from external global
  - `loader`: fix link error for `crypto/internal/boring/sig.StandardCrypto`
* **standard library**
  - rename assembly files to .S extension
  - `machine`: add PWM peripheral comments to pins
  - `machine`: improve UARTParity slightly
  - `machine`: do not export DFU_MAGIC_* constants on nrf52840
  - `machine`: rename `PinInputPullUp`/`PinInputPullDown`
  - `machine`: add `KHz`, `MHz`, `GHz` constants, deprecate `TWI_FREQ_*` constants
  - `machine`: remove level triggered pin interrupts
  - `machine`: do not expose `RESET_MAGIC_VALUE`
  - `machine`: use `NoPin` constant where appropriate (instead of `0` for example)
  - `net`: sync net.go with Go 1.18 stdlib
  - `os`: add `SyscallError.Timeout`
  - `os`: add `ErrProcessDone` error
  - `reflect`: implement `CanInterface` and fix string `Index`
  - `runtime`: make `MemStats` available to leaking collector
  - `runtime`: add `MemStats.TotalAlloc`
  - `runtime`: add `MemStats.Mallocs` and `Frees`
  - `runtime`: add support for `time.NewTimer` and `time.NewTicker`
  - `runtime`: implement `resetTimer`
  - `runtime`: ensure some headroom for the GC to run
  - `runtime`: make gc and scheduler asserts settable with build tags
  - `runtime/pprof`: add `WriteHeapProfile`
  - `runtime/pprof`: `runtime/trace`: stub some additional functions
  - `sync`: implement `Map.LoadAndDelete`
  - `syscall`: group WASI consts by purpose
  - `syscall`: add WASI `{D,R}SYNC`, `NONBLOCK` FD flags
  - `syscall`: add ENOTCONN on darwin
  - `testing`: add support for -benchmem
* **targets**
  - remove USB vid/pid pair of bootloader
  - `esp32c3`: remove unused `UARTStopBits` constants
  - `nrf`: implement `GetRNG` function
  - `nrf`: `rp2040`: add `machine.ReadTemperature`
  - `nrf52`: cleanup s140v6 and s140v7 uf2 targets
  - `rp2040`: implement semi-random RNG based on ROSC based on pico-sdk
  - `wasm`: add summary of wasm examples and fix callback bug
  - `wasm`: do not allow undefined symbols (`--allow-undefined`)
  - `wasm`: make sure buffers returned by `malloc` are kept until `free` is called
  - `windows`: save and restore xmm registers when switching goroutines
* **boards**
  - add Pimoroni's Tufty2040
  - add XIAO ESP32C3
  - add Adafruit QT2040
  - add Adafruit QT Py RP2040
  - `esp32c3-12f`: `matrixportal-m4`: `p1am-100`: remove duplicate build tags
  - `hifive1-qemu`: remove this emulated board
  - `wioterminal`: add UART3 for RTL8720DN
  - `xiao-ble`: fix usbpid


0.25.0
---

* **command line**
  - change to ignore PortReset failures
* **compiler**
  - `compiler`: darwin/arm64 is aarch64, not arm
  - `compiler`: don't clobber X18 and FP registers on darwin/arm64
  - `compiler`: fix issue with methods on generic structs
  - `compiler`: do not try to build generic functions
  - `compiler`: fix type names for generic named structs
  - `compiler`: fix multiple defined function issue for generic functions
  - `compiler`: implement `unsafe.Alignof` and `unsafe.Sizeof` for generic code
* **standard library**
  - `machine`: add DTR and RTS to Serialer interface
  - `machine`: reorder pin definitions to improve pin list on tinygo.org
  - `machine/usb`: add support for MIDI
  - `machine/usb`: adjust buffer alignment (samd21, samd51, nrf52840)
  - `machine/usb/midi`: add `NoteOn`, `NoteOff`, and `SendCC` methods
  - `machine/usb/midi`: add definition of MIDI note number
  - `runtime`: add benchmarks for memhash
  - `runtime`: add support for printing slices via print/println
* **targets**
  - `avr`: fix some apparent mistake in atmega1280/atmega2560 pin constants
  - `esp32`: provide hardware pin constants
  - `esp32`: fix WDT reset on the MCH2022 badge
  - `esp32`: optimize SPI transmit
  - `esp32c3`: provide hardware pin constants
  - `esp8266`: provide hardware pin constants like `GPIO2`
  - `nrf51`: define and use `P0_xx` constants
  - `nrf52840`, `samd21`, `samd51`: unify bootloader entry process
  - `nrf52840`, `samd21`, `samd51`: change usbSetup and sendZlp to public
  - `nrf52840`, `samd21`, `samd51`: refactor handleStandardSetup and initEndpoint
  - `nrf52840`, `samd21`, `samd51`: improve usb-device initialization
  - `nrf52840`, `samd21`, `samd51`: move usbcdc to machine/usb/cdc
  - `rp2040`: add usb serial vendor/product ID
  - `rp2040`: add support for usb
  - `rp2040`: change default for serial to usb
  - `rp2040`: add support for `machine.EnterBootloader`
  - `rp2040`: turn off pullup/down when input type is not specified
  - `rp2040`: make picoprobe default openocd interface
  - `samd51`: add support for `DAC1`
  - `samd51`: improve TRNG
  - `wasm`: stub `runtime.buffered`, `runtime.getchar`
  - `wasi`: make leveldb runtime hash the default
* **boards**
  - add Challenger RP2040 LoRa
  - add MCH2022 badge
  - add XIAO RP2040
  - `clue`: remove pins `D21`..`D28`
  - `feather-rp2040`, `macropad-rp2040`: fix qspi-flash settings
  - `xiao-ble`: add support for flash-1200-bps-reset
  - `gopherbot`, `gopherbot2`: add these aliases to simplify for newer users


0.24.0
---

* **command line**
  - remove support for go 1.15
  - remove support for LLVM 11 and LLVM 12
  - add initial Go 1.19 beta support
  - `test`: fix package/... syntax
* **compiler**
  - add support for the embed package
  - `builder`: improve error message for "command not found"
  - `builder`: add support for ThinLTO on MacOS and Windows
  - `builder`: free LLVM objects after use, to reduce memory leaking
  - `builder`: improve `-no-debug` error messages
  - `cgo`: be more strict: CGo now requires every Go file to import the headers it needs
  - `compiler`: alignof(func) is 1 pointer, not 2
  - `compiler`: add support for type parameters (aka generics)
  - `compiler`: implement `recover()` built-in function
  - `compiler`: support atomic, volatile, and LLVM memcpy-like functions in defer
  - `compiler`: drop support for macos syscalls via inline assembly
  - `interp`: do not try to interpret past task.Pause()
  - `interp`: fix some buggy localValue handling
  - `interp`: do not unroll loops
  - `transform`: fix MakeGCStackSlots that caused a possible GC bug on WebAssembly
* **standard library**
  - `os`: enable os.Stdin for baremetal target
  - `reflect`: add `Value.UnsafePointer` method
  - `runtime`: scan GC globals conservatively on Windows, MacOS, Linux and Nintendo Switch
  - `runtime`: add per-map hash seeds
  - `runtime`: handle nil map write panics
  - `runtime`: add stronger hash functions
  - `syscall`: implement `Getpagesize`
* **targets**
  - `atmega2560`: support UART1-3 + example for uart
  - `avr`: use compiler-rt for improved float64 support
  - `avr`: simplify timer-based time
  - `avr`: fix race condition in stack write
  - `darwin`: add support for `GOARCH=arm64` (aka Apple Silicon)
  - `darwin`: support `-size=short` and `-size=full` flag
  - `rp2040`: replace sleep 'busy loop' with timer alarm
  - `rp2040`: align api for `PortMaskSet`, `PortMaskClear`
  - `rp2040`: fix GPIO interrupts
  - `samd21`, `samd51`, `nrf52840`: add support for USBHID (keyboard / mouse)
  - `wasm`: update wasi-libc version
  - `wasm`: use newer WebAssembly features
* **boards**
  - add Badger 2040
  - `matrixportal-m4`: attach USB DP to the correct pin
  - `teensy40`: add I2C support
  - `wioterminal`: fix I2C definition


0.23.0
---

* **command line**
  - add `-work` flag
  - add Go 1.18 support
  - add LLVM 14 support
  - `run`: add support for command-line parameters
  - `build`: calculate default output path if `-o` is not specified
  - `build`: add JSON output
  - `test`: support multiple test binaries with `-c`
  - `test`: support flags like `-v` on all targets (including emulated firmware)
* **compiler**
  - add support for ThinLTO
  - use compiler-rt from LLVM
  - `builder`: prefer GNU build ID over Go build ID for caching
  - `builder`: add support for cross compiling to Darwin
  - `builder`: support machine outlining pass in stacksize calculation
  - `builder`: disable asynchronous unwind tables
  - `compileopts`: fix emulator configuration on non-amd64 Linux architectures
  - `compiler`: move allocations > 256  bytes to the heap
  - `compiler`: fix incorrect `unsafe.Alignof` on some 32-bit architectures
  - `compiler`: accept alias for slice `cap` builtin
  - `compiler`: allow slices of empty structs
  - `compiler`: fix difference in aliases in interface methods
  - `compiler`: make `RawSyscall` an alias for `Syscall`
  - `compiler`: remove support for memory references in `AsmFull`
  - `loader`: only add Clang header path for CGo
  - `transform`: fix poison value in heap-to-stack transform
* **standard library**
  - `internal/fuzz`: add this package as a shim
  - `os`: implement readdir for darwin and linux
  - `os`: add `DirFS`, which is used by many programs to access readdir.
  - `os`: isWine: be compatible with older versions of wine, too
  - `os`: implement `RemoveAll`
  - `os`: Use a `uintptr` for `NewFile`
  - `os`: add stubs for `exec.ExitError` and `ProcessState.ExitCode`
  - `os`: export correct values for `DevNull` for each OS
  - `os`: improve support for `Signal` by fixing various bugs
  - `os`: implement `File.Fd` method
  - `os`: implement `UserHomeDir`
  - `os`: add `exec.ProcessState` stub
  - `os`: implement `Pipe` for darwin
  - `os`: define stub `ErrDeadlineExceeded`
  - `reflect`: add stubs for more missing methods
  - `reflect`: rename `reflect.Ptr` to `reflect.Pointer`
  - `reflect`: add `Value.FieldByIndexErr` stub
  - `runtime`: fix various small GC bugs
  - `runtime`: use memzero for leaking collector instead of manually zeroing objects
  - `runtime`: implement `memhash`
  - `runtime`: implement `fastrand`
  - `runtime`: add stub for `debug.ReadBuildInfo`
  - `runtime`: add stub for `NumCPU`
  - `runtime`: don't inline `runtime.alloc` with `-gc=leaking`
  - `runtime`: add `Version`
  - `runtime`: add stubs for `NumCgoCall` and `NumGoroutine`
  - `runtime`: stub {Lock,Unlock}OSThread on Windows
  - `runtime`: be able to deal with a very small heap
  - `syscall`: make `Environ` return a copy of the environment
  - `syscall`: implement getpagesize and munmap
  - `syscall`: `wasi`: define `MAP_SHARED` and `PROT_READ`
  - `syscall`: stub mmap(), munmap(), MAP_SHARED, PROT_READ, SIGBUS, etc. on nonhosted targets
  - `syscall`: darwin: more complete list of signals
  - `syscall`: `wasi`: more complete list of signals
  - `syscall`: stub `WaitStatus`
  - `syscall/js`: allow copyBytesTo(Go|JS) to use `Uint8ClampedArray`
  - `testing`: implement `TempDir`
  - `testing`: nudge type TB closer to upstream; should be a no-op change.
  - `testing`: on baremetal platforms, use simpler test matcher
* **targets**
  - `atsamd`: fix usbcdc initialization when `-serial=uart`
  - `atsamd51`: allow higher frequency when using SPI
  - `esp`: support CGo
  - `esp32c3`: add support for input pin
  - `esp32c3`: add support for GPIO interrupts
  - `esp32c3`: add support to receive UART data
  - `rp2040`: fix PWM bug at high frequency
  - `rp2040`: fix some minor I2C bugs
  - `rp2040`: fix incorrect inline assembly
  - `rp2040`: fix spurious i2c STOP during write+read transaction
  - `rp2040`: improve ADC support
  - `wasi`: remove `--export-dynamic` linker flag
  - `wasm`: remove heap allocator from wasi-libc
* **boards**
  - `circuitplay-bluefruit`: move pin mappings so board can be compiled for WASM use in Playground
  - `esp32-c3-12f`: add the ESP32-C3-12f Kit
  - `m5stamp-c3`: add pin setting of UART
  - `macropad-rp2040`: add the Adafruit MacroPad RP2040 board
  - `nano-33-ble`: typo in LPS22HB peripheral definition and documentation (#2579)
  - `teensy41`: add the Teensy 4.1 board
  - `teensy40`: add ADC support
  - `teensy40`: add SPI support
  - `thingplus-rp2040`: add the SparkFun Thing Plus RP2040 board
  - `wioterminal`: add DefaultUART
  - `wioterminal`: verify written data when flashing through OpenOCD
  - `xiao-ble`: add XIAO BLE nRF52840 support


0.22.0
---

* **command line**
  - add asyncify to scheduler flag help
  - support -run for tests
  - remove FreeBSD target support
  - add LLVM 12 and LLVM 13 support, use LLVM 13 by default
  - add support for ARM64 MacOS
  - improve help
  - check /run/media as well as /media on Linux for non-debian-based distros
  - `test`: set cmd.Dir even when running emulators
  - `info`: add JSON output using the `-json` flag
* **compiler**
  - `builder`: fix off-by-one in size calculation
  - `builder`: handle concurrent library header rename
  - `builder`: use flock to avoid double-compiles
  - `builder`: use build ID as cache key
  - `builder`: add -fno-stack-protector to musl build
  - `builder`: update clang header search path to look in /usr/lib
  - `builder`: explicitly disable unwind tables for ARM
  - `cgo`: add support for `C.CString` and related functions
  - `compiler`: fix ranging over maps with particular map types
  - `compiler`: add correct debug location to init instructions
  - `compiler`: fix emission of large object layouts
  - `compiler`: work around AVR atomics bugs
  - `compiler`: predeclare runtime.trackPointer
  - `interp`: work around AVR function pointers in globals
  - `interp`: run goroutine starts and checks at runtime
  - `interp`: always run atomic and volatile loads/stores at runtime
  - `interp`: bump timeout to 180 seconds
  - `interp`: handle type assertions on nil interfaces
  - `loader`: eliminate goroot cache inconsistency
  - `loader`: respect $GOROOT when running `go list`
  - `transform`: allocate the correct amount of bytes in an alloca
  - `transform`: remove switched func lowering
* **standard library**
  - `crypto/rand`: show error if platform has no rng
  - `device/*`: add `*_Msk` field for each bit field and avoid duplicates
  - `device/*`: provide Set/Get for each register field described in the SVD files
  - `internal/task`: swap stack chain when switching goroutines
  - `internal/task`: remove `-scheduler=coroutines`
  - `machine`: add `Device` string constant
  - `net`: add bare Interface implementation
  - `net`: add net.Buffers
  - `os`: stub out support for some features
  - `os`: obey TMPDIR on unix, TMP on Windows, etc
  - `os`: implement `ReadAt`, `Mkdir`, `Remove`, `Stat`, `Lstat`, `CreateTemp`, `MkdirAll`, `Chdir`, `Chmod`, `Clearenv`, `Unsetenv`, `Setenv`, `MkdirTemp`, `Rename`, `Seek`, `ExpandEnv`, `Symlink`, `Readlink`
  - `os`: implement `File.Stat`
  - `os`: fix `IsNotExist` on nonexistent path
  - `os`: fix opening files on WASI in read-only mode
  - `os`: work around lack of `syscall.seek` on 386 and arm
  - `reflect`: make sure indirect pointers are handled correctly
  - `runtime`: allow comparing interfaces
  - `runtime`: use LLVM intrinsic to read the stack pointer
  - `runtime`: strengthen hashmap hash function for structs and arrays
  - `runtime`: fix float/complex hashing
  - `runtime`: fix nil map dereference
  - `runtime`: add realloc implementation to GCs
  - `runtime`: handle negative sleep times
  - `runtime`: correct GC scan bounds
  - `runtime`: remove extalloc GC
  - `rumtime`: implement `__sync` libcalls as critical sections for most microcontrollers
  - `runtime`: add stubs for `Func.FileLine` and `Frame.PC`
  - `sync`: fix concurrent read-lock on write-locked RWMutex
  - `sync`: add a package doc
  - `sync`: add tests
  - `syscall`: add support for `Mmap` and `Mprotect`
  - `syscall`: fix array size for mmap slice creation
  - `syscall`: enable `Getwd` in wasi
  - `testing`: add a stub for `CoverMode`
  - `testing`: support -bench option to run benchmarks matching the given pattern.
  - `testing`: support b.SetBytes(); implement sub-benchmarks.
  - `testing`: replace spaces with underscores in test/benchmark names, as upstream does
  - `testing`: implement testing.Cleanup
  - `testing`: allow filtering subbenchmarks with the `-bench` flag
  - `testing`: implement `-benchtime` flag
  - `testing`: print duration
  - `testing`: allow filtering of subtests using `-run`
* **targets**
  - `all`: change LLVM features to match vanilla Clang
  - `avr`: use interrupt-based timer which is much more accurate
  - `nrf`: fix races in I2C
  - `samd51`: implement TRNG for randomness
  - `stm32`: pull-up on I2C lines
  - `stm32`: fix timeout for i2c comms
  - `stm32f4`, `stm32f103`: initial implementation for ADC
  - `stm32f4`, `stm32f7`, `stm32l0x2`, `stm32l4`, `stm32l5`, `stm32wl`: TRNG implementation in crypto/rand
  - `stm32wl`: add I2C support
  - `windows`: add support for the `-size=` flag
  - `wasm`: add support for `tinygo test`
  - `wasi`, `wasm`: raise default stack size to 16 KiB
* **boards**
  - add M5Stack
  - add lorae5 (stm32wle) support
  - add Generic Node Sensor Edition
  - add STM32F469 Discovery
  - add M5Stamp C3
  - add Blues Wireless Swan
  - `bluepill`: add definitions for ADC pins
  - `stm32f4disco`: add definitions for ADC pins
  - `stm32l552ze`: use supported stlink interface
  - `microbit-v2`: add some pin definitions


0.21.0
---

* **command line**
  - drop support for LLVM 10
  - `build`: drop support for LLVM targets in the -target flag
  - `build`: fix paths in error messages on Windows
  - `build`: add -p flag to set parallelism
  - `lldb`: implement `tinygo lldb` subcommand
  - `test`: use emulator exit code instead of parsing test output
  - `test`: pass testing arguments to wasmtime
* **compiler**
  - use -opt flag for optimization level in CFlags (-Os, etc)
  - `builder`: improve accuracy of the -size=full flag
  - `builder`: hardcode some more frame sizes for __aeabi_* functions
  - `builder`: add support for -size= flag for WebAssembly
  - `cgo`: fix line/column reporting in syntax error messages
  - `cgo`: support function definitions in CGo headers
  - `cgo`: implement rudimentary C array decaying
  - `cgo`: add support for stdio in picolibc and wasi-libc
  - `cgo`: run CGo parser per file, not per CGo fragment
  - `compiler`: fix unintentionally exported math functions
  - `compiler`: properly implement div and rem operations
  - `compiler`: add support for recursive function types
  - `compiler`: add support for the `go` keyword on interface methods
  - `compiler`: add minsize attribute for -Oz
  - `compiler`: add "target-cpu" and "target-features" attributes
  - `compiler`: fix indices into strings and arrays
  - `compiler`: fix string compare functions
  - `interp`: simplify some code to avoid some errors
  - `interp`: support recursive globals (like linked lists) in globals
  - `interp`: support constant globals
  - `interp`: fix reverting of extractvalue/insertvalue with multiple indices
  - `transform`: work around renamed return type after merging LLVM modules
* **standard library**
  - `internal/bytealg`: fix indexing error in Compare()
  - `machine`: support Pin.Get() function when the pin is configured as output
  - `net`, `syscall`: Reduce code duplication by switching to internal/itoa.
  - `os`: don't try to read executable path on baremetal
  - `os`: implement Getwd
  - `os`: add File.WriteString and File.WriteAt
  - `reflect`: fix type.Size() to account for struct padding
  - `reflect`: don't construct an interface-in-interface value
  - `reflect`: implement Value.Elem() for interface values
  - `reflect`: fix Value.Index() in a specific case
  - `reflect`: add support for DeepEqual
  - `runtime`: add another set of invalid unicode runes to encodeUTF8()
  - `runtime`: only initialize os.runtime_args when needed
  - `runtime`: only use CRLF on baremetal systems for println
  - `runtime/debug`: stub `debug.SetMaxStack`
  - `runtime/debug`: stub `debug.Stack`
  - `testing`: add a stub for t.Parallel()
  - `testing`: add support for -test.short flag
  - `testing`: stub B.ReportAllocs()
  - `testing`: add `testing.Verbose`
  - `testing`: stub `testing.AllocsPerRun`
* **targets**
  - fix gen-device-svd to handle 64-bit values
  - add CPU and Features property to all targets
  - match LLVM triple to the one Clang uses
  - `atsam`: simplify definition of SERCOM UART, I2C and SPI peripherals
  - `atsam`: move I2S0 to machine file
  - `esp32`: fix SPI configuration
  - `esp32c3`: add support for GDB debugging
  - `esp32c3`: add support for CPU interrupts
  - `esp32c3`: use tasks scheduler by default
  - `fe310`: increase CPU frequency from 16MHz to 320MHz
  - `fe310`: add support for bit banging drivers
  - `linux`: build static binaries using musl
  - `linux`: reduce binary size by calling `write` instead of `putchar`
  - `linux`: add support for GOARM
  - `riscv`: implement 32-bit atomic operations
  - `riscv`: align the heap to 16 bytes
  - `riscv`: switch to tasks-based scheduler
  - `rp2040`: add CPUFrequency()
  - `rp2040`: improve I2C baud rate configuration
  - `rp2040`: add pin interrupt API
  - `rp2040`: refactor PWM code and fix Period calculation
  - `stm32f103`: fix SPI
  - `stm32f103`: make SPI frequency selection more flexible
  - `qemu`: signal correct exit code to QEMU
  - `wasi`: run C/C++ constructors at startup
  - `wasm`: ensure heapptr is aligned
  - `wasm`: update wasi-libc dependency
  - `wasm`: wasi: use asyncify
  - `wasm`: support `-scheduler=none`
  - `windows`: add support for Windows (amd64 only for now)
* **boards**
  - `feather-stm32f405`, `feather-rp2040`: add I2C pin names
  - `m5stack-core2`: add M5Stack Core2
  - `nano-33-ble`: SoftDevice s140v7 support
  - `nano-33-ble`: add constants for more on-board pins


0.20.0
---

* **command line**
  - add support for Go 1.17
  - improve Go version detection
  - add support for the Black Magic Probe (BMP)
  - add a flag for creating cpu profiles
* **compiler**
  - `builder:` list libraries at the end of the linker command
  - `builder:` strip debug information at link time instead of at compile time
  - `builder:` add missing error check for `ioutil.TempFile()`
  - `builder:` simplify running of jobs
  - `compiler:` move LLVM math builtin support into the compiler
  - `compiler:` move math aliases from the runtime to the compiler
  - `compiler:` add aliases for many hashing packages
  - `compiler:` add `*ssa.MakeSlice` bounds tests
  - `compiler:` fix max possible slice
  - `compiler:` add support for new language features of Go 1.17
  - `compiler:` fix equally named structs in different scopes
  - `compiler:` avoid zero-sized alloca in channel operations
  - `interp:` don't ignore array indices for untyped objects
  - `interp:` keep reverted package initializers in order
  - `interp:` fix bug in compiler-time/run-time package initializers
  - `loader:` fix panic in CGo files with syntax errors
  - `transform:` improve GC stack slot pass to work around a bug
* **standard library**
  - `crypto/rand`: switch to `arc4random_buf`
  - `math:` fix `math.Max` and `math.Min`
  - `math/big`: fix undefined symbols error
  - `net:` add MAC address implementation
  - `os:` implement `os.Executable`
  - `os:` add `SEEK_SET`, `SEEK_CUR`, and `SEEK_END`
  - `reflect:` add StructField.IsExported method
  - `runtime:` reset heapptr to heapStart after preinit()
  - `runtime:` add `subsections_via_symbols` to assembly files on darwin
  - `testing:` add subset implementation of Benchmark
  - `testing:` test testing package using `tinygo test`
  - `testing:` add support for the `-test.v` flag
* **targets**
  - `386:` bump minimum requirement to the Pentium 4
  - `arm:` switch to Thumb instruction set on ARM
  - `atsamd:` fix copy-paste error for atsamd21/51 calibTrim block
  - `baremetal`,`wasm`: support command line params and environment variables
  - `cortexm:` fix stack overflow because of unaligned stacks
  - `esp32c3:` add support for the ESP32-C3 from Espressif
  - `nrf52840:` fix ram size
  - `nxpmk66f18:` fix a suspicious bitwise operation
  - `rp2040:` add SPI support
  - `rp2040:` add I2C support
  - `rp2040:` add PWM implementation
  - `rp2040:` add openocd configuration
  - `stm32:` add support for PortMask* functions for WS2812 support
  - `unix:` fix time base for time.Now()
  - `unix:` check for mmap error and act accordingly
  - `wasm:` override dlmalloc heap implementation from wasi-libc
  - `wasm:` align heap to 16 bytes
  - `wasm:` add support for the crypto/rand package
* **boards**
  - add `DefaultUART` to adafruit boards
  - `arduino-mkrwifi1010:` add board definition for Arduino MKR WiFi 1010
  - `arduino-mkrwifi1010:` fix pin definition of `NINA_RESETN`
  - `feather-nrf52:` fix pin definition of uart
  - `feather-rp2040:` add pin name definition
  - `gameboy-advance:` fix ROM header
  - `mdbt50qrx-uf2:` add Raytac MDBT50Q-RX Dongle with TinyUF2
  - `nano-rp2040:` define `NINA_SPI` and fix wifinina pins
  - `teensy40:` enable hardware UART reconfiguration, fix receive watermark interrupt


0.19.0
---

* **command line**
  - don't consider compile-only tests as failing
  - add -test flag for `tinygo list`
  - escape commands while printing them with the -x flag
  - make flash-command portable and safer to use
  - use `extended-remote` instead of `remote` in GDB
  - detect specific serial port IDs based on USB vid/pid
  - add a flag to the command line to select the serial implementation
* **compiler**
  - `cgo`: improve constant parser
  - `compiler`: support chained interrupt handlers
  - `compiler`: add support for running a builtin in a goroutine
  - `compiler`: do not emit nil checks for loading closure variables
  - `compiler`: skip context parameter when starting regular goroutine
  - `compiler`: refactor method names
  - `compiler`: add function and global section pragmas
  - `compiler`: implement `syscall.rawSyscallNoError` in inline assembly
  - `interp`: ignore inline assembly in markExternal
  - `interp`: fix a bug in pointer cast workaround
  - `loader`: fix testing a main package
* **standard library**
  - `crypto/rand`: replace this package with a TinyGo version
  - `machine`: make USBCDC global a pointer
  - `machine`: make UART objects pointer receivers
  - `machine`: define Serial as the default output
  - `net`: add initial support for net.IP
  - `net`: add more net compatibility
  - `os`: add stub for os.ReadDir
  - `os`: add FileMode constants from Go 1.16
  - `os`: add stubs required for net/http
  - `os`: implement process related functions
  - `reflect`: implement AppendSlice
  - `reflect`: add stubs required for net/http
  - `runtime`: make task.Data a 64-bit integer to avoid overflow
  - `runtime`: expose memory stats
  - `sync`: implement NewCond
  - `syscall`: fix int type in libc version
* **targets**
  - `cortexm`: do not disable interrupts on abort
  - `cortexm`: bump default stack size to 2048 bytes
  - `nrf`: avoid heap allocation in waitForEvent
  - `nrf`: don't trigger a heap allocation in SPI.Transfer
  - `nrf52840`: add support for flashing with the BOSSA tool
  - `rp2040`: add support for GPIO input
  - `rp2040`: add basic support for ADC
  - `rp2040`: gpio and adc pin definitions
  - `rp2040`: implement UART
  - `rp2040`: patch elf to checksum 2nd stage boot
  - `stm32`: add PWM for most chips
  - `stm32`: add support for pin interrupts
  - `stm32f103`: add support for PinInputPullup / PinInputPulldown
  - `wasi`: remove wasm build tag
* **boards**
  - `feather-rp2040`: add support for this board
  - `feather-nrf52840-sense`: add board definition for this board
  - `pca10059`: support flashing from Windows
  - `nano-rp2040`: add this board
  - `nano-33-ble`: add support for this board
  - `pico`: add the Raspberry Pi Pico board with the new RP2040 chip
  - `qtpy`: add pin for neopixels
  - all: add definition for ws2812 for supported boards


0.18.0
---

* **command line**
  - drop support for Go 1.11 and 1.12
  - throw an error when no target is specified on Windows
  - improve error messages in `getDefaultPort()`, support for multiple ports
  - remove `-cflags` and `-ldflags` flags
  - implement `-ldflags="-X ..."`
  - add `-print-allocs` flag that lets you print all heap allocations
  - openocd commands in tinygo command line
  - add `-llvm-features` parameter
  - match `go test` output
  - discover USB ports only, this will ignore f.ex. bluetooth
  - use physicmal path instead of cached GOROOT in function getGoroot
  - add goroot for snap installs
* **compiler**
  - `builder`: add support for `-opt=0`
  - `builder`, `compiler`: compile and cache packages in parallel
  - `builder`: run interp per package
  - `builder`: cache C and assembly file outputs
  - `builder`: add support for `-x` flag to print commands
  - `builder`: add optsize attribute while building the package
  - `builder`: run function passes per package
  - `builder`: hard code Clang compiler
  - `compiler`: do not use `llvm.GlobalContext()`
  - `compiler`: remove SimpleDCE pass
  - `compiler`: do not emit nil checks for `*ssa.Alloc` instructions
  - `compiler`: merge `runtime.typecodeID` and runtime.typeInInterface
  - `compiler`: do not check for impossible type asserts
  - `compiler`: fix use of global context: `llvm.Int32Type()`
  - `compiler`: add interface IR test
  - `compiler`: fix lack of method name in interface matching
  - `compiler`: fix "fragment covers entire variable" bug
  - `compiler`: optimize string literals and globals
  - `compiler`: decouple func lowering from interface type codes
  - `compiler`: add function attributes to some runtime calls
  - `compiler`: improve position information in error messages
  - `cgo`: add support for CFLAGS in .c files
  - `interp`: support GEP on fixed (MMIO) addresses
  - `interp`: handle `(reflect.Type).Elem()`
  - `interp`: add support for runtime.interfaceMethod
  - `interp`: make toLLVMValue return an error instead of panicking
  - `interp`: add support for switch statement
  - `interp`: fix phi instruction
  - `interp`: remove map support
  - `interp`: support extractvalue/insertvalue with multiple operands
  - `transform`: optimize string comparisons against ""
  - `transform`: optimize `reflect.Type` `Implements()` method
  - `transform`: fix bug in interface lowering when signatures are renamed
  - `transform`: don't rely on struct name of `runtime.typecodeID`
  - `transform`: use IPSCCP pass instead of the constant propagation pass
  - `transform`: fix func lowering assertion failure
  - `transform`: do not lower zero-sized alloc to alloca
  - `transform`: split interface and reflect lowering
* **standard library**
  - `runtime`: add dummy debug package
  - `machine`: fix data shift/mask in newUSBSetup
  - `machine`: make `machine.I2C0` and similar objects pointers
  - `machine`: unify usbcdc code
  - `machine`: refactor PWM support
  - `machine`: avoid heap allocations in USB code
  - `reflect`: let `reflect.Type` be of interface type
  - `reflect`: implement a number of stub functions
  - `reflect`: check for access in the `Interface` method call
  - `reflect`: fix `AssignableTo` and `Implements` methods
  - `reflect`: implement `Value.CanAddr`
  - `reflect`: implement `Sizeof` and `Alignof` for func values
  - `reflect`: implement `New` function
  - `runtime`: implement command line arguments in hosted environments
  - `runtime`: implement environment variables for Linux
  - `runtime`: improve timers on nrf, and samd chips
* **targets**
  - all: use -Qunused-arguments only for assembly files
  - `atmega1280`: add PWM support
  - `attiny`: remove dummy UART
  - `atsamd21`: improve SPI
  - `atsamd51`: fix PWM support in atsamd51p20
  - `atsamd5x`: improve SPI
  - `atsamd51`, `atsame5x`: unify samd51 and same5x
  - `atsamd51`, `atsamd21`: fix `ADC.Get()` value at 8bit and 10bit
  - `atsame5x`: add support for CAN
  - `avr`: remove I2C stubs from attiny support
  - `cortexm`: check for `arm-none-eabi-gdb` and `gdb-multiarch` commands
  - `cortexm`: add `__isr_vector` symbol
  - `cortexm`: disable FPU on Cortex-M4
  - `cortexm`: clean up Cortex-M target files
  - `fe310`: fix SPI read
  - `gameboy-advance`: Fix RGBA color interpretation
  - `nrf52833`: add PWM support
  - `stm32l0`: use unified UART logic
  - `stm32`: move f103 (bluepill) to common i2c code
  - `stm32`: separate altfunc selection for UART Tx/Rx
  - `stm32`: i2c implementation for F7, L5 and L4 MCUs
  - `stm32`: make SPI CLK fast to fix data issue
  - `stm32`: support SPI on L4 series
  - `unix`: avoid possible heap allocation with `-opt=0`
  - `unix`: use conservative GC by default
  - `unix`: use the tasks scheduler instead of coroutines
  - `wasi`: upgrade WASI version to wasi_snapshot_preview1
  - `wasi`: darwin: support basic file io based on libc
  - `wasm`: only export explicitly exported functions
  - `wasm`: use WASI ABI for exit function
  - `wasm`: scan globals conservatively
* **boards**
  - `arduino-mega1280`: add support for the Arduino Mega 1280
  - `arduino-nano-new`: Add Arduino Nano w/ New Bootloader target
  - `atsame54-xpro`: add initial support this board
  - `feather-m4-can`: add initial support for this board
  - `grandcentral-m4`: add board support for Adafruit Grand Central M4 (SAMD51)
  - `lgt92`: update to new UART structure
  - `microbit`: remove LED constant
  - `microbit-v2`: add support for S113 SoftDevice
  - `nucleol432`: add support for this board
  - `nucleo-l031k6`: add this board
  - `pca10059`: initial support for this board
  - `qtpy`: fix msd-volume-name
  - `qtpy`: fix i2c setting
  - `teensy40`: move txBuffer allocation to UART declaration
  - `teensy40`: add UART0 as alias for UART1


0.17.0

---
* **command line**
  - switch to LLVM 11 for static builds
  - support gdb debugging with AVR
  - add support for additional openocd commands
  - add `-x` flag to print commands
  - use LLVM 11 by default when linking LLVM dynamically
  - update go-llvm to use LLVM 11 on macOS
  - bump go.bug.st/serial to version 1.1.2
  - do not build LLVM with libxml to work around a bugo on macOS
  - add support for Go 1.16
  - support gdb daemonization on Windows
  - remove support for LLVM 9, to fix CI
  - kill OpenOCD if it does not exit with a regular quit signal
  - support `-ocd-output` on Windows
* **compiler**
  - `builder`: parallelize most of the build
  - `builder`: remove unused cacheKey parameter
  - `builder`: add -mcpu flag while building libraries
  - `builder`: wait for running jobs to finish
  - `cgo`: add support for variadic functions
  - `compiler`: fix undefined behavior in wordpack
  - `compiler`: fix incorrect "exported function" panic
  - `compiler`: fix non-int integer constants (fixing a crash)
  - `compiler`: refactor and add tests
  - `compiler`: emit a nil check when slicing an array pointer
  - `compiler`: saturate float-to-int conversions
  - `compiler`: test float to int conversions and fix upper-bound calculation
  - `compiler`: support all kinds of deferred builtins
  - `compiler`: remove ir package
  - `compiler`: remove unnecessary main.main call workaround
  - `compiler`: move the setting of attributes to getFunction
  - `compiler`: create runtime types lazily when needed
  - `compiler`: move settings to a separate Config struct
  - `compiler`: work around an ARM backend bug in LLVM
  - `interp`: rewrite entire package
  - `interp`: fix alignment of untyped globals
  - `loader`: use name "main" for the main package
  - `loader`: support imports from vendor directories
  - `stacksize`: add support for DW_CFA_offset_extended
  - `transform`: show better error message in coroutines lowering
* **standard library**
  - `machine`: accept configuration struct for ADC parameters
  - `machine`: make I2C.Configure signature consistent
  - `reflect`: implement PtrTo
  - `runtime`: refactor to simplify stack switching
  - `runtime`: put metadata at the top end of the heap
* **targets**
  - `atsam`: add a length check to findPinPadMapping
  - `atsam`: improve USBCDC
  - `atsam`: avoid infinite loop when USBCDC is disconnected
  - `avr`: add SPI support for Atmega based chips
  - `avr`: use Clang for compiling C and assembly files
  - `esp32`: implement task based scheduler
  - `esp32`: enable the FPU
  - `esp8266`: implement task based scheduler
  - `esp`: add compiler-rt library
  - `esp`: add picolibc
  - `nrf`: refactor code a bit to reduce duplication
  - `nrf`: use SPIM peripheral instead of the legacy SPI peripheral
  - `nrf`: update nrfx submodule to latest commit
  - `nrf52840`: ensure that USB CDC interface is only initialized once
  - `nrf52840`: improve USBCDC
  - `stm32`: use stm32-rs SVDs which are of much higher quality
  - `stm32`: harmonization of UART logic
  - `stm32`: replace I2C addressable interface with simpler type
  - `stm32`: fix i2c and add stm32f407 i2c
  - `stm32`: revert change that adds support for channels in interrupts
  - `wasm`: implement a growable heap
  - `wasm`: fix typo in wasm_exec.js, syscall/js.valueLoadString()
  - `wasm`: Namespaced Wasm Imports so they don't conflict across modules, or reserved LLVM IR
  - `wasi`: support env variables based on libc
  - `wasi`: specify wasi-libc in a different way, to improve error message
* **boards**
  - `matrixportal-m4`: add support for board Adafruit Matrix Portal M4
  - `mkr1000`: add this board
  - `nucleo-f722ze`: add this board
  - `clue`: correct volume name and add alias for release version of Adafruit Clue board
  - `p1am-100`: add support for the P1AM-100 (similar to Arduino MKR)
  - `microbit-v2`: add initial support based on work done by @alankrantas thank you!
  - `lgt92`: support for STM32L0 MCUs and Dragino LGT92 device
  - `nicenano`: nice!nano board support
  - `circuitplay-bluefruit`: correct internal I2C pin mapping
  - `clue`: correct for lack of low frequency crystal
  - `digispark`: split off attiny85 target
  - `nucleo-l552ze`: implementation with CLOCK, LED, and UART
  - `nrf52840-mdk-usb-dongle`: add this board

0.16.0
---

* **command-line**
  - add initial support for LLVM 11
  - make lib64 clang include path check more robust
  - `build`: improve support for GOARCH=386 and add tests
  - `gdb`: add support for qemu-user targets
  - `test`: support non-host tests
  - `test`: add support for -c and -o flags
  - `test`: implement some benchmark stubs
* **compiler**
  - `builder`: improve detection of clang on Fedora
  - `compiler`: fix floating point comparison bugs
  - `compiler`: implement negate for complex numbers
  - `loader`: fix linkname in test binaries
  - `transform`: add missing return pointer restore for regular coroutine tail
    calls
* **standard library**
  - `machine`: switch default frequency to 4MHz
  - `machine`: clarify caller's responsibility in `SetInterrupt`
  - `os`: add `LookupEnv()` stub
  - `reflect`: implement `Swapper`
  - `runtime`: fix UTF-8 decoding
  - `runtime`: gc: use raw stack access whenever possible
  - `runtime`: use dedicated printfloat32
  - `runtime`: allow ranging over a nil map
  - `runtime`: avoid device/nxp dependency in HardFault handler
  - `testing`: implement dummy Helper method
  - `testing`: add Run method
* **targets**
  - `arm64`: add support for SVCall intrinsic
  - `atsamd51`: avoid panic when configuring SPI with SDI=NoPin
  - `avr`: properly support the `.rodata` section
  - `esp8266`: implement `Pin.Get` function
  - `nintendoswitch`: fix crash when printing long lines (> 120)
  - `nintendoswitch`: add env parser and removed unused stuff
  - `nrf`: add I2C error checking
  - `nrf`: give more flexibility in picking SPI speeds
  - `nrf`: fix nrf52832 flash size
  - `stm32f103`: support wakeups from interrupts
  - `stm32f405`: add SPI support
  - `stm32f405`: add I2C support
  - `wasi`: add support for this target
  - `wasi`: use 'generic' ABI by default
  - `wasi`: remove --no-threads flag from wasm-ld
  - `wasm`: add instanceof support for WebAssembly
  - `wasm`: use fixed length buffer for putchar
* **boards**
  - `d1mini`: add this ESP8266 based board
  - `esp32`: use board definitions instead of chip names
  - `qtpy`: add board definition for Adafruit QTPy
  - `teensy40`: add this board

0.15.0
---

* **command-line**
  - add cached GOROOT to info subcommand
  - embed git-hash in tinygo-dev executable
  - implement tinygo targets to list usable targets
  - use simpler file copy instead of file renaming to avoid issues on nrf52840 UF2 bootloaders
  - use ToSlash() to specify program path
  - support flashing esp32/esp8266 directly from tinygo
  - when flashing call PortReset only on other than openocd
* **compiler**
  - `compileopts`: add support for custom binary formats
  - `compiler`: improve display of goroutine wrappers
  - `interp`: don't panic in the Store method
  - `interp`: replace some panics with error messages
  - `interp`: show error line in first line of the traceback
  - `loader`: be more robust when creating the cached GOROOT
  - `loader`: rewrite/refactor much of the code to use go list directly
  - `loader`: use ioutil.TempDir to create a temporary directory
  - `stacksize`: deal with DW_CFA_advance_loc1
* **standard library**
  - `runtime`: use waitForEvents when appropriate
* **wasm**
  - `wasm`: Remove --no-threads from wasm-ld calls.
  - `wasm`: update wasi-libc dependency
* **targets**
  - `arduino-mega2560`: fix flashing on Windows
  - `arm`: automatically determine stack sizes
  - `arm64`: make dynamic loader structs and constants private
  - `avr`: configure emulator in board files
  - `cortexm`: fix stack size calculation with interrupts
  - `flash`: add openocd settings to atsamd21 / atsamd51
  - `flash`: add openocd settings to nrf5
  - `microbit`: reelboard: flash using OpenOCD when needed
  - `nintendoswitch`: Add dynamic loader for runtime loading PIE sections
  - `nintendoswitch`: fix import cycle on dynamic_arm64.go
  - `nintendoswitch`: Fix invalid memory read / write in print calls
  - `nintendoswitch`: simplified assembly code
  - `nintendoswitch`: support outputting .nro files directly
* **boards**
  - `arduino-zero`: Adding support for the Arduino Zero (#1365)
  - `atsamd2x`: fix BAUD value
  - `atsamd5x`: fix BAUD value
  - `bluepill`: Enable stm32's USART2 for the board and map it to UART1 tinygo's device
  - `device/atsamd51x`: add all remaining bitfield values for PCHCTRLm Mapping
  - `esp32`: add libgcc ROM functions to linker script
  - `esp32`: add SPI support
  - `esp32`: add support for basic GPIO
  - `esp32`: add support for the Espressif ESP32 chip
  - `esp32`: configure the I/O matrix for GPIO pins
  - `esp32`: export machine.PortMask* for bitbanging implementations
  - `esp8266`: add support for this chip
  - `machine/atsamd51x,runtime/atsamd51x`: fixes needed for full support for all PWM pins. Also adds some useful constants to clarify peripheral clock usage
  - `machine/itsybitsy-nrf52840`: add support for Adafruit Itsybitsy nrf52840 (#1243)
  - `machine/stm32f4`: refactor common code and add new build tag stm32f4 (#1332)
  - `nrf`: add SoftDevice support for the Circuit Playground Bluefruit
  - `nrf`: call sd_app_evt_wait when the SoftDevice is enabled
  - `nrf52840`: add build tags for SoftDevice support
  - `nrf52840`: use higher priority for USB-CDC code
  - `runtime/atsamd51x`: use PCHCTRL_GCLK_SERCOMX_SLOW for setting clocks on all SERCOM ports
  - `stm32f405`: add basic UART handler
  - `stm32f405`: add STM32F405 machine/runtime, and new board/target feather-stm32f405
* **build**
  - `all`: run test binaries in the correct directory
  - `build`: Fix arch release job
  - `ci`: run `tinygo test` for known-working packages
  - `ci`: set git-fetch-depth to 1
  - `docker`: fix the problem with the wasm build (#1357)
  - `Makefile`: check whether submodules have been downloaded in some common cases
* **docs**
  - add ESP32, ESP8266, and Adafruit Feather STM32F405 to list of supported boards

0.14.1
---
* **command-line**
  - support for Go 1.15
* **compiler**
  - loader:  work around Windows symlink limitation

0.14.0
---
* **command-line**
  - fix `getDefaultPort()` on non-English Windows locales
  - compileopts: improve error reporting of unsupported flags
  - fix test subcommand
  - use auto-retry to locate MSD for UF2 and HEX flashing
  - fix touchSerialPortAt1200bps on Windows
  - support package names with backslashes on Windows
* **compiler**
  - fix a few crashes due to named types
  - add support for atomic operations
  - move the channel blocked list onto the stack
  - fix -gc=none
  - fix named string to `[]byte` slice conversion
  - implement func value and builtin defers
  - add proper parameter names to runtime.initAll, to fix a panic
  - builder: fix picolibc include path
  - builder: use newer version of gohex
  - builder: try to determine stack size information at compile time
  - builder: remove -opt=0
  - interp: fix sync/atomic.Value load/store methods
  - loader: add Go module support
  - transform: fix debug information in func lowering pass
  - transform: do not special-case zero or one implementations of a method call
  - transform: introduce check for method calls on nil interfaces
  - transform: gc: track 0-index GEPs to fix miscompilation
* **cgo**
  - Add LDFlags support
* **standard library**
  - extend stdlib to allow import of more packages
  - replace master/slave terminology with appropriate alternatives (MOSI->SDO
    etc)
  - `internal/bytealg`: reimplement bytealg in pure Go
  - `internal/task`: fix nil panic in (*internal/task.Stack).Pop
  - `os`: add Args and stub it with mock data
  - `os`: implement virtual filesystem support
  - `reflect`: add Cap and Len support for map and chan
  - `runtime`: fix return address in scheduler on RISC-V
  - `runtime`: avoid recursion in printuint64 function
  - `runtime`: replace ReadRegister with AsmFull inline assembly
  - `runtime`: fix compilation errors when using gc.extalloc
  - `runtime`: add cap and len support for chans
  - `runtime`: refactor time handling (improving accuracy)
  - `runtime`: make channels work in interrupts
  - `runtime/interrupt`: add cross-chip disable/restore interrupt support
  - `sync`: implement `sync.Cond`
  - `sync`: add WaitGroup
* **targets**
  - `arm`: allow nesting in DisableInterrupts and EnableInterrupts
  - `arm`: make FPU configuration consistent
  - `arm`: do not mask fault handlers in critical sections
  - `atmega2560`: fix pin mapping for pins D2, D5 and the L port
  - `atsamd`: return an error when an incorrect PWM pin is used
  - `atsamd`: add support for pin change interrupts
  - `atsamd`: add DAC support
  - `atsamd21`: add more ADC pins
  - `atsamd51`: fix ROM / RAM size on atsamd51j20
  - `atsamd51`: add more pins
  - `atsamd51`: add more ADC pins
  - `atsamd51`: add pin change interrupt settings
  - `atsamd51`: extend pinPadMapping
  - `arduino-nano33`: use (U)SB flag to ensure that device can be found when
     not on default port
  - `arduino-nano33`: remove (d)ebug flag to reduce console noise when flashing
  - `avr`: use standard pin numbering
  - `avr`: unify GPIO pin/port code
  - `avr`: add support for PinInputPullup
  - `avr`: work around codegen bug in LLVM 10
  - `avr`: fix target triple
  - `fe310`: remove extra println left in by mistake
  - `feather-nrf52840`: add support for the Feather nRF52840
  - `maixbit`: add board definition and dummy runtime
  - `nintendoswitch`: Add experimental Nintendo Switch support without CRT
  - `nrf`: expose the RAM base address
  - `nrf`: add support for pin change interrupts
  - `nrf`: add microbit-s110v8 target
  - `nrf`: fix bug in SPI.Tx
  - `nrf`: support debugging the PCA10056
  - `pygamer`: add Adafruit PyGamer support
  - `riscv`: fix interrupt configuration bug
  - `riscv`: disable linker relaxations during gp init
  - `stm32f4disco`: add new target with ST-Link v2.1 debugger
  - `teensy36`: add Teensy 3.6 support
  - `wasm`: fix event handling
  - `wasm`: add --no-demangle linker option
  - `wioterminal`: add support for the Seeed Wio Terminal
  - `xiao`: add support for the Seeed XIAO

0.13.1
---
* **standard library**
  - `runtime`: do not put scheduler and GC code in the same section
  - `runtime`: copy stack scan assembly for GBA
* **boards**
  - `gameboy-advance`: always use ARM mode instead of Thumb mode


0.13.0
---
* **command line**
  - use `gdb-multiarch` for debugging Cortex-M chips
  - support `tinygo run` with simavr
  - support LLVM 10
  - support Go 1.14
  - retry 3 times when attempting to do a 1200-baud reset
* **compiler**
  - mark the `abort` function as noreturn
  - fix deferred calls to exported functions
  - add debug info for local variables
  - check for channel size limit
  - refactor coroutine lowering
  - add `dereferenceable_or_null` attribute to pointer parameters
  - do not perform nil checking when indexing slices and on `unsafe.Pointer`
  - remove `runtime.isnil` hack
  - use LLVM builtins for runtime `memcpy`/`memmove`/`memzero` functions
  - implement spec-compliant shifts on negative/overflow
  - support anonymous type asserts
  - track pointer result of string concatenation for GC
  - track PHI nodes for GC
  - add debug info to goroutine start wrappers
  - optimize comparing interface values against nil
  - fix miscompilation when deferring an interface call
  - builder: include picolibc for most baremetal targets
  - builder: run tools (clang, lld) as separate processes
  - builder: use `-fshort-enums` consistently
  - interp: add support for constant type asserts
  - interp: better support for interface operations
  - interp: include backtrace with error
  - transform: do not track const globals for GC
  - transform: replace panics with source locations
  - transform: fix error in interface lowering pass
  - transform: make coroutine lowering deterministic
  - transform: fix miscompilation in func lowering
* **cgo**
  - make `-I` and `-L` paths absolute
* **standard library**
  - `machine`: set the USB VID and PID to the manufacturer values
  - `machine`: correct USB CDC composite descriptors
  - `machine`: move `errors.New` calls to globals
  - `runtime`: support operations on nil maps
  - `runtime`: fix copy builtin return value on AVR
  - `runtime`: refactor goroutines
  - `runtime`: support `-scheduler=none` on most platforms
  - `runtime`: run package initialization in the main goroutine
  - `runtime`: export `malloc` / `free` for use from C
  - `runtime`: add garbage collector that uses an external allocator
  - `runtime`: scan callee-saved registers while marking the stack
  - `runtime`: remove recursion from conservative GC
  - `runtime`: fix blocking select on nil channel
  - `runtime/volatile`: include `ReplaceBits` method
  - `sync`: implement trivial `sync.Map`
* **targets**
  - `arm`: use `-fomit-frame-pointer`
  - `atmega1284`: support this chip for testing purposes
  - `atsamd51`: make QSPI available on all boards
  - `atsamd51`: add support for ADC1
  - `atsamd51`: use new interrupt registration in UART code
  - `attiny`: clean up pin definitions
  - `avr`: use the correct RAM start address
  - `avr`: pass the correct `-mmcu` flag to the linker
  - `avr`: add support for tasks scheduler (disabled by default)
  - `avr`: fix linker problem with overlapping program/data areas
  - `nrf`: fix typo in pin configuration options
  - `nrf`: add lib/nrfx/mdk to include dirs
  - `nrf52840`: implement USB-CDC
  - `riscv`: implement VirtIO target and add RISC-V integration test
  - `riscv`: add I2C support for the HiFive1 rev B board
  - `stm32`: refactor GPIO pin handling
  - `stm32`: refactor UART code
  - `stm32f4`: add SPI
  - `wasm`: support Go 1.14 (breaking previous versions)
  - `wasm`: support `syscall/js.CopyBytesToJS`
  - `wasm`: sync polyfills from Go 1.14.
* **boards**
  - `arduino-mega2560`: add the Arduino Mega 2560
  - `clue-alpha`: add the Adafruit CLUE Alpha
  - `gameboy-advance`: enable debugging with GDB
  - `particle-argon`: add the Particle Argon board
  - `particle-boron`: add the Particle Boron board
  - `particle-xenon`: add the Particle Xenon board
  - `reelboard`: add `reelboard-s140v7` SoftDevice target

0.12.0
---
* **command line**
  - add initial FreeBSD support
  - remove getting a serial port in gdb subcommand
  - add support for debugging through JLinkGDBServer
  - fix CGo when cross compiling
  - remove default port check for Digispark as micronucleus communicates directly using HID
  - differentiate between various serial/USB error messages
* **builder**
  - improve detection of Clang headers
* **compiler**
  - fix assertion on empty interface
  - don't crash when encountering `types.Invalid`
  - revise defer to use heap allocations when running a variable number of times
  - improve error messages for failed imports
  - improve "function redeclared" error
  - add globaldce pass to start of optimization pipeline
  - add support for debugging globals
  - implement RISC-V CSR operations as intrinsics
  - add support for CGO_ENABLED environment variable
  - do not emit debug info for extern globals (bugfix)
  - add support for interrupts
  - implement maps for arbitrary keys
  - interp: error location for "unknown GEP" error
  - wasm-abi: create temporary allocas in the entry block
* **cgo**
  - add support for symbols in `#define`
  - fix a bug in number tokenization
* **standard library**
  - `machine`: avoid bytes package in USB logic
  - `runtime`: fix external address declarations
  - `runtime`: provide implementation for `internal/bytealg.IndexByte`
* **targets**
  - `atsamd51`: fix volatile usage
  - `atsamd51`: fix ADC, updating to 12-bits precision
  - `atsamd51`: refactor SPI pin configuration to only look at pin numbers
  - `atsamd51`: switch UART to use new pin configuration
  - `atsamd51`: fix obvious bug in I2C code
  - `atsamd51`: use only the necessary UART interrupts
  - `atsamd51`: refactor I2C pin handling to auto-detect pin mode
  - `avr`: use a garbage collector
  - `fe310`: use CLINT peripheral for timekeeping
  - `fe310`: add support for PLIC interrupts
  - `fe310`: implement UART receive interrupts
  - `riscv`: support sleeping in QEMU
  - `riscv`: add bare-bones interrupt support
  - `riscv`: print exception PC and code
  - `wasm`: implement memcpy and memset
  - `wasm`: include wasi-libc
  - `wasm`: use wasi ABI for basic startup/stdout
* **boards**
  - `arduino`: make avrdude command line compatible with Windows
  - `arduino-nano`: add this board
  - `arduino-nano33`: fix UART1 and UART2
  - `circuitplay-bluefruit`: add this board
  - `digispark`: add clock speed and pin mappings
  - `gameboy-advance`: include compiler-rt in build
  - `gameboy-advance`: implement interrupt handler
  - `hifive1b`: add support for gdb subcommand
  - `pyportal`: add this board
  - `pyportal`: remove manual SPI pin mapping as now handled by default


0.11.0
---
* **command line**
  - add support for QEMU in `gdb` subcommand
  - use builtin Clang when building statically, dropping the clang-9 dependency
  - search for default serial port on both macOS and Linux
  - windows: support `tinygo flash` directly by using win32 wmi
* **compiler**
  - add location information to the IR checker
  - make reflection sidetables constant globals
  - improve error locations in goroutine lowering
  - interp: improve support for maps with string keys
  - interp: add runtime fallback for mapassign operations
* **standard library**
  - `machine`: add support for `SPI.Tx()` on play.tinygo.org
  - `machine`: rename `CPU_FREQUENCY` to `CPUFrequency()`
* **targets**
  - `adafruit-pybadge`: add Adafruit Pybadge
  - `arduino-nano33`: allow simulation on play.tinygo.org
  - `arduino-nano33`: fix default SPI pin numbers to be D13/D11/D12
  - `circuitplay-express`: allow simulation on play.tinygo.org
  - `hifive1-qemu`: add target for testing RISC-V bare metal in QEMU
  - `riscv`: fix heap corruption due to changes in LLVM 9
  - `riscv`: add support for compiler-rt
  - `qemu`: rename to `cortex-m-qemu`

0.10.0
---
* **command line**
  - halt GDB after flashing with `gdb` subcommand
  - fix a crash when using `-ocd-output`
  - add `info` subcommand
  - add `-programmer` flag
* **builder**
  - macos: use llvm@8 instead of just llvm in paths
  - add `linkerscript` key to target JSON files
  - write a symbol table when writing out the compiler-rt lib
  - make Clang header detection more robust
  - switch to LLVM 9
* **compiler**
  - fix interface miscompilation with reflect
  - fix miscompile of static goroutine calls to closures
  - fix `todo: store` panic
  - fix incorrect starting value for optimized allocations in a loop
  - optimize coroutines on non-Cortex-M targets
  - fix crash for programs which have heap allocations but never hit the GC
  - add support for async interface calls
  - fix inserting non-const values in a const global
  - interp: improve error reporting
  - interp: implement comparing ptrtoint to 0
* **cgo**
  - improve diagnostics
  - implement the constant parser (for `#define`) as a real parser
  - rename reserved field names such as `type`
  - avoid `"unsafe" imported but not used` error
  - include all enums in the CGo Go AST
  - add support for nested structs and unions
  - implement `#cgo CFLAGS`
* **standard library**
  - `reflect`: add implementation of array alignment
  - `runtime`: improve scheduler performance when no goroutines are queued
  - `runtime`: add blocking select
  - `runtime`: implement interface equality in non-trivial cases
  - `runtime`: add AdjustTimeOffset to update current time
  - `runtime`: only implement CountString for required platforms
  - `runtime`: use MSP/PSP registers for scheduling on Cortex-M
* **targets**
  - `arm`: add system timer registers
  - `atmega`: add port C GPIO support
  - `atsamd21`: correct handling of pins >= 32
  - `atsamd21`: i2s initialization fixes
  - `atsamd51`: fix clock init code
  - `atsamd51`: correct initialization for RTC
  - `atsamd51`: fix pin function selection
  - `atsamd51`: pin method cleanup
  - `atsamd51`: allow setting pin mode for each of the SPI pins
  - `atsamd51`: correct channel init and pin map for ADC based on ItsyBitsy-M4
  - `feather-m4`: add Adafruit Feather M4 board
  - `hifive1b`: add support for SPI1
  - `hifive1b`: fix compiling in simulation
  - `linux`: fix time on arm32
  - `metro-m4`: add support for Adafruit Metro M4 Express Airlift board
  - `metro-m4`: fixes for UART2
  - `pinetime-devkit0`: add support for the PineTime dev kit
  - `x9pro`: add support for this smartwatch
  - `pca10040-s132v6`: add support for SoftDevice
  - `pca10056-s140v7`: add support for SoftDevice
  - `arduino-nano33`: added SPI1 connected to NINA-W102 chip on Arduino Nano 33 IOT

0.9.0
---
* **command line**
  - implement 1200-baud UART bootloader reset when flashing boards that support
    it
  - flash using mass-storage device for boards that support it
  - implement `tinygo env`
  - add support for Windows (but not yet producing Windows binaries)
  - add Go version to `tinygo env`
  - update SVD files for up-to-date peripheral interfaces
* **compiler**
  - add `//go:align` pragma
  - fix bug related to type aliases
  - add support for buffered channels
  - remove incorrect reflect optimization
  - implement copying slices in init interpretation
  - add support for constant indices with a named type
  - add support for recursive types like linked lists
  - fix miscompile of function nil panics
  - fix bug related to goroutines
* **standard library**
  - `machine`: do not check for nil slices in `SPI.Tx`
  - `reflectlite`: add support for Go 1.13
  - `runtime`: implement `internal/bytealg.CountString`
  - `sync`: properly handle nil `New` func in `sync.Pool`
* **targets**
  - `arduino`: fix .bss section initialization
  - `fe310`: implement `Pin.Get`
  - `gameboy-advance`: support directly outputting .gba files
  - `samd`: reduce code size by avoiding reflection
  - `samd21`: do not hardcode pin numbers for peripherals
  - `stm32f103`: avoid issue with `time.Sleep` less than 200µs

0.8.0
---
* **command line**
  - fix parsing of beta Go versions
  - check the major/minor installed version of Go before compiling
  - validate `-target` flag better to not panic on an invalid target
* **compiler**
  - implement full slice expression: `s[:2:4]`
  - fix a crash when storing a linked list in an interface
  - fix comparing struct types by making type IDs more unique
  - fix some bugs in IR generation
  - add support for linked lists in reflect data
  - implement `[]rune` to string conversion
  - implement support for `go` on func values
* **standard library**
  - `reflect`: add support for named types
  - `reflect`: add support for `t.Bits()`
  - `reflect`: add basic support for `t.AssignableTo()`
  - `reflect`: implement `t.Align()`
  - `reflect`: add support for struct types
  - `reflect`: fix bug in `v.IsNil` and `v.Pointer` for addressable values
  - `reflect`: implement support for array types
  - `reflect`: implement `t.Comparable()`
  - `runtime`: implement stack-based scheduler
  - `runtime`: fix bug in the sleep queue of the scheduler
  - `runtime`: implement `memcpy` for Cortex-M
  - `testing`: implement stub `testing.B` struct
  - `testing`: add common test logging methods such as Errorf/Fatalf/Printf
* **targets**
  - `386`: add support for linux/386 syscalls
  - `atsamd21`: make SPI pins configurable so that multiple SPI ports can be
    used
  - `atsamd21`: correct issue with invalid first reading coming from ADC
  - `atsamd21`: add support for reset-to-bootloader using 1200baud over USB-CDC
  - `atsamd21`: make pin selection more flexible for peripherals
  - `atsamd21`: fix minimum delay in `time.Sleep`
  - `atsamd51`: fix minimum delay in `time.Sleep`
  - `nrf`: improve SPI write-only speed, by making use of double buffering
  - `stm32f103`: fix SPI frequency selection
  - `stm32f103`: add machine.Pin.Get method for reading GPIO values
  - `stm32f103`: allow board specific UART usage
  - `nucleo-f103rb`: add support for NUCLEO-F103RB board
  - `itsybitsy-m4`: add support for this board with a SAMD51 family chip
  - `cortex-m`: add support for `arm.SystemReset()`
  - `gameboy-advance`: add initial support for the GameBoy Advance
  - `wasm`: add `//go:wasm-module` magic comment to set the wasm module name
  - `wasm`: add syscall/js.valueSetIndex support
  - `wasm`: add syscall/js.valueInvoke support

0.7.1
---
* **targets**
  - `atsamd21`: add support for the `-port` flag in the flash subcommand

0.7.0
---
* **command line**
  - try more locations to find Clang built-in headers
  - add support for `tinygo test`
  - build current directory if no package is specified
  - support custom .json target spec with `-target` flag
  - use zversion.go to detect version of GOROOT version
  - make initial heap size configurable for some targets (currently WebAssembly
    only)
* **cgo**
  - add support for bitfields using generated getters and setters
  - add support for anonymous structs
* **compiler**
  - show an error instead of panicking on duplicate function definitions
  - allow packages like github.com/tinygo-org/tinygo/src/\* by aliasing it
  - remove `//go:volatile` support  
    It has been replaced with the runtime/volatile package.
  - allow poiners in map keys
  - support non-constant syscall numbers
  - implement non-blocking selects
  - add support for the `-tags` flag
  - add support for `string` to `[]rune` conversion
  - implement a portable conservative garbage collector (with support for wasm)
  - add the `//go:noinline` pragma
* **standard library**
  - `os`: add `os.Exit` and `syscall.Exit`
  - `os`: add several stubs
  - `runtime`: fix heap corruption in conservative GC
  - `runtime`: add support for math intrinsics where supported, massively
    speeding up some benchmarks
  - `testing`: add basic support for testing
* **targets**
  - add support for a generic target that calls `__tinygo_*` functions for
    peripheral access
  - `arduino-nano33`: add support for this board
  - `hifive1`: add support for this RISC-V board
  - `reelboard`: add e-paper pins
  - `reelboard`: add `PowerSupplyActive` to enable voltage for on-board devices
  - `wasm`: put the stack at the start of linear memory, to detect stack
    overflows

0.6.0
---
* **command line**
  - some portability improvements
  - make `$GOROOT` more robust and configurable
  - check for Clang at the Homebrew install location as fallback
* **compiler driver**
  - support multiple variations of LLVM commands, for non-Debian distributions
* **compiler**
  - improve code quality in multiple ways
  - make panic configurable, adding trap on panic
  - refactor many internal parts of the compiler
  - print all errors encountered during compilation
  - implement calling function values of a named type
  - implement returning values from blocking functions
  - allow larger-than-int values to be sent across a channel
  - implement complex arithmetic
  - improve hashmap support
  - add debuginfo for function arguments
  - insert nil checks on stores (increasing code size)
  - implement volatile operations as compiler builtins
  - add `//go:inline` pragma
  - add build tags for the Go stdlib version
* **cgo**
  - implement `char`, `enum` and `void*` types
  - support `#include` for builtin headers
  - improve typedef/struct/enum support
  - only include symbols that are necessary, for broader support
  - mark external function args as `nocapture`
  - implement support for some `#define` constants
  - implement support for multiple CGo files in a single package
- **standard library**
  - `machine`: remove microbit matrix (moved to drivers repository)
  - `machine`: refactor pins to use `Pin` type instead of `GPIO`
  - `runtime`: print more interface types on panic, including `error`
* **targets**
  - `arm`: print an error on HardFault (including stack overflows)
  - `atsamd21`: fix a bug in the ADC peripheral
  - `atsamd21`: add support for I2S
  - `feather-m0`: add support for this board
  - `nrf51`: fix a bug in I2C
  - `stm32f103xx`: fix a bug in I2C
  - `syscall`: implement `Exit` on unix
  - `trinket-m0`: add support for this board
  - `wasm`: make _main_ example smaller
  - `wasm`: don't cache wasm file in the server, for ease of debugging
  - `wasm`: work around bug #41508 that caused a deadlock while linking
  - `wasm`: add support for `js.FuncOf`

0.5.0
---
- **compiler driver**
  - use `wasm-ld` instead of `wasm-ld-8` on macOS
  - drop dependency on `llvm-ar`
  - fix linker script includes when running outside `TINYGOROOT`
- **compiler**
  - switch to LLVM 8
  - add support for the Go 1.12 standard library (Go 1.11 is still supported)
  - work around lack of escape analysis due to nil checks
  - implement casting named structs and pointers to them
  - fix int casting to use the source signedness
  - fix some bugs around `make([]T, …)` with uncommon index types
  - some other optimizations
  - support interface asserts in interp for "math/rand" support
  - resolve all func value targets at compile time (wasm-only at the moment)
- **cgo**
  - improve diagnostics
  - implement C `struct`, `union`, and arrays
  - fix CGo-related crash in libclang
  - implement `C.struct_` types
- **targets**
  - all baremetal: pretend to be linux/arm instead of js/wasm
  - `avr`: improve `uintptr` support
  - `cortexm`: implement memmove intrinsic generated by LLVM
  - `cortexm`: use the lld linker instead of `arm-none-eabi-ld`
  - `darwin`: use custom syscall package that links to libSystem.dylib
  - `microbit`: add blink example
  - `samd21`: support I2C1
  - `samd21`: machine/atsamd21: correct pad/pin handling when using both UART
     and USBCDC interfaces at same time
  - `stm32f4discovery`: add support for this board
  - `wasm`: support async func values
  - `wasm`: improve documentation and add extra example

0.4.1
---
- **compiler**
  - fix `objcopy` replacement to include the .data section in the firmware image
  - use `llvm-ar-7` on Linux to fix the Docker image

0.4.0
---
- **compiler**
  - switch to the hardfloat ABI on ARM, which is more widely used
  - avoid a dependency on `objcopy` (`arm-none-eabi-objcopy` etc.)
  - fix a bug in `make([]T, n)` where `n` is 64-bits on a 32-bit platform
  - adapt to a change in the AVR backend in LLVM 8
  - directly support the .uf2 firmware format as used on Adafruit boards
  - fix a bug when calling `panic()` at init time outside of the main package
  - implement nil checks, which results in a ~5% increase in code size
  - inline slice bounds checking, which results in a ~1% decrease in code size
- **targets**
  - `samd21`: fix a bug in port B pins
  - `samd21`: implement SPI peripheral
  - `samd21`: implement ADC peripheral
  - `stm32`: fix a bug in timekeeping
  - `wasm`: fix a bug in `wasm_exec.js` that caused corruption in linear memory
     when running on Node.js.

0.3.0
---
- **compiler**
  - remove old `-initinterp` flag
  - add support for macOS
- **cgo**
  - add support for bool/float/complex types
- **standard library**
  - `device/arm`: add support to disable/enable hardware interrupts
  - `machine`: add CPU frequency for nrf-based boards
  - `syscall`: add support for darwin/amd64
- **targets**
  - `circuitplay_express`: add support for this board
  - `microbit`: add regular pin constants
  - `samd21`: fix time function for goroutine support
  - `samd21`: add support for USB-CDC (serial over USB)
  - `samd21`: add support for pins in port B
  - `samd21`: add support for pullup and pulldown pins
  - `wasm`: add support for Safari in example


0.2.0
---
- **command line**
  - add version subcommand
- **compiler**
  - fix a bug in floating point comparisons with NaN values
  - fix a bug when calling `panic` in package initialization code
  - add support for comparing `complex64` and `complex128`
- **cgo**
  - add support for external globals
  - add support for pointers and function pointers
- **standard library**
  - `fmt`: initial support, `fmt.Println` works
  - `math`: support for most/all functions
  - `os`: initial support (only stdin/stdout/stderr)
  - `reflect`: initial support
  - `syscall`: add support for amd64, arm, and arm64
