mirror of
https://github.com/tinygo-org/drivers.git
synced 2026-07-31 13:07:48 +00:00
Ayke van Laethem
6763521eff
This type should be used whenever a sensor (or actuator?) works with a
temperature. For example, this commit changes the signature:
ReadTemperature() (int32, error)
to the following:
ReadTemperature() (drivers.Temperature, error)
I believe this is much clearer in intent. It also makes it trivial to
introduce common conversions. For example, there are already Celsius()
and Fahrenheit() methods to convert to the given units, as a floating
point. More units could be added as needed, for example a CelsiusInt().
220 lines
12 KiB
Makefile
220 lines
12 KiB
Makefile
|
|
clean:
|
|
@rm -rf build
|
|
|
|
FMT_PATHS = ./
|
|
|
|
fmt-check:
|
|
@unformatted=$$(gofmt -l $(FMT_PATHS)); [ -z "$$unformatted" ] && exit 0; echo "Unformatted:"; for fn in $$unformatted; do echo " $$fn"; done; exit 1
|
|
|
|
smoke-test:
|
|
@mkdir -p build
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adt7410/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/adxl345/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/amg88xx
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/apa102/itsybitsy-m0/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/at24cx/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bh1750/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/blinkm/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmi160/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp180/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/bmp280/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bmp388/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/sram/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=bluepill ./examples/ds1307/time/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/ds3231/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/easystepper/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espconsole/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/esphub/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/espat/espstation/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/flash/console/spi
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/flash/console/qspi
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/i2c/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/gps/uart/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/hcsr04/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/customchar/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hd44780/text/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/hd44780i2c/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/hub75/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/basic
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/basic
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/pyportal_boing
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/scroll
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/ili9341/scroll
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/ili9341/slideshow
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis3dh/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/lsm303agr/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/lsm6ds3/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mag3110/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp23017-multiple/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp3008/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mcp2515/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/microbitmatrix/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mma8653/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/mpu6050/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=p1am-100 ./examples/p1am/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setbuffer/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/pcd8544/setpixel/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino ./examples/servo
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pybadge ./examples/shifter/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/sht3x/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/i2c_128x32/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1306/spi_128x64/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/ssd1331/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7735/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/st7789/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/thermistor/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-bluefruit ./examples/tone
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/tm1637/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/fourwire/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=pyportal ./examples/touch/resistive/pyportal_touchpaint/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=itsybitsy-m0 ./examples/vl53l1x/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd2in13x/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=microbit ./examples/waveshare-epd/epd4in2/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/ntpclient/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/udpstation/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/tcpclient/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/wifinina/webclient/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/ws2812
|
|
@md5sum ./build/test.hex
|
|
ifneq ($(AVR), 0)
|
|
tinygo build -size short -o ./build/test.hex -target=arduino ./examples/ws2812
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=digispark ./examples/ws2812
|
|
@md5sum ./build/test.hex
|
|
endif
|
|
tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/bme280/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/microphone/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/buzzer/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=trinket-m0 ./examples/veml6070/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/simple/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l293x/speed/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/simple/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/l9110x/speed/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=nucleo-f103rb ./examples/shiftregister/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=hifive1b ./examples/ssd1351/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=circuitplay-express ./examples/lis2mdl/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino-nano33 ./examples/max72xx/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/dht/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=arduino ./examples/keypad4x4/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/alarm/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/clkout/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/time/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=xiao ./examples/pcf8563/timer/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m0 ./examples/ina260/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=nucleo-l432kc ./examples/aht20/main.go
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/sdcard/console/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=feather-m4 ./examples/sdcard/tinyfs/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/webclient/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/webserver/
|
|
@md5sum ./build/test.hex
|
|
tinygo build -size short -o ./build/test.hex -target=wioterminal ./examples/rtl8720dn/mqttsub/
|
|
@md5sum ./build/test.hex
|
|
|
|
DRIVERS = $(wildcard */)
|
|
NOTESTS = build examples flash semihosting pcd8544 shiftregister st7789 microphone mcp3008 gps microbitmatrix \
|
|
hcsr04 ssd1331 ws2812 thermistor apa102 easystepper ssd1351 ili9341 wifinina shifter hub75 \
|
|
hd44780 buzzer ssd1306 espat l9110x st7735 bmi160 l293x dht keypad4x4 max72xx p1am tone tm1637 \
|
|
pcf8563 mcp2515 servo sdcard rtl8720dn image cmd
|
|
TESTS = $(filter-out $(addsuffix /%,$(NOTESTS)),$(DRIVERS))
|
|
|
|
unit-test:
|
|
@go test -v . $(addprefix ./,$(TESTS))
|
|
|
|
test: clean fmt-check unit-test smoke-test
|